Fort Wright, KY 41017-9655 • (25.3 miles) • Full Time • 10/1/2026

Sanitation District No. 1Director of Capital Improvement ProjectsDepartment:EngineeringReports To:Senior DirectorFLSA Status:Exempt / grade 28Prepared Date:3/17/2026SummaryThis position will be responsible for directing and managing the Capital Improvement Projects Department. This department includes overseeing the planning, design, and construction of capital projects for wastewater and storm water capital improvement projects. Specific duties include, but are not limited to, the following:Essential Duties and Responsibilitiesinclude the following. Other duties may be assigned.· Oversees the planning, design, and construction of projects within a large capital improvement program. Projects have varying levels of complexity generally include sanitary and storm sewer rehabilitation and rep

Newport, KY 41071 • (27.7 miles) • Full Time • 10/1/2026

Position: Electrical Engineer IIILocation Schaumburg, IL / Albuquerque, NM / Avon, CO / Hunt Valley, MD / Belleville, IL / Boise, ID / Chicago, IL / Corona, CA / Dallas, TX / Davenport, IA / Lakewood, CO / Evansville, IN / Ft. Collins, CO / Ft. Myers, FL / Irvine, CA / Milwaukee, WI / Newport, KY / Northwest Arkansas / Orlando, FL / Overland Park, KS / Palm Springs, CA / Phoenix, AZ / Riverside, CA / San Diego, CA / Seattle, WA / Springfield, MO / St. Louis, MOYears of Experience: 5+ YearsAbout RTM:RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensiv

Florence, KY 41042 • (21 miles) • Full Time • 10/1/2026

We have an opening for full time BUILDING ENGINEER - LIQUID COOLING positions.Location: 4805 Aero Parkway, Florence, KY 41042. Note: online applications accepted only.Schedule: Full-time schedules available. Multiple shifts offered (day, night, and overnight/grave); additional details will be discussed during the interview.Requirement: Preferred experience supporting liquid cooling, HVAC, or fluid-based systems (piping, pumps, heat exchange) in data center, industrial, or other high-reliability environments.Pay Range: $35.00 per hour to $41.00 per hour Shift differential applies: Day shift ($35.00/hr), Night shift ($37.00/hr), Overnight/Grave shift ($41.00/hr)ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the Internationa

Cincinnati, OH • (32 miles) • Full Time • 10/1/2026

Job Opportunity: Sales Engineer with Environmental Air Products in Cincinnati, Ohio(Mechanical Engineering / HVAC)Are you a Mechanical Engineer who enjoys building relationships as much as solving technical challenges?Environmental Air Products (EAP) is seeking a Sales Engineer to join our team in Cincinnati. This unique opportunity combines engineering expertise, customer relationships, and technical consulting within the commercial and industrial HVAC industry. As a leading manufacturer's representative, EAP partners with consulting engineers, contractors, and manufacturers to deliver innovative HVAC solutions throughout the Cincinnati and Dayton markets.For more than 50 years, EAP has represented industry-leading HVAC manufacturers and built a reputation as one of the most respected man

Cincinnati, OH • (32 miles) • Full Time • 10/1/2026

Job Opportunity: Field Service Controls Engineer with Fameccanica North America in West Chester, OHReady to launch your career in automation, controls, and robotics?Fameccanica North America is seeking an entry-level Field Service Controls Engineer to join its growing team. This is an onsite, hands-on role focused on testing, validating, troubleshooting, and supporting automated manufacturing equipment.In the beginning, this role will focus heavily on equipment testing and validation in Fameccanica's West Chester facility. The work will be repetitive by design and will involve following test procedures, troubleshooting issues, documenting results, and helping ensure equipment is ready before shipment. As skills develop, this role may grow into customer-site support, installation, commissio

Cincinnati, OH 45209 • (33.8 miles) • Full Time • 9/30/2026

About StratusStratus® is an integrated, multi-disciplinary engineering, architecture, interior design, and consulting firm. Consistently ranking among the Top 500 Design Firms in Engineering News-Record, the firm offers a deep bench of industry experts through a highly collaborative approach, delivering innovative solutions across the full project lifecycle. Operating coast to coast, Stratus® serves clients nationwide while maintaining a strategic commitment to supporting high-growth economies and building vibrant communities that foster the professional growth of its team. Serving public- and private-sector clients, the firm is dedicated to delivering the highest-quality service wherever projects take shape. Across the Civic, Commercial, Industrial, Transportation, Education, Water Resour

Cincinnati, OH • (32 miles) • Full Time • 9/29/2026

Sales EngineerQualified candidate will assist engineering group with account support.Candidate will be educated on the company’s manufacturer’s products and software.Candidate will manage several engineering accounts in an outside sales capacity.Position requires a dynamic and flexible personality. Responsibilities include making product selections, customer support, and customer entertainment.Candidate will make presentations to engineering customers to educate them on the company’s manufacturer’s products and updates to our offering. Presentations may be virtual or in person, with support from manufacturers. Product updates include assisting in developing marketing material to educate customers via email, website updates, constant contact, etc.Attention to detail must be outstanding. Loc

Cincinnati, OH • (32 miles) • Full Time • 9/29/2026

Electrical Project EngineerCincinnati, OH$70,000 - $130,000 (DOE)28958Our client is currently searching for an experienced Electrical Engineer to join their team. They have been in business for over 70 years and have experienced tremendous success as an organization decade after decade. Their average employee tenure is 15 years and they offer the utmost in job stability. They offer generous compensation packages that include a lucrative base salary, bonuses that pay up to 20% of base, full benefits, matching 401(k), and relocation assistance (if needed).Why Apply:Average employee tenure is 15 yearsGreat facility location near downtown CincinnatiTremendous compensation packageThe current opening is for an Electrical Project Engineer. Main duties include:Lead electrical engineering and desig

Newport, KY 41076 • (24.6 miles) • Full Time • 9/26/2026

Job Title: CAD DesignerJob DescriptionThe CAD Designer is responsible for creating precise 3D models, layouts, and detailed drawings of plant systems and heavy processing equipment. This role works closely with the corporate engineering team and a group of full-time CAD designers to support ongoing projects, develop accurate equipment details, and produce comprehensive plant layouts. The position requires a self-starter who can make preliminary design decisions with minimal supervision while maintaining high standards of accuracy and timeliness.ResponsibilitiesCreate detailed 3D models and drawings of rendering plant equipment such as screw conveyors, hoppers, and related components, as well as larger plant facility layouts.Work independently to support the engineering team by making infor

Cincinnati, OH • (32 miles) • Full Time • 9/26/2026

Contract to DirectWe are seeking a Mechanical Design Engineer to join our Engineering Department. This role is ideal for someone who enjoys both designing mechanical systems and seeing those designs come to life on the factory floor. You will work closely with engineering, sales, and manufacturing teams to develop and improve equipment and ensure designs meet customer and production requirements.What You'll DoCreate and modify 3D mechanical designs using Autodesk Inventor.Develop 2D drawings and installation, assembly, manufacturing, and detail drawings using AutoCAD and 3D CAD software.Prepare installation and illustration drawings for customer projects.Revise and update drawings based on design changes and production requirements.Collaborate with sales, engineering, and manufacturing to

Cincinnati, OH • (32 miles) • Full Time • 9/25/2026

Job Description:As an MRO Quality Engineer, you will review engine components and repair procedures for part repair and overhaul. Reporting to the QC Supervisor, the successful candidate will have the following experience and abilities:Inspection of engine components.Review/Approve written and illustrated repair plans, bills of material and outside purchase specifications per engineering drawings/specifications.Provide training and support for QC Inspectors.Participate in quality/engineering review of discrepant parts including Cause and Corrective Action.Coordinate new and current business requirements with Production, Contracts and Engineering.Support Production in delivery of products to customers on schedule.Qualifications/Requirements:To be considered for this position, you must meet

Georgetown, KY 40324 • (30.2 miles) • Full Time • 9/25/2026

We are hiring Electrical Engineer for a Contract position in Georgetown, KY CALL US NOW for immediate consideration! Click Apply on Web or Apply Now to view our recruiter s contact info and reach out today, we d love to speak with you! ======================================================= • • We will NOT accept 3rd Party (C2C) Contractors * • ======================================================= JOB DETAILS: Position:Electrical Engineer JOB REF#:45048 - 1514704 Duration:12 Months (On-going Contract) Location:ONSITE - Georgetown, KY 40324 Pay Rate:$60.00 - $65.00 per hour (W2 Only) • • Must be LOCAL or willing to RELOCATE at your own expense • • • • This is role is 100% ONSITE, no remote work offered • • RESPONSIBILITIES INCLUDE: • Investigate project feasibility, scope, schedule and bu

Cincinnati, OH • (32 miles) • Full Time • 9/25/2026

A small precision machine shop is hiring one CNC Machinist who can set up and program lathes and mills.Most of the work here is round, turned parts, so lathe experience matters most. Mill work runs on a CNC machining center and is mostly drilling and tapping. This is a job shop: the parts change often, and it is not long-run production.What you will do:- Set up CNC lathes and a CNC machining center- Write and edit programs at the machine- Drill and tap on the machining centerWhat you need:- Hands-on lathe setup experience, CNC or manual (a strong manual lathe machinist can be trained onto CNC)- CNC programming or program editing at the control- Job shop or high-mix experience- Mill or machining center setup is a plusPay: $20 to $35 per hour, based on experience. Full time, permanent.Apply

Stamping Ground, KY 40379 • (26.4 miles) • Full Time • 9/24/2026

Move Forward with VoltVolt is immediately hiring for Manufacturing Engineer in Georgetown, KY.Global OrganizationMarket LeaderFast GrowingAs a Manufacturing Engineer you will:Job Description Support manufacturing, production, equipment, process, controls, facility, and new model launch activities within a world-class automotive manufacturing environment. Work cross-functionally to improve safety, quality, productivity, and cost while supporting production operations, equipment implementation, process improvements, and engineering initiatives.Day to Day ResponsibilitiesSupport production and manufacturing operationsDrive process improvements and problem-solving activitiesSupport equipment installation, startup, and commissioningCollaborate with production, maintenance, quality, and engineer

Cincinnati, OH • (32 miles) • Full Time • 9/24/2026

Our client is seeking a Lead Structural Engineer to lead industrial facility projects supporting manufacturing operations, capital improvements, and facility expansions. This position is based in Green Bay, WI or Cincinnati, OH. Remote consideration may be available for qualified U.S.-based candidates who can travel as needed to support client projects, field work, and team collaboration.Job Type: Direct HireLocation: Green Bay, WI or Cincinnati, OH (Remote Considered)Salary: $120,000 - $150,000 per year, negotiable based on experience, technical expertise, industry background, and overall qualifications.Required: Active Professional Engineer (PE) LicenseKey ResponsibilitiesLead structural engineering projects from concept through construction.Design industrial structures including platfor

Cincinnati, OH 45249 • (43.5 miles) • Full Time • 9/23/2026

Job Title: Design HVAC EngineerLocation: Cincinnati, OH Department: Engineering Reports To: Director of Engineering Employment Type: Full-TimeAbout ECU CorporationECU Corporation is a leading innovator in environmental control systems, specializing in high-performance HVAC solutions for industrial and mission-critical applications. With a commitment to sustainability, precision engineering, and customer satisfaction, we deliver cutting-edge climate control technologies that power the future.Job SummaryWe are seeking a highly motivated and detail-oriented Design HVAC Engineer to join our dynamic engineering team. This role is responsible for designing, developing, and optimizing HVAC systems and components that meet performance, efficiency, and regulatory standards. The ideal candidate will

Cincinnati, OH 45240 • (41.7 miles) • Full Time • 9/22/2026

SUMMARY OF POSITIONThe Sr. Quality Engineer will be primarily focused on supporting new product development as well as supporting general sustaining activities while maintaining the effectiveness of the overall QMS, at our Cincinnati, OH facility. This position will support activities related to Vapotherm’s complete product portfolio with focus on both hardware and disposable products.PRIMARY RESPONSIBILITIESQuality representative on new product development projects assisting in product design control activities.Act as risk management SME and create, with cross-functional input, various risk management documents including Hazard Analysis, FMEA, FTA and Risk Management Report.Provide Quality review and approval for market needs, product requirements and specifications/technical drawings.Res

Georgetown, KY 40324 • (30.2 miles) • Full Time • 9/18/2026

We are currently searching for a detail-oriented CAD Designer to join our team!The CAD Designer will be responsible for creating, modifying, and maintaining detailed designs, drawings, and models for product, tooling, fixtures, and equipment. This role will have a schedule of Monday-Friday, 8:00am to 5:00pm with occasional Saturdays depending on operational needs.Please note: This role is open to local candidates only or candidates that are already in the process of moving to the area as there is no sponsorship or relocation package offered.ResponsibilitiesCreate detailed 2D drawings and 3D CAD models for components, product, tooling, fixtures, and equipmentWork closely with Mechanical Engineer to convert design concepts into detailed drawingsCollaborate with Mechanical Engineer, Process E

Cincinnati, OH • (32 miles) • Full Time • 9/16/2026

Well established automotive supplier, has an opening for a Quality Engineer.Prepare and update PPAPsPrepare and update Process Control Plans, FMEA’s and Process Inspection InstructionsSPC monitoring and Capability (CPK, PPK) improvementsChampion Problem resolution and Corrective Action activitiesCustomer InteractionsAttend feasibility meetings/new launchesApproves rework and provides deviations for non-compliant materialExcellent benefits!Monthly bonuses after 90 days.\nCompany DescriptionWorld Leader in Precision Metal Forming; Global company. Primarily serving the automotive industry. Excellent work environment and benefits. Team oriented. Bonus program. Friendly atmosphere.Company DescriptionWorld Leader in Precision Metal Forming; Global company. Primarily serving the automotive indust

Cincinnati, OH • (32 miles) • Full Time • 9/16/2026

Position SummaryRSI is recruiting an Operations Engineer who will be responsible for the technical operation, maintenance, and optimization of wastewater treatment facilities and infrastructure to ensure regulatory compliance and operational efficiency. This role applies mechanical engineering principles to ensure the reliability of site operations and treatment systems through hands-on field assessment, troubleshooting, and project support.Job Title: Wastewater Treatment Systems EngineerLocation(s): Fernald, OHStatus: Full-TimeFLSA: ExemptHiring Range: $65,000.00 - $75,000.00 per year.(The anticipated starting salary is based on the posted minimum requirements for this position. The offered salary will be based upon the selected applicant’s education, training, and experience.)The positio

Hebron, KY • (26.8 miles) • Full Time • 9/15/2026

Do you enjoy solving complex problems, programming from scratch, and seeing your work come to life?At HAHN Automation Group, our Software Controls Engineers do more than maintain or make repetitive changes to the same production line. You build the controls software that brings custom automated manufacturing equipment to life. Every project presents a new engineering challenge, giving you the opportunity to design, program, troubleshoot, and commission systems rather than simply keep an existing process running.You’ll develop and install software for custom automation using a variety of technologies, including PLCs, HMIs, robot controllers, motion controllers, machine vision, LabVIEW, and other automation platforms. You’ll work closely with mechanical and electrical engineers as well as cu

Lexington, KY • (45 miles) • Full Time • 9/15/2026

Job DescriptionSr. Electrical Design Engineer, you will work closely with architectural, mechanical and structural department colleagues on a variety of projects.RequirementsEDUCATION/ PROFESSIONAL CREDENTIALSBachelor of Science in Electrical Engineering from an ABET Accredited ProgramProfessional Engineer Registration in at least one StateAbility to seek PE comity/ reciprocity with other State Registration BoardsQUALIFICATIONSExperience mentoring junior team membersMinimum 15 years of experience designing and providing construction administration for facilities as a design consultant (more experience is desirable)Knowledge of Military, Justice, Commercial, or water treatment desirableBasic knowledge of building, electrical, fire codes and standards to determine engineering calculations, e

Cincinnati, OH • (32 miles) • Full Time • 9/14/2026

We use MasterCam CAD/CAM X24 software to do mold designs and then write programs for the CNC machines. We have 3 HURCO, 4 FADAL,3 Milltronics 3 axis, You can see the types of molds and our cnc equipment on our website www.borkemold.comYour job will require mold design, programming, setup in the CNC, run the CNC; maintaining quality\nCompany DescriptionCompany Description:We have been in business since 1990 and are one of the premium mold makers for the plastic industry.We make molds for plastic industry, mainly the vacuum forming industry thin and thick gauge. We work with epoxy boards, woods and aluminum materials. We are not a production shop. Every mold is unique and permanent. Also make molds for rotational and blow molding industries. WWW.BORKEMOLD.COMCompany DescriptionCompany Descri

Georgetown, KY 40324 • (30.2 miles) • Full Time • 9/13/2026

Job Description and Responsibilities: This position is for a Mechanical Design Engineer in the AGC/AGV Department of Creform. Creform specializes with providing customers with turn-key solutions for automation of material movement across a warehouse or factory. The engineer in this position would concept, design, develop instructions for build and installation for mechanical designs that are custom to our ever-changing customer base. The applicant would report directly to the Engineering Manager of the department.Education· Bachelor Degree in Mechanical Engineering or equivalent training/education.Job Tasks· Meet with customers to develop and refine solutions on specific needs and problems· 3D modeling design and create fabrication/build packages for assembly· Ensure production of assembli

Loveland, OH 45140 • (43.9 miles) • Full Time • 9/13/2026

JOB PURPOSEThe Sr. Project Engineer (ME) performs design and analysis work that involves conventional engineering practice, which requires independently evaluating, selecting, and modifying standard techniques, procedures, and criteria. The Sr. Project Engineer (ME) possesses a broad engineering knowledge thorough experience in all areas of design. This position also acts as a technical mentor to other engineers, interacts with clients on a consultative basis, and may generate additional client business.DUTIES & RESPONSIBILITIESPlans & performs engineering duties as assigned.Uses 3D CAD software to create preliminary and detailed drawings of the product.Becomes proficient in necessary software packages to support a variety of client work.Builds models and prototypes of the product tests th

Cincinnati, OH • (32 miles) • Full Time • 9/6/2026

Job Title: Fluid Dynamics EngineerPosition OverviewWe are seeking a competent Mechanical Engineer to join our engineering team. This role plays a critical part in the design, analysis, and optimization of airflow measurement systems, test stands, and related mechanical/thermal subsystems. The ideal candidate has a strong foundation in fluid mechanics, thermodynamics, compressible flow, and instrumentation, and can translate theoretical principles into practical solutions for high-accuracy airflow equipment.The Engineer will collaborate with other team membersincluding electronics, software, and manufacturingto ensure our products meet stringent performance, accuracy, and reliability requirements. This position requires strong analytical ability, hands-on testing skills, and the ability to

Cincinnati, OH 45202 • (29.8 miles) • Full Time • 9/5/2026

POSITION SPECIFICATIONPosition:Electrical Engineer IIIDepartment:Manufacturing (MFG)Reporting Relationship:Senior Project Manager, MFG COMPANY BACKGROUNDKFI Engineers is a recognized industry leader in facility infrastructure design and performance. Since 1996, our culture of collaboration and unique capabilities have allowed us to make a difference in the way infrastructure and processing projects are delivered.Headquartered in St. Paul, MN, with numerous regional offices throughout the United States, and a team of hundreds of professionals, we offer opportunities to continue your career with mentorship programs, career growth support, and continued education. With KFI, we find a way to provide creative solutions to unique projects while providing the same care we would expect if we were

Cincinnati, OH • (32 miles) • Full Time • 9/3/2026

OverviewWe are seeking a skilled CNC Programmer to join our small business. Candidates mustpossess a strong understanding of CNC machinery and programming, with the ability to program and setup Mills and lathes on new 3, 4 and 5 axis machines.Haas, Mazak, Solidworks and SOLIDCAM knowledge a plusMust be able to program and setup a CNC machine using CADCAM.\nCompany DescriptionSmall Family shop. Working 4 day work week, 10 hours per day.Company DescriptionSmall Family shop. Working 4 day work week, 10 hours per day.

Ghent, KY 41045 • (22.8 miles) • Full Time • 9/30/2026

GENERAL JOB DESCRIPTION: The Product Processing Engineer is a high-impact, strategic role designed for analytical innovators who thrive in high-stakes industrial environments. Functioning as part of an elite engineering "strike team," you will be deployed directly into production facilities to diagnose, troubleshoot, and resolve complex technical challenges. Unlike traditional maintenance or plant roles, this position focuses on unique, non-routine situations. You will be expected to look beyond immediate symptoms to reinvent systems, eliminate deep-seated bottlenecks, and design innovative processing strategies that ensure operational excellence ESSENTIAL JOB FUNCTIONS: 1. Rapid Deployment & Troubleshooting: Travel to various mill locations to lead root cause analysis (RCA) on critical pr

Frankfort, KY • (36.8 miles) • Full Time • 9/25/2026

Come work for OHM Advisors, the Community Advancement firm.With the singular mission ofAdvancing Communities, our diverse 800+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying, and construction engineering.We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem solving, design, and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward advancing the whole community today and well into the future.What You Will Contribute to OHM AdvisorsAs a Civil Engineering Intern, you’ll gain valuable hands-on experience while working alongside exp

Frankfort, KY • (36.8 miles) • Full Time • 9/5/2026

DescriptionWe're looking for a Senior Water Resources Engineer / Project Manager to join the HMB team!Engaged professionals lies at the heart of our vision statement. That’s why we strive to create a work environment that challenges and inspires our employees, igniting their passion and drive to achieve greatness each and every day, whether they’re in the office or working remotely. Opportunities in Frankfort and Lexington, KY and Mt. Juliet and Murfreesboro, TN.Key ResponsibilitiesLead the design of drinking water distribution and/or wastewater collection systems and/or wastewater and water treatment plants.Assess the need for drinking water and/or wastewater treatment systems based on current and projected future population and/or development demands; conduct feasibility studies for the

Frankfort, KY 40601 • (34.7 miles) • Full Time • 9/3/2026

TITLE:Assistant Professor in Manufacturing Engineering Technology COLLEGE:College of Business, Engineering & Technology (CBET)SCHOOL:School of Engineering & TechnologyDEPARTMENT: Department of Manufacturing Engineering Technology EFFECTIVE DATE: TBDCLASSIFICATION: FacultySTANDARD WORK HOURS:40LOCATION: Main Campus EMPLOYMENT STATUS: Full-time EMPLOYMENT CLASSIFICATION: Salary, Exempt PRINCIPAL PURPOSE OF JOB: The principal purpose of an Assistant Professor in Manufacturing Engineering Technologyis to contribute to the academic mission of the University by engaging in teaching, research, and service within the field of manufacturing engineering technology. In addition, an Assistant Professor plays a crucial role in advancing the knowledge and skills of students through effective teaching, c

Florence, KY 41042 • (21 miles) • Full Time • 10/1/2026

Company Description We Are Bosch.At Bosch, we shape the future by inventing high-quality technologies and services that spark enthusiasm and enrich people’s lives. Our areas of activity are every bit as diverse as our outstanding Bosch teams around the world. Their creativity is the key to innovation through connected living, mobility, or industry.Let’s grow together, enjoy more, and inspire each other. Work #LikeABosch• Reinvent yourself: At Bosch, you will evolve.• Discover new directions: At Bosch, you will find your place.• Balance your life: At Bosch, your job matches your lifestyle.• Celebrate success: At Bosch, we celebrate you.• Be yourself: At Bosch, we value values.• Shape tomorrow: At Bosch, you change lives.Job Description The Facilities (FCM) Engineer is responsible for monito

Cincinnati, OH 45238 • (29.4 miles) • Full Time • 10/1/2026

Job Summary: We are seeking a detail-oriented Laser Operator to join our small metal fabrication team. This position involves operating and maintaining laser cutting equipment to ensure precision and quality in metal part production. The ideal candidate will work with technical drawings and ensure products meet exact specifications.Key Responsibilities:Operate and set up laser cutting machines to process metal parts according to specifications.Review technical drawings and blueprints to ensure accurate cuts.Perform quality inspections on cut parts using measuring tools.Maintain and perform basic maintenance on laser equipment.Ensure all work complies with safety regulations and company standards.Assist with material handling and organization of cut parts.Qualifications:Experience operating

Cincinnati, OH 45245 • (31.3 miles) • Full Time • 10/1/2026

Why join the LNS team?Join a team that is the global leader and One-Stop-Shop provider of machine tool peripherals. When you join LNS you are joining a global team of thinkers, innovators, and doers with 45 years of proven experience in the machine tool industry.Summary Installs and repairs electromechanical machine tool accessories at various remote sites to eliminate future operational or service difficulties by performing the following duties.Essential Duties and Responsibilities Installs and repairs new or modified machine tool equipment at customer's facility to ensure full functionality according to specifications.Inspects malfunctioning or damaged product to determine nature and scope of problem.Visually inspects and tests machinery and equipment for defects and malfunctions.Analyze

Cincinnati, OH • (32 miles) • Full Time • 10/1/2026

Job Opportunity: Sales Engineer with Environmental Air Products in Cincinnati, Ohio(Mechanical Engineering / HVAC)Are you a Mechanical Engineer who enjoys building relationships as much as solving technical challenges?Environmental Air Products (EAP) is seeking a Sales Engineer to join our team in Cincinnati. This unique opportunity combines engineering expertise, customer relationships, and technical consulting within the commercial and industrial HVAC industry. As a leading manufacturer's representative, EAP partners with consulting engineers, contractors, and manufacturers to deliver innovative HVAC solutions throughout the Cincinnati and Dayton markets.For more than 50 years, EAP has represented industry-leading HVAC manufacturers and built a reputation as one of the most respected man

Cincinnati, OH • (32 miles) • Full Time • 10/1/2026

Hyliion is committed to creating innovative solutions that enable clean,flexible and affordable electricity production. TheCompany's primary focus is to develop distributedpower generators that can operate on various fuelsources to future-proof against an ever-changingenergy economy.Job PurposeThe Advanced Engineer, Combustion Aerodynamics is a hands-on technical contributor to the research, testing, and development program for the KARNO generator's reactor and oxidation system. This position executes combustion aerodynamics test campaigns, analyzes experimental and simulation data, and supports development and validation of combustion hardware. The position works closely with mechanical, thermal, and performance engineering to translate combustion test data into system design decisions an

Cincinnati, OH • (32 miles) • Full Time • 10/1/2026

ComResource is looking for a Platform Engineer – Adaptiv (Market Risk Systems).We are seeking a Platform Engineer to join the Market Risk technology team responsible for learning, supporting, and maintaining the Adaptiv market risk platform. This role plays a critical part in ensuring the stability, reliability, and scalability of a core risk system used for regulatory, stress testing, and daily risk reporting.This position is well-suited for an engineer who enjoys working with complex systems, building deep domain knowledge, and partnering closely with Risk, Quant, Data, and Infrastructure teams. You will be supported while ramping up on Adaptiv but will be expected to grow into a subject-matter contributor who can independently diagnose issues, make platform changes, and improve operatio

Cincinnati, OH 45249 • (43.5 miles) • Full Time • 10/1/2026

Super Systems Inc. is a Cincinnati based company and industrial automation systems integrator for the thermal processing industry and is seeking a highly organized and technically capable Engineering Services Coordinator. This role is critical to the successful coordination and execution of our field service projects, control system retrofits, and customer installations.Key Responsibilities:Coordinate Purchasing and Product Management to ensure material availablityReview electrical drawings for accuracy to support project readiness and executionWork closely with CAD team to Review Bills of Material for accuracyPrepare and configure industrial computers and systems for field deploymentCoordinate the scheduling of field engineers for installations and startupsManage all purchasing and shippi

Lexington, KY 40507 • (44.4 miles) • Full Time • 10/1/2026

Location:NationwideWhy CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on-the-job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee’s hard work and determination and REWARD results all while having fun!Our mission is to make life better by connecting people through innovative communication systems.We are seekingField Walkout Engineers who will perform walkouts for an entire town and/or subdivision to create field notes for new or e

Cincinnati, OH • (32 miles) • Full Time • 9/30/2026

At Clark Pacific, the Project Engineer supports the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this entry-level role applies engineering fundamentals, problem-solving, and communication skills across all levels of the organization.This role is ideal for recent graduates or early-career engineers (0–2 years) looking to gain exposure across design, manufacturing, and field operations within a design-build environment. This role is an 100% on-site position in West Sacramento or Woodland, CA. Relocation assistance may be available for qualified candidates on a case-by-case basis.Competitive Compensation Range:$85,000 - $110,000 annually, depending on experience + bonus