Charlotte, MI 48813 • (44.3 miles) • Full Time • 10/10/2026

Description: Summary of Essential Duties and Responsibilities:Operates Machinery such as cutoff saws, shears, rolls, brakes, presses, forming machines, spinning machines, that stretch, punch, cut, shape, and bend metal, lineal, sheets, tubes, or parts and other general labor responsibilities including but not limited to racking, unracking and inspecting.What We Offer:401(k)Medical, Dental, and Vision InsurancePaid Time-OffEmployee Referral ProgramProfit-sharingOther employee incentivesShift Premium for 2nd and 3rd ShiftEssential Duties, Education, Work Experience and/or Work History Requirements:Reads job specifications to determine machine adjustments and material requirements.Assists machine operators to set up job, stack, mark, pack and transport finished workpieces.Properly gauge parts

Holland, MI 49423 • (38.2 miles) • Full Time • 10/10/2026

Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa.The Electrical Engineer is responsible for designing, developing, and supporting electrical systems used in Russells Technical Products’ custom and standard environmental test chambers.This position works closely with Electrical Engineering, Mechanical Engineering, Controls, Production, Test, Service, and Project Management to develop safe, reliable, and cost-effective electrical solutions. The Electrical Engineer will support projects from the initial design stage through manufacturing, testing, installation, and customer service.The ideal candidate is a hands-on problem solver who enjoys working with both custom one-of-a-kind equipment and standard ch

Wyoming, MI • (40.8 miles) • Full Time • 10/10/2026

Position SummaryThe Maintenance Technician is responsible for installing, troubleshooting, repairing, and maintaining plastics manufacturing equipment and facility systems to ensure safe, reliable, and efficient production. This position supports preventive and predictive maintenance activities on molding, extrusion, and auxiliary processing equipment, responds to equipment failures, and drives continuous improvement initiatives that maximize equipment uptime, product quality, and operational efficiency.Essential ResponsibilitiesTroubleshoot, diagnose, and repair electrical, mechanical, hydraulic, pneumatic, and automated plastics manufacturing equipment.Perform preventive and predictive maintenance on injection molding machines, extrusion equipment, presses, robotics, conveyors, chillers,

Freeport, MI 49325 • (35.8 miles) • Full Time • 10/9/2026

Manufacturing Engineer - For Paragon Model ShopLocation: Greater Grand Rapids, MI Area (100% On-Site) Employment Type: Full-Time Compensation: $28.00 – $32.00 / hour ($58,240 – $66,560 / year) About the PositionAs a Manufacturing Engineer at Paragon Model Shop, your day centers directly on the production floor, bridging design models and physical execution. You will arrive ready to tackle dynamic priorities: setting up equipment for specialized runs, maintaining a presence on the production floor, and stepping in alongside maintenance technicians to troubleshoot unexpected machine downtime in real time. Between hands-on floor support calls, you will interface with our engineering and CAD personnel to inspect, verify, and modify CAD models in SolidWorks, ensuring shop floor operators have a

Portage, MI 49024 • (7 miles) • Full Time • 10/9/2026

We Are Looking For Multiple Industrial Maintenance Technicians To Join Our Team In Portage, MI. ASAP!Positions are filling up fast, apply today before you miss this great opportunity in today’s tight market!Industrial Maintenance Technician Requirements:2+ yrs of industrial maintenance or industrial electrical experience required Electrical or mechanical troubleshooting experience required Plastic injection molding machine exp preferredIndustrial Maintenance Technician Benefits:$45,000.00 - $75,000.00 per yearTop BenefitsPlenty of OTPTO401k& MoreIndustrial Maintenance Technician Responsibilities:This role involves performing preventative maintenance, troubleshooting, and repairing plastic injection molding equipment and manufacturing support equipment Responsibilities include diagnosing an

Kalamazoo, MI 49001 • (4.3 miles) • Full Time • 10/8/2026

Position SummaryWe are seeking a skilled and experienced Electric Motor Winder to join our team. This role focuses on the rewinding and electrical repair of electric motors, generators, and other electro-mechanical equipment. The ideal candidate has deep technical expertise, a strong eye for detail, and takes pride in producing high-quality workmanship. This is an opportunity to work in a well-equipped, process-driven shop where craftsmanship is valued.Our shop is EASA accredited, and we use EASA Redesign software, which reflects our commitment to quality, engineering precision, and continuous improvement.Electric Motor Winder – Multiple Locations (Onsite)LocationsSalt Lake City, UTDetroit, MIKalamazoo, MILexington, KYWheeling, WVSavannah, GAColumbus, NEHartford Region, CTKey Responsibilit

Byron Center, MI • (35.5 miles) • Full Time • 10/8/2026

We are hiring for Experienced Parts Cleaner, come join our team and get your career started!Pay Range:$ 18.00Shift:1st Shift, Mon-Thursday 5a-3:30pm, Fridays 5am-10am (Saturdays5 hours as needed). Location: Grand Rapids, MichiganOverview: Join our team as a Parts Cleanerand enjoy a dynamic work environment where your skills directly contribute to the production operation.This is a great opportunity for individuals seeking to develop their career in Parts rolewith potential for full-time employment and career growth.Duties/Responsibilities Parts Cleaner will ensure that all parts meet quality standards and specifications for delivery to other departments or customer. Duties include: deburr, file, scrape and/or grind parts. Run parts through DiscMaster/Timesaver machines as needed. Handle sc

Kalamazoo, MI 49001 • (4.3 miles) • Full Time • 10/8/2026

Who We Are:Founded in 1959, HECO is a family-owned business dedicated to maximizing the reliability of rotating equipment. Through a combination of repair, product sales, field service, predictive maintenance, and equipment management services, we help our customers:See what's going onGet rid of the issuePrevent the issue from happening againWarwood Armature is now part of the HECO organization. Together, we bring over 165 years of combined experience in electric motors and rotating equipment, offering deep expertise in DC motor systems across a wide range of industries.Our clients include companies in power generation, steel and metals, coal and shale, chemical processing, pharmaceuticals, pulp and paper, water and wastewater, aggregates and cement, OEMs, and general manufacturing.At HECO

Jenison, MI 49428 • (44 miles) • Full Time • 10/8/2026

**DIRECT HIRE OPPORTUNITY · JENISON, MI**INDUSTRIAL MAINTENANCE TECHNICIAN3RD SHIFT, SUNDAY THROUGH THURSDAY**PAY****$34 – $36/hr****+ $2/hr shift premium****SCHEDULE****3rd shift, Sun – Thu****10:00 PM – 6:00 AM typical****EXPERIENCE****3+ years****Industrial maintenance****TYPE****Direct hire****Jenison, MI**| | | |THE OPPORTUNITYPro Services Workforce Solutions has partnered with a cellulose insulation manufacturer in Jenison, MI to fill a direct hire opportunity for an Industrial Maintenance Technician on 3rd shift.This role is for a mechanically strong tech who can own the overnight shift. You'll keep conveyors, shredders, and packaging lines running, handle the everyday mechanical fixes, and know when to call in help on the bigger jobs. You don't need to be an expert in everything. Y

Zeeland, MI 49464 • (41.4 miles) • Full Time • 10/8/2026

Night Shift Biweekly Schedule: 4:50pm to 5:00am, 2-2-3 schedule (see below)Hourly Rate: $24.00 per hour, plus a $2.00 shift premium once placed on night shift SundayMondayTuesdayWednesdayThursdayFridaySaturdayTotal hoursWeek 1xxx36Week 2xxxx48Job Summary:Responsible for monitoring and operating processing equipment and assures production quality standards are met.Essential Duties and Responsibilities:Constantly monitor and control plant operations to carry out the established operations plan, anticipating and solving problems in a timely manner, and identifying opportunities for improvement.Physically monitor process temperatures, pressures, material flows and levels to evaluate process operations.Complete sanitation work of areas as assigned.Receive and inspect incoming raw materials, pro

Holland, MI • (40 miles) • Full Time • 10/7/2026

Location: Holland/Zeeland, MI (West MI Lakeshore)Relocation assistance is available for out-of-area candidatesOur client, an automotive manufacturing company in the Holland/Zeeland MI area, is looking for a Quality Engineer to join their team!Global multi-billion-dollar manufacturer with great benefits and growth potential!This position will involve:Making sure the highest quality of parts are delivered to the customersSupporting suppliers, customers, operations and program launchesEnsuring IATF16949 compliance, internal auditing, PPAP submissionsDeveloping and managing quality systemsSupporting corrective action processesProblem-solving, analysis of quality documentationCustomer interaction/communicationCreating/writing quality plans and proceduresMaking sure job performance standards are

Byron Center, MI • (35.5 miles) • Full Time • 10/7/2026

This job is posted on behalf of Manufacturing Skilled Trade Solutions by Top Echelon.Job DescriptionSUMMARYQuality and service oriented manufacturer of flexible packaging with production and distribution facilities located in Sparta, Michigan is growing and looking for pressmen for 2nd shift. The company has shown strong growth since its inception in 1975. They are a full service manufacturer of plastic flexible packaging serving multiple end-user markets. Production capabilities include extrusion, co-extrusion, printing, graphics separation and proofing, converting and lamination. Pressmen will be responsible for setting up and operating flexographic printing press to print designs or lettering on rolls of flexible plastic film.Location: Sparta, MIPosition Type: Full-Time, Direct HirePay:

Grand Rapids, MI 49546 • (43.5 miles) • Full Time • 10/7/2026

Turn Blueprints into Fully Functioning Machines Do you thrive on precision fits, clean alignments, and dialing in final tolerances?Great Lakes Skilled Trades is a fast-growing skilled labor contractor in the Midwest. We connect top talent with strong job opportunitiesimmediate openings, steady work, and pathways for career growth. Role snapshot Compensation: Starting pay: $25.00 - $35.00Assemble industrial machinery and equipment from mechanical blueprints and assembly drawingsFit, align, and install components: bearings, shafts, gearboxes, motors, conveyorsPlumb and integrate pneumatic and hydraulic systemsUse precision measuring tools to validate fit, alignment, and tolerancesTroubleshoot during assembly and testing; make necessary adjustmentsOperate hand tools, power tools, and standar

Niles, MI 49120 • (44.9 miles) • Full Time • 10/7/2026

We’re looking for someone who takes pride in their work, stays organized, and can diagnose problems and follow repairs through to completion.ResponsibilitiesDiagnose and repair commercial mowers, small engines, trimmers, blowers, and other landscape equipment.Perform routine maintenance, including oil changes, filters, belts, blades, batteries, and lubrication.Troubleshoot starting, electrical, fuel system, and hydraulic issues.Maintain and repair trailers and snow removal equipment.Perform truck maintenance and repairs within your experience level.Inspect equipment and address problems before they cause breakdowns.Track repairs, maintenance needs, and parts used.Coordinate parts ordering and communicate equipment status with management.Keep the shop, tools, and work areas clean, organized

Kentwood, MI • (40.3 miles) • Full Time • 10/6/2026

Why Work at Hope Network Industries?We’re looking for motivated individuals with a positive attitude to join our manufacturing team. As a Production Worker, you’ll perform production tasks, ensure quality, and help us meet production goals in a safe, team-focused environment.Why You’ll Love This Role:$14.73/hour starting payWeekly pay + bonus potentialMedical, dental, and vision benefits eligible on day oneRetirement plan with employer matchPaid holidaysNo physical exam or drug screening requiredDiverse, inclusive, and Felon-Friendly workplaceWhat You’ll Do:Operate production machinery safely and efficientlyConsistently meet production targets and quality standardsMaintain a clean, safe work area following OSHA standardsAssist with plant housekeeping and end-of-shift cleanupWork cooperativ

Grand Rapids, MI 49548 • (39.1 miles) • Full Time • 10/4/2026

Position OverviewThe Great Lakes Division Office is expanding throughout the Grand Rapids area and surrounding West Michigan communities. We are currently adding dependable individuals to assist with equipment preparation and customer support activities.No previous experience is necessary. Orientation and hands-on guidance are provided for selected candidates.What This Position Offers• Weekly compensation• Performance bonuses and incentive programs• Opportunity to learn new skills and responsibilities• Supportive team environment• Local travel as part of daily activities (transportation provided for work-related appointments)Our team works in a positive, energetic environment where members support each other and share experiences during daily team meetings.Primary Duties• Assist with light

Kalamazoo, MI • (2.8 miles) • Full Time • 10/3/2026

Grow with Welch's!Welch's is on a journey towards our bold ambition of being the global-leader of convenient, good for you fruit-based food and beverages. To turn this goal into a reality we need you and other exceptionally talented, agile, and innovative individuals who are eager to contribute to something extraordinary!At Welch's, we're not just offering a job; we're inviting you to be a part of a vibrant, authentic, and inclusive culture where you not only belong, but also have the opportunity to unleash the best, most authentic version of you.Industrial Maintenance Electrician Starting pay: $37.86 per hourLocation: Lawton, MichiganAdditional pay for second and third shiftsPut Your Electrical Skills to Work at Welch's Welch's is hiring an Industrial Maintenance Electrician for our Lawto

Battle Creek, MI • (20.4 miles) • Full Time • 10/3/2026

Job Summary:The Tool and Die Technician is responsible for designing, building, maintaining, and repairing precision tools, dies, and molds used in manufacturing processes. This role ensures the production of high-quality components by providing efficient and accurate tooling solutions, adhering to safety standards, and supporting continuous improvement initiatives.Key Responsibilities:Design, construct, and modify tools, dies, jigs, and fixtures based on engineering specifications.Maintain and repair existing tooling to ensure optimal performance and longevity.Conduct troubleshooting and diagnostics on tooling issues to minimize downtime.Collaborate with engineers and production teams to develop new tooling solutions.Perform precision measurements and inspections to ensure tools meet qual

Elkhart, IN 46514 • (43.8 miles) • Full Time • 10/3/2026

POSITION SUMMARYThe Site Quality Engineer applies quality engineering principles, tools, and problem-solving methods to improve product quality, process capability, supplier performance, and customer satisfaction. This role supports the Elkhart site by maintaining compliance with internal quality systems, customer-specific requirements, IATF 16949 expectations, and safe manufacturing practices.ESSENTIAL DUTIESQuality Engineering / Customer RequirementsMonitor internal, customer, and supplier quality performance; identify trends, risks, and opportunities for improvement.Lead or support corrective and preventive actions using effective root cause analysis, containment, verification, and closure methods.Support customer requirements, quality objectives, scorecards, customer portals, capacity

Elkhart, IN 46514 • (43.8 miles) • Full Time • 10/3/2026

Position Summary:We are seeking a dependable Production Workers to support daily production operations in a manufacturing environment. This position involves operating equipment and machines, using air tools, reading measurements, and performing hands-on production tasks. The ideal candidate has good hand dexterity, attention to detail, and a strong commitment to reliable attendance.Responsibilities:Operate production machinery and equipment safely and efficiently.Use air tools and hand tools to complete assigned production tasks.Read and accurately measure materials using a tape measure.Perform hands-on assembly and production work requiring good hand and finger dexterity.Follow work instructions and maintain quality standards throughout the production process.Maintain dependable attendan

Marshall, MI 49068 • (35.2 miles) • Full Time • 10/2/2026

Role Snapshot Join our team as the go-to expert who keeps production running smoothly overnight. This is a night-shift position with flexibility on start and end times. A Night in the Life You start by walking the floor, comparing what you see against schematics and manuals. You listen for the faint change in a motor’s hum, check readings with electrical and electronic test instruments, and confer with managers about any operational quirks that could point to a root cause.When issues surface, you tear down defective equipment with precision measuring instruments and hand/power tools, replace or install parts to blueprint specifications, then bring systems back online. Between calls, you clean and lubricate shafts, bearings, gears, and other moving components to keep everything in peak con

Portage, MI 49002 • (8 miles) • Full Time • 10/2/2026

We get it: job searching takes time and attention. At Kelly®, we’re here to make it a whole lot easier for you. We’re seeking an Assembly Worker to work at a premier manufacturing client in Portage, MI. This opportunity could be the one you’ve been looking for.Location: Portage, MI1st shift:Monday - Friday 5:45 am - 2:15 pm OR Monday - Thursday 5:00 am - 3:30 pm - $18.00/hr2nd shift:Monday - Friday 3:00 pm - 11:30 pm OR Monday - Thursday 4:00 pm - 2:30 am - $20.00/hrWhy you should apply to be Assembly Worker:Opportunity to work with a leading organization known for safety and employee developmentGain valuable experience in a thriving manufacturing environmentSupportive culture and clean, organized workspacesWhat’s a typical day as Assembly Worker? You’ll be:Performing assembly tasks, inclu

Kalamazoo, MI 49009 • (3.3 miles) • Full Time • 10/1/2026

OverviewWe are looking for a talented individual to join our dynamic Keystone Manufacturing team located in Kalamazoo, MI. The Manufacturing Engineer is a motivated, self-starter who will lead and assist in the creation, implementation, maintenance and continuous improvement of manufacturing equipment, processes, systems, and documentation necessary to support production of medical devices for Keystone Manufacturing.The successful candidate must be capable of working with minimal supervision, have a “can do” attitude, possess creative problem-solving skills and be willing to do “whatever it takes” to complete assigned tasks efficiently and effectively. This candidate must have great attention to detail and be highly organized with the ability to multi task with minimum interruption to work

Sturgis, MI 49091 • (34.3 miles) • Full Time • 10/1/2026

Asama Coldwater ManufacturingMaintenance Technician – CNC/PLC/RoboticsDepartment: MachiningJob Type: Full-Time, 3rd Shift 10:30p - 7aFLSA Status: Non-ExemptReports To: Machining EQS LeaderTravel: 0–5%Position Summary As a Maintenance Technician, you will support the performance, reliability, and repair of machining equipment and production systems. This role works across electrical, mechanical, hydraulic, pneumatic, CNC, robotics, and PLC systems to troubleshoot issues, complete preventive maintenance, and help keep production running safely and efficiently.What You’ll Do Troubleshoot and repair CNC machines, robotics, and other production equipmentPerform preventive maintenance to reduce downtime and extend equipment lifeInspect, test, and diagnose mechanical and electrical issuesRepair o

Holland, MI 49423 • (38.2 miles) • Full Time • 10/1/2026

Eyelet Journeyman Toolmaker (4/10s shift) Build the Tools. Solve the Problems. Keep Production Moving. Are you a skilled Eyelet Journeyman Toolmaker who takes pride in precision, problem-solving, and keeping production running at its best?At Trans-Matic, you’ll play a critical hands-on role in developing, troubleshooting, maintaining, and improving tooling and production press equipment. You’ll work alongside other experienced tool and die makers and cross-functional teams to maximize press efficiency, protect part quality, and continuously improve our processes.What You’ll Do Troubleshoot production presses to keep operations running safely and efficiently.Set up jobs and production tooling to meet established quality and performance standards.Develop, maintain, and improve tooling and pr

Holland, MI • (40 miles) • Full Time • 10/1/2026

This job is posted on behalf of Philips Recruiting Services by Top Echelon.Quality Manager – Automotive ManufacturingMust have recent experience leading Quality within a large, complex automotive manufacturing environment.Our client, a well-established automotive manufacturer, is seeking an experienced Quality Manager to lead plant quality operations at a high-volume manufacturing facility. This is an outstanding opportunity for a proven quality leader who enjoys driving continuous improvement, developing high-performing teams, and building strong customer relationships.In this role, you will have a significant impact on plant performance by leading quality initiatives, supporting new product launches, ensuring compliance with IATF 16949 standards, and driving customer satisfaction.What Yo

Grand Rapids, MI 49512 • (40.2 miles) • Full Time • 10/1/2026

Lakeland Monroe Group is a world-class supplier of decorative, precision, and functional plastics for the Automotive Industry. Our team is dedicated to solving your manufacturing challenges. With over 30 years of industry, our team experience we strive to exceed our customer’s expectations, every day. There's never been a more exciting time to work for Lakeland Monroe Group.To achieve our vision of a world class corporation, we need people to join us who are passionate about continuously creating a safer, friendlier and more productive work environment. We are expanding, purchasing new facilities, adding new customers, and embracing growth.Why Work for UsAre you someone with a mechanical aptitude and are not sure where to start? Do you like to work on vehicles, house projects, electrical o

Hudsonville, MI • (40.5 miles) • Full Time • 10/1/2026

Who We AreRoyal is a diverse manufacturer of injection molding, urethane foam and assemblies. We serve the automotive, furniture, and consumer products industries. People who succeed at Royal are those who share the values of our company: Integrity. Stewardship. Teamwork. Hard work. Excellence. We're committed to being the employer of choice. Our goal is to build a culture of commitment where everyone is respected and valued. Where everyone participates. Where everyone matters. We give our employees the responsibility -- and the authority -- to make decisions. We try to provide the best possible work environment. We encourage creativity. We applaud ingenuity. We reward problem solving.What You’ll DoRoyal Technologies is a company that is passionate about training and development. We are lo

Wyoming, MI • (40.8 miles) • Full Time • 10/1/2026

*****This is a 2nd shift job opening***** 4 days a week.Our Grand Rapids, MI machine shop is seeking an experienced CNC Mill Setup/Operator to join our team. We operate Doosan CNC mills and CNC lathes, utilizing MasterCAM for programming. Our shop specializes in prototypes to low-volume production, where every job is unique, requiring adaptability in a fast-paced environment with a focus on quick turnaround and high-quality output. Materials machined include plastic, aluminum, steel, stainless steel, and more.Key Responsibilities:Set up and operate CNC mills (Doosan) to produce precision parts.Work from blueprints, CAD models, or verbal instructions to complete jobs from start to finish.Ensure quality control and adherence to tight tolerances.Collaborate in a dynamic environment to meet fa

Howe, IN • (41.4 miles) • Full Time • 10/1/2026

Local company seeking an experienced tool and die maker with on-site customer service experience. Must be a team player with 5 years of experience with progressive stamping dies, preferable fin stamping dies (HVAC).Job Responsibilities Include:Perform and assist with sharpening, diagnosis, repair, and changeover of stamping dies both in house and at customer locations.Inspect parts and tooling to determine if they are in accordance with prints/work orders.Work from blueprints and sketches to create or modify tools, dies, and jigs.Requirements/skills:Ability to read micrometers, calipers, dial indicators, blueprints, and drawings.Ability to safely operate a variety of tool room equipment (i.e. forklift, lathes, drill presses, mills, grinders, etc.)Ability to follow verbal/written instructio

Elkhart, IN 46514 • (43.8 miles) • Full Time • 10/1/2026

Develop, recommend, and trouble shoot tooling and equipment and manufacturing processes. Ensure new product launch success. Define and implement cost savings and process improvements.Principal Responsibilities:Prepares work to be cost estimated by gathering proposals, blueprints, specifications, and related documents.Evaluates manufacturing processes by designing and conducting research, applying knowledge of product design, fabrications, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operatorsDesign, recommend, and advise on manufacturing tools, fixtures, and fabrication equipment including repair and buildRecommend and purchase CNC cutting tools for process requirements and improvementsDesign and build Locating fixtures, CNC Fixtures, an

Battle Creek, MI • (20.4 miles) • Full Time • 10/1/2026

Adient is seeking a skilled Tool & Die Maker to support our high-volume metal stamping operations. In this hands-on role, you will troubleshoot, maintain, repair, and optimize progressive and transfer dies that are critical to production success. This is an excellent opportunity for an experienced trades professional to work with advanced tooling, earn competitive pay, and contribute directly to manufacturing performance.Essential Duties & ResponsibilitiesTroubleshoot and diagnose tooling and die-related issues in a fast-paced production environment.Perform die set operations and make tooling adjustments to ensure optimal performance and product quality.Conduct preventative and corrective maintenance on metal stamping dies, including progressive and transfer dies.Inspect tooling and finish

Grand Rapids, MI 49512 • (40.2 miles) • Full Time • 9/30/2026

Job Title: Sheet Metal TechnicianReports To: Department Lead Job Purpose This position involves the following: laser operation, forming sheet metal components by brake press, and prepping chamber component for paint.Duties and Responsibilities Loads and unloads delivered sheet metal ontoracks.Bulk sheet metal skidmanagementReads tape measureeasilyIdentifies proper material being used from partslistUses overhead crane to move sheetmetalSelects type of material and quantity from sheet metal cutlistLoads sheet metal onto machine and uses computer to programjobEnsures materials are properlydeburredensure identification of finished pieces with part number that come off thelaserPlaces cut and labeled sheet metal on skid for nextoperationRemoves excess sheet metal from tray/tablebed.Responsible f

Cassopolis, MI 49031 • (33.5 miles) • Full Time • 9/25/2026

The Cultivation Technician role is key to the health and success of our plants! This is a hands-on role, performing repetitive tasks with a keen eye for detail. The ideal candidate has a passion for the cannabis industry, a positive attitude, as well as the ability to follow direction and receive constructive feedback. This is a team, so being able to work well with others is critical. Attendance and flexibility are also extremely important within this role. This can be a physically demanding position, requiring technicians to work on their feet for an eight-hour shift and lift up to 50 pounds. The plants don’t take vacations or days off, so we operate seven days a week, 365 days a year!Job duties will include, but are not limited to: Pruning, manicuring, and watering plants.Transplanting,

Grand Rapids, MI 49508 • (39.5 miles) • Full Time • 9/25/2026

Summary: An energetic and creative role responsible for designing, developing, installing, managing, and maintaining hardware and software systems used to monitor, control, and automate engineering and manufacturing business processes. This blended role requires craft-level skill and agility to deliver controls systems and web-based applications that drive production and operational efficiencies.Essential Duties and Responsibilities include the following. Other duties may be assigned.· System Automation & Development: Design, develop, maintain, and modify new and existing control systems and computer programs to automate specific business processes across all aspects of manufacturing operations.· Cross-Functional Collaboration: Work collaboratively under general supervision with design eng

Holland, MI • (40 miles) • Full Time • 9/25/2026

NightShift CNC Machinist - 4 Days/Week, Paid Lunches, Real WorkLife BalanceProCam Services (Zeeland, MI) is hiring an experienced, selfmotivated CNC Machinist for our Monday–Thursday night shift (paid lunches, 3day weekends). If you’re tired of shops that treat your time like it’s free, you’re going to like it here.Pro-Cam Services LLC is a 38,000 sq. ft. full-service machine shop equipped with CNC mills, CNC lathes and CNC routers. We produce complex machined parts for a variety of industries from Aerospace to Food Processing.Why Machinists Choose ProCAMWe asked our team what makes ProCam different. Here’s what they said:Paid lunches - if you’re here 12 hours, you’re paid for 12 hours.4day work week - long shifts, long weekends.Fast track to 3 weeks’ vacation - plus flexible casebycase ti

Grand Rapids, MI 49507 • (43.4 miles) • Full Time • 9/24/2026

About AmerichemAmerichem is a globally recognized designer and manufacturer of custom color masterbatch, functional additives, engineered compounds, and performance technologies. Our business is built around delivering Performance, Solutions, and Trust through close collaboration with customers seeking to optimize their polymer products. All of our products are backed by complete technical support that ensures quality, reliability, and value.Position SummaryAmerichem is seeking a hands-on and technically strong Controls & Electrical Engineer to support the design, implementation, and commissioning of industrial automation and electrical systems across our manufacturing facilities. This role will focus heavily on PLC programming, electrical controls design, automation integration, and plant

Middlebury, IN 46540 • (43.5 miles) • Full Time • 9/24/2026

Purpose: Maintain and repair of Millroom or other production equipment including saws, CNC routers and other industrial machinery.Duties and Responsibilities:Troubleshoot and Repair Pneumatic, Hydraulic, Electrical and other components of industrial equipment and machinery.Perform Preventative and Predictive Maintenance to minimize production downtime and failuresOrganize and Maintain inventory of critical spares and replacement parts in a designated storage areaInstallation and repair of lift tables and accessoriesTroubleshoot and repair cooperatively with electricians PLC’s in lamination roomsReview and Diagnose failures using blueprints and schematicsWork cooperatively with group leaders to improve machinery reliability and uptimeTroubleshoot and Repair electrical and PLC low voltage wi

Grand Rapids, MI 49512 • (40.2 miles) • Full Time • 9/21/2026

Design and Fabrication Engineer Dolav USA Inc. | Grand Rapids, Michigan | On site | Full time, exemptThe short versionWe make heavy duty plastic bins, pallets, and bulk containers, and then we change them. A food processor needs a drain in a different place. A recycler needs a door cut where there isn't one. A distributor calls with a rough sketch and a deadline. Someone has to turn that into a real design, price it honestly, and walk it out to the floor to make sure it gets built right.That someone is you. This is not a role where you model in isolation and email a drawing over the wall. You will be on the phone with customers, at the bench with our fabrication techs, and in SolidWorks, often in the same afternoon. If that sounds like a good day, keep reading.What you will actually doDesi

Charlotte, MI 48813 • (44.3 miles) • Full Time • 9/20/2026

Michigan Can Lines is seeking a skilled and detail-oriented Decoration Technician to support the decoration process of aluminum cans. The Decorations Technician will be responsible for ensuring the efficient operation of printing and decorating equipment, performing quality checks, and supporting the decorating team to meet production targets. This role requires technical expertise in the decoration process, a strong focus on quality, and a commitment to safety and continuous improvement.Responsibilities:Operate and maintain can decorating machinery, including printing presses and label applicators, ensuring optimal performance throughout the production process.Monitor the decoration process, ensuring printed cans meet company quality standards and customer specifications.Perform regular q

Kalamazoo, MI • (2.8 miles) • Full Time • 9/19/2026

This job is posted on behalf of Welsh & Associates, Inc. by Top Echelon.Design Precision. Master Flow.Manufacturing EngineerOpportunity Overview: In specialized, high-precision manufacturing, the gap between a design and an exceptional finished product is bridged by true manufacturing engineering. At Our Client, an established operation in the Greater Kalamazoo area, continuous innovation and technical excellence drive daily operations. This mandate exists to take full process ownership across a high-mix, low-volume production environmentinfluencing product lifecycles from initial manufacturability reviews straight through to final assembly line layout and optimization. For an experienced engineer who thrives on hands-on technical problem-solving, this role offers an ideal balance of CAD l