Please Accept our Privacy Policy
Albany Medical Center
Albany, NY 12208 • (38.2 miles) • Full Time • 10/21/2026
Department/Unit: Nuclear Medicine Work Shift: Day (United States of America) Salary Range: $94,957.00 - $147,183.00(salary commensurate with experience) The Nuclear Medicine Technologist under the direction of the Supervisor and Director of Imaging and Related Services performs technical procedures and assists in the clinical evaluation and care of the patients. The Nuclear Medicine Technologist utilizes their modality to create diagnostic images and provide their patients with a safe positive experience. In radiation producing modalities, technologists practice and enforce the radiation safety measures in New York State Department of Health code part 16. Technologists support teaching and continued learning as the technology changes for both them and others. The technologist prepares andOffice Hours
Troy, NY 12182 • (40.2 miles) • Part Time • 11/13/2026
About the Engagement Office Hours is seeking experienced materials science researchers to contribute to an active AI research initiative focused on evaluating how advanced AI systems approach real-world materials science research problems. As a Materials Science Expert, you’ll use your own research expertise to develop scientifically grounded problems, evaluate how AI models respond to them, and create expert-quality solutions that establish the correct answer and reasoning. This is a fully remote, asynchronous opportunity designed for researchers interested in applying their expertise to the development and evaluation of advanced AI systems. What You’ll Do Develop original research problems grounded in your area of materials science expertise Create detailed solutions and supp
Clean Harbors
Unionville, CT 06085 • (41.8 miles) • Full Time • $26.00 / hr • 11/16/2026
Clean Harbors in Bristol, CT is seeking an Environmental Field Chemist (CleanPack Chemist CDL) to handle, segregate, pack, and inspect chemical waste in accordance with Federal/State/Local regulations and our company policies and procedures. This position will work both indoors and outdoors at plants, labs, customer sites and are responsible for assisting with lab packs within customer facilities, household hazardous waste (HHW) collections and lab moves. This is a customer facing position, working at customer sites daily . The Environmental Field Chemist are (NOT) laboratory-based Chemist. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean HarborsGoodwinRecruiting
Agawam, MA 01001 • (34.8 miles) • Full Time • 11/16/2026
An established Machinery Manufacturing firm is looking for a Field Service Engineer to join their Team! The Field Service Engineer is tasked with installing, maintaining, and troubleshooting CNC machines for an OEM environment. This role requires up to 75% travel within the local tri-state area, with opportunities for additional domestic travel. Job Responsibilities: Install, maintain, troubleshoot, and repair CNC machines (Citizen and Miyano equipment preferred) Replace components such as ball screws, motors, and cartridge spindles Utilize ladder logic and diagnostic functions across various control systems Provide phone-based technical support for troubleshooting, on a daily basis Align and adjust tooling Repair spindle bearings Align and interface bar feed units Perform first-part runofilocatum
Farmington, CT 06030 • (43.7 miles) • Full Time • $65,000 to $95,000 / yr • 11/16/2026
Engineering Change Specialist, ECN and BOM Management Location: Farmington, CT Job Type: Full-time Pay: $65,000 to $95,000 per year Own the engineering change process that keeps products, BOMs, and production aligned, working at the center of every cross-functional team. Must-Haves Strong knowledge of engineering drawings, bills of material (BOMs), and change control procedures Experience with ERP/MRP and PLM systems Strong mechanical aptitude and working knowledge of the metric system Understanding of manufacturing processes and inventory considerations Strong organizational, analytical, and communication skills Ability to manage several engineering changes at once What You'll Do Manage and improve the engineering change management process, including ECN workflows and procedures Validate,ProAmpac
Westfield, MA 01085 • (26.9 miles) • Full Time • 11/16/2026
The Summer 2027 Intern (Continuous Improvement Engineer) will learn from and participate with our Corporate Operational Excellence Team’s ongoing deployment of our continuous improvement program into one of our many manufacturing sites in the US. This internship will shadow and work with the local leadership teams to learn and assist with the implementation of lean manufacturing concepts with the front-line leaders and operators on our manufacturing shop floor. The project objective is to reduce manufacturing waste, improve operational efficiencies, and develop a problem-solving culture across a site. This internship will provide the incumbent the opportunity to learn about and participate in this type of implementation in a hands-on setting. MAJOR RESPONSIBILITIES Lead continuous imHANWHA AEROSPACE USA LLC
Broad Brook, CT 06088 • (42.2 miles) • Full Time • $73,442 to $110,164 / yr • 11/17/2026
Job Title: Quality Engineer Exempt Status: Exempt Location: East Windsor, CT Company Description: Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: The Hanwha Aerospace USA Quality Engineer will be responsible for all activities associated with the Quality function reporting directly to the Quality Manager. Essential Functions: Ownership of quality performance of assigned part numbers/family. Creation of FAIRs and review of FAIRs as needed through net inspect. Participation and ownership of PPAP for assigned partsRobert Half
Albany, NY 12207 • (36.2 miles) • Full Time • $60.00 to $68.00 / hr • 11/17/2026
We are looking for an Automation Engineer- Level I to support systems engineering initiatives in Albany, New York. This Long-term Contract opportunity is ideal for a detail-oriented individual who can translate operational needs into clearly documented requirements while working closely with technical teams and business stakeholders. The role focuses on analyzing current-state processes, supporting automation-related deliverables, and helping ensure that project outputs are accurate, complete, and usable for downstream decision-making.\n \n \nResponsibilities:\n \n• Analyze existing state system processes and gather detailed functional requirements to support automation and systems engineering efforts.\n \n• Document current-state and future-state business rules, workflows, and operationalEliassen Group
Bloomfield, CT • (40.3 miles) • Full Time • 11/17/2026
Description: On-site in Bloomfield, CT Our client seeks an experienced electromechanical Designer/Drafter to create and modify drawings, models, parts, and assemblies using Creo. This role supports Service Engineering’s Design Services group and requires proficiency with Windchill for data and workflow management. The position focuses on packaging for sheet metal, PCB, and electromechanical components, with an expectation to manage multiple tasks, collaborate effectively, and respond to requests in a timely manner. Due to client requirements, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k with company matching, and life insurance. Rate: $37.00 to $42.00/hr. w2 RespEnjet Aero, LLC
Bloomfield, CT 06002 • (40.4 miles) • Full Time • $80,000 to $125,000 / yr • 11/17/2026
Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Your work has a destination! Enjoy competitive pay, excellent benefits, a company profit sharing bonus plan, and more while building precision aerospace components that help aircraft fly safely around the world. Join a growing, industry-leading aerospace manufacturer where your work makes an impact and your career can take off. Position Description: Manufacturing & Process Engineer is responsible for determining methodology and designs behind producinMRINetwork Jobs
Springfield, MA 01103 • (35.2 miles) • Full Time • 11/17/2026
This Quality Engineering role is an exceptional opportunity for a Quality Career professional to join an organization with a commitment to quality from the top down, every employee is working on Continuous Improvement and ensuring the company continues to rank number one in their business sector for over 30 years and counting. We are looking for a talented and experienced Quality Engineer who has experience with the Automotive Industry and committed to excellence in their approach to quality. This Career Role offers opportunities to move throughout the organization and upward into several product markets and segments moving up the career ladder in Quality and Operations. The Individuals we are looking for will have these qualities and skills for consideration: Bachelor's Degree 5 Years ofNE-XT USA
Windsor, CT 06095 • (41 miles) • Full Time • $80,000 to $110,000 / yr • 11/17/2026
About NE-XT\n New England Expert Technologies (NE-XT) is a precision manufacturing organization supporting customers in aerospace and other highly regulated industries. We are committed to quality, continuous improvement, and delivering reliable products that meet the highest industry standards. \nPosition Summary\n NE-XT is seeking a Product Quality Engineer (PQE) to support aerospace manufacturing quality initiatives through inspection planning, nonconformance management, corrective action leadership, supplier quality coordination, and continuous improvement. This role partners closely with engineering, operations, and quality leadership to reduce defects, improve process capability, and ensure customer compliance. \nCompensation\n $85,000–$110,000 annually, depending on experience, qualZulu Pods
Northampton, MA • (28.2 miles) • Full Time • 11/16/2026
Zulu Pods is building the critical infrastructure behind expendable and attritable platforms, and we are seeking highly motivated team players to join us in this mission. At Zulu Pods, we operate with Integrity , take Extreme Ownership , lift each other up with Servant Leadership , win by Exceeding Expectations , and succeed with Optimistic Vision . If these values describe you, please continue: We are seeking an experienced Manufacturing Engineer to join our team. The ideal candidate will have a strong background in machining precision components in the aerospace industry, with proficiency in MasterCAM and CNC toolpath generation for lathe and milling operations. You will be responsible for interpreting complex engineering drawings and CAD, programming toolpaths, and ensuring that all tooDennis Group Inc
Springfield, MA 01103 • (35.2 miles) • Full Time • 11/16/2026
As a design/build engineering firm and general contractor that designs and builds food and beverage processing facilities, Dennis Group’s Automation & Controls Engineers work closely with our process, packaging and building engineers to meet our clients’ expectations in startup, commissioning, and qualifying their food and beverage production facilities. The role requires regular onsite presence to ensure necessary diagnoses, troubleshooting, and operational startup of our client’s production lines, equipment, and facilities. Our Automation & Controls Engineers are frequently facing engineering challenges in applying standard engineering techniques to design, develop, and maintain instrumentation or control systems. Both software and hardware design and troubleshooting skills and abilitiesActalent
Albany, NY 12201 • (36 miles) • Full Time • $20.00 to $23.00 / hr • 11/16/2026
Now Hiring for a Civil Engineering Technician! \n book here for more info! \n\n Job Description \n This role focuses on hands-on concrete and construction materials testing in the field on a major infrastructure project. You perform concrete sampling and testing, accurately document and report results, and collaborate closely with a small project team on site. The position is primarily field-based rather than office or laboratory work, offering opportunities to grow your skills and advance your career within a large, employee-owned AEC environment. \n Responsibilities \n \n Perform hands-on concrete testing in the field on an active major infrastructure project. \n Conduct concrete sampling and testing in accordance with applicable standards and procedures. \n Carry out construction materiIgnis Global Recruitment
Springfield, MA • (37.4 miles) • Full Time • 11/16/2026
\n Title: Electrical Engineer \n \n \n Location: Remote or hybrid, in New England. The role carries a regular on-site expectation which suits someone based in New England. For a senior engineer who holds a PE and is set up to work independently, that expectation is flexed, which opens the role more widely across the region.\n \n \n Company: Multi-discipline engineering firm \n Salary: Up to $160,000, plus a discretionary annual bonus plus up to $10,000 sign on, if required \n \n About the work \n This is consulting-side building services electrical, taken from concept through construction administration. The engineer who designs a system is the one who answers for it on site, so the seat does not split into a drawing job and a site job done by different people. \n The firm works across rouTsugami Machining - America
Windsor, CT 06095 • (41 miles) • Full Time • $58,000 to $84,000 / yr • 11/16/2026
Join a USA Today Top Workplace! \n Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufactures maintain a competitive advantage in the world economy by improving productivity. \n Summary of Responsibility: \n Innovative Machinery Group is seeking an experienced CNC Programmer to support multi-axis turning operations, ranging from 2-axis tailstock lathes to sub-spindle / Y-axis configurations with the knowledge base to help support the milling department as needed. \n This is a hands-on role requiring a strong presence on the shop floor. The ideal candidate will be actively involved in developR & R Window Contractors, Inc.
Easthampton, MA 01027 • (24.7 miles) • Full Time • $60,000 to $100,000 / yr • 11/15/2026
Benefits: Profit Sharing Plan FSA for Medical/Child care Disability Insurance Life Insurance Health insurance Paid time off 401(k) Dental insurance Join our Team: We are seeking a motivated and detail-oriented Facade & Panel Project Engineer / Manager to join our team. If you have at least five years of commercial construction experience, experience with facade systems, architectural panels, drafting, detailing, engineering, or project management, or a degree in Construction Management, Building Construction Technology, Engineering, Architecture, or a related field, we encourage you to apply. Not a Project Manager Yet? That's okay. Whether you're an experienced Project Manager or a facade professional looking to transition into project management, we want to hear from you. Candidates withGeneral Dynamics Mission Systems, Inc
Pittsfield, MA 01201 • (11.1 miles) • Full Time • $152,462 to $169,138 / yr • 11/14/2026
Overview \n General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! \n \nCheech & Chongs Dispensoria
South Deerfield, MA 01373 • (33.3 miles) • Full Time • $18.00 / hr • 11/14/2026
OUR MISSION We believe that different perspectives ignite innovation and drive us forward. Our mission is to create a vibrant workplace where everyone feels seen, heard, and empowered to reach their full potential. We're passionate about equal opportunities, championing community engagement, and fostering an environment where open dialogue and mutual respect thrive. Just like how different strains bring their own unique highs, our diverse team infuses fresh ideas and perspectives into everything we do! What You'll Do: Hey there, all you cool cats and cannabis enthusiasts! We're Cheech and Chong Dispensoria, and we're looking for a Groovy Budtender to join our laid-back team. If you're all about spreading good vibes, helping folks find their perfect strain, and creating a mellow atmosphere,EchoStar
Springfield, MA • (37.4 miles) • Full Time • $24.25 / hr • 11/14/2026
What Success Looks Like (Objectives):\n What You’ll Do: \n You’ll visit customers’ homes, solve problems, and introduce them to smart home tech. \n \n Install and service DISH, Starlink and smart home solutions in customers’ homes \n Teach customers how to use their tech and offer additional services when helpful \n Keep a clean work area and maintain a professional attitude while working independently but staying connected with the team \n What’s in it for You: \n \n Career Growth: Start here and grow fast! Many of our leaders began in this role, with opportunities to move into different departments for new challenges \n Pay Increases: Automatic promotion after 6 months with a $1/hour raise. Additional promotions with 5–10% pay increases based on performance \n Bonus Potential: Earn up toTEKsystems
Albany, NY 12201 • (36 miles) • Full Time • $20.00 to $30.00 / hr • 11/14/2026
Description \n The Field Service technician will be responsible for installation, decommissioning, and testing of PCs and PC related equipment. This job requires hardware expertise, and basic knowledge of cabling and cable organization. Must be comfortable with inconsistent work schedule and potentially working after hours. Technology includes setting up, cable managing, and validating with a miller rep the following: Monitor, Keyboard, facecam, misc cords/ cables, epos speaker, polycon phone. \n Skills \n hardware, Support, Troubleshooting, Install, Cable, Installation, Service, Cabling \n Top Skills Details \n hardware,Support,Troubleshooting,Install,Cable,Installation,Service,Cabling \n Additional Skills & Qualifications \n MUST be able to communicate well w/ end client \n Job Type & LoLiquidPiston
Suffield, CT 06078 • (36.6 miles) • Full Time • 11/14/2026
Metallurgical Engineer This role is fully onsite in Bloomfield, CT, five days per week, and the company will be relocating to Suffield, CT later in 2026. About LiquidPiston: LiquidPiston, Inc. is developing a fundamentally new rotary internal combustion engine based on our patented thermodynamic cycle. With applications across aerospace, defense, commercial, and industrial markets, we are redefining what’s possible in compact, efficient power generation. Join our mission to develop game-changing engine technology using advanced materials and manufacturing processes. Position Overview: LiquidPiston is seeking a Metallurgical Engineer to lead materials-focused efforts in support of engine design, development, and testing. This hands-on role is critical to enhancing performance, durability, aThe Reserves Network Inc
West Hartford, CT • (44.1 miles) • Full Time • 11/14/2026
\n Senior Design Engineer\n \n \n West Hartford, Connecticut | Full Time | Direct Hire\n \n Salary: $130,000 to $160,000\n \n \n \n \n \n What Matters Most\n \n \n • $130,000 to $160,000 base salary, with flexibility toward the top of the range for highly experienced candidates\n \n \n • Full time, direct hire opportunity in West Hartford, Connecticut\n \n \n • 8+ years of engineering experience in firearm product design and development\n \n \n • Strong firearm mechanics, ballistics, materials science, and manufacturing knowledge\n \n \n • PTC Creo CAD experience required\n \n \n • Full product lifecycle ownership from concept and prototyping through testing and production\n \n \n • Technical leadership opportunity with mentorship responsibility for junior engineers and design staff\n \n \Amwins Internships
Farmington, CT • (44.2 miles) • Full Time • 11/14/2026
At Amwins, we succeed together . Our internship program was recognized as one of the 2026 RISE Elite 50 Internships, and it reflects what we believe: great careers start with great experiences. That's why we've built a culture centered around collaboration, mentorship, and growth. At Amwins, students are given the opportunity to contribute in meaningful ways, learn from experienced industry professionals, and gain exposure to the business from day one. Interns will gain hands-on industry experience, participate in professional development opportunities, and work alongside experienced professionals on real business initiatives. Along the way, Interns will strengthen key professional skills and develop the confidence to grow into future leaders at Amwins. Why Amwins? We're not just a companyVIABILITY, INC
Springfield, MA 01104 • (35.6 miles) • Full Time • $120,000 to $135,000 / yr • 11/13/2026
Position Title: Full Stack Engineer Location: Remote EST Time Zone Employment Type: Full-Time, Salaried Exempt Schedule: Monday–Friday About the Opportunity Cascadience, a VIABILITY Company, is building Volio , an innovative AI-powered digital companion designed to support neurodivergent individuals, including people with ADHD, Autism, and Anxiety. Volio is evolving into an engaging student companion that combines AI-powered support, intelligent scheduling, long-term memory, and gamified experiences to help reduce cognitive overload and support independence. This is a unique opportunity to join a startup initiative backed by a 56-year established organization . As a Full Stack Engineer, you'll help build and scale the technology behind Volio while working closely with product, operations,AAA USA
Windsor Locks, CT 06096-1152 • (39.1 miles) • Full Time • $55.00 to $60.00 / hr • 11/13/2026
Must be willing to temporarily and/or permanently relocate to Kinston, NC for work. We are seeking skilled NDT professionals experienced in inspecting aircraft components, materials, and assemblies without causing damage. Candidates should have hands-on experience with ultrasonic inspection methods and the ability to evaluate components for compliance with engineering, quality, and customer requirements. This is an excellent opportunity to join long-term aerospace programs offering competitive pay, overtime opportunities, relocation assistance, and career growth within the aerospace industry. Why Aerospace Professionals Choose AAA USA: Competitive Pay. Overtime Opportunities. Long-Term Aerospace Programs. Multiple U.S. Locations. Relocation Assistance Available. Referral Programs. Medical,Aptyx
West Torrington, CT 06790 • (32.4 miles) • Full Time • $85,000 to $115,000 / yr • 11/12/2026
Position Summary We are seeking a highly technical, hands-on Mechanical Manufacturing Engineer to support New Product Introduction (NPI), manufacturing process development, product launches, and ongoing production operations within a growing medical device manufacturing environment. This role is responsible for developing, implementing, and improving manufacturing processes, equipment, tooling, fixtures, and production methods to ensure products can be manufactured safely, efficiently, consistently, and at the required quality standards. The Mechanical Manufacturing Engineer will work closely with Program Management, Product Development, Quality, Operations, Tooling, Maintenance, and Engineering to take products from initial development through production launch and to provide ongoing engiQuest Global
Windsor Locks, CT 06096 • (39 miles) • Full Time • $30.00 to $35.00 / hr • 11/12/2026
First Article Inspection/Quality Engineer Windsor Locks, CT, USA What You Will Do: Prepare theFirst Article Inspectionutilizing software such asDISCUSto balloon the drawing and compile theAS9102Cpackage to release manufacturing to record the actuals associated with this process, gathering all the necessary information required to include in the FAIR package. Deliver theFirst Article Inspectionpackage to manufacturing to record and verify what’s called out on the engineering drawing. Compile the actuals and populate them using ballooning software to compile theAS9102C(Forms 1,2, and 3) and create theFirst Article InspectionReports (FAIRs). Import theFirst Article InspectionPackage toNet Inspect Notify manufacturing and quality of the recorded non-conformances, ensuring that the necessary acButler America Aerospace
Windsor Locks, CT • (39.1 miles) • Full Time • $38.00 to $43.00 / hr • 11/12/2026
Test Engineer - 2nd Shift Location: Windsor Locks, CT Job ID: #73423 Pay Range: $38-43 \n 12 month contract \n Description: \n The Test Engineer provides hands on technical support for equipment installation, testing, troubleshooting, maintenance, and field operations. This role performs verification and functional testing, diagnoses issues on site, supports system upgrades, and ensures equipment operates safely, efficiently, and in accordance with engineering and customer requirements. \n Primary Responsibilities: \n Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. \n Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. ResponsibilitiesESPO Corporation
Latham, NY • (40.6 miles) • Full Time • $125,000 to $150,000 / yr • 11/12/2026
Job Title: Mechanical Design Engineer - HVAC Location: Latham, NY Job Type and Duration: Hybrid, Direct-Hire Pay range: $125,000 - $150,000 About the Opportunity Our client is seeking a highly skilled Mechanical Design Engineer to serve as an in-house technical expert supporting the design and implementation of complex HVAC and mechanical systems for commercial, industrial, institutional, and mission-critical facilities. This role is ideal for an experienced engineer who enjoys solving challenging technical problems, leading mechanical system design efforts, and collaborating with multidisciplinary project teams. The successful candidate will have strong experience designing chilled water systems, developing construction documents and specifications, and providing technical leadership throBICRON ELECTRONICS
West Torrington, CT 06790 • (32.4 miles) • Full Time • $75,000 to $85,000 / yr • 11/12/2026
iNRCOREGroup is a leading, vertically integrated provider of highly engineered, high-reliability, and high-performance passive electronic components. We are known for manufacturing proprietary magnetics, capacitors, resistors, filters, and more. We serve mission-critical data and power applications in the Defense, Aerospace & Avionics, Space, Smart Grid, Medical, AI/Data center, and Hi-Rel industrial markets. iNRCORE Group currently has fourteen (14) manufacturing facilities across the globe with more than one thousand (1000+) employees – and growing! Our business entities include company names such as Bicron, Coast Magnetics, DYCO, Gowanda, iNRCORE, Passive Plus, RCD, Sentran, TTE, and Vanguard Electronics. Our organization has a world-class reputation for innovation, quality products andElement2 Group
Farmington, CT 06032 • (44.6 miles) • Full Time • $95,000 to $115,000 / yr • 11/12/2026
Quality Engineer\n Location: Farmington, CT \n Pay: $95,000–$115,000 per year \n Schedule: 1st Shift | Monday–Friday, 7:00 AM–3:30 PM \n Job Type: Full-Time, Direct Hire \nPosition Overview\n An established aerospace manufacturer in Farmington, CT is looking for a Quality Engineer to join its Quality team. This person will work closely with the Quality Manager, manufacturing, engineering, and inspection teams to maintain quality standards, address production issues, and improve overall processes. \n This is a hands-on role that combines product quality, problem-solving, documentation, and quality system responsibilities. The ideal candidate has experience in aerospace or precision manufacturing and understands industry quality requirements. \nResponsibilities\n \n Support daily quality opeOn Point Construction Services
Springfield, MA 01001 • (34.9 miles) • Full Time • $65,000 to $90,000 / yr • 11/11/2026
Job Description – Construction Support Services – Western Massachusetts This is a highly unique opportunity to be on the front line of the evolving construction planning and project controls industry, working on major contracts with a diversified client field of established construction firms. As our operations have grown we are looking for a Civil Engineer, Construction Manager or Information Technology Specialist with 1-5 years of engineering/construction experience to join our team. Experience working on construction projects and a bachelor’s degree in an Engineer field is a plus. This person will work with our senior level staff to provide construction project management support services to our clients on multiple heavy civil (bridge, highway, utility) and commercial construction projeCogent Talent Solutions
Bloomfield, CT • (40.3 miles) • Full Time • $105,000 to $120,000 / yr • 11/11/2026
\n The Mechanical Engineer is responsible for designing, developing, and improving mechanical systems, components, and products to support engineering and production operations. This role involves applying engineering principles, conducting analysis, and collaborating with cross-functional teams to ensure projects meet technical requirements, safety standards, and customer expectations. The Mechanical Engineer plays a key role in driving innovation, product quality, and efficiency improvements across the organization. The Mechanical Engineer reports directly to the Chief Technology Officer (CTO). This position may collaborate with Fabrication, Assembly, Maintenance, Quality, and Production teams.\n \n \n \n \n \n You must be a US Citizen or Green Card holder and live in the Hartford, CT arW3Global Inc.
Avon, CT • (40.1 miles) • Full Time • $50.00 to $55.00 / hr • 11/11/2026
We are working with Our Client to identify a skilled CNC Programmer responsible for developing and refining machining programs to support high-precision production. This role focuses on improving machining efficiency while maintaining strict quality standards. \n Key Responsibilities: \n \n \n Develop and modify CNC programs for milling and multi-axis equipment \n \n Analyze technical drawings and 3D models to determine machining strategy \n \n Select tooling, speeds, and feeds to optimize performance \n \n Test and validate new programs directly on machines \n \n Identify machining issues and implement process improvements \n \n Coordinate with engineering and shop floor teams to ensure production accuracy \n \n Maintain organized program files and version tracking \n \n Qualifications: \CBRE HV
Amherst Center, MA • (36.5 miles) • Full Time • 11/11/2026
Job Description About the Role: As a CBRE Mobile Engineer, you will be responsible for preventive maintenance and corrective repairs for buildings, industrial systems, vehicles, equipment, and grounds. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. What You’ll Do: Oversee maintenance and repairs to the mechanical, industrial, plumbing, structural, life safety, and control systems for the facility to keep facility and building systems up to applicable standards as assigned. Review assigned work orders, estimate time and materials needed to complete the repair and maintain inventory of adequate supplies and tools. Implement preventive maintenance programs to ensBarnes Group Inc.
East Granby, CT 06026 • (35.1 miles) • Full Time • 11/10/2026
The Quality Engineer role at East Granby, CRO is responsible for planning and executing actives related to the development, application, and maintenance of quality standards and activities for customer processes, materials, and products to assure that customer expectations are met or exceeded while maintaining while optimizing cost and operational performance. Core Responsibilities: Assists in formulating and maintaining quality assurance plans and objectives. Formulates and coordinates product quality standards and objectives with production procedures to obtain the most economically optimal product quality and reliability. Investigates and responds to customer complaints regarding product quality. Reviews RFQs, identifying special quality considerations. Reviews and makes recommendationsConnecticut Spring & Stamping
Farmington, CT 06032 • (44.6 miles) • Full Time • $80,000 to $110,000 / yr • 11/10/2026
Job Title Process & Estimating Engineer Job Number 17-3029.06 Department Coiling and Secondary Reports to Spring Manufacturing Manager Primary Position Objectives Develop & refine spring manufacturing processes and procedures in order to assure quality control and consistency in manufacturing. Responsible for contract review & assisting in cost estimating on new product. Position Responsibilities Estimating Provides technical information and training to production staff. Tests alternative techniques and methods; recommends changes in manufacturing processes and procedures, or equipment as necessary. Supervises installation of the most effective methods of manufacturing to keep company at competitive edge at all times in a global economy. Approves all Estimating Feedback Forms for operationFischer Technology Inc
Windsor, CT 06095 • (41 miles) • Full Time • 11/10/2026
Description: About us: Fischer Technology is a leading manufacturer of precision coating thickness measurement and material analysis instrumentation. For more than 70 years, we have earned a global reputation for delivering highly accurate and reliable measurement solutions. Our instruments are trusted by customers in the aerospace, automotive, electronics, medical device, durable goods, green energy, and general manufacturing industries. As part of the Helmut Fischer Group, we are committed to innovation, quality, and exceptional customer service. Our collaborative team works closely with customers to solve complex measurement challenges through advanced technology and application expertise. Position Overview Fischer Technology is seeking a motivated Field Sales Engineer to join our growiTGG Accounting
West Torrington, CT 06790 • (32.4 miles) • Full Time • $80,000 / yr • 11/10/2026
Assistant Project Manager Water & Wastewater Treatment Construction \n\n Location: Northwest Connecticut (Greater Hartford region) onsite, split between the office and active project sites \n\n Pay Rate: $80,000–$110,000 base salary, based on experience, plus an annual merit-based bonus \n\n Overview \n Our client is a self-performing general contractor specializing in water and wastewater treatment plant construction. Projects span heavy civil, industrial, and mechanical scopes, including process piping, mechanical systems, concrete, and controls, primarily for municipal owners. \n The team is experienced and low-turnover, with staff ranging from early-career professionals to industry veterans. Senior leadership is actively involved in training and developing newer team members. The envirSST Direct
Windsor, CT • (41 miles) • Full Time • $110,000 to $130,000 / yr • 11/10/2026
DIRECT HIRE: The NPI Manufacturing Engineer is responsible for developing, implementing, optimizing, and maintaining CNC manufacturing processes that support new product introductions (NPI). This role focuses on improving production efficiency, product quality, and cost-effectiveness while ensuring processes meet engineering specifications and customer requirements. Working closely with design engineers, quality teams, machinists, and setup personnel, the engineer provides technical support throughout the manufacturing process, from initial product development and process planning through production launch and continuous improvement. Location: Windsor, CT. (onsite position) Salary Range: $110K - $130K (depending on experience) Base Schedule: M - F, 6am - 2:30pm Benefits: Listed at the bottRBC Aircraft Products, Inc.
West Torrington, CT 06790 • (32.4 miles) • Full Time • 11/8/2026
The Manufacturing Engineer is responsible for the design of production tools and /or machines and for developing solutions to support the bearing manufacturing process. A major responsibility is to improve existing manufacturing processes by increasing machine capability while at the same time maintaining quality standards. This individual will also have responsibility for floor layouts as well as costing and obtaining quotes. The incumbent is responsible for supporting new programs by developing new processes, designing tooling and machinery and developing production controls. Additionally, the Precision Manufacturing Engineer sets up new equipment, ensures satisfactory operation of the new equipment and teaches others to use it properly. Principle Responsibilities Develops and improves pKinetic Engine Systems
Southwick, MA 01077 • (28.5 miles) • Full Time • $42.00 to $48.00 / hr • 11/7/2026
Job Position Summary: You will be responsible for designing and creating economical custom manufacturing fixtures. Reviews product design, processes and build requirements to determine tooling concepts, design options, and testing plans. Also, responsible for managing the design and the creation process for fixtures as required. I.E. Machining, Pressure testing, Assembly, and Inspection holding fixtures, in accordance with customer blueprints, 3D models, and internal operation sheets You must have: A high School Diploma orGED required Associate degree or higher in related field or relative time in manufacturing Typically, 3 to 8+ years of mechanical or tooling design experience within aerospace, or high-precision manufacturing A thorough understanding of Machine capabilities and techniquesAero Gear
Windsor, CT 06095 • (41 miles) • Full Time • $70,000 to $100,000 / yr • 11/7/2026
Quality Engineer The Company Aero Gear is a global supplier of aerospace gears and gearbox assemblies to top OEM's such as Pratt& Whitney, GE, AVIO, Collins, Rolls Royce and Sikorsky. The company was founded in 1982 and has grown over the years through key capital investments, technology and the professional development of its employees. Aero Gear has a team-based culture with a focus on excellence and continuous improvement. The outlook for the company is strong as it continues to set higher goals for sustained success together. Position Summary The primary purpose of this position is to plan and conduct activities concerned with the quality control and quality assurance of industrial processes, materials and products. Work with customers to ensure timely submittal and approval of flow doKBE Building Corp
Farmington, CT 06032 • (44.6 miles) • Full Time • 11/7/2026
KBE Building Corporation: Relationships Are Everything! Join our team today!! \n\n KBE’s relationship focus means that you can count on us to do the right thing at all times and work in the best interests of your project. We will be proactive and open in all of our communications and interactions with all members of your project team. Our clients, design partners, and trade contractors say they trust KBE to do the right thing because we build relationships first, buildings second. \n\n CURRENT OPPORTUNITY: \n Timeframe : End of May 2027 to Mid August 2027 \n\n The Project Engineer will assist the Project Manager with the day-to-day construction, technical and administrative aspects of assigned construction projects. Primarily in the office, assignments may be generated from several in-housBOLD
Springfield, MA 01103 • (35.2 miles) • Full Time • $50.00 to $55.00 / day • 11/7/2026
Job Description: \n Strong Data Testing experience including data cleansing, comparison, validation, reconciliation, and business-rule testing. \n Expert-level SQL skills with strong hands-on experience writing complex queries for data validation. \n Hands-on AWS experience with AWS Glue, Lambda, and S3. \n Some hands-on experience with Playwright automation. \n Good understanding of ETL testing and data pipelines; moderate experience is acceptable. \n Candidates must be local to Fort Mill, SC or Charlotte, NC, or willing to work onsite in the client office at least 2 weeks per month.Fuss & O'Neill
Springfield, MA • (37.4 miles) • Full Time • $100,000 to $120,000 / yr • 11/6/2026
Description Creativity. Innovation. A desire to effect positive change. That’s what it takes to work at Fuss & O’Neill – because that’s what we do for the communities in which we work: we create, innovate, and design long-lasting improvements that improve quality of life. Quality of life is also important on the job, so we’ve prioritized work-life balance by offering flexible/remote work opportunities, part-time benefits, and generous PTO. We believe that each day is an opportunity to support one another, to support our clients, and to support our communities. If you feel the same, then you’ve found your future. We are seeking a Senior Geotechnical Engineer to join our growing team and play a key role in delivering high-quality geotechnical engineering services across a diverse portfolio oInsight Global
Springfield, MA • (37.4 miles) • Full Time • $26.00 to $29.00 / hr • 11/6/2026
Skillset: Tier1FieldServiceTech Location: On-site,inSpringfieldandexpectedtotravelwithin45minradius. Duration: 6-monthc2h PayRate: $26-$29 Schedule: M-F,8am-4:30pm StartDate: 12/14 RoleDescription Our IT Onsite Field Service Technicians provide assigned shift and on-call coverage, supporting and maintaining computer hardware, software, printers, phones, Wi-Fi, networks, and other equipment at customer locations. This role is primarily onsite, with occasional remote work, and provides Tier II IT technical support. Youwillbringthehelpdesktoourclient’sdoorwhileassistingandensuringourclientsreceivetheultimateincustomerservice. RequiredQualifications: CompTIAA+certificationor1-yearequivalenthands-oncomputerexperience Office365SystemSupport ProficiencyworkinginActiveDirectory(accountcreation,groKaman Air Vehicles
Bloomfield, CT 06002 • (40.4 miles) • Full Time • $90,000 to $120,000 / yr • 11/6/2026
Kaman Air Vehicles is seeking an experienced and motivated Mechanical Engineer III to join our team in Bloomfield, CT. In this role, you will support the design, analysis, development, and validation of engineering systems while collaborating with cross-functional teams, suppliers, subcontractors, and customers. The ideal candidate will bring strong technical expertise, excellent problem-solving skills, and the ability to manage engineering activities while supporting project goals and objectives. Essential Duties and Responsibilities Design and analysis of assigned systems. Prepare and review engineering documentation and statements of work (SOW). Evaluate and accept engineering documentation and participate in the validation and test of requirements and design. Handle classified documentPDS Tech Commercial
Easthampton, MA • (28.4 miles) • Full Time • 11/5/2026
Senior Electrical Engineer | Lead Advanced Hardware Development & Test System Innovation\n \n \n Location: Easthampton, MA | Onsite \n \n Schedule: Monday-Friday | 8:00 AM-5:00 PM \n \n Pay Rate: $68.41/hour \n Drive Complex Engineering Projects from Concept to Validation\n PDS Tech Commercial is seeking a Senior Electrical Engineer to support a Fortune 500 industry leader in industrial automation, software, and engineering services. This is an opportunity to take ownership of sophisticated hardware development projects that power advanced test systems used in high-performance engineering environments. \n In this role, you will lead electrical design initiatives from initial concept through testing, validation, and release while collaborating with multidisciplinary engineering teams. If yoStargasso Group Inc
Holyoke, MA • (30.5 miles) • Full Time • 11/5/2026
About the Role We are hiring a Controls & Automation Engineer to own, program, commission, and operate the NOA-20 pilot anaerobic digester system. This is not a support role. You are responsible for taking an uncommissioned pilot system and delivering stable, continuously operating infrastructure . You will own the controls stack end-to-endfrom first power-on through live biological operationand prepare the system for replication at municipal scale. If you are looking to design in theory and hand off execution, this is not the role. If you want system ownership and real-world impact, read on. General Purpose of Job (Non-Negotiable) The Controls & Automation Engineer is responsible for programming, commissioning, and operating the NOA-20 pilot anaerobic digester, including all control logicUFP Technologies
Chicopee, MA 01020 • (34.9 miles) • Full Time • $140,000 to $155,000 / yr • 11/4/2026
About UFP MedTech: UFP Technologies is a designer and custom manufacturer of comprehensive solutions for medical devices, sterile packaging, and other highly engineered custom products. UFP is an important link in the medical device supply chain and a valued outsource partner to most of the top medical device manufacturers in the world. The Company’s single-use and single-patient devices and components are used in a wide range of medical devices and packaging for minimally invasive surgery, infection prevention, wound care, wearables, orthopedic soft goods, and orthopedic implants. UFP Technologies, Inc. offers a competitive benefits package, including but not limited to: Medical, Dental, Vision, Life, Disability Insurance 401K with a matching contribution Paid time off, Paid holidays, EmpMetropolis Technologies
Windsor Locks, CT 06096 • (39 miles) • Full Time • $24.00 to $24.50 / hr • 11/4/2026
Overview \n SP+, a Metropolis company, is an artificial intelligence company for the real world. We use computer vision to enable checkout-free parking experiences. So there’s no fumbling with tickets, machines, apps, or credit cards. You just “drive in and drive out.” \n\n We are the largest parking network in America, with over 23,000 employees powering mobility at over 4,000 locations across North America and Europe. \n\n Today, we are reinventing parking. Because it’s important, it's everywhere and impacts everyone. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working, and playing remarkable - giving us back our most valuable asset, time. \n \n Responsibilities \n Basic Function – Assist in the day-to-day management of aSkylimit Systems
North Granby, CT • (27.8 miles) • Full Time • $105,000 to $115,000 / yr • 11/4/2026
About the Role \n We are seeking a Development Engineer to lead the technical execution of aerospace and defense product development projects from concept through qualification and production. This role combines hands-on engineering, technical project leadership, customer collaboration, and cross-functional coordination. The Development Engineer will own technical requirements, design activities, risk management, technical documentation, and project execution while working closely with customers, suppliers, manufacturing, and internal engineering teams. \n\n Key Responsibilities: \n \n Lead technical execution of projects from concept through development, qualification, and production \n Develop and maintain technical data packages, engineering documentation, 3D models, and 2D drawings \nBachmann Chemical And Engineering
West Torrington, CT 06790 • (32.4 miles) • Full Time • 11/3/2026
We are only accepting applications through verified recruitment websites listing our job postings (i.e. LinkedIn, Workable, Indeed, etc). Dymax will only contact potential candidates from email addresses in @dymax.com. About Us Dymax, part of the Bachmann Chemical & Engineering family of brands is based out of Torrington, Connecticut. Dymax is globally recognized as a pioneer in the development of light-curable adhesives and curing equipment. Today, our expansive portfolio of innovative adhesives, coatings, and maskants are supported by dispense solutions and cutting-edge UV and LED light-curing equipment. Unlike our competitors who supplying standard products, Dymax focuses on the customer experience by tailoring solutions that help customers lower costs, reduce their carbon footprint, imRotating Machinery Svcs Inc
Chicopee, MA 01022 • (35.7 miles) • Full Time • $66,000 to $85,000 / yr • 11/3/2026
THE ROLE: The CNC Programmer, Airfoil Department is responsible for developing, proving out, and continuously improving CNC programs for 3, 4, and 5-axis milling machines used to produce complex turbine airfoil components. This role works closely with Manufacturing Engineering, Quality, and shop floor personnel to ensure programs produce parts efficiently, safely, and to specification, and reports directly to the General Manager. RESPONSIBILITIES & ESSENTIAL FUNCTIONS: Develop, edit, and optimize CNC programs using CAM software for 3, 4, and 5-axis milling machines producing turbine airfoil components. Interpret engineering drawings, 3D CAD models, and GD&T to create accurate, efficient machining programs for complex airfoil geometries. Select appropriate cutting tools, feeds and speeds, wAttalon, Inc.
Bloomfield, CT 06002 • (40.4 miles) • Full Time • $92,000 to $124,000 / yr • 11/3/2026
Attalon / Location Overview Attalon Inc. is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. At Attalon inc. in Bloomfield, CT we foster a culture of innovation and collaboration. Our teams work in a state-of-the-art facility with advanced cleanrooms, precision manufacturing, and cutting-edge R&D labs, enabling us to deliver world-class optical solutions. We value continuKamis
Torrington, CT • (32.6 miles) • Full Time • 11/2/2026
Design, develop, implement and verify processes for new programs including equipment, fixtures, tooling, gaging and quality plan. Continually reduce costs by improving productivity and reducing internal quality costs using lean/six sigma tools. Use structured problem solving approach for internal and external production and quality, delivery, cost and growth Design, develop, test, implement and validate processes for new programs within budget and within program timing. Work with Program Managers to ensure fixtures, tooling, molded parts, purchased parts, prints, process flow, PFMEA, control plan, work instructions, inspection checklists, training, time studies, production rates, production sheet and other requirements are created and coordinated to hit prototype and production launch dateFusco Personnel Inc.
Latham, NY 12110 • (42 miles) • Full Time • $185,000 to $225,000 / yr • 11/2/2026
We are seeking a senior-level Enterprise Network Engineer to join our growing IT services team, reporting to the Vice President of Engineering. You'll bring a long career in networking 15 or more years overall, with at least a decade spent designing and rolling out networks at enterprise scale along with the communication skills to explain complex ideas to anyone, from engineers to executives. Beyond leading demanding design and deployment projects, you'll step into customer conversations early, helping shape solutions before the deal is signed and advising leadership teams on where their network should go next. The ideal candidate is fluent in advanced networking, enterprise security, and modern architecture practices.FORGE AND APEX CONSTRUCTION LLC
Latham, NY • (40.6 miles) • Full Time • $20.00 to $40.00 / hr • 11/1/2026
We are seeking a motivated Field Technician with hands-on experience in demolition, general construction, and water mitigation. This is a hands-on field role with a clear career pathway: for the right candidate who demonstrates strong communication, reliability, and project management skills, this position is designed to transition into a Site Supervisor role. Key Responsibilities Field Operations: Perform structural demolition, water damage mitigation, flood cleanup, and general job-site rebuilding/construction. Tool & Inventory Management: Properly pack away, maintain, and return all tools and Packout equipment to the site supervisor daily. Timekeeping: Utilize the ADP Mobile app daily to clock in/out for shifts and lunch breaks. Safety & Compliance: Adhere strictly to OSHA standards, weMondo
Windsor, CT 06006 • (42.9 miles) • Full Time • 11/1/2026
Job Title: Principal Software Engineer / Lead (.NET) Location-Type: Hybrid - Windsor, CT (4 days onsite per week) Start Date: To be confirmed Duration: Contract-to-Hire Compensation Range: $52/hr - $75/hr Benefits: Eligible for Health, Dental, Vision, and 401K Visa Sponsorship: Not eligible for visa sponsorship Job Description: This is a senior individual contributor and technical leadership role responsible for setting architectural direction, driving platform modernization, and raising engineering capability across multiple teams and product lines for the client's enterprise application landscape. Job Summary Lead architectural governance, design reviews, and strategic technology decisions across 4-6 engineering teams spanning multiple product lines. Design scalable, resilient enterpriseKinsley Group
East Granby, CT 06026 • (35.1 miles) • Full Time • $130,000 to $180,000 / yr • 10/31/2026
The Field Engineer is a highly technical, field-based role responsible for supporting the installation, commissioning, startup, testing, and operational performance of industrial standby and prime power generation systems. This role plays a critical part in ensuring generator systems, paralleling switchgear, automatic transfer switches (ATS), and control systems are installed, commissioned, and operating safely, reliably, and in accordance with design specifications. The Field Engineer works closely with Project Managers, Field Service Technicians, electrical contractors, and customers to deliver high-quality power system installations across Kinsley’s Northeast service territory. Installation Review & Field Execution: Review electrical one-lines, wiring diagrams, control schematics, and sEbm-papst Inc.
Farmington, CT 06034-2835 • (44.2 miles) • Full Time • $100,000 to $120,000 / yr • 10/31/2026
ebm-papst, Inc. Job Description Job Title: Senior Qualification Engineer Department: Research & Development ** This is not an IT or software role ** Summary: At ebm-papst Inc., a leader in innovative fans, motors, and engineering solutions, the Senior Qualification Engineer is responsible for developing, coordinating, and controlling the system-level testing and qualification process for product development projects. This role plans, monitors, and evaluates qualification activities across multiple test domains to ensure product quality & reliability. In addition to supporting the broader project portfolio, this role will coordinate qualification activities for selected strategic customers, serving as a key technical interface between customers, R&D, Engineering, and test resources. The SenMAS Building & Bridge, Inc
Chicopee, MA 01013 • (33.1 miles) • Full Time • $70,000 to $90,000 / yr • 10/30/2026
Western Massachusetts Field Engineer: \n Join MAS Building & Bridge as a Field Engineer in our Heavy Civil Construction Division. Play a vital role in project planning and construction, ensuring projects are delivered on time, on budget, and in accordance with the Plans and Specifications. This position offers a dynamic blend of office and field tasks, providing valuable hands-on experience in diverse Heavy Civil projects including bridge, rail, marine, utility and roadway construction. \n\n Responsibilities: \n \n Daily interaction with Project Managers, Site Supervisors, and Craft personnel to support planning, scheduling, material procurement, and subcontractor management. \n Review of Plans and Specifications to ensure compliance with all contract requirements. \n Site inspections forIntact Services USA LLC
Farmington, CT 06032 • (44.6 miles) • Full Time • 10/30/2026
Our employees are at the heart of what we do: helping people, businesses and society prosper in good times and be resilient in bad times. When you join our team, you are bringing this purpose to life alongside a passionate community. Feel empowered to learn and grow while being valued for who you are. At Intact, we commit to supporting you in reaching your goals with tools, opportunities, and flexibility. It’s our promise to you. Who we are At Intact Insurance Specialty Solutions, we are experts at what we do in protecting what makes businesses unique. Our deep understanding of the specialty insurance market is the foundation for our customized solutions, backed by targeted risk control and claims services. Our employees are passionate about providing insurance coverage that’s aligned to oFelix Global
Springfield, MA • (37.4 miles) • Full Time • $60,000 to $110,000 / yr • 10/29/2026
\n About The Company: \n Lyndex-Nikken is a global organization that manufactures and supplies precision toolholders, rotary tables, and other accessories for machining. For 45 years, our products have been relied upon in industries including automotive, aerospace, energy, medical devices, and more. \n The Lyndex-Nikken brand represents high quality and accuracy, working seamlessly to improve the efficiency and precision of CNC machining processes. Our workplace culture is one of excellence and dedication to our team’s personal and professional development. \n Lyndex-Nikken is deeply confident in our product value and with 20 consecutive years of profitability, we remain committed to significant organizational growth. We are expanding our North American sales team and currently have an opeEmerge
Winsted, CT 06098 • (26.8 miles) • Full Time • $105,000 to $125,000 / yr • 10/28/2026
Emerge is recruiting qualified candidates for a Senior Process Engineer job in Winsted, CT with an growing aerospace manufacturer known for innovation. This is a direct-hire opportunity to play a critical role in optimizing CNC Machining processes. As a Process Engineer, you will be responsible for the development and implementation of product into the manufacturing operation to meet production requirements and quoted costs. This position reports to the Engineering Manager. Our client offers the following: \n\n \n Salary: $105,000 - $125,000 (based on experience) \n Bonus: Targeted at 5% but can be higher! \n Benefits: starts day one! Excellent health insurance plans,401(k) plan with annual 3% company deposit plus a 6% match. Excellent career growth in an established, growing company. \n \Macpower Digital Assets Edge Private Limited
Northampton, MA • (28.2 miles) • Full Time • $150,000 to $250,000 / yr • 10/28/2026
\n Position Overview: The Business Unit Chief Engineer provides technical leadership and strategic direction for a portfolio of Maritime Imaging Systems (MIS), including Submarine, Surface Ship, and Unmanned Underwater Vehicle (UxV) technologies. This role is responsible for the technical, cost, and schedule performance of a 100-person cross-functional engineering team. \n Technical & Operational Responsibilities: \n \n Oversee the entire product development lifecycle from initial proposal and definition through production transition and long-term sustainment. \n Direct a group of 3 6 Program Chief Engineers to ensure successful project execution across the business portfolio. \n Accountable for the technical integrity and financial performance of both customer-funded projects and InternalInfowave Systems, Inc
Holyoke, MA 01040 • (30.5 miles) • Full Time • 10/28/2026
Title : Senior Windows Platform & Automation Engineer \nLocation: Holyoke, MA (Hybrid) \n \n Required skills: \n \n Candidate must have hands-on experience in engineering, securing, and supporting enterprise Windows Server environments, including business-critical production systems. \n Demonstrated hands-on experience with Windows Server, Active Directory, Group Policy, and PowerShell, as well as patch management and vulnerability remediation. \n Demonstrated experience supporting Windows Server across physical infrastructure, VMware and Nutanix virtual environments, and AWS- and Azure-hosted environments. \n Demonstrated ability to develop, maintain, and continuously improve operational processes, technical standards, security baselines, documentation, and runbooks. \n Demonstrated abiliAmpcus Incorporated
Holyoke, MA 01040 • (30.5 miles) • Full Time • $55.00 to $65.00 / hr • 10/28/2026
Senior Windows Platform & Automation Engineer \n \n\n Summary \nOur clientis soliciting resumes for a Senior Windows Platform & Automation Engineer Consultant to support the Infrastructure Services Department. \n\n Candidate Requirements \n\n \n A minimum of seven years of hands-on experience in engineering, securing, and supporting enterprise Windows Server environments, including business-critical production systems. \n Demonstrated hands-on experience with Windows Server, Active Directory, Group Policy, and PowerShell, as well as patch management and vulnerability remediation. \n Demonstrated experience supporting Windows Server across physical infrastructure, VMware and Nutanix virtual environments, and AWS- and Azure-hosted environments. \n Demonstrated ability to develop, maintain, aNotch Mechanical
Chicopee, MA 01013 • (33.1 miles) • Full Time • $135,000 to $150,000 / yr • 10/28/2026
Notch Mechanical Constructors is looking for an experienced Mechanical Engineer - Energy/HVAC/Thermal Fluid Focus to join our growing team! This specific department is team oriented and works together extremely well. They enjoy our core values of "Working as Team" "Meeting the Challenge" and so on! If you have a wealth of experience as a Field Project Engineer we encourage you to apply! Position Highlights: Provide engineering design and layout for a variety of mechanical piping systems, including building mechanical systems (HVAC, plumbing, etc.) and plant utility systems (steam, chilled water, cooling water, compressed air, etc.). Provide technical direction and support in a variety of engineering, technical, estimating & cost activities. Provide technical engineering information to engiMarchon Partners
Springfield, MA 01104 • (35.6 miles) • Full Time • 10/28/2026
Senior LNG/Gas Plant Engineer (Mechanical/Process) . \n Hopkinton, MA - 100% onsite \n*Occasional travel to New England Plant sites \n12-month contract - strong potential to extend or convert \n$47-59/hour W2 + depending on experience \n \n Must have experience on an engineering, maintenance, technology or construction project team supporting Client, power, oil or gas plant construction. \n \n Quick summary: Senior Engineer supporting LNG/gas plant operations and capital projects , with responsibilities spanning engineering, project management, technical documentation, procedures, maintenance, and project controls. The role requires an 8+ year engineering background , preferably in mechanical, chemical, process, or petroleum engineering, with strong knowledge of cryogenic processes, pipingTekfortune Inc.
Windsor Locks, CT • (39.1 miles) • Full Time • 10/28/2026
Tekfortune is a fast-growing consulting firm specialized in permanent, contract & project-based staffing services for world s leading organizations in a broad range of industries. In this quickly changing economic landscape, virtual recruiting and remote work are critical for the future of work. To support the active project demands and skills gaps, our staffing experts can help you find the best job for you. \n \n \n Job Title: Software Engineer \n Location: Windsor Locks, Connecticut _Onsite Only \n \n Mandatory Skill: \n Software Engineer, LabView experience, Development of Test Rig Software, modernize aged equipment, includes both Hardware/Software upgrades of Test Equipment, Test Automation, Gage Calibration process and introduction to industry 4.0 technologies \n \n Job Description:Zobility
Windsor Locks, CT 06096-1000 • (39.1 miles) • Full Time • 10/28/2026
Job Description: \n\n \n The Mechanical Manufacturing Engineer will contribute to the production of highly sophisticated assemblies for Space and Sea applications, including heat exchangers, pumps, fans, and pressurized accumulators. \n This role involves driving innovation, ensuring manufacturability, and applying advanced engineering solutions to support life support and thermal control systems. \n \n Responsibilities: \n\n \n Develop and implement mechanical manufacturing methods for hardware, ensuring their readiness and alignment with production goals. \n Author comprehensive manufacturing assembly documentation and design conceptual tooling to assist in high-quality hardware assembly used in Life support and Thermal control applications. \n Provide technical expertise to internal teaTechDigital Corporation
Bloomfield, CT • (40.3 miles) • Full Time • 10/28/2026
Job Summary: \n \n1. Build and ship AI agents and automation harnesses as a core deliverable not a side experiment using tool use/function calling, multi-turn context management, and agentic design patterns (MCP, LangChain-style frameworks) \n2. Use Claude, Cursor, and Codex as your primary development environment daily build with AI, not around it, across every layer you touch \n3. Evaluate and correct non-deterministic model output as a first-class engineering discipline know what the AI wrote, where you overrode or discarded it, and what would have shipped broken if trusted blindly \n4. Take a problem from rough idea to deployed, working software with minimal handoffs writing code, shaping UX, and wiring data pipelines yourself, accelerated by AI tooling throughout \n5. Design agent skiKatalyst Healthcares & Life Sciences
Bloomfield, CT 06002 • (40.4 miles) • Full Time • 10/28/2026
Position Summary: \nWe are seeking an experienced CMM Programmer to support precision aerospace manufacturing and inspection operations in Connecticut. The candidate must have strong hands-on experience developing, modifying, optimizing, and troubleshooting CMM programs using PC-DMIS.This is a CMM programming and troubleshooting role , not primarily a CMM operator position. \n Key Responsibilities: \n \n Develop CMM programs from scratch using PC-DMIS. \n Create, modify, debug, validate, and optimize existing CMM inspection programs. \n Develop offline and online PC-DMIS programs using engineering drawings and CAD models. \n Troubleshoot programs, measurement routines, probe configurations, setups, fixtures, and inspection-result errors. \n Develop inspection strategies for complex, tight-Conexess Group, LLC
Bloomfield, CT 06002 • (40.4 miles) • Full Time • 10/28/2026
Conexess Group is aiding a large healthcare client in their search for an EDI Engineer in a hybrid capacity. This is a long-term contract opportunity with a competitive compensation package. \n \n **Location preferred is either in Missoula, MT or Plano, TX or remote but available to work in Mountain Timezone with the rest of the team.** \n \nWe are seeking an EDI Specialist Engineer to design, develop, enhance, and support EDI applications, integrations, and data exchange processes. This role will work closely with business stakeholders and engineering teams to develop reliable, scalable solutions, improve data integrity, and automate manual processes. \n Responsibilities \n \n Participate actively in story grooming, estimation, sprint planning, PI planning, daily standups, sprint demos, aSavATree LLC
Bloomfield, CT 06002 • (40.4 miles) • Full Time • 10/27/2026
Job Title: Lead Technician & Field Supervisor Location: Bloomfield, CT Job Type: Full-Time Salary: $32-$35/hour Job Overview At Deer Guys, a SavATree company , we’re more than just a workplacewe’re a community dedicated to wildlife management and environmental stewardship. We are seeking a highly motivated and hands-on individual to step into the role of Lead Technician & Field Supervisor . This is an independent, field-based role where you will play a pivotal part in learning the business from the ground up while directly contributing to its growth. As you gain expertise and drive expansion, there will be opportunities to build and lead a team in the future . In the meantime, you’ll have the full support of our management team as you take ownership of service delivery, client relations, aMB Aerospace East Granby
East Granby, CT 06026 • (35.1 miles) • Full Time • 10/25/2026
Barnes Aerospace, East Granby OEM has an exciting opportunity for a Manufacturing Engineer, who will be responsible for processing and creating 3D models of component assemblies used in jet engine parts. The Manufacturing Engineer will use NX CAD and SolidWorks software to create 3D solid models and associated operation sheets. The Engineer will determine the tools and specifications needed in order to achieve manufacturing goals according to customer requirements. The Engineer must be comfortable in a manufacturing setting and interacting with shop personnel when developing processes. Core Responsibilities: Create 3D models of the assembly and all components in NX and or SolidWorks Create operation sheets / work instructions from 3D model in NX and or SolidWorks Oversee NX standards and cNational Experienced Workforce Solutions
Amherst, MA • (37 miles) • Full Time • $60.00 / hr • 10/25/2026
Civil Engineer ID: AMA1-006 Location: Amherst Program: ACE Wage/Hr: $60.00 Hours/Week: 16 Minimum Age: 55 Disclaimer: This is not a federal position. This role is offered through a partnership agreement and does not constitute an NRCS hiring action. This position is a non-federal role funded through an existing agreement between NRCS and NEW Solutions. The enrollee will provide direct support to farmers and landowners, enabling the implementation of conservation practices on the ground. This role contributes to NRCS's mission by enhancing capacity in field offices and ensuring timely assistance to producers. It is designed to free up NRCS staff for emergency and high-priority responses, not to replace federal staff. This role helps ensure continued progress on conservation planning, practiLEE TOOL CO INC
Ludlow, MA • (40 miles) • Full Time • $28.00 to $38.00 / hr • 10/25/2026
Imagine always having the latest version of Mastercam, creating programs for newer machines, not getting bogged down by corporate red tape, being able to walk right out on the floor to communicate with the machinists, and having major input reporting directly to the owner of the company! If you have CNC programming experience, you don’t want to miss this opportunity for more recognition, visibility, and ownership in your career! Lee Tool Company, Inc. is searching for a 5-Axis CNC Programmer in the Ludlow, MA area. This is a critical role responsible for complex machining to create close tolerance, aerospace components. If you have 5+ years of CNC programming experience in Mastercam and experience with metal machining in a production-manufacturing environment, they want to hear from you! SWGPW Industrial Turbine Services LLC
Bloomfield, CT 06002 • (40.4 miles) • Full Time • $80,000 to $100,000 / yr • 10/24/2026
WGPW Industrial Turbine Services Product Engineer Job Description Job Title: Engineer Department: Engineering Reports To: Senior Director of Engineering FLSA Status: Salary Exempt Position Status: Indirect Work Hours: 7:00AM – 3:30PM SUMMARY The individual is responsible for the design and oversight of new manufacturing processes required for gas turbine engine component repair. They will support Engineering efforts in technology and hardware development for enhancing product quality and life cycle. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes, but is not limited to, the following essential duties and responsibilities. Other relevant duties will be assigned on an as-needed basis. Create detailed instructions for inspection, repair and assembly of gas turbine engines and poweSanders Industries Holdings
Bloomfield, CT 06002 • (40.4 miles) • Full Time • $72,719 to $121,198 / yr • 10/24/2026
Kamatics is seeking a Quality Engineer responsible for supporting manufacturing and quality initiatives through process monitoring, root cause investigation, corrective actions, and continuous improvement activities. This role will define methods, equipment, and gauging necessary to measure key process parameters and customer requirements while utilizing statistical tools and data analysis techniques to improve quality, reduce variation, and minimize waste. The Quality Engineer will work cross-functionally with Manufacturing Engineering, Operations, and Quality teams to investigate non-conformances, implement corrective actions, and improve overall process effectiveness. This position requires strong analytical skills, attention to detail, and the ability to effectively communicate and colINFOSYS NOVA HOLDINGS LLC
Windsor, CT 06095 • (41 miles) • Full Time • 10/24/2026
What are your contributions to the team? · Act as a systems engineer and carry out pneumatics discipline activities · Assure integration and interface management of assigned systems and coordinate with internal groups & suppliers. · Define pneumatic system architecture, prepare specifications and requirements, conduct functional modeling and trade studies. · Ensure engineering requirements management, validation and verification · Manage suppliers from an engineering project and engineering technical perspective · Review and approve engineering design documents such as vendor drawings, test procedures, acceptance test procedures, qualification reports and certification documents · Document technical engineering analysis, ground, and flight test results · Prepare engineering technical reporWeston & Sampson Engineers Inc
Rhinebeck, NY 12572 • (42.1 miles) • Full Time • $85,000 to $110,000 / yr • 10/24/2026
Weston & Sampson is seeking a motivated and driven Project Engineer with 4-8 years of experience to perform highly skilled engineering and design work in our Massachusetts, New Hampshire, Connecticut or New York offices to support renewable energy projects throughout the Country. Our growing Energy Practice seeks thoughtful and innovative individuals who truly want to make a difference enhancing, protecting, and sustaining the natural and built environment to improve the quality of life. This position will support the permitting, design and construction phases of renewable energy development projects. What you’ll do: Perform site civil, land development, stormwater, utility designs, and specifications to support solar or other renewable energy development projects including construction obHRP Associates Inc
Farmington, CT 06032 • (44.6 miles) • Full Time • $90,000 to $150,000 / yr • 10/24/2026
HRP Associates, Inc. is seeking highly skilled and motivated Remedial Environmental Engineers with 10+ years of experience to join one of our offices in either Farmington, CT, Clifton Park, NY, Buffalo, NY, Plymouth, MA, or Greenville, SC. Successful candidates will be responsible for designing and implementing remedial solutions for soil, groundwater, and soil vapor contamination projects. This role requires a strong technical background, excellent problem-solving skills, and the ability to work collaboratively with multidisciplinary teams. If this sounds like the career move you have been waiting to make and if you meet our qualifications, we want to talk with you! Responsibilities: Develop and design remedial strategies for soil, groundwater, and soil vapor contamination Conduct site asFlex Tek
Springfield, MA 01104 • (35.6 miles) • Full Time • 10/23/2026
Company Description Titeflex/US Hose is a global leader in creating and adapting fluid and gas management products and quality programs, Titeflex expertise can be traced to its aerospace roots at the dawning of the space age. We provided solutions and service for demanding fluid and gas transfer requirements, whether the media be corrosive, caustic or combustible, under extreme pressure, temperature and flexing conditions. Primary markets include aerospace, chemical, petro-chemical, pulp and paper, petroleum equipment, heavy equipment, compressed gas, automotive, refrigeration, transportation, and dozens of other niche markets. The company has a long history of expertise in PTFE extrusion and wire braid reinforcement, and composite hose as the new integration of flexible metal hose with thIntegrated Illumination System
Morris, CT 06763 • (42.2 miles) • Full Time • $30.00 to $48.00 / hr • 10/23/2026
About the Opportunity i2Systems, an innovative LED lighting manufacturer specializing in advanced lighting solutions, is seeking talented and motivated engineering professionals to join our growing team. We are looking for individuals who are passionate about engineering, problem-solving, innovation, and continuous improvement. Whether you're a recent engineering graduate or an experienced professional, we welcome candidates interested in applying their technical knowledge in a hands-on, collaborative manufacturing environment. Key Responsibilities Engineering & Technical Support: Support the development, evaluation, and optimization of manufacturing processes, equipment, and production systems. Process Design & Improvement: Identify opportunities to improve manufacturing efficiency, produStarhired
Broad Brook, CT 06016 • (44.4 miles) • Full Time • $65,000 to $100,000 / yr • 10/22/2026
\n \n We are looking for a Electrical-Mechanical Engineer. You will design and develop an industry leading products. We’re looking for someone with electrical, mechanical, pneumatic, automation, AI experience for this engineering role. This is a full-time direct hire position. \n What you will need as an Electro-Mechanical Engineer: \n \n Design Electrical and Mechanical systems \n Develop PLC and HMI programs for control panels \n Mitsubishi PLC a plus \n Develop prototypes \n Troubleshoot any issues with electrical and mechanical designs and machines \n Electrical and mechanical systems compliance \n AI integration and product automation \n You need SCCR and UL 508/A experience \n Other tasks as assigned. \n \n What you will get as an Electro-Mechanical Engineer: \n \n Competitive Pay \nPacAero
Springfield, MA 01001 • (34.9 miles) • Full Time • $75,000 to $110,000 / yr • 10/21/2026
Description: Ready to help build parts that matter? PacAero is looking for an experienced Quality Engineer to join our team in Agawam, MA. In this role, you’ll work directly with Manufacturing, Engineering, and Quality to ensure our products and processes meet the high standards required for critical aerospace and other high-reliability applications. We’re looking for someone who brings hands-on quality engineering experience in a precision manufacturing environment and understands quality beyond the paperwork someone who can get out on the floor, investigate what happened, lead root cause and corrective action efforts, and work with the team to put sustainable solutions in place. Why Join PacAero? Annual bonus opportunity 12 paid company holidays including your birthday! Medical, dental,DRT Holdings, LLC
Winsted, CT 06098 • (26.8 miles) • Full Time • 10/21/2026
Location | Winsted, CT Salary |Competitive Pay + Bonus + Day 1 Benefits & 401K Company Match Shift(s) Available:Monday-Friday | 7:30 AM - 4:30 PM Aerospace Manufacturing | Mastercam | Siemens NX | CNC Programming DRT Aerospace is seeking a Sr. Machinist Programmer to support the production of mission-critical aerospace components. This highly visible role combines CNC programming, manufacturing engineering, process development, and shop-floor support to drive operational excellence, quality, and on-time delivery. If you're an experienced CNC Programmer, Manufacturing Engineer, or Process Engineer who enjoys solving complex machining challenges and partnering directly with production teams, this opportunity offers a hands-on environment where your expertise will make an immediate impact. WhThe Robert E. Morris
Springfield, MA 01103 • (35.2 miles) • Full Time • 10/21/2026
Join a USA Today Top Workplace! \n Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. \n The Robert E. Morris Company is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. \n Our customer base is located in the New England states plus northern New Jersey and eastern New York, including the New York metropolitan area and Long Island. Our mission is to help manufacturers from all industry sectorsAquinas Consulting
Bloomfield, CT 06002 • (40.4 miles) • Full Time • 10/21/2026
Aquinas Consulting is currently looking to fill an Electrical Engineering Technician job in Bloomfield, CT. This CONTRACT hire job is available with one of our key customers in the manufacturing industry. In this role, you will be responsible for supporting legacy and new elevator control system electronics through PCB prototyping, test rig development, and failure analysis. In order to be successful in this position, you must have hands-on PCB fabrication and test experience along with an AS in Electrical Engineering or BS in Electrical Engineering Technology. Preference will be given to someone with component obsolescence and root cause failure analysis experience. \n Electrical Engineering Technician Job responsibilities: \n \n Procure components, organize BOMs, and assemble and solderCulligan Quench
Troy, NY • (37.8 miles) • Full Time • $23.00 to $23.75 / hr • 11/12/2026
\n About Culligan Quench \n \n \n Culligan Quench’s purpose is to impact people’s lives and improve the earth by helping to eliminate the 500 million plastic bottles consumed each year. We play a front-line role in the battle against single-use plastic water bottles by delivering on-demand filtered water solutions to more than 120,000 healthy and environmentally conscious customers across North America. Our bottle-free water coolers, ice machines, sparkling water dispensers and coffee brewers purify the existing water supply, providing an endless supply of clean water and water-based beverages for a fixed monthly fee, typically under a long term bundled service and rental subscription agreement. Culligan Quench has grown from a small regional company to an international leader that had a sElection Systems & Software LLC
Springfield, MA 01105 • (35.9 miles) • Full Time • $23.50 to $25.50 / hr • 11/8/2026
We support democracy. Our vision at Election Systems & Software (ES&S) is simple and unwavering we provide products and services of exceptional quality and value to maintain voter confidence and enhance the voting experience. We accomplish this through continuous investments in research and development, resulting in regular product updates and security enhancements for each voting system we design, build, sell and support. Join the ES&S team where we are crafting the future of voting in the United States! On our team, you will push boundaries to provide solutions that meet the industry’s ever-evolving needs. Our people apply their innovative perspective to challenges big and small, and ES&S provides the resources to make our employees’ vision a reality. Summary/Objective: The Field ServiceApex Entertainment
Albany, NY 12203 • (41.3 miles) • Full Time • $25.00 to $28.00 / hr • 11/7/2026
Now Hiring: Bowling Technician Location: Apex Entertainment, Albany NY Do you have a knack for mechanical systems and a passion for keeping things running smoothly? Apex Entertainment is seeking a skilled Bowling Technician to maintain and service our bowling lanes and equipment. This is a hands-on role where your expertise ensures guests enjoy safe, seamless, and fun bowling experiences. If you're ready to apply your technical skills in a high-energy, guest-focused environment - we want to hear from you! Key Responsibilities: Equipment Maintenance Maintain and repair Brunswick GSX pinsetters, Custodian lane machines, scoring systems, ball returns, bowling balls, and related components Perform routine service and preventative maintenance on all bowling equipment Clean, adjust, and troublesOWL Services
Albany, NY 12211 • (39.3 miles) • Full Time • $24.00 to $26.00 / hr • 11/3/2026
Quines somosOWL Services es el principal proveedor de ventas, instalacin, gestin de programas y servicios para empresas minoristas, comerciales, de flotas, de aviacin y marinas, y de generacin de energa de emergencia en todo Estados Unidos. Con 33 oficinas y centros de distribucin y ms de 1.400 profesionales de servicio de campo, OWL ofrece una plataforma de servicios que incluye construccin, cumplimiento y pruebas, mantenimiento y reparacin, modernizacin y re-imaginacin, y soluciones de carga de vehculos elctricos para mantener a las empresas y a las personas en movimiento las 24 horas del da, los 7 das de la semana, los 365 das del ao. Las empresas de OWL Services han recibido numerosos premios a lo largo de los aos por su ejemplar servicio al cliente. Ms recientemente, recibi el PremioLawn Doctor Of Wilmington/Brunswick, NC
Pittsfield, MA 01201 • (11.1 miles) • Full Time • 10/30/2026
Benefits: 401(k) matching Bonus based on performance Dental insurance Health insurance Opportunity for advancement Paid time off Vision insurance Lawn Doctor is looking for a dependable, detail-oriented Mosquito Technician to help protect our customers’ outdoor spaces. If you enjoy working outdoors, take pride in your work, and want to be part of a growing local business, this could be a great fit. Lawn Doctor treats with top quality, environmentally sensitive products, apply mosquito control or supplements, and offers appropriate new services to customers and prospects while in the field. Lawn Doctor believes that employees who are given a chance to grow professionally will in turn help to grow our business. Opportunities for advancement and licensing are made available. The ideal candidaSungrow USA Corporation
Albany, NY 12207 • (36.2 miles) • Full Time • $36.00 to $40.00 / hr • 10/24/2026
About Sungrow: Sungrow North America is a leading provider of renewable energy solutions, specializing in the development and manufacturing of photovoltaic inverters and energy storage systems. The company offers a comprehensive range of products and services designed to optimize the performance and efficiency of solar power installations. Sungrow North America is known for its commitment to innovation, high-quality standards, and exceptional customer service, aiming to provide sustainable and reliable energy solutions to meet the growing demand for clean power. The Position: This role supports areas of field Service operation within Sungrow USA related to commissioning, warranty, and Operations and Maintenance (O&M) of the expanding installed sites in the region. Reporting to the regionalProfessional Care Match
Pittsfield, MA 01201 • (11.1 miles) • Full Time • $58,000 to $68,000 / yr • 11/17/2026
Full Time Caregiver Field Supervisor At Professional Care Match , we are committed to providing exceptional care solutions for seniors in their homes. As a Caregiver Field Supervisor, you will play a critical role in ensuring the highest level of care and support for our clients while also overseeing a team of caregivers. This position will include site visits, training new staff and completing a formal Join our team of compassionate experts and contribute to our mission of empowering families with peace of mind and enabling seniors to stay in their homes. Responsibilities: Supervise and manage a team of caregivers , providing guidance, training, and feedback to ensure exceptional client care Conduct client assessments, develop and implement personalized care plans, and monitor client outc