We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Fabricators are responsible for fabricating and assembling polyethylene pipe to create a variety of customized structures such as: fittings, valves, T's, Y's, elbows, aqua shields, geothermal vaults, manholes, dual containment units, pumps, gas aeration lines and similar structures that meet customer specifications by performing the following duties: Read and interpret blueprints, product drawings and pic ticket orders to determine materials, tools and equipment needed to complete work Follows quality control procedures to ensure that the assembled, fabricated product meets customer specifications Upholds accurate records of materials used on "ticket"; locates and pulls required materials from inventory Maintains clean work area and equipment; following safety procedures concerning use of equipment and materials to maintain safe working conditions Operates ISCO's fusion and fast fusion equipment, cranes and forklifts
Schedule: Four day work week, Monday - Thursday
Benefits: Medical Dental Vision 401k
Qualifications: Must be able to read and interpret blueprints, product drawings and pic ticket orders to determine materials, tools and equipment needed to complete work. Be able to utilize a variety of hand tools, saws and cutting equipment and performs other related duties as assigned Basic computer skills Must be able to lift up to 40lbs on a regular basis and stand for long periods of time
At ISCO, we put high value on appreciation and respect, and provide you with an opportunity to really make a difference. ISCO is a family owned and operated company born and raised in Louisville, KY that is focused on our team members’ growth.  ISCO Industries is an end-to-end piping solutions provider that specializes in HDPE, working with leading edge technology that makes us a market leader.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

An instrument repair cleaner's job is to detail and clean rental instruments and prepare them to return to stock in a timely and proficient manner. Essential Functions (not all-inclusive): Detail and clean instruments in a timely manner based on production standardsReport quality control rejectsPerform general warehouse and distribution tasksOther duties as assigned About Music & ArtsMusic & Arts embodies the world of creativity and music by encouraging our teammates to find their own individual sound. We strive to create lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the almost indescribable happiness that comes from playing an instrument. We believe in putting our customers first, engaging with respect and integrity and fulfilling our mission with passion.The first Music & Arts was located in a small house in Bethesda, MD and run by founder Benjamin O'Brien. When Music & Arts opened its doors in 1952, we offered printed music, music lessons, dance lessons, and art supplies. Ben decided shortly after opening his business that he wanted to focus on music to better serve his customers -- a decision that remains intact to this day.Since the 1990's, Music & Arts has expanded nationwide through organic growth and a series of acquisitions and mergers with other music dealers. In 2005, Music & Arts joined forces with American Music to become the largest band and orchestra instrument retailer in the United States. Based in Frederick, MD, Music & Arts is now part of the Guitar Center enterprise and comprises 225+ retail stores, 200+ educational representatives, and 250+ affiliate locations.Tojoinourband,you'llneedthefollowingexperience: High School Diploma or GED required. Pay Rate:$15.00/hr The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Lovethisgigandwanttoapply Send your resume and cover letter today along with salary expectations!Music & Arts is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job- related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: This position welds parts and components for equipment, products, and installations by means of MIG, MAG, TIG, electrode welds or any other welding application. As part of a customer-focused team, you will be working with tight deadlines, challenging mechanical problems, and discussing the work with the manager before, during, and after work completion. Shift Hours: Mon-Thur / 3:30pm - 2am (Training on 1st shift will be required for up to 6 months) Responsibilities: Select the appropriate welding method, such as TIG, MIG, or stick.Proper Identification of materials and component preparation.Welding repairs on raw and finished parts.Complete all welding work assigned according to operation instruction.Verify the quality of finished work, demonstrating an in-depth understanding of specifications and workmanshipMeet production goals relating to efficiency, schedules, and scrap.Record accurate, timely data on computer-based systems or in manual logs.Maintain a safe workplace by wearing relevant protective equipment according to safety protection requirements, following procedures and rules, and completing training.Clean and maintain equipment and tools and keep an organized workspace.Able to define, evaluate, and discuss quality workmanship related to welding.Must show a customer-service mindset for on-time delivery and quality work.Demonstrated track record of reliable, dependable attendance; able to work overtime.Other duties as assigned. Requirements: 3-5 years of welding experience in a manufacturing environmentAbility to obtain ASME welder certifications within 6 months of employment (Horizontal stick/TIG and flat MIG)Standing for long times required, frequent lifting with occasional lifting up to 50 pounds. The pay range for this position is $19.34 - 28.98 USD Hourly Benefits Starting from Day 1: Medical, Dental & Vision Insurance (including FSA and HSA options)Life Insurance + Supplemental Life, Child, Spousal, and AD&D InsuranceShort and Long Term DisabilityRetirement Planning, 401(k) plan, & Financial Wellness ResourcesEducational Assistance ProgramTime off Policies (including sick leave, parental leave, and paid vacation)Eligibility requirements apply to some benefits and may depend on job classification and length of employment. Req ID : R-13415 Job Family Group : Operations Job Family : OP Welding EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

ConstellationHOME is growing with a focus on providing employees with support and opportunities to achieve their career goals.PLEASE NOTE: THIS IS A PART TIME ROLE OFFERING 25 HOURS PER WEEKHere are a few highlights of ourcomprehensive and competitive benefitsplan:40-hour week guarantee with flexible schedules: Work life balance is no longer a nice to have but a necessity. Our flexible schedules allow you to balance both your career and personal life.Take home vehicle:Avoid the wear and tear on your personal vehicle by starting your day from home.Annual raises and bonus:We recognize the achievement of financial, safety, operational and strategic goals through an annual incentive and bonus program.Training & Development:Our in-house training rivals most trade schools and helps keep you up to speed as the industry and technology change.Career Path Opportunities:We have several career paths that allow journeyman to grow within our organization.Competitive Pay:On average, our Journeyman Technicians can earn over $100,000 per year. Job Summary:Identify problems and have the ability to correct problems in specified appliances, or the refrigeration cycle and electrical portion of HVAC equipment. Perform some system work on HVAC equipment.Primary Duties and Responsibilities: (Essential Job Function)Performs and trains others in preventive maintenance on all residential heating, air conditioning and ventilation equipment.Assists in sealed system HVAC or advanced appliance repair as part of training and development.Performs advanced clerical duties necessary to complete requests for service.Maintains advanced Company stock and equipment.Knowledge:Advanced knowledge in tools and material related to the service field.Skills/Abilities:Advanced skills in communicationAdvanced skills in sales of all services offered by Company.Advanced skills in servicing of appliances or heating and air conditioning equipment.Advanced skills in customer relations.Advanced skill in servicing gas/electric water heaters.Education/Experience:Three (3) to four (4) years work experience or combination of time in accredited trade or vocational training program equaling three (3) to four (4) years in basic service for heating, ventilation and air conditioning.CFC certification I and II, Maryland State HVAC Journeyman License and Gas Fitter Card.Competencies:Other (Including physical requirements, working conditions, etc.):Works under direct supervision and selects from a variety of established procedures to accomplish assigned tasks.Performs various temporary complex job duties as assigned by the Supervisor.DisclaimerMust have a valid Driver's license and meet Company driving standards.Recent convictions for crimes reasonable related to the activities of this job may disqualify an applicant.

Seize Your Opportunity! 50% Rent Discount! Career Growth Opportunities + Much More! Pay: $20.00 to $24.00/hour What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle. Live within a 30-minute commute of the properties. HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience.Must successfully pass a criminal background check and drug screen. Benefits of Employment: Pay Range: $20 - $24 per hourUp to 50% Rent Discount Property Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC4525 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

MAINTENANCE MECH-UNION Baltimore, MD SINAI HOSPITAL MAINTENANCE Full-time - Evening shift - 3:00pm-11:30pm Support Services/Security/Trade 88317 $17.50-$17.50 Posted:March 20, 2025Apply NowSave JobSaved SummaryJoin a team that values collaboration, respect and growth. Facilities plays a crucial role in ensuring the safety and efficiency of the hospital, making a difference in patient care every day. Join a system that offers competitive benefits, retirement, recognition program, vacation and holiday pay as well as free parking.JOB SUMMARY: This position is responsible for general facility, building and equipment maintenance and repair, both scheduled and unscheduled tasks, as assigned by the Call Center and/or Facilities and Maintenance management. In general, tasks that will be completed include: Work Order completion, Preventative Maintenance completion, problem identification and resolution, determination of material and supplies required for problem resolution, documentation of activities, utilization of the Computer Maintenance Management System, and communicating with the department’s managementREQUIREMENTS:High School Diploma, GED equivalent or High School certificate preferred. Minimum of one year of maintenance experience required.Preference will be given to candidates with experience in healthcare or commercialsettings.TRAINING IS ON DAY SHIFT, UP TO 90 DAYS GIVE OR TAKEUnion rate $17.50 per hourAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive toCARE BRAVELYfor over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay and sign-on bonuses up to $3,000 (per location).Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Refrigeration Start-up Technicians are responsible for start-up of supermarket refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time as well as assist with Energy Optimization (EO) projects. The ideal candidate should know advanced solid-state controls; oil systems safety controls; mechanical sub-cooling; introduction to head pressure controls for energy reduction; introduction to energy management systems (EMS); refrigeration rack oil systems; advanced de-frost diagnosis; and single and parallel compressor system start-up in a supermarket environment. Technicians must carry the skillset of a Journeyman level which includes construction experience in performing installation of refrigeration systems including electrical, plumbing, and fixtures. The technician will function as the subject matter expert for processes, procedures, and projects.Performs evacuations of parallel racks after verifying pressure tests.Performs all EMS wiring and programming for all manufacturers of EMS systems.Performs full start-up of new parallel refrigeration systems and individual systems.Lead small projects such as single case and condenser changeouts.Assists with EO projects which would include retro-commissioning of supermarkets for system performance or utility programs, EMS upgrades, leak detection upgrades, and gas conversion projects.Works with local branch Service and Construction Managers between projects to assist in problematic stores, training for junior technicians and foremen, or other areas as needed.Perform other duties as assigned. Qualifications: High school diploma or GED.Coursework at an accredited vocational-technical or trade school.3+ years of supermarket EMS systems.EMS Certification preferred.5+ years of experience in commercial refrigeration; especially experience with parallel rack systems *CO2 a Plus*Experience and proficient knowledge of supermarket refrigeration.EPA I and II Certification required.Valid Driver’s License is required at all times.Good driving record.Solid working knowledge of the use of the Microsoft suite of applications (Word, Excel, etc.)Expert knowledge of refrigeration, ice machines, and electrical systems.Expert knowledge of single systems, parallel racks systems, display cases, and walk-ins.Ability to efficiently troubleshoot commercial and supermarket refrigeration equipment.Expert knowledge of EMS systems in supermarket applications for wiring and programming (CPC, Novar, Danfoss)Strong mechanical aptitude.Good communication skills and the ability to build strong relationships with the customers, management, crew, and team.Knowledge of and ability to read blueprints on refrigeration, electrical, and plumbing.Ability to multi-task effectively.Travel, overnight, and overtime work as needed.Ability to organize and prioritize your work schedule and the work schedules of others on a short-term basis Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Journeyman-HVAC, Journeyman-EMS, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, Electrical, start-up, startup

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Be part of the future!We are one team, dedicated to working collaboratively to create the purposeful solutions that propel the world forward. We hope you will join our diverse team of top people – you bring your talent, and we’ll give you the space and opportunities to grow and succeed. We are committed to make a difference.What we offer:• Competitive Starting Pay• Paid Training• Global Advancement Opportunities• Company Vehicle (as applicable)• Referral Bonuses• Comprehensive Benefits• Medical/Dental/Vision insurance• Health Savings Account (HSA)• Life Insurance• 401(k) savings plan with company match• Short-Term and Long-Term Disability• Employee Assistance Program• Wellness Program• And More!What you will do:Under general direction, perform preventive maintenance, repair, installation and/or replacement of HVAC Controls Systems & Equipment, Building Control Systems, and occasionally Fire/Security Systems.Mostly, work will involve Johnson Controls Metasys brand of building automation systems and controls products.How you will do it:Experience with programming and/or troubleshooting in one or more of the following brands of HVAC Controls products is highly desired: Johnson Controls, Honeywell, Siemens, Delta, Distech, Carrier, ALC, and/or Andover. Experience with BAS communication protocols should include one of the following: BACnet MSTP, BACnet IP, N2, P1, Modbus, and/or LON.Additionally, Technical Team Lead shall assist branch leadership with coaching and mentoring of branch technicians with the delivery of customer satisfaction and providing technical support and assistance with technical development for others in the HVAC Controls team.Ensures work is being performed in compliance with company, state, local and Federal legal requirements and operates on the job with the highest level of ethics.Properly completes all required company, customer, and service documentation.What we look for:RequiredHigh School Diploma or GED (Bachelor’s Degree, preferred)At least 3 years of related experienceAdheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all Technicians. Provides safety awareness and instruction to subcontractors on Johnson Controls work sites.Recognized as a Leader by peers while being a coach and mentor within the branch. Escalation point on technical issues and provides on-the-job training for other technicians.Provides solutions to others on very complex system problems by either troubleshooting or advising how to resolve problems.Escalation point from the branch to the technical resource team in Milwaukee for critical issues. Viewed as an expert in given field by both employees and customers.Assists management with assuring proper field operational disciplines of other Technicians are followed.Regularly provides input on development and training needs of the branch.Assists in developing quotes and estimates for identified L&M work and submits to the Customer, Service Manager or Customer Service Agent, as appropriate.Assists with the identification of material needs required for service delivery.Assists the Service Manager or Customer Service Agent with identifying and scheduling individuals with the correct skills and knowledge to perform repairs or installation.Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided outstanding issues and recommends system enhancements, upgrades, and or repairs.Manages assigned work to meet a professional level of execution, on-time and to the customer satisfaction.Provides consultant level services for customers related to building system repairs and enhancements.Ensures ultimate customer satisfaction levels with assigned customers.Conducts self-study (reading, research and practice) to improve and maintain technical proficiency.Completes all training and certifications as required by the company.

Overview: GovCIO is currently hiring for a Senior Network Architect/SME in Enterprise Level Facilities Security and Industrial Control Systems and Networks for our NIH-CIT proposal. This position is located in Bethesda, MD and is a remote/hybrid position. Responsibilities: The SME role’s responsibilities include:Coordinate with the Section Manager to evaluate, design, and test architecture designs and services from the roadmap backlogLead the transition of user accepted designs and services to the Operations and Security TeamsProvide subject matter expertise in Enterprise-level facilities securityProvide subject matter expertise in Enterprise-level industrial control systems networks (i.e., Supervisory control and data acquisition (SCADA) networks)The Network Architecture role's responsibilities include:Strategically plan, architect, design, engineer, develop, test, implement, modernize, and enhance the functional capabilities, capacity, and performance of the NIH Network and TIC Services in alignment with NIH future state architecture objectivesSoftware and hardware installation, configuration, upgrades, and maintenanceTeam with the Security Section to achieve security architecture requirementsMaintain technical architecture documentationTroubleshooting and problem resolutionChange managementSupport resources responsible for security implementation, monitoring, maintenance, and vulnerability remediationStrategic Transformative planning for network architecture services Qualifications: Bachelor's with 12+ years (or commensurate experience)Required Skills and ExperienceCCIE Certification: Written and practicalWithin each of the Cisco Certifications, the following specializations are needed and listed in order of importance: Routing and Switching, Service Provider, Data Center and WirelessClearance Required: Must be able to obtain and maintain a Public Trust clearance.Preferred Skills and Experience: Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $108,310.00 - USD $149,027.00 /Yr.

RESPONSIBILITIES: Operate a forklift safely and efficiently. Operates wrapping equipment when necessary. Keeps stock and materials in orderly fashion. Documents materials unloaded and taken off trucks. Responsible for pulling job for production, inbound forms, inventory tags and counts on materials received or shipped. Assists other shipping and receiving material handlers to balance the workload, organize warehouses, and perform general cleaning. Follows rules and procedures relative to the safe and efficient operation of the forklift, also including reporting any missing, broken, bent or worn parts of fork lift to supervisor and/or maintenance. Alert to any obvious defects of incoming material. Adheres to all safety and work rules, company policies and procedures. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. BASIC QUALIFICATIONS:High school diploma/GED. 6+ month’s prior experience operating a forklift. Ability and willingness to work overtime on short notice, both during the week and weekends.Ability to work in manufacturing environment, with varying temperatures based on season, around machinery, and heavy forklift traffic. Ability to obtain and maintain PCA certified forklift license. Must be authorized to work in the U.S. KNOWLEDGE, SKILLS & ABILITIES: Ability to work in a fast paced environment and handle multiple requests simultaneously. Ability to work independently and within a team, effectively communicating with members.

Overview: Hogan & Sons Tire and Auto- We provide a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages.The State Inspector will perform state inspections. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career.** REQUIRED: Must have a current/valid Virginia State Inspection Certification and Emissions**Up to $28/hr- Inspector Only (MUST HAVE- VA state safety AND VA Emissions inspector)TECHNICIAN W/ C.R.T (VA state safety AND VA Emissions inspector- Where applicable) up to $45 Flat Rate hourBenefits:Competitive Bi-Weekly PayTuition Reimbursement, up to $3,000 annuallyPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceHealth/Flexible Spending AccountEmployee Assistance ProgramTelemedicine ProgramSupplemental Critical Illness, Hospital and Accident PlansLife Insurance (Company paid)Short/Long Term DisabilityHealth Savings and Flexible Spending Account401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Successfully complete inspections on customer's vehicles.Safely transports customers to and from their place of residence or business using the company vehicle.Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle.Operates company vehicle in a safe and courteous manner obeying all traffic laws.Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines.Performs tire mounting/dismounting, wheel balance and tire rotation.Performs oil changes and other basic services at the direction of the Shop Foreman or Store Manager.While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Foreman or Store Manager. Utilizes the company’s Multi-point Inspection and/or Repair Order to properly document the vehicle condition.Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Qualifications:High School Diploma or equivalentPossess valid driver’s license and pass MVR screening.Must be at least 18 years of ageCurrent Virginia state inspector's license + Emissions.Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there isALWAYS something to do. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

DescriptionFind your future at United! We’re reinventing what our industry looks like, and what an airline can be – from the planes we fly to the people who fly them. When you join us, you’re joining a global team of 100,000+ connected by a shared passion with a wide spectrum of experience and skills to lead the way forward. Achieving our ambitions starts with supporting yours. Evolve your career and find your next opportunity. Get the care you need with industry-leading health plans and best-in-class programs to support your emotional, physical, and financial wellness. Expand your horizons with travel across the world’s biggest route network. Connect outside your team through employee-led Business Resource Groups. Create what’s next with us. Let’s define tomorrow together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipmentRequires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervisionJourneyman electrical license a plusRequires the ability to make low and high voltage repairs to all building electrical equipmentThis includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devicesYou should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyorsFacilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditionsSchedules are bid and awarded according to seniorityFacilities Technicians are represented by the International Brotherhood of Teamsters (IBT)Salary increases will be administered according to the current IBT/United contractNew employees are required to join the union within ninety (90) days of employmentThere is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local LodgeQualificationsUnited values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What’s needed to succeed: Twenty Four months experience required in at least three of the following areas:Electrical (including 480 volt, 3 phase)Structural (including steel frame construction)HVAC (including building management systems)Mechanical (including conveyors)PlumbingPLC electronic/computer controlsMust have completed high school diploma, GED or equivalentAbility to maintain and repair all building disciplines, heavy mechanical and weldingWork may be indoors or outside or in elevated areas anywhere on airportMust be able to climb and work from ladders, and/or walk for extended periodsModerate liftingMust possess sufficient tooling to perform required tasksComputer experience for input and retrieval of dataQualified candidates must be immediately available for full time employmentMust possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contactto request accommodation.The starting rate for this role is $32.65.This is also a bonus eligible position (i.e. profit sharing).We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement).United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT.We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.

Job Summary: Operate and maintain press to production standards and quality. Set-up, adjust and operate equipment to print and fold signatures, ensuring expectations of customer specifications. Duties/Responsibilities: Review job jackets and plan work process to ensure meeting of customer specifications Monitor assigned press machine during run to ensure adherence to specificationsPerforming quick and efficient make-readies, product size changeover and folder changeoversPerform preventative maintenance and troubleshoot machine problems, resolving if possible, notifying GPS or Print Process Manager as neededProvide training, as required, to Assistant in machine operation and safetyComplete and maintain all required paperwork, job jackets, records, documents, timekeeping, etc. Follow all required safety procedures such as: PPE’s, Ergonomics, and etc. Performs job in a manner that protects the health and safety of all employees. Assist with housekeeping in the Press areaOther duties as assigned Basic Qualifications: High School Diploma or GEDStrong math and mechanical skills.Ability to effectively communicate with other employees Desired Skills and Abilities: Previous Press experience is preferredKnowledge of a variety of small hand tools and precision measuring devices is preferred Physical Requirements Ability to frequently transport and position materials weighing up to 65 pounds CJK Group is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

Overview: MARKET LEADING PAY, PLUS BONUSESHonda of Owings Mills is part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service.We are growing and looking for Automotive Service Technicians/Mechanicsto join our team!Our Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees.The salary range for this position is between $20 - $50 per flag hour.We offer...Market Leading Pay, based on experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramYou needAutomotive Technician or Mechanic ExperienceA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsAbility to Achieve Targeted GoalsHigh School Diploma or Equivalent Must have a Valid Driver’s License Group 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.IND1

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently hiring Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. Candidaterequires strong electrical background and must pass electrical assessment.Responsibilities and DutiesTroubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encodersInspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer platesInspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coilsInspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumpsWelding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of workPerforming preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $33.42 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ConstellationHOME is growing with a focus on providing employees with support and opportunities to achieve their career goals.PLEASE NOTE: THE SCHEDULE FOR THIS ROLE WILL BE 1230 - 9 PM M-F WITH A 1 HOUR LUNCHHere are a few highlights of ourcomprehensive and competitive benefitsplan:40-hour week guarantee with flexible schedules: Work life balance is no longer a nice to have but a necessity. Our flexible schedules allow you to balance both your career and personal life.Take home vehicle:Avoid the wear and tear on your personal vehicle by starting your day from home.Annual raises and bonus:We recognize the achievement of financial, safety, operational and strategic goals through an annual incentive and bonus program.Training & Development:Our in-house training rivals most trade schools and helps keep you up to speed as the industry and technology change.Career Path Opportunities:We have several career paths that allow journeyman to grow within our organization.Competitive Pay:On average, our Journeyman Technicians can earn over $100,000 per year. Job Summary:Identify problems and have the ability to correct problems in specified appliances, or the refrigeration cycle and electrical portion of HVAC equipment. Perform some system work on HVAC equipment.Primary Duties and Responsibilities: (Essential Job Function)Performs and trains others in preventive maintenance on all residential heating, air conditioning and ventilation equipment.Assists in sealed system HVAC or advanced appliance repair as part of training and development.Performs advanced clerical duties necessary to complete requests for service.Maintains advanced Company stock and equipment.Knowledge:Advanced knowledge in tools and material related to the service field.Skills/Abilities:Advanced skills in communicationAdvanced skills in sales of all services offered by Company.Advanced skills in servicing of appliances or heating and air conditioning equipment.Advanced skills in customer relations.Advanced skill in servicing gas/electric water heaters.Education/Experience:Three (3) to four (4) years work experience or combination of time in accredited trade or vocational training program equaling three (3) to four (4) years in basic service for heating, ventilation and air conditioning.CFC certification I and II, Maryland State HVAC Journeyman License and Gas Fitter Card.Competencies:Other (Including physical requirements, working conditions, etc.):Works under direct supervision and selects from a variety of established procedures to accomplish assigned tasks.Performs various temporary complex job duties as assigned by the Supervisor.DisclaimerMust have a valid Driver's license and meet Company driving standards.Recent convictions for crimes reasonable related to the activities of this job may disqualify an applicant.

Work Together, Succeed Together – Maintenance Technician Needed! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws.Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $23.00-$26.00 /hr.Up to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC4434 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Overview: Sheetz Store Support is hiringEquipment Service Techniciansto join our World Class maintenance team. Our technicians maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least one (1) to two (2) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation starting from$24 - $33 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Read plans to perform necessary workPerform layoutsPerform take-offsDraw and measure tie-insMaintains a complete set of tools Qualifications: ADDITIONAL RESPONSIBILITIESResponsible for assets used on job siteHolds a valid driver’s licenseMake purchases at local supply houses according to Company procedureOther duties as assignedEDUCATION AND EXPERIENCECompleted a four-year apprenticeship in specified field.Journeyman’s licenseCFC UniversalsExperience with rectangular, spiral, and oval duct assembly and installation.Minimum two+ years commercial HVAC sheet metal experience as a mechanic.KNOWLEDGE, SKILLS, AND ABILITIESAbility to understand written sentences and paragraphs in work-related documentsAble to use logic and reasoning to identify the strengths and weaknesses of solutions and approaches to problemsAble to perform mathematical calculationsKnowledge of tools and equipment needed to complete a jobPHYSICAL AND MENTAL JOB REQUIREMENTSAble to lift up to 60 pounds.Spend long periods of time standingAbility to climb ladders to perform workWork in high elevationsWORKING CONDITIONSPeriodic travel to multiple job locationsMay be subjected to inclement weather and hazardous working conditionsWork weekend or night-time duty, as needed Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

***Consideration given to applicants residing within a commutable distance to New Freedom, PA or willing to relocate***What You Will Do:Our Test Engineer will oversee product testing throughout the test life cycle. This includes designing, planning, execution, and preliminary analysis of results. The Test Engineer must possess and/or have the ability to develop a working knowledge of HVAC/R equipment and its application and has experience with component or system testing, test procedure development, mechanical fluid or airflow system design, troubleshooting, and operation. our Test Engineers are required to execute the testing for individual test subjects in order to successfully and efficiently complete testing for the product area customer. In this role you will conceive, develop, and evaluate plans for solving complex testing challenges. The ideal candidate will have technical aptitude in HVAC. This position is not eligible for Visa sponsorship.How You Will Do It:Provide technical communications for Test Engineering to product customer(s).Plan and execute tests of chillers and components. This may include:Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support, or equivalent groups to agree upon and issue test plans.Work within the Test Engineering team to schedule tests and required resources with regards to capacity limitation.Provide oversight and input to Test Technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review of data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive the evaluation and creation of standard procedures, test standards, and processes using applicable engineering tools. This includes, but is not limited to LEAN, 6-Sigma, Value Stream Mapping, Design of Experiments (DOE), 5S, Gemba, Kaizen (continuous improvement), KPI analysis and development, PDCA (Plan, Do, Check, Act), and Root Cause Analysis.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, and advanced testing services for product customers.What We Look For:BS required in an engineering or engineering adjacent discipline.Preferred combination education and experience, three (3) years direct work experience in the following: HVAC/R equipment development, servicing or testing, good understanding of HVAC/R systems, concepts, and diagnostics.Ability to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Experienced in environments ranging from laboratory, manufacturing/testing facilities, and field sites.Able to work in fast-paced, schedule driven work environment and possess the agility/adaptability to quickly move from one task to another when required. Must be self-motivated.Strong communication skills; willing to confront issues in an open, efficient, and tactful manner.Strong group communication and presentation skills.Demonstrated use of engineering tools and concepts within a manufacturing or testing facility.Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail.Preferred:Familiarity in one or more technical and operational disciplines within HVAC platform development.Background in engineering or development testing.#TestEngineer#Hiring

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers large and small package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility.People • Customers • Trust Principle Accountabilities:Work as part of a team in support of a manufacturing operation with a goal of increasing productivity, decreasing downtime and waste. Assume active role in overall plant facilities-related work. Position requires assisting all jobs on the plant floor.Follow all company safety rules and lockout tag-out procedures.Maintain shop and equipment per 5S standards.May be required to lift up to 30 lbs. for a period of up to 12 hours.Set-up and operate machine to produce product according to customer specifications.Troubleshoot, perform minor repair, and preventative maintenance procedures on machine.Trains Helper, as required.Perform quality checks as required and take appropriate action when needed.Perform other job-related duties as assigned or delegated.Comfortable with computers and touch screens.Cross-train on other machines and jobs.Complete necessary reports in an accurate and timely manner, including but not limited to: Production Data, Machine Operational Status, Safety Data, and Quality Data.Input maintenance work orders into BPMS software. Be proactive in the maintenance of equipment.Switch duties with Assistant Operator or Helper if necessary.Comply with the facility’s food packaging safety program processes and procedures.Complete annual food packaging safety training.Report any discovered food packaging safety risks/concerns to the food packaging safety management representative or direct supervisor.Comply with all company policies and procedures, including but not limited to: Safety, GMP, FSSC, ISO, and maintaining good housekeeping.Adhere to production schedule and make recommendations for optimizing the schedule to meet cost, quality, and service goals. Report any unusual scheduling issues to supervisor. Perform other duties as assigned. Basic Qualifications:High School Diploma or GED. Be passionate about maintaining a safe work environment. Strong mechanical aptitude and possess problem-solving skills. Able to pass pre-employment background check and drug test.Must be able to sit, stoop, and bend.Ability to work any shift, including overtime and weekends as needed.Must be authorized to work in the U.S.Ability to work in manufacturing environment, with varying temperatures based on season, around machinery, and heavy forklift traffic.Preferred Qualifications:Experience in a packaging or other manufacturing environment. Knowledge, Skills, and Abilities:Must be willing to work closely on a day-to-day basis with other production personnel. Excellent communication skills. Work with a sense of urgency to reduce downtime of machines. Ability to work in a fast-paced environment and handle multiple requests simultaneously. All qualified applicants must apply at Careers.packagingcorp.com to be considered.PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories.

MAINTENANCE MECHANIC JOURNEYMAN UNION Baltimore, MD SINAI HOSPITAL MAINTENANCE Full-time - Day shift - 7:00am-3:30pm Support Services/Security/Trade 81436 $24.63-$24.63 Posted:March 24, 2025Apply NowSave JobSaved SummaryDAY SHIFT POSITION!!Join a team that values collaboration, respect and growth. Facilities plays a crucial role in ensuring the safety and efficiency of the hospital, making a difference in patient care every day. Join a system that offers competitive benefits, retirement, recognition program, vacation and holiday pay as well as free parking.SKILLED TRADESPERSON WHO IS RESPONSIBLE FOR MAINTAINING, REPAIRING AND TROUBLESHOOTING MECHANICAL SYSTEMS WITHIN A HEALTHCARE FACILITYJOB SUMMARY:This position is responsible for general facility, building and equipment maintenance and repair, both scheduled and unscheduled tasks, as assigned by the Call Center and/or Facilities and Maintenance management. In general, tasks that will be completed include: Work Order completion,Preventative Maintenance completion, problem identification and resolution, design of minor mechanical systems, determination of material and supplies required for problem resolution, documentation of activities, utilization of the Computer Maintenance Management System, and communicating with the department’s management.JOB REQUIREMENTS:Formal working knowledge; equivalent to an Associate's degree (2 years college); requires knowledge of a specialized field5-7 years experience in a Mechanical Maintenance Field including HVAC, plumbing, electrical, fixing our specialized equipment and major components REQUIRED. HOSPITAL/COMMERCIAL EXPERIENCE STRONGLY PREFERREDExperience with HVAC systems (maintaining and repairing heating, ventilation and air conditioning systems), plumbing and piping (ex fixing leaks, maintaining medical gas systems and ensuring water systems function properly), electrical and mechanical repairs (troubleshooting and repairing motors, pumps, boilers and other hospital equipment), preventive maintenance (performing routine inspections and servicing systems to prevent failures) required.Documented training and/or experienceand working knowledge of 120v/208v/277v/460v Electrical required.Documented training and/or experienceand working knowledge of pump repair and motor alignment required.Documented training in and working knowledge of compressor/vacuum pump repair required.Working knowledge of mechanical codes and OSHA regulations required.Preference will be given to candidates with Journeyman Certificate/License in the mechanical field (HVAC, Plumbing, etc)Full valid Driver’s License andgood driving record preferredEmployees in this position may besubject to be on-call on emergent basisUnion rate $24.63 per hourKEY WORDSMechanicalCommercialHospitalAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive toCARE BRAVELYfor over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.Expected hourly rateof $28.63 to $31.81, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONInstalls and modifies existing residential HVAC equipment and all types of related products according to installation instructions, supervisor instructions and all applicable county or city codes.Performs miscellaneous trouble shooting and repairs.Modifies and fabricates sheet metal as needed per installation.Able to identify electrical, plumbing and safety problems that apply to the installation and takes necessary corrective action.Performs necessary clerical duties with job.PRIMARY DUTIES & ACCOUNTABILITIESPerform independently work skills in residential heating & air conditioning replacement applications.Perform independently work skills in residential plumbing and gas piping applications.Perform independently work skills in residential flue venting applications.Perform independently work skills in residential sheet metal ducting applications.Assists in other advanced applications of residential home comfort products.Trains others in the general work skills of residential home comfort applications.Trains others in the general work skills of residential HVAC install applications.Performs clerical duties necessary to complete job work orders.Maintain proper truck stock and equipment maintenance.Works independently or under direct supervision and selects from a variety of established procedures to accomplish assigned tasks.Performs various specific job duties as assigned by the Dept. Manager.MINIMUM QUALIFICATIONS3+ years of experience in residential HVAC installations for residential systems.Maryland State Journeyman HVAC License.Valid Maryland driver's license.Levels I & II CFC certification.Gas fitter's license.Must have basic hand tools to properly perform job requirements.Demonstrated knowledge of sheet metal skills, copper, and gas piping installations.Demonstrated knowledge of residential Gas & Electric supplied heating furnaces.Demonstrated knowledge of residential Hot Water Heaters.Demonstrated ability to communicate effectively both orally and in writing along with customer service skills.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive PayPaid vacation, holidays, and sick time -Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Check us out: A Day in the Life of the Building of the Future - https://youtu.be/pdZMNrDJviY]Check us Out: A Day in a Life at Johnson ControlsPlant Operations https://youtu.be/cjZpE51xySYWhat you will doSuccessful applicants will have a good understanding of standard technical principles, theories, concepts, techniques, and processes. Has a working knowledge of AutoCAD and Drafting standards and applies them towards the execution of Sales Orders or ECNs. Capable of creating and modifying diagrams, piece part drawings and simple assemblies. Has a basic understanding of electrical symbology, geometric dimensioning, and tolerance principles.How you will do itRead and understand technical drawings of components such as instruments, control panels, starters, etc.Work with Engineers, other design personnel and shop personnel to insure proper design.Develop wiring diagrams using AutoCAD Electrical 2024 (Bentley, Plant 3D or Inventor experience a plus).Develop 2D plan, elevation and section drawings of control panels using AutoCAD Electrical. Includes mounting components, terminal blocks, associative dimensioning and avoiding interference between equipment.Develop and implement designs for conduit and/or cable tray installations.Develop bills of material using MS Access database and web-based configuration tools.Check other drawings (peer checking).Work with Operations group personnel to answer questions, make corrections, etc.The ability to multitask and an attention to detail are a must.RequiredRequires an AS degree or equivalent from college or technical school or two (2) years related experience in electrical machinery design. Requires CAD education or equivalent experience. Personal computer working capabilities include email, browser, MS Word, MS Excel, etc.About Us: Johnson Controls is an equal employment opportunity and affirmative action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyou

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ConstellationHOME is growing with a focus on providing employees with support and opportunities to achieve their career goals.Here are a few highlights of ourcomprehensive and competitive benefitsplan:40-hour week guarantee with flexible schedules: Work life balance is no longer a nice to have but a necessity. Our flexible schedules with 9 recognized holidays a year allow you to balance both your career and personal life.Take home vehicle:Avoid the wear and tear on your personal vehicle by starting your day from home.Annual raises and bonus:We recognize the achievement of financial, safety, operational and strategic goals through an annual incentive and bonus program.Training & Development:Our in-house training rivals most trade schools and helps keep you up to speed as the industry and technology change.Career Path Opportunities:We have several career paths that allow journeyman to grow within our organization.Competitive Pay:On average, our Journeyman Technicians can earn over $100,000 per year.Job DescriptionPerforms a wide range of plumbing install and services for residential customers. Promotes the sale of all other services offered by our Company to customers.PRIMARY DUTIES/RESPONSIBILITIES- Installs Hot Water Boilers, Steam Boilers, Water Heaters and modifies existing plumbing lines and equipment according to installation instructions, supervisor instructions and all applicable county or city codes.-Identifies and corrects problems in hot water/steam boilers, water heaters and gas/water piping.-Performs minimum service on steam boilers with supervision.-Performs a wide range of plumbing services to include installing new gas line and water lines. Able to put perform air test on gas piping.-Modifies and fabricates pipe fittings as needed per installation.-Identifies electrical, plumbing and safety problems that apply to the installation and takes necessary corrective action.-Performs clerical duties necessary to complete requests for service.MINIMUM QUALIFICATIONS:-Journeyman's license-Valid driver's licenseKNOWLEDGE- Advanced knowledge and skills in residential plumbinginstall and services.- Advanced knowledge of local plumbing and gas codes.- Advanced knowledge of the tools and materials related to the plumbing install and service field.Skills/Abilities:- Must have advanced ability to read and comprehend blue specifications / schematics.- Must have a Maryland State Plumbing License and active back flow.- Advanced skills in the servicing of hot water and steam boilers.- Advanced customer relations skills.- Advanced ability to communicate effectively both orally and in writing.- Advanced skills in the sales of services offered by our Company. EEOAt Constellation, we are proud to be an equal opportunity employer. Whether you are an employee or applicant, you will receive consideration for employment without regard to: age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law.We are committed to advancing diversity, equity and inclusion and believe in attracting, retaining, and advancing employees who will best serve and represent our customers, partners, and communities. We support a workplace that ensures mutual respect, where everyone has the opportunity to grow and contribute at their greatest potential. Constellation will provide you the tools and resources to build and power a successful career.GOVERNMENTVEVRAA Federal Contractor

Additional Job Info: This position offers a base hourly range of $19.73 - $34.62 per hour, depending on experience and qualifications, plus bonus based on company performance.One of the MANY work perkz at Sheetz is quarterly employee bonuses based on company performance! And there’s more – A LOT more like competitive salaries, PTO and parental leave, 401k match and employee stock ownership, limitless professional development and growth opportunities, tuition reimbursement, full medical, vision and dental coverage, and snack discounts! Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

We are currently hiring for our 2nd shift Assembler Package units! Come join a great team! Apply now!What you will do:Complete welding and assembly of complex standard products.Will train on 1st shift and move to 2nd shift after training is completed. Starting rate is $30.99/hour plus an additional $1.50/hour shift premium when moved to 2nd shift. How you will do it:Performs structural carbon, galvanized and stainless-steel weldingPerforms plasma and oxygen cuttingAble to weld, layout, cut and fit parts to meet drawing tolerancesRegulate current, voltage and select proper tips, rods and sizes for various types of welding according to individual job requirementsManipulate electrode in proper sequence and use care to lay smooth and even bead of required width. (Avoid undercutting of metal)Use hand or power tools to clean equipment after weldingComplete assembly of complex standard products where procedures and methods are prescribed, involving tubing layout and application to package, bending or sawing pipe as neededRequired Qualification:High School Diploma or GED required

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ConstellationHOME is growing with a focus on providing employees with support and opportunities to achieve their career goals.Here are a few highlights of ourcomprehensive and competitive benefitsplan:40-hour week guarantee with flexible schedules: Work life balance is no longer a nice to have but a necessity. Our flexible schedules with 9 recognized holidays a year allow you to balance both your career and personal life.Take home vehicle:Avoid the wear and tear on your personal vehicle by starting your day from home.Annual raises and bonus:We recognize the achievement of financial, safety, operational and strategic goals through an annual incentive and bonus program.Training & Development:Our in-house training rivals most trade schools and helps keep you up to speed as the industry and technology change.Career Path Opportunities:We have several career paths that allow journeyman to grow within our organization.Competitive Pay:On average, our Journeyman Technicians can earn over $100,000 per year. Job DescriptionPerforms a wide range of plumbing services for Commercial customers. Promotes the sale of all other services offered by our Company to customers.Expected hourly rate of $31.82 to $35.35, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).PRIMARY DUTIES/RESPONSIBILITIES- Installs and modifies existing plumbing equipment according to installation instructions, supervisor instructions and all applicable county or city codes.-Identifies and corrects problems in hot water boilers.-Performs minimum service on steam boilers with supervision.-Performs a wide range of plumbing services to include repair or replacement of faucets, toilets, domestic water lines and drain lines.-Modifies and fabricates pipe fittings as needed per installation.-Identifies electrical, plumbing and safety problems that apply to the installation and takes necessary corrective action.-Performs clerical duties necessary to complete requests for service.MINIMUM QUALIFICATIONS-Journeyman's license-Valid driver's licenseKnowledge:- Advanced knowledge and skills in Commercial plumbing services.- Advanced knowledge of local plumbing and gas codes.- Advanced knowledge of the tools and materials related to the plumbing service field.Skills/Abilities:- Must have advanced ability to read and comprehend blue prints / specifications / schematics.- Advanced skills in the servicing of hot water and steam boilers.- Advanced ability in the usage of sewer cleaning machines.- Advanced customer relations skills.- Advanced ability to communicate effectively both orally and in writing.- Advanced skills in the sales of services offered by our Company.

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Unleash your potential with the Johnson Controls team!As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's What We HaveToOfferWhat we offerCompetitive pay Paid vacation/holidays/sick time 10 days of vacation firstyear!Comprehensive benefits package including 401K, medical, dental, and vision careAvailable day one!Extensive product and on-the-job/cross-training opportunitiesWithoutstanding internal resources!Encouraging and collaborative team environmentDedication to safety through our Zero Harm policyCompany vehicle, tools, and equipmentprovidedto complete all jobs.JCI Employee discount programs (The Loop by Perk Spot)Check us Out:A Day in the Life of the Building of the FutureHow you will do it:Creation Contract Specific Bills of Material and Part Requisitions.Completion and release of Food and beverage Quantum Panel Sales Order engineering.Completion and release of YPS Quantum Retrofit Panel Sales Order engineering.Load order specific information into Access Data base related to Panel Sales Orders.Creation Contract Specific electrical schematics and panel assembly drawings.Check and Approve drawings and bills generated by engineering co-workers consisting with ISO requirements.What we look for:Associate Degree or 3 years’ experience in Electrical Controls or Industrial Refrigeration.Microsoft Office 365Proficient in Excel and AccessPreferredAutocad / Autocad Electrical ExperienceRead and understand technical drawings of components such as instruments, control panels, starters, etc.JCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.