Longmont, CO 80504 • (27.4 miles) • Full Time • 10/15/2026

Quality Engineer:Quality, On-time Delivery and Customer Satisfaction are of the upmost importance to MBK Machine. The duties of this job are to maintain & continuously improve these metrics where possible. The duties of the quality manager are to oversee quality operations, ensure excellent quality control of product and maintain and uphold the quality management system. Responsibilities of the position:Performing quality inspection, applying quality inspection techniques, and identifying nonconforming hardware.Measure parts using most applicable method and ensure other inspectors are up to date on best measurement practices.Perform first article inspections, in-process inspections, and final inspections.Perform quality planning along with creation of bubble prints and required QC document

Longmont, CO 80503 • (27.9 miles) • Full Time • 10/15/2026

Position OverviewThe Calibration Technician C will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician C will identify and utilize appropriate manual and automated measurement procedures.This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calib

Sedalia, CO 80135 • (34.3 miles) • Full Time • 10/15/2026

Our Mission:Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first.Job Purpose:Fabricate and refurbish wire rope slings and other lifting assemblies.Key Duties and Responsibilities:Fabricate and repair wire rope slings and assemblies; andAchieve qualification as an apprentice (minimum) or journeyman splicer.Driving company vehicles to complete pick-ups and deliveries as needed.Perform other functions as required.Job Requirements:Must have experience in manufacturing role working with various tools.Must be

Loveland, CO 80537 • (42.5 miles) • Full Time • 10/15/2026

About the Role:The Controls Engineer II plays a critical role in designing, developing, and optimizing control systems that enhance the efficiency and reliability of industrial processes. This position involves collaborating with cross-functional teams to implement automation solutions that meet operational requirements and safety standards. The engineer will be responsible for troubleshooting and resolving complex control system issues to minimize downtime and improve system performance. Additionally, the role requires continuous evaluation and integration of new technologies to advance control strategies and maintain competitive advantage. Ultimately, the Controls Engineer II ensures that control systems operate seamlessly to support the organization's production goals and quality standa

Englewood, CO • (10.4 miles) • Full Time • 10/15/2026

Solid Rock Recruiting- The #1 Glass and Glazing Recruiting Firm in the USA Production Engineer - Make Your Mark in Engineering Excellence!Our client, an industry-leading engineering firm, is seeking a talented Production Engineer to join their innovative team. This role offers an exciting opportunity to work with cutting-edge technology while contributing to meaningful projects that shape our built environment.About Our Client:Established engineering firm with a strong reputation for excellenceCulture that values integrity, innovation, and professional growthCompetitive compensation and comprehensive benefits packageCollaborative work environment focused on quality and precisionKey Responsibilities:Review and prepare engineering calculations and design documentsAnalyze technical specificat

Littleton, CO 80120 • (13.4 miles) • Full Time • 10/15/2026

About the Role: The CAD/BIM Operator is responsible for producing accurate, high-quality technical drawings and models in support of VDA’s Design Services department. This role supports project managers, engineers, and consultants by creating 2D sketches and layouts, and 3D models of vertical transportation equipment. The CAD/BIM Operator ensures drawings comply with internal standards and project requirements.Responsibilities: Create 2D drawings of vertical transportation elements (primarily elevators and escalators), utilizing AutoCAD software and VDA standards Drawings include plans, sections, elevations, and detailsCreate 3D models of vertical transportation systems, utilizing Revit softwareCoordinate BIM models with architectural firms and other tradesProduce plan and section sheets

Commerce City, CO • (15.2 miles) • Full Time • 10/15/2026

Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers.Responsibilities of theMachinistinclude, but ar

Englewood, CO 80112 • (19 miles) • Full Time • 10/15/2026

SummaryMicrosel of Colorado, LLC d/b/a/ TrinWare is a successful custom computer manufacturer based in Centennial, Colorado. We are looking for a Computer Configuration Technician to join our team. TrinWare provides custom computer systems to OEM’s, manufacturers, software solution providers, and vertical market companies that provide turn-key computer solutions. Sales to VAR’s, resellers, and corporations in the customized computing and solutions space is also a large part of our company business model. Hardware platforms range from multiprocessor servers to small form factor solutions running a variety of operating systems and applications.The Technical Production and Configuration Technician is responsible for the efficient, accurate, detailed, and timely configuration of computer syste

Longmont, CO 80501 • (27.1 miles) • Full Time • 10/15/2026

As a locally owned business, the Screamin Peach (TSP) is proud to stand apart from other factory-style waxing studios. Our comfortable environment, exceptionally talented team, and level of personalized service has gained both local and national recognition. Since 2006, we’ve made it our mission to help people from all walks of life feel good about themselves as we rid Northern Colorado of its unwanted hair. As a team, we believe in one-on-one relationships with open communication, support, kindness, and respect-- both for our valued clients and for each other. It’s about more than just hair...it’s about personalized care.We are looking to fill a full-time hands-on esthetician position. Must provide professional, safe, skilled, and friendly service to all clients. This position must adhere

Denver, CO 80201 • (5.4 miles) • Full Time • 10/15/2026

Summary Production Supervisor III Location:4301 Forest St, Denver, CO 80216 1st Shift 6am to 2:30pm 2nd Shift 2pm to10:30pm 3rd Shift 10pm to 6:30 am *** please note which shift your candidate is interested in. Days of the week are TBD as management is currently developing a schedule. Associates may be required to work weekends, potentially at least one day each weekend. Is there a possibility this assignment will be extended? Yes Is there a possibility this assignment will convert to full time employment? Yes Candidates will have a panel interview. Responsibilities Responsible for the coordination of various manufacturing and warehouse functions within a single large, complex and fast paced production facility to drive maximum financial results and deliver a quality on-time product for c

Broomfield, CO 80021 • (8.2 miles) • Full Time • 10/15/2026

Director, Milk Quality & CareAbout the Company:At Horizon Organic, we’re growing a culture of passionate people driven to do good for the horizon we all share. We’re building the tomorrow we want to see. Every single day.Joining our team means being part of a dynamic environment where your skills are valued, and your contributions make a real difference. We offer diverse opportunities for career growth and development. Embark on a rewarding journey with us in shaping the future of organic dairy!Two generations of familiesand countinghave grown up on Horizon Organic® milk. From the start, as the leading organic milk producer in the U.S., Horizon has been committed to delivering innovative, nourishing dairy that growing families can rely on. In 2023, Horizon Organic became a brand of Platinu

Denver, CO • (12.1 miles) • Full Time • 10/15/2026

Company Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company.We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us.Job DescriptionAs an Electrical Engineer on our Data Center team, you will be responsible for designing and coordinating electrical systems using Revit including the creation of Construction D

Golden, CO 80403 • (12.2 miles) • Full Time • 10/15/2026

Location:Golden, COGeneral Description:Responsible for performing production work on large stainless-steel assemblies. Starts, operates, tends, stops, and cleans machines. Assembles finished product. Inspects product to ensure high quality.Essential Functions:Uses tools like measuring tapes, angle finders, and material gauges to verify dimensions.Assembles different components by following written instructions and or drawings.Selects and kits fasteners and other materials needed for assembly.Drills and punches holes in metal, for screws, bolts, rivets, or finished parts.Sets in place metal sheets and bars, welds, grinds, cleans assemblies.Collaborates on any repairs necessary for damaged parts.Fabricates or alters parts using shears, hammers, punches, and drills.Separates, sorts, organizes

Louisville, CO 80027 • (12.7 miles) • Full Time • 10/15/2026

Senior Mechanical Engineer Department: EngineeringReports to: Director of EngineeringRegion: Superior, ColoradoSalary Range:$90-$135KTravel Requirement:Up to 5%Note: This position does not offer sponsorship. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire.POSITION SUMMARYAs a Senior Mechanical Engineer, you’ll turn market needs into practical, manufacturable products. You’ll lead mechanical design work from concept through testing and production, using design for manufacturing and assembly principles to create 3D CAD models, drawings, bills of materials, tools, fixtures, and test systems. Working closely with project managers and manu

Henderson, CO 80640 • (14.1 miles) • Full Time • 10/15/2026

SUMMARYUnder the general direction of the Operations Manager, the Maintenance Supervisor is responsible for overseeing the daily maintenance operations of the facility to ensure equipment reliability, production efficiency, and a safe working environment. This position supervises maintenance personnel, coordinates preventive and corrective maintenance activities, supports continuous improvement initiatives, and works closely with Operations, Engineering, and Plant Leadership to minimize downtime and maximize equipment performance.ESSENTIAL DUTIES AND RESPONSIBILITIESSupervises, coaches, and develops a team of maintenance employees, including assigning work, monitoring performance, and providing ongoing training and support.Coordinates and oversees daily maintenance activities to ensure tim

Denver, CO 80239 • (14.4 miles) • Full Time • 10/15/2026

Job Summary:The Production Technician I is an entry-level member of the Production Team responsible for supporting visual inspection, labeling, packaging, documentation, cleaning, and material-handling activities required to manufacture and release finished pharmaceutical products in a 503B outsourcing facility.This role primarily works in a controlled non-classified (CNC) environment and requires employees to follow detailed procedures, wear appropriate PPE, complete documentation accurately and contemporaneously, and maintain a high level of attention to detail. The Production Technician I supports patient safety by helping ensure that products are inspected, labeled, packaged, and handled according to cGMP, company procedures, and applicable regulatory requirements.What this role does d

Englewood, CO 80112 • (19 miles) • Full Time • 10/15/2026

The anticipated closing date of this job post is 11/2/2026.Job Summary:Design, integrate, or improve manufacturing systems or related processes.Principle accountabilities include:Develop technical expertise regarding products and business processes.Establish and perform maintenance on manufacturing bills of material.Develop SOPs/WIs and routings for general parts and specific projects.Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts.Develop and maintain routings to govern work flow.Develop precedence networks and assist with appropriate work scheduling and flow.Develop standard labor hours and manning

Boulder, CO • (19.1 miles) • Full Time • 10/15/2026

IESE Solutions is seeking Industrial Engineers to support the U.S. Space Forces (USSF) mission of delivering warfighter capability via the Space Systems Command (SSC) directorates.Position is available in Boulder, CO. This program is supporting Government weapon systems program offices with subject matter experts that have a background with the Space-based and/or Ground Systems including Command & Control services. Team members provide systems engineering development and integration expertise in support of various capabilities that protect and defend the Nation's most valuable space assets. Our team is at the forefront of advising and assisting the Government with their architecture and full lifecycle systems engineering processes that enable key systems (e.g., satellites and their associa

Longmont, CO 80501 • (27.1 miles) • Full Time • 10/15/2026

Vitesse Systems is looking for a Machinist IIto join the team in Longmont, Colorado! The Machinist II is responsible for programming and manufacturing our high precision antenna feeds.About Vitesse SystemsVitesse Systems is a leading provider of highly engineered antenna, thermal management and mission critical solutions used in radar, electronic warfare and C5ISR applications. No challenge is too difficult for the Vitesse Team. From complex specification driven requirements to precision manufactured components, Vitesse Systems has the experience and expertise needed to execute.Our Core ValuesOur core values of Integrity, Initiative, Impact, and Integration translate to an environment where every team member is valued and rewarded. The mission-critical solutions we design and manufacture a

Longmont, CO 80504 • (27.4 miles) • Full Time • 10/15/2026

Production & Sales Coordinator The Door Dudes (Longmont/Mead, CO)$22–28/hr + monthly bonus · Full time · W-2 · PTO + health stipendThe Door Dudes builds and installs premium custom entry doors Brazilian Mahogany,iron, steel and fiberglass plus windows, pergolas and remodels across NorthernColorado and the Denver metro. We're growing, and we need the person who keeps thewhole machine running.You'll be the first voice our customers hear and the reason our installs land on time.What you'll do:Answer every call and call back new web leads within 5 minutesBook, confirm and track in-home sales appointmentsFollow up on open estimates until we get a yes or noPlace door and material orders and track every order with our suppliersKeep customers updated on their order from deposit to install dayBuild

Sedalia, CO 80135 • (34.3 miles) • Full Time • 10/15/2026

About the RoleWe are seeking an experienced and hands-on Quality Control (QC) Inspector to oversee quality operations in the shop for our steel fabrication projects. This role ensures that fabricated components, welds, and assemblies meet all customer specifications, project drawings, and industry standards. You will work closely with the Shop Manager to identify issues, enforce quality requirements, and drive continuous improvement from fabrication through final installation.Responsibilities:Shop ResponsibilitiesOversee daily quality checks on fabricated parts and assemblies.Perform inspections on welds, layouts, dimensions, and finishes against shop drawings and specifications.Verify welding procedures (WPS), welder qualifications, and compliance with AWS, AISC, and customer standards.Co

Denver, CO 80235 • (8.8 miles) • Full Time • 10/14/2026

About UsEstablished in 1987, Chemistry & Industrial Hygiene, Inc. (C&IH) is a scientific consulting firm based in Denver, Colorado, serving clients nationwide. We specialize in human health risk assessment, toxicology, exposure modeling, and engineering controls across a wide range of industrial, manufacturing, commercial, and technology sectors. Our multidisciplinary team brings together expertise in industrial hygiene, exposure assessment, toxicology, and engineering to address both common and complex occupational health challenges.Position OverviewC&IH is seeking a mechanical engineer or similar related discipline with practical experience in ventilation systems and a strong interest in applying engineering principles, including modeling, to worker health and occupational exposure contr

Denver, CO • (12.1 miles) • Full Time • 10/14/2026

Xcimer Energy leverages decades of research on Inertial Fusion Energy (IFE) combined with groundbreaking new laser architecture. Our mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. Xcimer has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by leading investors, Xcimer is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. Join us in powering a better world with inertial fusion! This is a full-time, onsite role based at our headquarters in Denver, CO. As an Electrical Engineer Signal Distribution & Controls, you will apply your skills to own and deliver endtoend electrical system implementation, including low voltage power dis

Wheat Ridge, CO • (0 miles) • Full Time • 10/14/2026

OverviewRecognized by Clarivate, Forbes, the Human Rights Campaign, and Military Friendly® for innovation, workplace excellence, inclusion, and veteran support.A global building automation and industrial technology company with 100+ years of history, 25,000+ patents, and 7,000+ engineers, operating across 70+ countries and 4 major business areas. Its technologies support industries including buildings, manufacturing, healthcare, data centers, and utilities worldwide.Benefits401(k) match: Employer matches 87.5% of the first 8% of eligible pay, up to 7% of base salary; generally fully vested after 3 years.Education support: Up to $5,250/year for eligible undergraduate programs and $7,500/year for graduate programs.Paid parental leave: 8 weeks (40 business days) for birth, adoption, or foster

Denver, CO 80223 • (7.5 miles) • Full Time • 10/14/2026

Description:Assist in optimizing workforce productivity and work quality by eliminating potential delays and obstacles through proper planning and coordination of manpower, parts and materials. Perform all jobs safely, efficiently and accurately to maintain and improve the performance of the entire plant in the areas of Safety, Quality, Reliability (SQR) and our Customer 1st strategy. Provide leadership that embodies our 7 Kroger Manufacturing High Performance Work System principles. Demonstrate the company's core values of respect, honesty, integrity, diversity, inclusion and safety.Responsibilities:Using the computer tracking software and systems assist in planning and scheduling maintenance work, maintain appropriate records and files and report the results of completed work.Maintain a

Englewood, CO 80110 • (10.1 miles) • Full Time • 10/14/2026

Control Solutions, a Crete United Company is a full service HoneywellECI-Elite level Building Automation/Controls installation and service company. The Install group is responsible for the installation of the components, equipment, and devices of building automation projects within the Controls division or in support of other division within the company (Service, HVAC Install, etc). Working in the field and in front of customers/contractor, the Install group is often the face of the company with a great opportunity to represent the company in a professional manner. The Controls Foreman acts as a project lead for projects directly assigned. Controls Foreman will assist Project Managers in the successful installation and delivery of controls projects. Acting in a supervisory role, it is the

Denver, CO • (12.1 miles) • Full Time • 10/14/2026

DescriptionEquinox Engineering Ltd. is a Calgary-based EPCM firm and a market leader in oil and gas processing. We specialize in facilities design, project implementation, and operational support for natural gas, conventional oil, and heavy oil projects. In addition to our strong presence in the energy sector, Equinox is rapidly emerging as a leading EPCM provider for data centers across North America. With the growth of this booming sector, alongside our ongoing oil and gas projects, the demand for a Senior Electrical Engineer - Power Generation with a focus on Mission Critical power delivery has never been greater.Summary:Power generation is the largest and most critical component in data center design. With power requirements ranging from 100MW to 2,000MW, we are seeking Electrical Engi

Commerce City, CO • (15.2 miles) • Full Time • 10/14/2026

Job Summary:In this role, you will be actively involved in projects from the quoting phase through design, manufacturing, and sustaining. You will be responsible for designing systems intended to move, lift, flip, roll, turn, and store steel and other materials. This role requires involvement in the planning, quoting, scheduling, designing, procuring, and manufacturing of mechanical and electrical systems, and ensuring they meet quality standards and customer requirements. You will work closely with the in-house manufacturing team to ensure that designs are cost-effective, manufacturable, and well-documented.General Responsibilities:Meeting with clients and design teams to determine mechanical applications and requirements.Design equipment component parts with a focus on design for manufac

Englewood, CO 80112 • (19 miles) • Full Time • 10/14/2026

Description: Structural Integrity Associates, Inc. (SIA) is currently seeking an experienced Engineer to join our Balance of Plant (BOP) group. This group provides engineering and consulting services for most phases of above-ground piping, buried piping, and underground asset integrity programs. The successful candidate will be responsible for providing subject matter expertise related to Balance of Plant BOP Asset Life Cycle Management. The ideal candidate will possess a solid understanding of BWR and/or PWR systems, experience supporting utility-side Flow Accelerated Corrosion (FAC) or BOP program ownership, and the ability to translate degradation mechanisms into actionable engineering recommendations. Additionally, the ideal candidate will contribute as a Subject Matter Expert (SME) in

Aurora, CO 80011-9504 • (20.4 miles) • Full Time • 10/14/2026

US Citizenship is requiredAn active TS/SCI w/CI Polygraph is requiredOccasional CONUS and OCONUS travel may be requiredAnnual Base Pay: $150-180k with 25% company funded 401k based off base payDPG Solutions is seeking a qualified and experienced RF Systems / Hardware Engineer to support engineering analysis, baseline management, operations and maintenance, system enhancement, and integration activities for a complex, high-priority operational communications system.This role is best suited for an engineer with hands-on experience supporting RF ground systems, satellite communications systems, hardware sustainment, troubleshooting, requirements management, and operational system support. The selected candidate will help ensure the successful operation, maintenance, sustainment, and enhanceme

Denver, CO 80206 • (8.5 miles) • Full Time • 10/13/2026

Part-Time Harm Reduction CoordinatorHourly rate: $23 - $25 per hour depending on qualifications and experienceHourly non-exemptReports to:Director of Harm Reduction and Community HealthPosition Summary:The Harm Reduction Coordinator provides trauma-informed, participant-centered, and culturally responsive harm reduction services to individuals who may be at increased risk for HIV, hepatitis C (HCV), and sexually transmitted infections (STIs). The position has a particular focus on engaging people who use or inject drugs (PWUID), LGBTQIA+ communities, women, people experiencing homelessness, and others who may experience barriers to traditional healthcare services.The Harm Reduction Coordinator is responsible for creating a welcoming, gender-affirming, nonjudgmental environment while provid

Englewood, CO • (10.4 miles) • Full Time • 10/13/2026

Test & Inspect Technician Department: Test & Inspect Reports To: Service Manager / Inspection ManagerLocation:Englewood, Colorado Employment Type: Full-Time, Field-Based Position Summary The Test & Inspect Technician is responsible for performing scheduled inspections, testing, and maintenance on a variety of fire and life safety systems, including fire alarms, sprinkler systems, suppression systems, emergency lighting, and other life safety equipment. This role ensures that all systems comply with NFPA codes, manufacturer specifications, and local authority requirements, while delivering outstanding customer service and maintaining the highest safety standards. Key Responsibilities Inspection & Testing Perform inspections and functional testing on fire alarm, sprinkler, special hazard, fi

Broomfield, CO • (12.8 miles) • Full Time • 10/13/2026

Hunter Douglas is the world’s leading manufacturer of window coverings and a major manufacturer of architectural products. We are a brand that you know and trust. With more than 100 years of innovation, we’ve defined our industry with proprietary products that deliver revolutionary style and functionality and can be found in millions of homes and commercial buildings globally.We are searching for candidates that are driven, intelligent, creative, and entrepreneurial. By offering challenging and accelerated opportunities for growth, powered by a shared hunger for success, we create a space for your career to thrive. In return for your expertise, we are committed to providing competitive and robust total compensation and benefit packages to ensure you feel valued. Our dream is to become the

Henderson, CO 80640 • (14.1 miles) • Full Time • 10/13/2026

$23 We are looking for a GENERAL LABORER to join our HENDERSON, CO plant. As a general laborer with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications.You will work become part of a community that prioritizes not only our customers but also values our dedicated and loyal employeesWhy apply?Competitive payMedical and prescription drug coverageDental and vision coverageHealth savings and flexible spending account401(k) with company matchLife insurance and disability coveragePaid vacationPaid holidaysGrowth & Development opportunitiesEmployee DiscountsMental Health through our Employee Assistance ProgramWellness benefits including low-cos

Aurora, CO 80011 • (16.7 miles) • Full Time • 10/13/2026

The Production Technician safely operates, monitors, and maintains production equipment for daily processing operations within a Contract Manufacturing Operation. Duties include utility/water checks, media prep, building and inoculating vessels, sampling, recording process data, packaging finished product, COP cleaning, CIP/SIP line-outs, and basic troubleshooting. The role reports deviations and equipment concerns promptly, follows all SOPs, safety and quality standards, and company policies, and requires strong attention to detail and teamwork in a fast-paced environment. Essential Duties: Run all Upstream and Downstream processes, including media prep, vessel builds (Seeds 1–4), and packaging finished product. Operate Packaging, BMH, Fermentation, EVAP, Spray Dryer, UHT, Centrifuge, Ho

Erie, CO • (18.8 miles) • Full Time • 10/13/2026

About Chartered Development CorporationChartered Mechanical Company, LLC (“Chartered Mechanical”) is an affiliate of Chartered Companies dedicated to providing HVAC installation, service, preventative maintenance, commissioning, and other mechanical-related services in support of Chartered's multifamily residential communities. Chartered Mechanical supports new construction activities and continues to expand its capabilities to serve select third-party residential and commercial clients. Its mission is to improve project quality, operational efficiency, asset durability, and customer satisfaction through superior workmanship, organization, technical expertise, and long-term ownership. With active construction projects and operating communities throughout the Denver metropolitan area, inclu

Englewood, CO 80112 • (19 miles) • Full Time • 10/13/2026

Quality Systems Associate IDepartment: QualityLocation: Centennial, CO 80112Employment Type: Full-Time, PRNCompensation: $25-30 DOEJoin Our Team as a Quality Systems Associate at VPI Compounding Pharmacy! VPI Compounding Pharmacy is at the forefront of pharmaceutical excellence and is seeking a detail-oriented, ambitious Quality Systems Associate to join our Quality team. You’ll work across departments to support quality systems, compliance, and documentation, gaining hands-on experience in a role critical to patient safety and product quality. If you’re curious, detail-oriented, and ready to make an impact, this is your opportunity to grow with a company shaping the future of pharmaceutical care!Key ResponsibilitiesRegulatory ComplianceSupport adherence to USP , , , and FDA compounding re

Longmont, CO 80504 • (27.4 miles) • Full Time • 10/13/2026

Hirsh Precision: Where Advanced Manufacturing ThrivesJoin our journey from the Front Range, where we've been revolutionizing manufacturing since 1979. At Hirsh Precision, our passion for quality and cutting-edge technology drives us to innovate in the medical, aerospace, industrial, and scientific sectors.As part of our commitment to improving lives, we value integrity, quality, and service. We're looking for a dynamic individual ready to enhance our company culture while contributing to industry excellence.Core Values and MissionWe're on a mission to set the benchmark for precision manufacturing excellence, delivering world-class products and services with reliability and continuous improvement.Become part of a team that prioritizes honesty, productivity, loyalty, and dedication.Role Over

Arvada, CO • (4.8 miles) • Full Time • 10/13/2026

Today, everything we send to space is constrained by what fits inside a rocket fairing. That's a fundamental bottleneck to building more capable spacecraft. Rendezvous Robotics is solving this problem with electromagnetic self-assembling tiles: modular spacecraft components that rendezvous, dock, and latch to assemble bigger and more powerful spacecraft than anything that can be folded to fit into a rocket.We're a small team based in Golden, Colorado, executing on a clear path from flight demonstration to our first operational systems. Our work spans hardware, software, and systems engineering. We are looking for the best people in the world who want to build the next generation of advanced spacecraft.Responsibilities & OwnershipGenerate and maintain work instructions for mechanical and el

Denver, CO 80238 • (11.8 miles) • Full Time • 10/13/2026

Apply now: Print Production Specialist, Onsite - Denver, CO. Start date is ASAP for this 6-month contract position. Job Title: Print Production Specialist Location-Type: Onsite, Denver, CO Start Date: asap Duration: Contract, 6 months Compensation Range: $19-$25/hr W2 Benefits:Eligible for Health, Dental, Vision, 401K Must be authorized to work in the U.S. This position is not eligible for sponsorship. Benefits: Eligible for Health, Dental, Vision, and 401K Visa Sponsorship: Not eligible for visa sponsorship Job Description:This role supports a high-volume print production shop environment, preparing and processing print-ready files, operating production equipment, and ensuring quality output is packaged and staged for delivery to event venues. Job Summary•Download and prep print-ready fil

Denver, CO • (12.1 miles) • Full Time • 10/13/2026

Prime Robotics is a premier provider of end-to-end automation solutions tailoredfordistribution centers and warehouses. Prime’s suite of robot and execution software solutions transform fragmented workflows, empowering clients to unlock operational productivity and efficiency. Committed to revolutionizing warehouse, supply chain, and factory operations, Prime strives to elevate businesses through best-in-class automation solutions and services.If you want to build hardware and software that physically changes how warehousesoperateandsee your work rolling across a live warehouse floor,Prime Roboticsis the place to do it!Lead Electrical Engineer – Autonomous RobotsWe're looking for a Lead Electrical Engineer to own the electrical architecture and reliability of our autonomous mobile robots.