New Castle, DE 19720 • (43.7 miles) • Full Time • 9/17/2026

Field Service Technician – Industrial Woodworking MachineryCompany: Felder Group USA Location:New Castle, DE Schedule: Full-time | Monday–Friday (occasional weekends as needed) | 8:00 AM–5:00 PM (field hours may vary) Work Type: In-office and field-based Compensation Hourly pay starting at $25/hr, with higher compensation available based on experience and technical background. Additional earning potential through: Overtime opportunitiesPer diem for field assignmentsPerformance incentivesPaid travel time at full hourly rateAbout the Role Felder Group USA is seeking a Field Service Technician to install, troubleshoot, and repair industrial woodworking machinery across the greater Delaware area and surrounding regions. This role combines mechanical and electrical troubleshooting with independ

Newark, DE 19702 • (42.9 miles) • Full Time • 9/17/2026

Environmental Engineer (Mid-Level Project Manager)Job DescriptionThis mid-level Environmental Engineer position focuses on managing and supporting Phase I and Phase II environmental site assessment and remediation projects based out of offices in Milton and Newark, Delaware. The role combines project management, technical environmental engineering and geology work, and field oversight on government-funded remediation and compliance projects, including brownfield and Superfund sites under state and federal programs.ResponsibilitiesLead and assist in managing Phase I and Phase II environmental site assessment and remediation projects across Delaware, serving as a mid-level project manager.Manage and direct site evaluations under Delaware HSCA and Brownfields programs, as well as EPA Region I

Dover, DE 19904 • (11.1 miles) • Full Time • 9/16/2026

Basic Function: Develops design and technical solutions along, with preparation of engineering analysis and calculations for private improvements and public works projects.Essential Duties/Responsibilities included but not limited to: Perform research and obtain standards/codes required by client and jurisdictionAbility to design partial to complete projects, systems, components, or processes and prepare complete project documentsProvide cost estimates for materials, equipment, or labor to determine a project’s economic feasibilityReview, evaluate, and verify for accuracy and viability of designs, data, reports, and other documents before submitting themAssume responsibility for the quality of work submittedMay have some responsibility for project management, delegation and of duties, and

Dover, DE 19904 • (11.1 miles) • Full Time • 9/16/2026

We're hiring a Mechanical Engineer to support and improve equipment across our production floor. You'll work directly with our operations team to keep production lines running reliably, troubleshoot mechanical issues, and drive continuous improvement projects from encapsulation and tableting equipment to packaging and bottling lines.Qualifications:Strong Mechanical Engineering foundation with practical experience in nutraceutical manufacturing or industrial environments,Familiar with the process of encapsulations process and the properties of different raw materials.Provide mechanical engineering support across production line equipment, including troubleshooting, root-cause analysis, and preventive maintenance planningWork with operators and maintenance technicians to resolve equipment do

Dover, DE 19901 • (12.3 miles) • Full Time • 9/16/2026

We offer a starting salary of $18.00/hr. with NO experience and are serious about starting a new career! Already a seasoned technician? Rates will commensurate with experience.WHO IS HILLIS-CARNES?Hillis-Carnes Engineering Associates (HCEA) is a top-tier, multi-disciplined engineering firm with 30 years of demonstrated success (and counting!) Just ask Engineering News-Record who named us to its ranking of "Top 500 Design Firms in the Nation" for our continued rapid growth and success. HCEA strongly believes in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement.WHY HILLIS-CARNES?Through our ESOP (Employee Stock Option Program), you receive ownership stock in the company!Competitive pay.Paid on-the-job training.Generous Paid Time Off/Holidays/Flo

New Castle, DE 19721 • (45 miles) • Full Time • 9/15/2026

First Assistant Engineer Job Summary We are seeking an experienced First Assistant Engineer to support the safe, reliable, and efficient operation of passenger vessels based in Cape May, New Jersey. In this role, you will oversee vessel machinery and equipment operations, stand engine room watches, maintain accurate engineering logs, identify and report mechanical issues, and assist with maintenance and repairs while underway. This position reports to the Chief Engineer for engine room responsibilities and supports shoreside engineering and shipyard activities as needed.ResponsibilitiesStand engine room watches and monitor machinery, equipment, temperatures, pressures, and operating conditions.Maintain accurate engine room logbook entries.Identify machinery abnormalities and immediately re

Clayton, DE 19938 • (18.1 miles) • Full Time • 9/15/2026

About Company:Eagle Group is a Great Place to Work Certified (May 2022 - 2026) manufacturer located in Clayton, Delaware. We are America's largest broadline manufacturer of commercial foodservice equipment and a leading maker of material handling, storage, and transport systems for various industries, including healthcare and cleanroom technology.With a history of over 70 years, we are committed to investing in our employees and maintaining a safe, OSHA-recognized workplace. Our focus on stability and growth is demonstrated by our average length of employment being triple the national average. We offer comprehensive benefits, a tiered employment strategy for professional development, and a rewards program to celebrate employee dedication.About the Role:The Design Engineer plays a critical

New Castle, DE 19720 • (43.7 miles) • Full Time • 9/15/2026

Benefits:Competitive salaryDental insuranceDonation matchingHealth insurancePaid time offVision insuranceWellness resourcesLEAD FABRICATOR / CNC Vertical Mill Programmer Custom manufacturing company located in New Castle, DE, is seeking a well-rounded HANDS-ON Lead Fabricator to head up our CNC Department. Candidate will be responsible for manipulation of g & m codes at machines, experience with MasterCam, setting up and operating CNC Vertical Mills (Haas VF-10, VF-4, VF-3 & Fadal) and fabrication of custom steel, aluminum and wood products. Full time day shift position. Attractive salary and benefits package. Duties and Responsibilities: • CNC programming, set up & operation of CNC Vertical Mills for standard & custom parts • Set-up and break-down of machining centers as well as schedulin

New Castle, DE 19720 • (43.7 miles) • Full Time • 9/15/2026

Job Title: Electrical, Instrumentation & Controls Engineer Location: New Castle, Delaware Type: Direct Hire Compensation: $95000 - $125000 annually Contractor Work Model: Onsite Job Summary: The Electrical, Instrumentation & Controls Engineer is responsible for developing, planning, and managing plant capital projects particularly as they relate to electrical, instrumentation and controls of chemical processes. This position will be a technical resource for the entire engineering team and plant maintenance staff as it relates to the troubleshooting of process electrical, instrumentation and controls problems. All work associated with the position must be administered within the confines of Process Safety Management initiatives. This position will interact with all levels of company employe

Vineland, NJ • (44 miles) • Full Time • 9/15/2026

Junior Building Automation Controls EngineerPosition SummaryWe are seeking a motivated and technically capable Junior Building Automation Controls Engineer to provide on-site support for a large commercial building environment. This role is ideal for candidates with 1 to 5 years of experience in Building Automation Systems (BAS), HVAC controls, or facility controls engineering who are looking to expand their technical expertise while contributing to critical building operations and special projects.The Junior Building Automation Controls Engineer will serve as an on-site technical resource, supporting daily building operations, assisting with troubleshooting and maintenance of automation systems, and participating in capital improvement and special project initiatives. This position is cri

Elkton, MD 21921 • (45 miles) • Full Time • 9/15/2026

WORK SHIFT: 1st Shift (9/80A) - 8am-5pmThis position is for a Systems Engineer within the Propulsion Systems and Controls Business Unit. The selected candidate will support the development of a propulsion system through Critical Design Review (CDR). The role will span two programs and include supporting the lead systems engineer, with the ability to assume that role as needed. The candidate will apply systems thinking to help the program team plan, coordinate, and execute technical deliverables. Experience with legacy system design and requirements is preferred.Contract is formally through the end of 2026, but is expected to proceed into 2027 pending milestone success.Job ResponsibilitiesProvide technical leadership and coordination between engineering disciplines, program management, and

Newark, DE 19702 • (42.9 miles) • Full Time • 9/9/2026

Wilmington PharmaTech (WPT) is looking for a Process / Production Engineer with cGMP experience in the pharmaceutical industry to work in the Newark, DE area. The nature of this position is supporting the manufacturing team that creates drug products by working closely with supervisors, GMP operators, maintenance technicians and QA colleagues. Ideal candidates should have a strong understanding of Good Manufacturing Practices (GMP) and new product development projects, and pharmaceutical/ chemical manufacturing. The position is set in a fast-paced start-up environment and shall require the individual to work on a broad range of tasks. A qualified applicant should have the skills or previous knowledge of the below tasks:Configure plant equipment, such as reactors, pumps and filters for proc

New Castle, DE 19720 • (43.7 miles) • Full Time • 9/8/2026

Description: ModernControls is a leading provider of HVAC and building automation services for commercial facilities across Delaware, Pennsylvania, Maryland, and New Jersey. With over 100 employees, and a fleet of 70 service vehicles, our team of experts install, maintain, and design Building Automation and HVAC systems designed to help facility managers control building environments and operating costs.About the Building Automation Programmer position: We are looking for a Building Automation Programmer to join our growing company. In this role you will be a key member of our business automation team and work directly with the facility team, architects, and engineers to design, review, and implement building automation projects for our commercial customers. We are looking for career-minde

Smyrna, DE 19977 • (19.7 miles) • Full Time • 9/4/2026

MUST MEET ALL MINIMUM QUALIFUICATIONS* (Please do not apply if not qualified)Job Responsibilities of Construction Inspectors Level I, II and III:Must have vehicle and be willing and able to travel to various work sitesCompiles and records notes, sketches, test results, inspection data and other information to document compliance and/or develop designs, specifications, reports, maps and other geographically based data. Performs daily field inspections and maintains inspection records.Effectively follow and rely on instructions and pre-established guidelines to perform the functions of the job.Calculates/measures area and volume dimensions, horizontal and vertical geometry, profile and component specifications, and material testing dimensions using calculators or computers.Able to apply ana

Wildwood, NJ 08260 • (39.5 miles) • Full Time • 9/4/2026

POSITION SUMMARY:The Engineering Technician is an entry-level professional with 1-2 years of experience. This individual will provide engineering services on all phases of an assigned project under the supervision of the Regional Manager, or Project Manager PRIMARY DUTIES:Design and prepare plans for site development, roadway, utility, stormwater, and other civil infrastructure projectsPerform site grading, drainage, and erosion control design in compliance with local, state, and federal regulationsConduct technical analyses, calculations, and cost estimatesPrepare and submit permit applications and coordinate with regulatory agenciesCollaborate with project managers, architects, surveyors, and other engineers to ensure project objectives and deadlines are metReview construction plans and

Dover, DE • (10.7 miles) • Full Time • 9/4/2026

Company Description At Check Point, what you do matters. Every day, we protect over 100,000 organizations worldwide from increasingly sophisticated cyber and AI-driven threats, securing their AI transformation. Our prevention-first approach safeguards hybrid networks, cloud environments, digital workspaces, and AI systems, stopping attacks before they happen. This is where innovation meets real-world impact. You’ll help customers across industries operate with confidence in a rapidly changing digital world, working alongside smart, curious people who take ownership, challenge assumptions, and solve complex problems. We’re proud to be recognized by TIME, Newsweek, and Forbes for excellence and workplace culture. What really sets Check Point apart is the opportunity to grow, contribute, and

New Castle, DE 19720 • (43.7 miles) • Full Time • 9/3/2026

Description: Zenith Home Corp. is currently recruiting for a Product Development / Manufacturing Engineer. Zenith is a well established, medium sized company located in New Castle, Delaware, which is within commuting distance from Maryland, Pennsylvania and Southern New Jersey. Our company manufactures consumer products found in most major retail stores such as shower curtain rods, liners and rings, as well as mirrored medicine cabinets, shower caddies, and wood, wire, and plastic shelving and storage cabinets.Position ScopeZenith is looking for a mechanical or industrial engineer to be an integral part of its product development and manufacturing engineering team. This person will be responsible for the development of new products from initial conception through final production and assem

North East, MD 21901 • (44.6 miles) • Full Time • 9/2/2026

About Company:Challenge. Transform. Empower. “Challenge people through transformative educational and retreat experiences to realize their attitudes and actions have a lasting impact on their lives, communities, and the environment.”Founded in 2005 on the shores of the Chesapeake Bay, NorthBay is a 501(c)(3) nonprofit organization that creates transformative experiences that help people grow and lead with purpose. Each year, we serve over 20,000 middle school students through overnight and in-school environmental education and character development programs and have reached more than 300,000 students across the Mid-Atlantic. Through our rentals program, we also welcome thousands of organizations annually, expanding our impact through retreats and community-building.About the Role:NorthBay

Magnolia, DE 19962 • (5.8 miles) • Full Time • 9/2/2026

Job Description TALINO Engineer (Builder)Department: SUMURI EngineeringReports To: Engineering LeadFLSA Status: Non-ExemptPosition Summary The TALINO Engineer (Builder) is responsible for assembling high-performance computer workstations with precision, efficiency, and attention to detail. This role requires strong organizational skills, the ability to follow detailed instructions, and a commitment to maintaining SUMURI’s high standards of quality. While prior experience is not required, the position offers opportunities for training and skill development in areas such as operating system installation, troubleshooting, and peer collaboration.In addition to workstation assembly, the TALINO Builder supports the SUMURI lab, shipping and receiving operations, ensures accurate documentation of

New Castle, DE 19720 • (43.7 miles) • Full Time • 9/2/2026

Our mission is simple: we want to partner with you to find the right position for your future. Our SWAT team approach is based on our ability to align your expertise with our clients’ needs to forge long-lasting partnerships.Gr8ttek is looking for a part-time Field Specialist to join its Infrastructure Delivery team. Reporting to the Territory Supervisor the Field Specialist will perform a variety of hardware-focused, break fix services and solutions on various client products. Candidates must possess the ability to perform basic and moderately complex troubleshooting and repair activities. Position may require the exercise of moderately complex analytical skills and to make decisions based on established department and company guidelines.**You will need to be available to take calls M-F b

Cape May Court House, NJ 08204 • (35.3 miles) • Full Time • 9/1/2026

Engineering Technician An Engineering Technician is a professional with 0 - 3 years engineering experience. This position will be responsible to work with a team of engineers for the design and production of construction documents for building facilities of various uses and construction materials, including replacement or rehabilitation for structures. This position will also conduct inspections of existing building facilities, including report preparation. PRIMARY DUTIES: • Application of structural engineering and detailing techniques associated with the development of building design and rehabilitation plans. • Conducts analyses to develop design options or recommendations and assists in the preparation of cost estimates and specifications. • Performs routine engineering assignments req

Dover, DE 19901 • (12.3 miles) • Full Time • 8/28/2026

This job is Hybrid in Dover, DE Our direct client has an opening for a Network Engineer 1459 This position is for 24 months, with the option of extension, and is in Dover, DEWe can work corp to corp or w2. If you are interested, please submit the following:YOUR CURRENT RESUME YOUR HOURLY RATE This will be an evolving position that will change as our new technologies are implemented within our Enterprise Voice/Networking team. Qualified candidates Must have the following experience: Experience performing Add/Move/Changes (MACD’s) within Cisco Call Manager (CUCM) which provides enterprise voice services for over 15000 State of Delaware Employees across the enterprise. Experience with (MACD’s) Cisco Unity Voicemail.Experience troubleshooting and resolving complex enterprise VOIP issues on Cis

Dover, DE 19901 • (12.3 miles) • Full Time • 8/28/2026

Benefits:Flexible scheduleOpportunity for advancementProfit sharingThis Is Not Your Average Tech Job Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job ResponsibilitiesPerform a wide range of technical tasks including but not limited to: OS installations, hardware diagnostics, and software setupStru

New Castle, DE 19720 • (43.7 miles) • Full Time • 8/27/2026

Description: SummaryThis position is responsible for executing field assignments within the Company’s four service lines: Remediation, Waste Transportation, Industrial Maintenance, and Emergency Response while ensuring Lewis Environmental, Inc. Core Values: Safety, Accountability, Integrity and Quality are instilled in everything we do and lead by example.Expectations/ResponsibilitiesFollow direction of supervisors to perform assigned tasks. Practice safe work Practices by following all Company safety rules and OSHA regulations, including attendance at all required safety training programs. Perform a wide variety of manual labor tasks. Perform Industrial Cleaning tasks in accordance with Company and/or Client Policy and Procedures to ensure safety and quality goals are met. Travel daily an

Dover, DE • (10.7 miles) • Full Time • 8/26/2026

We understand that healthcare careers are more than jobsthey are a calling.At Transformational Health Network, Inc. (TrHN), we partner with respected healthcare organizations to place highly skilled registered nurses, advanced practice providers, and physicians in roles where they can make a meaningful impact on patient care.Our mission is to help healthcare professionals find positions that offer growth, flexibility, competitive compensation, and supportive clinical environments.Software Engineer 3 Government (Fort Meade Columbia, MD area)US Citizen / Greencard or EAD ONLYSoftware Engineer to support the Cybersecurity Intelligence Team (CIT) TTO which provides normalization of cyber security data and automation of threat intelligence. The candidate will support CIT TTO in updating and mai

Newark, DE 19702 • (42.9 miles) • Full Time • 8/26/2026

Job Title: Manufacturing Engineer (ME)Department: OperationsLocation: 110 Lake Dr, Newark, DE 19702Reports to: Production Manager or Vice President of Operations & QualityPosition Summary:The successful applicant for this position must have a bachelor’s degree in engineering in the field with chemical, mechanical, electrical, or industrial with minimum of 5-10 years’ experience in electro-mechanical, automated equipment, PLC, and/or hands on experience. Also required is 2 years’ leadership experience with electrical, plumbing and/or HVAC systems. Must be able to transport (safely carry objects/materials within same facility/location) up to 50 lbs., operate shop equipment, power tools, and hand tools. Further requirements include ability to: read and understand technical instructions and ma

New Castle, DE 19720 • (43.7 miles) • Full Time • 8/25/2026

Job Title: Electrical, Instrumentation & Controls EngineerClassification: Full Time, Salary, ExemptDepartment: EngineeringLocation: New Castle, DEDirect Supervisor: Director of EngineeringJob Summary: The Electrical, Instrumentation & Controls Engineer is responsible for developing, planning, and managing plant capital projects particularly as they relate to electrical, instrumentation and controls of chemical processes. This position will be a technical resource for the entire engineering team and plant maintenance staff as it relates to the troubleshooting of process electrical, instrumentation and controls problems. All work associated with the position must be administered within the confines of Process Safety Management initiatives. This position will interact with all levels of compa

Middletown, DE 19709 • (33.4 miles) • Full Time • 8/24/2026

Description: The Field Technician is responsible for mitigating water, fire and mold damage in residential, commercial and institutional structures and documenting site conditions, progress and results directly to the customer, insurance representative and the mitigation manager at Paul Davis Restoration of Northern Delaware (NTDE). The technician will serve in an on-call capacity during scheduled intervals and is expected to be on call during “cat” (catastrophe) circumstances when widespread damage is created by extreme weather conditions.The primary role is mitigation and cleaning of damaged properties on initial response using industry standard processes (IICRC). Maintaining excellent communication with the property owner/management and the mitigation manager. Maintaining and recording

Dover, DE • (10.7 miles) • Full Time • 8/22/2026

IQ Fiber was built to do internet differently. We're a 100% fiber-optic internet provider with a simple mission: To engineer a smarter internet experience. That means internet that's fast, reliable, and simply priced, backed by real humans who answer when you call and solve problems before you know they exist. We bring that same thinking to how we build our company. Our teammates are a big part of what makes IQ Fiber different, and we believe how we work matters just as much as what we deliver. We're looking for good humans who bring great ideas, raise the bar with every task, and want to be part of a bigger story. Your work matters here.Position SummaryThe Outside Plant Engineer is a hands-on field engineering role responsible for supporting the activation, maintenance, and troubleshootin

Felton, DE 19943 • (1.7 miles) • Full Time • 8/21/2026

DSWA is accepting applications to fill a full time Wellfield Technician position at the Central Solid Waste Management Center located in Felton,DE. Applications will be accepted until the position is filled. The position includes a full benefit package including State of DE Pension, medical, dental, vision, life insurance, and other benefits.This is a safety sensitive position that requires drug and alcohol testing.Minimum Starting Payrate: $18.34 per hourESSENTIAL TASKS:Essential functions are fundamental, core functions common to all positions in the class series and are not intended to be an exhaustive list of all job duties for any one position in the class. Since class specifications are descriptive and not restrictive, incumbents can complete job duties of similar kind not specifical

New Castle, DE 19720 • (43.7 miles) • Full Time • 8/20/2026

Position Summary:MRI Field Service Engineers will travel and execute all required service requests, including repairs, planned maintenance, equipment de-installations and installations. Must have the ability to troubleshoot and accurately resolve technical issues with the use of laptop and other equipment. Must be familiar with MRI medical equipment. OEM or third party training/experience preferred. Must have Siemens MRI.Location: Manasquan, NJ but must be willing to travel at least 50% current locationEssential Duties:Provide on-demand phone and on-site support as required.Plan, schedule, and execute all required planned maintenance (PM) activities.Accurately and promptly submit required paperwork to accounting/operations.Promote positive customer relationships, including non-service call

Seaford, DE • (24.9 miles) • Full Time • 9/17/2026

Mechanical Engineer We are seeking a highly skilled and detail-oriented Mechanical Engineer with extensive experience in AutoCAD with piping design and engineering. Responsible for creating and modifying technical drawings using AutoCAD software. You will collaborate with cross-functional teams to ensure the accurate representation of engineering designs and specifications. This role requires a strong understanding of engineering principles, excellent CAD skills, and a keen eye for detail.Responsibilities:Piping Design and Engineering: Utilize AutoCAD software to develop detailed piping designs, layouts, and 2D/3D models based on project requirements, engineering calculations, and specifications.Drafting and Documentation: Create, modify, and maintain technical drawings, blueprints, and sc

Aberdeen Proving Ground, MD 21005 • (43.2 miles) • Full Time • 9/16/2026

Position Summary: Sigmatech, Inc. is seeking a highly skilled Software Engineer to join our team at Aberdeen Proving Ground, MD. In this role, you will support one of our Army customers in the development, integration, and sustainment of advanced tactical radio and military communications technologies. We are looking for a mission?focused engineer who thrives in a collaborative environment and brings strong technical leadership to complex software challenges.Key Responsibilities:Design, develop, test, and integrate advanced software solutions for Army tactical radios and communications systems.Provide technical leadership and subject matter expertise in developing secure, robust, and scalable software architectures.Collaborate with Program Managers, systems engineers, and SETA team members

Bridgeville, DE • (19.9 miles) • Full Time • 9/16/2026

JOB SUMMARY: The Engineering Designer provides conceptual and flow designs, detail designsand drafting, standardization and quality improvement strategies for the department. Equally important theEngineering Designer must serve as a critical interface with manufacturing for quality fabrication andinstallation of designed systems, helping to reduce the overall cost of operations.SITUATION:OA Newton designs and produces material handling systems using mechanical or pneumatic conveyingfor movement of bulk material such as PVC, wood flour, grain, and carbon black, serving the buildingproducts, friction products, and agri-business industries.JOB DUTIES:1) Revise, or create ACAD / Solidworks drawings per verbal or written direction from supervisor withefficiency and accuracy.2) Maintain engineer

Aberdeen Proving Ground, MD 21005 • (43.2 miles) • Full Time • 9/16/2026

Description: Founded in 2009, RSC2, Inc. is a Small Business Administration (SBA) Certified HUBZone Professional Services company headquartered in Baltimore, Maryland. RSC2 provides breakthrough expertise, support services, and technologies to make operations, programs and systems of record perform better. Our professional staff is trained to provide world-class services to all types of customers. We uphold the integrity and quality of our work so you can expect only the best from us.We are seeking a Principal Radar Engineer to join our forward-thinking engineering team. This position will be critical in defining radar system architectures, designing radar processing algorithms, and supporting integration into counter-defensive systems. The ideal candidate will have the technical expertise

Aberdeen Proving Ground, MD • (43.2 miles) • Full Time • 9/15/2026

Location:Aberdeen, MDJob Type:Full-Time (in-person)About mcfa:We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through aligning their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development".mcfa Core Values (LEADS):Love (each other, mission, work)Entrepreneurial (spirit of innovation)Accountability (to ourselves, our clients, each other)Delight (customers and teammates)Stretch (individual and collective growth mindset)How you'

Milford, DE • (10.9 miles) • Full Time • 9/15/2026

The Senior Engineer, Infrastructure position is core to the implementation and support of all infrastructure including servers, storage, email, telecom, backup, and data centers both on premise and external, network, servers both physical and virtual, storage, firewalls, email, security, mobile devices, back-ups, business continuity / disaster recovery, operations automation, and documentation. The Senior Engineer, Infrastructure will work with Technology Services senior staff and leadership in the identification of technology needs, design of solutions, vendor management, the project life cycle for the installation of new and upgrading of existing technology, development of better practices around security, policy and procedures, quality assurance, monitoring, metrics, and documentation.T

Easton, MD 21601-3150 • (31.2 miles) • Full Time • 9/15/2026

POSITION: JuniorElectrical EngineerREPORTS TO:Electric Department ManagerJOB OBJECTIVE:Design, plan, coordinate, and support electrical utility infrastructure projects that enhance the reliability, safety, and efficiency of Easton Utilities' electric system. Provide engineering support for power generation, transmission, distribution, substations, and control systems through the design, analysis, testing, and implementation of new and existing electrical facilities. Prepare technical specifications and engineering documentation, support capital improvement projects, and assist with system maintenance and emergency restoration efforts.This is a full-time, exempt position.EDUCATION REQUIREMENTS:Bachelor's degree in Electrical Engineering from an ABET-accredited university.JOB REQUIREMENTS:On

Aberdeen Proving Ground, MD • (43.2 miles) • Full Time • 9/15/2026

Position Title: Principal Radio Frequency Engineer Location: Onsite at Aberdeen Proving Grounds Clearance Requirement: Top Secret / With SCI eligibility Employment type: Full Time Research Innovations, Inc. (RII) is breaking through the big, slow status quo with transformative technology that fundamentally improves the world. We build advanced software solutions for government and military missions, applying agile development and user-centered design to solve complex, mission-critical problems. We are seeking a highly driven Principal RF Engineer to join our EW/SIGINT team supporting Defense and Intelligence Community missions. In this role, you will solve complex, mission-critical challenges and develop advanced RF collection capabilities that enable real-time situational awareness in dyn

Aberdeen Proving Ground, MD • (43.2 miles) • Full Time • 9/15/2026

Join a team where innovation meets mission. Our AI, cloud, cyber, and modernization solutions save agencies thousands of hours, safeguard national security, and strengthen health and humanitarian missions worldwide. With more than 1,700+ team members, 1,500+ AI & data experts, and 100+ prime contracts, we deliver on a scale and with purpose.We’ve been recognized as a Top Workplace by The Washington Post for six consecutive years and named to the Inc. 5000 list of Fastest-Growing Private Companies in 13 of the past 14 years. Credence is a welcoming environment for those looking to grow and make a meaningful impact. We encourage employees to push boundaries and help solve critical, world-changing federal challenges.Credence has an immediate need for a Systems Engineer to perform systems engi

Aberdeen Proving Ground, MD 21005 • (43.2 miles) • Full Time • 9/15/2026

Description:On-site in Aberdeen Proving Ground, MDOur client seeks an Agentic AI, AI & Data Science Engineer to develop mission-focused AI/ML solutions, automation workflows, analytics capabilities, and agent-based systems that support Army readiness, decision advantage, and modernization. This practitioner role partners closely with government personnel to deliver solutions while enabling knowledge transfer, documentation, and sustainable adoption.Due to federal security clearance requirements, applicant must be a United States Citizen with an active Secret clearance. This is a contract to hire opportunity. Applicants must be willing and able to work on a w2 basis and convert to FTE following contract duration. For our w2 consultants, we offer a great benefits package that includes Medica