Longmont, CO 80502 • (44.1 miles) • Full Time • 10/18/2026

Job Description Summary As the Senior Excitation Engineer, you will serve as the global technical authority for excitation control systems across the GE Vernova and legacy nuclear fleet. You will lead the technical strategy for modernization, reliability, and regulatory compliance of excitation systems (EX2000, EX2100, EX2100e) in high-stakes nuclear environments. Requires ability to provide technical guidance and troubleshooting support for installation and commissioning led by field services team. In this Senior Professional band role, you will bridge the gap between advanced power electronics and stringent nuclear safety standards, acting as the final technical escalation point for the world’s most critical baseload power assets. Impacts approaches, projects and programs in the fu

Johnstown, CO 80534 • (14.5 miles) • Full Time • $38.50 to $50.00 / hr • 10/25/2026

Nuclear Medicine / Cardiac CT Technologist | Four-Day Workweek. No Weekends. No Call. Full-time | $38.50–$50.00 per hour, depending on experience and education What would your next role look like if you could keep doing the cardiac imaging you enjoy and have more time for life outside of work? This opportunity combines advanced nuclear medicine and cardiac CT with four 10-hour shifts, three days off each week, and no weekends, on-call responsibilities, or holidays. You’ll join an established team where almost everyone has been there for more than 20 years. Openings on this team are uncommon. With some longtime nuclear medicine professionals preparing to retire, there’s an opportunity for a new technologist to become part of its next chapter. What’s in It for You Fou

Boulder, CO 80301 • (39.6 miles) • Full Time • $36.00 / hr • 10/21/2026

Pay: $36/HR The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit The Building Engineer performs scheduled maintenance, safety inspections and repairs to varying types of equipment ABM will accept applications until 10/24/2026. Follows safe practices and complies with company and regulatory standards Qualified to operate or assist in operating all heating and ventilating equipment, engines, turbines, motors, combustion engines, pumps, air compressors, ice and refrigerating machines, air conditioning units, fans and siphon

Fort Collins, CO 80526 • (24 miles) • Full Time • 10/18/2026

Description We are seeking a Transmission Line Engineer who will work as a member of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as an Engineer on electric transmission line design projects for extra high-voltage (EHV) overhead and underground systems for some of the largest utilities in the country. This employee will apply NESC, ASCE, ACI and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, he/she will perform engineering analyses, prepare bidding documents, draft plans and specifications, and prepare material procureme

Loveland, CO • (20.3 miles) • Full Time • 10/25/2026

Heavy Civil Project Engineer Underground Utilities Location: North Denver, CO & Nationwide projects | Travel required Base salary: $85,000–$100,000 annually, based on experience We are recruiting a Project Engineer for a heavy civil contractor specializing in underground utilities, water, and sewer construction. The company works nationwide on projects that typically last one to three years . You’ll work alongside project managers and field leaders to keep projects organized, on schedule, and moving safely. The role includes time at both project sites and the corporate office. Expect to travel approximately three out of four weeks each month , including overnight stays. The company covers business travel, lodging, and per diem. What you’ll do Support underground utility, water, and sewer p

Fort Collins, CO 80524 • (23 miles) • Full Time • 10/25/2026

Description: Job/Position Summary Generally, the CNC Machinist V-Programmer II creates, updates, adjusts, and verifies complex programs; operates numerically controlled machine tools to perform a series of progressive machining operations on work to close and exacting tolerances and finish specifications requiring the highest level of skill in accordance with required specifications while maintaining quality and safety standards. Creates programming instructions, operational data, and machine setup instructions defining and coding tool arrangements, material clamping methods, machine calibrations, and console settings for operations such as bore, mill, drill, face, thread, profiling, and contouring. Ensures proper dimensions and tolerance levels of product by monitoring malfunctions and ou

Longmont, CO 80503 • (33.7 miles) • Full Time • 10/25/2026

About SparkFun Since 2003, SparkFun has been helping turn ideas into reality – whether you’re creating a smart weather station, exploring the frontier of machine learning, building a robot for school or prototyping your first (or tenth) product. No matter your vision or skill level, our open source components, resources and online tutorials are designed to broaden access to innovative technology and make the road to a finished project shorter. We are an equal opportunity employer that values a diverse workforce and an inclusive culture. SparkFun offers an abundance of opportunities to learn new skills from other Funions, in addition to many other benefits and perks. About the Engineering Department SparkFun's Engineering Department is responsible for the elaboration, design and development

Boulder, CO • (41.8 miles) • Full Time • $200,000 to $250,000 / yr • 10/25/2026

Senior Staff Graph Retrieval Engineer About the Opportunity Join an elite, venture-backed team building next-generation, AI-powered collaboration tools for the enterprise. Technical Integrity has been retained to lead the search for a rapidly growing startup developing AI systems that improve how large organizations think, communicate, and make decisions. Their product uses cutting-edge AI to identify and resolve coordination gaps automatically helping teams operate more intelligently and efficiently at scale. Following a recent and substantial round of funding, the company is expanding its world-class engineering team in Colorado and beyond. We're hiring a senior staff engineer specializing in knowledge graph retrieval to solve a critical scaling challenge: our AI agents build massive Eng

Longmont, CO 80501 • (29.4 miles) • Full Time • $99,440 to $131,357 / yr • 10/24/2026

At ASI, we are revolutionizing industries with state-of-the-art autonomous robotics solutions. Within the fields of agriculture, construction, landscaping, and logistics, we deliver technologies that enhance safety, productivity, and efficiency. With our core values of Simplicity, Safety, Transparency, Humility, Attention to Detail and Growth guiding everything we do, we're shaping the future of automation in dynamic markets. ASI's influence is felt globally, with our robotic automation products integrated into the operations of renowned companies and government agencies. Our prestigious clientele includes industry giants that are household names. By joining ASI, you become an integral part of a team that is revolutionizing how the world moves, operates, and automates. The Role You'll be w

Longmont, CO 80501 • (29.4 miles) • Full Time • 10/24/2026

Fotokite develops autonomous, high-endurance tethered unmanned aerial systems to help firefighters and public safety teams save lives. Fotokite systems allow first responders to quickly and easily gain situational awareness after arriving at emergency scenes: our autonomous one-touch launch/land system makes operation simple and safe; the dual color and thermal camera payload provides situational awareness from the system’s aerial perspective; and actively tethered flight means the system can be flown without a certified pilot, and can be left flying for as long as the situation requires. Role Overview We are seeking a high-energy, technically adept Sales Engineer to join our US team in Boulder, CO as an integral member of the Sales Team, reporting directly to Sales Leadership. In this rol

Boulder, CO 80301 • (38.7 miles) • Full Time • 10/24/2026

Company Description Are you looking for a unique opportunity to be a part of something great? Want to join a 20,000-member team that works on the technology that powers the world around us? Looking for an atmosphere of trust, empowerment, respect, diversity, and communication? How about an opportunity to own a piece of a multi-billion dollar (with a B!) global organization? We offer all that and more at Microchip Technology, Inc. People come to work at Microchip because we help design the technology that runs the world. They stay because our culture supports their growth and stability. They are challenged and driven by an incredible array of products and solutions with unlimited career potential. Microchip’s nationally-recognized Leadership Passage Programs support career growth where we p

Commerce City, CO 80022 • (40.3 miles) • Full Time • 10/24/2026

Data Center Engineering Design Director - Denver, CO This opportunity is working directly with a leading mission-critical data center developer / wholesale provider. This company provides turnkey data center solutions for High Performance Computing (HPC) to custom-fit to the requirements of their client's ever-changing mission-critical facilities operational needs. They accomplish this by providing reliability of mission-critical facilities for many of the world's largest organizations (Hyperscale and Enterprise Customers). This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are seeking an experienced Director of Data Center Engineering Design who will lead the development

Louisville, CO • (40.8 miles) • Full Time • $100,000 to $150,000 / yr • 10/24/2026

Job Summary :We are looking for a hands-on Electronics Manufacturing Engineer to own the electronics production process from prototype through high-volume manufacturing. You will bridge design and production by supporting PCB design,buildingandmaintainingtest infrastructure, understanding device firmware, troubleshooting issues on the line, and serving as the primary technical liaison with our contract manufacturers. This role is critical for ensuring high yield, quality, and scalability while driving root-cause analysis and corrective actions on any production failures.You will collaborate closely with R&D, operations, and manufacturing teams to release new products,optimizethroughput, and integrate systems with our core business platforms. Company Overview :Metron is a leading provider o

Broomfield, CO 80021 • (44.5 miles) • Full Time • $136,900 to $146,900 / yr • 10/24/2026

Job Title: Staff Network Engineer Department: Operations Engineering Reports To: Senior Manager, Operations Revision Date: 09/24/2026 FLSA: Exempt Location: Broomfield, CO preferred Level: T4 Rate of Pay: $136,900 - $146,900 Company Overview: At Comtech Telecommunications Corp, in the Allerium business segment, every connection counts. With roughly 700 employees, we design, deploy, and operate the mission-critical communications infrastructure that public safety agencies and emergency responders depend on every minute of every day. Comtech Allerium is powering Next Generation 911 and carrier emergency services across North America. We are helping shape the future of emergency communications making it more resilient, scalable, intelligent, and accessible. If you're looking for work that com

Fort Collins, CO 80525 • (20 miles) • Full Time • 10/24/2026

WHY ULLIMAN SCHUTTE? We are Building a Better Environment! At our core, Ulliman Schutte is a group of extraordinary individuals. We recognize that our continued success is a direct result of the expertise, enthusiasm, and commitment of our employees. In addition to long-term stability Ulliman Schutte provides a comprehensive compensation plan and a generous benefits package. We're looking for passionate Project Engineers in the Fort Collins, CO region who are eager to learn, grow, and contribute to building something meaningful! QUALIFICATIONS BS in Civil, Mechanical, Environmental, Construction Engineering, Construction Management or related field from an accredited university in the United States. Experience working successfully on teams. Excellent verbal and written communication skills

Longmont, CO 80503 • (33.7 miles) • Full Time • $25.00 / hr • 10/24/2026

Who We Are Stored Energy Systems (SENS) is an award-winning manufacturer of premium quality power conversion products located in Longmont, CO. In business for over 50 years, SENS is the market leader with a proven track record of providing highly reliable battery chargers, DC power systems, and related products to industrial markets. For more information on our company please see our web site at www.sens-usa.com. View the SENS Product Catalog Summary SENS is seeking a Software Engineering Intern to develop automated tests in C# for SENS hardware. You will work alongside experienced engineers to verify product functionality, expand repeatable test coverage, and help identify hardware and firmware issues in our battery chargers, DC power systems, and related products. Responsibilities Write,

Boulder, CO 80301 • (38.7 miles) • Full Time • $70,000 to $75,000 / yr • 10/24/2026

Overview BI is one of the leading technology companies in Boulder, Colorado and the largest provider of innovative electronic monitoring solutions in the United States. We excel at proving technological solutions to over 1,000 agencies nationwide and allowing those agencies to fulfill their missions without worrying about the technical complexities. Responsibilities Summary: The Manufacturing Systems Engineer is responsible for utilizing, modifying, improving, and further developing the multiple manufacturing systems that are needed in the daily production and servicing of BI products. Primary Duties and Responsibilities: Serves as systems engineer for manufacturing process and operations. Execute on manufacturing system modifications as directed by the Lead Process Enginee Identify areas

Boulder, CO • (41.8 miles) • Full Time • $130,000 to $150,000 / yr • 10/24/2026

Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facilityinside and outand can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. The Senior Design Engineer (Mechanical) helps clients identify, design, and implement utility and infrast

Boulder, CO • (41.8 miles) • Full Time • $150,000 to $180,000 / yr • 10/24/2026

At Atom Computing, we build quantum computers using arrays of optically trapped neutral atoms that will empower customers to achieve unprecedented computational breakthroughs. Join a world-class team of scientists, engineers, and business professionals to advance the state-of-the-art in quantum computing. Atom Computing is seeking an Senior Optical Engineer to lead the design of opto-mechanical subsystems and to drive their build out and develop fixtures and processes for their precision alignment and assembly. This position reports to the Optical Engineering Manager and requires on-site work at our Boulder, CO facility five days per week. Job Responsibilities Lead cross-functional partnerships with mechanical engineers and physicists to iteratively design optical subsystems in the areas o

Westminster, CO • (43.6 miles) • Full Time • $113,000 to $136,000 / yr • 10/24/2026

Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro , we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate,

Broomfield, CO 80021 • (44.5 miles) • Full Time • 10/24/2026

Job: Design Mechanical Engineer - Life Sciences Location: Broomfield, CO Build Your Future with GBA GBA, a full-service architectural and engineering firm, is seeking a Design Mechanical Engineer to join our Life Sciences group. We specialize in biopharmaceutical facility design and deliver integrated solutions for leading industry clients. This role offers the opportunity to work on complex, high-impact projects from concept through completion in a collaborative, growth-oriented environment. As a Design Mechanical Engineer, you will apply your building systems design experience and developing knowledge of regulated facility requirements to produce high-quality mechanical engineering deliverables. You'll work within multidisciplinary project teams, coordinate across disciplines, contribute

Fort Collins, CO 80525 • (20 miles) • Full Time • 10/24/2026

Are we the road to your future? We are currently searching for an experienced Construction Project Engineer to support our West Regionlocated in Denver, Fort Collins, and Colorado Springs, CO . To be considered for this position, applicants must have, at minimum, ten years of heavy highway construction experience and experience on Colorado Department of Transportation (CDOT) construction projects. What you’ll be doing: Oversee construction on heavy highway construction projects, with daily on-site presence Serve as the Engineer in Responsible Charge on assigned projects and administer all project paperwork Support project assignments located throughout the Colorado front range, including temporary relocation when necessary Report directly to the Resident Engineer or Client, as well as to t

Longmont, CO 80503 • (33.7 miles) • Full Time • $120,000 to $202,500 / yr • 10/24/2026

Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Located along Colorado’s scenic Front Range and nestled in the foothills of the Rocky Mountains, Longmont offers a high quality of life, breathtaking natural beauty, and easy access to outdoor recreation, making it the perfect place to balance work and play. This role is an on-site pos

Denver, CO 80233 • (40.1 miles) • Full Time • 10/24/2026

Position Summary The Lead Electrical Engineer is responsible for the end-to-end design, development, and technical leadership of electrical systems for power generation projects, including combined cycle, simple cycle, and battery energy storage systems (BESS). This role leads electrical engineering activities across the full project lifecyclefrom conceptual design through commissioning and performance validationensuring safe, reliable, and high-quality system delivery. The position requires deep expertise in power plant electrical systems, grid interconnection, and energy storage integration, with a strong focus on execution, code compliance, and constructability. Key Responsibilities Electrical System Design & Technical Leadership Lead the design and engineering of electrical systems, in

Broomfield, CO 80021 • (44.5 miles) • Full Time • $22.00 to $26.00 / hr • 10/24/2026

Job Posting TitleDrafter Job Description Title of position : Drafter Position type: Full Time Pay range : $22-$26 (Hourly)* Location : Westminster, Colorado About Kahuna At Kahuna, we offer a fast-paced, collaborative, and rewarding work environment rooted in our core values: Integrity, Relationships, Innovation, Safety, and Empowerment . We are committed to creating a workplace that employees are proud to be part of and one they can build a long and fulfilling career with. About the Role Perform basic redline drafting of Piping & Instrumentation Diagrams (P&IDs), Process Flow Diagrams (PFDs), and Block Flow Diagrams (BFDs). Supervision with specific and detailed instructions from the supervisor for day-to-day projects. This position reports directly to the Drafting Team Manager. What You’

Longmont, CO 80503 • (33.7 miles) • Full Time • $85,000 to $115,000 / yr • 10/24/2026

AtAret,weareontheforefrontofdevelopinginnovativesolutions,withgreatmindsfromallbackgrounds,tohelp solve the nation’s most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee- owned company, we foster an atmosphere that propels diverse career opportunities and professional growth. Discover your future with us. We are seeking a highly skilled Production Support Engineer to design manufacturing processes, procedures, and production layouts for assemblies, equipment installation, processing, and material handling. Develop sequences of operations for assemblies and specified procedures for the fabrication of tools, equipment, and other functions that impact product perf

Broomfield, CO 80023 • (36.8 miles) • Full Time • $86,000 to $116,000 / yr • 10/24/2026

Job Title: R+D Engineer Job Description: This is NOT an entry level position. The R+D Engineer is responsible for developing innovative solutions, improving existing products, and supporting the company’s technology roadmap. This role requires a self-motivated problem-solver who thrives in a fast-paced environment and can work independently with minimal supervision while collaborating effectively with cross-functional teams when needed. Job Duties: Design, prototype, and test new products, systems, or components from concept through production readiness. Conduct research to identify emerging technologies, materials, and processes that enhance product performance or reduce cost. Tap into market research to understand industry needs, market gaps. Plan and execute experiments, document result

Boulder, CO 80301 • (38.7 miles) • Full Time • 10/24/2026

SciTec, a Firefly Aerospace Company, is a dynamic non-traditional defense contractor that delivers advanced technologies in support of U.S. National Security and Defense. For over forty-five years, we have supported Department of Defense customers by developing innovative remote sensing algorithms, tools, and techniques to deliver world-class data exploitation capabilities supporting missile defense; intelligence, surveillance, & reconnaissance; space domain awareness; and aircraft survivability missions. Important Notice : SciTec exclusively works on U.S. government contracts that require U.S. citizenship for all employees. SciTec cannot sponsor or assume sponsorship of employee work visas of any type. Further, U.S. citizenship is a requirement to obtain and keep a security clearance. App

Boulder, CO 11111 • (41.8 miles) • Full Time • 10/24/2026

MMRConsultingisanengineeringandconsultingfirmspecializinginthepharmaceuticalandbiotechnologyindustries.ItsservicesincludeEngineering,ProjectManagement,andValidation. MMRConsultinghasofficesinCanada,USA,andAustralia. Thisisanoutstandingopportunitytojoinourgrowingteam,wherethesuccessfulcandidatewillworkwithagroupofengineersinvolvedinthedesign,commissioning&qualification,start - upandprojectmanagementofvariousprocesses,systems,andfacilities. Thisroleisfor Jr.CQVEngineer willrequiretoworkonthevalidationofupstreamanddownstreambioprocesssystems/equipmentinthebiopharmaceuticalindustry,aswellasprocessequipmentinpharma/biotechindustries.Theidealcandidateshouldpossessleadershipskillstoleadteamsofintermediate&juniorengineers. Theworkwillrequireworkingoutofclient’sfacilities,whicharetypicallyin theGre

Boulder, CO • (41.8 miles) • Full Time • 10/24/2026

The Director or Interconnection is responsible for leading Scout's interconnection function and advancing the company's interconnection strategy across a growing portfolio of utility-scale wind, solar, and energy storage projects throughout the United States and Canada. This role serves as Scout's subject matter leader for generator interconnection, transmission service strategy, grid integration, and interconnection engineering activities from project origination through commercial operation. Working closely with cross-functional partners, the Director will provide strategic recommendations, technical leadership, and portfolio oversight to support informed project development and investment decisions. The Director is responsible for building and leading a high-performing team, establishin

Louisville, CO 80027 • (42.5 miles) • Full Time • $150,000 to $200,000 / yr • 10/24/2026

Who We’re Looking For We are seeking an accomplished, motivated, and versatile Subject Matter Expert (SME) in NDT-E to join our team. This is a pivotal, high-impact position supporting a multidisciplinary group of engineers, analysts, and technicians who perform nondestructive testing and evaluation (NDT-E) on critical infrastructurebridges, dams, pavements, and other civil structures. The ideal candidate is a highly experienced engineer with deep expertise in NDT-E methods, especially related to structural systems, corrosion-resistant coatings, and thermal barrier technologies. You will play a key role in defining technical strategy, ensuring quality and performance, mentoring field staff, and supporting business development and growth initiatives. What You’ll Do Lead the development of t

Westminster, CO • (43.6 miles) • Full Time • $115,000 to $150,000 / yr • 10/24/2026

Conception to Reality Inc currently seeking a Senior Field Engineer to join our team. Who we are: Conception to Reality, Inc. (CtR) offers project management, engineering, and construction management expertise to large-scale food and beverage packaging and process manufacturers. Established as the premier manufacturing engineering company since 1994, CtR has an impressive record of driving success to our clients. The success is apparent in the cost savings, the increased production capacities, and the increased line efficiencies for the customers we have served. Our projects have spanned thousands of job sites since inception, across world-class packaging operations throughout North America. We hold each other accountable and work together to problem solve. We roll up our sleeves, get dirt

Commerce City, CO • (40.9 miles) • Full Time • 10/23/2026

Position Overview We are seeking an experienced Quality Inspector / CMM Programmer to take ownership of advanced inspection processes and support our AS9100 quality system. This role is ideal for someone who can program and run CMM inspections independently , analyze data, and ensure compliance with complex engineering requirements. Key Responsibilities Program and operate Zeiss Contura G2 CMM using Calypso Perform Formal Inspections, First Article Inspections (FAIRs) and complex layouts as well as program CMMs for inspection Conduct receiving, in-process, and final inspections Interpret blueprints and GD&T (ASME Y14.5) Create and optimize CMM programs and inspection methods Analyze inspection data and identify trends or issues Document results in Excel , High QA inspection documents and E

Westminster, CO 80031 • (43.6 miles) • Full Time • 10/23/2026

JOB DESCRIPTION: The hotel Engineer has the responsibility of working with the Chief to preserve the building?s overall operational condition and functionality. This role requires a thorough professional with a practical approach and attention to detail that can work both autonomously and responsibly, while maintaining the building and common areas in the best possible condition and observing all health and safety guidelines. JOB RESPONSIBILITIES: Report directly to Chief Engineer/Maintenance Supervisor Survey building and repair mechanical systems to ensure they are consistent with health and safety standards Perform maintenance of all electrical systems Maintain heating and plumbing systems to ensure functionality Perform manual repairs when necessary (repair/replace door locks, replace

Fort Collins, CO 80528 • (17.3 miles) • Full Time • 10/23/2026

Do you want: To be the in-house controls expert? To build tools that transform the production floor? To work where people truly come first? This could be the job for you! Production Engineer Pay Range: $70,000 to $120,000 DOE + Profit Sharing + Robust Benefits Location: Fort Collins, CO Position Type: Direct Hire Why consider this Production Engineer position: Ownership committed to taking care of people first. Respected, values driven manufacturer where you can feel proud of your work. Be the go to controls and automation expert for the plant. Blend engineering and software skills to make a visible impact. Freedom to experiment, build, and solve problems on the floor. Supportive culture where they “walk through life together, good and bad.” Profit sharing and anniversary bonuses that rewa

Fort Collins, CO 80525 • (20 miles) • Full Time • $32.00 to $42.00 / hr • 10/23/2026

Lexas Technologies US is a trusted partner of a leading supplier of wafer fabrication equipment and services to the global semiconductor industry. We deliver innovative solutions in Plasma Etch, Chemical Vapor Deposition (CVD), Plasma Enhanced Chemical Vapor Deposition (PECVD), and Wafer Wet Cleaning, supporting complex, high-tech multi-service projects worldwide. Position Overview We are seeking skilled Field Service Engineers to support our Fort Collins, Colorado site. This hands-on role focuses on the installation, servicing, repair, and maintenance of advanced semiconductor manufacturing equipment in cleanroom environments. This position will be based at our customers manufacturing site. We prefer candidates with direct semiconductor Etch experience; however, we welcome candidates with

Loveland, CO • (20.3 miles) • Full Time • 10/23/2026

Company Description Big challenges need bold thinkers. If you’re someone who sees problems as opportunities, you’ll thrive here. RESPEC is 100% employee-owned , which means we take ownership of every challenge. Here, your ideas drive real solutions. Since 1969, we’ve tackled complex challenges in energy transition, infrastructure resilience, digital transformation, and sustainability. At RESPEC, you’ll work alongside clients to take on critical problems . Depending on your expertise, you might design infrastructure in remote locations, develop renewable energy solutions for global projects, or apply data-driven technology to improve mining and water systems. We bring deep technical knowledge, real-world experience, and a commitment to work that matters. If you're looking for a place where

Fort Collins, CO • (21.6 miles) • Full Time • 10/23/2026

Felsburg Holt & Ullevig is looking to hire a full-time transportation design engineer in our Greenwood Village Office. mid-level engineer who wants a rewarding career in the transportation engineering field. The candidate for this engineering position will have the opportunity to work on a wide range of transportation-related design projects and will work for a variety of project managers. Primary duties for this mid-level engineer position, in our Mountain West Civil Group, are focused on transportation design and plan production for multimodal transportation corridor, roadway, highway/interchange, and multi-use trail projects for private, state, and municipal clients. Career emphasis will be focused on application of transportation modeling software for design projects, leading/managing

Louisville, CO • (40.8 miles) • Full Time • $150,000 to $200,000 / yr • 10/23/2026

Description As a Simulation Engineer , you will be responsible for developing and maintaining high-fidelity simulations of space vehicle dynamics, sensors, actuators, and propulsion systems, with the potential to expand into other subsystems. You will work closely with GNC, software, and test teams to ensure accurate modeling and analysis to support design, verification, and mission planning efforts for Mira, Helios, and more. Responsibilities Develop physics-based models of vehicle dynamics, reaction systems, propulsion systems, and other subsystems as needed. Integrate simulation framework into hardware-in-the-loop testbeds. Collaborate with engineers across disciplines to validate simulation models and behaviors against analysis and test data. Support system-level analysis, trade studie

Louisville, CO • (40.8 miles) • Full Time • $120,000 to $180,000 / yr • 10/23/2026

Description Stratom, Inc. is a mission-driven engineering company building autonomous and unmanned off-highway vehicles and related robotic systems. Our systems operate in demanding real-world environments, where performance, reliability, and engineering discipline are essential. Integrating advanced autonomy with rugged industrial hardware for austere conditions. Our work spans the full lifecycle of complex systems, from early concept and prototyping through fielded deployment. With multiple working prototypes in hand, our next major opportunity is transitioning these platforms into production over the coming years to deliver capable systems at scale. We are looking for talented and experienced engineers who want to take ownership of hard problems and play a key role in bringing multiple

Westminster, CO • (43.6 miles) • Full Time • $112,000 to $130,000 / yr • 10/23/2026

SUMMARY The Lead Quality Engineer provides technical leadership for quality assurance and quality control activities across ATG programs, projects, and manufacturing operations. The role translates customer, design, code, regulatory, and quality-system requirements into practical execution plans; supports timely resolution of quality issues; and ensures objective evidence is complete, accurate, traceable, and defensible. The Lead Quality Engineer serves as a working technical leader, develops team capability, and partners with Operations, Engineering, Supply Chain, Project Management, and Document Control to protect compliance while improving flow, utilization, and first-pass quality. ESSENTIAL DUTIES AND RESPONSIBILITIES Lead quality engineering activities for assigned programs, establish