California City, CA • (21.7 miles) • Full Time • 10/7/2026

JOB DESCRIPTIONThe Senior Durability Technician provides 85–90% handson mechanical and electrical support for durability and corrosion testing on Hyundai, Kia, and Genesis vehicles. The role focuses on deep diagnostics, biweekly inspections, and highquality documentation to support engineering teams. You will perform complex troubleshooting and repair on prototype, development, and production vehicles; complete biweekly durability and corrosion inspections; and enter detailed findings into engineering databases. Work includes major component removal and installation (engine, transmission, driveline), AC service, and highvoltage procedures when trained. You’ll install and maintain data acquisition equipment, support vehicle teardowns, and collaborate directly with engineers to clarify issue

Lancaster, CA • (24.2 miles) • Full Time • 10/2/2026

Job Duties:Understand and apply blueprints and technical diagrams.Inspect electrical components including transformers, panels and circuit breakers.Use testing devices to identify and report electrical problems.Install and bend EMT/Rigid conduit, use hand and power tools, reading blue prints and able to reference codeSome labor intensive work such as trenching, demo and lifting and installing panels, light fixtures, etc.Install lighting, lighting controls, panels, switchgear, generator and ATS.LED retrofitting existing lighting.Electrical troubleshoot & repairs.Install EV charging stations.Inspects equipment and repair and replace as necessary to avoid downtime.Install new equipment at commercial and industrial locations. Maintains, trouble shoots, repairs and installs electrical equipment

Lancaster, CA • (24.2 miles) • Full Time • 10/1/2026

The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time.The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time.SUMMARYCompany Drivers provide various transportation services, the nature of which is dependent on the company for which they work. As a driver, you must have a safe driving record, follow all state and national driving laws, rules, and regulations.JOB DESCRIPTIONReasonable accommodations may be made to enable individua

Littlerock, CA 93543 • (41.5 miles) • Full Time • 9/26/2026

As a valued member of our team, an electrician performs all types of electrical jobs throughout assigned locations. Electrical jobs include maintenance and installation of equipment and machinery used in production and manufacturing.Benefits:PPO/HMO Health Insurance, Medical, Dental, Vision, LifePTO (Paid Time Off)401k Retirement PlanOvertime payDirect DepositStrong Safety ProgramEmployee Assistance ProgramEmployee Referral BonusEssential Functions:Perform electrical work and repairs on industrial equipment.Install, adjust, and maintain all electrical equipment, gauges, and instruments.Troubleshoot, evaluate, and coordinate electrical needs, repairs, and modifications.Ensure that the manufacturer’s standards of repair and maintenance are met on all equipment.Adhere to all rules and regulat

Bakersfield, CA 93307 • (42.2 miles) • Full Time • 9/23/2026

SUMMARY: Under the direction of the Central Kitchen Manager and the Central Kitchen Coordinator, the Food Production Driver will be responsible for delivery of food and supplies to various agency sites. The Central Kitchen Food Production Driver will also assist in meal preparation.

Santa Clarita, CA 91386 • (44.9 miles) • Full Time • 9/22/2026

A.S. Aerospace Inc.manufactures high strength specialty fasteners, including nuts, bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government and the most demanding customers in the aviation industry.We offer a competitive benefits package including medical, dental, vision, and a monthly bonus.General Aerospace Manufacturing Shop LaborerDepartment:General Aerospace Manufacturing Shop LaborerDepartment/ Area:ManufacturingPosition Summary:The candidate will be responsible for operating the CNC Lathe, running, and checking production.Daily tasks:Engage in general shop labor activities that may have a wide rage of different responsibilities at an entry level capacity. fasteners meeting quality and production targets

Lancaster, CA • (24.2 miles) • Full Time • 10/1/2026

Ensambladora (Assembler)Ubicacin: Lancaster, CAPago: $16.90 por horaInicio inmediatoHorario: Lunes a Viernes, 6:00am-2:30pmResponsabilidades:Ensamblar componentes mecnicos y elctricos.Utilizar herramientas manuales y elctricas de manera segura.Seguir instrucciones de trabajo y planos bsicos.Inspeccionar piezas y reportar problemas de calidad.Mantener el rea de trabajo limpia y organizada.Apoyar en tareas generales de produccin segn sea necesario.Requisitos:Experiencia en ensamblaje o produccin.Experiencia usando herramientas manuales y elctricas.Atencin al detalle y compromiso con la calidad.Se aceptan candidatos que hablen espaol.AssemblerLocation: Lancaster, CAPay: $16.90 per hourStart Date: Immediate openings available Hiring quicklySchedule: Monday through Friday, 6:00am-2:30pmResponsi

Valencia, CA • (44.1 miles) • Full Time • 9/20/2026

Job SummaryCicoil, a Trexon company, is hiring for a Production Assembler in Valencia, CA. The Production Assembler is responsible for the assembly and manufacturing of various types of cables used in electrical and electronic systems. The Production Assembler is responsible for ensuring the quality and functionality of the cables produced are up to standards.Essential Duties and Responsibilities• Cable Assembly: Perform the assembly of cables according to specific work instructions, engineering drawings, or diagrams. This includes cutting, stripping, crimping, and soldering wires and connectors, as well as routing cables and securing them with appropriate fasteners. • Quality: Ensure cables meet quality standards and specifications. Identify and rectify any defects or issues, such as loos

Valencia, CA • (44.1 miles) • Full Time • 9/15/2026

DescriptionConducts variety of electronic tests on parts to ensure unit functions according to specifications or to determine cause of unit failure by performing the following duties.Key ResponsibilitiesReads testing schedules, work orders, test manuals, performance specifications, and schematics to determine testing procedure and equipment to be used.Tests functional performance of parts under specified environmental conditions such as temperature change, vibration, pressure, and humidity.Calibrates test instruments according to specifications.Connects unit to test equipment.Reads dials and digital displays that indicate electronic characteristics such as voltage, frequency, distortion, inductance, and capacitance.Compares results with specifications and records test data or plots test re

Lancaster, CA 93534 • (22.8 miles) • Full Time • 10/9/2026

RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals.Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufact

Palmdale, CA • (31.7 miles) • Full Time • 10/8/2026

Tube Bending Technology is hiring an experienced CNC Programmer for our Apple Valley, CA manufacturing facility. This role will create and optimize programs for CNC mills and lathes, troubleshoot existing programs, improve cycle times, and help lead machine-shop workflow. Experience with Mastercam is strongly preferred. This position offers a Monday–Thursday schedule, $70,000–$100,000 annual compensation, benefits, relocation assistance program and advancement into a department lead role.https://thermaltubeinnovations.com/The CNC Programmer will be responsible for creating programs to be ran in our CNC mills and lathes that produce parts of the highest quality, to specification while keeping cycle time at a minimum. Additionally, responsible for the basic upkeep and corrections to existing

Valencia, CA • (44.1 miles) • Full Time • 10/8/2026

The Quality Manager is responsible for leading and strengthening the Quality organization by developing employees and frontline leaders, establishing clear accountability, improving quality performance, building customer confidence, and ensuring the department can support manufacturing, new product introduction, and business growth. Leading through Supervisors, Leads, and Quality Engineers, the Quality Manager builds an approachable, decisive, and high-performing leadership culture grounded in clear communication, constructive conflict resolution, trust, and high standards. A key priority is to build capabilitynot dependencyso employees and leaders are equipped and empowered to solve problems effectively at the appropriate level.Essential duties and Responsibilities The duties and responsi

Lancaster, CA • (24.2 miles) • Full Time • 10/8/2026

Lancaster, California | Field work | Contract, paid per shift or mission | $25 to $55 per hour About Service Robot Co. Service Robot Co. helps businesses across all 50 states choose, deploy and maintain commercial robots, with 24/7 support. We supply all types of robots for all types of automation. We handle site assessments, robot selection, installation, system integration and team training. Purchase, financing and rental options are available, backed by ongoing maintenance and repairs. One partner from your first consultation through everyday operation. The role Operate drones for security patrols, site monitoring, and inspections at customer sites. What you will do Complete pre-flight checks, operate the drone, and record the flight.Follow FAA Part 107 requirements and site-specific fl

Santa Clarita, CA 91350 • (45 miles) • Full Time • 10/7/2026

The Process Control Supervisor / Production Shift Supervisor will play a crucial role in optimizing the production processes, ensuring product quality, and managing resources effectively. This role will involve coordination between various production units, monitoring shift production operations, and implementing strategies to enhance operational efficiency.Key Responsibilities:Process Control Supervisor Duties:1. The employee performs a variety of tasks including overseeing and performing control room related tasks, supervising 5 employees, including employees responsible for the plant operation, monitoring and resolving plant related issues associated with plant equipment temperatures, equipment malfunctions, motion detector/sensor activations, making decisions associated with plant prod

Palmdale, CA 93551 • (30.9 miles) • Full Time • 10/5/2026

About the Role:The CNC Programmer plays a critical role in the manufacturing process by developing and optimizing computer numerical control (CNC) programs that guide automated machinery to produce precision parts and components. This position requires translating engineering drawings and specifications into detailed instructions for CNC machines, ensuring accuracy, efficiency, and adherence to quality standards. The CNC Programmer collaborates closely with engineers, machinists, and quality control teams to troubleshoot programming issues and implement continuous improvements. By leveraging advanced programming techniques and software, the role significantly contributes to reducing production time and minimizing material waste. Ultimately, the CNC Programmer ensures that manufacturing ope

Palmdale, CA • (31.7 miles) • Full Time • 10/3/2026

Alameda Metals is a recycling facility which recycles CRV bottles, cardboard, newspaper and all types of metals. This job is performed outside in our scrap yard. Please be aware you will be working out in the scrap yard most of the time. Must have knowledge of different types of metals and how to sort and process them.Should have forklift andBobcat experience. Starting pay based on experience and knowledge. Inexperienced persons need not apply.

Valencia, CA • (44.1 miles) • Full Time • 10/3/2026

Exciting opportunity for domestic & international travel! We are seeking an Aerospace Quality Control to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency.Responsibilities:Perform thorough examinations of all materials and finished productsConduct and report internal audits and evaluationsImplement and improve quality control operating proceduresIdentify and troubleshoot equipment problems and defectsParticipate in routine visual inspectionsMaintain a clean and safe work environmentQualifications:Previous work experience in quality control or other related fieldsStrong attention to detailStrong analytical and critical thinking skillsExcellent written and verbal communication skil

Valencia, CA • (44.1 miles) • Full Time • 10/3/2026

Must have experience on lathe machines. Need to be comfortable with reading blueprints and doing setups. Must be able to maintain tight, aerospace tolerances.Position is full time, 40 hoursMonday-Thursday, 4 am - 230pmPay rate $25-$36 depending on experience level.Healthcare, 401K and profit-sharing options avalible.

Palmdale, CA • (31.7 miles) • Full Time • 10/1/2026

This job is posted on behalf of TalentPro Consulting by Top Echelon.Milling Machine Machinist ( Palmdale, CA ) 1482-1476 - 206612 Month Contract Pay rate: $40-50 /hr Onsite US Citizenship required Ability to work 3/10 schedule and second shift.Job description: Sets up and operates horizontal, multi joint or vertical numerical control machines to perform machining operations such as compound angles and contours; boring compound angular holes; doing helical and spiral milling; serrating; and gear, spline, and keyway cutting and spray to exacting tolerances. Selects, mounts, and aligns various specialized machine attachments and standard or improvised tooling; follows sequence of operations, number of cuts required, and method of setup; determines, sets, and monitors speeds, feeds; interprets

Valencia, CA • (44.1 miles) • Full Time • 10/1/2026

CNC Lathe Machinist/Programmer – Level 3Starting at $35/hour | Monday–Friday | 2:30 PM–11:00 PMThis is an advanced CNC position responsible for the complete machining process, including operating, setting up, programming, and making program edits on Haas CNC lathes. The ideal candidate must be proficient in CNC programming, machine setup, tooling, offsets, blueprint reading, and troubleshooting.We are looking for a highly experienced CNC Lathe Machinist/Programmer who can confidently handle the full machining process from setup through production. This position requires someone who can work independently, troubleshoot machining issues, make program adjustments, and produce quality parts to print.Key ResponsibilitiesOperate Haas CNC lathesPerform complete machine setups for production runsP

Palmdale, CA • (31.7 miles) • Full Time • 10/1/2026

Responsibilities:Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.Basic Qualifications for Engineer Tool Design Required:Aerospace Industry experience Required.CATIA V5 experience Required.Aerospace Tooling experience required.• 6+ years of Catia design experience (high proficiency in 3D modeling and detailing).• Familiarity with Industry Standards related to Detailed Drawing Requirements, ANSI, ISO, etc.• Efficient in writing, communication and ability to manage technical details• Proficient with Microsoft office products - Outlook, Word, Excel, PowerPoint• Support in the design of testing and protot

Lancaster, CA 93534 • (22.8 miles) • Full Time • 9/27/2026

Metallurgist Job DescriptionPerform metallurgical testing and inspections on aerospace components to ensure quality and customer requirements.Responsibilities Perform metallurgical lab testing and sample preparation.Conduct cross-section, grain flow, hardness, and micro inspections.Support heat treat processes and review test results.Use microscopes, calipers, micrometers, and inspection equipment.Qualifications Bachelors in Materials Science or 5+ years of related experience.Aerospace metallurgy and laboratory testing experience.Experience with microreading, cross-sections, grain flow, and hardness testing.Knowledge of heat treating, blueprint reading, and quality inspection.Job Type & LocationThis is a Permanent position based out of Lancaster, CA.Pay and BenefitsThe pay range for this p

Palmdale, CA • (31.7 miles) • Full Time • 9/27/2026

Our busy high volume service department has an opening for an experienced Assistant Service Manager - Shop Foreman - Dispatcher.The individual will be responsible for assisting the Service Manager in running an efficient and profitable service department. You would be responsible for planning, organizing, leading, and controlling automotive service work and for ensuring the highest level of customer satisfaction.RESPONSIBILITIES INCLUDE, but may not be limited to:Works with the Service Manager to meet goals and objectives set for the department.Monitors and controls the performance of the department using appropriate reports, tracking systems, and surveysEnsures that the technicians’ time is consistently managed.Maintains open communications and good relationships with other service depart

Lancaster, CA • (24.2 miles) • Full Time • 9/25/2026

The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time.The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Management retains the discretion of adding or changing the duties of the position at any time.SUMMARY QE is responsible for ensuring incoming parts from supply chain companies and internally produced components/vehicles meet the quality standards and systems required.JOB DESCRIPTION• Responsible for ensuring that the products produced meet quality standards required to minimize quality costs and maximize customer

Valencia, CA CA 91355 • (44.1 miles) • Full Time • 9/24/2026

Company Description Arvato is an innovative and leading global 3PL service provider in supply chain management and e-commerce. With 20,000 team members at over 100 locations, we focus on the Consumer Products, Tech, Healthcare, Automotive and Publisher industries. You will work in an environment built on collaboration, respect, commitment and curiosity, where you can grow, contribute your ideas, and make an impact. Be part of the team that delivers logistics excellence and shapes supply chains globally. Working at Arvato means: Together, we’re on it.Job Description The Web Operator is responsible for operating various types of machine equipment including but not limited to perfect binders, saddle stitchers, laminators, folders, die-cutters, flat-bed cutters, high-speed laser printers, and

Lancaster, CA 93535 • (30.3 miles) • Full Time • 9/19/2026

On-SiteLancaster, CAWe are seeking an experienced and detail-oriented Quality Control Manager to oversee quality control activities and ensure that products, materials, processes, and operations meet established company, industry, and regulatory standards and requirements.The Quality Control Manager will lead quality control initiatives, develop and maintain quality procedures, monitor performance, investigate quality issues, and work closely with production, engineering, operations, purchasing, and other departments to identify root causes and implement effective corrective actions. The ideal candidate is a strong leader with excellent analytical, organizational, and problem-solving skills.Minimum QualificationsBachelor’s degree in quality, Engineering, Manufacturing, Science, Business, o

Valencia, CA 91355-5413 • (44.1 miles) • Full Time • 9/18/2026

Description: Shift: Monday–Thursday, 1:00 PM – 11:30 PM (4/10 Schedule). “Overtime may be required based on production needs."Compensation: Hourly Position Summary:Air Flow Research (AFR), a leader in high-performance cylinder head manufacturing, is seeking a skilled Machinist with experience or aptitude in machine operations. This role is crucial in ensuring precise CNC machining for our premium racing and street-performance cylinder heads.Requirements: Key Responsibilities:•Operate CNC machines to perform complex porting and machining operations on aluminum cylinder heads.•Set up fixtures and tooling based on job specifications.•Monitor and adjust machine parameters to ensure quality and consistency.•Interpret engineering drawings and production documentation.•Perform in-process inspecti

Lancaster, CA 93536-4125 • (24.2 miles) • Full Time • 9/17/2026

REQUIREMENTS:A PICKUP TRUCK OR VAN TO WORK OUT OFAGE 18 OR OLDERVALID & CURRENT DRIVER LICENSE AND VEHICLE INSURANCEJOB HIGHLIGHTS:NO PRIOR JOB EXPERIENCE REQUIRED!Close-knit, non-corporate, and family owned and operated work atmosphere where you are more than just a number.Several advancement opportunities as you master your craft.Dynamic variety of customers and locations to service across Los Angeles, Kern, and San Bernardino Counties, so each day feels different.Semi-flexible scheduling that can accommodate a variety of needs as important life moments happen.JOB BENEFITS:48 Hours of PTO available after one year of employment, and granted at the start of each calendar year thereafterAdditional time off provided on/around major holidays, including select paid days.Health, Dental, and Vis

Edwards, CA 93523 • (19.8 miles) • Full Time • 10/8/2026

Position is contingent upon contract award with an anticipated start date of September 2026.Location: NASA Armstrong Flight Research Center (AFRC), Edwards, CaliforniaSupport NASA's Occupational Health MissionH&L Environmental Services is seeking an Environmental Health Technician to support NASA Armstrong Flight Research Center's Occupational Health Program.This position supports Environmental Health activities including industrial hygiene, exposure assessment, hearing conservation, health physics, laser safety, ergonomics, workplace evaluations, and occupational exposure monitoring. The successful candidate will work closely with Industrial Hygienists, Health Physicists, Occupational Medicine personnel, engineers, scientists, and operational staff to help identify, evaluate, and control

Tehachapi, CA • (15.1 miles) • Full Time • 9/30/2026

Location Status: Work will be primarily performed at a designated field worksite location based out of a central Race Communications worksite. Frequent travel to and work from other Race offices or other off-site locations will be required.100% Company-Paid Medical and Dental BenefitsFree Fiber Internet ServiceComp: $28-$32 per hourWho We Are:We're more than a fiber internet provider, we're your neighbors, committed to connecting California communities since 1994. At Race, relationships matter as much as speed. We combine cutting-edge technology with a genuine, people-first approach that makes every interaction feel personal. Our team operates like family: collaborative, supportive, and dedicated to making a real difference. When you join Race, you're not just accepting a job, you're becom

California City, CA • (21.7 miles) • Full Time • 9/30/2026

Join a Company Built for Technical Solutions and Growth!At Groome Industrial Service Group (GISG), we help power generation and heavy industrial customers protect critical assets, extend equipment life, reduce downtime, and safely execute complex maintenance and coatings projects.The Technical Specialist will join our Engineering department and serve as a technical resource to the Sales team by reviewing coating specifications, supporting customer solutions, estimating, and helping translate field conditions into accurate scopes of work and proposals.This role is ideal for a technically strong coatings professional who understands industrial environments, coating systems, surface preparation, inspection requirements, application methods, and industry standards such as AMPP.Why Groome?Techn

Mojave, CA 93501 • (0 miles) • Full Time • 9/26/2026

Rolling Mill Process EngineerDepartment: OperationsReports To: Rolling Mill Area ManagerLocation: Mojave, CaliforniaPosition SummaryThe Rolling Mill Process Engineer supports construction, commissioning, stabilization, and continuous improvement of Pacific Steel Group's state-of-the-art steel manufacturing and recycling micro-mill in Mojave, California. This hands-on role works closely with Operations, Quality, Maintenance, OEMs, suppliers, and plant support teams to optimize rolling mill processes, equipment performance, product quality, production efficiency, and employee capability.1 - Essential Duties and ResponsibilitiesRolling Mill Design, Construction & CommissioningSupport the design, construction, and commissioning of the new rolling mill.Define the types and quantity of mill roll

Edwards, CA • (18.4 miles) • Full Time • 9/24/2026

Description: About Valor HealthcareValor Healthcare is a veteran- and physician-led provider of healthcare services for deserving, resilient patriots – including those who serve or have served in the military as well as those who devote their careers to government service. We aim to deliver high-quality care in a way that upholds the health of our nation’s greatest asset: its people. Valor works hard to earn the trust of those who have faith in us to care for them with respect and through methods that lead to superior clinical outcomes.Valor is different because of our people.Our leadership team is comprised of veterans, clinicians, and business leaders dedicated to providing exceptional care and world-class patient experience.Many of our colleagues have patriots in their families or are p

Mojave, CA • (2.9 miles) • Full Time • 9/23/2026

Our client is a growing heavy industrial manufacturing and fabrication operation seeking Fabrication Technicians to support daily production activities. These positions are responsible for safely operating fabrication equipment to produce finished steel components that meet precise specifications for commercial, industrial, and infrastructure projects. Successful candidates will work in a fast-paced production environment while maintaining the highest standards of safety, quality, and efficiency.Key ResponsibilitiesOperate fabrication machinery and equipment to accurately produce finished rebar steel products according to production specifications and work orders.Interpret production drawings, cut lists, bend schedules, and fabrication instructions to ensure dimensional accuracy.Perform ro

Bakersfield, CA 93307 • (42.2 miles) • Full Time • 9/21/2026

***This position is Onsite, not hybrid, not remote***What You’ll DoThe Process and Production Coordinator is responsible for coordinating daily production activities, supporting operational performance, and fostering a safe, productive, and engaged work environment. This role partners with production teams and cross-functional departments to ensure safety, quality, delivery, and cost objectives are achieved while driving continuous improvement through the Operational Excellence System (OES). The Process and Production Coordinator provides direction, coaching, and support to team members, promotes standardized processes, monitors performance metrics, and helps ensure efficient workflow and operational excellence.Comply with the Quality System Manual, operating procedures, work instructions,

Bakersfield, CA 93307 • (42.2 miles) • Full Time • 9/18/2026

THE ROLE:This position will report to the: Plant DirectorTravel Requirement:15%Location: Bakersfield, CAFLSA Status: ExemptEmployment Category: Full Time- RegularPay Range:$110,000-$130,000 D.O.E + Annual Bonus OpportunityGenerous Brandsis dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages.Bolthouse Farmsis a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMB

Mojave, CA • (2.9 miles) • Full Time • 9/15/2026

DescriptionThe Propulsion Test Team at Impulse Space is responsible for designing, building, and operating world class test stands to support the development and production of engines and propulsion components that will serve in Impulse’s goal of pioneering the future of in-space transportation. This team is located at the Mojave Air & Space Port which is home to many firsts in air and space development. As a Automation & Controls Specialistat Impulse, you will be responsible for the installation and troubleshooting of test equipment related to rocket propulsion testing. This includes electrical wiring, pneumatics, PLCs, and industrial controls hardware.ResponsibilitiesInstall industrial controls hardware to NFPA 70 and NFPA 79 standardsWire and/or modify control panels to UL508A standards

Arvin, CA • (35.6 miles) • Full Time • 9/15/2026

Job Summary: CAD Engineer:We are seeking an experienced CAD Engineer to model structures and building components for Plant projects utilizing our next-generation Plant Building System (PBS) components. Joining a small, but rapidly growing engineering team, the PBS CAD Engineer will follow Plant’s industry-leading best practices to create shop drawings, takeoffs, machine files, and executable BOMs. The position will also work with factory management and production teams to continuously improve Plant’s virtual fabrication and operational processes, driving production efficiency and accuracy with a design-for-manufacture mindset. This position reports to the Manager of Engineering.Core Responsibilities: CAD Engineer:Seamlessly integrate Revit files and PDF plans to CAD and CAM data as require

Lancaster, CA 93534 • (22.8 miles) • Full Time • 10/6/2026

Title:OSPFieldEngineer.Location: Lancaster, CA.Type:Longtermproject.PositionOverview:TheOSPFieldEngineerperformsfieldsurveysandcollectsdatatosupportfiber opticandtelecommunicationsengineeringprojects.Thisroledocumentsexistingaerialandundergroundutilityconditions,validatesroutes,capturesmeasurements,andensuresallinformationrequiredforaccuratedesignandpermittingiscollected.KeyResponsibilities:Performfieldwalkstodocumentpoles,underground(UG)paths,utilities,right-of-way(ROW)boundaries,andsiteconditions.Capturerequiredphotos,includingpoletags,poleheights,cablelabels,MPOE,handholes,anchors,clearances,andobstructions.Measurespans,attachmentheights,mid-spanclearances,andaccuratelyrecordGPScoordinates.TakedetailedfieldnotesfollowingOSPDesignPrinciplesandmaintainaccurateroutedocumentation.Convertfie

Bakersfield, CA 93307 • (42.2 miles) • Full Time • 10/2/2026

Description: Position Purpose:The Lead Service Technician diagnoses and completes repairs on customer vehicles in a professional, timely manner while ensuring quality repairs at a fair cost to the customer.The Lead Service Technician diagnoses and creates repair strategies for other technicians to follow and complete.The Lead Service Technician will assist in mentoring and guiding other technicians in their repairs & stay up to date on all factory training.***Electric Power Generation experience and/or Electric Vehicle experience is a plus.***Pay Range: $45.00/Hour - $60.00/HourKey Relationships:The Lead Service Technician works directly with the Service Team – all personnel & Managers. The Lead Service Technician will communicate with the Service Team as the course of duties relate to the

Mojave, CA 93501 • (0 miles) • Full Time • 10/2/2026

Description: SUMMARYTerra-Gen is seeking a PV/BESS (Photovoltaic / Battery Energy Storage System) O&M (Operations & Maintenance) Technician III to perform scheduled and unscheduled fieldwork required to operate and maintain the Edward / Sanborn projects to standards above industry best practice. Fieldwork includes, but is not limited to installing new systems, troubleshooting, testing, preventive maintenance, corrective maintenance, and assisting site visits. The PV/BESS Technician may also be assigned the responsibility for observing the quality and safety practices of contractors performing PV/BESS technical maintenance and commissioning type work. The ideal candidate would be a self-starter and reports to and takes directions from the Operations Site Supervisor. The site is located in t