Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:Previous G700 mechanical systems experience preferred . This is a weekend shift position.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 223406Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 11/11/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Our employees are the most important part of our business. Thank you for your interest in applying to new opportunities with us.What you will doWe are looking for a skilled Journeyman Chiller Mechanic TTL (Technical Team Leader) who has worked in commercial, industrial, and/or institutional markets to join our team. Candidates should have a minimum of 5 years’ Chiller experience, with knowledge of maintenance procedures, trouble shooting and installation of equipment of all brands. Assists branch leadership with coaching and mentoring of branch technicians with the delivery of customer satisfaction and following operational processes. Providing Level 1 technical support and assist with technical development for others. Ensures work is being performed in compliance with state, local and Federal legal requirements and operates on the job with the highest of ethics. How you will do it You will be assigned primary service accounts and responsibility for executing contract maintenance visits, inspections, site assessments, service requests and recommending necessary upgrades or repairs to prolong the equipment life cycle of our customers’ equipment. You will establish and maintain a positive relationship with customers, vendors, and co-workers through effective oral and written communication skills via phone, computer, and face to face.You will be expected to provide quote estimates for labor & material repairs and upgrades as needed as well as coaching and mentoring other HVAC Mechanics in quoting.You will represent the company by serving as the direct customer contact and be responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing, and repairing equipment and systems at customer’s location. You will be required to use cutting edge software and technology, along with a variety of hand-tools, rigging equipment, following blueprints or engineering specifications, to diagnose and repair equipment. You will be expected to continually enforce safety to the highest standards and maintain security and accountability of company issued and procured assets by recording use, wear, and conditions. You will be expected to work as part of a team who is dedicated to delivering the highest standard of service to all its customers which may require the flexibility to work overtime and weekends as the business requires.Four-to-six-week cycle for all on-call rotation since we are a 24/7 service company. What we look for Required: Universal Refrigeration and Air Conditioning Systems CFC. Certification is required.Experience/factory training on various Water and Air cooled Chillers with emphasis on York, Carrier, Trane and Daikin.Operating knowledge of Microsoft office software and working proficiency with hand-held computer (i.e., Smartphone, iPad)Adherence to company safety programValid driver's license,Good verbal and written communication skills and ability to lead a team of 6-12 Mechanics.Must be able to be on call nights and weekends on a Four-to-six-week cycle rotating basis.At least 5 years of commercial, industrial, and/or institutional experience with all types of HVAC systems, various compressor technologies, HVAC control systems, and speed drives as well as leadership experience in managing small technical teams.#TechHiring

Req ID:449032Address: 8436 Ford Ave. Richmond Hill, GA, 31324Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Overview: MB AUTOMOTIVE MECHANICS CONSIDER A CAREER HERE!INDUSTRY LEADING PAY, PLUS BONUSES!WORK AND LIVE IN A GREAT PLACE!We are MERCEDES-BENZ OF HILTON HEADis part of the fast-growing Group 1 Automotive, a leader in automotive retail and service. We are growing and need to add Sprinter Technician/Mechanic,to our team! Are you an experienced Sprinter Technician ready to advance your career Are you ready to work in a Technician focused environment with all the tools and support to maximize your earnings potential If you answered yes than we want to meet you! You have several ways to apply so apply now!Our Sprinter Technician/Mechanic should be passionate about customer service, take pride in their work, an enjoy being part of a winning team that cares about their employees.In addition to competitive pay, we offer our associates the following benefits:Relocation Package Contingent on ExperiencePaid TrainingA Great Working Environment with the Latest EquipmentContinuous Job Training and Career Advancement OpportunityStructured, Self-paced and Paid Training OpportunitiesManufacturer and Group 1 RecognitionHealth, Dental, Vision Insurance,Life and Disability Insurance401(k) with company match,Paid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanWhat we Look for:Previous Sprinter Van Technician experienceNational Institute of Automotive Service Excellence (ASE) certification(s) or certification(s) in: brakes, electrical/electronic systems or engine performance preferred.Strong focus on achieving a great customer service experienceHigh attention to detailWhat you will do:Efficient and accurate work in accordance with dealership’s and factory standardsComplete system diagnostics and full automotive troubleshooting and testingRoad-test vehicles to ensure quality workMaintain an organized shop areaCommunicate directly with service advisors regarding the status of the service workContinuously learn new technical information and techniquesYou needA Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s License and Driving RecordGroup 1 is a Fortune 300 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of Integrity, Transparency, Professionalism, Teamwork and Respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* We are an Equal Employment Opportunity EmployerIND1#JP1#LI-JP1

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:JOB DESCRIPTION- Automotive Technician NON CDL Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team in Seattle, WA. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need. The current available shift is?6:00pm- 2:30am. ?Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/B Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The hourly pay for this position is $38.43 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Structural Mechanic IIIin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 4 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Q-stamp preferred. Position Purpose:In a team oriented work environment, under little to no supervision, Structural Mech III perform a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. May assist and instruct other team members.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . Possess the proven ability to move to new tasks with only a moderate, short-term impact to established goal hours and schedule . Rivet structural members, assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Ability to remove fasteners without damaging structures . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . Check all work and ensure a defective free assembly prior to final inspection . Instruct and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Maintain a neat and orderly work area, supports the company 5S & Lean Initiative Program and complies with all safety regulations. Use of personal protective equipment as required.Additional Functions: Participate in continuous improvement activities . Properly use and maintain company-provided tools and equipment and returns items to tool room after use . Ensure standard operating procedures are followed when operating ground support equipment . Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . Ensure accurate daily job charging to the aircraft . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership .Perform other duties as assigned.Other Requirements: Basic computer and basic shop math skills. Read and comprehend basic documents and instructions and read a scale. Must have essential personal skills and possess aptitude for hands-on craftswork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Ability to work with composite resins and materials. Must be able to work any shift. Must be able to climb ladders, stands, stairs, and work in small spaces or restricted areas & lift 50 lbs. Additional InformationRequisition Number: 223324Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-JP1

What you will do Johnson Controls Inc. is looking for forward-thinking talent to join our growing organization. During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners and the communities we serve. At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant building automation technologies in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun. We are looking for skilled mechanic who has experience with air cooled or water-cooled machines to work with top of the line commercial and industrial equipment. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard. Provide our customers with the highest level of service to solve building inefficiencies and resolve service related items. As a trusted advisor to our customers you will provide solutions and outcomes at the time of service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look for Required Must be a member or willing to join the local Union. Minimum of 3 years of practical working experience on air cooled or water-cooled machines with strong HVAC/ mechanical troubleshooting experience. You may be required to pass a knowledge examination to assess proficiencies. Attention to detail through interpersonal, digital, and written skills. Self-starter with a passion/ desire to learn and apply on the job. Prioritize safety in all forms Universal EPA refrigerants license, applicable state or local licensing, and valid driver's license

Avionics Technician Srin GAC SavannahUnique Skills:Multiple shifts available. Must be willing to support flight operations on multiple models of AC. Strong live AC avionics experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: 1. Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . 2. Self inspection capability for all avionics testing functions in applicable areas. . 3. In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Additional InformationRequisition Number: 222290Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician A&Pin GAC SavannahUnique Skills:Must be able to work 3rd shift.G-550 experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 220663Category: Service CenterPercentage of Travel: Up to 25%Shift: ThirdEmployment Type: Full-timePosting End Date: 11/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician Seniorin GAC SavannahUnique Skills:Must be able to work any shift as assigned by Service Team Manager.Let your career take flightGulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. 6 years Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose:Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects.Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221090Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Mechanic Team Lead-A&P (4th Shift-Weekend Days)in GAC SavannahUnique Skills:Availabilty to work 4th Shift (Weekend Days)Education and Experience RequirementsHigh School Diploma or GED required. Airframe and Powerplant (A&P) certificate required.. Valid Drivers License required. for the operation of towing and other Gulfstream transportation equipment. 5 years aviation maintenance experience with advanced knowledge of inspection and heavy maintenance of mid/large-size aircraft. Position Purpose:Plan and coordinate all mechanical system activities and provide daily information on aircraft testing status and schedule impacts. Coordinate manpower requirements in support of all maintenance tasks, systems testing, discrepancy resolution, aircraft protection and flight tests.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Plan, schedule and complete tasks in order to meet service/delivery schedules. . Assist management, as required, with supervision and instruction of aircraft technicians in proper procedures and techniques of trouble shooting airframe and engine systems, routine inspections and preventive maintenance. Assist with performance appraisal of subordinates. Assess strengths and weaknesses of subordinates. Apply strengths for maximum job efficiency and provide guidance and growth opportunities to reinforce developmental areas. Provide diverse learning opportunities. . Ensure all required. components are ordered for timely availability. Send items out for rework/repair as needed. Receive and inspect upon return. Perform engine runs on aircraft as required. Maintain a current knowledge of Aircraft Service Changes (ASCs), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance tasks within the quoted or standard CMP time. Perform post and pre-flight inspection and trouble shoot mechanical malfunctions such as fluid leaks and minor structural damage. Follow standard operating procedures when operating ground support equipment, such as power supply, hydraulic rig, nitrogen filler cart, and oxygen service cart. Operate and supervise use of special support equipment used in removal and installation of major components. Assist in maintaining work schedules and updating of CMP cards. Review work, including forms and records, to ensure compliance with Gulfstream Repair Station procedures and FAA Airworthiness Standards. Review daily job charging to ensure accuracy of charges to aircraft.Additional Functions: Apply 6S and Lean Initiatives to maintain good housekeeping and safety in all areas to include hangars, break areas, and offices. . Help develop goals for subordinates and Support the company OGSM at the floor level. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and heavy maintenance (i.e Aircraft component removal and installation, flight control rigging, engine removal, installation, rigging, schedule and unscheduled inspections, and major or minor sheetmetal/structural repairs or alterations). Advanced working knowledge of pertinent technical reference materials (maintenance manuals, IPCs and structural repair manuals, service bulletins, Airworthiness Directives, etc.). Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221232Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 10/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technicianin GAC SavannahUnique Skills:Let your career take flightEducation and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 219457Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 05/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Structural Mechanic IVin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 6 years related structural assembly experience. Experience working with Solumnia and Smarteam preferred.. Q-stamp preferred. Position Purpose:In a team oriented work environment, independently performs a variety of structural assembly operations using required. tools and appropriate prints, specs and operational requirements to complete work assignment, and ensure conformance to specification. Assists and instructs other team members. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use ability as a skilled specialist to contribute to the development of employees and techniques and completes work in innovative and effective ways . Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements . Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . Ability to move to new tasks with minimal, short-term impact to established goal hours and schedule . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structures . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size for rivets, hole pattern for rivets, cutand form plastics and follow standard operating procedures when using adhesives, sealants and solvents . Check all work and ensure a defect free assembly prior to final inspection . Mentor, train, and assist other team members in interpretation of blueprints, drawings, and engineering orders; develop methods and shop aids to resolve production installation difficulties and problems . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assembles parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Plan and organize workloads and resource requirements to meet or exceed goal hours and schedule expectations. Assist in overseeing projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks . Maintain a neat and orderly work area, supports the company 5S, Lean Initiative Program, and complies with all safety regulations . Support Lean Activities, comply with all safety, 5S, and housekeeping policies .Perform other duties as assigned.Other Requirements: Good working knowledge of computers and related software. Must be able to read and interpret blue prints. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. Should be able to use all tools required. to do the job. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. Thorough knowledge in the use of multiple measuring devices, demonstrated ability to use within specified tolerance. Must be able to work any shift. Must be able to lift 50 lbs. Must be able to climb ladders, stands, stairs and work in small spaces and/or restricted areas. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223327Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/19/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-JP1

Avionics Technician (Completions)inGAC SavannahUnique Skills:Our aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 223275Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 11/11/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT

Senior Aircraft MechanicinGAC SavannahUnique Skills:Hiring for Second Shift: Mondays through Thursdays - 3:30 PM-2:00 AM.Education and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 223209Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 11/18/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft.#LI-SJT

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 223002Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 11/20/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 223002Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 11/20/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Aircraft Technician Sr A&Pin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 4 years Aviation Maintenance experience to include 3 years of experience working on mid/large size aircraft required.. Corporate aircraft experience preferred.. Other FAA Airframe and Powerplant Mechanic Certificate required. Valid Driver’s License required. Position Purpose:Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform required. periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting. . Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components. Coordinate movement of aircraft as required. . Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components. . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed.Additional Functions: Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers. . Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Additional InformationRequisition Number: 223002Category: Service CenterPercentage of Travel: Up to 25%Shift: Weekend DaysEmployment Type: Full-timePosting End Date: 11/20/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft#LI-CV1

Structural Mechanic II - Special Missionsin GAC SavannahUnique Skills:Must be able to read and interpret paper aircraft prints.Must be able to work any shift.Education and Experience RequirementsHigh School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Position Purpose:In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure . Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . Check all work and ensure a defective free assembly prior to final inspection . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required. Able to work with minimal supervision on duties and tasks . Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Properly use and maintain company-provided tools and equipment and returns items to tool room after use . Ensure standard operating procedures are followed when operating ground support equipment .Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . Ensure accurate daily job charging to the aircraft . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . Assist in maintaining shop equipment and associated JSAs . Support Lean Activities .Perform other duties as assigned.Other Requirements: Must be able to read and interpret blue prints. Basic computer skills and basic shop math skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222945Category: OperationsPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 10/17/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Equipment Maintenance Tech Sr. - 2nd Shiftin GAC SavannahUnique Skills:Must be able to work 2nd shift and trouble shoot voltage up to 3 phase 480 volts. Know PLC and Drives.Education and Experience RequirementsHigh School Diploma or GED required. 5 years experience working with electrical controls and mechanical applications in a manufacturing environment, to include experience working with aircraft related production, equipment in the aerospace industry. 2 year technical degree may offset one year of experience. Position Purpose:Under minimal supervision provides advanced experience with respect to electrical, hydraulic, mechanical, and pneumatic systems for troubleshooting, repairs, upgrades and preventative maintenance to all aircraft related production equipment.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Diagnoses cause of electrical and mechanical malfunction or failure of operational equipment and apply corrective action to resolve re-occurring issues. Proactively conducts Preventive and Predictive Maintenance inspections and performs required. duties in accordance with recommended schedules. Performs repairs and corrective maintenance to equipment with a high degree of quality and reliability so that the equipment is capable of operating within the required. specifications. Performs setup and calibrations on scheduled intervals for all aircraft related production equipment. Regularly performs backups of process parameters and PLC programs for all equipment. Daily input of required. data in CMMS system for machine reliability and control. Ability to implement project objectives on key pieces of automated equipment with minimal guidance. Recommends or initiates modification or replacement of equipment components which fails to meet acceptable operating standards. Submits parts request on critical spares identified as non- stock items.Additional Functions: Interfaces daily with key Management and Production personnel regarding all Automated Equipment. . Assists with Engineering in all acceptance testing and training. .Perform other duties as assigned.Other Requirements: Ability to work any shift. Demonstrated working knowledge of electrical, mechanical, and controls aspects of factory automation systems and the integration of devices used. Knowledge of Programmable Logic Controllers (Allen Bradley & Siemens Controls preferred). Background in CNC Equipment (Mazak, Mori Seiki, Fryer, Alpha Harrison, Broetje, Kuka preferred). Background in GSE Equipment (Hobart, Unitron, Tronair, Lektro Tug preferred). Must be able to read electrical schematics and blue prints. Working knowledge of replacing spindles, ball screws, linear guide ways, bearings, hydraulics repairs, and precision machine alignments (Laser Alignment experience a plus). Experience in the alignment of turrets and the installation of ball screws is a plus. Working knowledge of PC based Microsoft office. Experience with computerized maintenance management software relevant to spare parts management, work order creation, and Preventive Maintenance preferred. Additional InformationRequisition Number: 218761Posting Type: Internal-ExternalDepartment: J0471-FAC GSE AT ManageCategory: FacilitiesPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timeSalary Grade:N10Number of Openings: 1Posting End Date: 07/26/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic V - Special Missionsin GAC SavannahUnique Skills:Must have Special Missions experience - Multiple shiftsEducation and Experience RequirementsHigh School Diploma or GED required. 8 years aviation sheet-metal and/or fabrication experience to include at least 1 year of aerospace heavy structures modification such as Special Missions. Valid Driver’s License required. Position Purpose:The Special Missions Structural Mech V is a technical expert that works with a high degree of accuracy and timeliness under minimal supervision to safely fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train others.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . Mentor and train as required. Review their work prior to sign off to ensure work complies with quality control standards . Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents . Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications . Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP) . Conduct monthly 5S audits, as required. Use the material tracking system to create parts demand, track squawks and to sign-off work . Assist in developing initiatives to meet individual OGSM requirements, as required. Assist management, as required. with supervision and instruction of technicians in proper procedures and techniques .Perform other duties as assigned.Other Requirements: FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. Advanced knowledge of sheetmetal and fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Demonstrates excellent communication skills, both verbal and written. Adapts to sudden schedule changes. Able to use tools and equipment associated with sheetmetal work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with MicroSoft Office suite. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223525Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician Iin GAC SavannahUnique Skills:Ability to work first or second shifts and overtime.Education and Experience RequirementsHigh School Diploma or GED required. Two (2) years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams.Position Purpose:Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 221683Category: Service CenterPercentage of Travel: Up to 25%Shift: SecondEmployment Type: Full-timePosting End Date: 09/30/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician IIin GAC SavannahUnique Skills:Must be able to work any shift as assigned by Service Team Manager.Let your career take flightGulfstream employees benefit form a total rewards package that includescompetitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.. Valid Driver’s License required. Position Purpose:Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) . Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas. Provide training to less experienced technicians. . Protect customer property (PTP).Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Implement and apply Lean/continuous improvement processes to all areas of responsibility. . Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk. . Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221062Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Technician IIin GAC SavannahUnique Skills:Multiple shifts available. Must be willing to support flight operations on multiple models of AC. Strong live AC avionics experience preferred.Education and Experience RequirementsHigh School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose:Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes.Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Additional InformationRequisition Number: 222289Category: Service CenterPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic IIin GAC SavannahUnique Skills:N/AEducation and Experience RequirementsHigh School Diploma or GED required. 2 years related structural assembly experience. Experience working with Solumina and Smarteam preferred.. Position Purpose:In a team oriented work environment, under minimal supervision, Structural Mech II performs a variety of structural assembly operations in a production department following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Safely perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. Safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft . Rivet structural assemblies and parts using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure . Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets, cut and form plastics and follow standard operating procedures when using adhesives, sealants, and solvents . Check all work and ensure a defective free assembly prior to final inspection . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs) . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. Utilizing proper tooling, shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity . Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. Use personal protective equipment as required.Additional Functions: Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags . Ensure accurate daily job charging to the aircraft . Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership . Assist in maintaining shop equipment and associated JSAs . Support Lean Activities .Perform other duties as assigned.Other Requirements: Must be able to read and interpret blue prints. Basic computer skills and basic shop math skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces or restricted areas & lift 50 lbs. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 223605Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 11/14/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Structural Mechanic I - Special Missionsin GAC SavannahUnique Skills:Must have knowledge of basic aircraft blueprintsEducation and Experience RequirementsHigh School Diploma or GED required. 1 year related structural assembly experience. Experience working with Solumina and Smarteam preferred.. One year experience credit considered for graduates of Savannah Tech Aircraft Structures Technical Certificate Program. Position Purpose:In a team oriented work environment, under moderate supervision, performs a variety of structural assembly operations in a production department.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet FAA requirements, customer specifications, and Gulfstream standard of quality . Rivet structural assemblies and parts, including sheetmetal parts, using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets) . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets. Check all work and ensure a defective free assembly prior to final inspection . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). Use resource planning system to enter daily labor against correct Work Order and Item numbers . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . Maintain a neat and orderly work area, supports the company 5S Program and complies with all safety regulations . Work under moderate supervision on duties and tasks . Support Lean Activities .Additional Functions: Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Keep shop and aircraft work areas clean and uncluttered . Properly care for and maintain shop equipment and tools as assigned by Supervisor . Comply with safety rules and procedures .Perform other duties as assigned.Other Requirements: Basic knowledge of various aircraft structures, sheetmetal, and fabrication processes. Ability to read and interpret basic blueprints. Read and interpret 6" scale. Basic computer skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to lift 50 lbs. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 222964Category: OperationsPercentage of Travel: Up to 25%Shift: FirstEmployment Type: Full-timePosting End Date: 10/17/2024Equal Opportunity Employer/Veterans/Disabled.Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Aircraft Technician Iin GAC SavannahUnique Skills:This posting is for all Savannah Service Centers.Must be able to work any shift as assigned by Manager.A&P license recommended.Upcoming graduates with their A&P certificate will be considered.Sucessful completion of licenses must be obtained prior to employment.Let your career take flight!Gulfstream employees benefit form a total rewards package that includes:competitive compensationmedical, prescription, dental and vision coverage starting on day 1retirement savings planwith a generous 6% 401k match – immediate vestingVisit https://outsidegulfstream.com/benefits to learn more about our benefits plans.Education and Experience RequirementsHigh School Diploma or GED required. FAA Airframe and Powerplant certificate or 2 years of aviation maintenance experience. . Valid Driver’s License required. Position Purpose:The Aircraft Technician I, under close supervision, performs or assists with inspection, maintenance, and repair of basic aircraft systems and structures.Job DescriptionPrinciple Duties and Responsibilities:Essential Functions: Communicate as required. to receive and understand work assignments. Perform basic aircraft inspections, repairs, and modifications under close supervision. Assist with movement of aircraft as required. Properly complete CMP cards, work order sign-offs, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic power units, hydraulic lift platforms, forklifts, compressed gas cylinders, etc.) . Ensure all customer property is properly protected.Additional Functions: Use material tracking system to create parts demand, and to charge labor to Work Orders, items, and squawks. . Properly collect and dispose of waste fuel, oil, hydraulic and de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. . Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use. . Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address and report unsafe conditions before putting people or property at risk. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. .Perform other duties as assigned.Other Requirements: Working knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures. Must be able to read, write, speak, and understand the English language. Additional InformationRequisition Number: 221063Category: Service CenterPercentage of Travel: NoneShift: FirstEmployment Type: Full-timePosting End Date: 12/31/2024Equal Opportunity Employer/Veterans/Disabled.#LI-JH1Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee.Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company.Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft