Morgan Hill, CA • (39.6 miles) • Full Time • 9/12/2026

About the job:The Operator 2 is a hands-on manufacturing role responsible for precision assembly and solderingof microelectronic products.We’re looking for someone who: Has a high school diploma or GED (some college preferred) Brings 1–2 years of experience in soldering or microelectronic assembly Demonstrates excellent manual dexterity, hand-eye coordination, and attention to detail Can work up to eight hours under a microscope using small hand tools Has experience assembling SMT and connectorized products Is knowledgeable in manufacturing processes, safety practices, and equipment maintenance Communicates effectively with leads, technicians, supervisors, and management Works well independently while contributing positively to a team Is willing to participate in on-the-job training as nee

Morgan Hill, CA 95037 • (38.9 miles) • Full Time • 9/11/2026

Senior Buyer/Production PlannerMorgan Hill, CA 95037POSITION SUMMARY:The Senior Buyer / Production Planner is responsible for end-to-end material procurement and production scheduling in support of aerospace manufacturing operations.This role ensures alignment between supply and demand by owning purchasing strategy, managing supplier performance, and developing executable production schedules.The position plays a critical role in driving on-time delivery, optimizing inventory levels, and ensuring material and capacity readiness to meet customer commitments.Procurement & Supplier ManagementLead sourcing, purchasing, and supplier management for all production materialsNegotiate pricing, lead times, and commercial terms to achieve cost & delivery targetsDrive supplier performance in on-time d

Hollister, CA • (32.4 miles) • Full Time • 9/10/2026

When lives depend on performance, the word depends on us. We help astronauts launch on the moon, satellites in space, eject pilots in the air, protect military and law enforcement, and make products that bring hero’s home. At Pacific Scientific Energetic Materials Company (PacSci EMC), we are committed to solving tomorrow’s problems, today. Now is your chance to make a difference. We are hiring immediately for a full time, Electronic Assembler. With a culture rooted in continuous improvement, this role is mission critical.Your role:As an Electronic Assembler you can expect to be our go-to for driving continuous improvement in the electronics production process. More specifically, in this role, you:Performs various production assembly operations on components and subassemblies, and other co

Aromas, CA 95004 • (23.5 miles) • Full Time • 9/7/2026

Experienced foreman position available for tree service. Must have experience and knowledge of leading and delegating a tree crew for day to day operations. Must have experience in all aspects of tree work such as climbing, rigging, running equipment, driving company trucks and trailers, removing trees, pruning trees, communicating with customers, working positively in a team environment and staying on schedule. Must have a valid drivers license, working vehicle to get to and from the company yard, speak English and be mentally and physically ready to work Monday-Friday. Pay day is once per week. No benefits offered. Rate depends on quality of work and experience. Call or text.\nCompany DescriptionAdney Tree Service Inc. Is a growing company focused on taking care of our customers and thei

Salinas, CA • (15.3 miles) • Full Time • 9/5/2026

Power Generator TechnicianJoin our team as a Power Generator Technician in City of Industry! We are seeking experienced technicians with a strong background in diesel engines, power generation equipment, and CAT systems. This is a great opportunity to work on high-demand standby generators while growing your career with a stable and reputable company.What You’ll Do:Perform preventative and corrective maintenance on standby generator systems ranging from 5 kW to 3200 kWDiagnose, troubleshoot, and repair diesel and gas industrial enginesWork with CAT engines and power generation systemsPerform and follow proper procedures for load bank testingTroubleshoot AC/DC control systems and emergency repair situationsRead and interpret wiring diagrams and electrical schematicsUnderstand and work with

Salinas, CA • (15.3 miles) • Full Time • 9/2/2026

Job OverviewWe are seeking an experienced CNC Machinist to join our team. In this role, you will operate and set up CNC machines to manufacture high-precision components while maintaining strict quality and safety standards.The ideal candidate will have strong experience working with HAAS, Akira Seiki, and Doosan machines, a solid understanding of machining processes, and the ability to read and interpret technical drawings and specifications.DutiesSet up and operate CNC machines.Read Blueprints, tooling and set up.Set-up, edit and run all facets of work assigned.Inspect and measure parts to maintain in-process controls charts.Monitor machine operation to detect malfunctions and adjust machine controls as needed.Ensure company procedures and “best machine practices” are being followed and

Castroville, CA 95012 • (15.3 miles) • Full Time • 8/30/2026

Biopharmaceutical Research Company is located in the Watsonville-Salinas area of Monterey County; we are a pharmaceutical startup that has been licensed by the DEA to produce Schedule I substances in a highly regulated and secure environment. Our focus is the cultivation of federally legal cannabis for drug development and research. As one of the first companies in the US to receive this approval, we are seeking to grow our team with individuals that thrive on the complex and unpredictable challenges of navigating a new industry. Overview:Reporting to the Production Manager, you will be responsible for the care and maintenance of cannabis plants in a commercial indoor production facility. As a Production Technician, your hard work will be reflected every day in the health of our plants, th

Gilroy, CA 95020 • (34.2 miles) • Full Time • 8/26/2026

CNC Machinist/Setup/Operator for an expanding machine shop in Gilroy, CAThis is a full-time position for the day-shift with an immediate opening. Day shift is 7:00 am - 3:30 pmPRIMARY RESPONSIBILITIES AND AUTHORITYSetup/Operate CNC Machines.Recognize trends in machine performance and ability to make necessary adjustments to maintain stringent part requirementsMake suggestions for improvement in areas of cost reductions, processes, quality and productivitySKILLS AND QUALIFICATIONSMust have a minimum of 5 years setup and operations experienceExperience and knowledge of the capabilities and differences of various CNC Machines and their controlsKnowledge cutting aluminum and stainless steelAbility to use measuring instruments such as calipers, micrometers, indicatorsKnowledge of tool holders,

San Jose, CA 95119 • (44.2 miles) • Full Time • 8/25/2026

Job Summary: We are seeking a skilled and motivated Equipment Maintenance Technician to support and maintain production tools in our wafer manufacturing line. The ideal candidate is a proactive problem-solver who thrives in a fast-paced cleanroom environment, demonstrates initiative, and works effectively both independently and as part of a team. Key Responsibilities P erform preventive and corrective maintenance on wafer fabrication tools using established procedures and on-the-job training (OJT). Accurately document all maintenance activities in tool logbooks and CMMS (Computerized Maintenance Management System). Troubleshoot and repair equipment to identify root causes and ensure long-term reliability. Support Tool Owners and Equipment Engineers in improving tool performance and uptime.

Morgan Hill, CA 95037 • (38.9 miles) • Full Time • 9/5/2026

DescriptionSenior Material Planner:Customer Programs | Contract Manufacturing | Shortages & Material ReadinessOur client is seeking a highly motivated Senior Asset Manager / Material Planner to support customer programs within a fast-paced contract manufacturing environment. This role serves as the primary point of accountability for material readiness, shortage management, and customer communication to help ensure production schedules are met.The ideal candidate is a hands-on planner who thrives in a highly collaborative environment, enjoys solving material-related challenges, and takes ownership from identification through resolution. This individual will work closely with Program Managers, Production Planning, Buyers, Operations, and customers to proactively drive material availability

Santa Cruz, CA 95060 • (31.6 miles) • Full Time • 9/3/2026

Controls EngineerJoby Aviation · Advanced Equipment Solutions (AES) Engagement 3-6 month contract with possibility of direct hire at end of contract Locations Marina, Watsonville, and Santa Cruz, California (can also work hybrid schedule) Work model At least 50% on-site; project needs determine the worksite. Commissioning, debug, panel work, and machine-down response happen on site and those weeks run heavier. Programming and documentation can be done remotely. We would rather have the right engineer on a flexible schedule than the wrong one full-time. Target start As soon as the right candidate clears selection and onboarding Reports to Manager, Advanced Equipment Solutions who owns platform architecture, tag standards, and safety philosophy for this group About the teamAdvanced Equipment

Morgan Hill, CA 95037 • (38.9 miles) • Full Time • 9/2/2026

Salary: $80k - 114.4k per year + none Reference: AB_5037911 Are you a skilled CNC Machinist who takes pride in precision craftsmanship? We are seeking an experienced CNC Setup & Operator Machinist with Multi-Axis Turning experience on CNC Lathe Machines to join a precision-driven manufacturing team. Programming expertise using Mastercam is required, and experience with ESPRIT is a plus.In this role, you’ll work on high-complexity components, including Class 1, 2, and 3 Medical Devices and critical ISO 9001-controlled products. If you thrive in an environment where your expertise in tight tolerances, multi-axis setup, and offline programming is valued, this is the place for you.QualificationsMulti-Axis Lathe Expertise: 3+ years of hands-on experience setting up and operating Multi-Axis CNC

Morgan Hill, CA • (39.6 miles) • Full Time • 8/22/2026

Job Title: CNC MachinistJob Summary:We are seeking a skilled CNC Machinist with experience machining materials to produce precision components. The ideal candidate understands the unique properties of metals and can set up, program, and operate CNC equipment to meet tight tolerances and quality standards.Key Responsibilities:Set up, program, and operate CNC mills to machine componentsInterpret blueprints, technical drawings, and CAD modelsSelect appropriate tooling, speeds, and feeds for various materials (Aluminum, Steel, Stainless, Copper, Brass and Plastics)Monitor machining processes and make adjustments to ensure part quality and dimensional accuracyPerform first article inspections and in-process quality checks using measuring tools (calipers, micrometers, gauges)Optimize programs an

Marina, CA 93933 • (7.9 miles) • Full Time • 9/13/2026

Come Join Our Team: We take pride in building quality productsand enriching the lives of those who make it possible. As a growing company, we invest in our people, our processes, and the technology that drives our success. We believe that when our team members thrive, our company thrives. We offer opportunities for career growth in a supportive, hands-on environment where your contributions make a difference every day. Most importantly, you’ll be part of a positive, team-oriented culture where autonomy is earned, hard work is rewarded, and every employee’s voice matters. Come grow with us and help shape our future!Who We Are: Fox Thermal and Sierra Instruments are leading manufacturers of high-performance thermal mass flow sensors, with decades of experience advancing flow measurement tech

Marina, CA 93933 • (7.9 miles) • Full Time • 9/12/2026

Service TechnicianLocation: Marina, CA | Company: Rutherford Management CompanyDo you take pride in your work, thrive on variety, and enjoy solving problems with a smile? We're looking for a Service Technician who's passionate about maintaining beautiful, high-functioning communities and creating exceptional living experiences for our residents.At Rutherford Management Company, our hospitality-first culture means we don't just fix things-we take care of people. As a Service Technician, you'll play a key role in creating clean, safe, and welcoming homes by responding to maintenance requests, preparing apartments for move-ins, and keeping our communities looking sharp.What You'll Do:Knock out service requests with skill and a customer-first mindsetGet apartments ready for move-in fast, detai

Watsonville, CA • (23.5 miles) • Full Time • 9/12/2026

DescriptionReports To: Co-Packing Production ManagerEmployment Type: Full-Time, Regular Department: Food Business Development Program FLSA Status: Non-Exempt Location: El Pajaro CDC’s Commercial Kitchen Incubator, Watsonville Pay Rate: $18.00–$20.00 per hour Mission Edge is proud to support El Pajaro Community Development Corporation in their recruitment efforts. This position is a direct hire for El Pajaro CDC, not Mission Edge. All employment, supervision, and reporting for this role will be with El Pajaro CDC.Position Summary The Production Line Leader is a hands-on supervisory role responsible for driving the performance, quality, and efficiency of a dedicated production line at El Pjaro CDC Co-packing. This role is the frontline leader that keeps operations running smoothly, directly

Hollister, CA 95023 • (36.7 miles) • Full Time • 9/11/2026

Description:Job Summary: Cimino's Cabinet Doors, a trusted name in custom solid wood cabinet doors since 1978, is seeking a dependable and detail-oriented Delivery Driver to join our team. In this role, you will play an integral part in ensuring our handcrafted products are delivered promptly and safely to our valued customers. If you take pride in providing excellent service and working with a company dedicated to quality craftsmanship, we’d love to have you on board Key Responsibilities: - Safely and efficiently deliver custom cabinet doors to residential, commercial, and professional woodworking customers. - Load and unload orders carefully to prevent damage to products. - Follow pre-planned routes and delivery schedules to meet customer deadlines. - Perform regular vehicle inspections

Santa Cruz, CA 95065 • (30.9 miles) • Full Time • 9/11/2026

Design Hire is partnering with an exceptional client whose engineering team delivers thoughtful, high-impact building solutions across a diverse range of projects. As a Mechanical Engineer, you will help transform project requirements into coordinated, technically sound designs while working alongside experienced engineers and project teams. This is an opportunity to contribute to an organization that values strong collaboration, quality work, and practical engineering solutions from concept through construction. Key Responsibilities Lead HVAC System Design, Plumbing System Design, and Fire Protection System Design for a variety of building projects. Develop MEP Design documents and technical deliverables using Autodesk Revit, Revit Modeling, and Building Systems Modeling. Perform Enginee

Gilroy, CA • (32.9 miles) • Full Time • 9/11/2026

At PEARCE, we've got a career for you!Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://ww

Morgan Hill, CA 95037 • (38.9 miles) • Full Time • 9/11/2026

Overview We are seeking a skilled Swiss Screw Machinist to join our dynamic team in Morgan Hill, CA. In this role, you will play a crucial part in the production of precision components using advanced Swiss machining techniques. If you have a passion for precision engineering and a keen eye for detail, we want to hear from you! Responsibilities Set up and operate Swiss screw machines to produce high-quality precision parts.Read and interpret blueprints, technical drawings, and specifications.Monitor production processes and make necessary adjustments to maintain quality standards.Perform routine maintenance and troubleshooting on machines to ensure optimal performance.Collaborate with engineering and quality assurance teams to improve processes and product quality.Maintain a clean and orga

Morgan Hill, CA 95037 • (38.9 miles) • Full Time • 9/11/2026

JOB SUMMARYOperator Level 2 must have good technical knowledge and process great manual dexterity. Ability to read instructions represented in manuals, drawings, schematics, etc. and follow them with precision. Will use your hands or machines to do the job with great precision and accuracy.This is a temp-to-hire position ESSENTIAL DUTIES AND RESPONSIBILITIESAssemble products using soldering iron, microscope, and various small hand tools.Follow instructions on assembly/outline drawings, bill of materials, and work instructions.Use dispensing equipment to manually apply epoxy for staking.Mechanical assembly using small power tools.Solder seal stainless steel housings to gross leak and non-gross leak standards.Use hot plates and soldering irons to solder microelectronic assemblies such as dio

Morgan Hill, CA • (39.6 miles) • Full Time • 9/11/2026

For nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors We are searching for a qualified Quality Mechanical Inspector in the San Jose, CA Area. This is a part-time opportuni

Los Gatos, CA 95030 • (43.9 miles) • Full Time • 9/11/2026

City Wide Facility Solutions is the nation's leading management company in the building maintenance industry, providing facility solutions to commercial properties across the South Bay and Santa Cruz areas. We are seeking a detail-oriented Night Quality Assurance Manager to join our team part-time.City Wide manages facility services through a network of Independent Contractors (ICs) independent businesses that employ their own crews. As Night Quality Assurance Manager, you are City Wide's quality-assurance and contract-compliance representative in the field after hours. You visit client buildings on a nightly route, inspect completed work against each account's scope of work, document what you find, and communicate directly with the IC's owner or authorized representative so any deficiency

Monterey, CA 93940 • (9.8 miles) • Full Time • 9/10/2026

Why CIG?At Capital Insurance Group we offer our employees more than just a job. We foster career growth, provide opportunities to give back to our communities, and help you take the next step in your career!CIG was founded in 1898 by a group of earnest farmers in need of protection and today, we are the leading West Coast Property & Casualty insurer. CIG is certified as a Great Place to Work and provides a collaborative, inclusive, and fun work culture for all employees.Why choose CIG’s Information Technology Team?Part of the Information Services department at CIG, the Information Technology (IT) organization delivers all internal and external technology solutions at CIG. This is your opportunity to join a fast-paced team dedicated to delivering a high-quality technology experience to empl

Salinas, CA 93908 • (15.7 miles) • Full Time • 9/10/2026

The Role:The Maintenance Planner works closely with the Sr. Refrigeration Manager on overseeing maintenance activities, managing inventory, and providing administrative support to maintenance supervisors and technicians. Additionally, Maintenance Planners manage third-party contractors such as fabricators, plumbers, HVAC, industrial refrigeration & electricians to accomplish the maintenance tasks of our refrigeration and cooling operations within our three main cooling facilities.The primary goal is to ensure the safe, efficient, and reliable performance of all refrigeration and cooling equipment at all our facilities. This role will require leadership skills and passion for driving continuous improvement. In this highly visible role, you will drive a proactive culture that results in supe

Watsonville, CA 95076 • (25.1 miles) • Full Time • 9/10/2026

Job Title: Class 1A, Controls Technician & ProgrammerDepartment:Engineering and MaintenanceReports To:Engineering & Maintenance Project ManagerPosition Type:Full-time, RegularShift:Day, Swing, NightLocation:Watsonville, CAFLSA Status:Non-exempt, UnionCompany OverviewSince 1868, the Martinelli family has been producing award-winning apple juice. Located in the cool California Central Coast, the fertile Pajaro Valley produces the most flavorful apple varieties in the world. Since winning its first gold medal in 1890, Martinelli’s has received more than fifty gold medals for product excellence. Distribution of Martinelli’s Gold Medal® products now extends to every state in the U.S. and globally.Job SummaryThe Controls Technician/Programmer is responsible for maintaining, troubleshooting, and

Santa Cruz, CA • (28 miles) • Full Time • 9/10/2026

Workplace Type: Hybrid, on-site in Santa Cruz an average of 4-days per week At Capstan Medical, we’re building one of the most exciting and innovative companies in medtechdeveloping a first-of-its-kind robotic platform for minimally invasive heart valve treatment. Our team combines surgical robotics, catheter-based delivery, and next-generation implants to transform complex procedures into safer, lower-stress solutions for patients and clinicians alike. As a highly collaborative, hands-on team, we move fast, wear multiple hats, and believe the best ideas can come from anyone.Based in Santa Cruz, our unique workspace blends cutting-edge Bay Area innovation with a lifestyle-driven environment near trails, beaches, and open spacecreating the perfect place to do meaningful, career-defining wor

Seaside, CA 93955 • (5.1 miles) • Full Time • 9/9/2026

Job Description: $5,000Sign On Bonus Based on Experience Automotive Service Technician The Automotive Service Technician services and repairs vehicles following all established standards and procedures. In addition, they may be assigned to conduct pre-delivery service on new vehicles to ensure excellent working order for the customer. The Service Technician must deliver the highest quality service while maintaining the highest level of customer satisfaction. The ideal candidate has experience which may include: a high school diploma or GED, some post-secondary automotive training, dealer-level or large facility experience, and/or any additional certifications, such as certification by the National Institute for Automotive Service Excellence (ASE). An unrestricted driver's license and a cle

Salinas, CA 93901 • (14.4 miles) • Full Time • 9/9/2026

The Assistant Production Supervisor is responsible for assisting in shift start-up, fulfillment of customer demands, and coordination of people and materials. This individual will assist in the supervision of the production of finished goods in keeping with the standards established regarding quality of product, safety of operations, yield, line efficiency, and productivity. The Individual should be familiar with Ilapak Baggers, Hayssen Baggers Bosch, Baggers and Ishide scales or similar.Duties and Responsibilities: Participates in set-up, sanitation, operation, and routine maintenance of packaging lines and supporting equipment/systems. Responsible for trouble shooting packaging equipment problemsEnsures that lines are supplied with all necessary componentsKeeps inventory on packaging com

Santa Cruz, CA 95062 • (27 miles) • Full Time • 9/8/2026

POSITION: Production Operator - Santa Cruz HQCLASSIFICATION: Non-Exempt,Part - TimeREPORTS TO: Production ManagerWho We are:At Verve Coffee Roasters, we believe the coffee experience is our responsibility from seed to cup. Coffee is our craft, our ritual, our passion. It drives us and inspires us. With this simple truth and responsibility we are bridging the gap from farmlevel to streetlevel.Position SummaryWant to be an integral part of the day-to-day performance of Verve Operations? As a production operator, you’ll work as part of a team of energetic task-busters to make sure our coffee and merchandise are packaged and distributed to the many Verve Coffee drinkers out there. This is an entry-level position in the operations department at our HQ. Work alongside a team of awesome roasters,

Gilroy, CA • (32.9 miles) • Full Time • 9/7/2026

Company Description It started with a simple idea: what if surgery could be less invasive and recovery less painful? Nearly 30 years later, that question still fuels everything we do at Intuitive. As a global leader in robotic-assisted surgery and minimally invasive care, our technologieslike the da Vinci surgical system and Ionhave transformed how care is delivered for millions of patients worldwide.We’re a team of engineers, clinicians, and innovators united by one purpose: to make surgery smarter, safer, and more human. Every day, our work helps care teams perform with greater precision and patients recover faster, improving outcomes around the world.The problems we solve demand creativity, rigor, and collaboration. The work is challenging, but deeply meaningfulbecause every improvement

Morgan Hill, CA • (39.6 miles) • Full Time • 9/5/2026

Title: CMM Programmer/Quality InspectPosition Type: Full-Time/RegularDivision: NxEdgeDepartment:QualityLocation: NxEdge - Morgan HillJob Summary & Job DutiesSalary Range - $40.00 - $45.00 DOE Must have the personality and temperament to work as part of a team. • Use PC-DMIS software to create CMM programs for complex three-dimensional parts for consistent, accurate and efficient inspection. • Collaborate with other programmers, Machinists and Engineering team on manufacturing process development. • Work closely with Quality Control Inspectors on proving out new programs to the extent of having a robust, reliable and repeatable process. • Create and update detailed work instructions which could include text, sketches, and photographs. • Trouble shoot, up rev, improve and streamline existing

Morgan Hill, CA • (39.6 miles) • Full Time • 9/5/2026

Mechanical Piping EstimatorParagon MechanicalFull-Time | Morgan Hill, CADivision: PipingCompensation & BenefitsCompetitive base salary, depending on experienceComprehensive benefits packageFull-time, stable opportunity with a well-established mechanical contractorOpportunity to support commercial and industrial piping projects across the Bay AreaCollaborative role working closely with senior leadership, project managers, vendors, and clientsLocation / Work SetupThis role is based out of Paragon Mechanical’s Morgan Hill office.The Piping Estimator will work closely with the estimating, project management, purchasing, and operations teams. Some local travel may be required for job walks, bid reviews, client meetings, or project coordination.Job SummaryParagon Mechanical is hiring a Piping Es

San Jose, CA 95119 • (44.2 miles) • Full Time • 9/4/2026

OverviewWith over 150 years of experience,CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class servicesincludesHVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting.CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, servingmore than 45,000 customer locations across North America daily.WHAT WE OFFER Weare a large company serving many unique customers– because of this, we providejob stability and long-term opportunities for career growth. We invest in our technicians by offering:Competi

Carmel, CA 93923 • (13.8 miles) • Full Time • 9/4/2026

Join our outstanding Engineering Team at The Quail as a Maintenance Engineer, where you will support property upkeep, preventative maintenance, and safe, efficient facility operations.Enjoy the opportunity to work at a highly prestigious hotel in beautiful Carmel Valley, California.Advance your career and develop your skills within a dynamic and supportive hospitality environment.Receive exceptional medical benefits, along with exclusive employee discounts on lodging, golf, and dining services.Key AccountabilitiesInspects and identifies equipment or machines in need of serviceTroubleshoots issues to determine necessary repairsPerforms general repairs that do not require specialized technician. Example may include fixing drywall, painting,and perform basic carpentry.Answer maintenance reque

Salinas, CA 93907 • (16.8 miles) • Full Time • 9/4/2026

Automotive Technician – Under New ManagementMy Jeep Chrysler DodgeWe’re under new management and rebuilding our shop for better flow, better support, and better earning potential.If you’re tired of slow dispatch, weak leadership, or inconsistent hoursthis is your reset.The Line Technician is responsible for performing vehicle maintenance, diagnosis and repairs assigned in accordance with dealer and factory standards.DUTIES AND RESPONSBILITIES:Line Technician:Receive repair orders from dispatcher and take them to stall area.Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards.Have necessary tools to complete the job.Perform service and maintenance related workAccurately perform vehicle diagnosis and repairPerform squeak

Gilroy, CA • (32.9 miles) • Full Time • 9/4/2026

Full Steam Staffing is hiring in Gilroy, CA Title: Toaster OperatorLocation: Gilroy, CAPay Rate: $26per hourSchedule: Monday - Friday, Any shiftThe Powder Toaster Operator is responsible for operating the Powder Toaster production line to process onion and garlic powder according to customer specifications and quality standards. This role ensures efficient production while maintaining food safety, product quality, and workplace safety.Essential Responsibilities Operate the Powder Toaster production line safely and efficiently.Process onion and garlic powder to achieve required color, moisture, and customer specifications.Adjust product feed rates to optimize throughput, product quality, and moisture levels.Use a handheld scanner to track production and inventory.Complete all required HACCP

Morgan Hill, CA 95037 • (38.9 miles) • Full Time • 9/4/2026

Sr Materials PlannerOnsite – Morgan Hill, CA 95037 Full-Time | Exempt Salary Range: $100K-118K Annual Salary DOEMake an Impact at Tecan As a Materials Planner, you will be an integral part of our customer-facing Supply Chain team, ensuring the materials needed for production are available when required. You will manage self-directed planning activities, resolve material shortages and gaps, expedite materials when necessary, and occasionally execute purchase orders to close supply gaps.In this customer-focused role, strong communication and relationship-building skills will be critical to your success. You will use material analytics to confirm availability, identify risks, and proactively support on-time production. Your ability to analyze data, make sound decisions, and collaborate with i

Morgan Hill, CA • (39.6 miles) • Full Time • 9/4/2026

The Ford Store Morgan Hill is one of the Bay area’s best, family owned and operated Ford dealerships. Our facility is modern and state of the art.We are currently seeking:Diesel TechniciansLight line TechniciansHeavy Duty TechniciansDriveability TechniciansFront End/Alignment TechnicianMorgan Hill is a reverse commute from the Bay area.We offer competitive compensation and a benefits package which includes medical, dental, life insurance & 401K.Other benefits include discounts on purchases of new Ford Vehicles, AT&T Products & Dell Computer products etc.The Ford Store Morgan Hill is a Drug Free & Equal Opportunity Employer.The Technician Position has a Pay Scale consisting of the following elements and ranges. Wages include Base Hourly Compensation of between $32.00 and $58.00. The positio

Los Gatos, CA • (44.3 miles) • Full Time • 9/4/2026

Join CineLux Theatres to get your start in the movie business!If you have a passion for movies, we are now casting for the Los Gatos Theatre Manager!We are looking for an enthusiastic Theatre Manager to lead operations at the beloved, two-screen Los Gatos Theatre in downtown Los Gatos. As the Theatre Manager, you will play a key role in delivering an exceptional cinema experience, fostering a welcoming atmosphere, and driving community engagement. Responsibilities include overseeing staff, ensuring smooth daily operations, managing events, and maintaining the quality standards that make the Los Gatos Theatre a treasured destination for film lovers. This is an exciting opportunity to manage a historic venue and be part of a vibrant community.As the Los Gatos Theatre Manager, you will receiv

Monterey, CA 93940 • (9.8 miles) • Full Time • 9/3/2026

Title: Manufacturing ManagerDepartment: OperationsReports To: Director of OperationsFLSA Category: ExemptPay: $160,000 - $200,000Come Join Our Team: We take pride in building quality productsand enriching the lives of those who make it possible. As a growing company, we invest in our people, our processes, and the technology that drives our success. We believe that when our team members thrive, our company thrives. We offer opportunities for career growth in a supportive, hands-on environment where your contributions make a difference every day. Most importantly, you’ll be part of a positive, team-oriented culture where autonomy is earned, hard work is rewarded, and every employee’s voice matters. Come grow with us and help shape our future!Who We Are: Sierra Instruments, a TASI Measuremen