DeLand, FL • (24.3 miles) • Full Time • 10/24/2026

Agricultural Small Engine Technicians needed for busy tractor store. Lots of work, plenty of hours, great pay, many benefits, and a great schedule! Must have apositive attitude and be eager to learn! What we offer: Competitive pay based on experience ($18-$35 per hour) Medical Insurance Dental Insurance Life and Disability Insurance 401K Plan Holiday Pay Get paid weekly 5 Day work week (Schedule flexibility) Family-owned & operated Growth opportunities Responsibilities: Perform work specified on the repair order with efficiency and in accordance with the dealership. Test components and systems, using diagnostic tools and special service equipment. Diagnose, maintain, and repair agriculture equipment Communicate directly with the Service Manager so that customers are informed if any additio

Longwood, FL • (31.1 miles) • Full Time • $15.00 to $18.00 / hr • 10/24/2026

Wire Harness Assembler | $15.00 to $ 18 per hour (depending on experience) What Matters Most: Schedule:Mon-Thurs 7am-4pm; Friday 7am-1pm Location: Longwood, FL Temporary-to-hire opportunity with career growth and stability Weekly pay with direct deposit or pay card When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus program. Job Description: As aSmall Components Assembler, you will build wire harness assemblies according to diagrams, technical drawings, and customer specifications. You will prepare and process wires through routing, heat shrinking, stripping, crimping, connector installation, and potting. This hands-on role requires electronic and mechanical aptitude, accurate

Orlando, FL 32804 • (38.4 miles) • Full Time • 10/24/2026

Key Responsibilities: Prepare and mix spray foam material daily according to specifications. Perform thickness checks during application to ensure the required material thickness is achieved. Set up and operate mixing and spraying equipment. Monitor machine performance and make adjustments as needed. Keep materials organized and maintain a clean work area. Assist with troubleshooting and minor equipment maintenance. Travel to job sites across the state of Florida. Qualifications: Experience with fireproofing materials and mixing processes. Must complete a respiratory and fit test, provided by Alpha, after spraying begins safety is our top priority. Knowledge of equipment setup and operation, with strong attention to detail and commitment to quality control. Ability to work in a physically

Orlando, FL 32805 • (40.9 miles) • Full Time • $18.00 / hr • 10/24/2026

Salary: $18 per hour + none Reference: 1180924-2 Ready to expand your skill set in your next job opportunity? Hands-on machine operator helpers who have a keen eye for detail are highly in demand these days, which is great news for you. Why? Because it means we're hiring (and training) dependable workers for entry-level positions in your area no previous experience required. In return, you'll take home great weekly pay, work a steady schedule and learn as you go. If that sounds like your next career opportunity, read the rest of the job description and be sure to apply. We'll coordinate online interviews with qualified candidates shortly. location: Orlando, FL work hours: 07:00 AM - 03:30 PM dress code: Shirts or t-shirts must have sleeves and be without any holes or rips. Pants without an

Orlando, FL • (40.6 miles) • Full Time • $17.00 to $20.00 / hr • 10/23/2026

Electromechanical Assembly & Installation Technician About Corserva, Inc. At Corserva, we specialize in delivering comprehensive IT solutions, including managed services, cloud computing, and technology deployment solutions tailored to enterprise and mid-market clients. Job Description The Electromechanical Assembly & Installation Technician is a hands-on position focused primarily on the assembly, setup, testing, preparation, and deployment of electronic access-control products . The technician will work as part of our production and technical team assembling electronic locks and related components, installing PCB boards and wiring, configuring devices, performing basic testing, and preparing completed products for customer installations. This is an excellent opportunity for someone who i

Orlando, FL 32828 • (31.6 miles) • Part Time • $18.00 to $25.00 / hr • 10/23/2026

Bowling Technician Location: Launch Entertainment Park – Orlando, FL Position Type: Full-Time Join Our Team Launch Entertainment Park is seeking an experienced Bowling Mechanic to maintain, repair, and optimize our string bowling equipment. The ideal candidate is mechanically inclined, dependable, and has hands-on experience servicing string pinsetter systems. This position plays a critical role in ensuring our guests enjoy a safe, reliable, and high-quality bowling experience. Key Responsibilities Perform preventative maintenance on all string bowling pinsetter equipment. Diagnose and repair mechanical and electrical issues with bowling machines. Troubleshoot pinsetter malfunctions and restore equipment to operational status quickly. Inspect lanes, approaches, ball returns, scoring system

Maitland, FL 32751 • (34.5 miles) • Full Time • $80,000 to $115,000 / yr • 10/23/2026

Senior Project Manager – Commercial Mechanical Construction COR3 Mechanical, LLC | Central Florida COR3 Mechanical is a fast growing commercial mechanical contractor specializing in HVAC, chilled water systems, and ductwork for educational and institutional facilities, with an expanding focus on healthcare construction. We are seeking an experienced, technology-savvy Senior Project Manager who can independently plan, budget, coordinate, and execute multiple complex projects in a fast-paced environment while maintaining strong customer relationships and delivering profitable results. Key Responsibilities Develop and execute project plans, budgets, schedules, manpower forecasts, and procurement strategies. Manage project financial performance, including job costing, labor productivity, forec

Orlando, FL • (40.6 miles) • Full Time • 10/23/2026

Industrial Maintenance Technician | $ 35 - 40.00 per hour | 3 rd shift / Direct Hire What Matters Most : Competitive Pay of $35 - $40.00 per hour Schedule:3rd shift Location:Orlando, FL Direct-hireopportunitywith career growth and stability Keep production moving. Own the equipment. Make an impact. Our client,a commercial bakery manufacturer, islooking for a skilled Industrial Maintenance Mechanic to join a high-performing bakery production team. In this role, you won’t just fix equipmentyou’ll be a critical part of keeping operations running safely, efficiently, and without interruption. If you thrive in a fast-paced manufacturing environment and enjoy diagnosing complex issues, this is a strong fit. Job Description: Maintain, troubleshoot, and repair high-speed bakery production equipmen

Titusville, FL 32796 • (20.9 miles) • Full Time • $26.00 to $34.00 / hr • 10/22/2026

Pay Rate: $26 - $34 per hour About RANDALL RANDALL is a premier self-performing $100M+ subcontractor providing integrated Mechanical, Electrical, Plumbing, Fire Protection, Architectural Metals, and Offsite Construction/Manufacturing solutions across Florida and the Southeast. With 35+ years of operational excellence and a team of 500+ professionals, we combine the grit and dedication of our grassroots origins with the innovation of a modern industry leader. Our 100,000 sq. ft. fabrication facility in Apopka, FL serves as a strategic logistics hub, supporting major commercial, industrial, and aeronautical projects across the Southeast and beyond. Randall Electrical - Titusville is currently seeking qualified Commercial / Industrial Electricians to work on large projects along the Space Coa

Orlando, FL • (40.6 miles) • Full Time • 10/22/2026

Description: Music City Reconcurrently has an opening for a Automotive PDR Technician to join our team. If you are interested in working for a successful company in a great working environment, this is the place for you. Excellent Organizational Skills Required. Strong communication and interaction skills required. Valid Driver's License and good driving record required. The responsibilities for the Automotive PDR Technician is using specialized tools, remove dents from vehicles without replacing or respraying the partusing the MCR process. Music City Recon is a successful and expanding company with many career opportunities and is excited to discuss the possibilities with you. Requirements: Ability to develop relationships and provide a high level of customer service Valid driver’s licens

Apopka, FL 32703 • (41.8 miles) • Part Time • 10/22/2026

Descripcin de la empresa FarHills Logistics is seeks motivated, customer-focused individuals to join our team delivering packages to homes, retail locations, and businesses. As a delivery associate, you will play a key role in ensuring customer orders are delivered on time, every time. We offer full and part-time opportunities. FarHills Logistics is an Equal Opportunity Employer. Descripcin del empleo Job description Join our team at FarHills Logistics, where we prioritize safety, teamwork, and customer satisfaction. As an essential part of our delivery team, you will assist in ensuring that Amazon packages are delivered efficiently and accurately to customers in your community. We are seeking energetic and motivated individuals to fill the role of Delivery Helper. In this position, you wi

Orlando, FL 32809 • (43.2 miles) • Full Time • 10/21/2026

Job Title: Cut & Grind Specialist Employment Type: Full-Time Classification: Non-Exempt Reports To: Team Leader Location: Orlando, Florida Why Regal? For over five decades, Regal Boats has been a beacon of excellence in the boating industry. As a family-owned and operated company since 1969, we take immense pride in our tradition of craftsmanship and quality. With a dedicated team of 800+ skilled members, we have continued to innovate and build stunning 20-50 foot boats that embody the essence of luxury and performance. What sets Regal Boats apart is our status as a privately owned company, allowing us to stay true to our values and focus on our team members. We believe in the power of nurturing our team, fostering a culture of growth, and offering advancement opportunities. At Regal Boats

Orlando, FL 32818 • (42.5 miles) • Full Time • 10/20/2026

Job Title: Compressor Blade Technician Location: Orlando, FL Type: Contract Work Model: Onsite – onsite Responsibilities Set up and perform compressor blade blending, dimensional verification, and nondestructive testing inspections in accordance with engineering specifications, company quality standards, and customer requirements. Utilize precision measuring instruments and advanced inspection equipment to ensure structural integrity, dimensional compliance, and surface finish requirements of compressor blades and related components. Read, interpret, and execute operations per engineering drawings, repair manuals, specifications, and work instructions. Perform compressor blade blending, polishing, and surface restoration while maintaining dimensional and structural requirements. Measure ti

Lake Mary, FL • (28.6 miles) • Full Time • $20.00 to $25.00 / hr • 10/19/2026

Excellent opportunity for a professional individual ready to move ahead in a great career. Founded in 1983, Control Micro Systems is a manufacturer of high-tech laser-based material processing systems. We have an immediate need for an Electro-Mechanical Assembler. The duties and requirements of the position include: Summary Responsible for fitting and assembling electromechanical equipment and machines. Primary responsibilities: Read and interpret schematics, blueprints, and drawings. Assemble parts for electromechanical equipment. Drill and spot-face bolt holes. Electrical panel assembly. Inspect and test completed units. Interpret instructions. Assemble parts list. Order parts if needed. Tag or mark identifying information on parts. Position and fasten units to assemblies and subassembli

Orlando, FL • (40.6 miles) • Part Time • $16.00 to $18.00 / hr • 10/19/2026

JOB TITLE: General Facility Maintenance REPORTS TO: Production Manager SHIFT: Flexible - Part time (approximately 20 hours week) PAY TYPE: Hourly Facility General Maintenance and GeneralRepairs, Driver Assist in cleaning the production floor, sweeping metal chips, mopping up spills Utilizing the company van, drive company products to and from suppliers ensuring safe deliveries at all times Ability to utilize hand tools to assist in general building maintenance and repair tasks as needed. Follow directions as given to complete the assigned task as required. Work closely with team members and supervisors to meet daily task goals. Conduct routine maintenance checks to ensure equipment remains in good working order. As needed and where possible assist with simple machine maintenance tasks Perf

DeLand, FL 32724 • (21.9 miles) • Full Time • $26.00 to $31.00 / hr • 10/18/2026

Ready to troubleshoot, optimize, and keep production humming? Join Pall Corporationpart of Danaher’s global familywhere our filtration, separation, and purification technologies touch everything from airplane engines and hydraulic systems to smartphones, OLED screens, paper, and even scotch. You’ll work on-site in DeLand, FL, reporting to the Maintenance Supervisor, and helping a 75+ year legacy of innovation deliver results every night. Why this role Own the electrical reliability of PLC- and CNC-controlled assets. Partner closely with operators to ensure equipment readiness and top performance. Apply preventative and predictive maintenance methods to prevent downtime. Schedule and pay Hours: Sunday night through Friday morning, 11 PM–7 AM. Overtime: As needed. Compensation: $28–$35 per h

Edgewater, FL 32132 • (4 miles) • Full Time • 10/17/2026

***Previous Boat/Manufacturing Assembly Experience is Highly Preferred*** Company Description Everglades Boats is an industry leader in premium offshore fishing boats. Founded in 1997, Everglades provides the ultimate choice for discerning boat owners and knowledgeable big-water anglers. Everglades is a high-end, refined brand that makes a personal statement about the status and savvy of its owner by applying best-in-class fishing amenities, premium-grade materials, and a highly-refined fit and finish. Widely recognized and respected in the industry for its hull performance and ride, Everglades patented RAMPCAP hulls are found throughout its model lineup. Receiving numerous industry awards and an unparalleled reputation for superior performance, Everglades recruits and retains the best tal

Orange City, FL • (23.4 miles) • Full Time • $32.00 to $36.00 / hr • 10/17/2026

We are seeking experienced Industrial Electricians for a permanent, direct-hire opportunity in the Orange City, FL area. Candidates must have hands-on electrical experience in a wastewater treatment plant or water treatment facility and be capable of installing, wiring, troubleshooting, and maintaining industrial electrical systems and equipment. Pay: $32–$36/hour, based on experience Schedule: Monday–Thursday, 7:00 AM–5:30 PM Hours: Four 10-hour shifts per week Start Date: ASAP Responsibilities Bend, install, and run electrical conduit. Pull and terminate electrical wiring. Install and wire electrical panels and equipment. Install light fixtures and other electrical components. Connect wiring to breakers, transformers, and other electrical components. Install, assemble, test, maintain, an

Altamonte Springs, FL 32701 • (33.4 miles) • Full Time • 10/16/2026

Benefits: A positive and collaborative work environment Company work truck is provided 401(k) Free uniforms Paid time off Company Overview Generator Supercenter, Inc. is a leading provider of energy solutions committed to making a positive impact for our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Job Summary The Generator Mechanic/Service Technician will consult with the Service Manager to plan their work and travel schedule in the surrounding area. Using our company-supplied vehicle, you will travel to the customer’s residence to perform repair work and preventative maintenance on the customer’s whole home standby generator. You will regularl

Daytona Beach, FL 32117 • (23.7 miles) • Full Time • 10/16/2026

Summary Manufacture customized Granite, Marble, Corian, and Engineered stone countertops and related products that meet customer specifications. Primary Tasks & Responsibilities Examines specifications of the customer’s order using drawings, work orders, or blueprints to determine the characteristics of the finished item, materials to be used, and machine setup requirements. Fabricates work pieces as determined by work order specifications. Retrieves correct materials and performs various fabrication duties. Examines work piece visually, by touch, or using tape rule, calipers, or gauges to ensure product meets desired standards. Machinery operation - must be able to maintain machinery to standards, set points, programming, adjust to various product types, and conduct preventative maintenan

Mims, FL 32754 • (16.5 miles) • Full Time • $22.00 to $30.00 / hr • 10/15/2026

Job Summary We are seeking an experienced Industrial Maintenance Technician to join our maintenance department. The ideal candidate will have hands-on experience troubleshooting, repairing, and maintaining industrial equipment and systems. Pay will be based on experience and technical knowledgethe more skills you bring to the position, the more you can earn. Responsibilities Perform preventive and corrective maintenance on industrial machinery and equipment. Troubleshoot and repair compressed air and pneumatic systems . Diagnose and repair hydraulic systems and components . Troubleshoot electrical systems, motor controls, and drives . Diagnose and troubleshoot PLCs and automated equipment . Troubleshoot and maintain industrial lighting systems . Read and interpret blueprints, electrical sc

Orlando, FL • (40.6 miles) • Full Time • $15.00 / hr • 10/15/2026

Job Title: Production Assembler(I-III) Department: Operations Position Summary: This position performs frequent rigorous tasks such as, mounting, cleaning, washing, and inspection of components under a microscope. These processes require knowledge of use of various equipment such as bake ovens, ultrasonic cleaners, as well as various tools such as microscopes, hand brushes and hand tools. The assembler will also load and operate various automated equipment and perform a variety of tasks in conjunction with component assembly. Able to read and follow procedures exactly as written. Continues to follow Good Manufacturing Practices. Performs a variety of manual tasks such as mounting and curing components, inspecting under a microscope, hand cleaning of components, etc. Load, run, and monitor

Daytona Beach, FL 32117-5101 • (22.5 miles) • Full Time • 10/15/2026

Description: We are seeking a skilled and motivated CNC Maintenance Mechanic to join our manufacturing team. This position is responsible for troubleshooting, repairing, and performing preventive maintenance on CNC machining centers and other production equipment to maximize uptime and support production goals. The ideal candidate has strong mechanical troubleshooting skills, experience with CNC equipment, and the ability to work independently in a fast-paced manufacturing environment Requirements: Essential Responsibilities Perform preventive maintenance on CNC machines and manufacturing equipment. Diagnose and repair mechanical, hydraulic, pneumatic, and lubrication system issues. Troubleshoot machine breakdowns to minimize downtime. Replace worn or damaged machine components. Perform ma

New Smyrna Beach, FL 32168 • (9.1 miles) • Full Time • $20 to $30 / wk • 10/14/2026

Benefits: Bonus based on performance Employee discounts Training & development About the Role: Join Higley's Automotive Equipment Solutions as a Mobile Industrial Maintenance Technician, where you’ll play a vital role in maintaining and servicing a diverse range of equipment. We are dedicated to providing top-notch solutions to our clients in New Smyrna Beach, FL, and are looking for passionate individuals to help us achieve excellence. Responsibilities: Perform routine maintenance and repairs on industrial equipment at client locations. Diagnose and troubleshoot mechanical and electrical issues effectively. Utilize diagnostic tools and techniques to ensure equipment reliability. Maintain accurate records of maintenance activities and service reports. Communicate effectively with clients t

Port Orange, FL • (14.5 miles) • Full Time • 10/14/2026

Company Description Applus+ IDIADA is a global partner to the automotive industry, supporting its clients in their product development activities by providing design, engineering, testing and homologation services. As a TOP Employer certified company, we have a large team of more than 3000 professionals drawn from over 22 countries, as well as an international network of subsidiaries and branch offices in 25 countries which ensures that our clients get customized, added-value solutions. IDIADA offers you the opportunity to develop a career in one of the worldwide leading automotive engineering companies. At Applus IDIADA we are looking for talent to help us shaping the mobility of tomorrow with safer, more efficient, and sustainable vehicles. With presence in 22 countries, we offer job pos

Daytona Beach, FL • (22.5 miles) • Full Time • $26.00 to $32.00 / hr • 10/14/2026

A growing precision machine shop in the Daytona Beach area is hiring a CNC Maintenance Technician on 2nd shift (3pm to 11pm). You will keep CNC machining centers and production equipment running, from preventive maintenance to fast breakdown repair. What you will do: Perform preventive maintenance on CNC machines and manufacturing equipment Diagnose and repair mechanical, hydraulic, pneumatic, and lubrication system issues Troubleshoot machine breakdowns to minimize downtime Replace worn or damaged machine components Perform machine alignments and mechanical adjustments Read mechanical drawings, manuals, and schematics Assist with machine installations, relocations, and equipment upgrades Keep accurate maintenance records and work orders Work with production to resolve equipment issues Fol

Cocoa Beach, FL • (44.1 miles) • Full Time • 10/14/2026

Who We Are! Aetos Systems, Inc. was founded in early 2007 to provide a unique work experience. Employees are the foundation of our business. Our leaders work hard every day to empower and support our employees in the development of their careers, giving back to their community and providing their expertise and innovations to our customers - solving real world business problems. Our culture focuses on our people -- our strongest asset -- ensuring they have an environment to provide best-in-class service and solutions to our customers. We always strive to do the right thing. Have you imagined working for a dynamic small business where you are heard, highly regarded and able to do what you love all in one package? This is your opportunity! Join now! Job Summary The Mechanical Calibration Tech

Orlando, FL • (40.6 miles) • Full Time • 10/13/2026

McCorvey Sheet Metal is a family-owned and operated company seeking a highly qualified, skilled Sheet Metal Fabricating Machinery Service & Repair Technician! Immediate availability and room for growth. McCorvey Sheet Metal works primarily on larger projects such as hospitals, research labs, sports stadiums, schools, and many other vertical markets. Summary: As a Machinery Service & Repair Technician, you will use your skills to support the Maintenance team in repairing and maintaining Sheet Metal Fabricating equipment with hydraulic and pneumatic systems throughout the building. Responsibilities: Complete preventative maintenance routines Troubleshoot electrical and mechanical problems related to all Material Handling Equipment, which includes Coil line, Iowa Precision Pro-Fabriduct Coil

Orlando, FL 32822 • (38.1 miles) • Full Time • 10/11/2026

The Mechanical Engineering Project Manager in this role manages the full scope of work from preparation of proposal through construction. Duties include overseeing all technical aspects of facility projects, reviewing all documents for quality control and quality assurance, and coordinating engineers and sub-consultants. This position is based in AVCON's Orlando, Florida office. ESSENTIAL FUNCTIONS (may include but are not limited to) : Project Management: Responsible for design and management of facilities engineering projects including ensuring completeness and accuracy of design effort. Responsible for the various design elements to complete a project, system, component, or system with other team members with clear and specified objectives involving conventional types of plans, surveys,

DeLand, FL • (24.3 miles) • Full Time • 10/10/2026

Job Summary The Maintenance Technician II enhances operational efficiency by performing intermediate-level maintenance, troubleshooting, diagnostics, and repair of manufacturing equipment, machinery, and facility systems. This role plays a key part in preventive maintenance, equipment reliability, and downtime reduction by identifying root causes, completing repairs within established standards, and supporting production needs with a strong focus on safety, quality, and uptime. The Maintenance Technician II works with independence and may provide guidance or training to less experienced colleagues. Essential Functions: Safety: Embrace the values of the Enpro safety pledge in each of the responsibilities below. Participate in the organization’s safety culture and aim to continuously improve

Cocoa, FL 32926 • (37.2 miles) • Full Time • $16.00 to $18.00 / hr • 10/10/2026

JOB TITLE: Trailer Assembler JOB SUMMARY The Trailer Assembler is responsible for assembly of trailers from start to finish. POSITION QUALIFICATIONS/REQUIREMENTS Must be able to lift and carry items weighing up to 50 pounds unassisted 2+ years of experience working with hand and power tools PREFERRED SKILLS: Knowledge of automobile assembly Problem solving skills Strong communication skills Dependable and punctual CORE DUTIES Fully assemble trailers from start to finish Communicate with teams on priorities and quantities of parts Maintain a clean and safe assembly area HOURS 1st shift position Monday through Friday, 6:00 a.m. - 3:00 p.m. Overtime as needed SPECIAL REQUIREMENTS Candidates that accept an offer of employment will be required to pass a background and drug screen. Candidates mu

Cocoa, FL 32926 • (37.2 miles) • Full Time • $20.00 to $23.00 / hr • 10/9/2026

Description: JOB TITLE: CNC Machine Cleaning Technician JOB SUMMARY We are seeking a dedicated and detail-oriented CNC Machine Cleaning Technician to join our operations team. In this role, you will be responsible for ensuring the cleanliness and functionality of our machinery, which is crucial for maintaining optimal production efficiency. Your work will play a vital role in supporting our commitment to quality and safety standards as well as maintaining a high standard of cleanliness. POSITION QUALIFICATIONS/REQUIREMENTS High school diploma or equivalent. Proven experience in a cleaning or maintenance role, preferably in a manufacturing or industrial environment. Familiarity with cleaning agents and safety protocols. Strong attention to detail and ability to follow instructions accuratel

Orlando, FL 32805 • (40.9 miles) • Full Time • 10/9/2026

Description: American Road Group is seeking a Service Helper at Orlando Harley-Davidson Historic Factory in Orlando, FL! Summary Aids all employees of the Service Department as needed. Helps run an efficient and customer-oriented department. Why You'll Love this Role • Fun, high-energy dealership environment! • Employee discounts on motorcycles, merchandise and parts. • 401k Retirement Plan Major Duties and Responsibilities Helping Service Personnel Removal of trash, cardboard, wood, etc. from dealership. Wash and detail Motorcycles as necessary, ensuring customer satisfaction. Assist Technicians with keeping the Service Department clean and organized. Assist with new motorcycle un-crating. Maintain and periodically check inventory of charged motorcycle batteries. Re-fill stock of oil, ele

Sanford, FL • (24.5 miles) • Full Time • $16.00 to $20.00 / hr • 10/5/2026

Job Title: Converting Dept – Converting Production Utility / Machine Operator Reports To: Converting Manager Position Details · Maintain a safe and clean workplace · Understand production processes · Set-up machine, check and handling raw materials · Move and maneuver material and equipment using manual or motorized devices · The position works on a rotation basis, including days, nights, weekends and holidays covering 24/7. Education & Experience Requirements · High School Diploma/G.E.D. · 1-3 years’ experience as a machine operator · Associate degree/technical certificate preferred · Manufacturing/warehouse experience preferred · Knowledge of paper industry preferred Knowledge, Skills, & Abilities · Must be able to read, write, speak, and understand English · Ability to work in a team-or

Orlando, FL • (40.6 miles) • Full Time • 10/3/2026

Start working this week as an Industrial Maintenance Technician with a growing company in Orlando. We are hiring experienced maintenance professionals for a full-time opportunity offering competitive pay, weekly pay, steady weekday hours, and immediate openings. Industrial Maintenance Technician Location: Orlando, FL Pay: $26.00 - $31.00 per hour Schedule: Monday-Friday | 7:00 AM - 4:00 PM Job Description • Perform maintenance and repairs on production equipment and facility systems • Troubleshoot 3-phase motors, electrical systems, hydraulics, and pneumatics • Repair and maintain machinery including welders, cranes, press brakes, saws, and shop equipment • Complete preventative maintenance to minimize downtime • Perform basic facility maintenance including plumbing, electrical, and HVAC r

Orlando, FL • (40.6 miles) • Full Time • 10/2/2026

About Westbrook Service Company: Westbrook Vision To be a thriving company that makes a lasting impact in Central Florida for generations to come. Westbrook Mission To create an employee experience so profoundly different that it leads to changed lives and customers for life. Job Type : Full-time Pay : $75,000.00 to $115,000 per year Schedule : Monday to Friday (Weekends as needed) Employee Benefits : Health Insurance - 87% Paid by the Company (Employee Plans starting at less than $11 per week) Unlimited Paid Time Off (PTO) Paid Holidays per year – 8 Paid Hurricane Days – 3 Paid Paternity/Maternity Leave Paid Life Insurance Paid Dental Premiums Paid Long-Term Disability Insurance 401K Match – Plan Increasing up to 7½% Vision insurance and Free Prescription Safety Glasses Gym Membership Rei

Apopka, FL 32703-7761 • (41 miles) • Full Time • 10/2/2026

Description: Position Summary JE Technology Solutions is seeking an experienced Industrial Maintenance Technician to support our custom metal fabrication and manufacturing operation. We are looking for a hands-on technician with strong troubleshooting skills across electrical, PLC/controls, mechanical, pneumatic, hydraulic, and facility systems. The right candidate will be comfortable diagnosing equipment failures, identifying root causes, completing repairs, and helping prevent recurring downtime. This position supports both manufacturing equipment and facility maintenance. The technician will work closely with the Facilities and Maintenance Manager and will take ownership of assigned equipment reliability, preventive maintenance, recurring equipment issues, and day-to-day maintenance exe

Maitland, FL 32751 • (34.5 miles) • Full Time • 10/1/2026

Southern Home Services is a residential HVAC, Plumbing and Electrical company that acquires, owns, and operates businesses around the United States. We are seeking business leaders to join our growing team and become an integral part of our company's future. Are you ready to Be Part of Something BIGGER! The Senior Manager of Capacity Planning and Dispatch Operations serves as the architectural backbone of our service delivery engine. The positions manages the enterprise operating system that converts available field labor into accurate, bookable, dispatchable, and revenue-producing capacity across multiple home service brands and regions. This role plays a critical part in driving operational efficiency, scaling newly acquired brands, and directly impacting EBITDA . The role connects cente

Orlando, FL 32805 • (40.9 miles) • Full Time • $950 to $1,200 / wk • 10/1/2026

Benefits: Company car Competitive salary Flexible schedule Job description We are a amusement machine company that operates through out the Orlando area in various locations (gas stations and convenience stores). We are looking for a technician who will be responsible for the repair and maintenance of our games. Technician duties are, installing, servicing and repairing game machines and delivering machines to locations. Some electric knowledge is required to test, repair and maintain the game machines and related gaming equipment. We are willing to train the right candidate. Duties: Builds, rebuilds, converts, adjusts, calibrates, and modifies any game machine and related gaming equipment. Diagnose causes of malfunctions and failures and take immediate appropriate action. Maintains a clea

Casselberry, FL • (31.2 miles) • Full Time • $15.00 to $18.00 / hr • 9/29/2026

We are seeking Entry Level Cable Assemblers to become an integral part of our team! You will perform assembly line tasks. GREAT BENEFITS OFFERED: Health, Dental, Vision, 401k & company match, and more! Flexible work schedule 8:00 am - 4:30 pm (Overtime offered) Get paid weekly Responsibilities: Count and bag parts Insert wires Maintain a clean and orderly work area Run wire processing equipment. Qualifications: No previous experience is required Ability to work well in teams Ability to thrive in a fast-paced environment Sodering Skills \nCompany Description Manufacturer of cable assemblies and wire harnesses. Company Description Manufacturer of cable assemblies and wire harnesses.

Orlando, FL • (40.6 miles) • Full Time • 9/29/2026

Role Overview Set up and perform compressor blade blending, dimensional verification, and nondestructive testing inspections in accordance with engineering specifications, company quality standards, and customer requirements. Utilize precision measuring instruments and advanced inspection equipment to ensure structural integrity, dimensional compliance, and surface finish requirements of compressor blades and related components. Key Responsibilities Read, interpret, and execute operations per engineering drawings, repair manuals, specifications, and work instructions. Perform compressor blade blending, polishing, and surface restoration while maintaining dimensional and structural requirements. Measure tip height and other critical dimensions using precision measuring tools and gauges. Set