Please Accept our Privacy Policy
Steel Technologies LLC
Mishawaka, IN 46545 • (32.6 miles) • Full Time • 11/20/2026
As a Mill Operator at Steel Technologies, you will review production orders to determine appropriate setup and operation of the mill. In this role, it’s important for you to be detailed and consistent in order to ensure only the best result for our customers. We rely on this position to continuously meet quality and customers standards. The regular hours for this position are Monday to Thursday 3:00 pm to 1:00 am (if overtime is necessary, hours are added to Friday and/or Saturday) How you’ll contribute to our company: Make and inspect mill set-up to ensure compliance with production instructions Reconcile coil identity to production and load coil Set-up Automatic Gauge Control (AGC) system and ensure correct calibration Thread coil through mill, cropping non-compliance material Review gauRBC Precision Products - Bremen, Inc.
Bremen, IN 46506 • (35.9 miles) • Full Time • 11/20/2026
ACCOUNTABLE FOR PRODUCTION AND QUALITY OF SMD MACHINES. ACCOUNTABLE FOR FOLLOWING PROCESS INSTRUCTIONS AS THEY PERTAIN TO SMD PARTS. PROVIDE THE SHIFT SUPERVISOR WITH RECOMMENDATIONS FOR REPAIRS, TOOLING, AND NECESSARY RAW MATERIALS. PROVIDE THE SHIFT SUPERVISOR WITH RECOMMENDATIONS TO IMPROVE THE EFFICIENCY AND QUALITY OF THE SCREW MACHINE DEPARTMENT. RESPONSIBLE FOR KEEPING SCREW MACHINE DEPARTMENT (INCLUDING CHIP-SPINNER) CLEAN AT ALL TIMES. ENSURE ALL MACHINE GUARDS AND OTHER SAFETY EQUIPMENT ARE INSTALLED AND IN WORKING ORDER AT ALL TIMES. PERFORM OTHER DUTIES AS ASSIGNED.Midwest Aerospace Casting, LLC
Crown Point, IN 46307 • (35.7 miles) • Full Time • $20.00 to $25.00 / hr • 11/19/2026
Description: We are seeking a highly motivated Tool Room Tech to join our team. The successful candidate will be responsible for maintaining company tooling and product equipment by ensuring that it is readily available and fully functioning. General Responsibilities: Work with pattern shops on tooling repairs and equipment modifications. Perform minor tooling repairs and experimental modifications. Perform tooling review for RFQs and customer requested audits. Coordinate/maintain the tooling maintenance program and applicable database. Assure that all company tooling and product equipment is in good condition, fully functional and available when needed. Assist with developing tooling budget and searches for various equipment in cases of upgrading those for improved manufacturing results.Flexible Concepts Incorporated
Elkhart, IN 46516-4713 • (42.1 miles) • Full Time • 11/19/2026
Description: Who We Are Flexible Concepts, Inc. has produced high-quality precision machined components since 1990 for the automotive, commercial, and U.S. Department of Defense industries. We are an ISO 9001:2015 Certified organization committed to quality, continuous improvement, and customer satisfaction. Position Summary The CNC / Swiss CNC / Mill Setup Technician is responsible for setting up, adjusting, and preparing CNC lathes, Swiss CNC machines, and milling machines for production. This position requires a strong technical background in machining processes, tooling, fixturing, and machine adjustments to ensure equipment is properly configured and produces quality components that meet customer specifications. The Setup Technician works closely with Engineering, Programming, QualityE Tech Group
New Buffalo, MI • (5.6 miles) • Full Time • 11/19/2026
At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Controls Engineer to be responsible for the development, implementation, testing and startup of technical solutions created by yourself or others, and frequent commuDakkota Integrated Systems
Chicago, IL 60633 • (40.6 miles) • Full Time • 11/19/2026
The role We are seeking a reliable and detail-oriented Production Operator to support daily manufacturing operations by safely operating production equipment and maintaining quality standards. This role is responsible for producing conforming product, supporting Dakkota’s Business Operating System, and ensuring compliance with all safety, quality, and process requirements. The ideal candidate is a safety-focused, team-oriented individual with a strong attention to detail and commitment to continuous improvement. This position is based on-site at our Chicago, IL facility and reports to the Department Supervisor as part of the Manufacturing/Production team. What You’ll Do Operate production tooling and equipment to meet established production, safety, and quality standards. Maintain tooling,Optimal Inc.
Elkhart, IN 46516 • (43 miles) • Full Time • $19.00 to $25.00 / hr • 11/19/2026
Optimal EV LLC is seeking an experienced Incoming Quality Inspector to join our Quality Department at our Elkhart, Indiana manufacturing facility. The primary responsibility of this position is to inspect incoming materials, components, and parts to ensure they meet established quality standards, engineering specifications, and customer requirements. The individual will be responsible for identifying and documenting non-conforming materials, supporting RMA and MRB processes, and maintaining accurate quality inspection records. When incoming inspection responsibilities are complete, this employee will provide additional support to warehouse operations, including receiving, inventory control, material handling, and general warehouse organization.CrossFire Group
Mishawaka, IN • (31.6 miles) • Full Time • 11/18/2026
Industrial Engineer I Position Summary The Industrial Engineer I is responsible for supporting manufacturing operations through the development and maintenance of production standards, labor planning, facility layouts, process improvements, and assembly line optimization. This role partners closely with engineering, manufacturing, supply chain, and other cross-functional teams to improve efficiency, support production goals, and drive continuous improvement initiatives throughout the operation. Essential Responsibilities Establish and maintain production standards, line balances, and staffing requirements for all phases of assembly operations. Develop and optimize material flow strategies, equipment layouts, and workstation configurations. Analyze labor and material requirements related toSolve IMG
LaPorte, IN 46350 • (8 miles) • Full Time • 11/18/2026
**We will consider candidates open to relocating for this opportunity** Solve Industrial Motion Group strives to be the trusted source for engineered bearings and power transmission solutions. Supported by a diverse range of products within Solve’s brand portfolio and our unmatched technical expertise, we have over 100,000 ready-to-ship components. At Solve we innovate with ambition, offering custom solutions in a wide range of applications. We obsess over our customers, leveraging our nationwide network for industry leading product availability, and best-in-class customer service. Our engaged team leads with integrity, and unites with purpose, driving toward innovation and continuous improvement every day. POSITION DESCRIPTION: The Industrial Engineer will be responsible for developing, iAttco Aerospace
South Bend, IN 46628 • (22.8 miles) • Full Time • $20.00 to $30.00 / hr • 11/17/2026
CNC Lathe Setup Technician - Precision Turning Do you take pride in owning the process from setup to first-good-part? Are you comfortable dialing in offsets on Inconel or titanium to hold tight aerospace tolerances? If yes, you’ll fit right in. What You’ll Do Set up CNC lathes: fixtures, tooling, workholding, offsets; verify programs before release. Produce aerospace components that meet stringent customer, engineering, and quality requirements. Read and apply complex blueprints, process sheets, and GD&T callouts. Perform first article, in-process, and final inspections using precision measuring instruments. Make minor program edits and offsets to sustain dimensional control. Monitor cycle performance; troubleshoot tool wear, chip control, chatter, and finish issues. Document production anThe New York Blower Company
LaPorte, IN 46350 • (8 miles) • Full Time • 11/16/2026
Knowledge of drawings and products is required. May be required to set up. grind tools and operate a variety of machines such as lathes, milling machines, broaches, drill presses, threading machines, band saws, grinders, keyseaters, manual shaft straighteners, hydraulic shaft straighteners, CNC machines, etc. This is not intended to be an all-inclusive list. Must work to specified tolerances with use of precision tools, such as scales, calipers, micrometers, protractors, fixed gauges, etc. May be required to lubricate machines Finishing or polishing shafts Includes incidental machining work such as drill tap, keyway and centering on all size shafting May be required to turn shafts when diameter must be reducedHarrison Consulting Solutions
South Bend, IN 46601 • (27.3 miles) • Full Time • $1 to $99 / yr • 11/16/2026
Growing national firm is seeking a Process-Mechanical Engineer for their South Bend office! Responsibilities: Plan/design water and wastewater systems (pumping, process and mechanical piping, and related valves and process equipment) Deliver quality work on time and within budget Strong communication/interpersonal skills Requirements: B.S. in Environmental, Mechanical, Chemical, or related engineering degree 8+ years of technical experience PE registration Participate in related professional associations preferred Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual oLECO Corporation
Saint Joseph, MI 49085 • (28.3 miles) • Full Time • 11/15/2026
Machinist 1-1 For over 90 years, LECO has been a leader in the development and production of world class laboratory instruments delivering state of the art products nationwide and across the globe. Located in St. Joseph, Michigan, LECO continues to be a family-owned company that understands the value of shared interests, long-term stability, loyalty, and trust. Schedule: 1st Shift, 5:00am – 1:30pm, Monday – Friday, with overtime scheduled as needed Position Summary: The Machinist 1-1 is responsible for the setup and operation of the CNC Machine Tools used to manufacture parts of varying designs and complexity. People in this job classification must be detail oriented and possess above average problem-solving skills. Previous experience with FANUC or Mitsubishi controls in an aerospace or mCTE Solutions
Plymouth, IN 46563 • (34.1 miles) • Full Time • 11/14/2026
Build More Than a Job-Build a Career at SpiTrex CTE At SpiTrex CTE, we invest in our people. You’ll find opportunities to grow, real flexibility, and a culture that values balance, development, and teamwork. Why join CTE? Career Growth: Ongoing training and development through Bamboo Path Track & WorkForge Flexibility: Flextime options that support real life Culture: Team events, Donut Fridays, food trucks, and more Rewards: Referral bonuses, quarterly bonuses, and a 401(k) with 50% company match (up to 10%) Benefits: No-cost vision, life, and short-term disability; dental & medical with HSA or PPO options Ready to grow with a company that values you? Join SpiTrex CTE. 1st Shift: Monday to Thursday, 6AM - 3PM; Friday, 6AM - 10AM Essential Functions: Read and interpret blueprints to determiJVIS
Benton Harbor, MI 49022 • (34.7 miles) • Full Time • 11/14/2026
SUMMARY: The C.M.M. Technician is primarily responsible for running C.M.M. programs based on CAD data or prints supplied by the customer and performing dimensional studies based on that data. The C.M.M. Technician has the authority to coordinate requests for layout inspection to ensure that results are provided to the appropriate parties in a timely manner to prevent project or engineering change scheduling delays. Reports functionally to the Quality Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Represent JVIS to the customer’s Quality Assurance function, attending customer required meetings and reporting open issues or concerns in a timely manner and responding when required with documented corrective action. Perform part layouts, capability studies, GRR & gage insHR Collaboration Group LLC
Elkhart, IN 46516 • (43 miles) • Full Time • $120,000 to $140,000 / yr • 11/14/2026
Senior Electrical Engineer This company is located in Elkhart, IN. Want to work in a collaborative and growing culture with exciting opportunities for expansion? Like working in teams to accomplish projects and support customers? Then, we have the place for you! What We Offer: Stable, exciting, and collaborative work environment Excellent wages and steady pay increases Comprehensive Health & Wellness Benefits Retirement Program with Excellent Employer Match Paid Vacation and Holidays Open communication, informal recognition, and bonuses! And much more to motivated, results-oriented individuals who want to make a real difference in their community and role! Who We Are: WFCO Technologies is a vertically integrated producer of power conversion and digital control systems serving the RecreatioCONN-SELMER INC
Elkhart, IN 46516 • (43 miles) • Full Time • 11/14/2026
Job Title: Piston Fabrication GENERAL RESPONSIBILITIES: Comply with all policies and procedures. Comply with all safety procedures and PPE requirements. Maintain a clean and orderly work area. Work within the team toward common purpose. Follow direction of supervisors. SPECIFIC DUTIES: Other duties as assigned. PRE-DETERMINED QUALIFICATIONS: Regular attendance. Must be able to understand written and verbal instructions. Ability to work accurately and quickly. PHYSICAL REQUIREMENTS: Must be able to lift 35 lbs unassisted. Frequent standing and walking. Ability to bring objects into sharp focus visually. Ability to work in team environment. Constant fingering and grasping. Ability to sit a majority of a shift, as needed. Ability to make judgments, perform repetitive work, attain tolerance toEngineering Economics, Inc.
South Bend, IN • (26.3 miles) • Full Time • $38.46 to $54.80 / hr • 11/13/2026
Mechanical Support Openings: Multiple About the Position: At EEI, we believe in doing things the right way, with excellence, integrity, and genuine care for our people. As an employee-owned company, our People First culture is rooted in trust, accountability, and shared success. As Mechanical Support for EEI’s Mission Critical team, you will help commission, test, and document mechanical systems in data centers and other high-reliability facilities. Working alongside experienced commissioning professionals, you will gain hands-on exposure to HVAC systems, chilled water systems, cooling infrastructure, controls integration, and field testing activities. This role is a strong fit for a developing technical professional, recent graduate, field technician, facilities operator, building engineeTekPro
Dyer, IN • (40.7 miles) • Full Time • $35.00 to $45.00 / hr • 11/13/2026
Company Overview: Our client operates a 120,000-square-foot manufacturing plant focused on precision machining and high-quality production standards. As a leader in the industry, the company values skilled maintenance professionals who can ensure the smooth operation and upkeep of critical machinery, contributing to overall plant efficiency and safety. Position Overview: We are seeking an experienced Maintenance Technician with specialized skills in CNC machine repair and a strong background in hydraulic, pneumatic, mechanical, and electrical systems. In this role, you will be responsible for maintaining, troubleshooting, and repairing CNC equipment, along with other essential plant machinery. This is an excellent opportunity to join a stable company with cutting-edge equipment and growthNippon Paint Automotive Americas
Lansing, IL 60438 • (41.2 miles) • Full Time • $17.39 to $25.75 / hr • 11/13/2026
At NPAA, we believe our employees are our greatest strength. We are proud to offer a generous and competitive rewards package, including: Earned Bonus Structure – annual merit increases, and an annual incentive bonus plan. Time Off & Holidays – 11 paid holidays each year, plus paid time off to support work-life balance. Health & Retirement – comprehensive health and welfare plans, along with a 401(k)program featuring an exceptional company match. Career Growth & Recognition – tuition reimbursement, employee recognition programs, and opportunities to grow within the organization. Culture & Community – as part of the NPAA family, you’ll enjoy company events throughout the year celebrating and appreciating our employees’ hard work and dedication. The position is scheduled for 2nd shift, withChicago Steel Holdings LLC
Gary, IN 46404 • (32.1 miles) • Full Time • $20.00 to $21.60 / hr • 11/12/2026
Exciting opportunity to join a friendly team and grow your career within a dynamic, thriving organization! Our Steel Service Center is currently looking to immediately fill a Slitter Helper position due to recent volume increases and demand for our specialized products and services. Candidates must have steel slitting experience! Responsibilities and Duties Setup overarm on recoiler according to work order Setup slitter for accurate slitting according to work order Setup for burr free slitting Change slitter heads for job change over Inspection of steel for defects Qualifications and Skills Past slitting experience (3yr minimum) Must be able to work any shift (morning, afternoon, night, graveyard) High School diploma or equivalency General computer knowledge Past experience in steel warehoUnited Petfood Producers USA Inc.
Mishawaka, IN 46544 • (33.7 miles) • Full Time • $90,000 to $110,000 / yr • 11/12/2026
Quality Engineer Raw Materials Your role As a Quality Engineer, you will be responsible for ensuring the quality of raw materials used in our production processes and for optimizing our NIRS (Near Infrared Spectroscopy) systems. Working closely with the local Quality & R&D teams, you will help ensure that only high-quality raw materials are selected, analyzed, and approved for use. You will evaluate and analyze incoming raw materials to ensure they meet established quality standards and specifications. You will investigate raw material deviations, identify root causes, and implement corrective and preventive actions in collaboration with suppliers and internal stakeholders. You will support the preparation and coordination of internal sensory evaluation panels, helping assess the quality aCHT USA
Cassopolis, MI 49031 • (42.6 miles) • Full Time • $25.00 to $31.00 / hr • 11/12/2026
+ 6% Shift Premium! At CHT USA, we foster a supportive workplace with competitive benefits, including medical, vision, dental, and life insurance starting on day 31. Our 401(k) plan allows participation in the first of the month after three months of employment, with a 3% company-paid contribution and full vesting from eligibility. We offer opportunities for growth, and we’d love to hear from you! Are you ready to take your career to the next level? We're looking for a dedicated 3rd Shift Chemical Operator (GMP) to join our team! In this role, you'll operate equipment and semi-automatic systems to transform chemicals into high-quality products. Key Responsibilities: Build production batches and complete batch documentation in compliance with cGMP and GDP standards Load/unload chemicals, opIntegrity Trade Services
Michigan City, IN 46360 • (4.9 miles) • Full Time • $29.00 to $35.00 / hr • 11/12/2026
Precision CNC Machinist, Mill-Turn Cell Lead Are you the mill-turn pro who thrives on complex setups and tight tolerances? Integrity Trade Services is teaming with a manufacturing client in Michigan City, IN to hire a seasoned operator who can independently set up, run, and troubleshoot both CNC mills and lathes. This is a direct hire role with an immediate start at a competitive rate. What’s in it for you? Compensation: $29–$35/hr DOE Schedule: First shift, four 10-hour days, Monday–Thursday; start 5:00 AM Overtime: As needed Benefits: Medical, Dental, Vision, PTO Could this be your next challenge? Ask yourself: Can you read complex prints with GD&T and immediately visualize the right workholding, tooling, and sequence? Do you enjoy dialing in offsets, speeds/feeds, and cutting parametersHiler Industries
Walkerton, IN 46574 • (22.4 miles) • Full Time • 11/10/2026
Precision Processes/Hiler Industries in Walkerton is HIRING! We’re looking for positive, hard-working team players to join our amazing team. How you’ll make a difference: We seek hardworking and reliable team members to grind, inspect, and finish metal castings in our Walkerton finishing facility. Success on this team means: Working with a High Level of Craftsmanship Achieving daily Targets with a drive for Top Performance Being comfortable with Physically Demanding, but Rewarding & Hands on Work Staying Flexible and Adapting to a growing, fun, and fast-paced environment Being on time and reliable each and every day What you’ll do: As a Grinding Team Member, you will be integral to the finishing of custom castings for our valued customers. Responsibilities include: Specializing in a specifConsolidated Metals Inc
Elkhart, IN 46514 • (41.4 miles) • Full Time • 11/10/2026
Description: JOB DESCRIPTION JOB TITLE: Tube Mill Utility SOC CODE: 51919800 DEPARTMENT: Tube Mill SUPERVISED BY: Tube Mill Supervisor RESPONSIBILITIES: Band material using a steel or plastic bander as it is transferred off the Mill. Operate a forklift. Accurately count and verify numbers of product produced. Print tags for Material produced off the mill. Band scrap material for ease of transportation. Assist on change overs for minimal downtime between production runs. Maintain a safe, clean, and organized work area for weekly inspections. Other duties as assigned. REQUIREMENTS: Ability to multitask in a fast paced physically demanding environment. Ability to work efficiently and safe in a team-based environment. Ability to adhere to company policies and procedures. Ability to follow instNRP Jones LLC
LaPorte, IN 46350 • (8 miles) • Full Time • 11/8/2026
Description: Position Overview : Operate 6 or 8 spindle screw machine to fabricate parts. Load steel bars into machine, cycle machine, detect malfunctions in machine such as warn or damaged cutting tools. Run productions lots, communicate with co-workers regarding production runs and maintain safe, organized and clean work environment. Essential Job Functions Operate one or more screw machines Read and understand blue prints Set up machine(s) for different parts being run and maintain acceptable setup times Able to sharpen tools Read micrometers and calipers Inspect and check quality of work as directed by foreman Maintain production efficiency Clean and lubricate assigned machines Qualifications: To perform this job successfully, an individual must be able to perform each essential duty sDwyerOmega
Michigan City, IN 46360 • (4.9 miles) • Full Time • $22.00 to $30.00 / hr • 11/8/2026
Description: Session: Summer 2027 Location: Michigan City, IN or South Bend, IN (On-Site) Duration: May-August 2027 (Full-Time) About the Company DwyerOmega is a globally trusted leader in manufacturing innovative instrumentation solutions for the Process Measurement, Automation, Control and HVAC markets. With very strong brand recognition and high levels of customer loyalty, DwyerOmega has an unmatched reputation for providing customized solutions that meet and exceed customer needs. Our team of engineering experts help our customers select technical, and often configured, product solutions for their unique applications. What You’ll Do We’re seeking a motivated engineering student to join our team this summer. This hands-on internship provides real-world experience in product design, testCITY PATTERN AND FOUNDRY COMPANY IN
Granger, IN 46530 • (33.6 miles) • Full Time • $18.00 to $22.00 / hr • 11/8/2026
Benefits: Employee discounts Health insurance Paid time off 401(k) Free uniforms Training & development Tuition assistance CNC Machine Operator CP Industries | Granger, Indiana | Full-time | 2nd Shift Job Overview CP Industries is looking for a CNC Machine Operator to join our growing team. In this role, you will run CNC mills to produce precision components that meet exact customer and quality specifications. The right person is detail-oriented, mechanically inclined, and takes pride in consistent, quality work. Duties & Responsibilities Operate vertical and horizontal CNC mills (3, 4, and 5 axis) using established setups and programs. Load and unload parts, monitor machine operation, and make basic offset adjustments as directed. Inspect parts with measuring instruments such as calipers,Linacast, Inc
Benton Harbor, MI 49022 • (34.7 miles) • Full Time • 11/8/2026
Description: Job Summary: Reporting to the Production Supervisor, the Finishing Team Leader assists and coordinates the activities of workers engaged in the finishing cell operations utilizing a wide freedom to act in driving activities to completion by energizing and engaging people in the area. Duties/Responsibilities: Role model for EHS and Quality performance – and enforces these issues with fellow associates. Ensure proper tagging of all product containers and racks. Ensure that applicable quality alerts / purges are posted at the casting cell and that direct reports are properly informed. Operate Finish Line as needed Closely monitor scrap and rate – instruct operator, correct issue, pull help chain as needed. Meet with assigned crew frequently throughout the day to discuss quality iAirxcel Inc
Elkhart, IN 46516-9090 • (42.1 miles) • Full Time • $60,000 to $80,000 / yr • 11/8/2026
Job Summary: The Manufacturing Engineer is responsible for creating and modifying detailed engineering drawings and models using SolidWorks, developing manufacturing processes, and providing technical support for steel and aluminum fabrication projects. This role involves collaborating with cross-functional teams, including production, quality, and sales, to ensure efficient and accurate manufacturing operations. The ideal candidate will possess a strong understanding of metal fabrication processes, possess excellent problem-solving skills, and have a solid foundation in engineering principles. Key Responsibilities: Design and Drafting: Create and modify detailed 2D and 3D drawings using SolidWorks. Develop assembly drawings and fabrication drawings used in manufacturing. Ensure drawings aBond Technologies, Inc
Elkhart, IN • (42.1 miles) • Full Time • $70,000 to $110,000 / yr • 11/8/2026
An engineer in this position develops and maintains software & occasionally electrical controls hardware for Friction Based Metal Processing Machines. Job Responsibilities: Interpret control requirements, especially software, from customer/internal specifications Develop flow charts, sequence of operations, and other high level controls documentation Primarily responsible for developing and maintaining Machine Controller software with a focus on new and advanced development items Programmable Logic Controller (PLC) software Primarily in IEC 61131 Structured Text, but some in Ladder Logic Computer Numerical Controller (CNC) software Primarily in IEC 61131 Structured Text Human Machine Interface (HMI) software (Using HMI builder software, like RSView) Assists in developing advanced Human MacPlacon Corporation
Elkhart, IN 46517 • (40.8 miles) • Full Time • $20.00 to $23.00 / hr • 11/7/2026
Machine Operator We're looking for a dependable Machine Operator to work at our Elkhart, IN facility in our Rollfed department to join our team. If you enjoy hands-on work, have strong mechanical aptitude, and want to grow in a fast-paced manufacturing environment, this is a great opportunity. No experience? We will train you. Compensation Starting compensation range, depending on experience: $20 - $23 per hour. 2nd shift differential = $1.00/hr. 3rd shift differential = $1.50/hr. Work Schedule 1st shift: 6 AM – 2 PM | Monday – Friday 2nd shift: 2 PM – 10 PM | Monday – Friday 3rd shift: 10 PM – 6 AM | Sunday - Thursday Why Placon – You'll Love It Here Machine Operators do hands-on technical work where your skills make a real impact Growth opportunities in thermoforming, quality, and procesNCW
Elkhart, IN • (42.1 miles) • Full Time • 11/7/2026
Position Summary: We are seeking a skilled Set-Up/Process Technician to support production operations in a plastic injection molding environment. This hands-on role is responsible for setting up and maintaining injection molding machines, robots, dryers, grinders, and related equipment to ensure safe, efficient, and high-quality production. The ideal candidate will perform mold and tool changeovers, prepare raw materials, troubleshoot machines and part issues, respond to equipment alarms, complete preventive maintenance tasks, and maintain a clean, organized work area. Responsibilities: Installing the correct molds/inserts into the correct machines Prepping and mixing raw materials for production Cleaning dryers, grinders, machine hoppers. Cleaning machine off; put all tools away after chaEdgewater Automation Llc
Saint Joseph, MI 49085 • (28.3 miles) • Full Time • 11/6/2026
A skilled machinist uses sophisticated computer-controlled equipment to produce machined metal parts for industries that demand precision components. Some of these industries include automotive, aerospace & medical equipment. A CNC machinist develops machining plans by studying blueprints, engineering plans, materials, specifications, machining parameters & interpreting geometric dimensions and tolerances (GD&T) CNC Operator Machinist Job Duties CNC machinists must be able to develop their own program to perform the cuts and shapes required by the engineering blueprint. They will be required to upload computer software, and program the machine to make parts from various materials, such as metal and plastics. Before beginning fabrication, the machinist must be able to interpret the parts deCavco Manufacturing LLC
Nappanee, IN 46550 • (44.2 miles) • Full Time • 11/6/2026
ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The Team Lead is responsible to ensure that teams are following all procedures for Electrical and Plumbing Systems Testing along with performing random audits as assigned by management. The Team Lead of Systems QC is responsible for these tasks at both the EAST and WEST manufacturing facilities. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaCAI
South Bend, IN • (26.3 miles) • Full Time • $91,300 to $107,300 / yr • 11/3/2026
THIS IS NOT A DATA ENGINEERING RELATED POSITION CAI seeks Mechanical Commissioning Engineers with a minimum of five to seven years' experience in Data Center Commissioning to support development and execution of all mechanical aspects of commissioning projects. Position Description: This position supports development and execution of all mechanical aspects of assigned commissioning projects from initial engagement, design reviews, checklists, safety support, script development, vendor coordination, testing and report development through turn over to the client. The Mechanical Commissioning Engineer will support the development of the mechanical test schedule, finalize mechanical test procedures, review project submittals for consistency with the design intent, basis of design and the ownerPolygon Company
Walkerton, IN 46574 • (22.4 miles) • Full Time • 11/2/2026
Description: The Manufacturing Engineer at Polygon supports the manufacturing operations through process optimization, continuous improvement, and technical problem-solving in composite part production. Working under the direction of the VP of Industrial Manufacturing, this role ensures that production processes are stable, efficient, and capable of meeting company goals in quality, delivery, cost, and safety. The Manufacturing Engineer will collaborate with production, quality, maintenance, and design engineering to develop and sustain world-class composite manufacturing processes. Requirements: Duties & Responsibilities Develop, document, and optimize manufacturing processes for composite lay-up, curing, machining, bonding, and finishing. Design and implement jigs, fixtures, molds, and pPMM - America's Technology Molder
South Bend, IN 46628 • (22.8 miles) • Full Time • 11/2/2026
Description: Are you passionate about quality excellence in plastic molding manufacturing? We are seeking a dedicated Quality Engineer to join our team in South Bend, IN. As a key player, you’ll ensure that our products meet the highest standards, delighting our customers and driving our success. Responsibilities: Ensure the highest quality standards in plastic molding manufacturing processes. Collaborate with cross-functional teams to develop and implement quality control procedures. Conduct OQ/PQ assessments to validate equipment and processes, ensuring compliance with industry standards. Lead PPAP (Production Part Approval Process) activities at all levels, from initial submission to final approval. Serve as an ISO-certified internal auditor, continuously improving quality management syPrecoat Metals
LaPorte, IN 46350 • (8 miles) • Full Time • 10/30/2026
Company Description Since 1961, Precoat Metals ( has been setting the standards in the coil coatings industry worldwide. We are committed to this level of quality in both our product line and customer service, and focus our resources on investigating and implementing new coil coating technologies, developing unique coatings, ink and film systems, and designing multifaceted prints while reducing the cycle time to market. We are able to achieve this "culture of excellence" thru the hard work and talent of the people on our team. Job Description Summary: The Visual Inspector is primarily responsible for visual and quality inspection of the finished products and determines the acceptability of finished product while immediately reporting any discrepancies from established standards. Must quickBlackRock Resources LLC
New Carlisle, IN • (14.8 miles) • Full Time • 10/30/2026
Technical Mechanical Engineer Overview: We have an exciting opportunity to join our client's Operations Team working on Data Center, Vehicle Manufacturing, or General Build Construction projects. Located in the vibrant community of New Carlisle, IN, this role offers a dynamic work environment with access to local amenities and a welcoming community. The position involves planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive construction projects. Technical support includes participation in construction planning and design, interpretation of design, application of construction methods, resolution and documentation of design conflicts, constructability reviews, and shop drawing processing. You'll also get to develop, implement, and aITU AbsorbTech, Inc.
South Bend, IN 46628 • (22.8 miles) • Full Time • 10/30/2026
ITU AbsorbTech is hiring a Production Operator to join our team in South Bend, IN. In this role, you will: Load and unload box trucks Sort, fold, separate and count received items Load, unload, and operate industrial-sized washers and driers * This is a physically demanding position that requires pushing, pulling, and lifting up to 50 lbs on a repetitive basis. Pay: $17.73 an hour + $0.50 shift differential for 2nd shift. 2nd Shift Schedule: 1:00pm to 9:30pm, Monday-Friday. No weekends, no holidays. Required Qualifications: - Ability to meet the physical requirements of the position (pushing, pulling, lifting up to 50lbs, standing/walking for an 8-hour shift) - A good attitude, team player, attention to detail, and a focus on safety Our benefits include: Medical, Dental and Vision InsurancCarpenter Co.
Elkhart, IN 46516 • (43 miles) • Full Time • 10/30/2026
Do you want to be part of a team that aspires to improve the quality of life for others? Are you interested in efficient manufacturing processes that promote sustainability? Do you feel a sense of accomplishment in a job well done? At Carpenter Co., we challenge our employees to learn from and inspire one another – all levels of the company collaborate, communicate and constantly improve to achieve shared success. If that sounds like an environment in which you will thrive, Carpenter Co. could be a great fit for you! Carpenter Co. has immediate opening for an Automated Slitter Operator in our Bedding Department on 1st shift [5am to 1pm] at our Elkhart, Indiana manufacturing plant. This position is responsible for the operation of machinery that cuts and packages foam bedding products. ThisContractor Company
Mishawaka, IN 46545 • (32.6 miles) • Full Time • 10/26/2026
INTRODUCTION TO AM GENERAL AM General develops and builds specialized ground vehicle systems that get the US Armed Services and our allies to and from their mission safely. Our innovative spirit delivers advanced, rugged, resilient, and dependable mobility solutions. We are one team dedicated to producing the best products for our customers. We have a collective understanding that at AM General our purpose is to serve those who serve to protect us. We R.I.D.E. with Sgt. Smith! We are R esponsive We have I ntegrity We are D ynamic We exhibit E xcellence PRINCIPLE DUTIES AND RESPONSIBILITIES Provide support to Quality Department during new model changes and future product development and engineering changes Works cross-functionally with all departments, Suppliers, and organization locationsHanson International, Inc.
Saint Joseph, MI 49085 • (28.3 miles) • Full Time • 10/24/2026
Lead Mold Maker Hanson International, located in St. Joseph, Michigan, specializes in the design, build, sample, and inspection of precision molds – primarily for the die cast industry. Hanson International is currently seeking a qualified candidate to fill a day shift lead mold maker position. DUTIES AND RESPONSIBILITIES: Project management. Machining of die components in a CNC machine tool (Milltronics preferred). Fitting die components to cavity and holder blocks Die spotting and bluing. Assembly and disassembly of dies. Plumbing of cooling circuits. Understand all machining processes used in mold/die manufacturing. EXPERIENCE: 5 years in building die cast dies. Journeyman mold maker certificate. CANDIDATE REQUIREMENTS: High School diploma. Active learning, good judgment, and time managHydro North America
North Liberty, IN 46554 • (21.3 miles) • Full Time • 10/24/2026
Hydro Extrusions is a world-leading aluminium extrusion business counting around 100 production sites in 40 countries and employing 20,000 people. Through our unique combination of local expertise, global network, and unmatched R&D capabilities, we can offer everything from standards profiles to advanced development and manufacturing for most industries. Since 1905, Hydro has turned natural resources into valuable products for people and businesses with focus on a safe and good workplace for our 30,000 employees in more than 140 locations. What we offer you Medical, RX, Dental, Disability, Life Insurance, Flexible Spending Accounts Retirement Savings Plans with Company Match/Contributions Education Assistance Bonus Plan Eligibility Parental Leave Shifts Available and Hours: 3pm-11pm What yPleasant View Dairy
Highland, IN 46322 • (37 miles) • Full Time • 11/18/2026
Description: Highland, IN Position: Production Worker Job Type: Full-Time Location: Northwest Indiana Job Summary Responsible for performing general warehouse and production duties in a cold storage environment, including cleaning and sanitizing containers, equipment, and work areas, as well as sorting, pulling, and handling dairy products. Follows all safety and hygiene procedures, maintains an organized and clean workspace, and works collaboratively with team members to meet daily operational goals. Requires physical stamina, attention to detail, reliability, and the ability to work independently or as part of a team. Responsibilities: Perform general labor duties as assigned by the Supervisor. Clean and wash containers, equipment, and work areas to maintain a hygienic environment. WorkTramec LLC
Mishawaka, IN 46544 • (33.7 miles) • Full Time • 11/18/2026
Description: Tramec Sloan Penz Products Division, Mishawaka, Indiana is currently seeking a Production Associate in our Plastic Division. WHY YOU’LL LOVE WORKING HERE: Along with competitive pay, we offer a comprehensive benefits package that supports your health, finances, and work-life balance, including: Medical & prescription coverage, including a high-cost specialty drug program (potential for $0 cost) Surgery & imaging program (potential for $0 cost) Dental and vision insurance Company-paid life insurance Company-matched 401(k) Paid vacation and 10 paid holidays (including your birthday) On-demand pay (any day can be payday) $500 employee referral bonus $500 wellness visit drawing Gym membership credit Short- and long-term disability Tuition reimbursement and internal training opportUnited Shade
Elkhart, IN 46514 • (41.4 miles) • Full Time • $18.00 / hr • 11/14/2026
JOB DESCRIPTION Summary/Objective: The Production Associate - Level 1 is an entry-level position responsible for learning and performing basic window covering assembly operations. The associate safely handles aluminum and plastic extrusions, fabric, injection molded components, springs, and related materials; follows standardized work instructions; and produces completed assemblies that meet quality and throughput requirements. Consistent attention to detail, safe work practices, and development of a strong assembly skill base are required for advancement to the next production associate level. Essential Functions: *Learn and demonstrate proficiency in the assigned window shade assembly work area, including the safe handling and assembly of aluminum and plastic extrusions, fabric, injectioAmerican Direct Sales
Valparaiso, IN 46383 • (21.2 miles) • Full Time • 11/14/2026
Tired of food service? Had enough of customer service? Want a better work/life balance, including enjoying your evenings and weekends? WE CAN HELP ! We hire Full-Time, Part-Time & Seasonal! About American Direct Sales American Direct Sales is a digital print-on-demand and order fulfillment company dedicated to quality and customer service. ADS partners with artists & photographers as well as several large well-known brands to print, assemble, pack and ship custom products including personalized wall art, home decor items, blankets, pictures and much more on a variety of substrates including paper, glass, wood, acrylic, canvas, fabric, ceramics, etc. We strive to live out our values of quality, innovation, and compassion for people! We pride ourselves on providing opportunities for those whOpportunity Enterprises, Inc.
Valparaiso, IN 46383 • (21.2 miles) • Full Time • $9.00 / hr • 11/3/2026
JOB SUMMARY The Seasonal Production Associate will provide production and sales support to meet the business demands of Front Row Popcorn while maintaining a positive attitude. DUTIES/RESPONSIBILITIES Each Seasonal Production Associate will be assigned tasks from the following list of responsibilities: Producing Packaging Assembly Labeling Heat Sealing Dishes, sweeping and cleaning up Use of production equipment (Popper, Glazer, Tumbler, Kettle) Drizzling popcorn Cutting fudge Assembling Gift Sets Point of Sale (Cash Register) Stock store Rotate products Attendance Customer service Teamwork Working with urgency Ability to work under pressure Time Management Keep store clean and orderly Keep production area clean and orderly Must abide by agency, state, CARF, OSHA and Health Department reguEvotti LLC
Elkhart, IN 46514 • (41.4 miles) • Full Time • 11/20/2026
Job Title: Fiberglass Repair Technician Reports To: Production Lead Summary: The Fiberglass Repair Technician inspects, repairs, refinishes, and restores fiberglass and gelcoat surfaces used in pontoon boat production. This role identifies defects, performs the appropriate repair process, and delivers work that meets established quality, appearance, safety, and production standards. Responsibilities: Inspect fiberglass and gelcoat surfaces for scratches, chips, cracks, voids, gouges, air pockets, contour issues, and other defects. Prepare repair areas by grinding, sanding, cleaning, masking, and protecting surrounding finished surfaces. Mix and apply gelcoat, resin, catalyst, and other repair materials according to established processes and safety requirements. Perform fiberglass and gelcoSouthlake Automation
Merrillville, IN 46410 • (33 miles) • Full Time • 11/19/2026
Southlake Automation is a fast-growing industrial system integrator serving the automotive, chemical, consumer product, food & beverage, and material handling industries. Our customers make the products you use every day. Come be a part of the exciting world of automation. Hands-on training provided for motivated career orientated applicants Southlake Automation is seeking a full-time Industrial Automation Assembly Technician. This position is an exciting hands-on role in the high-tech automation industry. You will be responsible for assembling and wiring control panels as well as other industrial automation equipment. In addition to control panels, responsibilities include the setup of robotic work cells for machine tending, packing and palletizing. Each system is unique for our customersGaishin Manufacturing Inc
Benton Harbor, MI 49022 • (34.7 miles) • Full Time • $18 to $24 / yr • 11/19/2026
Precision Deburring Technician Location: Benton Harbor, MI Salary: $18 - $24 / Hour (Based on experience) Shift: Either of the following, please indicate your preference when applying A-Shift (Monday – Thursday 6:00 am - 4:30 pm EST // OT As Required) Job Type: Full-time About Gaishin Manufacturing Gaishin Manufacturing is a rapidly growing, family-owned, precision machining company supplying world-class components to Fortune 500 companies in the commercial, aerospace, and medical industries. We are AS9100 and ISO 13485 certified, specializing in complex components with tight tolerances. Our Grand Rapids facility supports precision manufacturing for aerospace and other highly regulated industries, providing employees the opportunity to work on components that help power critical applicatioMay 1 Holdings LLC
Elkhart, IN 46517 • (40.8 miles) • Full Time • 11/18/2026
POSITION SUMMARY 2nd Shift: Monday - Friday 2:30PM - 11:30PM The Production Assembler plays a crucial role in the manufacturing process, contributing to the manufacture of high-quality products. Responsible for executing assembly tasks according to the work instructions, this role requires precision, attention to detail, and adherence to quality standards. The Production Assembler must achieve set production goals, maintain a safe and clean work environment, and leverage Lean manufacturing tools to enhance efficiency. CORE FUNCTIONS Follow established work instructions to properly assemble products and/or different parts of products. Achieve established goals or deadlines set for specific work areas. Complete all required paperwork and/or data entry. May work at different workstations as pActalent
Michigan City, IN 46360 • (4.9 miles) • Full Time • $28.00 to $40.00 / hr • 11/20/2026
Job Title: Mechanical Designer Windshield Wiper Systems Job Description This role focuses on the mechanical design of windshield wiper systems, including both new product development and modifications to existing designs. You will create and update CAD models and drawings using Creo 11, support electrical wire routing layouts when needed, and contribute to engineering analyses such as DFMEA and FEA if you have experience in these areas. The position offers the opportunity to work on complete assemblies and components in a stable manufacturing environment with diverse product lines. Responsibilities Complete mechanical design work for windshield wiper systems, including components and assemblies. Create, modify, and maintain 3D models and detailed drawings using Creo version 11. Support des
Aerotek
Bridgman, MI • (19 miles) • Full Time • 11/12/2026
Job Title: Finishing Technician Job Description Finish Technicians play a crucial role in the final stages of trailer construction before shipment. Starting with the structure received from the paint department, technicians add all necessary parts to complete the trailer, including wiring, hydraulic lines, decals, and axle assembly. No prior experience in electrical wiring or hydraulic line hookup is necessary. Responsibilities Install brake lines and wiring components using a kit assembly list. Screw axles onto the base of the trailer using basic hand and power tools. Place decals and reflectors onto the trailers. Maintain cleanliness of the work station. Work as part of a two-person team to complete finish line tasks. Finish installers will run airlines, rubber hoses, electrical wiring,CRRC Sifang America
Chicago, IL 60633 • (40.6 miles) • Full Time • 11/19/2026
Summary CRRC Sifang America(“CRRC”) is seeking detail-oriented and passionate individuals to join our team as Assistant Quality Engineers("AQE"). In this role, you will be responsible for conducting incoming inspections, assembly process inspections, and/or wiring tests of train components. You will utilize quality forms to track and address quality issues, ensuring compliance with quality standards and specifications, and improving production efficiency and product quality. The Assistant Quality Engineer will work with various groups/departments closely, including but not limited to Production teams, Commissioning and Functional Testing teams, Logistics teams, and Process Engineering teams, as quality is related to every aspect of the business. Essential Duties and Responsibilities: ReasoUrsitti Enterprises LLC
Porter, IN • (16.8 miles) • Full Time • 11/14/2026
Digital Press Operator Location: Northwest Indiana (Portage/Porter Area) Industry: Printing, Branding & Marketing Solutions Position Type: Temp-To-Hire About the Opportunity The Ursitti Group Staffing Solutions is partnering with one of the nation's leading marketing and branding companies to identify a skilled and dependable Digital Press Operator to join their growing production team. This organization specializes in producing high-quality printed materials, custom branding solutions, and visual marketing products for clients across a variety of industries. We are seeking a detail-oriented professional who takes pride in producing exceptional work, thrives in a fast-paced production environment, and understands the importance of quality, accuracy, and meeting customer deadlines. Key RespSMS Group Inc
Gary, IN 46402 • (29.6 miles) • Full Time • 11/11/2026
Are you a CNC Machinist, looking for opportunity? Looking for an Apprenticeship program to advance your skillset? Come Join our Team at SMS group Gary. The CNC Machinist will be responsible for loading/unloading CNC Lathe. Set up of machine including true up of chuck jaws, program required offsets to maintain blueprint specifications, complete appropriate dimensional documentation. The right candidate will: Ability to set up and operate both CNC and manual machinery for use in metal working applications. Experience with G-code and Mazatrol is a plus but not required Complete SOP travelers and document daily activities, advise supervisor of product non-conformance. Interpret assembly and blueprints drawings. Follow proper safety precautions. Must be courteous and work well with others. AbilNexus Employment Solutions
Chicago Heights, IL 60411 • (44.4 miles) • Full Time • $30.00 / hr • 11/11/2026
Nexus Employment Solutions Plus, Inc. is looking to hire directly for a CNC Machinist position in the Chicago Heights, IL area . The CNC Operator is responsible for safely setting up, operating, and monitoring DMG Mori 3-axis CNC machining centers using Siemens 840D / 840D sl controls to produce high-quality machined parts that meet customer specifications and tight dimensional tolerances. This position reads and interprets technical drawings and CNC programs, performs tooling and offset adjustments, conducts quality inspections, troubleshoots basic machining issues, and works independently to maintain efficient production and minimize downtime. Responsibilities include, but are not limited to: Set up, calibrate, and operate DMG Mori 3-axis CNC machining centers according to job orders, prAllied Tube And Conduit Corporation
Merrillville, IN 46410 • (33 miles) • Full Time • 11/8/2026
Manufacturing Engineer Who we are: Atkore is forging a future where our employees, customers, suppliers, shareholders, and communities are building better together – a future focused on serving the customer and powering and protecting the world. With a global network of manufacturing and distribution facilities, Atkore is a leading provider of electrical, safety and infrastructure solutions. Who we are looking for: We are currently looking for a Manufacturing Engineer to be based out of Hobart, IN Reporting to the Sr. Engineering Manager. This person will be responsible for the development & troubleshooting of processes and production lines related to design, material, or process. The ideal candidate will have 3-5 years of relevant experience. Experience in lean manufacturing or a businessEngtal
Hammond, IN 46320 • (37.9 miles) • Full Time • $29.00 to $35.00 / hr • 11/8/2026
Overview We are seeking a skilled and motivated PLC Controls Technician to join our dynamic team in Hammond, IN. In this role, you will play a crucial part in maintaining and optimizing our automated systems, ensuring that our operations run smoothly and efficiently. If you have a passion for technology and a knack for problem-solving, we want to hear from you! Responsibilities Install, troubleshoot, and maintain PLC systems and related equipment. Conduct regular inspections and preventive maintenance on control systems. Diagnose and resolve issues with electrical and control systems. Collaborate with engineering and production teams to improve system performance. Document all maintenance activities and system modifications. Assist in the development and implementation of new automation prValdes Architecture & Engineering
Griffith, IN • (35.8 miles) • Full Time • $145,000 to $185,000 / yr • 11/4/2026
Responsibilities Principal Engineer is responsible for managing project budgets and scheduling of department hours Strong technical skills and an ability to mentor and assist staff in all aspects of electrical design, including I&C specifications and selection Supervise and monitor staff ensuring that engineering packages are completed on time and within budget Ability to analyze, design, and produce engineering packages for clients and prepare instrumentation specifications for purchase Ability to establish and maintain good business relationships with key client contacts throughout the project Extensive knowledge of design codes and the knowledge to establish design criteria and ensure staff is following proper protocol On-site interface with client engineering representative and other dOrbital Engineering, Inc.
Hammond, IN • (37.5 miles) • Full Time • 11/4/2026
Job Title: Mechanical Engineer Location: Hammond, IN; Hybrid FLSA Classification Exempt Job Description: Orbital Engineering is currently seeking an experienced Mechanical Engineer to assist with single and multi-discipline projects in our Hammond, IN Office . The position requires demonstrated engineering and design competence, preferably in a consulting environment and experience in the petrochemical, chemical, and power generation sectors. Responsibilities Include but Are Not Limited To Review client requests for proposals and scopes of work. Act as Orbital representative at bid walkdowns. Prepare manhour estimates and proposals. Evaluate and develop piping specifications and equipment designs for heavy industrial applications (Metals, Midstream Oil & Gas, Refineries & Petrochemical andUES
Valparaiso, IN 46383 • (21.2 miles) • Full Time • $37.91 / hr • 11/1/2026
Description: Union Electric Steel Corporation is seeking a JOURNEYMAN MACHINIST for our Valparaiso, IN manufacturing plant to set up and operate a variety of machine tools to produce precision products. Candidates must be capable of maintaining industrial machines, applying knowledge of mechanics, shop mathematics, layout, and machining procedures as well as provide your Journeyman Machinist card/certificate. Day Shift Position with Overtime as needed. Primary Function: To lay out work, set up and operate machine tools and perform any dismantling, fitting and assembly work required for production, plant maintenance or construction. Also operates all types of equipment on production. Tools and Equipment: All usual types of machines and hand tools common to the trade as well as tool and cuttUrschel Laboratories, Inc.
Chesterton, IN • (16.4 miles) • Full Time • 10/31/2026
Urschel, a 100% employee-owned company, has an opening for a Precision Grinder for our 2nd shift operations working full-time Monday-Thursday and may require working on Friday based on workloads. Urschel employee-owners design and manufacture industrial cutting equipment for food processing and allied industries around the world from our global headquarters located in Chesterton, Indiana, U.S.A. Consumers purchase goods manufactured on Urschel cutting equipment on a daily basis. Advanced manufacturing technologies are utilized at our climate controlled, clean, and environmentally conscious facility. Starting pay is $31.81/hour + 5% Shift Differential Company Benefits, Rewards and Perks: Quarterly performance award bonus based on overall company performance Flex Time Available (must work thAquestive Therapeutics Inc.
Portage, IN 46368 • (22.6 miles) • Full Time • 10/31/2026
Job Summary: The Senior Scientist, CMC Quality, bridges analytical science and product performance, providing scientific leadership to distinguish analytical artifacts from true product, process, or manufacturing risks. This role drives complex investigations, informs quality-critical decisions, and partners cross-functionally to ensure sound, risk-based outcomes throughout the product lifecycle. Responsibilities: Serve as QC’s primary interface to AR&D and Engineering, connecting analytical findings to process variability, formulation behavior, manufacturing deviations. Support PQR/APQR product quality narratives, stability trend interpretation. Lead and provide scientific oversight for complex OOS, OOT, deviation, and product quality investigations, determining whether observations ariseMidwest Refrigeration
Griffith, IN • (35.8 miles) • Full Time • $43.73 to $50.23 / hr • 11/11/2026
The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work. Midwest Refrigeration , a TAG company is seeking Refrigeration Service Technicians for commercial service work in and around the Griffith, IN area Role Summary: The Journeyman Refrigeration Service Technician performs commercial service, maintenance, and repair on refrigeration systems including walk-ins, self-contained units, single systems, and rack systems. This role supportsAM General LLC
Mishawaka, IN 46545 • (32.6 miles) • Full Time • 11/16/2026
INTRODUCTION TO AM GENERAL AM General develops and builds specialized ground vehicle systems that get the US Armed Services and our allies to and from their mission safely. Our innovative spirit delivers advanced, rugged, resilient, and dependable mobility solutions. We are one team dedicated to producing the best products for our customers. We have a collective understanding that at AM General our purpose is to serve those who serve to protect us. We R.I.D.E. with Sgt. Smith! We are R esponsive We have I ntegrity We are D ynamic We exhibit E xcellence PRINCIPLE DUTIES AND RESPONSIBILITIES Lead daily plant operations to meet production targets, quality standards, cost objectives, and delivery schedules Ensure all activities comply with safety policies, environmental regulations, and industPero Family Farms Careers
Benton Harbor, MI 49022 • (34.7 miles) • Full Time • 10/25/2026
Description: Title: Production Manager Reports to : Operations Manager Location : Benton Harbor, MI Type : Full-Time | Onsite | Exempt LOCATION AND COMPANY SUMMARY Nestled along the scenic shores of Lake Michigan, Benton Harbor offers a unique blend of affordability, opportunity, and lakeside living that’s hard to beat. Just minutes from the charming waterfront community of St. Joseph (less than a 20-minute drive), residents enjoy easy access to sandy beaches, boutique shopping, and year-round festivals. The area is also within a short drive of South Haven (about 30 minutes) and under two hours from Chicago, making weekend getaways effortless. With nearby wineries, golf courses, and outdoor recreation, plus a growing local food and arts scene, Benton Harbor delivers a laid-back lifestyle wMaitland Engineering LLC
South Bend, IN 46628 • (22.8 miles) • Full Time • 11/20/2026
Description: With high accuracy perform in-process and / or final inspection of manufactured medical implants and instrumentation in order to detect non-conforming product. Perform inspection setups using the proper tooling and specialized equipment that may or may not be specified on a job setup sheet or job traveler. Examples: comparator setup, Zeiss profilometer setup, Rockwell setup. Maintenance and proper operation of inspection equipment. With high accuracy perform in-process and/or final inspection per customer specifications. Specialize in specific inspection or statistical techniques that may or may not be required by the customer. Perform customer shipment entry. Perform proper handling and packaging of finished product and proper handling of product overages placed into inventorE Tech Group
La Porte, IN • (8.1 miles) • Full Time • 11/20/2026
At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Electrical Technician, Fabricator to fabricate and assemble industrial control panels and small mechanical assemblies. The position requires the ability to perform dFlexible Concepts Incorporated
Elkhart, IN 46516 • (43 miles) • Full Time • 11/19/2026
Description: CNC Machine Operator Who We Are: Flexible Concepts, Inc has produced high-quality precision machined components since 1990 for multiple industries, most notably the automotive and commercial sectors in addition to the U.S. Department of Defense. What began as a small family-owned business remains today as a much larger family-operated organization as an ISO 9001:2015 Certified entity focused on quality, continuous improvement, and flexibility to better serve our customers. Why We are Different: At Flexible Concepts, Inc, we are committed to delivering high-quality parts and services to our customers to grow our business, while caring for our employees as members of our family. What You will Get: 1. A personal, family-oriented culture. 2. Comprehensive benefit offerings includiSterling Engineering Inc.
Niles, MI • (28.5 miles) • Full Time • 11/19/2026
Title : Mechanical Design Engineer Location : Niles, MI Hire Type : Contract to direct hire Compensation : $40-50/hr dependent on experience Benefits : As a contract employee of Sterling, you are eligible to receive a Full Employee Benefits Package that includes paid time off, paid holidays, 3 medical plans to choose from, dental & vision plans, 401(k), and an Employee Stock Ownership (ESOP) plan. Summary: We are seeking an experienced Mechanical Machine Designer to join our engineering team. This individual will be responsible for designing and developing industrial equipment and machinery, supporting projects from initial concepts through detailed design and engineering analysis. The ideal candidate will have a strong background in OEM equipment design, excellent SolidWorks skills, and eOptimal Inc.
Elkhart, IN 46516 • (43 miles) • Full Time • 11/19/2026
Position Summary: Optimal EV is seeking an Electrical Harness Design Engineer based in Elkhart, Indiana to support the design, development, integration, and production launch of vehicle wiring harnesses and electrical systems for electric commercial vehicles. This role will work closely with Engineering, Production, body builders, suppliers, and Controls teams to ensure harness designs are practical, manufacturable, serviceable, and correctly integrated into the vehicle. The position will have a strong hands-on focus and will support vehicle builds directly at the Elkhart production/body integration site. Key Responsibilities: Design and develop vehicle low-voltage wiring harnesses and electrical interfaces. Create and maintain: Wiring diagrams and schematics Harness drawings Connector andWelch Packaging Group
Elkhart, IN 46516 • (43 miles) • Full Time • 11/18/2026
SUMMARY Responsible for helping to create finished products by assisting with machine operation, manual labor, and maintaining production standards. Production Associates will also be responsible for following all safety procedures ESSENTIAL FUNCTIONS Actively engaged to meet daily customer demand and production schedule. Ensure safety standards are maintained at all times. Setup and adjust machine settings to meet product specifications. Troubleshoot problems throughout production run. Checks and assures box quality, including, but not limited to lose liner, warp, correct size, and print. Adhere to production schedule. Reports any unusual scheduling issues to Production Lead. Performs job in a safe, efficient and productive manner, while maximizing the utilization of equipment at availablBull Moose Tube
Elkhart, IN 46514 • (41.4 miles) • Full Time • $20.00 to $33.00 / hr • 11/14/2026
MUST BE ABLE TO WORK ALL 3 SHIFTS. 11pm - 7am 7am - 3pm 3pm - 11pm JOB TITLE: Mill General Helper PAYROLL STATUS: Non-exempt REPORTS TO: Supervisor SUMMARY: Utilize and operate equipment, material and tools in the inspection and production process for slitting. Oversee all slitting functions. Slitting master coils into respective slit coils of various blank widths for use on the mills. Responsible for safe operation of the slitter in capacity as slitter operator and all ancillary activities that support the production of quality slit coils for internal customers (mills 1 and 2). Complies with all safety, quality, customer focus, preventative maintenance and housekeeping standards. All other duties as assigned and expected. WORK ENVIRONMENT: While performing the duties of this job, the areaEngineering Economics, Inc.
South Bend, IN • (26.3 miles) • Full Time • $42.26 to $60.22 / hr • 11/13/2026
Mechanical Specialist Openings: Multiple About the Position: At EEI, we believe in doing things the right way, with excellence, integrity, and genuine care for our people. As an employee-owned company, our People First culture is rooted in trust, accountability, and shared success. As a Mechanical Specialist for EEI’s Mission Critical team, you will independently perform commissioning, testing, troubleshooting, and verification of mechanical systems that support data centers and other high-reliability facilities. You will work alongside experienced technical professionals and project stakeholders to help ensure critical facility systems operate safely, efficiently, and reliably. In this role, you will take ownership of assigned field activities, support functional performance testing, coorLECO Corporation
Saint Joseph, MI 49085 • (28.3 miles) • Full Time • 11/13/2026
Electronics Technician I For over 90 years, LECO has been a leader in the development and production of world class laboratory instruments delivering state of the art products nationwide and across the globe. Located in St. Joseph, Michigan, LECO continues to be a family-owned company that understands the value of shared interests, long-term stability, loyalty, and trust. Schedule: Full Time: 6:00am to 2:30pm, Monday through Friday and overtime as needed Position Summary: The Electronics Technician I will troubleshoot, test, repair, and operate LECO products. Position Responsibilities: Responsible for setting up, troubleshooting, repairing, testing, and operating LECO products and test equipment under the direction of a higher-level technician, supervisor, or manager LECO products and testSolve IMG
LaPorte, IN 46350 • (8 miles) • Full Time • 11/12/2026
Solve Industrial Motion Group strives to be the trusted source for engineered bearings and power transmission solutions. Supported by a diverse range of products within Solve’s brand portfolio and our unmatched technical expertise, we have over 100,000 ready-to-ship components. At Solve we innovate with ambition, offering custom solutions in a wide range of applications. We obsess over our customers, leveraging our nationwide network for industry leading product availability, and best-in-class customer service. Our engaged team leads with integrity, and unites with purpose, driving toward innovation and continuous improvement every day. POSITION DESCRIPTION: Reporting to the Production Manager, the CNC Programmer is responsible for the programming, set-up, operation and troubleshooting ofHydro North America
Elkhart, IN 46514 • (41.4 miles) • Full Time • 11/12/2026
Hydro Extrusions is a world-leading aluminium extrusion business counting around 100 production sites in 40 countries and employing 20,000 people. Through our unique combination of local expertise, global network, and unmatched R&D capabilities, we can offer everything from standards profiles to advanced development and manufacturing for most industries. Since 1905, Hydro has turned natural resources into valuable products for people and businesses with focus on a safe and good workplace for our 30,000 employees in more than 140 locations. What we offer you Medical, Rx, Dental, Disability, Life Insurance, Flexible Spending Accounts Retirement Savings Plans with Company Match/Contributions Education Assistance Bonus Plan Eligibility Parental Leave Hourly rate: $32/hr - $40/hr +$2/hr for nigCHT USA
Cassopolis, MI 49031 • (42.6 miles) • Full Time • $25.00 to $31.00 / hr • 11/12/2026
+ 4% Shift Premium! At CHT USA, we foster a supportive workplace with competitive benefits, including medical, vision, dental, and life insurance starting on day 31. Our 401(k) plan allows participation in the first of the month after three months of employment, with a 3% company-paid contribution and full vesting from eligibility. We offer opportunities for growth, and we’d love to hear from you! Are you ready to take your career to the next level? We're looking for a dedicated 2nd Shift Chemical Operator (GMP) to join our team! In this role, you'll operate equipment and semi-automatic systems to transform chemicals into high-quality products. Key Responsibilities: Build production batches and complete batch documentation in compliance with cGMP and GDP standards Load/unload chemicals, opNippon Paint Automotive Americas
Lansing, IL 60438 • (41.2 miles) • Full Time • $22.82 to $34.76 / hr • 11/12/2026
At NPAA, we believe our employees are our greatest strength. We are proud to offer a generous and competitive rewards package, including: Earned Bonus Structure – attendance bonuses, annual merit increases, and an annual incentive bonus plan. Time Off & Holidays – 11 paid holidays each year, plus paid time off to support work-life balance. Health & Retirement – comprehensive health and welfare plans, along with a 401(k)program featuring an exceptional company match. Career Growth & Recognition – tuition reimbursement, employee recognition programs, and opportunities to grow within the organization. Culture & Community – as part of the NPAA family, you’ll enjoy company events throughout the year celebrating and appreciating our employees’ hard work and dedication. POSITION SUMMARY: The ResiJVIS
Benton Harbor, MI 49022 • (34.7 miles) • Full Time • 11/11/2026
SUMMARY: The Process Technician primary responsibilities include monitoring and optimizing production processes throughout our facility and to develop and implement documentation, procedures and policies within our operating systems while maintaining IATF, ISO 14001 and while meeting customer specifications. Reports functionally to Molding Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following Start up equipment and shut down equipment before and after designated company shut down periods. Complete first piece sign-off procedure reviewing current concerns and operator quality concerns. Verify that the setup and material match BOM and the correct amount of regrind is being used. Respond to problems identified by both operators and Plantstar calls. Communicate with oncoming shiDwyerOmega
Michigan City, IN 46360 • (4.9 miles) • Full Time • $22.00 to $30.00 / hr • 11/7/2026
Description: Session: Summer 2027 Location: Michigan City, IN (On-Site) Duration: May-August 2027 (Full-Time) About the Company DwyerOmega is a globally trusted leader in manufacturing innovative instrumentation solutions for the Process Measurement, Automation, Control and HVAC markets. With very strong brand recognition and high levels of customer loyalty, DwyerOmega has an unmatched reputation for providing customized solutions that meet and exceed customer needs. Our team of engineering experts help our customers select technical, and often configured, product solutions for their unique applications. What You’ll Do We are seeking a motivated and detail-oriented Electrical Engineering Intern to join our team. This internship offers a unique opportunity for college students to gain handsNCW
Elkhart, IN • (42.1 miles) • Full Time • 11/7/2026
Position Summary: We are seeking a skilled Set-Up/Process Technician to support production operations in a plastic injection molding environment. This hands-on role is responsible for setting up and maintaining injection molding machines, robots, dryers, grinders, and related equipment to ensure safe, efficient, and high-quality production. The ideal candidate will perform mold and tool changeovers, prepare raw materials, troubleshoot machines and part issues, respond to equipment alarms, complete preventive maintenance tasks, and maintain a clean, organized work area. Responsibilities: Installing the correct molds/inserts into the correct machines Prepping and mixing raw materials for production Cleaning dryers, grinders, machine hoppers. Cleaning machine off; put all tools away after chaAirxcel Inc
Cassopolis, MI 49031 • (42.6 miles) • Full Time • 11/4/2026
Aluminum Extrusion Press Operator Position Summary We are seeking a reliable and safety-conscious Aluminum Extrusion Press Operator to join our manufacturing team. The Press Operator will be responsible for setting up, operating, and maintaining aluminum extrusion press machines to produce high-quality parts in accordance with company standards, production goals, and customer specifications. This position requires strong attention to detail, mechanical aptitude, and a commitment to workplace safety and efficiency. Key Responsibilities Machine Operation Set up and operate extrusion press equipment to produce aluminum parts according to specifications. Adjust machine settings, tooling, and dies to maintain product quality and consistency. Monitor production processes and troubleshoot equipmeCTE Solutions
Plymouth, IN 46563 • (34.1 miles) • Full Time • $27.00 to $35.00 / hr • 11/3/2026
Build More Than a Job-Build a Career at SpiTrex CTE At SpiTrex CTE, we invest in our people. You’ll find opportunities to grow, real flexibility, and a culture that values balance, development, and teamwork. Sign-on bonus incentive: $375 at 30 days; $375 at 90 days Why join CTE? Career Growth: Ongoing training and development through Bamboo Path Track & WorkForge Flexibility: Flextime options that support real life Culture: Team events, Donut Fridays, food trucks, and more Rewards: Referral bonuses, quarterly bonuses, and a 401(k) with 50% company match (up to 10%) Benefits: No-cost vision, life, and short-term disability; dental & medical with HSA or PPO options Ready to grow with a company that values you? Join SpiTrex CTE. 2nd Shift: Monday to Thursday, 3PM - 1AM This position in will nBlackRock Resources LLC
New Carlisle, IN • (14.8 miles) • Full Time • 10/30/2026
Technical Electrical Engineer Overview We have an exciting opportunity to join our clients Operations Team working on Data Center, Vehicle Manufacturing, or General Build Construction projects. The role will include planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive construction projects. Technical support includes participation in construction planning and design, interpretation of design, application of construction methods, resolution and documentation of design conflicts, constructability reviews, and shop drawing processing. You'll also get to develop, implement, and administer project engineering procedures and other work controlling documents in the Prolog database, material status reports, process requests for informatioCrossFire Group
Mishawaka, IN • (31.6 miles) • Full Time • 10/30/2026
Senior Material Planner $28-31/hr Principal Duties and Responsibilities Research and track your deck of materials for shortage(s) activity and communicate shortages to all people/depts involved Review future production forecast and check materials ordered correctly Contact vendors daily via email and phone for timely shipments Discuss past dues, upcoming material constraints, shipping and receiving details, Supplier Process Changes (SPC) and all Supplier Resource (SRC) activities Issue weekly releases VSR (Vendor Schedule Release), and address MRP exceptions to ensure no production interruptions Assist in inventory control with inventory requests and resolving receiving discrepancies (missing ASN, paperwork and receipts) Assist accounts payable with any receiving and or invoicing concernsMidwest Aerospace Casting, LLC
Crown Point, IN 46307 • (35.7 miles) • Full Time • $20.00 to $25.00 / hr • 10/28/2026
Description: Our company is seeking a Casting Tool and Grinder Operator to join our team. The successful candidate will be responsible for properly and safely cleaning castings using grinders and blending tools to remove and blend parting lines, chill marks, ingates, and other imperfections. The operator will utilize work instructions, bench castings, and route and product information sheets to produce castings that meet customer requirements. If you are a reliable and detail-oriented individual with experience in casting grinding and blending, we encourage you to apply for this exciting opportunity. Midwest Aerospace Casting offers competitive compensation and benefits packages, as well as opportunities for growth and advancement within the company. We are committed to creating a diverseUnited Petfood Producers USA Inc.
Mishawaka, IN 46544 • (33.7 miles) • Full Time • $23.00 / hr • 10/27/2026
Job Title: Extruder Operator Location: Mishawaka, IN Department: Production Job Type: Hourly Work Schedule : Sunday–Wednesday or Wednesday-Saturday Hours: 6:00 AM – 6:00 PM or 6:00 PM – 6:00 AM (12-hour shifts), Wednesday 1/2 shifts Pay : $23 per hour / Night shift $1.00 shift differential, Weekend shift $1.50 shift Diff. About United Petfood United Petfood is a private label producer of high-quality dry & wet pet food, biscuits, and snacks. We are a Belgian family business with 25 high-tech pet kitchens in Europe and the US. Joining us means being part of an international, passionate, and driven team with one common goal: a healthy planet filled with healthy pets! We value long-lasting partnerships, innovation, and providing an environment where our people can grow and thrive. Learn more:Hanson International, Inc.
Saint Joseph, MI 49085 • (28.3 miles) • Full Time • 10/24/2026
Lead Mold Maker Hanson International, located in St. Joseph, Michigan, specializes in the design, build, sample, and inspection of precision molds – primarily for the die cast industry. Hanson International is currently seeking a qualified candidate to fill a night shift lead mold maker position. DUTIES AND RESPONSIBILITIES: Project management. Machining of die components in a CNC machine tool (Milltronics preferred). Fitting die components to cavity and holder blocks Die spotting and bluing. Assembly and disassembly of dies. Plumbing of cooling circuits. Understand all machining processes used in mold/die manufacturing. EXPERIENCE: 5 years in building die cast dies. Journeyman mold maker certificate. CANDIDATE REQUIREMENTS: High School diploma. Active learning, good judgment, and time manCONN-SELMER INC
Elkhart, IN 46516 • (43 miles) • Full Time • 10/24/2026
Description: At Conn Selmer, we're passionate about music and dedicated to producing the highest-quality instruments for musicians of all skill levels. As a member of our organization, we seek candidates who possess the following values: Integrity, Excellence, Teamwork, Inclusivity, and Innovation. Please see our Conn Selmer website ( for more information about who we are. The Process Engineer will support the reduction of manufacturing cost while increasing productivity using developed manufacturing skills under the direction of the Engineering Manager. Implement and control optimized manufacturing processes to ensure consistent productivity. Responsibilities Determine operations required to procedure products and develop processes to ensure quality, cost and efficiency requirements are mContractor Company
Mishawaka, IN 46545 • (32.6 miles) • Full Time • 11/11/2026
INTRODUCTION TO AM GENERAL AM General develops and builds specialized ground vehicle systems that get the US Armed Services and our allies to and from their mission safely. Our innovative spirit delivers advanced, rugged, resilient, and dependable mobility solutions. We are one team dedicated to producing the best products for our customers. We have a collective understanding that at AM General our purpose is to serve those who serve to protect us. We R.I.D.E. with Sgt. Smith! We are R esponsive We have I ntegrity We are D ynamic We exhibit E xcellence PRINCIPLE DUTIES AND RESPONSIBILITIES Provide a safe working environment for employees by keeping department clean and organized Identifies problems related to production process and provides production reports to assist process improvementAmerican Direct Sales
Valparaiso, IN 46383 • (21.2 miles) • Full Time • 11/12/2026
Tired of food service? Had enough of customer service? Want a better work/life balance, including enjoying your evenings and weekends? WE CAN HELP ! We hire Full-Time, Part-Time & Seasonal! About American Direct Sales American Direct Sales is a digital print-on-demand and order fulfillment company dedicated to quality and customer service. ADS partners with artists & photographers as well as several large well-known brands to print, assemble, pack and ship custom products including personalized wall art, home decor items, blankets, pictures and much more on a variety of substrates including paper, glass, wood, acrylic, canvas, fabric, ceramics, etc. We strive to live out our values of quality, innovation, and compassion for people! We pride ourselves on providing opportunities for those whCavco Manufacturing LLC
Nappanee, IN 46550 • (44.2 miles) • Full Time • 11/20/2026
Job Summary: The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finishNRP Jones LLC
LaPorte, IN 46350 • (8 miles) • Full Time • 11/20/2026
Description: Position Overview: This position ensures proper fittings and attachment to hose in line with industry standards and regulations. The ideal candidate will have strong technical skills and a commitment to safety and quality. Essential Job Functions: Performs bench-type processes to complete mechanical and electrical assemblies and subassemblies, using hand tools and electronic and pneumatic tooling. Reports defective materials or questionable conditions to the department supervisor. Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. Performs prescribed preventive maintenance on machines as required. Completes tasks as directed by manufacturing schedules with minimum supervision. Hydrostatically testing hose to proofEvotti LLC
Elkhart, IN 46514 • (41.4 miles) • Full Time • 11/18/2026
Job Title: Boat Assembly Technician Reports To: Assembly Manager Summary: The Boat Assembly Technician plays a key role in the production of high-end pontoon boats by assembling, installing, and inspecting a wide range of components including electrical, mechanical, and structural systems. This position requires strong attention to detail, technical aptitude, and the ability to work efficiently and safely within a fast-paced, team-oriented manufacturing environment. The ideal candidate is flexible, dependable, and takes pride in producing high-quality craftsmanship that meets Evotti’s standards for performance and appearance. Responsibilities: Assemble, install, and inspect boat components such as electrical systems, furniture, hardware, and mechanical parts according to job travelers andMay 1 Holdings LLC
Elkhart, IN 46514 • (41.4 miles) • Full Time • 11/18/2026
POSITION SUMMARY The Production Assembler plays a crucial role in the manufacturing process, contributing to the manufacture of high-quality products. Responsible for executing assembly tasks according to the work instructions, this role requires precision, attention to detail, and adherence to quality standards. The Production Assembler must achieve set production goals, maintain a safe and clean work environment, and leverage Lean manufacturing tools to enhance efficiency. Shift: Monday - Thursday (+ weekends as needed): 5:00am-3:30pm CORE FUNCTIONS Follow established work instructions to properly assemble products and/or different parts of products. Achieve established goals or deadlines set for specific work areas. Complete all required paperwork and/or data entry. May work at differen