SEARCH
GO
Skilled & Trades Jobs
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
What you will doJohnson Controls Inc. is looking for forward-thinking entry level talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for entry level skilled HVAC Technicians who have experience with air cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for entry level startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 1 year of practical working experience on air cooled or large roof top ducted units with some HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.
Full Time
10/25/2024
Conley, GA 30288
(10.8 miles)
Req ID:451049Address: 4136 Old McDonough Rd Conley, GA, 30288Benefits:* Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.
Full Time
10/29/2024
Avondale Estates, GA 30002
(9.9 miles)
At Jabil we strive to make ANYTHING POSSIBLE and EVERYTHING BETTER. We are proud to be a trusted partner for the world's top brands, offering comprehensive engineering, manufacturing, and supply chain solutions. With over 50 years of experience across industries and a vast network of over 100 sites worldwide, Jabil combines global reach with local expertise to deliver both scalable and customized solutions. Our commitment extends beyond business success as we strive to build sustainable processes that minimize environmental impact and foster vibrant and diverse communities around the globe.Do you have expertise in repairing Injection Molding equipment Jabil has an exciting opportunity for experienced Maintenance Technicians in Atlanta, GA!How will you make an impact In this role, you will be performing complex maintenance and repairs on electrical, mechanical, pneumatic, and/or hydraulic plant equipment including injection molding machinery. Day and Swing Shifts availablePay: $30 DOESign-On Bonus Up to $1,500 DOECompetitive Benefits including Profit Sharing!What will you do Performs routine preventive maintenance and emergency mechanical, hydraulic, pneumatic, and electrical maintenance on production systems and equipment, using knowledge of electrical-mechanical devices, circuitry, electronics, motors, wiring diagrams, schematics, and blueprints.Troubleshoots, repairs, aligns, calibrates, inspects, and tests a variety of production systems and equipment.Performing hydraulic, pneumatic, high voltage electrical, and mechanical repairs on Injection molding equipment.Set up assembly line equipment within established parameters.Assists in installing new equipment and in moving equipment to new locations.Disassembles machines and parts and adjusts repairs or replaces defective parts and materials.Uses a variety of basic hand and power tools and equipment including hand drill, bench grinder, and band saw.Instruct the Production Team on the proper use of equipment.Maintains appropriate maintenance and repair logs.Cleans and lubricates parts and equipment as scheduled.Learns all aspects of machine maintenance and becomes cross-trained in all areas of molding/assembly equipment.Requisitions parts needed for completion of preventive maintenance responsibilities.Support all company safety and quality programs and initiatives.Other responsibilities may be assigned from time to time as needed, based on the evolution of the company and therequirements of the department/position.How will you get here Education:High School Diploma/GED.Experience:5 years of experience in industrial maintenance.Maintenance experience repairing plastic injection molding equipment is required.Requires solid experience in mechanical, electrical, and pneumatic principles and systems.Knowledge, Skills, Abilities:Solid knowledge of mechanical equipment and electrical and hydraulic drawings. Mechanical and electrical troubleshooting, diagnosis, and repair.Ability to read and write English and interpret documents such as technical manuals, blueprints,safety rules, operating instructions, and procedure manuals.Knowledge and ability to use relevant hand tools in the repair of equipment.What does Jabil offer Along with growth, stability, and the opportunity to be challenged, Jabil offers a competitive benefits package that includes:Medical, Dental, Prescription Drug, and Vision Insurance with HRA and HSA options401K matchEmployee Stock Purchase PlanPaid Time OffTuition ReimbursementLife, AD&D, and Disability InsuranceCommuter BenefitsEmployee Assistance ProgramPet InsuranceAdoption AssistanceAnnual Merit IncreasesCommunity Volunteer OpportunitiesApply Today!BE AWARE OF FRAUD: When applying for a job at Jabil you will be contacted via correspondence through our official job portal with a jabil.com e-mail address; direct phone call from a member of the Jabil team; or direct e-mail with a jabil.com e-mail address. Jabil does not request payments for interviews or at any other point during the hiring process. Jabil will not ask for your personal identifying information such as a social security number, birth certificate, financial institution, driver’s license number or passport information over the phone or via e-mail. If you believe you are a victim of identity theft, contact the Federal Bureau of Investigations internet crime hotline (www.ic3.gov), the Federal Trade Commission identity theft hotline (www.identitytheft.gov) and/or your local police department. Any scam job listings should be reported to whatever website it was posted in.Jabil, including its subsidiaries, is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, veteran status, or any other characteristic protected by law.Accessibility AccommodationIf you are a qualified individual with a disability, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access Jabil.com/Careers site as a result of your disability. You can request a reasonable accommodation by sending an e-mail to or calling with the nature of your request and contact information. Please do not direct any other general employment related questions to this e-mail or phone number. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.
Full Time
10/25/2024
Atlanta, GA 30336
(24.6 miles)
Electrical TechnicianAs a Plastipak Electrical Technician, you will be responsible for maintaining, servicing, and troubleshooting equipment and site property; making adjustments and/or mechanical/electrical repairs to the machines and equipment in a safe, efficient manner. You'll join our team of collaborative associates focused on safety and producing the best quality packaging in the industry.We Offer Advancement: We prioritize promotion from within!Rewards: We enjoy premium pay & an excellent benefits program!Convenience: Our food-grade clean & climate-controlled facility is located right off Fulton Industrial Parkway, at the crossroads of I-20 and I-285, in the West side of Atlanta!Stability: We’ve been in the community for many years & offer job stability through market uncertaintyYou WillMaintain and service machinery at the site.Ensures operation of electrical systems and equipment by completing preventive maintenance requirements on 3-phase motors, conveyors, programmable controllers, transformers, voltage regulators, and machinery wiring; following electrical code, manuals, schematic diagrams, blueprints, and other specifications; troubleshooting.Repairs electrical systems and equipment by diagnosing malfunctioning apparatus, such as transformers, motors, and lighting fixtures; determining faulty wiring; inspecting and testing malfunctioning machinery.Maintains electrical equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt.Repairs and replaces faulty electrical components by using testing equipment and hand tools to install relays, switches, motors, printed circuit boards, and position-sensing devices.Programs automated machinery by operating, testing for malfunctions, and verifying repairs.General maintenance duties to maintain the site.Follows all safety requirements, policies, and reports unsafe conditions to a leader; and takes immediate action to correct issue when possible.Controls downtime by informing production workers of routine electrical preventive maintenance techniques and monitoring compliance.Follows all company policies and work rules including but not limited to 6S, GMP, and BOS quality system.Responsible for maintaining ISO standards.Use the preventative maintenance program.Contributes to team effort by accomplishing related results as needed.Troubleshoot electric, pneumatics, mechanical and hydraulics.Perform light fabrication.You Have2-year degree or prior work experience.Must be team oriented.Self-Motivation and flexibility of job assignments.Blend of technical, interpersonal skills, and continuous learning through training.Strong mechanical/electrical aptitude and experience.Basic computer skills.Plastipak is an Equal Opportunity EmployerIn order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak’s Privacy Policy to understand how Plastipak uses and protects the information that you provide.
Full Time
11/6/2024
Hiram, GA 30141
(38.6 miles)
Overview: ConGlobal is the industry-leading provider of intermodal rail terminal services, auto loading and unloading and container depot services. We take pride in consistently delivering superior and reliable service, a broad scope of services and an exemplary safety record. We’re currently seeking a Chassis Repair – Maintenance TechnicianChassis Repair – Maintenance Technicians are charged with repairing containers, trailers and chassis. Repair & Replacement work includes but is not limited to; containers, lights, tires, landing legs, brakes and framework. Responsibilities: Chassis Repair – Maintenance TechnicianConducts routine/scheduled maintenance on railroad leased/owned containers and chassisRepairs equipment in accordance with railroad, IEP, manufacturer & FMCSA guidelinesDocuments repairs according to an established reporting system; verbally and in writingRepairs tires, brakes, lights, landing leg and frameworkPerforms light welding when requiredOther duties as assignThis is an exciting time at Conglobal and we’re seeking individuals to join our growing team! We offer full time employees the following; competitive compensation, benefits, 401K & vacation. Qualifications: Minimum of 3-years verifiable mechanic experience in ANYindustryAbility to lift in excess of 50lbsOpen availability (24/7/365)Willingness to work in varying weather conditionsMust have own hand toolsValid Driver’s LicenseMust be willing to complete a drug screen, physical and background check
Full Time
11/10/2024
Atlanta, GA 30383
(15.1 miles)
The Facilities Maintenance Technician will report into the Regional Manager Facilities while maintaining all equipment and systems at the Hertz Airport car rental location. Wage: $28.00/hr Job purpose Efficiently operate and maintain buildings, systems and equipment for various car rental locations. Interpret technical issues to prevent equipment and facilities downtime and proactively pursue building, equipment and maintenance related issue. Develop and maintain strong relationships with business unit customers and stakeholders. Facilities Maintenance Technician position requires administrative duties, working with tools to complete work orders as necessary, and maintaining maintenance metrics. Key responsibilities: Respond quickly to emergency situations, summoning additional assistance as needed including nights weekends and holidays.Coordinate and Perform preventive maintenance tasks to minimize business interruption and ensure that buildings, systems and equipment meet or exceed their rated lifePerform minor construction as directed by Lead Facilities Maintenance Technician and Facilities ManagementRecord and maintain Computerized Maintenance Management Systems (CMMS) data to develop maintenance history, plans, and account for labor hoursMonitor service providers as directed by Lead Facilities Maintenance Technician and Facilities Management Key-result areas Ensure that buildings, systems and equipment are maintained to standards for the business unitsAdhere to facilities standards to ensure consistent delivery maintenance servicesManage Service Providers ongoing maintenance standards, quality and costs to ensure delivery is as contracted and is appropriate.Support asset assessment programs to provide condition codes for capital planning and risk mitigation.Ensure appropriate and consistent reporting of the facilities programs and issues to Facilities Management Educational Background: High school diploma or equivalent preferred Professional Experience: Minimum of four years in a similar or related role and working with service providersBuilding and grounds general maintenanceUnderstanding of systems such as electrical, plumbing, HVAC, car washes, vacuum systems and fuel stationsConstruction, repair and maintenanceComputerized Maintenance Management Systems and PC skills such as email, Word and Excel,Environmental considerations Skills: Effectively communicate with all stakeholdersSelf-motivatedWork in and with teams to provide necessary services Physical Demands: Candidates must be able to work in hazardous surroundings and at heights up to 60’. The employee will be required to safely walk, stand, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, see and hear. Work Environment: While performing the duties of this job, the employee may be exposed to outside weather conditions including wet, humid, cold, and heat. Work environment may include hazardous materials and conditions, high noise level and dust.The Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran
Full Time
10/30/2024
Braselton, GA 30517
(37.3 miles)
Serving the needs of all families with young children,Carter’s Inc. is the largest North American apparel retailer exclusively for babies and young children, encompassing Carter’s, OshKosh B’gosh, Skip*Hop and Little Planet brands. Meaningful work, constant learning, genuine people, and a community guided by core values that promote inclusion and innovation is in everything we do. There are many reasons to build your career at Carter's.Essential Job functions (Tasks, duties and responsibilities most important for the job)Uses correct procedures to order, receive, and track parts and supplies. Consistently processes and submits reports or paperwork. Creates and maintains organized files and databases and identifies and resolves discrepancies in records or files. Tells management about incorrect or inefficient processes, inventory variances, and Computerized Maintenance Management System (CMMS) deficiencies. Records and reconciles financial transactions in a timely manner, and maintains the security of financial filesProvides support to maintenance operations by generating and maintaining forms, reports, and logs via computerized maintenance management software (CMMS); performing weekly inventory checks; tracking financial transactions; and overseeing and communicating equipment warranties to suppliersMust control and issue tools and parts to maintenance as required.Generate reports and assist in purchasing of parts and equipment as required.Track and maintain trend performance reporting tools.Uses policies, procedures, and/or guides to make good choices. Uses data and facts in order to make day-to-day decisions and involves others as needed. Recognizes what might be a problem and informs those who can correct it.Plan for and Improve Work - Accepts responsibility and meets expectations for own work. Identifies steps needed in order to carry out work as requiredUses policies and information in order to exceed company expectations. Finds and uses the right resources (products and tools) at the right time in order to resolve work requests.Must have the ability to perform the job with the highest standards of quality and accuracy.SECONDARY FUNCTIONS (IF APPLICABLE - ANY DUTIES NOT CONSIDERED ESSENTIAL)Occasional assistance to industrial engineering and maintenance technicians as required.Other tasks as assigned.Required Experience:knowledge, skill and ability requirements-minimum compentencies required for jobBasic working knowledge of computers, RF Scanners and Warehouse Management systems.Basic working knowledge of conveyor, equipment and electrical parts.Proven team member with skills to multi-task.Proficient reading skills.Experience with Microsoft Suite, specifically proficient with Excel and Word.The ability to use basic computer functions as needed.Must have the ability to abide by all of Carter’s policies and procedures; specifically, the attendance policy.Must have the ability to work safely and abide by all of Carter’s Safety rules and procedures.Must know, understand and follow all Standard Operating Procedures.The ability to be certified on lift equipment should this be required.Wear personal protective equipment (PPE) as required, to include, but not be limited to fall protection, eye protection, hearing protection, respiratory protection, chemical protection, and electrical protection.Prior work experience and educational requirementsHigh school diploma or a GED preferred, not required.Six months automated distribution center experience preferred.PHYSICAL and Work DEMANDSMust be available to work in a multi-channel, multi-shift distribution environment, flexible to work different shifts and extended hours based upon business needs.Must be able to stand and work for long periods including daily overtime, holidays and overtime as required.Requires intermittent periods during which continuous physical exertion is required, such as walking, standing, stooping, climbing, lifting material or equipment, some of which may be heavy or awkward.Use approved equipment to access freight and equipment in elevated areas.May work with substances that require special handling.Must be able to repetitively lift cases weighing up to forty pounds.Must be able to work in varying to extreme temperatures.Holiday schedule to be decided by Management.Must be available to work consecutive days in a row (for example 14+ days).Comply with Blackout Periods (no vacation or personal time allowed) as determined by Management.Carters is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, veteran status, or any other status protected by federal, state, or local law.
Full Time
11/6/2024
Atlanta, GA 30076
(27.0 miles)
10900 Alpharetta Hwy., Atlanta, GA 30076AUTOMOTIVE SERVICE TECHNICIANS / MECHANICS At least 2 Years of Experience Required$24 - $34 Per Hour + Great Benefits!Sign-on Bonus for the Right Candidate!We are Looking for Local Applicants in the Atlanta Area!Kennesaw, Marietta, Woodstock, Roswell are some of the places where we have found great Technicians!Walk-in Applicants are Welcome!Jackson Acura is seeking experienced Service Technicians / Mechanics to add to our team. If you have experience in automotive service and maintenance, we'd like to hear from you. We believe in rewarding our service technicians for their skills and certifications. You won’t find a better place to call home! We believe culture makes a difference and we strive to build lasting relationships with our employees, customers, and the community. We value our employees and invest in their success.We offer:$24 - $34 Per HourSign-on Bonus for the right candidateHealthcare BenefitsClimate-controlled Facility401(k) Retirement PlanPaid VacationFlexible schedule! Half Saturdays off!Career Advancement OpportunitiesResponsibilities - Service Technician:Examine vehicles to determine the nature and cause of services and repairs needed,Perform those repairs and maintenance services, as well as preventative and routine maintenance tasks including systems such as brakes, A/C, tires, transmission, engine, oil changes, fluid flushes, warranty work, and recalls.Communicate with parts department to obtain needed partsExamine the vehicle to determine if additional safety or service work is required.Notify service advisor immediately if additional work outlined is not needed or required or if repairs cannot be completed within the time promisedDocument work performedRoad-test vehicles when required or refer to the test technicianQualifications/Requirements - Service Technician:ASE certified, Honda Certified or Acura certified a big plus but not requiredAt least 2 years of experience is requiredExcellent customer service skills are a mustProduct knowledge and tire quick service experience is a plusThe successful applicant must be able to work efficiently in a fast-paced environmentExcellent written and oral communication skills requiredKnowledge of shop equipment such as wheel and tire equipment, alignment system; diagnostic equipment, and A/C equipment is a mustMust have a valid Driver's license and clean driving recordPlease upload your resume. Completing the online assessment will grant you priority approval!Must be authorized to work in the U.S. without sponsorship and be a current resident.Must pass pre-employment testing to include background checks, MVR, and drug screen.About Us:Jackson Acura is the premier retailer of new and pre-owned Acura vehicles in the Roswell North Atlanta area. “Everything we do, we do with excellence”. We believe that culture makes a difference. Our company’s core focus is building relationships that last, with our employees, customers, and community.We are an Equal Opportunity Employer. All qualified applicants are considered regardless of ethnicity, nationality, gender, veteran or disability status, religion, age, gender orientation, or other protected status.
Full Time
11/2/2024
ATLANTA, GA 30331
(23.3 miles)
Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Job DescriptionTrailer Mechanic will perform preventative maintenance on UPS Transportation Trailers and Converter Dollies. Will properly diagnose and perform necessary repairs to non-power equipment, including air brake systems and electrical systems. Ideal candidate will possess the following:Current documented trailer mechanic experienceExperience using diagnostic equipment, scan tools and personal computerPossess a full complement of personal hand toolsResponsibilities & Duties:Meet D.O.T requirementsBend, stoop, squat, kneel, crouch, crawl, climb ladders and stairs, stand, walk, and turn/pivot frequently throughout the duration of the workdayReport to work on a regular and timely basis and complete the scheduled workday on a consistent basisAbility to work varying shifts, additional hours and/or overtime depending on service needsSitting required infrequently throughout the duration of the workdayLift, lower, push, pull, leverage and manipulate equipment and/or packages weighing up to 70 poundsAssist in moving packages or equipment up to 150 poundsSimple hand grasping, power hand grasping, fine hand manipulation, reaching from foot level to above shoulder level as necessary to complete assigned tasksOperate standard/manual transmissionOperate power, pneumatic toolsRequired to wear personal protective equipmentWork in an environment with: variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weatherHave a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $32.13 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.
Full Time
10/14/2024
Hampton, GA 30228
(20.7 miles)
The pay range per hour is $38.00 - $45.37Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About the Job:Tuition ReimbursementHealth Benefits After 14 Days!Currently Hiring for Below Shift:E1: Sunday - Wednesday from 3:30am - 1:30pmAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 3 (MT3), you will be a key technical subject matter expert that ensures high equipment availability rates. You will use preventive and predictive maintenance processes, rapidly troubleshoot equipment breakdowns, and quickly restore equipment to service. You will work with other Target maintenance technicians to solve difficult problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, handle multiple projects, and work with a sense of urgency. You will collaborate with others to perform Root Cause Analysis for equipment failures, and fix systemic issues using careful observation and diagnostic tools. You will have an expert understanding of system controls logic and troubleshooting techniques. As the technical subject matter expert on a shift, you will also act as a technical trainer, sharing your knowledge with maintenance technicians and technician trainees to enhance their technical skills and job knowledge.An individual in this role will:Maintain and troubleshoot electrical/mechanical aspects of Material Handling Equipment (MHE), including conveyors, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Control and adjust positioning accuracy and timingControl and adjust scanners, cameras, scales and printer applicatorsControl, reset, repair or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentInstall, maintain, and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tachometers and encodersTroubleshoot PLC programs, components (CPU back plains, I/O boards, counters, modules, and devices), field buses (ASI, Profibus, DeviceNet, etc.), and communications modules (Ethernet). Configure and adjust PLC parameters and component setupConduct maintenance and higher level troubleshooting of any robot typeTroubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and materials, up to 480VDevelop work plans with peer technicians for emergency repair of critical assetsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies, as neededNavigate ladders and gangways safely and work off platforms and equipment at significant heightsWork effectively in varied conditions, temperatures, and environmentsFrequently monitor all aspects of the internal and external worksite, which may include standing/walking for up to 10-12 hoursLift and/or move product or items up to 49 poundsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Possess or ability to obtain a valid driver’s licenseExcellent PC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuringExperience with the following areas:Preventive/predictive maintenance proceduresBlueprint and schematic readingWork order managementIndustrial Electrical, Controls and ElectronicsProgrammable Logic Control (PLC) programsNational Electrical Code (NEC) and Material Handling Equipment (MHE) safety standardsAutomated material handling equipment or robotic maintenanceDesired:Degree from a technical or community college, or accredited industrial maintenance certifications (PLCs, Industrial Networks, Machine Logic, Robotics), with a focus in the Mechanical/Electrical fields4+ years of experience in the Mechanical or Electrical maintenance fieldAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.
Full Time
3/17/2024
Jefferson, GA
(44.7 miles)
JOB SUMMARYPerforms work in one or more of the maintenance trades requiring advanced specialized knowledge (e.g., electrical, HVAC, etc.) Tests, inspects troubleshoots and repairs machines, equipment and/or systems. Conducts a variety of complex installation and maintenance work to prevent breakdowns and ensure proper functioning of facility, machinery, equipment and applicable systems. REQUIREMENTSMaintains safe, efficient and proper operation of a variety of Distribution Center equipment and systems. Competes tests, inspections, troubleshooting and repairs. Interprets blueprints, sketches, layouts, wiring diagrams, drawings and specifications. Leads and guides other associates in safety procedures, installations and maintenance. Recommends and implements improvements to equipment, operations and procedures as appropriate. Oversees and maintains repair, inventory and maintenance logs. Estimates costs, prepares requisitions and contacts vendors for parts and service as necessary. Performs special projects or duties as assigned. Guidance and Contacts specify the number of associates receiving day-to-day guidance/direction. Qualifications:Trade school with completion of a formal apprenticeship program. Four years of experience in the installation, maintenance, and repair of a variety of equipment including mechanical electronic, pneumatic, and hydraulic control systems. Demonstrated leadership or supervisory experience. Willingness to work various shifts to meet business needs is required. Minimum job skills required to perform this job (for example: programming languages, strong interpersonal skills, computer software packages): Minimum experience required to perform this job: List specific jobs which could prepare an individual for this job: Maintenance Specialist Mechanic Organization Chart D/C Maintenance TechnicianAt HomeGoods, we embrace the unknown? - with new products, new challenges and new ways to make a house a home. Our products add little, special touches to customers' lives and our people do the same for each other. Everyone supports each other to Discover Different - here and throughout the entire TJX family, which includes TJ Maxx, Marshalls, Sierra, and Homesense.Discover Different means we embrace each other’s differences and unique perspectives. We consider all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status. We also provide reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.
Full Time
10/25/2024
Atlanta, GA 30336
(24.6 miles)
As a Plastipak Maintenance Technician, you perform, monitor & evaluate preventative maintenance plans, while continually work towards improving equipment & processes. At Plastipak, Associates take pride in maintaining our high standards of quality products and our positive team culture. We’re also proud to be recognized as an America’s Safest Companies by EHS Today.We Offer Set Schedules: We offer 8 & 12-hour shifts!Rewards: Be recognized for your expertise & rewarded for your contribution!Advancement: We prioritize promotion from within!State-of-the-Art Equipment: Work with our top-of the line equipment from industry leaders, as well as our own proprietary technologies!You WillPerform industrial maintenance for extrusion & injection molding manufacturing equipment to assure uninterrupted & optimal operationsExecute & continuously improve preventative maintenance proceduresParticipate in changeovers, ensuring efficient & correct executionRepair & rebuilds spare partsAssure compliance with all safety protocols, quality standards, operational practices & proceduresExpand your expertise through formal training & on-the-job experiences, including new equipment installation & equipment modification projectsYou HaveAbility to work either an 8 hour Monday-Friday shift or a 12-hour 3-2-2-3 night shift (6:45 pm - 7:15 am)High School Diploma, GED or equivalentA minimum of three (3) years of experience maintaining manufacturing equipment.Solid hydraulics, pneumatics and electrical knowledge, along with the ability to troubleshoot & problem solveAbility to interpret technical & operational documents, including manuals, blueprints, schematicsability to lift up to 75 pounds and work on aerial platforms up to 20 feet with or without reasonable accommodationPlastipak is an Equal Opportunity EmployerIn order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak’s Privacy Policy to understand how Plastipak uses and protects the information that you provide.
Full Time
11/10/2024
Roswell, GA 30076
(27.0 miles)
Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:·Competitive Starting Pay·Paid Training·Global Advancement Opportunities·Company Vehicle (as applicable)·Referral Bonuses·Comprehensive BenefitsoMedical/Dental/Vision insuranceoHealth Savings Account (HSA)oLife Insuranceo401(k) savings plan with company matchoShort-Term and Long-Term DisabilityoEmployee Assistance ProgramoWellness ProgramoAnd More!What you will doUnder direct supervision and using established standards, responsible for hardware designs and software programming for HVAC control systems to meet the intent of the project requirements. Provides detailed information and submittals to communicate design and operation to customers, consultants, Johnson Controls field installation team and subcontractors. Responds to basic warranty calls.How you will do it·Selects hardware designs from standard design library for flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.·Performs software programming using established standards as a basis of design.·Coordinates the creation of necessary drawings and equipment schedules for submittals and installation.·Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule.·Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.· Gathers field changes from the project team and creates as-built drawings and software. Prepares proper documentation and/or manuals for system operation.·Keeps management and JCI contractor or customer informed of job progress and issues.·Coordinates with project owners to determine engineering & field execution task responsibilities.·Assists in performing site-specific training for owner/operator on the total system.·Completes paperwork including but not limited to time sheets, expense reports, and on-site documentation.·Adheres to safety standards. High degree of regard to employee and subcontractor safety. What we look for Required·Demonstrated knowledge of mechanical, electrical, and control systems. ·Demonstrated technical aptitude. ·Demonstrated advanced computer skills required.Preferred·Associates or Bachelors Degree in Mechanical /Electrical Engineering or Computer Science or 5 + years in the HVAC field.·Experience with installing and/or commissioning controls systems including system-level controllers – or – experience designing or evaluating mechanical/electrical building systems or control systems.Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/careers.Terms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the Company.#TechHiring
Full Time
11/7/2024
Atlanta, GA 30383
(15.1 miles)
KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment
Full Time
11/7/2024
Hampton, GA 30228
(20.7 miles)
Starting Hourly Rate $20.50 USD per hourPay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting products to the guest as fast as possible, a critical differentiator, and one of the most essential Logistics functions. You will reach beyond the bounds of your team to collaborate across the enterprise and find solutions to support the business. Whether it is through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you will have a chance to positively affect thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As a Facility Attendant 1, you will perform a wide variety of minor maintenance tasks in addition to all other duties as assigned pertaining to the general upkeep and maintenance of the Distribution Center. This includes, for example:Support Maintenance Technicians in performing mechanical preventative and corrective maintenance throughout the facility, such as servicing and repair of hand tools and minor floor machines.Act as a Qualified Electrical Assistant for electrical safety processes.Support maintenance personnel in installation/removal of assorted items of equipment throughout the facility.Evaluate and inspect the interior/exterior of the facility to determine general upkeep or repair requirements.Change PIT (Powered Industrial Truck) batteries, perform preventative and corrective maintenance on batteries, keep battery equipment clean and painted, keep battery-changing records, and turn in records at shift end.Complete maintenance, cleaning, and troubleshooting of Label Tec PrintersOperate hand and power tools such as drills, saws, sanders, grinders, pneumatic tools, and welders.Construct or repair assets within the facility such as assembling furniture, building shelving or racks, and repairing workbenches utilizing skilled carpentry, welding, and fabrication as required.Complete plumbing tasks such as installation or repairing of faucets and landscape sprinklers, clean stopped drains and clean sumps and drains as required.Perform tasks such as painting and drywall repairs, concrete patching, or minor concrete replacement.Assist in all duties related to the preventive maintenance programs, such as pest control, HVAC, and update records associated with these programs.Remove cardboard bales from bailers, remove trash from buildings using large portable dumpsters, and keep building grounds in a neat and orderly manner.Operate snow removal equipment to clean all walks, roads, and parking lots as assigned.Drive Target owned vehicles to execute yard cleanup, respond to yard incidents, escort vendors, and pick up parts and materials as required.Operate all power equipment in a safe manner, always use safe lifting techniques, and promptly assist in spill cleanup to avoid risk of accidents to team members throughout the facility.Complete necessary paperwork or requisitions for materials as requested, keep daily work order logs for all workUtilize handheld devices and mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Follow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating safety hazards Core responsibilities of this job are described within this job description. However, job duties may change at any time due to business needs.Physical Demands (must be able to perform with or without reasonable accommodation):Lift and carry merchandise weighing up to 47 lbs. regularly, and up to 60 lbs. on an infrequent basis Move about within and around the site with great frequency (up to 10-12 hours per shift)Work in various temperature-controlled environments including temperatures below freezing (Food Distribution Center only)Work in conditions that may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAccess all areas of the Distribution Center, including the ability to travel on conveyor crossovers and reach mezzanine platforms Have full manual dexterity in both hands and wrists, eye/hand coordination, feet (e.g., operating foot pedals), manual (e.g., picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)About you: Possess or ability to obtain a valid driver’s licenseWork both independently and in a team environmentEffective communication skillsAccurately uses basic math skillsAble to be certified to operate all power equipmentAble to use maintenance tools; saws, drills, etc.Able to read and comprehend labels, tickets, instructions, etc.Able to work with minimal supervision and self-motivateAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.
Full Time
11/2/2024
ATLANTA, GA 30331
(23.3 miles)
Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need. Shift for this position is 3RD from Monday – Friday 6pm – 3am. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required, throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need. Must possess the required hand tools required to perform the applicable job assignment. Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/B or A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $37.80per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
What we offer:· Competitive Starting Pay· Paid Training· Global Advancement Opportunities· Company Vehicle (as applicable)· Referral Bonuses· Comprehensive Benefits· Medical/Dental/Vision insurance· Health Savings Account (HSA)· Life Insurance· 401(k) savings plan with company match· Short-Term and Long-Term Disability· Employee Assistance Program· Wellness Program· And More!What you will doThis skilled position involves installing, programming, troubleshooting, configuring, commissioning, and servicing Fire Alarm Systems Systems as well as other related building system products at customer sitesIncluding panel repair/reprogram, device replacement/repair, resolving low voltage circuit troubles and system testingOrganize and effectively utilize technical resources, information, material, and support to assure efficient execution of all assigned tasksPosition involves the programming of fire alarm, security, and access control system panels, but will primarily focus on networked fire alarm systems How you will do itPerform installation/programming on integrated fire alarm systemsRespond to customer service calls in a timely and efficient manner, troubleshoot and repair as neededWill be required to participate in after-hours service programCommunicate with central dispatch on current work order status and receive updates on outstanding customer issuesRead and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational/product manualsSupervise and inspect the installation of equipment to meet customer and contract specificationComplete necessary certification courses on internal and external products usedComplete and submit all required task-related, activity, productivity, and other documentation in a timely mannerWhat we look forRequiredAt least 5 years of documented experience in low voltage electrical systems, including Fire/Life Safety Systems,NICET Level II or hire in fire alarm systemsHigh School Diploma or equivalent requiredExperience in reading and interpreting blueprints, submittals, and operational/product manualsExperience with hand tools test equipment, multi-meter usage, digital analyzer and commissioning devicesCapable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc.Able to work flexible hours including weekends to meet customer requirementsOvernight travel may be requiredDemonstrate a high level of customer serviceAbility to lead & work well with team membersAbility to adhere to, implement, and always follow safety guidelines and proceduresStrong organizational skills, positive attitude, and an ability to learn quicklyPossess a valid driver’s license and driving record that meets company requirementsAble to pass a pre-employment background and drug testAble to obtain and retain any licenses that are required by National, State and Local codesBasic understanding of Network concepts and architectures.PreferredTwo-year Associates Degree in Electronics; Network; Computer Science or related field#Techhiring
Full Time
11/2/2024
Hampton, GA 30228
(20.7 miles)
The pay range per hour is $33.40 - $39.76Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About the Job:Tuition ReimbursementHealth Benefits After 14 Days!Currently Hiring for Below Shifts:E1: Sunday - Wednesday from 3:30am - 1:30pmE3: Sunday - Wednesday from 10:30pm - 8:30am w/ $2.50 shift differentialL2: Wednesday - Saturday from 1:00pm - 11:00pm w/$1.50shift differentialAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and suppliesCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuringExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insuranc401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technician and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all controls technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains mechanical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in the development and testing of software programs necessary to operate the system per the intent of the project requirements. Compiles and/or completes project as-built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredVocational School four year program graduate, an Associate’s degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems.Demonstrated ability to install and/or service electronic control systems and HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Possesses the ability to explain technical information to technical and non-technical people.Demonstrate effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.#TechHiring
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
Be part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doReceive service calls from Service Resource Center, including a brief description of equipment/system malfunctions.Responsible for contacting customer representative and ascertain equipment/systems problems.Diagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sites.Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment.Service, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnell.Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals.Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction.Complete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computers.Obtain customer signature upon completed service call assignment.Participate in a scheduled On-call rotation. Help to train or mentor others on the service team.Perform other duties as assigned.What we look forRequired5+ years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems.NICET Level II certificationValid Fire Alarm LicenseExperience in reading and interpreting blueprints, submittals, and operational/product manuals. Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.High School Diploma or equivalentAbility to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etcAbility to work flexible hours including weekends to meet customer requirements.Overnight travel may be required.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and always follow safety guidelines and proceduresStrong organizational skills, positive attitude, and ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Retain any licenses that are required by National, State and Local codes.Completion of SimplexGrinnell 4120 Network training within 12 months Johnson Controls International plc. is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require accommodation during the application process, please visit www.johnsoncontrols.com/careers.Terms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the Company.#TechHiring
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
**SIGN ON BONUS ELIGIBLE****RELOCATION ELIGIBLE** What you will do Employees are responsible for the execution of the installation project plan including equipment delivery and interface with other trades to successfully complete projects while exceeding customer's expectations. How you will do itApplies specialized functional area skills and basic knowledge including underlying professional/technical principles or standards. Applies judgment based on practice and precedence. Frequently resolves problems through research of multiple alternatives. May allocate work as a team leader or check on completion or quality. Demonstrate supervisory/leadership abilities to include training, team building, and negotiation skills, district administration and effective interaction with customers. Perform and/or support the installation of fire related and/or other building systems products. Read and interpret blueprints, diagrams, submittals, specifications, software/systems programs, schematics, and operational product manuals.Ability to program or experience with programing low voltage systems including fire alarm, nurse call, access control, security, CCTV, and clocks.Identify out of scope requests by the contractor or customer and be able to follow it up with RFIs with suggested solutions. Assist customers with all questions and concerns in a timely and professional manner. Ability to effectively communicate project status to management. Complete all appropriate Company paperwork as required.What we look forRequiredHigh School Diploma, GED, or equivalentActively start testing for NICET II in the first year upon hire.Knowledge to meet with code officials to arrange for personnel licensing, building permits and to discuss the intended wiring methods.Experience in meetings with contractors and owners.Knowledge of coordinating the project activities with other trades at the work locations to optimize installation time.Must be proficient in the use and application of industry related equipment including MS Office.Obtain any necessary Certifications or Licenses as required.Must have excellent communications skills, using tact and diplomacy when dealing with customers.Able to work in unusual and sometimes difficult positions such as climbing a ladder, scaffolding and high lift equipment up to 60 feet, working within ducts, crawl spaces, above ceilings, etc.Capable of performing physical labor to include carrying and moving equipment and tools as required. Valid driver's license with a good driving record. Johnson Controls International plc. is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require accommodation during the application process, please visit www.johnsoncontrols.com/careers.#TechHiring
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insuranc401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technician and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of serviceHow you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all controls technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains mechanical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in the development and testing of software programs necessary to operate the system per the intent of the project requirements. Compiles and/or completes project as-built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredVocational School four year program graduate, an Associate’s degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems.Demonstrated ability to install and/or service electronic control systems and HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Possesses the ability to explain technical information to technical and non-technical people.Demonstrate effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.#TechHiring
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
What we offer:Competitive Starting PayHealth Savings Account (HSA)Tuition ReimbursementPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceLife Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramWhat you will do ·Install, program, configure, commission and service Fire Alarm and Fire Suppression Systems including but not limited to; Simplex, Fike, Kidde, Inergen, Sapphire, FM-200, and CO2 as well as other related building system products at customer sites. How you will do it ·Execute projects on time and within allocated installation hours. ·Work with the project manager to resolve all discrepancies, and coordination problems that impair installation activities. ·Must be able to work on multiple projects simultaneously. ·Read and interpret complicated blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals. Coordinate the installation activities with all trades to optimize installation time. Attend all required site meetings. ·Instruct and train customers on functional operation of the equipment/system. Conduct simulations and answer questions. ·Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction. ·Complete project documentation in a timely manner. ·Adhere to all OSHA and SimplexGrinnell safety policies and procedures. Participate in a scheduled On-call rotation. ·Perform other duties as assigned. What we look for Required ·High School Diploma or Equivalent ·Three (3) years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems. ·Experience in reading and interpreting blueprints, submittals, and operational/product manuals. ·Experience with hand tools test equipment, multi-meter usage, digital analyzer and commissioning devices. ·Able to obtain and retain any licenses that are required by National, State and local codes ·Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. ·Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc. ·Ability to work flexible hours including weekends to meet customer requirements. ·Demonstrate a high level of customer service. ·Ability to lead & work well with team members. ·Ability to adhere to, implement, and follow safety guidelines and procedures at all times. · Strong organizational skills, positive attitude, and an ability to learn quickly. ·Possess a valid driver’s license and driving record that meets company requirements. ·Able to pass a pre-employment background and drug test. ·Ability to Overnight travel may be required. Preferred ·NICET Level II certification. ·Local State licenses. ·Knowledge of local Fire Codes#TechHiring
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
Be part of the future!We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:Competitive Starting PayPaid TrainingGlobal Advancement OpportunitiesCompany Vehicle (as applicable)Referral BonusesComprehensive BenefitsMedical/Dental/Vision insuranceHealth Savings Account (HSA)Life Insurance401(k) savings plan with company matchShort-Term and Long-Term DisabilityEmployee Assistance ProgramWellness ProgramAnd More!What you will doReceive service calls from Service Resource Center, including a brief description of equipment/system malfunctions.Responsible for contacting customer representative and ascertain equipment/systems problems.Diagnose problems and perform service and repairs on electronic fire alarm systems and other related building system products at customer sites.Follow prescribed troubleshooting procedures and refer to technical manuals, part manuals, change notices and bulletins, modification notices, etc. to repair equipment.Service, troubleshoot and install many different manufacturers’ Fire & Life Safety systems including SimplexGrinnell.Read and interpret blueprints, diagrams, submittals, specifications software/systems, programs, schematics and operational product manuals.Exhibit excellent customer service skills by consistently communicating with the district staff and customers to ensure customer satisfaction.Complete Service Acknowledgements with proper coding through communication devices, such as smart phones and laptop computers.Obtain customer signature upon completed service call assignment.Participate in a scheduled On-call rotation. Help to train or mentor others on the service team.Perform other duties as assigned.What we look forRequired5+ years documented experience in low voltage electrical systems, including Fire/Life Safety systems, Access Control, Nurse Call, and Paging systems.Valid Fire Alarm LicenseExperience in reading and interpreting blueprints, submittals, and operational/product manuals. Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices.High School Diploma or equivalentAbility to follow verbal and written instructions.Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs.Able to work in unusual and sometimes difficult positions such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etcAbility to work flexible hours including weekends to meet customer requirements.Overnight travel may be required.Demonstrate a high level of customer service.Maintain truck inventory to ensure timely response to customer needs.Ability to adhere to, implement, and always follow safety guidelines and proceduresStrong organizational skills, positive attitude, and ability to learn quickly.Possess a valid driver’s license and driving record that meets company requirements.Able to pass a pre-employment background and drug test.Retain any licenses that are required by National, State and Local codes.Completion of SimplexGrinnell 4120 Network training within 12 months PreferredNICET Level II certification strongly preferredJohnson Controls International plc. is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require accommodation during the application process, please visit www.johnsoncontrols.com/careers.Terms and Conditions of such benefits programs are subject to change at any time at the sole discretion of the Company.#TechHiring
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
Be part of the future! We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference. What we offer: Competitive Starting Pay Paid Training Global Advancement Opportunities Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits Medical/Dental/Vision insurance Health Savings Account (HSA) Life Insurance 401(k) savings plan with company match Short-Term and Long-Term Disability Employee Assistance Program Wellness Program And More! What you will doWe are looking for a skilled Journeymen Chiller Mechanic who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of 5 years’ chiller experience, with knowledge of maintenance procedures, trouble shooting, and rebuilds of medium-large tonnage chillers of all brands.How you will do itYou will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs in order to prolong the equipment life cycle of our customers equipment. You will establish & maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face. You will be expected to provide quote estimates for labor & material repairs and upgrades as needed. You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location. You will be required to use cutting-edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment. You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear and conditions. You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires, including occasional overnight stays.You will be added to our on-call rotation, since we are a 24/7 service company.What we look for Required:Requires Mechanical Refrigeration Journeyman statusKnowledge of ammonia refrigeration systems is required.The Individual will be responsible for: the operation, maintenance and repair of ammonia refrigeration chiller systemsTraining on going certification on ammonia will be providedMore than 5 years of industrial experience with all types of chillers, various compressor technologies, chiller control systems, and speed drives.Operating knowledge of Microsoft office software and working proficiency with handheld computer (i.e. Smartphone, iPad)Adherence to company safety program.
Full Time
11/6/2024
Roswell, GA 30076
(27.0 miles)
Here's what we have to offerCompetitive pay.Paid vacation, holidays, and sick time.Comprehensive benefits package, including retirement savings plan, medical, dental, and vision care – available from day one.Extensive product andon-the-job/cross-trainingopportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Company vehicle, tools, and equipment provided to complete all jobs.Scheduling and management support.What you will do:Under general direction, responsible for the service & repair, design, configuration, and operation of complete HVAC building control systems and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the customers and JCI goals. Accountable for quality, timeliness and efficiency of Service & repair and designs. Develops complex software programs, commissioning and solving to ensure proper operations of the building control system. Provides detailed information and submittals to communicate design and operation to customers, consultants,Sales and Service team and subcontractors.How you will do it:Designs, configures and services technically complex building control systems for the customers facility. Creates flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.Develops and tests software programs necessary to operate the system per the customer's facility requirements.Coordinates and creates necessary drawings and equipment schedules for submittals, service and/or installation.Selects, orders, and tracks the delivery of materials for assigned jobs.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.Provides field change information to the team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with sales and service operations. Performs value engineering to provide cost effective results while maintaining customer satisfaction.May provide work direction to Service Controls Technician I and Senior I and Senior II Controls Technicians.Adheres to safety standards.A high degree of regard to employee and subcontractor safety.What we look for:RequiredMinimum of Ten (10) years of experience with programming, installing and/or commissioning controls systems including system-level controllers.Demonstrated knowledge of the construction, service mechanical, electrical, or HVAC service industry.Demonstrated knowledge and understanding of mechanical drawings, electrical wiring diagrams, control theory, automatic temperature controls, building automation systems and other building subsystems.Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., Modbus, LON, BACnet, etc.).Ability to relate technical knowledge to a non-technical audience.Demonstrated advanced computer skills required, particularly computer-related drafting tools, such as Visio.PreferredBachelor's degree in engineering, or an associate degree in a related technical field with seven years of relevant work experience required.Understanding of IP networking for building automation system
Full Time
11/10/2024
Roswell, GA 30076
(27.0 miles)
What you will doPerform HVAC Control systems programming, troubleshooting, installation, commissioning, and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components.Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment.Provide front line technical and repair support through effective communications with Johnson Controls customers.Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers.Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization.How you will do itLoading Johnson Controls field and network level controller software.Performing commissioning and system diagnostics for all levels of system controllers as well as enddevices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation.Keeps management and JCI contractor or customer informed of job progress and issues.Calibrates systems requiring basic electronic test equipment.Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation.Documents changes and provides information for as-built documentation.Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintainedEngage with customers to fully understand their systems and needs.Communicates with the JCI contractor or customer upon arrival and before leaving the work site.Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety.What we look forRequired:2-4 years experience with BAS, Honeywell, Siemens , Tridium , Trane, Automated etc...Strong understanding of HVAC systems, sequence and applicationsDemonstrated technical aptitude in mechanical and electro-mechanical fieldsAble to use hand, power tools and electrical testing equipment such as a multi meter.Solid knowledge base in use of personal computers.Attention to detail.Good communication and listening skills.#TechHiring
This website uses cookies for analytics and to function properly. By using our site, you agree to these terms.