Bridgewater, MA • (37.4 miles) • Full Time • 10/8/2026

Position Located in Holbrook, MALooking for a Welder Fabricator, layout man to join our team10 paid HolidaysPaid Vacation timeOccasional OvertimeProfit sharing planResponsibilities / Qualifications:MIG weldingFlux core welding, mig weldingOccasional tig weldingReading and fabricating from in house shop drawingsKnowledge of shearsPress brake set up and formingPunch pressesBand sawsMust have a minimum of 3-5 years of miscellaneous metals experience.Overhead crane and rigging experience is a must.Must be able to work independently and with others.Must be able to pass random drug and alcohol testingMust be able to pass a DOT physical\nCompany DescriptionSmall family run steel fabrication business looking to add to staff for permanent positions.Company DescriptionSmall family run steel fabricat

Mattapoisett, MA 02739 • (20.1 miles) • Full Time • 10/8/2026

Position Summary:The FSQA Specialist will support the effective implementation of the Quality Management System and serve as the local technical resource at the facility. The HACCP Coordinator will support the ongoing review & development of all HACCP and quality assurance programs and ensure they meet applicable regulations and standards.What You'll Do:Develop and implement local site documents with oversight from direct supervisor.Interact with State, FDA and Shellfish inspectors to ensure ongoing compliance with federal regulations along with timely resolution of deficiencies as needed.Support facility compliance to policy and regulations through onsite monitoring and/or verification activities.Knowledge in wet sanitation and pre-operational monitoring procedures. Conduct/Review Pre-op

Taunton, MA 02780 • (40.8 miles) • Full Time • 10/8/2026

Job Title: Assembly OperatorJob type: 3 Month Contract to HireLocation: Taunton, MA 02780Pay Rate: $20.31/hrJob SummaryThe Manufacturing Assembly Operator is responsible for assembling, processing, inspecting, and packaging products according to work orders, customer specifications, drawings, and established quality standards. This position requires close attention to detail, accurate documentation, safe equipment operation, and adherence to Good Manufacturing Practices (GMPs), Operating Procedures (OPs), and company safety policies.Key ResponsibilitiesAssemble products according to work orders, customer specifications, drawings, and established quality guidelines.Follow proper production steps to achieve acceptable products while maintaining safety, quality, efficiency, and minimal scrap.

Middletown, RI 02842 • (43.9 miles) • Full Time • 10/8/2026

Description: Hybrid SchedulerSalary Range: $23.00 hourlySchedule: Full-Time | 37.5 hours/weekWHY JOIN NEWPORT MENTAL HEALTH?At Newport Mental Health, we invest in our employees by offering competitive pay, exceptional time-off benefits, opportunities for professional growth, and a supportive, mission-driven culture.What We Offer3 weeks of paid time off (PTO) to start, with additional PTO for Director-level rolesUp to 11 paid holidays each year1 paid Flex Holiday each yearSeparate paid personal daysSeparate paid sick time$3,000 annual bilingual pay incentiveMedical, dental, and vision coverageFlexible Spending Accounts (FSA) and Dependent Care Accounts403(b) retirement savings planCompany-paid life insuranceTuition reimbursementEmployee Assistance Program and wellness resources*Benefits and

Fall River, MA • (35.1 miles) • Full Time • 10/7/2026

COMPANY OVERVIEWCresco Labs is one of the largest public, vertically integrated, multistate operators in the cannabis industry. Our portfolio of in-house cultivated and manufactured brands features some of the highest quality, most awarded and most popular cannabis products in America. With dozens of locations nationwide, our owned and operated Sunnyside® dispensaries provide a welcoming, positive, judgement-free place to shop for anyone at any point on their cannabis journey. Founded in 2013, Cresco Labs' mission is to normalize and professionalize cannabis through our passionate employees. As stewards of the cannabis industry, our teams are constantly focused on supporting the needs of our fellow colleagues, consumers, customers, and communities alike. With a focus on Social Equity and E

Fall River, MA 02720 • (35.7 miles) • Full Time • 10/7/2026

Tcnico/a de Control de Calidad (QA) Raw SeafoodsEl objetivo del puesto,El/la Tcnico/a de QA ser responsable de asegurar que los productos fabricados cumplan con los estndares de seguridad alimentaria, calidad y especificaciones del cliente, as como con los requisitos de USDA, USDC, FDA y BRC.Principales responsabilidadesMantener actualizados los documentos y registros de control de calidad.Inspeccionar los productos e ingredientes que llegan a la planta.Realizar pruebas sensoriales de productos terminados y materias primas.Supervisar la seguridad alimentaria y la seguridad de los empleados en el rea de produccin.Realizar controles de calidad y completar la documentacin correspondiente.Realizar pruebas de alrgenos y tomar muestras mediante hisopos segn los programas establecidos.Acompaar al

Raynham, MA 02767 • (39.1 miles) • Full Time • 10/7/2026

Ready to keep advanced manufacturing running at its best? On first shift, you’ll be the go-to pro who prevents downtime and restores throughputfast. When production calls, you’ll bring a mix of hands-on skill, sharp diagnostics, and a calm, methodical approach. You will Lead preventive and corrective maintenance with minimal oversight to maximize equipment availability.Troubleshoot mechanical, electrical, and controls faults using prints, schematics, layouts, and specs.Enhance equipment and processes; collaborate with manufacturing engineering and assist on production/assembly to maintain flow.Support installation, qualification, debugging, and repair of Production and Development machinery.Procure parts and components necessary for maintenance activities.Fabricate or modify mechanical par

Taunton, MA 02780 • (40.8 miles) • Full Time • 10/7/2026

Benefits:401(k)Competitive salaryDental insuranceFlexible scheduleHealth insuranceOpportunity for advancementPaid time offVision insurance HVAC MECHANICAL DESIGN ENGINEER C. A. Crowley Engineering, Inc., established in 1973, is a multi-disciplined engineering firm, providing complete and integrated mechanical engineering services to public and private clients. We offer a single source of professional engineering and technical support services in the areas of plumbing, fire protection, heating, ventilating and air conditioning facilities engineering. We are located south of Boston easily accessible by routes 495 and 24. Multiple positions exist for an experienced Mechanical Engineer and Mechanical Designer for the design of HVAC, Plumbing and Fire Protection systems. The ideal candidate wil

Taunton, MA 02780 • (40.8 miles) • Full Time • 10/7/2026

Electro-Mechanical Equipment Technician (Pneumatics & Power Transmission) Taunton, MA | Hiring for 4th Shift (7:30 pm – 7:30 am) First, what’s in it for you? Pay: $30.30 – $36.19/hourBonuses & Extras: $2,500 Stay Bonus ($1,250 after 6 months; $1,250 after 1 year) and $175 Yearly Boot AllowanceShift Premiums: $1.50/hr. (2nd shift); $2.25/hr. (3rd shift) $2.00/hr. (4th Shift AM); $3.0/hr. (4th Shift PM)Benefits: 6% 401(k) company contribution; 3 medical, 3 dental, 3 vision options; Parental Leave PolicyPet Insurance; Auto & Home Discounts; Accident, Critical Illness, and Hospital Indemnity Insurance13 Paid HolidaysPerformance-Based Hourly Pay Does this sound like you? When equipment goes down, you quickly diagnose issues and get it back online.You’re hands-on with pneumatics and power trans

Pocasset, MA 02559 • (10.8 miles) • Full Time • 10/7/2026

DescriptionWe are seeking an experienced Quality Engineer to support product development, manufacturing, and supplier quality initiatives while driving continuous improvement efforts throughout the organization. This position plays a key role in ensuring products meet customer, regulatory, and internal quality requirements.Key ResponsibilitiesServe as the CAPA Chairperson, leading root cause investigations and corrective/preventive action activities to eliminate recurring nonconformances.Act as the lead Quality Engineer for a new vehicle product line.Partner with design engineering teams to ensure quality requirements are incorporated early in the product development lifecycle.Identify, document, and resolve product, process, and quality system issues.Collaborate with Manufacturing Enginee

North Dartmouth, MA 02747 • (29.9 miles) • Full Time • 10/7/2026

Join Our Team at Tegra Medical!We’re a trusted contract manufacturer for some of the biggest names in the medical device industry. Known for taking on complex projects that others can’t, we pride ourselves on precision and innovation. Located in Dartmouth, MA, this is a 1st shift full-time on-site position.Join a team that values quality, teamwork, and continuous improvement. This is an excellent opportunity for a detail-oriented individual who enjoys hands-on work and wants to grow in a precision manufacturing setting.Job SummaryThis is an onsite position located at our Dartmouth, MA facility.The purpose of the Inspector–I role is to perform visual inspections in order to identify conforming and nonconforming products.Role and ResponsibilitiesResponsible for QC Visual Inspections of finis

Freetown, MA 02702 • (34.4 miles) • Full Time • 10/7/2026

Licensed Refrigeration TechnicianPiping Systems Installations LLC (PSI) | Assonet, MA | Serving MA, RI and NHPSI is a mechanical contracting company specializing in HVAC, plumbing, fire protection, refrigeration, and industrial process piping. We're growing our refrigeration team and looking for an experienced, licensed technician who takes pride in quality work and thrives in a fast-paced field environment.What You'll Do:Install, maintain, and repair commercial and industrial refrigeration systems.Diagnose and troubleshoot mechanical problems on refrigeration equipment.Carry out routine maintenance and inspections to keep client systems running reliably.Follow industry standards and safety regulations on every job.Represent PSI professionally, communicating clearly with customers on site.

North Falmouth, MA 02556 • (9.9 miles) • Full Time • 10/6/2026

OverviewOpportunity: Engineering SupervisorPerform general maintenance functions to ensure guest service and sustainability standards are achieved and maintained throughout the hotel structure.Potential Career PathChief Engineer – Area Chief Engineer – Regional Director of EngineeringEssential Job FunctionsAssist Chief Engineer in interviewing, selecting, training, scheduling, coaching and supporting associates, ensuring they perform in accordance with established brand or hotel standards and consistent with HHM core values.Conduct room inspections and identify repair needs.Manage and coordinate bids, quotes and contracts for 3rdparty vendors.Oversee small projects, or PIPS, and manage and report on the work progress.Install or repair sheet rock and other wall coverings.Paint designated ar

Warren, RI 02885 • (43.4 miles) • Full Time • 10/6/2026

SummaryDirectly supervise employees in a fast paced environment assuring conformance to Food Safety Regulations, Food Defense, Quality Processing and all Corporate Policies.Essential Duties and Responsibilities:Lead and motivate the Food Safety & Quality Team in order to achieve daily goalsAssist in designing, implementation and enforcement of product quality and food safety control pointsCollect, log and report trends on information gatheredMaintain, create and communicate quality reporting dataCommunicate quickly and effectively with all levels of production managementKnow and understand all policies and standard operating procedures throughout the facility to audit, inspect and ensure complianceConduct and inspect or audit Blount facilities to assure compliance with applicable procedure

Brockton, MA 02301 • (45 miles) • Full Time • 10/6/2026

Description: DescriptionSelf Help Inc. is currently looking for an experienced Sr. WAP QCI Inspector & Technical ManagerAgency ProfileSelf Help, Inc. is a nonprofit Community Action Agency (CAA) created to help families and individuals stabilize and secure their lives through education, strategic assistance, and building opportunities in their communities. We provide a range of services for families and households across Southeastern Massachusetts.Job SummaryThe Sr. WAP QCI Inspector & Technical Manager conducts final QC and QCI inspections of Weatherization and Heating System installations to ensure that program standards of work are met, educates the client on energy conservation, resolves technical matters of project scope and client concerns and serves as a resource and mentor for othe

Middleboro, MA 02346 • (29.4 miles) • Full Time • 10/6/2026

The EmployerHolistic Health Group (HHG) is a vertically integrated medical and adult use Cannabis company built to produce high quality cannabis with an efficient and skilled workforce. The company is about to commence operations at its headquarters in Middleborough, MA, with future operations planned in other towns throughout the State.HHG is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.HHG aims to provide a healthy, welcoming, and enjoyable workplace for all employees. Ideal employment candi

Taunton, MA 02780 • (40.8 miles) • Full Time • 10/6/2026

OverviewPrimo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.Position: Maintenance Mechanic IIFactory Location: Taunton, MACompensation: $41.25 / hourShift: 3-4 Schedule | 5:00 AM - 5:00 PMSchedule: Rotating 12-hour shifts. Day or night shift assignments, as well as weekend and holiday work, may be required based on business needs. Six weeks of day-shift training is required.Benefits of working for Primo Brands:Health Benefits:Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA, hea

Bristol, RI 02809 • (43.3 miles) • Full Time • 10/6/2026

Located in Bristol, Rhode Island for over 50 years, Tri-Mack is a leading manufacturer of high-temperature thermoplastic and metal components and assemblies for critical applications in the aerospace-defense, semiconductor, energy and medical industries. Our broad capabilities include collaborative engineering, tool making, injection molding, thermoplastic composite processing, multi-axis CNC machining, bonding and assembly, testing and quality control - all within a modern, environmentally-controlled 60,000 sq. ft. facility. Our culture is based on values that promote respect, teamwork and accountability and we are committed to meeting customer requirements through our ISO 9001/AS9100/NADCAP certified quality management system.PLEASE NOTE - Applicants are required to pass a criminal backg

Marion, MA 02770 • (23.3 miles) • Full Time • 10/5/2026

Production Manager – Precast ConcreteLocation: Rochester, MassachusettsPosition Type: Full-TimePosition OverviewA leading precast concrete manufacturer is seeking an experienced Production Manager to oversee day-to-day production operations at its Rochester, MA facility.This position is responsible for leading production personnel, coordinating schedules and priorities, maintaining high standards for safety and quality, and driving continuous improvements in plant efficiency and productivity.The ideal candidate will have a strong background in precast concrete manufacturing and demonstrated experience successfully managing production teams in a plant environment.Relocation assistance is available for qualified candidates.Key ResponsibilitiesLead and supervise a production team of approxima

West Bridgewater, MA 02379 • (41.7 miles) • Full Time • 10/5/2026

We are expanding our team and are looking for a hands-on Maintenance Technician to keep production equipment running in a manufacturing environmentthis is not a facilities, janitorial, or property management role. Working under the direction of senior maintenance staff, you will handle routine repairs, respond to equipment breakdowns, and carry out scheduled preventive maintenance across the plant. This is a developing role with room to grow your skills across mechanical and electrical systems and a path toward greater responsibility over time.Responsibilities:Perform routine equipment maintenance and repairsComplete product changeovers as neededPerform preventive maintenanceReport major repair needs or parts shortages to the leadComplete maintenance paperworkQualifications:Basic mechanica

Rockland, MA • (43.5 miles) • Full Time • 10/5/2026

CNC Lathe & Mill Machinist: Program and set up a plus. We currently produce parts used across industrial, medical, and aerospace industries. We run Okuma, Mori Seiki, Hyundai-Kia, and HAAS with live tools, sub spindles & gantry loaders. Plus machining centers and an extensive grinding department.Attention to detail and ability to work to tight tolerances necessary. Must be highly motivated and team oriented to support quality and production goals. Opportunity for growth.Long established, stable company running four 10 hour days (Mon – Thurs 6:00 am to 4:30 pm) with overtime potential on Fridays. Fully air conditioned shop.Excellent benefits: We pay 100% of medical, paid Personal/Vacation Time Off (PTO), paid Holidays, & 401k Match.Full Time and Part Time hours available. Please send resume

West Yarmouth, MA 02673 • (10.5 miles) • Full Time • 10/5/2026

Hot & Cold TechnicianHarris Warren – A Tech24 CompanyLocation: Cape Cod, MACompensation Range: $32-$40/hrWhy Join Tech24?At Tech24, we invest in our technicians so you can focus on what you do best. Here’s what you can expect when you join our team:Weekly Pay – Reliable pay, every weekFully Equipped for Success – Company vehicle, gas card, uniforms, and phone providedWork-Life Balance – Generous paid time off, paid holidays, and your birthday offComprehensive Benefits – Medical, dental, vision, and short-term disability coverage (effective 1st of the month following your date of hire)Company-Paid Protection – Long-term disability and basic life insurance at no cost to youComprehensive Training Opportunities– Advance your skills through manufacturer certified programs, company training, or

New Bedford, MA 02745 • (27.1 miles) • Full Time • 10/5/2026

The Production Artist prepares artwork for embroidery as well as other techniques (screen-print, metals, accessories, etc.) The Production Artist also prepares art approvals for customers. Accurate, timely completion of the duties of the Production Artist is an essential component in ensuring that companywide goals of quality and on-time delivery are attained. The expectation is to support customer logo requests and production level spec art requests by providing support and collaboration with other departments.SCHEDULE-Monday through Friday8:30 am – 5:00 pm (Staggered shift start and end times may be assigned based on the needs of department)LOCATION-270 Samuel Barnet Blvd, New Bedford, MA 02745 On-site only; remote work is not available.DUTIES/RESPONSIBILITIESUse template design to creat

Rockland, MA 02370 • (43.5 miles) • Full Time • 10/5/2026

Join Dynavaca leader in highvacuum process equipmentand help us support some of the most advanced organizations in aerospace, defense, and thinfilm technology.Salary range: $76,000 to $95,000, based on experience.About DynavacDynavac is a leading engineering and manufacturing company with headquarters in Hingham MA and second location in Rockland MA. We specialize in custom highvacuum process equipment for applications including space simulation testing, thinfilm coatings, and other precision processes. Our systems combine advanced technologies in pressure vessel design, material handling, automation, and integrated control systems.Position OverviewWe are seeking a skilled Manufacturing Engineerto join our Engineering team. The ideal candidate has experiencein construction and/or manufactu

Rockland, MA 02370 • (43.5 miles) • Full Time • 10/5/2026

Gale Associates, Inc. is seeking a Senior Staff Engineer to join our Rockland, MA office. Gale is a well-respected national engineering/planning firm celebrating over 62 years in business and rated one of Zweig Group’s “Best Firms to Work For” for the past 13 consecutive years.Requirements:Must have a pertinent Bachelor’s Degree (Civil, Construction, or Structural Engineering) and a minimum of 5+ years in exterior building envelope renovations, analysis, design and construction administration.Experience with moisture intrusion, evaluations, and renovation designs.Excellent writing/presentations skills and proficient computer skills (MS Office, CAD, and Outlook are required).Technical experience in building envelope.Registration path required, an EIT or Professional Engineer’s (P.E.) licens

Hyannis, MA 02601 • (8.2 miles) • Full Time • 10/4/2026

THIS NOTICE IS BEING PROVIDED AS A RESULT OF, AND IN CONNECTION WITH, THE FILING OF A PERMANENT ALIEN LABOR CERTIFICATION APPLICATION BY JITEN HOTEL MANAGEMENT, INC. D/B/A COURTYARD BY MARRIOTT CAPE COD HYANNIS, FOR THE JOB OPPORTUNITY IDENTIFIED BELOW. ANY PERSON MAY PROVIDE DOCUMENTARY EVIDENCE BEARING ON THE APPLICATION TO CERTIFYING OFFICER OF THE DEPARTMENT OF LABOR.U.S. Department of LaborEmployment and Training AdministrationOffice of Foreign Labor Certification200 Constitution Avenue, NWRoom N-5311Washington, DC 20210POSITION DESCRIPTIONHotel Maintenance TechnicianPerform preventative maintenance in guest rooms, meeting rooms and public spaces of the hotel; maintain/repair all guest rooms; perform minor repairs on hotel grounds; perform maintenance related and general cleaning; rem

Brockton, MA 02301 • (45 miles) • Full Time • 10/4/2026

Crown Linen is Hiring Production Associates- Brockton, MA POSITION SUMMARYWith direction from the Production Manager & Floor Supervisors, responsibilities include sorting and assembly of clean garments in a Commercial Laundry environment, packing of orders and quality control, counting and inventory control and other areas of production as needed.PRIMARY DUTIES AND RESPONSIBILITIESSorting, inspecting & counting of garmentsOperating machinery following established procedures and policiesPerforming daily inspections before beginning operationsFollowing all safety policies and proceduresMainting company quality standardsAttends all staff meetings, training, and educational classes as requiredTOOLS, EQUIPMENT, MACHINES, AND WORK AIDSLaundry baskets, and linen binsCarts and conveyorsOverhead ra

Abington, MA 02351-1981 • (44.3 miles) • Full Time • 10/3/2026

Strickland Brothers 10 Minute Oil ChangeJoin a thriving team where your growth is our priority!At our company, your career path is not just a journey; it’s a fast track to success. We’re committed to advancing our employees' careers and recognizing talent at every level.As a Shop Technician, you’ll be part of a fast-paced, team-driven environment where you learn real skills, work with your hands, and see the impact of your work every day. Many of our leaders started right here in entry-level roles and built successful careers through hands-on learning, teamwork, and performance. This is more than a job. It’s a chance to build a career.If you’re ready to elevate your career and make a meaningful impact, we want you on our team!Why Team Strickland:We invest in our team members with competiti

Brockton, MA 02301 • (45 miles) • Full Time • 10/3/2026

Description: The RF Engineer IV is a fully proficient engineer responsible for designing, analyzing, and testing RF and microwave systems used in Diamond’s rotary joints, slip rings, and electromechanical assemblies. This role independently executes complex RF engineering tasks, leads moderate to high complexity analysis efforts, and ensures RF designs meet performance, reliability, and manufacturability requirements.Requirements: Key ResponsibilitiesAbility to evaluate and effect antenna performanceAbility to guide the development of new antennasDesign and analyze RF circuits, components, and system architectures for Diamond products.Perform RF measurements, including S-parameters, insertion loss, isolation, phase matching, and VSWR.Develop RF models and perform simulations using HFSS, CS

Buzzards Bay, MA 02532 • (12.9 miles) • Full Time • 10/3/2026

This position is a DIRECT HIRE ROLE from day oneResponsibilities:Setup and operate CNC milling and or Lathe machines producing precision parts (1st shift)Operate Swiss machines (single and/or multiple spindle) (2nd shift only)Set up and operate CNC milling machines (5-axis and mill-turn) (1st or 2nd)Programming using CAD/CAM software – Mastercam (1st shift)Reading and understanding blueprints, engineering drawings, GD&T symbols and specificationsRoutine maintenance on machines as neededAbility to edit at the machineUsing hand tools, micrometers, and other measuring instrumentsInspecting finished partsTroubleshooting and resolving issuesQualifications:Previous CNC milling or Lathe experienceExperience with Fanuc, Okuma or Brother controlsExperience with CAD/CAM software – Mastercam is a PLU

Plymouth, MA • (21.2 miles) • Full Time • 10/3/2026

Entry-Level Manufacturing Roles Hiring Now in Plymouth, MALocation: Plymouth, MAPay Range: $17.50 $19.50/hourShifts Available: 1st, 2nd, and 3rdExperience Required: None training providedAerotek is hiring for multiple entry-level manufacturing positions in Plymouth. These roles offer hands-on experience in a clean, safety-focused environment with opportunities for growth and advancement. If you're dependable, detail-oriented, and ready to start a rewarding career, we want to hear from you.Open Positions Include:Production Associate (Racker)Wire and fixture parts onto racks for cleaning, plating, and coatingRead instructions and ensure correct part orientationCount and inspect parts, maintain equipment, and meet daily quotasEtching Technician (Etcher)Operate chemical etching tanks to create

New Bedford, MA 02745 • (27.1 miles) • Full Time • 10/3/2026

CNC Machinist (milling and turning) Lead Opportunity Available Location: New Bedford, MA About Edson Pumps & Jacob E. Marine Edson Pumps/Jacob E. Marine (formerly Edson Marine), a member of the Potentia Manufacturing Group, specializes in manufacturing diaphram and Peristaltic Pumps for marine pump out and endless industrial applications as well as sailboat steering systems and components.We are seeking a CNC Machinist who enjoys the challenge of producing a wide vareity of machined components and assemblies and takes pride in quality workmanship. This role offers the opportunity to work with modern equipment (as well as old-school machinery), solve real manufacturing challenges, and contribute to a team where craftsmanship, collaboration, and continuous improvement are valued.For qualifie

Carver, MA 02330 • (24.6 miles) • Full Time • 10/2/2026

Currently seeking a Maintenance Supervisor/Electrician for a full time temporary to permanent or Permanent Direct Hire for right candidate position on Carver, MA.Requirements of Maintenance Supervisor/Electrician include:-Perform maintenance and repairs of various types of equipment-Closely supervise and manage maintenance department-Complete performance evaluations, disciplinary actions and other personnel actions as needed-Test, diagnose, and trouble shoot issues and repairs needed to facility and machines-Research and recommend cost effective replacement parts-Install and service generating equipment, switchboards, motors, starters, lighting circuits and other electrical components-Prioritize and delegate tasks-Maintain computerize maintenance management system-Coordinate with outside c

Middletown, RI 02842 • (43.9 miles) • Full Time • 10/2/2026

MIKEL invests in people and technology – empowering the creative process, building responsive relationships, and propelling innovative solutions from conception to completion for the U.S. Navy. MIKEL is a small woman owned business that has been providing Undersea Warfare Solutions to the Department of Defense since the company’s inception in 1999.Be a part of our dynamic team whose solutions and services enable the Navy to solve their toughest problems and meet their mission requirements. We have undersea operations experience, combined with engineering and specific subject matter expertise, that provides an in-depth understanding of the problem and a novel, innovative and cost-effective solution. MIKEL is committed to providing an environment that challenges its employees to use and adva

Scituate, MA 02066 • (44.2 miles) • Full Time • 10/2/2026

Benefits:401(k)401(k) matchingBonus based on performanceCompany partiesCompetitive salary Manufacturing Maintenance Technician Scituate, MA ResponsibilitiesPerform preventive maintenance and repairs on concrete pipe manufacturing equipment, including small engine repair and replacement.Conduct routine maintenance tasks such as greasing machinery and vehicles to ensure optimal performance.Replace machine parts as needed to minimize downtime and maintain production efficiency.Troubleshoot, repair, and maintain machinery within the manufacturing plant.Coordinate outsourced repairs with external truck repair shops as required.Complete all necessary repair documentation and purchase orders accurately and in a timely manner.Monitor vehicle registrations and inspections to ensure compliance and u

Raynham, MA 02767 • (39.1 miles) • Full Time • 10/2/2026

Job Title:Foundry Operator Location:Raynham, MA At Kelly® in partnership with Johnson & Johnson, we’re passionate about helping you find a job that works for you. How about this one? Job Summary: We are seeking an energetic and dependable Foundry Operator to join our team. As a Foundry Operator, you will play a key role in supporting foundry and post-processing operations, ensuring all parts meet strict quality and safety standards. Shifts & Pay Rates:1st Shift:Monday – Friday, 6:00am – 2:00pm |$21.00/hr2nd Shift:Monday – Friday, 2:00pm – 10:00pm |$23.10/hr3rd Shift:Sunday – Thursday, 10:00pm – 6:00am |$24.15/hrKey Responsibilities:Handle, grind, deburr, trim, and clean cast parts.Prepare parts for the next stage of production.Perform inspections to confirm quality standards.Move parts thr

Middleboro, MA 02346-2795 • (31.8 miles) • Full Time • 10/2/2026

As an R&D Lab Test Technician with Rexa, you will be responsible for managing lab activities, maintaining test equipment & systems as well as conducting detailed test plans and documenting the results in an accurate and precise manner.Responsibilities:Support the execution of system test plans on new and existing products and documentSupport the execution of design verification plans on new and existing products and documentSupport or execute software regression testing and document results.Write basic test reports and documentDebug/analyze customer electronic, software and hydraulicMaintain and upkeep the R&D lab andCreate maintenance schedules for hydraulic equipment and monitor / manage schedules for lab activities.Assemble and repair hydraulicConstruct new electronics and hydraulic sys

Taunton, MA 02780 • (40.8 miles) • Full Time • 10/2/2026

Job SummaryThe Production Lead is responsible for overseeing daily packaging and labeling operations in a regulated manufacturing environment. This hands-on leadership role ensures compliance with Good Manufacturing Practices (GMP/cGMP), Good Documentation Practices (GDP), Standard Operating Procedures (SOPs), and customer-specific requirements. The incumbent leads a team of packaging staff, performs quality inspections, manages labeling processes, supports production logistics, maintains manufacturing tooling and cleanliness standards, and contributes to process improvement initiatives such as Value Stream Mapping.Key ResponsibilitiesConduct inspection of packaged products, including verification of labels and batch records for accuracy, completeness, and compliance with regulatory and cu

West Bridgewater, MA 02379 • (41.7 miles) • Full Time • 10/2/2026

Description: About Double EDouble E is a global manufacturing company with more than 50 years of innovation behind us and is proud to be a trusted name in web handling and converting. Headquartered in West Bridgewater, MA with Production Plants across North America and Italy, we build high-performance equipment and engineered solutions that keep modern manufacturing moving. Our productsfrom core chucks and shafts to safety chucks, rollers, web guides, and material handling systemshelp customers boost speed, improve safety, and solve tough production challenges across packaging, tissue, labels, film, and more.If you’re excited by real world engineering, hands on problem solving, and the chance to help shape what’s next, Double E is a place to build an impactful career.Learn more about Doubl

West Bridgewater, MA • (41.7 miles) • Full Time • 10/2/2026

One of our prestigious clients in the building automation and industrial technology industry is a global technology company with 100+ years of history, 25,000+ patents, and 7,000+ engineers. Its portfolio spans 4 major business areas and serves customers across industries including buildings, manufacturing, healthcare, data centers, and utilities worldwideWhy Join This Team?Competitive salary.Medical, dental, and vision coverage with multiple plan options.Prescription drug coverage and telehealth access.Mental and behavioral health resources.Wellness programs and health coaching.401(k) plan with employer matching.HSA and other pre-tax savings/spending accounts.Short- and long-term disability and life insurance.Paid time off and leave programs.Family support resources, including childcare a

West Wareham, MA 02576 • (20.5 miles) • Full Time • 10/1/2026

Benefits:Bonus based on performanceFree uniformsPaid time offFlexible schedule Architectural metal fabrication studio is seeking a skilled metal painter/finisher to join our team, located in Wareham, MA The right candidate must be self-motivated, understand and be able to execute the entire finishing process from sanding to patina and lacquer on various metals/substrates. The ability to spray lacquer and paints effectively and consistently is a must. Two plus years experience required. Experience in wood finishing, auto-body and/or metal fabrication is a plus. Some training in the patina process is to be expected. The work week consists of Monday to Thursday, 7:30am to 6:00pm, (4) 10 hour days, but is slightly flexible. Employer contributed health insurance and paid time off are part of co