Conyers, GA 30012 • (38.1 miles) • Full Time • 10/3/2026

Job SummaryThis position is responsible for supervising the engineering and construction operations of the Stormwater Management Department. This includes personnel management, engineering, design, permitting, construction management, inspection, procurement, and accounting for all stormwater infrastructure projects.Essential FunctionsEssentialFunctions:These are intended only as illustrations of the various types of work performed. The omission of specific duties does not exclude them from the position.Manages and directs all engineering and construction operations, personnel, consultants, and contractors.Supervises and facilitates planning, procurement, contract administration, surveying, engineering, plan review, permitting, easement acquisition, construction, project management, and in

Lawrenceville, GA • (44.9 miles) • Full Time • 10/6/2026

Electronic / Ankle Monitoring Field InstallerLocation: Atlanta, GA / Lawrenceville, GAWeekly salaryFull time with overtime opportunityHealth insurance401k retirement benefitsPaid vacationCompany vehicle when on dutyA & A All County Monitoring Services, Inc. is looking for motivated and energetic individuals to become part of our team, servicing the criminal justice needs of the metro Atlanta area. This assignment is shift work and would involve traveling to local jails and government offices to install and activate ankle- and wrist-worn GPS electronic monitoring devices to individuals along with interagency courier services. Personnel are provided use of a company car and all necessary equipment and training.Requirements:• Clean criminal background - must be able to pass a background check

Athens, GA • (26.4 miles) • Full Time • 10/11/2026

implementation and initial stabilizationSupport the September ramp-up and October implementation of inbound and outbound data processes.Ingest, transform, validate, and reconcile Gainwell, Arcadia, DHCS, and other approved data feeds within Acentra’s standard claims and eligibility environment.Support Atrezzo-related interfaces or reportable extracts, as defined during implementation.Establish data-quality, refresh, completeness, and reconciliation controls for PRISM, case creation, and reporting.Participate in data-exchange workstreams and daily implementation huddles as needed.Plan for an extension through initial production analytics and data stabilization if file specifications, interface requirements, or source-of-truth decisions are not finalized by the end of implementation.Requirem

Comer, GA 30629 • (37.9 miles) • Full Time • 10/10/2026

Manufacturing Engineer – Composites Manufacturing Location: Comer, GeorgiaPosition Type: Full-Time | On-SiteDepartment: Engineering The Opportunity R12 Talent is recruiting a Manufacturing Engineer for an established manufacturing operation in Comer, Georgia.This is an excellent opportunity for an engineer who enjoys getting involved on the production floor, solving manufacturing challenges, and developing practical solutions that improve quality, efficiency, and overall production performance.The position offers a varied mix of mechanical engineering, process development, tooling design, production support, and continuous improvement, with the opportunity to take ownership of engineering projects from initial concept through to implementation.Working closely with production, quality, engi

Lawrenceville, GA • (44.9 miles) • Full Time • 10/10/2026

Senior Electrical Engineer – PCB & Hardware DesignEngineering | Lawrenceville, GA | On-Site | Full-TimeAbout the RoleRad Source Technologies designs and manufactures advanced x-ray systems used worldwide in blood, cell, animal, insect, and nondestructive testing (NDT) applications. As a Senior Electrical Engineer, you will own the design of the printed circuit boards, power distribution circuits, and electronic control systems inside our x-ray systems, from concept through commercialization, working hands-on in our Lawrenceville, GA facility alongside a multi-disciplinary engineering team.This is an on-site position. Remote or hybrid arrangements are not available for this role.What You'll DoDesign, modify, review, and approve electrical schematics and multi-layer PCB layouts using Altium

Conyers, GA 30013 • (35.4 miles) • Full Time • 10/7/2026

Title: Field Service Technician I.Grade: 6.Position Summary & Key Areas of Responsibility:Position Summary:Are you a Field Technician? Field Engineer? Service Technician? Or do you want to start a career in this field? Are you tech savvy with a good mechanical aptitude and feel your skills are transferrable? Can you help us to provide best in class service? Do you want to work with some of the largest retail customers in the industry?NCR Voyix is looking for Field Service Technicians!Pay and Benefits:Hourly Pay Range: $19.00 to $21.00, depending on location and experience levels.Overtime available at time and a half.Benefits:7 paid holidays and 6 paid floating holidays.Paid vacation – up to 80 hours your first year.401K savings and retirement plan.Company-provided business-use-only vehicle

Bogart, GA 30622 • (26.2 miles) • Full Time • 10/6/2026

Description: Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career!We are seeking motivated and dependable Engineering Technicians to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materialsincluding soil, concrete, and masonryin accordance with ASTM standards. Technicians are responsible for observing construction activities for compliance with

Lawrenceville, GA 30046 • (44.8 miles) • Full Time • 10/6/2026

Purpose of Role Rehrig Pacific Company’s Plant Engineering Interns are an integral part of our operations and are responsible for identifying and driving solutions that improve our performance and operational costs. Plant Engineering Interns are responsible for planning, design and implementation of equipment, machinery, and automation. They are expected to collaborate with other plant resources, and to create safe, stable, and reliable manufacturing processes and systems through the analysis of data and the application of sound engineering practices. Plant Engineering Interns should be driven by the pursuit of operational excellence!Areas of Accountabilities Leads or supports technical work / activities within the plant (engineering, maintenance, tooling, troubleshooting, etc)Maintain in-

Covington, GA 30014 • (26.3 miles) • Full Time • 10/5/2026

The Mechanical Engineer II will lead complex mechanical engineering projects, from design through implementation. This role involves high-level technical decision-making, as well as mentoring and overseeing junior and mid-level engineers. The Mechanical Engineer III will collaborate with cross-functional teams and clients to ensure the successful delivery of projects.Key Responsibilities:•Lead the design, development, and optimization of advanced mechanical systems and products.•Oversee and manage large-scale engineering projects, ensuring adherence to timelines, budgets, and specifications.•Provide high-level technical expertise and strategic direction on engineering challenges.•Conduct advanced simulations, testing, and analysis to optimize designs for performance and reliability.•Review

Covington, GA • (28 miles) • Full Time • 10/5/2026

Company DescriptionAbsolics Inc. is a U.S.-based subsidiary of SKC Co., Ltd., pioneering the commercialization of Glass Core Substrates (GCS) for next-generation semiconductor packaging. Our Covington, GA facility is the center of our U.S. NPI and manufacturing operations, developing glass substrate solutions for AI accelerators, HPC SoCs, and advanced chiplet architectures. We are growing our NPI team to accelerate product development and customer launch programs with tier-1 fabless and OSAT customers.Job Title: NPI Process EngineerLocation:Covington, GAJob Type:Full-TimePosition Summary:The NPI Engineer owns new Glass Core Substrate product development from initial customer engagement through product launch. Working closely with customer engineering teams, this role defines product speci

Conyers, GA 30013-5003 • (37.1 miles) • Full Time • 10/5/2026

About Two Eight:Embarking on a journey with Two Eight as a field service technician is all about rolling up your sleeves and diving into a world where grit, safety, and integrity take center stage. As blue-collar warriors in the drilling and blasting field, we live and breathe hard work, and that's exactly what these companies are all about. Picture a workplace where your safety is a top priority amidst the challenging tasks we handle daily. You're not just a number but a valued member of a tight-knit team focused on bringing our vision, "To build the best business for the best people to live their best lives," to life every day. Our commitment to integrity means you can trust the folks you work alongside, creating an environment where everyone's got your back. So, if you're ready to join

Jackson, GA 30233 • (40.1 miles) • Full Time • 10/5/2026

Quanex is looking for a Senior Process Engineer to join our team Jackson, GA.The Senior Process Engineer will lead the development and optimization of manufacturing processes to achieve enhanced efficiency, quality, and productivity. This role involves utilizing advanced data analysis, communication with cross-functional teams, and driving continuous improvement initiatives to ensure compliance with regulatory standards and industry best practices.We Offer You!Competitive SalaryBonus Potential401K with 5% company match, yours to keep after 2 years15% immediate return if you participate in the company’s ESPPMedical, Dental & Vision PlansEmployer paid disability plans and life insurancePaid Time Off & HolidaysVarious Work SchedulesTuition support for degree and continuous educationEmployee R

Lawrenceville, GA • (44.9 miles) • Full Time • 10/5/2026

Job Summary:The Company is looking for a bi-lingual (Japanese/English) Controls Engineer tojoin our Thermal Engineering team. The Controls Engineer will use their knowledge in controlsystems, automation, and instrumentation to optimize industrial processes, enhance operationalefficiency, ensure safety and reliability, and drive technological innovation across variousprocesses. This position will use their Japanese/English bilingual language skills tocommunicate with global teams for technology strategies and alignment.The Controls Engineer Will:- Develop control system architectures, including hardware and software components, basedon project requirements and specifications.- Design and implement control algorithms, such as PID controllers, state-space controllers, or advanced control tech

Monticello, GA 31064 • (27.4 miles) • Full Time • 10/3/2026

About the Company: The Trezz Group is a full service commercial and industrial door company with clients all over the US. With over 30 years of experience and a commitment to excellence, we are the preferred installer for several hangar door manufacturers. Trezz has extensive experience with aircraft hangar doors, serving private hangars, military bases, and airports across the country. We offer competitive wages, paid holidays, PTO, Medical, Vision and Dental insurance, boot and tool allowances, and weekly pay via direct deposit. Our office is based in Monticello, GA but our crews work all over the US. We are currently hiring for technicians to install hangar doors at airports across the country.Job responsibilities:Follow instructions of Crew lead or Superintendent.Perform service and in

Conyers, GA • (37.1 miles) • Full Time • 10/3/2026

Who we are:Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive.We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment.Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mitsubi

Athens, GA • (26.4 miles) • Full Time • 10/3/2026

As anAutomation and Controls Engineerat RWDC Industries, will require you to lead the design, development and engineering of new Automation & Controls Systems technical expertise involved in the production of our biodegradable material (PHA). Your responsibilities will include providing the engineering leadership to design system requirements analysis, hardware design/specification, programming, integration, verification, and commissioning of controls systems for a new plant operation. The successful candidate will have substantial automation and controls experience, knowledge of industry standards and current technologies, outstanding communication skills and the ability to meet deliver project requirements. As a technology-driven company we are looking for a leader who wants to challenge

Jefferson, GA 30549 • (39.2 miles) • Full Time • 10/3/2026

Who We Are: From Georgia. For Georgia.Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest assetour employees.What You Will Be Doing: As a Field Service Truck Technician you will perform truck repairs at customer facilities.Primary Responsibilities:Works in a neat and orderly manner, maintaining a safe work environment and a constant focus on completing the task at hand safely.Proficiently and accurately perform maintenance, d

Winder, GA • (35.8 miles) • Full Time • 10/2/2026

Job title: Sr. Electrical & Controls Engineer (Division Level)Job Summary:The Senior Electrical and Controls Engineer provides Electrical Controls Engineering for the implementation of Capital Projects for JM's Insulation Systems (IS) Manufacturing Operations. The position will have a wide range of roles including being an internal consultant on electrical systems to a hands-on project manager or leader in implementing electrical control projects. This role will be responsible for developing, scoping, coordinating, justifying, implementing, and managing from start to finish a broad range of industrial electrical and control system manufacturing projects, including scope documents, engineering calculations and designs, specifications, cost estimates, schedules, project justifications, and p

Milledgeville, GA • (34 miles) • Full Time • 10/1/2026

PSC INDUSTRIESLocation: Milledgeville, GeorgiaJob title: Continuous Improvement EngineerReports to: General Manager / Plant ManagerExempt Type of position: Full-timeHours_40 +hours/weekStart Time: 8:00 amGeneral Description:· Process improvement goals and packaging proposals.· Cost Reduction Program.· Supports Quality.· Work and communicate with a team to continuously improve quality, safety, efficiency and productivity.· Conduct Time Studies· Program CNC equipment· Create tooling layouts. Order specialty tooling.· Support Sales, Quality and Manufacturing goals.Detailed Description:· Follow the C.I.P. philosophy. Meet yearly cost savings goal. Involve employees with cost savings projects.· Conduct LEAN APPLICATION projects (including Kaizen events, Kanban systems, 5S, Process Flow, Product

Athens, GA 30601 • (29.8 miles) • Full Time • 10/1/2026

Location:NationwideWhy CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on-the-job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee’s hard work and determination and REWARD results all while having fun!Our mission is to make life better by connecting people through innovative communication systems.We are seekingField Walkout Engineers who will perform walkouts for an entire town and/or subdivision to create field notes for new or e

Athens, GA 30601 • (29.8 miles) • Full Time • 9/29/2026

Job Title: Aseptic Manufacturing Validation EngineerLocation: Athens, GAType: 12 month contractCompensation: $45-48/hour, depending on qualificationsWork Model: Onsite – onsiteHours: 40/weekOverviewSupport validation activities for aseptic manufacturing systems, equipment, utilities, and facilities. This role is responsible for qualification, protocol execution, documentation, compliance support, and ongoing validation of production and utility systems within a cGMP-regulated biopharmaceutical environment.ResponsibilitiesExecute validation and qualification activities for autoclaves, depyrogenation tunnels, filling lines, HVAC systems, cold rooms, freezers, warehouses, and pharmaceutical utilities. Perform smoke studies, support media fill qualifications, and provide subject matter experti

Madison, GA 30650 • (6.2 miles) • Full Time • 9/27/2026

POSITION SUMMARY: The Civil Engineer in Training will be on a project manager track and work under the close supervision of a licensed Civil Engineer. The EIT will maintain responsibility for performing design work related to site planning and land development and have the opportunity for continued growth as a project manager. The position offers the ability to work in the office and remotely so long as certain objectives are met. ESSENTIAL DUTIES AND RESPONSIBILITIES:The essential functions include, but are not limited to the following:Perform design work focused on on-site planning and land development, including roadway plans and profiles, water resources, grading, earthwork analysis, specifications, and preparation of cost estimates.Complete diagrams, schematics, layouts, multi-view, a

Athens, GA 30601 • (29.8 miles) • Full Time • 9/27/2026

Benefits:Flexible scheduleOpportunity for advancementProfit sharingThis Is Not Your Average Tech Job Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job ResponsibilitiesPerform a wide range of technical tasks including but not limited to: OS installations, hardware diagnostics, and software setupStru

Milledgeville, GA 31061 • (36 miles) • Full Time • 9/27/2026

PSC INDUSTRIESLocation: Milledgeville, GeorgiaJob Title: Continuous Improvement EngineerReports to: General Manager / Plant ManagerExempt Type of Position: Full-time Hours: 40 +hours/week Start Time: 8:00 amThis is not a work from home position. This position requires you to be able to commute the Milledgeville, GA.General Description:Process improvement goals and packaging proposals.Cost Reduction Program.Supports Quality.Work and communicate with a team to continuously improve quality, safety, efficiency and productivity.Conduct Time Studies.Program CNC equipment.Create tooling layouts. Order specialty tooling.Support Sales, Quality and Manufacturing goals.Detailed Description:Follow the C.I.P. philosophy. Meet yearly cost savings goal. Involve employees with cost savings projects.Conduc

Athens, GA 30605 • (23.4 miles) • Full Time • 9/25/2026

About UsIMI Industrial Services Group is a full service, total solutions, industrial contractor. Established in 1988 in Watkinsville, Georgia, IMI has over 30 years of success in the Industrial construction industry. We have three satellite offices in Augusta, Covington, and Winder, GA. IMI supports manufacturers throughout most of the Southeast and we are expanding rapidly; big enough to have all the necessary resources, but small enough to give genuinely helpful personalized attention to everyone who puts their trust in us.Why IMI?Safety, Integrity, Quality, and Production will always be met at IMI.We have maintained steady growth and continually strive to advance.Founded on family values and principles.Focused on work/life balance.Rewards: Competitive salary packagesHealthcare benefitsP

Comer, GA 30629 • (37.9 miles) • Full Time • 9/25/2026

Position SummaryWe are seeking an experienced Manufacturing Engineer to support development, optimization, and continuous improvement of our composite manufacturing processes, tooling, and production systems with hands-on involvement.The ideal candidate combines strong mechanical engineering fundamentals with practical manufacturing experience to be able to manage multiple engineering projects and priorities. This person will work closely with engineering, technicians, production, quality, and suppliers to translate engineering designs and changes into robust, repeatable, and efficient manufacturing processes.This is a hands-on engineeringposition. The engineer should expect to spend meaningful time on the manufacturing floor, working with technicians, troubleshooting processes, evaluating

Conyers, GA 30012 • (38.1 miles) • Full Time • 9/25/2026

As a leading mechanical contractor serving the Southeast and Midwest, Batchelor & Kimball takes pride in partnering with our clients to deliver excellent results from engineering and construction to operations and maintenance. We offer design/build and turnkey construction services, including teaming with subcontractor partners. If you are looking to grow your career and thrive in a team environment, then we invite you to apply for this position.The Controls Solutions Engineer is responsible for supporting the company’s overall success in the HVAC Controls Department. The Controls Solutions Engineer is responsible for representing the controls department on construction, retrofit, service projects and supporting the overall success of the department.Job Responsibilities/Accountabilities:Pr

Athens, GA 30601 • (29.8 miles) • Full Time • 9/21/2026

W&A Engineering is a growing, multidisciplinary firm offering civil engineering, landscape architecture, surveying, and program management with offices across the Southeast. Known for our innovative design, efficient engineering, and professional service, W&A is the trusted partner of community leaders and developers driving sustainable growth throughout the United States. We are seeking a Director of Civil to oversee our civil department in Athens, GA. This professional must have experience within the civil site design industry and be able to lead a team of engineers in addition to driving business within the market. From working with clients and across company departments to site visits to producing plans, you’ll be involved in many aspects of the land development process.Roles and Respo

Lawrenceville, GA • (44.9 miles) • Full Time • 9/19/2026

Qualifications 1. AGF onsite deployment, debugging, troubleshooting and customer training in overseas project; 2. AGF operational status tracking, recording and summarizing in overseas project onsite, and regularly reporting to project manager; 3. Responsible for project documentations; 4. After-sales repair and maintenance; 5. Develop and follow up project schedule plan for overseas projects, communication and coordinate with customers for technical problems; 6. Timely feedback customer requirement, constantly improve project management skills and improve customer service level; Complete other tasks assigned by the manager; Requirements 1. Familiar with CAD, SolidWorks, Excel, Word, PPT and other office software; 2. Good learning ability; 3. Good communication skills is preferred 4. Enthu

Covington, GA 30014 • (26.3 miles) • Full Time • 9/17/2026

MANUFACTURING PROJECT TECHNICIAN (ENGINEERING)Come join our team! Clairon Metals has an immediate opening for an experienced Project Technician. We are looking for a hands-on person who will interact with customers to develop new business and build partnerships. Responsible for working with the Engineering Manager to effectively launch new parts and tooling from kickoff to production release. This is a salaried exempt position.Clairon Metals offers: Great Work-Life Balance, Flexible Scheduling 401(k) Retirement Plan with Company Match Generous Paid Time Off (PTO) Paid Holidays from Day 1 Full array of company benefitsPreferred Qualifications:· Must have at least 3 years of related experience as a Project Tech, preferably in a manufacturing environment.· Associate’s or Bachelor’s degree pre

Athens, GA • (26.4 miles) • Full Time • 9/17/2026

Velofi is a leader in advanced technology solutions, focusing on integrated security, communications, and fiber optic infrastructure. Our commitment to exceptional service sets us apart in the industry. We empower multifamily properties, commercial enterprises, and residents to thrive in the digital age through innovative and reliable solutions. Joining Velofi means being part of a team dedicated to enhancing connectivity and security while driving transformative projects. We strive to build lasting relationships as a trusted partner to our clients, enhancing connectivity, security, and operations at every level.Low Voltage Field Technician Summary:We are seeking a skilled and motivated Low Voltage Field Technician to join our team. In this role, you will be responsible for the installatio

Madison, GA 30650 • (6.2 miles) • Full Time • 9/15/2026

EXEMPT: Yes HOURS: 6:00 am – 4:30 pm, Monday-Thursday, Occasional Fridays & Saturdays as neededLOCATION: Madison, GA SHIFT: 1stDEPARTMENT: ManufacturingREPORTS TO: Continuous Improvement ManagerSUMMARY: The Manufacturing Process Engineer develops, evaluates, and improves manufacturing methods, using knowledge of assembly & test processes, tooling and production equipment capabilities, assembly methods, and control systems. Interaction and involvement with multiple functional groups within the plant is necessary to successfully execute the requirements of this position.QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability

Bogart, GA 30622 • (26.2 miles) • Full Time • 9/15/2026

Description: Company: Ulm Automotive LLCDepartment: EngineeringReports to: General ManagerLocation: Bogart, GA (on-site)Employment type: Full-time, exemptDirect reports: None; works alongside the President, Engineering Consultant, the Drafting Engineer, and outside design and engineering partnersPosition SummaryThe Research & Development Engineer owns what comes next. Ulm builds luxury passenger vehicles on an incomplete Mercedes-Benz Sprinter chassis, and this role takes new interior systems, materials, and features from idea to a validated design that Production can build and the compliance file can defend: prototype builds, testing, data, and a clean handoff to drawings and BOMs.The work spans acoustic and thermal materials, seating and mounting structures, lighting and power systems, c

Athens, GA 30601 • (29.8 miles) • Full Time • 9/15/2026

Seeking Professional Licensed Engineer with 5 – 15 years of experience in the water industry. Background and experience in municipal or industrial water, wastewater, reclaimed water, stormwater, detailed design, utility management, operations and maintenance, and/or program management are desired. Hazen and Sawyer is a stable, growing, employee-owned company where engineers and scientists are valued. We are committed to providing technically superior solutions to our clients for all things water.Education requirements are a B.S. degree in Environmental, Civil, Mechanical or Chemical Engineering or commensurate hands-on experience that provides the candidate with the knowledge to complete the specific duties. Position requires a positive attitude along with excellent written communication a

Bogart, GA 30622 • (26.2 miles) • Full Time • 10/6/2026

Description: Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career!We are seeking motivated and dependable Engineering Technician Aides to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materialsincluding soil, concrete, and masonryin accordance with ASTM standards. Technicians are responsible for observing construction activities for compliance

Athens, GA • (26.4 miles) • Full Time • 10/3/2026

CAD Design/Drafter, Industrial Plant-Piping-Pressure Vessel-MachineryThis Immediate Opening as an CAD Design/Drafter withRWDC Industries, you will play a crucial role in our engineering team, supporting the design and implementation of industrial plant & piping systems for various projects. This position is ideal for someone who is hard charging and willing to grow in a collaborative environment while contributing to innovative solutions in industrial plant and piping design.ResponsibilitiesAssist in the development of piping and industrial plant layouts designs using CAD software, ensuring compliance with industry standards and project specifications.Collaborate with senior engineers to analyze piping systems and identify optimization opportunities.Support the preparation of detailed pipi

Covington, GA • (28 miles) • Full Time • 9/30/2026

Job Title: R&D Engineer - Dielectric and Polymer Materials Expert for Advanced Packaging applicationsLocation:Covington, GAJob Type:Full-TimeAbout Us:Absolics is a leading provider of advanced packaging technologies and services, offering scalable solutions for businesses of high-performance computing. We offer smart, innovative services to dozens of clients globally. By dedicating our efforts to establishing large glass substrates with built-in active and passive elements, our goal is to provide significant improvement in signaling characteristics and power consumption compared to existing solutions.Job Description:You will lead efforts to evaluate, down select and integrate the various Advanced Packaging Organic and Polymeric materials critical to advanced packaging process flows, with r

Jackson, GA 30233 • (40.1 miles) • Full Time • 9/29/2026

Quanex is looking for a Manufacturing Engineer to join our team in Jackson, GA.The Manufacturing Engineer will be responsible for controlling multiple project activities in the areas of product/process design, product/process modifications, manufacturability studies, plant usage, plant layouts, capital investments and engineering documentation.We Offer You!Competitive SalaryBonus Potential401K with 5% company match, yours to keep after 2 years15% immediate return if you participate in the company’s ESPPMedical, Dental & Vision PlansEmployer paid disability plans and life insurancePaid Time Off & HolidaysVarious Work SchedulesTuition support for degree and continuous educationEmployee Resource Groups focused on employee empowermentWhat’s attractive about the Manufacturing Engineer position?

Covington, GA 30014 • (26.3 miles) • Full Time • 9/25/2026

As a Controls Engineer Level 3, you will be a senior member of the controls engineering team, responsible for leading complex projects and providing technical expertise and guidance. You will oversee the design, development, and implementation of advanced control systems, ensuring compliance with industry standards and best practices. This role requires extensive experience in control system engineering and strong leadership skills.Responsibilities:1. Lead the design and development of complex control systems for industrial applications.2. Provide technical leadership and mentorship to junior engineers and project teams.3. Collaborate with customers and stakeholders to define project requirements and specifications.4. Develop control system architectures and design solutions to meet projec

Comer, GA 30629 • (37.9 miles) • Full Time • 9/23/2026

Position SummaryWe are seeking an Engineering Technician to support development, optimization, and continuous improvement of our composite manufacturing processes, tooling, and production systems with hands-on involvement.The ideal candidate combines strong mechanical engineering fundamentals with some practical experience or internship. This person will work closely with engineering, technicians, production, quality, and suppliers to translate engineering designs and changes into robust, repeatable, and efficient manufacturing processes.This is a hands-on engineering position. The engineer should expect to spend meaningful time on the manufacturing floor, working with technicians, troubleshooting processes, evaluating prototypes, and implementing improvementsnot exclusively working at a d

Dacula, GA 30019 • (41.1 miles) • Full Time • 9/19/2026

Who We Are: From Georgia. For Georgia.Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest assetour employees.What You Will Be Doing: As a Preventative Maintenance Field Service Technician, you will be performing preventive maintenance on various types of customer/rental machines as per machine guidelines in a safe and timely manner on customer job sites.Primary Responsibilities:Drive to customer’s job site daily to complete p