Calhoun, GA 30701 • (42.7 miles) • Full Time • 9/24/2026

Monday-Friday from 8AM-4:30PMThe Broadloom Inspection table roll up operator reports to the Broadloom Inspection Table supervisor. The inspection table roll up operator is responsible for wrapping and labeling each roll that is ran across the table.Safety. The table roll up operator must keep safety in mind at all times. The roll up operator works in close proximity to moving parts of the inspection table. The roll up operators must obey all safety guides. Hands (or any other body part) should not be placed in or on any part of the roll up or the roll up table. If at anytime the roll up operator has a question about safety they should speak with the inspection table supervisor immediately. If at anytime there is an issue at the roll up end of the table that cannot be seen from the inspecto

Dalton, GA • (37.2 miles) • Full Time • 9/23/2026

PURPOSE OF JOB:To operate the Stratatec Tufting Machine and keep a record during the shift of production and downtime.JOB DESCRIPTION:Monitor carpet quality.Navigate SAP.Navigate BarcoMust work in a team Environment.Ability to Mend.Abide by our WCM Philosophies.Ability to run knots efficiently.Change backing.Make out roll tickets.Doff rolls.Housekeeping of area.Other duties as instructed by supervisor.NEEDED SKILLS AND ABILITIES:Ability to bend, pull, and liftAbility to see and thread multiple colors.Ability to read, write, and do basic mathKnowledge of air splicerAbility to understand graphic patternsAbility to tie weaver's knotPreferred High School Diploma or GED EquivalentPrior experience operating a tufting machine with all ends controlled by servosWhat We OfferA commitment that Safety

Fairmount, GA 30139 • (34.9 miles) • Full Time • 9/22/2026

Description: Will have the responsibility for operating and keeping the dehack equipment clean and perform preventive maintenance on it.Requirements: Job RequirementsMust have the ability to meet production goals.Have the skill (or learn) to operate automated machinery.Keep a clean work area. (i.e. work area on the platform must be cleaned daily and trash thrown away)A self-motivated employee is a plus.Must be willing to work as a team player.Knowledge and ability to use hand tools to adjust, repair, and perform preventive maintenance as needed.Must be willing to learn all positions on the DehackHave the ability to work as a team player and help on other jobs as neededPerform TPM as required.Physical RequirementsMust be able to lift 50 lbs.Must be able to twist, stoop, and bend frequently.

Canton, GA 30115-8218 • (41.1 miles) • Full Time • 9/22/2026

NOW HIRING: Machine Loader – Canton, GAOpenwork is seeking a reliable, hardworking Machine Loader to join a great local company in Canton! In this role, you will be responsible for material handling and loading cardboard into machinery to keep production running smoothly.Pay: $16.00/hour Shift: 1st Shift | Full-Time Location: Canton, GA Type: Contract-to-HireKey Responsibilities:Loading cardboard and raw materials onto production machines. Assisting with general labor and material handling around the warehouse. Keeping up with machine speeds to ensure product flows without interruption.Maintaining a clean, safe, and organized workspace.What you’ll need:Previous experience in a warehouse, manufacturing, or production environment.Packaging experience is a major plus!Ability to stand for the

Ball Ground, GA 30107 • (33.9 miles) • Full Time • 9/15/2026

Description: 1st ShiftSOAR with us: Safety, Ownership, Advancement, and RespectFueling Excellence on the Front Line.Are you ready to launch a career in aerospace manufacturing with a company that values your contribution and invests in your future? At Universal Alloy Corporation, we’re looking for dedicated individuals who want to build a long-term career and SOAR with us.________________________________________Position OverviewAs an Age Operator, you’ll play a vital role in inspecting and heating high-strength structural components used in aerospace applications worldwide. This is a hands-on opportunity to contribute to a mission that literally helps the world take flight.________________________________________Why SOAR with UAC?Safety FirstWe prioritize a safe work environment and provid

Dalton, GA • (37.2 miles) • Full Time • 9/10/2026

GEDIA Georgia offers competitive pay and benefits including health care, 401k, holidays, paid time off, short term disability, paid paternity leave, and an exceptional place to work. We are a multicultural organization that is growing and looking for people who want to be part of the team.We are seeking Laser Operators for our growing Tier 1 supply company in Dalton, GA! The right candidate will be an energetic team player who is interested in becoming an expert and growing within our company for a long term and satisfying career.RESPONSIBILITIES:ProductionQuick quality checkQuality control documentation and implementationTransport materials throughout the plantAssistchanging the laser devicesLabeling and marking componentsMaintain cleanliness on laser machine and work areaREQUIREMENTS:Mac

Cleveland, TN 37312 • (42 miles) • Full Time • 9/30/2026

OverviewThe caring, compassionate work that our stakeholders do is really making a difference and helping our company achieve its vision of radically changing the landscape of HealthCare, forever.ResponsibilitiesPerform administrative functions requiring independent judgment and timeliness of projects given in order to enhance the effectiveness of the department and the organization as a whole.Provide support in functional areas which may include filing, special copying projects, billing, scheduling of staff, resolving customer service concerns and other general administrative duties as required.Prepare caregiver work schedules for each calendar month, assign duties and find call-in replacements in order to meet corporate, state and federal staffing guidelines.Canvas clients for their spec

Blairsville, GA 30512 • (19.8 miles) • Full Time • 10/2/2026

Job Overview:Nelson Tractor Company is a leading dealer in agriculture and construction equipment, and we’re looking for an experienced, hands-onService Technicianto join our Service Department. If you take pride in quality work, enjoy problem-solving, and want to be part of a team that values both customers and co-workers, we’d love to talk.This is a full-time position working with a wide variety of equipment, like Kubota, in a fast-paced, supportive shop environment.What You'll Do:Service and repair tractors, mowers, and construction equipmentDiagnose mechanical issues and help prepare estimates for repairsWork closely with Service Advisors to make sure we’re meeting customer needsStay current with ongoing training and best practicesContribute to a positive, team-oriented shop atmosphere

Jasper, GA • (25.5 miles) • Full Time • 10/1/2026

Description: Service Technician – Standby Generators Location: Jasper, GA / North Georgia MarketPay: $20.00 – $30.00 per hour, based on experienceJob Type: Full-TimeTravel: Approximately 25%Company Vehicle ProvidedAbout Canter Power Systems Canter Power Systems is the largest residential backup generator installer in the United States. Founded in 1948, we specialize in providing complete backup power solutions, including generator sales, installation, service, and maintenance.As a Generac Prestige Dealer, Canter has earned Generac's highest level of recognition for delivering exceptional service, quality, and reliability. Our mission is simple: to help keep our customers protected, comfortable, and powered when they need it most.The Opportunity We are looking for an experienced Service Tec

Cleveland, TN • (39.8 miles) • Full Time • 10/1/2026

Your Truck Is Stocked. Your Schedule Is Set. Go Do What You're Good At.At Langley Roofing, part of the Alloy Roofing family, we run a steady repair operation in Chattanooga, TN. Your jobs are booked and dispatched for you. Your truck is stocked. When you get to a job, your focus is the workdiagnose the problem, fix it right, make sure the homeowner is taken care of, and move to the next one. That's the job.We're hiring a Service/Repair Technician who knows their trade, doesn't need supervising in the field, and takes genuine pride in leaving a homeowner's roof better than they found it. If that's you, keep reading.What You'll DoPerform residential roofing repairsshingles, flashing, pipe boots, valleys, gutters, ridge cap, and minor decking.Diagnose roof leaks and storm damage on-site; comm

Calhoun, GA 30701 • (42.7 miles) • Full Time • 10/1/2026

Who We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest assetour employees.What You Will Be Doing: The Machine Technology Service Technician exists to service complex machine technologies such as CAT Grade 2D/3D, Caterpillar Telematics (Visionlink/Productlink), Assist, Payload, E-Fence, CAT Detect Camera systems, CAT Command LOS (Line of Sight) & NLOS (Non Line of Sight), and MORE! The Machi

Calhoun, GA 30701 • (42.7 miles) • Full Time • 9/30/2026

Our Company We are a leading plastics manufacturing company with an emphasis on strategic engineering and innovation. We use the latest processes and software to elevate the way we manufacture parts, all the while forming strong relationships with customers and each other. Our people are our number-one priority, and we are committed to helping you reach your personal and career goals through continuous learning and development opportunities, competitive compensation and benefits, and an enhanced work-life balance.Role Summary As an Automation Technician, you will help keep production running reliably by maintaining and optimizing automation and controls systems on D Shift (7pm–7am, Wednesday–Friday and every other Saturday). The role supports consistent process performance, reduces unplann

Dalton, GA 30721 • (33.7 miles) • Full Time • 9/27/2026

Key Responsibilities:Respond to roadside and on-site service calls using a fully equipped service truck.Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial.Diagnose and repair tire-related issues and perform light mechanical repairs as needed.Inspect tires and wheels for wear, damage, and proper inflation.Perform fleet inspections and preventative maintenance checks when required.Operate tire pressure monitoring systems (TPMS) and other diagnostic tools.Maintain the service truck, tools, and equipment in safe operating condition.Follow DOT regulations, company safety policies, and traffic laws at all times.Provide exceptional customer service, including clear communication of service details and timelines.Assist with w

Ball Ground, GA 30107 • (33.9 miles) • Full Time • 9/24/2026

We are currently hiring for the position of Generator Technician. As a Generator Technician, you will be responsible for installing, maintaining, and repairing generators and their related systems. Working with a variety of generator models and sizes, you will ensure their optimal performance and reliability.Your key responsibilities as a Generator Technician will include:Installing and commissioning generators according to manufacturer guidelines and specificationsPerforming routine maintenance and inspections on generators, including oil and filter changes, fuel system inspections, and component testingDiagnosing and troubleshooting electrical and mechanical issues, identifying faulty components and implementing necessary repairsReplacing faulty parts and components, ensuring proper inst

Cumming, GA 30040 • (42.8 miles) • Full Time • 9/10/2026

TRC Talent Solutions Fueling Your Career Growth Are you a hands-on problem solver who thrives in a high-tech environment? TRC Talent Solutions connects exceptional professionals with extraordinary opportunities, and we are currently seeking a highly skilled Automation Maintenance Technician for a premier client. If you are ready to elevate your career and work with cutting-edge technology, we want to talk to you.About Our Client Join a trailblazing team at a multi-award-winning leader in the industrial automation industry. Known for a phenomenal company culture, innovative technology, and a steadfast commitment to continuous improvement, this organization offers a dynamic work environment where your technical expertise directly drives operational success and warehouse efficiency.Position:

Dalton, GA 30721 • (33.7 miles) • Full Time • 9/20/2026

Description: The Electrical Design Engineer II develops complete engineering work under the guidance of senior technical staff while taking increasing ownership of coordination, quality, schedule, and communication. This role is expected to make sound design decisions within established criteria, support construction administration, and actively develop toward independent technical leadership.Perform and document electrical load calculations, feeder and branch-circuit sizing, voltage-drop calculations, and equipment selections appropriate to the assigned level.Design and coordinate normal and emergency power distribution, lighting and lighting controls, grounding/bonding, and electrical connections for building systems.Develop one-line diagrams, panel schedules, lighting plans, power plans

Dalton, GA • (37.2 miles) • Full Time • 10/6/2026

I.K. Hofmann USA has a need for Process Technicians in Dalton, Ga.Job Responsibilities:•usage of hand tools to prepare, blend and package ingredients for shipment•Conducting material handling by packing, stacking, and palletizing product with forklift, pallet jacks, etc.•Maintain accurate written and electronic records as required•Maintain a safe and clean work environmentEssential Job Functions:•Must be able to move up to 30lbs.•Must be able to remain in a stationary position for some parts of the day•Must be able to position oneself to access equipment, as neededWork Environment:•Must be able to wear protective gear such as work boots•Are sometimes exposed to very hot or very cold temperatures. Workspaces may not be temperature controlled.•May have to get into awkward positions to reach

White, GA • (44.7 miles) • Full Time • 10/6/2026

At Toyo, we envision our Mechanical Engineers as innovative problem-solvers who drive reliability and performance. In this role, you'll play a critical part in designing, implementing, and sustaining mechanical, electromechanical, and industrial systems that power our processes. Your contributions will directly impact our commitment to excellence, ensuring our equipment not only meets but exceeds production demands with efficiency and resilience.REQUIREMENTSMust have an Engineering Degree.Must have Manufacturing ExperienceMust have 2+ management experience to direct a group of machinists.ESSENTIAL DUTIES AND RESPONSIBILITIESinclude the following. Other duties may be assigned.Directs and coordinates fabrication and installation activities to ensure equipment and systems conform to engineeri

Ball Ground, GA 30107 • (33.9 miles) • Full Time • 10/5/2026

Looking for a punctual, reliable machinist that is committed to doing a thorough job.Requirement: 5 years experience as CNC machinistJob type: Full time positionDuties: operate CNC milling centers, inspect dimensions, follow basic manufacturing instructionsDesired skills: ability to read and interpret prints, ability to use precision measuring tools, have basic understanding of machine toolsDesired qualities: attention to detail, strong work ethicDay shift: Monday-Thursday 7am-5pmPay: $18.00 - $28.00 per hour (starting rate based on education, experience, and skill level)Benefits:401(k)Dental insuranceHealth insuranceHealth savings accountLife insurancePaid time offVision insuranceExperience:Machining: 5 years (Required)GD&T: 3 years (Required)\nCompany DescriptionPMW is a small, family-ow

Cumming, GA 30041 • (44.9 miles) • Full Time • 10/4/2026

Job Description We are looking for an Electrical-Mechanical Technician with a strong background in electrical within Kemper America, you will perform a variety of installation and supervision/technical support and provide on-site and remote technical customer support and in house repair of equipment. Core Responsibilities · Supervision of technical equipment and parts. Tracking equipment repairs and following up with customers on issues to make sure the customers are being updated on repairs. · Troubleshoot electrical equipment ranging from 24V to 480V. · Directs or performs the installation of specialized systems as necessary. · Maintenance and repair of mechanical parts. · Work at heights of up to 90 feet · Following all OSHA requirements on customer sites. · Performs customer onsite ins

Dalton, GA 30721 • (33.7 miles) • Full Time • 10/3/2026

Step into a day in this role Morning starts with a quick scan of quality dashboards, digging into PPM trends and scrap drivers. By mid-morning you are debriefing an internal IATF 16949 audit and aligning actions. After lunch, you are on a customer call closing the loop on an 8D, then head to the floor to validate a new gage and verify a control plan change. Later in the week you assemble a Level 3 PPAP, guide a PFMEA workshop, and coach production on a new inspection instruction for a launch part. Role overview Reporting to the Quality Manager, you serve as a hands-on champion of our quality management system for a Tier 1 automotive environment. Compliance to ISO 9001, TS 16949, and IATF 16949 is the top priority. You are the primary interface to customers for quality topics and a key pro

Cleveland, TN 37312 • (42 miles) • Full Time • 10/3/2026

Job Title:CAD SpecialistDivision:Precision Pulley & Idler (PPI)FLSA:Non-ExemptGrade:3Job Status:Full-TimeTravel Required: Revision Date:July 1, 2021Reports To:Engineering ManagerPURPOSE OF POSITIONResponsible for reviewing, detailing and resolving problems with specifications and engineering requirements turned into technical documents for communication with other areas within company and customers using CAD and other software.ESSENTIAL DUTIES AND RESPONSIBILITIESThe following duties are normal for this position. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned.More specifically, the employee owner will:Detail engineered designs including geometry, fits, tolerances, instructions and material specifications on documents for action by oth

Canton, GA 30114 • (42 miles) • Full Time • 10/2/2026

Are we the road to your future?We are currently searching for experienced Senior level and entry level CEI Inspectorsto support ourSoutheast Regionlocated inAtlanta, GA. The CEI Inspector roles supports Project Engineers and Project Administrators by performing roadway and bridge construction inspections, materials testing, and documentation to ensure compliance with project plans and specifications. The CEI Inspector oversees or conducts inspections of asphalt, concrete, structural components, traffic control, and erosion control measures, and may lead junior inspectors or manage smaller projects such as resurfacing, striping, safety, and bridge maintenance work. Responsibilities include field measurements, computations, reporting, and coordinating with the Project Administrator to ensure

Cleveland, TN 37312 • (42 miles) • Full Time • 10/2/2026

Ascent Industries Co. is a specialty chemicals platform delivering differentiated, performance-driven chemical solutions to a diverse set of end markets. The Company develops, manufactures, and supplies tailored formulations and intermediates that enhance product performance and optimize industrial processes. The Company's core product portfolio includes surfactants, defoamers, lubricating agents, flame retardants, and specialty intermediates, offered in both petroleum-based and bio-based formulations. Ascent's products are used as critical ingredients and process aids in applications such as cleaning formulations, coating systems, oilfield production chemicals, agrochemical formulations, metalworking fluids, water treatment solutions, and industrial textiles.The Plant Manager IV applies a

Calhoun, GA 30534 • (29 miles) • Full Time • 10/1/2026

Atlanta Gear Works is located in Dawsonville, GA. We are looking for an experienced CNC Machinist to join our skilled team. Ideal candidatemusthave at least 3 years of prior machining experience. Must have experience in programming and ability to operate manual and CNC Lathes and Mills, and be able to read mechanical drawings. This position is for a machinist, not operator. If you meet all requirements, please apply! Schedule is on 1st shift, M-F 7am-3:45pm with overtime opportunity.We are a contract precision maintenance jobshop that services and repairs both large and small process critical gearboxes for a variety of industries.RESPONSIBILITIES:Must be able to machine parts from mechanical drawings.CNC work must include setup, programming (on Machine and in CAM), tool setup and operation

Benton, TN 37307 • (29.2 miles) • Full Time • 10/1/2026

CNC Manufacturing Programmer – Haas/SolidCAM Specialist Location: Benton, TNSchedule: Monday–Thursday, 6:30am–5:00pm (first or second shift) enjoy a four-day workweekPicture your day: you roll in at 6:30am, pull the print for a new component, and decide on the best strategy to machine it. You open SolidCAM to create toolpaths, head to a Haas mill or lathe to set tooling and work offsets, and run a careful prove-out. You inspect to GD&T, tweak code right at the control, and document everything so the next run is smoothand no one needs to call you at home. That’s life in a job shop where parts change often and resourceful problem-solvers thrive. What you’ll do Own jobs from programming through setup, prove-out, and documentation.Create SolidCAM toolpaths; edit programs at the machine control

Cumming, GA 30040 • (42.8 miles) • Full Time • 9/30/2026

Septic / Grease Pump Technician Cumming, GA / North Atlanta$25–$30+ hr DOEDirect Hire Opportunity with Superior Skilled TradesMonday–Friday | 7:30 AM–4:00/5:00 PMSuperior Skilled Trades is seeking experienced Septic / Grease Pump Technicians for direct hire opportunities in Cumming, GA. Higher pay may be available for candidates with extensive industry, lead, or supervisory experience.This is a hands-on field technician positionnot a traditional CDL driving job. Technicians operate their own pump truck and equipment while performing septic and grease pumping services at customer locations.Responsibilities Operate 2,500–4,000 gallon pump trucks.Locate, expose, pump, clean, and inspect septic systems.Operate a mini excavator and tow equipment.Perform digging, hose handling, and other physica

Cumming, GA 30040 • (42.8 miles) • Full Time • 9/29/2026

We are Hydro, Inc., a global, industrial pump engineering company with corporate headquarters in Chicago. As the largest independent pump rebuilder in the world, Hydro's provided engineering expertise, pump repair and support services to the industry since 1969.We have a great opportunity for a qualified Manual Machinistto join our team at our Cumming, GA. An excellent compensation and benefits package is available for qualified candidates.JOB SUMMARY:The Manual Machinist is responsible for fabrication, modification, and operation of industrial machine tools and parts to precise specifications. The Manual Machinist develops and maintains these tools and parts utilizing knowledge of mechanics, metal properties, layout, and machining procedures. You will be familiar with machining on equipme

Blue Ridge, GA • (2.9 miles) • Full Time • 9/28/2026

Meadowbrook Brands: We want YOU to have a seat at our table!Meadowbrook has been an established company since 1932, when founder Fred Weir Sr. opened his first restaurant to provide all the missing elements in our world today. His desire is to provide a place where people and families can come to get away from the troubles that this world may bring and to design a place that gives every person who walks through the doors a sense of belonging and hope that they matter.The Dairy Queen brand offers 3 varied entry positions: Service, Chill and GrillService: Front of House team, Drive Through, Dining RoomChill: Back of House, Preparation of all treats and ice creamGrill: Back of House, Preparation of all food menu itemsExpectationsBe an amazing example of the Dairy Queen brand and be profession

Cleveland, TN 37323-5722 • (39.8 miles) • Full Time • 9/28/2026

Description: Spring Valley began on a small family farm in Jackson, WI in 1961 and has grown into a leading manufacturer of fertilizers and ice melter products. From our 8 blending locations and multiple shipping locations, we serve a wide variety of customer markets including distributors, co-ops, and retailers throughout the United States and internationally. Spring Valley became a part of the Interoceanic (IOC) family of companies in 2022. Our company continues to grow and expand, which presents many new opportunities. Our Cleveland, TN plant is eagerly seeking Production Associates to join our team!Responsibilities include:Stacking 50lb bags on pallets & wrapping pallets for shippingMixing/blending material for fertilizer and ice melterRunning and monitoring machines to ensure safety a

Dalton, GA 30721 • (33.7 miles) • Full Time • 9/27/2026

Urgently Hiring Waterblast Technicians!C&H Industrial | 24/7 Availability | Growth OpportunitiesLooking for a hands-on job where every day is different? Ready to work hard, stay safe, and be part of a solid team? Welcome to the world of Industrial Cleaning at C&H Industrial!We’re looking for hardworking, safety-conscious Industrial Cleaning Technicians / Machine Operators who aren’t afraid to roll up their sleeves and tackle tough industrial jobs. This fast-paced, physically active role is perfect for candidates with experience in machine operation, warehouse work, manufacturing, construction, or industrial environments.You’ll operate high-pressure water blasters, industrial vacuums, and other heavy-duty industrial cleaning equipment to help keep facilities clean, safe, and running efficie

Dalton, GA 30719 • (37.2 miles) • Full Time • 9/26/2026

Job Title: Controls Systems EngineerJob DescriptionThis is a full-time, traveling position where you will be working on various projects for 3-6 months at each location. You will play a critical role in executing automation commissioning and validation protocols, and work closely with internal engineers and clients to deliver state-of-the-art control systems aimed at improving efficiency, product quality, and profitability in process manufacturing.ResponsibilitiesExecute automation commissioning and validation protocols.Troubleshoot and remediate commissioning and validation non-conformances.Collaborate with internal engineers and clients in a team environment.Define and implement programmable logic controller (PLC) configurations.Conduct testing and on-site commissioning and qualification

Calhoun, GA • (42.1 miles) • Full Time • 9/23/2026

Apply now: Production Planner, Onsite - Calhoun, GA. Start date is ASAP (targeting 8/5) for this 6-month Contract-to-Hire position. Job Title: Production Planner Location-Type: Onsite - Calhoun, GA (5 days/week, M-F; occasional team meetings in Chatsworth, GA approximately 1x/month) Start Date: ASAP (targeting 8/5) Duration: Contract-to-Hire, 6 months Compensation Range: $46.96/hr - $55.25/hr Benefits: Eligible for Health, Dental, Vision, and 401K Visa Sponsorship: Not eligible for visa sponsorship Job Description:This role is responsible for managing a high-volume purchasing and vendor planning operation, ensuring purchase orders are executed accurately, vendor relationships are maintained, and cross-system data integrity is upheld across a complex, multi-SKU supply chain environment. Job

Dalton, GA 30721 • (33.7 miles) • Full Time • 9/17/2026

Company Description Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste and mitigate loss, advance sustainability, circularity and transparency and better connect brands and consumers. We design and develop labeling and functional materials, radio-frequency identification (RFID) inlays and tags, software applications that connect the physical and digital and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide including home and personal care, appa

Cleveland, TN • (39.8 miles) • Full Time • 9/17/2026

OverviewWe’re hiring a Production Planner to join our advanced manufacturing operation in the Chattanooga–Cleveland area.We manufacture advanced products supporting aerospace, defense, space, additive manufacturing, and other highly controlled applications. This role sits at the center of production and is responsible for turning customer demand, material availability, equipment capacity, labor availability, and operational priorities into schedules the manufacturing team can actually execute.You’ll own production planning across batch-oriented and job-shop operations, including raw-material preparation, processing, manufacturing, testing, packaging, warehousing, and shipping. You’ll also manage material requirements, inventory planning, ERP/MRP data, and day-to-day coordination with Opera

Blue Ridge, GA 30513 • (0 miles) • Full Time • 9/15/2026

Shop TechnicianStrickland Brothers 10 Minute Oil ChangeJoin a thriving team where your growth is our priority!At our company, your career path is not just a journey; it’s a fast track to success. We’re committed to advancing our employees' careers and recognizing talent at every level.As a Shop Technician, you’ll be part of a fast-paced, team-driven environment where you learn real skills, work with your hands, and see the impact of your work every day. Many of our leaders started right here in entry-level roles and built successful careers through hands-on learning, teamwork, and performance. This is more than a job. It’s a chance to build a career.If you’re ready to elevate your career and make a meaningful impact, we want you on our team!Why Team Strickland:We invest in our team members

Dahlonega, GA 30533 • (24.5 miles) • Full Time • 9/15/2026

Shift- 3rd - M-F- 11pm-7amPay: $19/hrKey DutiesInspection & Documentation· Measure parts to verify correct length and dimensional accuracy using tape measures, calipers, and go/no-go gauges.· Perform final visual inspection of all parts on all four sides for defects, dimensional nonconformances, and overall quality concerns.· Identify, quarantine, and report visual defects, dimensional nonconformances, or missing components to Quality Technicians and Production.· Ensure parts meet StruXure quality standards prior to packaging and release.· Certify each job using a QC stamp to verify part accuracy and quality.· Take final inspection photos and log required documentation.· Ensure job documentation and labels are accurate and complete prior to shipment.· Support quality operations and assist

Cleveland, GA 30528 • (34.3 miles) • Full Time • 9/15/2026

Benefits:401(k) matchingPaid time offTraining & development We are looking for someone to run Mazak Lathes. We need someone that can program, setup, and run a Mazak Lathe. Mazak experience is a big bonus. If you don't have CNC experience, this job isn't for you.

Canton, GA • (41.1 miles) • Full Time • 9/15/2026

Company information:A leading supplier of plastics and metal fastening products and technologyProducts include: Plastic and metal fasteners for the automotive market. This includes trim fasteners; fuel supply, springs, fuel cut valves, fuel pump brackets, and interior auto trim partsProcesses include: Plastic injection molding, metal stamping, wire bending, and assemblyEquipment includes: 100+ Injection molding machines, progressive stamping machines, and heat treatMaterials include: PP, Acetal, Nylon, PC-ABS, and TPERequirements:Bachelor's Degree (BSME)Manufacturing background (preferably automotive)Speak JapanesePreferred skills:2-5 years of experience with Injection molding and or Metal Stamping (preferably automotive)Project Management skills to manage projects from quotation to implem

Dalton, GA 30721 • (33.7 miles) • Full Time • 9/15/2026

Join Our Team Are you detail-oriented and eager to start or continue your career in chemical manufacturing? We're looking for a Chemical Manufacturing Technician at our bustling Rome, GA location. This role is essential to our success, as you'll be overseeing and conducting chemical production processes with precision. If safety and efficiency in a dynamic environment excite you, apply now! Your Role Handle and supervise the chemical production machinery to ensure smooth operations and compliance with safety standards.Follow established SOPs and prioritize safety procedures to maintain workplace safety.Perform regular checks on machinery, identifying and addressing potential malfunctions.Keep thorough records of production activities, including quality control and batch logs.Contribute to

Cumming, GA 30040 • (42.8 miles) • Full Time • 10/5/2026

Project Engineering Manager, Food ManufacturingAs a trusted authority in project management with equipment automation, this role tackles the most complex challenges, turning visionary concepts into reality.Position Responsibilities:·Responsible for developing preliminary designs and specifications for engineering and materials, while also preparing project cost estimates.·Conduct research, feasibility studies, and economic studies to ensure the design is both viable and cost-effective.·Determine design criteria based on required standards and codes, and validate field work, creating as-built drawings to document the final outcome.·Review and check engineering projects for accuracy and soundness and manage project execution by guiding vendors and contractors.·Coordinate project schedules wi