Please Accept our Privacy Policy
FM
West Glocester, RI 02814 • (44.2 miles) • Full Time • 11/16/2026
Job Description: is an international leader in third-party testing and certification services. We test property loss prevention products and services—for use in commercial and industrial facilities—to verify they meet rigorous loss prevention standards of quality, technical integrity and performance . How? By employing a worldwide certification process that’s backed by scientific research and testing, and over a century of experience. The FM APPROVED mark is recognized and respected worldwide. Our certification instills confidence and commands respect in your marketplace. Responsibilities : Perform assigned tests, investigations or experiments. This may require minor modifications in test setups or procedures as well as subjective judgments in measurement. Selects, sets uSaab
Worcester, MA 01601 • (39.7 miles) • Full Time • 11/1/2026
Job Description: Saab Inc.'s Autonomous and Undersea Systems (AUS) division is seeking an innovative and experienced Senior Software Engineer to participate on technical teams defining, architecting, implementing, integrating, verifying, delivering, and maintaining software products and solutions for autonomous Unmanned Surface/Underwater Vehicles (USVs/UUVs/AUVs) and Remotely Operated Vehicles (ROVs). As the successful candidate for this role, you will be a key contributor to the Saab AUS team, helping to expand our portfolio of products, technologies, and capabilities, and in the process gaining tremendous experience with unmanned maritime software and systems. You will be part of a world-class team recognized for its technical accomplishments and vision in maritime and defense sectors.
Clean Harbors
Bristol, CT 06011 • (15.7 miles) • Full Time • $26.00 / hr • 11/16/2026
Clean Harbors in Bristol, CT is seeking an Environmental Field Chemist (CleanPack Chemist CDL) to handle, segregate, pack, and inspect chemical waste in accordance with Federal/State/Local regulations and our company policies and procedures. This position will work both indoors and outdoors at plants, labs, customer sites and are responsible for assisting with lab packs within customer facilities, household hazardous waste (HHW) collections and lab moves. This is a customer facing position, working at customer sites daily . The Environmental Field Chemist are (NOT) laboratory-based Chemist. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean HarborsGoodwinRecruiting
Agawam, MA 01001 • (6.9 miles) • Full Time • 11/16/2026
An established Machinery Manufacturing firm is looking for a Field Service Engineer to join their Team! The Field Service Engineer is tasked with installing, maintaining, and troubleshooting CNC machines for an OEM environment. This role requires up to 75% travel within the local tri-state area, with opportunities for additional domestic travel. Job Responsibilities: Install, maintain, troubleshoot, and repair CNC machines (Citizen and Miyano equipment preferred) Replace components such as ball screws, motors, and cartridge spindles Utilize ladder logic and diagnostic functions across various control systems Provide phone-based technical support for troubleshooting, on a daily basis Align and adjust tooling Repair spindle bearings Align and interface bar feed units Perform first-part runofilocatum
Farmington, CT 06030 • (15.7 miles) • Full Time • $65,000 to $95,000 / yr • 11/16/2026
Engineering Change Specialist, ECN and BOM Management Location: Farmington, CT Job Type: Full-time Pay: $65,000 to $95,000 per year Own the engineering change process that keeps products, BOMs, and production aligned, working at the center of every cross-functional team. Must-Haves Strong knowledge of engineering drawings, bills of material (BOMs), and change control procedures Experience with ERP/MRP and PLM systems Strong mechanical aptitude and working knowledge of the metric system Understanding of manufacturing processes and inventory considerations Strong organizational, analytical, and communication skills Ability to manage several engineering changes at once What You'll Do Manage and improve the engineering change management process, including ECN workflows and procedures Validate,Johnson Controls
Rocky Hill, CT 06067 • (23 miles) • Full Time • 11/16/2026
What you will do Responsible for working independently with sales, and or client directly to develop, secure and manage new or expanded performance guarantees. Responsible for conducting M&V workshops with clients. Responsible for managing M&V contract costs to ensure minimal cost variance and for creating and implementing solutions to reduce shortfall amounts. Generally involved in projects with guarantees a high level of complexity. Responsible for understanding and correctly applying option A, B, C, & D type of guarantees. Follows established M&V program to monitor and manage energy consumption, utility supply, and facilities operations and maintenance programs to ensure that savings are consistent with performance contract contractual obligations and client goals. Pro-actively assistsProAmpac
Westfield, MA 01085 • (14.4 miles) • Full Time • 11/16/2026
The Summer 2027 Intern (Continuous Improvement Engineer) will learn from and participate with our Corporate Operational Excellence Team’s ongoing deployment of our continuous improvement program into one of our many manufacturing sites in the US. This internship will shadow and work with the local leadership teams to learn and assist with the implementation of lean manufacturing concepts with the front-line leaders and operators on our manufacturing shop floor. The project objective is to reduce manufacturing waste, improve operational efficiencies, and develop a problem-solving culture across a site. This internship will provide the incumbent the opportunity to learn about and participate in this type of implementation in a hands-on setting. MAJOR RESPONSIBILITIES Lead continuous imLeidos
Hartford, CT 06103 • (16.2 miles) • Full Time • 11/1/2026
Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! We are looking for a Lead Substation Project Engineer to join our team. *Candidates must be located in greater Boston, MA area. (MA, CT, RI) - 3 hour radius from the client servicing territory. At Leidos, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunHANWHA AEROSPACE USA LLC
Broad Brook, CT 06088 • (5.8 miles) • Full Time • $73,442 to $110,164 / yr • 11/17/2026
Job Title: Quality Engineer Exempt Status: Exempt Location: East Windsor, CT Company Description: Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: The Hanwha Aerospace USA Quality Engineer will be responsible for all activities associated with the Quality function reporting directly to the Quality Manager. Essential Functions: Ownership of quality performance of assigned part numbers/family. Creation of FAIRs and review of FAIRs as needed through net inspect. Participation and ownership of PPAP for assigned partsDOC
Hartford, CT • (16.4 miles) • Full Time • 11/17/2026
About DOC Our mission is to make a transformative impact on our communities through the exceptional buildings, infrastructure, and relationships we constructwith skill, purpose, integrity, and passion. Founded in 1879, DOC (Daniel O'Connell's Sons) is a trusted construction management and general contracting firm serving public and private clients across the Northeast and Florida. We bring togetherexpertisein building and heavy/civil construction to deliver complex, high-impact projects. At DOC, we believethere'salways a better way to build. Our team is driven by collaboration, accountability, and a commitment to continuous improvementconstantly learning, evolving, and pushing to deliver better outcomes for our clients and communities. Our Values Always do the right thing Support and respeManufacturing Inc
Southbridge, MA • (27.3 miles) • Full Time • 11/17/2026
We are seeking an experienced Hardware Engineer with a minimum of five years of hands-on expertise in electronic Design , PCB development, and production release. This position focuses on leading custom Design lifecycles for human-machine interface controls, integrating both electrical engineering and mechanical engineering concepts with a strong emphasis on low-power IT hardware and Medical device applications. The ideal Hardware Engineer will take ownership of hardware from initial Prototyping through regulatory verification, Manufacturing transfer, and ongoing field support. \n Benefits and Compensation \n \n Competitive Pay: $110k - $140k/yr DOE to start! If you are transitioning from another Accounting role, we offer great starting rates for our second-shift hours. \n Comprehensive BeEliassen Group
Bloomfield, CT • (13.7 miles) • Full Time • 11/17/2026
Description: On-site in Bloomfield, CT Our client seeks an experienced electromechanical Designer/Drafter to create and modify drawings, models, parts, and assemblies using Creo. This role supports Service Engineering’s Design Services group and requires proficiency with Windchill for data and workflow management. The position focuses on packaging for sheet metal, PCB, and electromechanical components, with an expectation to manage multiple tasks, collaborate effectively, and respond to requests in a timely manner. Due to client requirements, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $37.00 to $42.00/hr. w2 RespCardinal Engineering Associates, Inc.
Meriden, CT • (33.3 miles) • Full Time • $75,000 to $150,000 / yr • 11/17/2026
Job description: Cardinal Engineering Associates, Inc. an established consulting civil engineering firm located in central Connecticut and celebrating its 63 rd year in business is seeking Civil Engineers, Project Engineers, Project Managers, Resident Engineers, Construction Inspectors, CAD Technicians and a Civil Engineering Department Manager with well-rounded experience in civil engineering and expertise in Transportation, Water Resources, Municipal Engineering with the following qualifications: TRANSPORTATION and MUNICIPAL ENGINEERING Cardinal Engineering Associates, Inc. is also seeking a highly motivated individual with with 5 years' minimum experience in roadway design and municipal engineering, this position may also include project management, client management, construction contrTOWER LABORATORIES LTD.
Centerbrook, CT 06409 • (44.2 miles) • Full Time • $90,000 to $110,000 / yr • 11/17/2026
Our dynamic work environment is looking for motivated candidates ready to thrive. Are you ready to make an impact in pharmaceutical manufacturing? Apply today! Tower Laboratories is a leading effervescent product manufacturer in the U.S. We develop and manufacture over-the-counter medications, prescription pharmaceuticals, nutritional supplements, soft drink tablets and other consumer products on a contract basis. We are continually expanding our effervescent product base and currently have several new and interesting products in the research and development phase right now. We are a family owned company and have been in business for over 40 years. www.towerlabs.com. POSITION SUMMARY: This position will assist in the management, administration, and maintenance of the Quality System to ensuArcadia New England Home Care
Athol, MA 01331 • (44.6 miles) • Full Time • $21.00 to $22.00 / hr • 11/17/2026
Arcadia New England Home Care is immediately hiring a Caregiver Field Supervisor/Office Assistant for its Northern Massachusetts operations. This is a hybrid, flexible position with responsibilities both in the field and in the office, as needed, to support the day-to-day operations of the office as well as aide supervision, case opens and hands on personal care work in the field. Must have and be currently either a certified PSS or licensed CNA or LPN in Massachusetts. KEY RESPONSIBILITIES AND DUTIES: Supporting branch operations in the office, including home care scheduling, answering phones, scheduling, hiring & onboarding, service authorization tracking and other office duties. Case opens in the field in accordance with the plan of care. Observed performance of care aides to ensure proTiger Analytics Inc.
Hartford, CT • (16.4 miles) • Full Time • 11/17/2026
Tiger Analytics is pioneering what AI and analytics can do to solve some of the toughest problems faced by organizations globally. We develop bespoke solutions powered by data and technology for several Fortune 100 companies. We have offices in multiple cities across the US, UK, India, and Singapore, and a substantial remote global workforce. If you are passionate about solving business problems that can be solved using systems thinking, AI engineering and data driven Insights, Tiger Analytics would like to talk to you. Now hiring for multiple roles across solution architecture, consulting and forward deployed engineering teams Requirements Please note this is a Hybrid role with 3-4 days a week onsite. · Proficiency in SQL, Python, and core Google Cloud services (BigQuery, Dataflow, and ClBenesch
Glastonbury, CT • (20.2 miles) • Full Time • 11/17/2026
Simply Put, A Great Place to Work Benesch is a growing, multi-disciplined planning, engineering, and professional services firm. We enhance infrastructure and communities across the country – creating spaces and providing connections in ways that make a difference. We pride ourselves on being nimble enough to remain responsive to client needs yet large enough to offer exceptional bench strength. As a member of our team, you'll have an opportunity to draw from those resources when you need them and, likewise, contribute your expertise when you have something to share. At Benesch, we are looking for candidates with varied backgrounds and worldviews. We are committed to offering an inclusive work environment where everyone feels valued and respected. Statistics show that women and underrepresTalent Collaborative Group, Inc
Meriden, CT • (33.3 miles) • Full Time • 11/17/2026
Project Engineer (CDOT Experience) – Meriden, CT Why this role is good for you\n You’ll build on your CDOT experience to grow into a Project Management role, gaining unique expertise while managing documentation and compliance. What you’ll be working on (and more)\n \n \n Support CDOT heavy civil projects with scheduling, procurement, and project control. \n \n Ensure compliance with CDOT requirements. \n \n Gain exposure to both office and field operations. \n What you’ll do day-to-day\n \n \n Assist PMs with planning and scheduling. \n \n Handle submittals, RFIs, and document control. \n \n Coordinate with CDOT teams and subcontractors. \n What you get\n \n \n Medical, dental, and vision benefits. \n \n 401(k) with match. \n \n PTO and paid holidays. \n \n Tuition reimbursement. \n \n CaNE-XT USA
Windsor, CT 06095 • (9.8 miles) • Full Time • $80,000 to $110,000 / yr • 11/17/2026
About NE-XT\n New England Expert Technologies (NE-XT) is a precision manufacturing organization supporting customers in aerospace and other highly regulated industries. We are committed to quality, continuous improvement, and delivering reliable products that meet the highest industry standards. \nPosition Summary\n NE-XT is seeking a Product Quality Engineer (PQE) to support aerospace manufacturing quality initiatives through inspection planning, nonconformance management, corrective action leadership, supplier quality coordination, and continuous improvement. This role partners closely with engineering, operations, and quality leadership to reduce defects, improve process capability, and ensure customer compliance. \nCompensation\n $85,000–$110,000 annually, depending on experience, qualPrysmian
Willimantic, CT • (25.4 miles) • Full Time • $86,000 to $130,000 / yr • 11/17/2026
Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector. We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us. Controls Engineer is responsible for all PLC and computer software supporting production equipmentLoureiro Engineering Associates, Inc.
Plainville, CT 06062 • (26.6 miles) • Full Time • 11/17/2026
Loureiro Engineering Associates, Inc. is seeking a Survey Drafter to join our growing team. This position offers the opportunity to work on a variety of land surveying projects, collaborating with experienced survey professionals to prepare accurate survey maps, plans, and technical drawings. Our goal is to employ the right individuals to be part of our team, learning and working alongside experienced professionals who provide the guidance and mentoring needed to grow professionally. At Loureiro, you'll contribute to diverse projects while developing your technical skills in a collaborative, team-oriented environment. At Loureiro, you won’t just work for the company- you’ll own a part of it. As a 100% employee-owned company, our Employee Stock Ownership Plan (ESOP) gives you a company-fundTown Of Southington
Southington, CT 06489 • (30.4 miles) • Full Time • $108,083 to $118,427 / yr • 11/17/2026
TOWN OF SOUTHINGTON Job Description: ASSISTANT TOWN ENGINEER Department(s): Engineering Reports To: Town Engineer Employment Status: Full-Time; 35 hours, 8:30am – 4:30pm Salary: $108,083 - $118,427 Union: UPSEU Local 424-Unit 11 Summary: Step into a high-impact, senior-level role driving complex civil engineering projects and managing a full-service municipal engineering office. Reporting directly to the Town Engineer with considerable professional autonomy, you will apply advanced engineering principles to oversee everything from initial project plans and site surveys to cost estimates and final construction inspections. In this dynamic position, you will rely on your expert judgment to solve infrastructure challenges while leading and mentoring a multidisciplinary team of engineers, survAKRF, Inc.
Hamden, CT 06518 • (42.7 miles) • Full Time • $100,000 to $115,000 / yr • 11/17/2026
About the Role AKRF is continuing to grow its Traffic and Transportation practice and is seeking a Senior Project Engineer to join our team in Hamden, CT. This role will support a diverse portfolio of traffic engineering and transportation planning projects throughout Connecticut, serving regional, state, and municipal clients. The successful candidate will contribute to innovative solutions and collaborate with a talented team of professionals dedicated to technical excellence and client satisfaction. This is an exciting opportunity to play a key role in shaping the future of transportation throughout the region. Job Responsibilities: Work within a team of professionals to develop traffic and transportation planning and engineering solutions for various transportation projects. Conduct coDennis Group Inc
Springfield, MA 01103 • (8.5 miles) • Full Time • 11/16/2026
As a design/build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s Automation & Controls Engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our Automation & Controls Engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilitiesIgnis Global Recruitment
Springfield, MA • (9.1 miles) • Full Time • 11/16/2026
\n Title: Electrical Engineer \n \n \n Location: Remote or hybrid, in New England. The role carries a regular on-site expectation which suits someone based in New England. For a senior engineer who holds a PE and is set up to work independently, that expectation is flexed, which opens the role more widely across the region.\n \n \n Company: Multi-discipline engineering firm \n Salary: Up to $160,000, plus a discretionary annual bonus plus up to $10,000 sign on, if required \n \n About the work \n This is consulting-side building services electrical, taken from concept through construction administration. The engineer who designs a system is the one who answers for it on site, so the seat does not split into a drawing job and a site job done by different people. \n The firm works across rouTsugami Machining - America
Windsor, CT 06095 • (9.8 miles) • Full Time • $58,000 to $84,000 / yr • 11/16/2026
Join a USA Today Top Workplace! \n Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufactures maintain a competitive advantage in the world economy by improving productivity. \n Summary of Responsibility: \n Innovative Machinery Group is seeking an experienced CNC Programmer to support multi-axis turning operations, ranging from 2-axis tailstock lathes to sub-spindle / Y-axis configurations with the knowledge base to help support the milling department as needed. \n This is a hands-on role requiring a strong presence on the shop floor. The ideal candidate will be actively involved in developInner Circle Agency Inc.
Hartford, CT • (16.4 miles) • Full Time • $105,000 to $140,000 / yr • 11/16/2026
Job Title:\n Switchgear Design Engineer (UL891) Job Location:\n Charleston, SC / North Charleston, SC In-Office, Hybrid or Remote:\n On-site Working Hours:\n Full-time Languages:\n English required \n \n \n What the Client Offers:\n \n \n Salary: USD $105,000 – $140,000 \n \n Comprehensive benefits package \n \n Paid time off + 10 company holidays \n \n Tuition reimbursement \n \n 401(k) with strong employer contribution \n \n Stable, growth-oriented environment within a specialized engineering sector \n \n Relocation support available for the right candidate \n \n \n \n About the Client:\n Inner Circle Agency is hiring on behalf of a well-established engineering and manufacturing organization specializing in power distribution and electrical infrastructure. The company supports critical iA.R. Mazzotta
Hartford, CT • (16.4 miles) • Full Time • 11/16/2026
\n Manufacturing Engineer \n \n \n Direct Hire | $90,000–$110,000+ DOE | Comprehensive Benefits \n \n \n Hartford Area, CT \n \n \n \n \n \n The Right Plan. The Right Materials. The Right Time. \n \n \n \n \n \n Successful manufacturing depends on more than great engineeringit takes someone who can keep production organized, anticipate challenges, and ensure every project has what it needs to move efficiently from planning to completion.\n \n \n \n \n \n A.R. Mazzotta is partnering with a growing aerospace manufacturer seeking a Manufacturing Engineer to coordinate production planning, manufacturing documentation, and workflow. You'll work across multiple departments to ensure materials, work orders, and manufacturing processes stay aligned, helping deliver high-quality products on time.\nPalmer Foundry
Palmer, MA • (18.9 miles) • Full Time • $90,000 to $110,000 / yr • 11/16/2026
Summary: Palmer Foundry is seeking a hands-on Facilities Engineer to support the reliability, availability, and continuous improvement of our foundry equipment and facility systems. This position is responsible for developing and improving preventive maintenance programs, troubleshooting equipment failures, leading root-cause analysis, coordinating major maintenance activities, and driving improvements in equipment reliability and uptime. \n The Facilities Engineer will work closely with Production, Quality, Engineering, and Environmental, Health & Safety (EHS) to ensure equipment and facility systems operate safely, reliably, and efficiently. The ideal candidate combines strong mechanical and electrical troubleshooting skills with a practical, data-driven approach to equipment reliabilityGarg Consulting Services, Inc.
Rocky Hill, CT 06067 • (23.2 miles) • Full Time • $60,000 to $80,000 / yr • 11/16/2026
Project Administrator – Bridge Engineering Location: Rocky Hill, CT | Full-Time | On-Site Salary Range: $60,000 - $80,000 per year (based on experience) About Garg Consulting Services, Inc. Garg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm specializing in transportation infrastructure, bridge engineering, roadway design, and DOT projects throughout the Northeast. We are currently seeking a highly organized Project Administrator – Bridge Engineering to support bridge engineering projects in Connecticut. Position Overview The Project Administrator – Bridge Engineering will provide project coordination, documentation, reporting, and administrative support for our bridge engineering team. This role requires strong attention to detPolamer Precision, Inc.
New Britain, CT 06053 • (23.8 miles) • Full Time • 11/16/2026
Position: CMM Programmer Employee Type: Full-Time (1st Shift) CMM Programmer is a first shift position, based in our New Britain, CT facility. This position allows you to learn new programming techniques and expand your knowledge while working with the industries newest, cutting edge, technologies. Work as part of a team of programmers responsible for producing excellent quality, highly efficient, OpenDMIS CMM programs. Daily responsibilities include, creating offline and testing new CMM programs, troubleshooting and editing existing programs, and supporting the Inspection department, in an extremely fast paced environment. Polamer Precision CMM programmers, have the opportunity to work alongside the best, and brightest minds, working in Aerospace today. Knowledge/Skills/Abilities: • AbiliZulu Pods
Northampton, MA • (24.5 miles) • Full Time • 11/16/2026
Zulu Pods is building the critical infrastructure behind expendable and attritable platforms, and we are seeking highly motivated team players to join us in this mission. At Zulu Pods, we operate with Integrity , take Extreme Ownership , lift each other up with Servant Leadership , win by Exceeding Expectations , and succeed with Optimistic Vision . If these values describe you, please continue: We are seeking an experienced Manufacturing Engineer to join our team. The ideal candidate will have a strong background in machining precision components in the aerospace industry, with proficiency in MasterCAM and CNC toolpath generation for lathe and milling operations. You will be responsible for interpreting complex engineering drawings and CAD, programming toolpaths, and ensuring that all tooPrecision Fuzing And Sensors
Middletown, CT 06457 • (30.6 miles) • Full Time • $80,000 to $95,000 / yr • 11/16/2026
Supplier Quality Engineer Precision Fuzing and Sensors is actively hiring for a Supplier Quality Engineer in Middletown, CT. This role is responsible for performing supplier qualifications, performance monitoring, and developing and documenting first article inspections. The ideal candidate will need to have experience analyzing supplier processes and products, conducting root cause analysis for issues with parts, performing audits, driving corrective actions, and rejecting/do a part stoppage if they arrive with defects. Responsibilities: Maintain the supplier rating system, which will define the total cost of ownership of products procured from suppliers including performing supplier source inspections, first article inspections, supplier surveys and audits assuring supplier corrective acR & R Window Contractors, Inc.
Easthampton, MA 01027 • (23.6 miles) • Full Time • $60,000 to $100,000 / yr • 11/15/2026
Benefits: Profit Sharing Plan FSA for Medical/Child care Disability Insurance Life Insurance Health insurance Paid time off 401(k) Dental insurance Join our Team: We are seeking a motivated and detail-oriented Facade & Panel Project Engineer / Manager to join our team. If you have at least five years of commercial construction experience, experience with facade systems, architectural panels, drafting, detailing, engineering, or project management, or a degree in Construction Management, Building Construction Technology, Engineering, Architecture, or a related field, we encourage you to apply. Not a Project Manager Yet? That's okay. Whether you're an experienced Project Manager or a facade professional looking to transition into project management, we want to hear from you. Candidates withIron Sky Recruiting
Worcester, MA • (43.1 miles) • Full Time • 11/15/2026
\n Transportation Designer\n \n Location: Lawrence, MA or Worcester, MA\n \n Salary: Competitive compensation, based on experience\n Overview \n A growing civil engineering firm is seeking a Transportation Designer to join its team in Lawrence or Worcester, MA. This is a versatile opportunity for early-career engineers to gain exposure across a variety of transportation and civil disciplines, including highway, roadway, bridge, and land development projects. With involvement from planning through construction, this role is ideal for someone looking to develop both technically and professionally without being confined to a narrow scope of work. \n The Role \n As a Transportation Designer, you will contribute to a range of municipal and state agency projects. The role includes preparation ofEchoStar
Springfield, MA • (9.1 miles) • Full Time • $24.25 / hr • 11/14/2026
What Success Looks Like (Objectives):\n What You’ll Do: \n You’ll visit customers’ homes, solve problems, and introduce them to smart home tech. \n \n Install and service DISH, Starlink and smart home solutions in customers’ homes \n Teach customers how to use their tech and offer additional services when helpful \n Keep a clean work area and maintain a professional attitude while working independently but staying connected with the team \n What’s in it for You: \n \n Career Growth: Start here and grow fast! Many of our leaders began in this role, with opportunities to move into different departments for new challenges \n Pay Increases: Automatic promotion after 6 months with a $1/hour raise. Additional promotions with 5–10% pay increases based on performance \n Bonus Potential: Earn up toQUASENT INC
Fiskdale, MA 01518 • (24.2 miles) • Full Time • $180,000 to $200,000 / yr • 11/14/2026
Benefits: 401(k) Health insurance Vision insurance Quasent is looking for a Senior Civil Structural Engineer for a fulltime position in Chicago! Resumes to Civil Structural - Licensed SE Engineer, Chicago, IL Location: Chicago IL Travel to various client locations estimated to be 25%-30 % Salary Range: $180k - $200k plus extensive benefits. Experience Range: 13 -15 Years Job Description & Skill Requirement: Civil Structural SE licensed in Illinois with 15+ years of Engineering experience in Oil & Gas, refining, Petrochemicals facilities, in compliance with local codes and standards, project design basis, & client specific standards Required background and skills: Experienced in Oil & Gas Midstream or Downstream facilities, or Petrochemical facilities in FEED, Detailed Engineering ProjectsJoy And Grace LLC
New Britain, CT • (24.4 miles) • Full Time • $100,000 to $160,000 / yr • 11/14/2026
Responsibilities: \n \n Analysis, design and computer modeling of structures. \n Coordination with architectural, mechanical, electrical and civil disciplines to complete projects. \n Production of plans, details and specifications. \n Review of shop drawings, construction administration. \n Full responsibility for interpreting, organizing, executing and coordinating assignments. \n Plans and develops engineering projects concerned with unique or controversial complexities which have important impact on major company programs. \n The exploration of subject area, definition of scope, selection of areas for investigation and development of novel concepts. \n Acts as technical liaison to individuals within and outside the organization with responsibility to act independently regarding technicIntelliPro Group Inc.
Dudley, MA 01571 • (32.2 miles) • Full Time • $50.00 to $60.00 / hr • 11/14/2026
Senior Automation Engineer / Sr. Mechanical Engineer Dudley, MA | 100% Onsite Full-Time | 40 hrs/week 6-Month Contract | Potential Temp-to-Perm Start: ASAP Pay: $60/hr on w2 We are looking for a Senior Automation Engineer to lead automation and assembly projects from design through commissioning and production release. Key Requirements: BS in Engineering with 7+ years of experience Strong PLC programming Ladder Logic & Structured Text HMI development and machine controls 6-axis robotics programming/integration 3D CAD / SOLIDWORKS Electromechanical systems and automated assembly Sensors, robotics, conveyors, and machine design High-volume manufacturing experience Strong troubleshooting and project management skills Experience with Fanuc, Denso, or YuMi is a plus Lean Six Sigma/SPC and machiCheech & Chongs Dispensoria
South Deerfield, MA 01373 • (33.9 miles) • Full Time • $18.00 / hr • 11/14/2026
OUR MISSION We believe that different perspectives ignite innovation and drive us forward. Our mission is to create a vibrant workplace where everyone feels seen, heard, and empowered to reach their full potential. We're passionate about equal opportunities, championing community engagement, and fostering an environment where open dialogue and mutual respect thrive. Just like how different strains bring their own unique highs, our diverse team infuses fresh ideas and perspectives into everything we do! What You'll Do: Hey there, all you cool cats and cannabis enthusiasts! We're Cheech and Chong Dispensoria, and we're looking for a Groovy Budtender to join our laid-back team. If you're all about spreading good vibes, helping folks find their perfect strain, and creating a mellow atmosphere,Naiad Dynamics US, Inc.
Hamden, CT • (44.8 miles) • Full Time • 11/14/2026
Manufacturing Engineer, OEM - CT **Immediate Opening An exciting opportunity to join a world-leading Original Equipment Manufacturer (OEM) specializing in high-end marine machinery systems for the luxury yacht, commercial ship, and military ship market sectors. We are a dynamic team of professionals supplying our highly successful technology-based products worldwide. Position Description Naiad Dynamics US, Inc. (ND) is actively seeking highly skilled and detail-oriented Manufacturing Engineer for our Shelton, Connecticut facility. Reporting to the Group Production Manager and collaborating with cross-functional teams, you will play a crucial role in designing, implementing, and optimizing our CNC and manual manufacturing systems and processes in a production environment. The ideal candidatBalance Professional
Athol, MA • (44.9 miles) • Full Time • 11/14/2026
\n Job Title: Design/ Process Engineer\n \n \n Salary: $75,000/yr\n \n \n Schedule: Monday-Friday\nBirdon America, Inc.
Portland, CT 06480 • (26.7 miles) • Full Time • $95,000 to $105,000 / yr • 11/14/2026
Roles and Responsibilities: Independently plan and execute engineering and technical work related to the design, drafting, and continuous improvement of manufactured products and processes. Create and maintain 2D drawings, 3D models, and detailed manufacturing prints based on production requirements and existing designs. Develop manufacturing-ready drawings in accordance with applicable industry and internal engineering standards. Validate product designs using 3D modeling tools to ensure proper form, fit, and function with real-world manufacturing constraints. Assign and manage part numbers for fabricated and purchased components in alignment with company systems. Maintain and organize engineering documentation, including production drawings and revisions, within Autodesk Vault or similarLiquidPiston
Suffield, CT 06078 • (4.8 miles) • Full Time • 11/14/2026
Metallurgical Engineer This role is fully onsite in Bloomfield, CT, five days per week, and the company will be relocating to Suffield, CT later in 2026. About LiquidPiston: LiquidPiston, Inc. is developing a fundamentally new rotary internal combustion engine based on our patented thermodynamic cycle. With applications across aerospace, defense, commercial, and industrial markets, we are redefining what’s possible in compact, efficient power generation. Join our mission to develop game-changing engine technology using advanced materials and manufacturing processes. Position Overview: LiquidPiston is seeking a Metallurgical Engineer to lead materials-focused efforts in support of engine design, development, and testing. This hands-on role is critical to enhancing performance, durability, aEgis Group
East Hartford, CT • (15.5 miles) • Full Time • 11/14/2026
Company Description Lochner and Egis are entering an exciting new chapter as one organization. We have combined decades of trusted U.S. engineering expertise with the global reach, technical excellence, and career opportunities of a leading international engineering, consulting, and infrastructure firm. While our name has changed, our commitment to our people, clients, and communities is stronger than ever. At Egis, every project is an opportunity to create lasting impact. We collaborate with public and private clients to design and deliver innovative transportation, aviation, rail, transit, water, structural, environmental, and infrastructure solutions that connect communities and improve everyday life. Join a team where innovation is encouraged, collaboration is valued, and your work helPro QC International North America
Hartford, CT 06103 • (16.3 miles) • Part Time • $32.00 to $45.00 / hr • 11/14/2026
We’re seeking a detail-oriented Supplier Quality Auditor to evaluate supplier quality systems and supply chain processes. The successful candidate will conduct audits, communicate findings, and verify corrective actions to support consistent quality and supplier performance. Responsibilities Conduct supplier, ISO 9001, and process-based audits. Assess supplier quality systems and supply chain processes. Support supplier evaluation and qualification. Prepare clear, accurate audit reports. Perform root cause analysis and verify corrective and preventive actions (CAPA). Work with suppliers and internal teams to address audit findings and improve quality. Qualifications Bachelor’s degree in Engineering, Quality Management, Manufacturing, Industrial Engineering, or a related technical field. 3–The Reserves Network Inc
West Hartford, CT • (18.2 miles) • Full Time • 11/14/2026
\n Senior Design Engineer\n \n \n West Hartford, Connecticut | Full Time | Direct Hire\n \n Salary: $130,000 to $160,000\n \n \n \n \n \n What Matters Most\n \n \n • $130,000 to $160,000 base salary, with flexibility toward the top of the range for highly experienced candidates\n \n \n • Full time, direct hire opportunity in West Hartford, Connecticut\n \n \n • 8+ years of engineering experience in firearm product design and development\n \n \n • Strong firearm mechanics, ballistics, materials science, and manufacturing knowledge\n \n \n • PTC Creo CAD experience required\n \n \n • Full product lifecycle ownership from concept and prototyping through testing and production\n \n \n • Technical leadership opportunity with mentorship responsibility for junior engineers and design staff\n \n \HiFyve
Glastonbury, CT • (20.2 miles) • Full Time • $80,000 to $120,000 / yr • 11/14/2026
Manufacturing company in the Aerospace industry located in Glastonbury, CT is looking for an experienced Mechanical Engineer to join their team!! \n\n\n Pay Rate: $80,000 - $120,000 plus bonus \n\n Schedule: Days; flexible around normal first shift hours. \n\n Location: Glastonbury, CT \n\n\n Job Summary: We are looking for a creative Mechanical Engineer to work on all product stages from research and development to design and manufacture, customer acceptance and after sale support. This position is for an experienced Mechanical Engineer supporting the Support & Test Equipment (STE) team. Primary tasks will be developing mechanical design solutions to a variety of problems including structures, pneumatics, hydraulics, tooling, fixtures and hands on troubleshooting. \n\n\n ResponsibilitiesSecureTek Solutions
Newington, CT 06111 • (22.4 miles) • Full Time • $45.00 to $60.00 / hr • 11/14/2026
CNC Programmer\n Location: Connecticut \n Pay: Targeting around $50/hour, depending on experience \n Schedule: 7:00 AM start; ideally 10-hour workdays \nPosition Overview\n We are seeking an experienced CNC Programmer to join a large manufacturing facility specializing in machining large components for the aerospace industry, including parts for Pratt & Whitney and Sikorsky. \n The ideal candidate will have a strong background in CNC programming, preferably with milling experience. Candidates with experience programming CNC lathes, mills, or vertical turning lathes (VTLs) will also be considered. Experience with SURFCAM or Siemens NX is preferred, but candidates with other CAM software backgrounds are encouraged to apply. \nResponsibilities\n \n Develop and modify CNC programs for machininAmwins Internships
Farmington, CT • (23 miles) • Full Time • 11/14/2026
At Amwins, we succeed together . Our internship program was recognized as one of the 2026 RISE Elite 50 Internships, and it reflects what we believe: great careers start with great experiences. That's why we've built a culture centered around collaboration, mentorship, and growth. At Amwins, students are given the opportunity to contribute in meaningful ways, learn from experienced industry professionals, and gain exposure to the business from day one. Interns will gain hands-on industry experience, participate in professional development opportunities, and work alongside experienced professionals on real business initiatives. Along the way, Interns will strengthen key professional skills and develop the confidence to grow into future leaders at Amwins. Why Amwins? We're not just a companyPersonnel People
Charlton, MA 01507 • (31.9 miles) • Full Time • $38.00 / hr • 11/14/2026
This position is a DIRECT HIRE ROLE from day one Responsibilities: Setup and operate CNC lathe machines Reading and understanding blueprints, mechanical drawings Prepare and load raw materials and parts on machine In-process inspection of product Preventative maintenance on machine as needed Qualifications: Previous CNC lathe experience Programming experience would be a plus Understanding and reading of blueprints and mechanical drawings Experience with measuring instruments such as: micrometers, calipers, verniers The hours are: Monday – Friday – 7am to 3:30pm Pay: The pay is up to $38.00 an hour based on experience \nCompany Description We are here to help We represent only the most reputable corporations and with our vast network of clients, we are able to find the best jobs at the mostTIMES MICROWAVE SYSTEMS
Wallingford, CT • (38.5 miles) • Full Time • 11/14/2026
Summary Qualified candidates will combine technical and customer service skills to provide differentiated RF/microwave interconnect solution for a broad range of requirements in various market segments. They will apply analytical and communication skills to assist customers in their product development process and provide on-site support as needed. Essential Duties and Responsibilities Collaborate with Business Development Managers and Program Managers to provide technical support, secure design wins, and drive revenue growth. Interface with customers, identify their needs, and develop differentiated solution. Support key account strategy by developing partnership with customer's technical stakeholders and providing subject matter expertise. Provide on-site product support and/or trainingAbbVie
Worcester, MA • (43.1 miles) • Full Time • 11/14/2026
Company Description About AbbVie AbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas including immunology, oncology and neuroscience - and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us atwww.abbvie.com. Follow @abbvie onLinkedIn,Facebook,Instagram,XandYouTube. Job Description Purpose The Global Process Support Engineer (Aseptic) will support the AbbVie Technical Operations Functions and the AbbVie Technical Centers worldwide. This position will be responsible for applying advanced scientific knowledge, engineering knowledgBETA GROUP INC
Hartford, CT 06114 • (17.9 miles) • Full Time • $106,000 to $160,000 / yr • 11/13/2026
Description: In the ever-evolving realm of traffic engineering, from V2I to P2P to ATSPM, transformative changes are taking place. BETA stands at the forefront of these technological strides and is actively seeking to expand our team with individuals who are passionate about innovation and adept at problem-solving. We currently have an exciting opportunity for an experienced Senior Traffic Engineer with a forward-thinking mindset, particularly skilled in signal and signal system design. The Senior Traffic Engineer will play a key role in performing and overseeing technical designs, development of projects from conceptual to final design, oversee the preparation of contract plans and documents, mentor staff, manage traffic projects and perform business development, project pursuits, and cliWeston & Sampson Engineers Inc
Rocky Hill, CT 06067 • (23.2 miles) • Full Time • $85,000 to $105,000 / yr • 11/13/2026
Weston & Sampson is seeking a Water Infrastructure Project Engineer to join our Drinking Water Program. In this role, you'll help plan, evaluate, design, and improve the municipal water infrastructure that communities depend on every day. You'll contribute to a variety of projects, including water main design and replacement, water distribution system improvements, pump stations, water storage, and drinking water treatment. Working primarily with municipal clients, you'll help evaluate existing infrastructure, identify system deficiencies, and develop practical engineering solutions that support reliable water service and long-term capital improvement needs. You'll work alongside a collaborative team of water professionals, with opportunities to expand your technical skills, take on new rePlastic Molding Manufacturing
Berlin, CT 06037 • (28.2 miles) • Full Time • 11/13/2026
Company Overview: Plastic Molding Manufacturing (PMM) is a leading provider of innovative solutions in the plastics injection molding industry. With a focus on cutting-edge technology and exceptional customer service, we strive to deliver high-quality products that meet the unique needs of our clients. As we continue to expand our operations, we are seeking a talented and motivated Sales Engineer to join our dynamic team. Job Summary: We are seeking a skilled and experienced Quality Engineer to join our team in the plastic injection molding industry. The ideal candidate will be responsible for overseeing and ensuring the quality of our production processes, products, and services. This role requires strong leadership abilities along with practical experience in quality control methodologieIPG Photonics
Webster, MA 01570 • (36.6 miles) • Full Time • $112,000 to $150,000 / yr • 11/13/2026
IPG Photonics is revolutionizing the laser industry as the pioneering developer and leading producer of fiber lasers and amplifiers. Headquartered in Marlborough, MA, IPG has over 4,800 employees in more than 30 locations around the world. We aspire to work together with our employees and customers to apply light in ways that improve life. Our mission is to develop innovative laser solutions to make the world a better place. To accomplish this mission, we are committed to attracting and retaining the best talent and an engaged and thriving workforce that drives a sustainable future for our company and society. Working at IPG Photonics you can expect challenging projects, a motivating and friendly environment, and competitive benefits. We are seeking a highly skilled Laser Component ReliabiVIABILITY, INC
Springfield, MA 01104 • (10.3 miles) • Full Time • $120,000 to $135,000 / yr • 11/13/2026
Position Title: Full Stack Engineer Location: Remote EST Time Zone Employment Type: Full-Time, Salaried Exempt Schedule: Monday–Friday About the Opportunity Cascadience, a VIABILITY Company, is building Volio , an innovative AI-powered digital companion designed to support neurodivergent individuals, including people with ADHD, Autism, and Anxiety. Volio is evolving into an engaging student companion that combines AI-powered support, intelligent scheduling, long-term memory, and gamified experiences to help reduce cognitive overload and support independence. This is a unique opportunity to join a startup initiative backed by a 56-year established organization . As a Full Stack Engineer, you'll help build and scale the technology behind Volio while working closely with product, operations,AAA USA
Windsor Locks, CT 06096-1152 • (6.5 miles) • Full Time • $55.00 to $60.00 / hr • 11/13/2026
Must be willing to temporarily and/or permanently relocate to Kinston, NC for work. We are seeking skilled NDT professionals experienced in inspecting aircraft components, materials, and assemblies without causing damage. Candidates should have hands-on experience with ultrasonic inspection methods and the ability to evaluate components for compliance with engineering, quality, and customer requirements. This is an excellent opportunity to join long-term aerospace programs offering competitive pay, overtime opportunities, relocation assistance, and career growth within the aerospace industry. Why Aerospace Professionals Choose AAA USA: Competitive Pay. Overtime Opportunities. Long-Term Aerospace Programs. Multiple U.S. Locations. Relocation Assistance Available. Referral Programs. Medical,TOMZ Manufacturing Corp
Berlin, CT 06037 • (28.2 miles) • Full Time • $100,000 to $130,000 / yr • 11/13/2026
\n Shape scalable, compliant manufacturing in Berlin, CT\n Reporting to the Engineering Manager, you will be the go-to engineer who transforms concepts into stable, efficient production for TOMZ’s medical device components. Our products are built through highprecision metal machining, finishing, assembly, and anodizingyour expertise ensures those processes run safely, repeatably, and costeffectively at mid to high volumes. \n\n A week in the role\n \n Walk the floor to eliminate downtime, scrap, and tooling issues; launch quick containment and durable countermeasures when defects surface. \n Optimize tooling through toollife studies and process capability analyses to improve throughput and reduce cost. \n Lead production transfers and rampups, standing up robust processes ready for volumeAperture Optical Sciences Inc.
Meriden, CT 06450 • (33.1 miles) • Full Time • $70,000 to $110,000 / yr • 11/13/2026
We are seeking a detail-oriented and technically strong Manufacturing Engineer to support the production of precision optical components and assemblies for satellite telescope systems and high energy optics. This role bridges engineering design and production execution by translating customer requirements into manufacturable technical documentation, optimizing workflows, and ensuring quality compliance in a high-precision environment. \n The ideal candidate combines hands-on manufacturing knowledge with strong documentation skills and a continuous improvement mindset. \n Key Responsibilities \n Technical Documentation & Production Planning \n \n Interpret customer specifications and engineering requirements, translating them into detailed technical drawings and manufacturing documentationCKS Packaging
Naugatuck, CT 06770 • (42.7 miles) • Full Time • 11/13/2026
CKS Packaging is seeking an experienced Plant Engineer to join our plant in Naugatuck, CT . The Plant Engineer will be responsible for improving the reliability, efficiency, safety, and performance of plant equipment, production processes, utilities, and infrastructure. This position will work closely withPlant Management, Production, Maintenance, Quality, and Process Technicians to troubleshoot technical issues, improve equipment performance, support capital projects, reduce downtime and scrap, and implement continuous improvement initiatives. The ideal candidate will have strong hands-on manufacturing engineering experience and a solid understanding ofplastic blow molding equipment, automation, electrical systems, hydraulics, pneumatics, PLCs, compressed air, chillers, and industrial utiButler America Aerospace
Windsor Locks, CT • (6.5 miles) • Full Time • $38.00 to $43.00 / hr • 11/12/2026
Test Engineer - 2nd Shift Location: Windsor Locks, CT Job ID: #73423 Pay Range: $38-43 \n 12 month contract \n Description: \n The Test Engineer provides hands on technical support for equipment installation, testing, troubleshooting, maintenance, and field operations. This role performs verification and functional testing, diagnoses issues on site, supports system upgrades, and ensures equipment operates safely, efficiently, and in accordance with engineering and customer requirements. \n Primary Responsibilities: \n Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. \n Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. ResponsibilitiesCS GROUP
East Hartford, CT 06108 • (14.5 miles) • Full Time • 11/12/2026
Company Description CS Group USA, a subsidiary of CS Group, is a key player in the development and certification of safety-critical systems in the aerospace industry in the United States. Joining CS Group USA is a unique opportunity to work on complex high-tech systems for the most prestigious aerospace manufacturers in the country. Our team operates primarily remotely, with employees based across multiple U.S. states, offering flexibility while staying closely connected. We offer competitive compensation, comprehensive benefits, and a collaborative environment that fosters skill development and active involvement in the company’s growth Job Description We are seeking an Electrical Engineer with experience in hardware development to provide technical direction across requirements, design aAptyx
West Torrington, CT 06790 • (31.2 miles) • Full Time • $85,000 to $115,000 / yr • 11/12/2026
Position Summary We are seeking a highly technical, hands-on Mechanical Manufacturing Engineer to support New Product Introduction (NPI), manufacturing process development, product launches, and ongoing production operations within a growing medical device manufacturing environment. This role is responsible for developing, implementing, and improving manufacturing processes, equipment, tooling, fixtures, and production methods to ensure products can be manufactured safely, efficiently, consistently, and at the required quality standards. The Mechanical Manufacturing Engineer will work closely with Program Management, Product Development, Quality, Operations, Tooling, Maintenance, and Engineering to take products from initial development through production launch and to provide ongoing engiDURHAM Manufacturing
Durham, CT 06422 • (36.6 miles) • Full Time • $90,000 to $150,000 / yr • 11/12/2026
Engineering Manager The Durham Manufacturing Company | Durham, CT | Full-Time | Manufacturing Environment Are you a hands-on engineering leader who thrives in a fast-paced manufacturing environment? Durham Manufacturing is seeking an experienced and driven Engineering Manager to lead engineering operations, continuous improvement initiatives, automation efforts, and process optimization at our Durham, CT facility. This role is ideal for someone who enjoys balancing strategic leadership with strong floor presence and technical involvement. The Engineering Manager will work closely with Operations, Quality, Maintenance, Safety, and Production teams to improve manufacturing performance, drive accountability, support automation initiatives, and implement operational improvements across the facO.F. Mossberg & Sons Inc
North Haven, CT 06473 • (44.5 miles) • Full Time • $23 / yr • 11/12/2026
Job purpose Under direction of the Sr. Design Engineering this position will assist Design Engineering developing and monitoring designing methods and process for the production of company products. Duties and responsibilities Test product and using lab instrumentation to measure critical functional aspects of new products Modeling and drawing components and assemblies in Solid Works Managing portions of development projects Documenting design reviews Managing engineering documentation Will be assigned to special projects to assist and facilitate these functions. Perform other duties as assigned or as dictated by position responsibilities. Qualifications Pursuing an Engineering degree at an accredited college/university and have completed 1 to 3 years in Mechanical Engineering. Aptitude inG & F Precision Molding Inc
Fiskdale, MA 01518 • (24.2 miles) • Full Time • $120,000 to $150,000 / yr • 11/12/2026
Job Title: Senior Project Engineer Company: G&F Precision Molding Inc. Department: Engineering Reports to: Director of Engineering Location: Onsite – Fiskdale, MA (5 days/week) Salary Range: $125,000 – $150,000 per year About Us We are agile, innovative, customer-centric, and dedicated to providing specialized, creative solutions in the life science, medical device, and pharmaceutical sectors. G&F Precision tackles challenging projects from concept to execution, offering custom solutions to universal manufacturing needs. The Opportunity We are seeking a dedicated Senior Project Engineer to join our team to lead complex engineering operations, bridging the gap between design teams and on-site execution. What You’ll Do Direct Operations: Provide technical leadership for manufacturing processBICRON ELECTRONICS
West Torrington, CT 06790 • (31.2 miles) • Full Time • $75,000 to $85,000 / yr • 11/12/2026
iNRCOREGroup is a leading, vertically integrated provider of highly engineered, high-reliability, and high-performance passive electronic components. We are known for manufacturing proprietary magnetics, capacitors, resistors, filters, and more. We serve mission-critical data and power applications in the Defense, Aerospace & Avionics, Space, Smart Grid, Medical, AI/Data center, and Hi-Rel industrial markets. iNRCORE Group currently has fourteen (14) manufacturing facilities across the globe with more than one thousand (1000+) employees – and growing! Our business entities include company names such as Bicron, Coast Magnetics, DYCO, Gowanda, iNRCORE, Passive Plus, RCD, Sentran, TTE, and Vanguard Electronics. Our organization has a world-class reputation for innovation, quality products andElement2 Group
Farmington, CT 06032 • (22.8 miles) • Full Time • $95,000 to $115,000 / yr • 11/12/2026
Quality Engineer\n Location: Farmington, CT \n Pay: $95,000–$115,000 per year \n Schedule: 1st Shift | Monday–Friday, 7:00 AM–3:30 PM \n Job Type: Full-Time, Direct Hire \nPosition Overview\n An established aerospace manufacturer in Farmington, CT is looking for a Quality Engineer to join its Quality team. This person will work closely with the Quality Manager, manufacturing, engineering, and inspection teams to maintain quality standards, address production issues, and improve overall processes. \n This is a hands-on role that combines product quality, problem-solving, documentation, and quality system responsibilities. The ideal candidate has experience in aerospace or precision manufacturing and understands industry quality requirements. \nResponsibilities\n \n Support daily quality opePMM - America's Technology Molder
Berlin, CT 06037 • (28.2 miles) • Full Time • 11/12/2026
Description: Company Overview: Plastic Molding Manufacturing (PMM) is a leading provider of innovative solutions in the plastics injection molding industry. With a focus on cutting-edge technology and exceptional customer service, we strive to deliver high-quality products that meet the unique needs of our clients. As we continue to expand our operations, we are seeking a talented and motivated Sales Engineer to join our dynamic team. Job Summary: We are seeking a skilled and experienced Quality Engineer to join our team in the plastic injection molding industry. The ideal candidate will be responsible for overseeing and ensuring the quality of our production processes, products, and services. This role requires strong leadership abilities along with practical experience in quality controlOn Point Construction Services
Springfield, MA 01001 • (6.5 miles) • Full Time • $65,000 to $90,000 / yr • 11/11/2026
Job Description – Construction Support Services – Western Massachusetts This is a highly unique opportunity to be on the front line of the evolving construction planning and project controls industry, working on major contracts with a diversified client field of established construction firms. As our operations have grown we are looking for a Civil Engineer, Construction Manager or Information Technology Specialist with 1-5 years of engineering/construction experience to join our team. Experience working on construction projects and a bachelor’s degree in an Engineer field is a plus. This person will work with our senior level staff to provide construction project management support services to our clients on multiple heavy civil (bridge, highway, utility) and commercial construction projeCogent Talent Solutions
Bloomfield, CT • (13.7 miles) • Full Time • $105,000 to $120,000 / yr • 11/11/2026
\n The Mechanical Engineer is responsible for designing, developing, and improving mechanical systems, components, and products to support engineering and production operations. This role involves applying engineering principles, conducting analysis, and collaborating with cross-functional teams to ensure projects meet technical requirements, safety standards, and customer expectations. The Mechanical Engineer plays a key role in driving innovation, product quality, and efficiency improvements across the organization. The Mechanical Engineer reports directly to the Chief Technology Officer (CTO). This position may collaborate with Fabrication, Assembly, Maintenance, Quality, and Production teams.\n \n \n \n \n \n You must be a US Citizen or Green Card holder and live in the Hartford, CT arWieland
Waterbury, CT 06706 • (39.4 miles) • Full Time • $100,000 to $115,000 / yr • 11/11/2026
Overview \n Wieland - Creating Value for Generations! \n\n Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. \n\n Wieland's Cultural Values \n Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities.With our cultural vision, we place our core values at the heart of everything we do: safety , ambition , optimism , reliability , ownership , diversity , & respect . \n\n Wieland is hiring a Sr. Quality Engineer .The Sr. Quality Engineer will be resGreaves Corporation
Centerbrook, CT 06409 • (44.2 miles) • Full Time • $85,000 to $105,000 / yr • 11/11/2026
1. SCOPE Engineer 3 represents a mid-level engineering role within Greaves Corporation. This role is responsible for advanced product design, cross-functional leadership collaboration, mentoring Engineers I & II, and ensuring engineering projects meet business, quality, and production goals. Engineer 3 acts as a technical team leader, coordinating between engineering, manufacturing, quality, and sales to deliver reliable, cost-effective products to market. ________________________________________ 2. REQUIRED SKILLS • Advanced CAD & Design o Mastery of SolidWorks (3D modeling, assemblies, production drawings, PDM/ERP integration). o Ability to set complex geometric dimensioning and tolerancing (GD&T) standards. o Experience with finite element analysis (FEA) and design validation. • DocumenL.S. Starrett Company
Athol, MA 01331 • (44.6 miles) • Full Time • $85,000 to $100,000 / yr • 11/11/2026
Job Summary: The Continuous Improvement Engineer leads initiatives that improve safety, quality, delivery, cost, and productivity across manufacturing operations. This role partners with cross functional teams to identify improvement opportunities, implement Lean manufacturing principles, standardize processes, and drive sustainable operational excellence. The position supports a culture of continuous improvement through data driven problem solving, employee engagement, and hands on coaching. Duties and Responsibilities: Lead cross-functional teams to improve safety, quality, productivity, and efficiency. Lead continuous improvement initiatives using Lean manufacturing principles and structured problem solving. Analyze manufacturing processes and performance metrics to identify opportunitiSanders Industries Holdings
Bloomfield, CT 06002 • (13.5 miles) • Full Time • $80,000 to $95,000 / yr • 11/11/2026
Kaman Air Vehicles is seeking a Quality Engineer who supports quality assurance activities within an aerospace manufacturing environment, working closely with Operations, Engineering, and Quality to ensure products and processes meet customer, regulatory, and internal requirements. This role supports inspections, audits, corrective actions, quality investigations, and continuous improvement initiatives. Essential Functions & Responsibilities Support quality assurance processes, procedures, and documentation in accordance with company and customer requirements. Perform and support internal quality audits and assist with maintaining compliance with AS9100 and applicable quality standards. Investigate quality issues and support root cause analysis and corrective/preventive actions (CAPA) . PaSkylimit Systems
Granby, CT • (14.4 miles) • Full Time • $125,000 to $145,000 / yr • 11/11/2026
About the Role \n Join a growing aerospace and defense manufacturing organization as a Lead Manufacturing Engineer, where you'll combine technical expertise, team leadership, and continuous improvement to support complex manufacturing programs. This opportunity is ideal for an experienced engineer who enjoys leading technical teams, improving manufacturing processes, and helping drive projects from development through production. \n In this role, you'll lead a team of engineers supporting manufacturing operations and serve as the technical owner for assigned product lines. You'll work closely with Production, Engineering, Quality, and Program teams to improve processes, resolve technical challenges, support new product development, and ensure successful project execution. \n\n Key ResponsiW3Global Inc.
Avon, CT • (20.4 miles) • Full Time • $50.00 to $55.00 / hr • 11/11/2026
We are working with Our Client to identify a skilled CNC Programmer responsible for developing and refining machining programs to support high-precision production. This role focuses on improving machining efficiency while maintaining strict quality standards. \n Key Responsibilities: \n \n \n Develop and modify CNC programs for milling and multi-axis equipment \n \n Analyze technical drawings and 3D models to determine machining strategy \n \n Select tooling, speeds, and feeds to optimize performance \n \n Test and validate new programs directly on machines \n \n Identify machining issues and implement process improvements \n \n Coordinate with engineering and shop floor teams to ensure production accuracy \n \n Maintain organized program files and version tracking \n \n Qualifications: \Roller Bearing Company Of America, Inc
Middlebury, CT 06762 • (43.1 miles) • Full Time • $23.00 / hr • 11/11/2026
ESSENTIAL FUNCTIONS OF THE JOB: Must be proficient in reading and understanding shop orders, blueprints including GD & T Create detailed technical drawing using SolidWorks Translate design concepts into precise prints & 3D models Collaborate closely with engineers to ensure accuracy and compliance with specifications Revise and update drawings based on feedback and design changes. Maintain organized drawing files and documentation for easy reference. Performs work under direct supervision. Willingness to work in a team environment Other duties as assigned by the supervisor. Attendance at work is an essential function of the job. JOB REQUIREMENT: Proficiency in SolidWorks and a strong understanding of drafting standards and GDT. Ability to understand and follow directions. Attention to detaTalnt
Worcester, MA • (43.1 miles) • Full Time • $110,000 to $150,000 / yr • 11/11/2026
Bearing Manufacturing Engineering Manager\n Worcester, MA | Full-Time | On-Site About the Role: \n We are seeking an experienced Bearing Manufacturing Engineering Manager to lead engineering initiatives supporting the design, development, and manufacture of precision bearing products and assemblies. This role is responsible for managing manufacturing engineering activities while driving continuous improvement in product design, manufacturing processes, quality, and operational efficiency. \n The ideal candidate combines strong technical expertise in bearing manufacturing, precision machining, and metal manufacturing processes with proven engineering leadership experience. This individual will collaborate closely with Operations, Quality, Production, and Sales to develop manufacturable soluQuest Global
Enfield, CT • (0 miles) • Full Time • $70,000 to $80,000 / yr • 11/10/2026
Quality Engineer - FAIR Enfield, CT, USA What You will Do: Primary: ReviewQuality requirementsof aero-engine components. Plan and prepare build of a regulatory based and compliant “First ArticleInspectionReport (FAIR)” supplier package for OEM acceptance. Work as per the requirements of AS9102-Rev C and associated customer procedures. Primary: “Balloon” engineer drawings (DISCUSsoftware) to capture required qualityinspectionpoints. Determine/verify proper gaging equipment to use it to perform inspections – a part of the FAIR package.Inspectionwill include both dimensional and visual reviews using both manual and advanced gages / equipment.Inspectiontools must be verified for calibration and proper functionality before used. Create or gather and verify all other quality supporting documentsBarnes Group Inc.
East Granby, CT 06026 • (10 miles) • Full Time • 11/10/2026
The Quality Engineer role at East Granby, CRO is responsible for planning and executing actives related to the development, application, and maintenance of quality standards and activities for customer processes, materials, and products to assure that customer expectations are met or exceeded while maintaining while optimizing cost and operational performance. Core Responsibilities: Assists in formulating and maintaining quality assurance plans and objectives. Formulates and coordinates product quality standards and objectives with production procedures to obtain the most economically optimal product quality and reliability. Investigates and responds to customer complaints regarding product quality. Reviews RFQs, identifying special quality considerations. Reviews and makes recommendationsMB Aerospace East Granby
East Granby, CT 06026 • (10 miles) • Full Time • 11/10/2026
Barnes Aerospace, East Granby, CT OEM has an exciting opportunity for a Quality Engineer. The qualified individual would be responsible for planning and directing activities concerned with the development, application, and maintenance of quality standards and activities for industrial processes, materials, and products to assure that customer expectations are met or exceeded while maintaining an acceptable cost level. Core Responsibilities: Compile and submit packages for customer approval (FAI, SPS, ESA, PPAP, etc.) Develop and maintain systems to provide quality control, quality assurance and process control systems to support internal and external (customer) requirements Train employees, as required, in various quality control, SPC, quality assurance, auditing and the use of required doConnecticut Spring & Stamping
Farmington, CT 06032 • (22.8 miles) • Full Time • $80,000 to $110,000 / yr • 11/10/2026
Job Title Process & Estimating Engineer Job Number 17-3029.06 Department Coiling and Secondary Reports to Spring Manufacturing Manager Primary Position Objectives Develop & refine spring manufacturing processes and procedures in order to assure quality control and consistency in manufacturing. Responsible for contract review & assisting in cost estimating on new product. Position Responsibilities Estimating Provides technical information and training to production staff. Tests alternative techniques and methods; recommends changes in manufacturing processes and procedures, or equipment as necessary. Supervises installation of the most effective methods of manufacturing to keep company at competitive edge at all times in a global economy. Approves all Estimating Feedback Forms for operationFischer Technology Inc
Windsor, CT 06095 • (9.8 miles) • Full Time • 11/10/2026
Description: About us: Fischer Technology is a leading manufacturer of precision coating thickness measurement and material analysis instrumentation. For more than 70 years, we have earned a global reputation for delivering highly accurate and reliable measurement solutions. Our instruments are trusted by customers in the aerospace, automotive, electronics, medical device, durable goods, green energy, and general manufacturing industries. As part of the Helmut Fischer Group, we are committed to innovation, quality, and exceptional customer service. Our collaborative team works closely with customers to solve complex measurement challenges through advanced technology and application expertise. Position Overview Fischer Technology is seeking a motivated Field Sales Engineer to join our growiActalent
Windsor Locks, CT 06096 • (6.5 miles) • Full Time • $30.00 to $40.00 / hr • 11/10/2026
Hiring for a Manufacturing Engineer in Windsor Locks! \n Job Description \n The Manufacturing Engineer will support the production of highly sophisticated assemblies for space and sea applications, including heat exchangers, pumps, fans, and pressurized accumulators. This role focuses on driving innovation, ensuring manufacturability, and applying advanced engineering solutions to support life support and thermal control systems. You will develop and implement robust mechanical manufacturing methods, optimize complex assembly processes, and collaborate closely with cross-functional teams to deliver high-reliability aerospace and defense hardware. \n Responsibilities \n \n Develop and implement mechanical manufacturing methods for hardware, ensuring readiness for production and alignment wiAquinas Consulting
Windsor, CT 06095 • (9.8 miles) • Full Time • 11/10/2026
Aquinas Consulting is currently looking to fill a Senior Systems Engineer job in Windsor, CT. This DIRECT hire job is available with one of our key customers in the energy and defense industry. In this role, you will be responsible for serving as the technical bridge between subsea fuel cell power systems and autonomous underwater vehicle platforms, translating mission needs into fuel cell requirements and directing multidisciplinary engineering teams. In order to be successful in this position, you must have seven plus years working with multidisciplinary engineering teams, three plus years in robotics, subsea, aerospace, or defense systems, and direct experience integrating fuel cells into a larger system. Preference will be given to someone with hydrogen fuel cell, autonomous robotics,SST Direct
Windsor, CT • (9.9 miles) • Full Time • $110,000 to $130,000 / yr • 11/10/2026
DIRECT HIRE: The NPI Manufacturing Engineer is responsible for developing, implementing, optimizing, and maintaining CNC manufacturing processes that support new product introductions (NPI). This role focuses on improving production efficiency, product quality, and cost-effectiveness while ensuring processes meet engineering specifications and customer requirements. Working closely with design engineers, quality teams, machinists, and setup personnel, the engineer provides technical support throughout the manufacturing process, from initial product development and process planning through production launch and continuous improvement. Location: Windsor, CT. (onsite position) Salary Range: $110K - $130K (depending on experience) Base Schedule: M - F, 6am - 2:30pm Benefits: Listed at the bottMEI Industrial Solutions
Southbridge, MA 01550 • (27.3 miles) • Full Time • 11/10/2026
Computer Aided Design Drafter Job Function: Skilled Trade Original Date: August 28, 2026 Status: Non-Exempt Revision Date: Position Summary: The Computer Aided Design (CAD) Drafter creates accurate 2D drawings, 3D models, fabrication drawings, and technical design documentation in support of MEI’s structural steel, custom fabrication, industrial equipment, machinery, and Millwright projects. This position works closely with project leadership, Fabricators, Welders, field crews, and other operational personnel to translate project specifications, field measurements, customer requirements, and existing conditions into practical design solutions and fabrication-ready drawings. The CAD Drafter supports projects throughout the design, fabrication, and installation lifecycle by performing fieldNautilus Holdings LLC
South Windham, CT 06266 • (29.3 miles) • Full Time • $18 to $22 / yr • 11/10/2026
Engineering Intern Job Title: Engineering Intern Department: Engineering Reporting Structure: Engineering Manager FTE: Part Time Shift: 1st (First) Pay Range: $18.00 - $22.00 Benefits: Part Time Benefits; Tuition Reimbursement and Flexible Schedule. Job Pitch: We are always looking for qualified individuals to join our team at Micro Precision who pride themselves on offering excellent customer service, attention to detail, and supporting national defense in a manufacturing environment. We are currently looking for an Engineering Intern to join our team. About Micro Precision: Micro Precision is a precision manufacturing machine shop supporting national defense and homeland security customers for over 40 years. The theme of our mission, vision, and values is dedicated to protecting America,TGG Accounting
West Torrington, CT 06790 • (31.2 miles) • Full Time • $80,000 / yr • 11/10/2026
Assistant Project Manager Water & Wastewater Treatment Construction \n\n Location: Northwest Connecticut (Greater Hartford region) onsite, split between the office and active project sites \n\n Pay Rate: $80,000–$110,000 base salary, based on experience, plus an annual merit-based bonus \n\n Overview \n Our client is a self-performing general contractor specializing in water and wastewater treatment plant construction. Projects span heavy civil, industrial, and mechanical scopes, including process piping, mechanical systems, concrete, and controls, primarily for municipal owners. \n The team is experienced and low-turnover, with staff ranging from early-career professionals to industry veterans. Senior leadership is actively involved in training and developing newer team members. The envirInabia Software & Consulting Inc.
Northford, CT • (42.4 miles) • Full Time • 11/10/2026
Looking for similar to a HW engineer /Regulatory Engineer with 5-10 years of experience, with experience on FIRE regulatory compliance (UL864) and testing activities. What candidate will be doing: Design and develop robust hardware systems and circuits with built-in compliance to FIRE regulatory requirements Integrate regulatory considerations (safety, EMC/EMI, environmental, reliability) into the hardware design process Design, develop and review schematics, layouts, and BOMs with focus on regulatory compliance, reliability, and manufacturability Collaborate with certification and approval agencies such as UL, FM, CSFM, and international regulatory bodies to secure approvals for new products Develop effective compliance and certification strategies Assist in planning and setting up test cField Of Talent
Worcester, MA • (43.1 miles) • Full Time • $80,000 to $90,000 / yr • 11/9/2026
Recruiter Summary of Position \n\n Job Title: Onsite Service Engineer (Northeast). \n Location: On-Site (Dedicated Customer Site) in Devens, Massachusetts. \n Required Technical Skills: Industrial equipment troubleshooting and repair. Electrical and mechanical systems. Industrial lasers and motion control systems. Preventive maintenance and documentation. \n Required Experience: 2+ years servicing industrial equipment. Ability to read electrical schematics and engineering diagrams. Windows PC, networking, and Microsoft Office proficiency. \n Required Certifications/Licenses: Electrical Engineering Technician certification (equivalent technical training). Valid driver's license and passport. \n Preferred Technical Skills: Additive manufacturing, Metal 3D printing, MAGICS, SolidWorks. \n DesStratus Team LLC
Hartford, CT 06103 • (16.3 miles) • Full Time • $20 to $25 / yr • 11/8/2026
About Stratus Stratus® is an integrated, multi-disciplinary engineering, architecture, interior design, and consulting firm. Consistently ranking among the Top 500 Design Firms in Engineering News-Record, the firm offers a deep bench of industry experts through a highly collaborative approach, delivering innovative solutions across the full project lifecycle. Operating coast to coast, Stratus® serves clients nationwide while maintaining a strategic commitment to supporting high-growth economies and building vibrant communities that foster the professional growth of its team. Serving public- and private-sector clients, the firm is dedicated to delivering the highest-quality service wherever projects take shape. Across the Civic, Commercial, Industrial, Transportation, Education, Water ResouZeeco
Plainville, CT • (26.5 miles) • Full Time • 11/8/2026
\n Zeeco fosters a robust work environment where employees, from engineering teams to support groups, benefit from a strong culture, trained leadership, and opportunities for growth. Zeeco collaborates with the biggest names in the industry, enabling individuals to broaden their skills alongside teams of subject matter experts.\n \n \n \n \n \n Job Description: \n \n \n The Controls Engineer position will be based out of Zeeco's Tulsa or Connecticut office within the Process Technology Division. This position will be responsible for providing controls and instrumentation expertise for a variety of product related inquiries.\n \n \n \n \n \n Job Duties: \n \n \n Review of project engineering and sales packages to determine the scope of equipment Zeeco is to supply to our customer.\n \n \n RRBC Aircraft Products, Inc.
West Torrington, CT 06790 • (31.2 miles) • Full Time • 11/8/2026
The Manufacturing Engineer is responsible for the design of production tools and /or machines and for developing solutions to support the bearing manufacturing process. A major responsibility is to improve existing manufacturing processes by increasing machine capability while at the same time maintaining quality standards. This individual will also have responsibility for floor layouts as well as costing and obtaining quotes. The incumbent is responsible for supporting new programs by developing new processes, designing tooling and machinery and developing production controls. Additionally, the Precision Manufacturing Engineer sets up new equipment, ensures satisfactory operation of the new equipment and teaches others to use it properly. Principle Responsibilities Develops and improves pAero Gear
Windsor, CT 06095 • (9.8 miles) • Full Time • $70,000 to $100,000 / yr • 11/7/2026
Quality Engineer The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM's such as Pratt& Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The primary purpose of this position is to plan and conduct activities concerned with the quality control and quality assurance of industrial processes, materials and products. Work with customers to ensure timely submittal and approval of flow doKinetic Engine Systems
Southwick, MA 01077 • (12.5 miles) • Full Time • $42.00 to $48.00 / hr • 11/7/2026
Job Position Summary: You will be responsible for designing and creating economical custom manufacturing fixtures. Reviews product design, processes and build requirements to determine tooling concepts, design options, and testing plans. Also, responsible for managing the design and the creation process for fixtures as required. I.E. Machining, Pressure testing, Assembly, and Inspection holding fixtures, in accordance with customer blueprints, 3D models, and internal operation sheets You must have: A high School Diploma orGED required Associate degree or higher in related field or relative time in manufacturing Typically, 3 to 8+ years of mechanical or tooling design experience within aerospace, or high-precision manufacturing A thorough understanding of Machine capabilities and techniquesKBE Building Corp
Farmington, CT 06032 • (22.8 miles) • Full Time • 11/7/2026
KBE Building Corporation: Relationships Are Everything! Join our team today!! \n\n KBE’s relationship focus means that you can count on us to do the right thing at all times and work in the best interests of your project. We will be proactive and open in all of our communications and interactions with all members of your project team. Our clients, design partners, and trade contractors say they trust KBE to do the right thing because we build relationships first, buildings second. \n\n CURRENT OPPORTUNITY: \n Timeframe : End of May 2027 to Mid August 2027 \n\n The Project Engineer will assist the Project Manager with the day-to-day construction, technical and administrative aspects of assigned construction projects. Primarily in the office, assignments may be generated from several in-housBOLD
Springfield, MA 01103 • (8.5 miles) • Full Time • $50.00 to $55.00 / day • 11/7/2026
Job Description: \n Strong Data Testing experience including data cleansing, comparison, validation, reconciliation, and business-rule testing. \n Expert-level SQL skills with strong hands-on experience writing complex queries for data validation. \n Hands-on AWS experience with AWS Glue, Lambda, and S3. \n Some hands-on experience with Playwright automation. \n Good understanding of ETL testing and data pipelines; moderate experience is acceptable. \n Candidates must be local to Fort Mill, SC or Charlotte, NC, or willing to work onsite in the client office at least 2 weeks per month.