Cedar Rapids, IA 52402 • (28.1 miles) • Full Time • 10/18/2026

Position: Device Engineer Job Description: What You'll Be Doing: Perform Development and Verification for Flight Management system for avionics applications. DO 178 DAL A verification Developing High Level and Low Level requirements from system requirements Analyze System level architectural requirements and use it for Design and Development of Software Requirements. Providing technical analysis by reviewing the artifacts What We Are Looking For: Bachelor’s Degree in Electrical or Computer Engineering. Development of Test cases and Test procedures execution. Generation of Test results and reports for the execution. Developing support utilities to reduce the cycle time and enhance the process. Perform Dry Run and RFS related activities. Co-ordination and team player What’s In It

Cedar Rapids, IA • (26.8 miles) • Full Time • $25.00 to $40.00 / hr • 10/23/2026

Pay: $25.00 – $40.00/hour Travel Requirement: 100% full-time travel to one of our project sites nationwide. All travel expenses covered by the company and per diem is paid. Current travel locations include but are not limited to Monroe, LA, Conesville, OH, Cedar Rapids, IA, and Salt Lake City, UT. LINX is hiring a Low Voltage Quality and Training Specialist to own QA/QC for fiber and copper cabling installations on hyperscale data center projects, paying $25.00 to $40.00 an hour. You'll inspect completed work against BICSI and TIA/EIA standards, catch and correct problems before they become the customer's problem and train the crews doing the installing. This is a hands-on quality role, not a desk audit job. Daily activities include: job-site inspections, pre- and post-installation quality

Waterloo, IA 50704 • (36.7 miles) • Full Time • $34.00 to $36.00 / hr • 10/23/2026

Job Title : Materials Engineer I - Materials Engineering/ Materials Engineering Technician Contract length : Long Term (24+ months) Position Type : W2 Contract Description : Maintenance Technician background would also be a good fit. MAJOR PURPOSE : This job is for a Materials Engineering lab technician whose everyday assignments and tasks may vary from routine to infrequent. Duties are relatively broad in scope and may require evaluations by the position holder. The holder of this position will perform materials engineering supporting tasks or complex laboratory analytical functions with limited engineering oversight. MAJOR DUTIES : Description of the major duties performed in this job. • Completes tasks involving preparation or analysis of material samples/components/processes with minor

Marion, IA 52302 • (32.5 miles) • Part Time • $40.00 to $58.00 / hr • 10/21/2026

Job Title: Mechanical Designer Job Description The Mechanical Designer develops innovative mechanical concepts for new products with a strong focus on packaging and enclosures. This role combines hands-on 3D modeling, detailed documentation, and cross-functional collaboration to convert customer requirements into practical, manufacturable solutions. The position offers a flexible schedule, opportunities to work on cutting-edge prototype designs, and involvement from concept through production. Responsibilities Design conceptual mechanical solutions for new products, with emphasis on packaging and enclosures for electronic systems. Develop detailed 3D models and 2D drawings using SolidWorks or similar CAD tools to support product development. Collaborate closely with electrical, software, a

Waterloo, IA • (34.9 miles) • Full Time • $35.00 to $38.00 / hr • 10/20/2026

Job Title: Tactical Supplier Quality Engineer Location: Waterloo Works – Tractor Operations Shift: 1st shift (7 am to 3:30 pm) – Overtime may be scheduled at end of shift As a Tactical Supplier Quality Engineer for John Deere Tractor Cab Operations located in Waterloo, Iowa, you will.... • Work with suppliers to contain quality issues in support of 24-hour containment of supplier quality issues with the business unit. • Coordinate significant containment activities for both quality and design related issues with the business unit to ensure containment is complete. • Initiate corrective action and closure for recurrences significantly affecting FPY, resulting in line down time or significant repair. • Responsible for managing proper disposition and action of data related to supplier quality

Cedar Rapids, IA • (26.8 miles) • Full Time • 10/20/2026

Company Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success. Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority

Cedar Rapids, IA 52404 • (26.6 miles) • Full Time • 10/17/2026

PURPOSE The Mechanical BIM/VDC Detailer will develop 3D models, partnering with the construction team to coordinate and clash model content. Using the coordinated model, the BIM/VDC Detailer will produce spool, coordination, and install drawings, as well as review completed work, to include checking for errors and verifying against contract documents. This person will create and develop relationships supportive of the Baker Group Core Focus with internal team members and external clients, as well as maintain and grow the “Client for Life” concept with new and existing clients. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required a

Cedar Rapids, IA 52404 • (26.6 miles) • Full Time • 10/17/2026

The Subassembly Assembler position proficiently produces quality assemblies in one (1) of the following work centers including gear case, spinners, chain shields, and/or final subassembly. Key Responsibilities RESULTS | 50% Critical Verifies assembly by visual inspection and utilization of measurements specified on prints and procedures. Completes work assignments within standard guidelines of time and quality. Performs quality checks on work completed. Productivity / Job Knowledge Assembles some mechanical, electrical, and hydraulic components. Accurately reads prints and assembles parts accordingly. Assists with training of others as needed. Keeps work area clean and orderly, performs required PM’s on machines and equipment and reports all non-conformities to Line Lead, Supervisor or Mai

Cedar Rapids, IA 52404 • (26.6 miles) • Full Time • $30.00 to $39.00 / hr • 10/16/2026

Maintenance Technician – New Mexico (Relocation Opportunity) Are you an experienced Maintenance Technician looking to put your expertise to work on highprecision metalworking equipment and open to relocating to New Mexico? Join Productivity, Inc. a leader in machine tool sales, service, and automation integration since 1968. We’re looking for a skilled Maintenance Technician with industrial maintenance experience and formal electrical trainingto support customers with maintenance, troubleshooting, and repair of advanced production equipment. This role supports our customers throughout New Mexico (primarily Albuquerque and surrounding areas). Candidates outside the region are encouraged to apply relocation assistance is available. What You’ll Do Diagnose, repair, and maintain a variety of C

Waterloo, IA • (34.9 miles) • Full Time • 10/16/2026

Job Title: Manufacturing Engineer II Client: Heavy Machine Manufacturing Company Duration: 24 months (possibility extension) Location: Waterloo, IA 50704 Shift: 1st Shift: 7:00 AM – 3:30 PM Description: The Manufacturing Engineer II – Assembly will plan, coordinate, and perform manufacturing engineering activities supporting assembly operations at John Deere's Waterloo Works – Tractor Operations facility. This role focuses on improving manufacturing processes, developing engineering solutions, supporting product development, and ensuring production processes meet established cost, quality, safety, and regulatory requirements. The engineer will work collaboratively with manufacturing, engineering, quality, maintenance, suppliers, and other cross-functional teams to troubleshoot issues, impl

Hiawatha, IA • (26.3 miles) • Full Time • 10/14/2026

Assembly Technician Text ASSEMBLY to to apply today. Hiawatha, IA Multiple Shift Options Available Competitive Pay + Overtime Opportunities We're hiring Assembly Technicians to join a growing manufacturing team. This role is ideal for candidates with assembly, manufacturing, mechanical, warehouse, or general labor experience who enjoy working with tools and building products in a fast-paced production environment. Responsibilities Assemble products using hand tools, air tools, and power tools Follow work instructions and assembly processes displayed on computer screens Lift and position parts onto assembly lines using proper lifting techniques and hoists when needed Operate tools such as air rivet guns and battery-powered drills Inspect completed assemblies for quality and accuracy Read bl

Cedar Rapids, IA • (26.8 miles) • Full Time • 10/14/2026

Company Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a

Cedar Rapids, IA 52404 • (26.6 miles) • Full Time • 10/13/2026

Earn Up to $39.40/Hour in Your First Year Day-One Benefits | Paid Training | Career Growth| Work Only Half the Year PMX Industries is hiring skilled Industrial Electricians to join our team in Cedar Rapids, Iowa. If you're looking for excellent pay, outstanding benefits, career growth, and the opportunity to work with advanced manufacturing equipment, PMX offers a stable and rewarding career. Why Join PMX? Competitive Pay Starting pay up to $37.35/hour based on experience and skill Progress to $39.40/hour within your first year Additional $0.70/hour night shift differential Benefits Starting Day One Medical, Dental, and Vision Insurance Health Savings Account (HSA) and Flexible Spending Account (FSA) 401(k) Retirement Plan Short-Term and Long-Term Disability Coverage Single and Family Cove

Cedar Rapids, IA 52404 • (26.6 miles) • Full Time • $90,000 to $110,000 / yr • 10/8/2026

About the role The Refrigeration Engineer is responsible for the hands-on engineering, design, and technical execution of industrial refrigeration and process utility systems. This role partners closely with sales, project management, field teams, and customers to analyze, design, and implement systems utilizing ammonia, CO, synthetic refrigerants, chilled water/glycol, and steam. Responsibilities Support full design-build engineering efforts for industrial refrigeration projects. Create, review, and issue engineering drawings, redline markups, and P&IDs. Perform engineering calculations, including mass and energy balances, heat gain and product load calculations, and equipment, piping, and valve sizing. Develop refrigeration system solutions that meet customer operational needs. Prepare p

Cedar Rapids, IA 52403 • (31.8 miles) • Full Time • $46,800 to $58,000 / yr • 10/2/2026

We are seeking a dependable, positive, and motivated individual to join our construction team. this position involves teaching hands on construction skills while mentoring men who are working towards lasting sobriety, personal growth, and successful reintegration into society. The ideal candidate will demonstrate strong leadership, patience, a willingness to teach, and a commitment to Christian values, while still maintaining deadlines. This role offers a unique opportunity to make a meaningful difference in the lives of others through Faith, Mentorship, and skilled craftsmanship. \nCompany Description Christian non-profit organization that helps men integrate back into society after incarceration or addiction. through job training sobriety and Jesus Christ! This job has a Mon-Thurs work w

Waterloo, IA • (34.9 miles) • Full Time • $65,000 to $75,000 / yr • 10/1/2026

Looking for a change? You want to work with a company with great benefits and a flexible schedule? Be a part of a solution to help companies be more successful and keep more jobs in the US? We are looking for strong candidates that are problem solvers and have a great attitude. Work with large manufacturers to make a difference in the output and performance of their company. You can help them identify and help fix the issues they are having. Work with the tooling companies to help find solutions and then run the tests to prove them out. Get to be in the know of the new tools coming out and also be able to try them. This is a rewarding position that will have you wanting to go to work every day. The ideal candidate loves talking to people and proactively solving issues. You will be responsi

Iowa City, IA 52246 • (39.3 miles) • Full Time • 10/1/2026

Light Equipment Operator Location: I owa City, IA Shift: 3:00PM-11:00PM (Hours may vary) Schedule : Monday-Friday (Days may vary) Pay: $17.00/hr. Join our team as a Light Equipment Operator in a hands-on, fast-paced environment! You’ll help keep equipment running smoothly, learn multiple production roles, and gain valuable skills while contributing to a safe and efficient workplace. Job Duties: Troubleshoot and maintain equipment to ensure it stays in running condition Request maintenance when necessary Read, understand, and follow Standard Operating Procedures (SOPs) for all job functions Learn and perform responsibilities of the Press Service position Learn and perform responsibilities of the Forms Packer role Backup Ink/Cage responsibilities as needed Why Work With Advance Services, Inc

Waterloo, IA 50701 • (29.8 miles) • Full Time • 10/1/2026

Industrial Maintenance Technician Waterloo, IA BHS Corrugated North America is seeking an Industrial Maintenance Technician to support advanced manufacturing equipment at a customer site in the Waterloo, IA area. Responsibilities Perform preventive and corrective maintenance on industrial equipment. Troubleshoot electrical, mechanical, hydraulic, and pneumatic systems. Diagnose and repair equipment issues to minimize downtime. Support PLC-controlled machinery and automated equipment. Complete maintenance documentation and work orders. Follow all safety procedures and company policies. Qualifications 3+ years of industrial maintenance experience preferred. Experience with electrical and mechanical troubleshooting. Knowledge of motors, drives, sensors, hydraulics, and pneumatics. PLC trouble

Cedar Rapids, IA 52404 • (26.6 miles) • Full Time • 9/30/2026

4150 C St SW, Cedar Rapids, IA 52404 | Office: www.cellsitesolutions.com Remanufacturing Technician Job Summary: The Remanufacturing Technician is responsible for performing general construction and maintenance work at various locations and customer sites in relation to telecommunications shelter structures. They work under the supervision of a crew lead or foreman and are the face of our company, delivering high-quality work to ensure customer satisfaction. The Remanufacturing Technician must possess excellent interpersonal communication skills, as well as the ability to perform basic construction, electrical, and mechanical work. The main duties and responsibilities of this position include, but are not limited to, tearing out and installing floors, walls, doors, outlets, painting, and f

Cedar Rapids, IA 52401 • (27.8 miles) • Full Time • $70,000 to $85,000 / yr • 9/30/2026

Lattner Boiler Mfg Co is seeking a QC Manager for overseeing ASME construction on Boilers, Pressure Vessels and Power Pipping. Responsibilities include but are not limited to oversight of generating, reviewing, approval, distribution and revisions of all aspects of the manufacturing and coordinating of the construction of Lattner products. \nCompany Description Lattner Boiler manufactures industrial electric and gas-fired steam and hot water boilers. Company Description Lattner Boiler manufactures industrial electric and gas-fired steam and hot water boilers.

Marion, IA 52302 • (32.5 miles) • Full Time • $28.03 / hr • 10/10/2026

EQUIPMENT OPERATOR - PARKS Open until filled. First review of Candidates is October 19, 2026. Job Title: Equipment Operator Civil Service: No Department: Parks and Recreation Bargaining Unit: AFSCME Reports to Position: Parks Maintenance Manager Location: Thomas Park Overtime Status: Hourly FLSA Status: Non-Exempt JOB SUMMARY Under limited supervision, performs a variety of skilled and advanced skilled duties including the safe and efficient operation of assigned equipment in the construction and maintenance of park grounds and facilities. Direction and review is received by Parks Maintenance Manager. May lead, direct, and review work of assigned seasonal and full-time staff during supervisors’ absence. Overtime hours may be required by weather or workload. ESSENTIAL JOB DUTIES/WORK PERFOR

Waterloo, IA • (34.9 miles) • Full Time • $33.00 to $35.00 / hr • 10/24/2026

Materials Engineering lab technician/Maintenance tech Fully onsite 44478 35.00 AN HOUR W2 Contract 11/02/2026 to 10/31/2028 MAJOR PURPOSE: This job is for a Materials Engineering lab technician whose everyday assignments and tasks may vary from routine to infrequent. Duties are relatively broad in scope and may require evaluations by the position holder. The holder of this position will perform materials engineering supporting tasks or complex laboratory analytical functions with limited engineering oversight. MAJOR DUTIES: Description of the major duties performed in this job. • Completes tasks involving preparation or analysis of material samples/components/processes with minor engineering oversight for moderately complex activities. • Develop, recommend and implement analytical or proce

Coralville, IA 52241 • (37.3 miles) • Full Time • 10/22/2026

Description: Starting Salary: $58,000.00, based on experience, interview, and skills test Location: Cedar Rapids, Coralville, Iowa City Reports to: Store Team Leader Employment Type: Full-Time, Non-Exempt About New Pioneer Food Co-op New Pioneer Food Co-op is a community owned, value driven local food marketplace rooted in cooperation, sustainability, and shared success. We exist to strengthen the local food system while creating welcoming spaces for staff, members, and partners to thrive. About the Role The Prepared Foods Team Leader is responsible for the daily performance of the department, including product quality, food safety, team leadership, and operational execution across both production and service areas. This role ensures prepared foods offerings consistently meet New Pioneer s

Cedar Rapids, IA • (26.8 miles) • Full Time • $14.50 / hr • 10/17/2026

Now Hiring: Display Builders / Assemblers in Cedar Rapids. Shift: 7am - 3:30pm | Monday - Friday What You’ll Do: Unpack product and components Assemble retail display units according to instructions Load and package completed displays for shipment Work alongside team members to meet daily production and quality goals Perform other tasks as assigned What We’re Looking For: Ability to work in a team-based production environment Attention to detail and quality standards Ability to meet daily quotas Comfortable performing hands-on assembly work This is a great opportunity for someone who enjoys working with their hands, being part of a team, and having consistent weekday hours.

Independence, IA 50644 • (36.4 miles) • Full Time • 10/17/2026

Position Summary: The basic function of the Drill Press Department Supervisor is to supervise and coordinate the activities of workers engaged in operating a variety of industrial machines so that GMM may produce under the optimum conditions of productivity, efficiency, cost effectiveness and ease of operations. Essential Duties and Responsibilities include the following: Other duties may be assigned. Understand and promote "lean principles" throughout the company. Work with the team leaders/working supervisors to coordinate dispatch lists and routing of work assignments within the department. Schedule employee hours in relation to the amount of work in the facility. Optimize the resources (machines & employees) within his/her department. Meet the goals set by management on quality, effici

Waterloo, IA 50703 • (38.2 miles) • Part Time • $15.00 / hr • 10/16/2026

Everyone knows what ion nitriding, gas nitriding, carbonitriding, and induction hardening are... right? Nope... nope they sure don't! THAT'S OK! Join our team... we would love to teach you!!! AHT has been in the Industry for 40+ years! Our team has touched products that make the world stronger and safer. Our processes improve upon parts manufactured by other industries, including aerospace, defense, firearms, automotive, construction, agriculture, energy and medical... just to name a few. Are you familiar with the jaws of life, how about airplane landing gear, or perhaps the Mars Rover? Our employees processed parts that went to MARS! As part of our team, you will learn about metals, effects of our process on metal, and why quality is so important. You will become an expert in an industry

Cedar Rapids, IA • (26.8 miles) • Full Time • 10/10/2026

Company Description manufacturing company Job Description Senior Plant Manager / Production Manager / Manufacturing Manager / Operations Manager in Northern Iowa needed to run a metals machining and assembly operation of 100 people. Experience with CNC and manual machining, metal products assembly, parts making, machinery, fabricating equipment, or materials handling systems would be a suitable fit. This job is in a small town in northern Iowa. If you are willing to relocate, or live in that area, please apply. Work to maintain a safety-first culture Improve efficiencies in quality control and on-time shipments Oversee a production organization that keeps workers safe while maintaining cost control. Make decisions about operating and capital budget (P&L). Lead a team of people in productio

Waterloo, IA • (34.9 miles) • Full Time • $75,000 to $88,000 / yr • 10/8/2026

The Production Supervisor will be part of the manufacturing team in support of the Director of Operations and Production Manager. Manufactures products by supervising staff; organizing and monitoring workflow; acts as a quality inspector; serves as a safety coordinator, material handler, and trainer for the area of responsibility. DUTIES / RESPONISIBILITIES Complete production plan by scheduling and assigning personnel; accomplishing work results; establishing priorities; monitoring schedules; resolving problems; reporting results of the processing flow on shift production summaries. Accomplish manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job results; coaching, counseling, and disciplining employees; initiating, coordinating, and enfor

Cedar Rapids, IA 52404 • (26.6 miles) • Full Time • 10/16/2026

Central States Group, A Cogent Company, is seeking a Service Technician to join our team in Cedar Rapids, IA. In this hands-on role, you will be responsible for servicing, repairing, troubleshooting, and maintaining submersible pumps, motors, and other rotating equipment used in the water and wastewater industry. The ideal candidate will have a strong mechanical service backgroundsuch as automotive, heavy equipment, industrial maintenance, or similarand proven electrical and electro-mechanical troubleshooting skills. Experience working with electrical motors and single-phase and three-phase electrical systems is required. This is an excellent opportunity for a mechanically and electrically skilled technician who enjoys solving problems, working with customers, and continuously expanding th

Cedar Rapids, IA • (26.8 miles) • Full Time • $20.00 to $22.00 / hr • 10/6/2026

Plunkett's – Own Your Route – Set Your Schedule – Grow Without Limits At Plunkett's, our technicians do more than treat pests. They solve problems and help customers feel safe and comfortable. As a Service Technician, you'll manage your own route, provide pest control services, and build strong customer relationships. This Route services Cedar Rapids and the surrounding areas. __________________________________________________________________________________________________________________________ Training Pay is $20.00 - $22.00 Per Hour + Uncapped Sales Incentives! What Makes This Role Different You set your schedule Flexible hours mean you work when it makes sense. No micromanaging, no fixed 9-to-5. Plan your day, prioritize stops, and build lasting client relationships. Your own territo

Cedar Rapids, IA • (26.8 miles) • Full Time • 10/24/2026

At Dalton PHC, we’re proud to sponsor and mentor the next generation of HVAC professionals through our Apprenticeship Program in partnership with Hawkeye Community College . This is a structured, hands-on path into a high-demand career where you can build skills, earn a paycheck, and set yourself up for long-term success in the trades. Position Overview As an Apprentice HVAC Technician, you’ll be enrolled in a 4-year program that blends classroom learning with real job-site experience. You’ll work alongside licensed professionals on heating, cooling, and ventilation systems while attending classes at Hawkeye Community College. By the end of the program, you’ll have the skills and credentials to become a licensed journeyman HVAC technician. Why Choose the Apprenticeship Path? Earn While You

Wellman, IA 52356-9583 • (41.1 miles) • Full Time • 10/24/2026

Open Gates Group, based near Kalona, IA, is a family of companies dedicated to the growth and manufacturing of local dairy products. What began as a single creamery has grown into 11 businesses that source, produce, and deliver high-quality Midwestern products to over 3,500 stores nationwide. Our unique organic milk comes from grass-fed cows on small family farms, pasteurized at the lowest legal temperature, non-homogenized, and verified regenerative through Land to Market- which means that our cows are grazed in a way that enhances the environment, rather than harming it. As we continue to grow, we're investing in technology that improves efficiency, product quality, and food safety. We're looking for an Automation Controls Specialist who enjoys solving problems, building systems, and fin

Grinnell, IA • (32.6 miles) • Full Time • 10/24/2026

Mom’s Meals, the leading national provider of refrigerated home-delivered meals in the healthcare market, is hiring for a Quality Assurance Supervisor at our Grinnell, IA kitchen facility. The QA Supervisor assists in overseeing Quality and Food Safety Programs (HACCP-Meat, Poultry, Seafood, Vegetables; Labeling; GMPs; Internal Auditing, etc.), including implementation, staff training and documentation. #MomsMeals Position Responsibilities may include, but not limited to Assist in overseeing Quality and Food Safety Programs (HACCP-Meat, Poultry, Seafood, Vegetables; Labeling; GMPs; Internal Auditing, etc.), including implementation, staff training and documentation Work with USDA/FSIS Consumer Safety Inspectors, FDA and State Regulatory Inspectors; Assist in obtaining environmental and pro

Waterloo, IA 50703 • (38.2 miles) • Full Time • $17.00 to $19.00 / hr • 10/24/2026

We have an immediate opening for a Bindery Operator position at our facility in Waterloo, IA . Job Responsibilities Include: Determines printing job requirements by reviewing job specifications and assessing requirements for operation completion Sets up and uses various bindery machines for tasks involving sets of printed material, pamphlets, and other finishing operations of business forms and general printing Checks for quality, counts and other operation requirements Input information on computer for job/operation completion Supports shipping operation by wrapping/packing boxes, labeling, and preparing for carrier pickup using shipping software Other tasks as assigned Qualifications: Experience working in a print production facility or shop preferred Experience operating bindery equipme

Iowa City, IA • (41.8 miles) • Full Time • 10/23/2026

Company Description RR Donnelley is looking for a Press Operator 2 to join the Iowa City, IA location on 2nd shift! RRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the industry’s most trusted portfolio of creative execution and world-wide business process consulting, with services designed to lower environmental impact. With 22,000 clients, including 93% of the Fortune 100, and 32,000 employees across 28 countries, RRD brings the expertise, execution, and scale designed to transform customer touchpoints into meaningful moments of impact. Job Description Press Operator 2 - 2nd Shift (M-F, approx. 3:00pm to 11:00pm) starting at $22.37 per hour, plus a $2.00 per hour pr

Iowa City, IA 52240 • (44.1 miles) • Full Time • $22.00 / hr • 10/21/2026

Join Our Team and Shape the Future of Release Liners! Loparex LLC , a global leader in release liner manufacturing, is seeking dedicated and driven individuals to join our Iowa City team as Machine Operators . If you're looking for a challenging and rewarding career with a stable and growing company, this is your opportunity! As a Machine Operator, you'll play a vital role in our production process. You'll be responsible for operating and monitoring our state-of-the-art machinery, ensuring quality and efficiency. What You'll Do: Operate, maintain, and troubleshoot production machinery. Monitor product quality and make necessary adjustments. Utilize computer systems for data entry and reporting. Lead and support production associates. Maintain a clean and safe work environment. Adhere to st

Urbana, IA • (22.4 miles) • Full Time • 10/20/2026

Location: Urbana, IA We are seeking highly motivated, detail-oriented individuals to join our manufacturing team as a Manufacturing Associate . This role blends hands-on sewing and packaging responsibilities, offering the opportunity to contribute across multiple areas of production. Our success is rooted in getting our customers what they want, when they need it, while upholding our values and Brand Promise. Available Schedules: 1st Shift: Monday–Thursday, 7:00 am–4:00 pm; Friday, 7:00 am–1:00 pm 2nd Shift: Monday–Thursday, 12:00 pm–9:00 pm; Friday, 7:00 am–1:00 pm Compensation: Full-time positions starting at $19.00/hour Full-Time Benefits: Clickstop offers a competitive benefits package, including: Health Insurance with a $0 Premium option Dental & Vision Insurance PTO Paid Holidays Bir

Cedar Rapids, IA 52404 • (26.6 miles) • Full Time • $17.00 / hr • 10/20/2026

Overview Founded in 1967, ImageFIRST® is the largest and only national linen rental and laundry service specializing in the healthcare market. Acquired by private equity firm Calera Capital in 2018, ImageFIRST serves medical facilities nationwide providing linen, patient gowns, scrubs, and more while managing their clients’ linen inventory for cost management. As leaders in infection prevention, they currently own and operate the most HLAC-accredited facilities in the industry. With one of the highest customer retention rates in the industry – 97% – ImageFIRST is dedicated to improving patient satisfaction and making staff happy with our white glove service! Check out our company page: https://www.imagefirst.com/company/ Responsibilities Our Production Associates work together in a team en

Cedar Rapids, IA • (26.8 miles) • Full Time • 10/20/2026

Company Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description As a Senior Mechanical Engineer, you will partner directly with some of the world's largest technology companies and mission-critical clients to deliver complex, high-impact p

Cedar Rapids, IA 52401 • (27.8 miles) • Full Time • 10/20/2026

Electrical Engineer Hybrid | BSI Engineering Your Role at BSI Our Electrical Engineering team has many years of experience designing power distribution systems for clients in many different industries. Our Electrical Engineers work closely with our full-service team to ensure a fully integrated design package of the highest quality is provided. They assess client needs and create designs that ensure Code compliance and personnel safety, while achieving the client’s desired goals. Project scopes will range from full facility and process designs for greenfield projects to retrofits and upgrades of equipment in existing sites. Responsibilities and Scope Execute electrical engineering design scope for single and multi-discipline projects while ensuring compliance with all applicable codes and

North Liberty, IA 52317 • (33.4 miles) • Full Time • $30.00 to $37.00 / hr • 10/20/2026

$3,000 sign on bonus Professional Summary: Experienced Technician with a strong mechanical aptitude and experienced in diagnosing, repairing, and maintaining commercial refrigeration systems and auxiliary power units (APUs). Adept at troubleshooting complex issues, collaborating with cross functional teams, and delivery timely, high quality repairs in alignment with DOT and company standards. Skills Advanced Diagnostics & Troubleshooting APU & Refrigeration System Repairs Preventive Maintenance DOT Physical Compliance Strong Verbal and Written Communication Team Collaboration & Leadership Support Professional Experience Perform inspections, diagnostics, and full-scale repairs on refrigeration units and APUs for a wide range of commercial fleet vehicles. Collaborate daily with Service Write