Please Accept our Privacy Policy
Sprung Services, Inc.
Benson, MN 56215 • (26.3 miles) • Full Time • $27.00 to $30.00 / hr • 11/20/2026
Department: Maintenance Compensation: Starting at $27.00 per hour, depending on experience Advancement opportunities available Position Overview We are seeking a Controls Programmer Trainee to support industrial automation, process controls, instrumentation, and maintenance operations. This position will involve learning and working with Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), and related control system hardware and software. Training will be provided. Essential Duties and Responsibilities Learn, maintain, program, and install Distributed Control System (DCS) hardware and logic. Create, modify, and maintain DCS graphical Human-Machine Interface (HMI) systems. Factory training will be provided. Install and program Programmable Logic Controllers (PLC) and modChippewa Valley Ethanol Company, LLLP
Benson, MN 56215 • (26.3 miles) • Full Time • $27.00 / hr • 11/20/2026
Department: Maintenance Reports To: Maintenance Manager ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Responsible for learning, maintaining, programming, and installing Distributed Control System (DCS) hardware and logic. Also creates, modifies, and maintains DCS graphical (HMI) interface. CVEC will provide DCS factory training. Performs Programmable Logic Controller (PLC) installations and programming. Modifies existing PLC logic to facilitate new equipment and instrumentation installation Maintains, installs, and modifies Control System Network physical layer. Control System Network is physically separate from Office LAN. Includes fiber optic and copper cabling along with switches and media convertors. Works with Operations group to provide PISpecSys
Granite Falls, MN 56241 • (15.3 miles) • Full Time • $18.00 to $25.00 / hr • 11/20/2026
FLEXIBLE SCHEDULE including 4 10-hour shifts and 5 8-hour shifts with flexible start times! Here is your chance to showcase your skills with an established, yet growing, company that's been in business for over 25 years! We offer a variety of challenging work that plays to each employee's strengths. Check us out at Pay in accordance applicable experience, ranging from $18 to $25 an hour BENEFITS: Medical Insurance, Health Savings Plan (HSA), Flexible Spending Plans (Dependent and Medical), Accident Insurance, Critical Illness, Short-Term Disability, Long-Term Disability, 401(k) with an employer match, Term Life Benefits, Employee Assistance Program (EAP), Employee-of-the-Month, Employee-of-the-Year, Onsite Welding Training and Qualifications, Employee Luncheons, Employee Picnics, CommunityCustom Products Of Litchfield,
Litchfield, MN 55355 • (41.5 miles) • Full Time • $19.00 to $21.00 / hr • 11/18/2026
You'll work on the paint line, in assembly, or in metal fabrication operating a machine, weld, warehouse, wherever you're needed and your skills predicate. You'll have the opportunity to learn several different positions with varying responsibility. All while you keep a clean safe work area. Company Description Custom Products of Litchfield (CP) has been manufacturing cabs and ROPS for OEMs for over 60 years. CP is a vertically integrated manufacturer of cabs and protective structures of operator-controlled work equipment. CP offers competitive benefits, including a 4% 401(k) match. We're looking for great people to take us to the next level! CP pays for experience. Neither end of the pay scale is firm. Company Description Custom Products of Litchfield (CP) has been manufacturing cabs andQUASENT INC
Benson, MN 56215 • (26.3 miles) • Full Time • $40.00 to $50.00 / hr • 11/14/2026
Benefits: Competitive salary Flexible schedule Training & development Title: Mechanical Manufacturing Engineer Years of Experience: 5+ years Education: BS/BE in Mechanical / Mechatronics Engineering Location: Benson, MN Duration: 12+ month contract Worth Authorization: U.S. Citizen or Green Card Forward Resumes To: Role Summary Responsible for mechanical concept development, design, equipment selection, detailed engineering, supplier coordination, installation, commissioning, and troubleshooting of manufacturing automation equipment and systems. Key Responsibilities Develop mechanical concepts for manufacturing automation, robotic cells, assembly lines, material handling and SPMs. Prepare 2D/3D layouts, concept designs, detailed designs and manufacturing drawings. Design: Machine frames anThe Specialty Manufacturing Company
Granite Falls, MN 56241 • (15.3 miles) • Full Time • $25.00 to $35.00 / hr • 11/13/2026
The Specialty Mfg. Co. is large enough to produce standard products at scale, yet flexible enough to deliver superior quality, custom products at competitive prices. No day is the same here and everyday has new opportunities. The Role: Responsible for end-to-end setup and precision machining on Multi-Spindle/Multi-Turret equipment. You will work in a clean, well-ventilated facility where efficiency and safety are paramount. Facility adheres to ISO certification. Key Responsibilities Blueprint & Process: Interpret complex prints to determine the most efficient manufacturing methods to produce parts to the engineered specification. G&M Code: Navigate and understand lines of code required for part production. Turret & Tooling: Set up appropriate tooling/holders within multiple turrets; "touchBaillow Recruiting LLC
New London, MN 56273 • (31.8 miles) • Full Time • $90,000 to $125,000 / yr • 11/13/2026
Are you a skilled engineer with a passion for leading complex projects and advancing cutting-edge technology? We’re seeking a Senior Process Engineer to join a dynamic team in New London, MN. This is your chance to play a key role in shaping the future of food equipment innovation. If you're looking for a challenging, rewarding position with hybrid work flexibility, this could be the perfect opportunity for you! What You’ll Be Doing: Lead Engineering Efforts: Oversee all aspects of engineering for your assigned projects, including process, structural, and mechanical engineering. Project Coordination: Collaborate closely with project management and design teams to drive projects through design phases and into commissioning. Technical Oversight: Ensure timely completion of critical tasks, suLoftness Specialized Farm Equipment
Hector, MN 55342 • (34.6 miles) • Full Time • $22.00 to $24.00 / hr • 11/13/2026
Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance Loftness Specialized Equipment, a 100% employee-owned company, has been designing and manufacturing high-quality agricultural and vegetation management equipment for over 70 years. Our product lines include vegetation management equipment, crop shredders, grain bagging systems, and other specialized solutions used by professionals across North America. At Loftness, we take pride in our commitment to innovation, quality, and the people behind our products. As an employee-owned company, every team member has a vested interest in our customers’ success and the success of the business. A Quality Control Inspector performs assessment, documentation and organization tasks to support the quality andNew Flyer
Willmar, MN • (18.9 miles) • Full Time • 11/12/2026
New Flyer is North America’s heavy-duty transit bus leader, providing sustainable mobility solutions through transit buses, technology, and infrastructure. New Flyer is a subsidiary of NFI Group, a leading independent bus and coach manufacturer and a leader in electric mass mobility solutions. Building on its 90+ year legacy of innovation, New Flyer is the only manufacturer offering all three types of zero-emission transit buses, with over 1,900 zero-emission buses delivered to date. Proudly serving all 25 of the largest transit agencies in North America, New Flyer actively supports over 35,000 heavy-duty transit buses, currently operated by approximately 500 agencies. 2nd Shift Monday through Thursday 4:00pm to 2:30am Must be able to train on days for up to 90 days Monday through Friday 6ATZ Manufacturing
Marshall, MN 56258 • (40.6 miles) • Full Time • $18.00 to $35.00 / hr • 11/10/2026
Benefits: 401(k) matching Competitive salary Dental insurance Flexible schedule Health insurance Paid time off Vision insurance ATZ Manufacturing is a family-owned manufacturing business that started in 2008. Our product line started with the Action Trackchair and has grown to include other tracked/mobility products, as well as other outside work done for customers. We pride ourselves on providing the highest individual service to our customers. We have top shelf equipment for Laser Cutting, Computerized Press Brake, Powder Coating, Sandblasting/Wheel-a-brator, Robotic Welding, Tube Bending, Machining, Shearing, Rolling, Custom Design (SolidWorks). We are looking for a skilled and detail-oriented Fabricator to join our manufacturing team. The fabricator will be responsible for constructingChandler Industries LLC
Montevideo, MN 56265 • (16.6 miles) • Full Time • 11/9/2026
Description: We’re Growing - Join the Momentum at Chandler Industries! Chandler Industries is growing, and we’re looking for skilled CNC Machinists to grow with us!!! If you’re looking for stability, opportunity, and a company that’s moving forward - come grow with us. Work on complex parts using state of the art equipment. Join a culture that promotes collaboration, teamwork, and development. Flexible working hours, prioritizing work-life balance, ensuring a healthy lifestyle. Continuously improve your skills and knowledge to stay up to date with advancements in machining technology, providing you with ongoing opportunities for growth and professional development. About Chandler Industries Chandler Industries is a premier contract manufacturer specializing in precision machining, EDM, sheCavco Manufacturing LLC
Montevideo, MN 56265 • (16.6 miles) • Full Time • 11/8/2026
ESSENTIAL DUTIES & RESPONSIBILITIES Develops accurate and complete production drawings, and vendor drawings for assigned models and/or projects. Keeps abreast of current Drafting Standards to maintain market continuity. Maintains the library of production drawings to ensure a central source of current reference information is available and accessible to all departments. Perform other duties as assigned. MINIMUM QUALIFICATIONS High School Diploma with Drafting Fundamentals exposure One or more years of manufacturing assembly experience or one or more years of drafting experience Strong computer skills and understanding of relevant software packages Strong mechanical skills Motivated self-starter with a strong tolerance for change The hiring range for this position is 57,000 - $60,000 annualLarson Engineering
Granite Falls, MN 56241 • (15.3 miles) • Full Time • $160,000 to $170,000 / yr • 11/7/2026
Build your future on our foundation of excellence! Are you looking for a rewarding career opportunity that also gives you a stake in a company's performance as an employee-owner? Larson Engineering, Inc. has a long-standing record of success since its establishment in 1979 and is a recipient of the PSMJ A/E/C Employer of Choice award. Larson is an Equal Opportunity Employer and wants to remove any barriers to employment, so if you have any accommodation needs as part of the application or interview process, please let us know. About the Role We're seeking a seasoned Electrical Engineering Department Manager to lead our electrical engineering team and drive technical excellence, project delivery, and business growth. This is a high-impact leadership role for a technical expert who thrives iTemporary Climate Solutions Inc
Glenwood, MN 56334 • (43.2 miles) • Full Time • $19.00 to $25.00 / hr • 11/7/2026
Temporary Climate Solutions is a growing manufacturer of temporary heating and climate control equipment. We build equipment used across construction, industrial, commercial, and agricultural industries throughout North America. We are looking for dependable, motivated individuals to join our production team as Mechanical Assemblers. Job Summary Mechanical Assemblers are responsible for assembling heating and climate control equipment using hand tools, power tools, and assembly drawings. This position works closely with other production team members to ensure equipment is built safely, efficiently, and to company quality standards. Responsibilities Assemble mechanical components and equipment Read and follow assembly drawings and work instructions Use hand tools, power tools, and measuringWald Manufacturing Inc
Brooten, MN 56316 • (38.9 miles) • Full Time • $24.00 to $35.00 / hr • 11/3/2026
CNC Machinist / Programmer / Operator$24–$35 per HourBrooten, Minnesota$3,000 Hiring Bonus Precision Manufacturing, a division of Wald Manufacturing, is looking for an experienced CNC machinist to join our team in Brooten, Minnesota. This is a full-time position paying $24–$35 per hour based on experience and ability. We offer a $3,000 hiring bonus, health insurance, paid vacation, free online doctor visits, on-the-job training, and opportunities to advance within the company. The position includes programming, setting up, and operating 3-axis vertical milling machines and a CNC lathe with mill-turn capabilities. Our equipment uses Haas and Fanuc controls, with most programming completed through Autodesk Inventor CAM. Applicants should understand CNC machining, setups, tooling, work offsetBayer Built Woodworks
Belgrade, MN 56312 • (40.3 miles) • Full Time • $26.00 / hr • 10/31/2026
Job Posting TitleProduction Team Member - Second Shift Job Description Bayer Built Woodworks is a premier manufacturer and distributor of high-quality interior and exterior doors, millwork, and stair systems. As a family-owned company based in Minnesota, we proudly serve the Midwest with industry-leading service, exceptional craftsmanship, and a deep commitment to customer success. Our team is passionate about providing reliable products and outstanding support to builders, dealers, and homeowners alike. At Bayer Built, we believe our people are the foundation of our continued success, and we’re dedicated to fostering a culture of integrity, safety, and growth. THE QUICK DETAILS: Job Type: Full-time Pay: Starting at $26 Hours: Sunday - Thursday 4:00 PM - 12:30 AM; Scheduled working hours aWarner Manufacturing Company
Sacred Heart, MN 56285 • (11.8 miles) • Full Time • $15.00 to $16.00 / hr • 10/31/2026
About the Role: The Operator Plastics night shift - assembly position is crucial for ensuring the efficient production of high-quality plastic components. This role involves operating machinery and equipment to assemble products according to specifications and quality standards. The successful candidate will be responsible for monitoring the production process, troubleshooting any issues that arise, and maintaining a clean and safe work environment. Attention to detail and adherence to safety protocols are essential to minimize waste and ensure the integrity of the products. Ultimately, this position plays a vital role in meeting production targets and contributing to the overall success of the manufacturing team. Minimum Qualifications: High school diploma or equivalent. Previous experienNova-Tech Engineering
Willmar, MN 56201 • (18.7 miles) • Full Time • 10/31/2026
CNC Machinist Pay Range: $26 - $32/Hour Who is Nova-Tech Engineering? Headquartered in Willmar, MN, Nova-Tech Engineering is a growing, dynamic company founded in 1992 that began as one person’s passion to benefit the agricultural industry. Through innovative process automation technology, the company engineers and manufactures products that serve over 500 commercial poultry hatcheries in over 65 countries worldwide. Nova-Tech houses every aspect of its business on the MinnWest Technology Campus, including a manufacturing facility located just steps away from our engineering and drafting teams. Walking from building to building, you can observe our whole process, from concept to final product. What we’re looking for: Set up and operate CNC machines to produce quality parts accurately and eKatalyst Healthcares & Life Sciences
Benson, MN 56215 • (26.3 miles) • Full Time • 10/30/2026
Job Description: We are looking for a Control Engineer to troubleshoot and resolve control system issues in real time and implement permanent solutions. The candidate will support automated assembly systems, process control software, machine vision inspection, and PLC/HMI integration. Please prioritize candidates with hands-on experience in Proplanner, Pivotware, and Detect-It vision inspection systems . Key Responsibilities: Author, configure, and deploy Pivotware process control modules to guide operators through complex assembly steps. Integrate DC electric torque tools, scanners, and pick-to-light systems with the Pivotware platform. Use Proplanner to manage Manufacturing Bills of Materials (MBOMs), routing, and time studies, ensuring accurate data flow to the shop floor. Design and inInfo Way Solutions LLC
Minneota, MN • (40.7 miles) • Full Time • 10/30/2026
Location Minneapolis, MN Contract - 1 year Bill Rate: 60 per hour HCL Tech client is Healthcare in Minneapolis Pls check the attached JD for Process validation Engineer-injection molding requirement. Its for Minneapolis. Pls share any suitable profiles for the same. Pls note that, due to current internal policies, we can consider only US citizen or Green card candidates profiles only and the buy rate should be around 60 $/hr. Please share candidates with any of these backgrounds in Mechanical Engineering, Industrial Engineering, Electrical Engineering, Automobile Engineering, Biomedical Engineering, or related fields instead. Not in Computer science. ----------------------------------------------------------------------------------------------------------- Job description is enclosedRelco
Willmar, MN 56201 • (18.7 miles) • Full Time • $22.00 to $26.00 / hr • 10/28/2026
Automation Engineer Intern Job Description STATUS: Non-Exempt / Hourly DEPARTMENT: Automation HOURS: Monday – Friday, average of 45 hours per week REPORTING RELATIONSHIPS Reports to: Automation Engineer Supervisor Supervise: N/A PURPOSE OF THE JOB This position allows an internship to provide an opportunity to gain additional knowledge and skills in this area of interest at RELCO, build professional relationships, and develop an understanding of the manufacturing process. SUMMARY OF KEY ACCOUNTABILITIES Accountable to advise on all aspects related to the quoting and/or sales order to communicate with customer. Accountable to read and interpret electrical drawings. Accountable to carry out project duties that minimizes stress for onsite commissioning. Accountable to follow safety standards.Vaxxinova US
Willmar, MN 56201 • (18.7 miles) • Full Time • $23.00 to $28.00 / hr • 10/27/2026
Vaxxinova US is seeking a Quality Associate to join our team in Willmar, Minnesota. About the role: The Quality Associate is responsible for providing the link between Quality Control and Quality Assurance. This role will report to Quality Assurance and Regulatory but have ample interactions with Quality Control. This role is responsible for review of QC testing documents, testing summary creation for all intermediate and final products including 2008 preparation for serial release, and approval of daily vaccine shipments. Main responsibilities: Review QC testing documentation. Work closely with QC technicians and management to resolve errors or omissions and ensure incidents and deviations are documented appropriately. Prepare testing specification summaries for all intermediate productsPALS
Willmar, MN 56201 • (18.7 miles) • Full Time • 10/26/2026
PALS is seeking a full-time Electronics Service Technician to join their team. An Affiliate of Life-Science Innovations, PALS (Poultry and Livestock Supplies) is a retailer and service provider of equipment, feed, and medication distributed within the poultry and hog industry, located on the West side of Willmar, MN Are you looking for a change in careers, wanting to learn something new, this might be for you. We will train you to tackle the responsibilities of this position. Summary of Responsibilities: Working in the Electronics Department and at customer locations, identify and resolve controller malfunctions. Adjust and replace defective or improperly functioning circuitry and electronics components, using common electronics testing tools, hand tools, and soldering iron. Accurate and tPower System Engineering Inc
Prinsburg, MN 56281 • (9.9 miles) • Full Time • $113,193 to $187,962 / yr • 10/24/2026
People + Problem Solving = Progress Excellence Through People! Take your engineering career to the next level by working with energetic, talented, and forward-thinking colleagues and clients who invest in the collective good, take a balanced approach to sustainable solutions, are flexible to the realities of complex changes, and provide genuine effort to do the right by others. What We Are Looking For: As a Senior Renewable Electrical Engineer to joining our growing renewables team and lead the design and execution of utility-scale solar projects. This is an exciting opportunity to join a growing team and a culture that promotes continual employee growth and development. Preferred to have someone hybrid at one of our PSE offices, but open to remote candidates. What You Will Be Doing: CoreWillmar Poultry Farms
Willmar, MN 56201 • (18.7 miles) • Full Time • 10/24/2026
Willmar Poultry Farms is seeking a full-time Poult Scheduler . An Affiliate of Life-Science Innovations, Willmar Poultry Farms is a commercial grow out company who grows turkeys for various customers, with farms located in the central MN areas. Summary of Core Responsibilities: The Poult Scheduler is responsible for coordinating and managing poult placements from hatchery to farms, ensuring the efficient and timely placement of poults while maintaining strong communication with growers, hatchery personnel, transportation teams, and internal operations. This role plays a critical part in aligning poult supply with production needs, managing placement schedules, developing transportation plans, and responding to changing operational conditions, including disease-related regulatory requiremenKonik
Litchfield, MN 55355 • (41.5 miles) • Full Time • 10/24/2026
Manufacturing & Design Engineering Manager Litchfield, MN | $90,000-$100,000 | Direct Hire | 100% Onsite Konik is partnering with a manufacturing organization in the plastics industry seeking a Manufacturing & Design Engineering Manager to lead product development, engineering design, manufacturing support, and quality improvement initiatives. Manufacturing & Design Engineering Manager Responsibilities Lead new product development from concept and design through prototyping, testing, and production implementation. Design and develop molds, mechanical components, and product enhancements using SolidWorks 2D/3D modeling. Manage engineering projects, including schedules, technical documentation, design reviews, bills of materials, cost estimates, and product specifications. Partner with ManufDiamond Energy Systems, Inc
Marshall, MN 56258 • (40.6 miles) • Full Time • 11/20/2026
Starting at $24.00 per hour Pay increases are based on performance, experience, and advancement within the company. No insulation experience is required. We will provide on-the-job training for the right candidates. Diamond Energy Systems is currently seeking motivated individuals to join our team as Pipe & Duct HVAC Insulators in Marshall, MN . This is a full-time, permanent position with excellent opportunities for growth and advancement within our company. Key Responsibilities: Install fiberglass, foam, rubber, and other insulation materials on piping, ductwork, and mechanical systems Measure, cut, fabricate, and fit insulation materials according to project specifications Install metal and PVC jacketing to protect insulated systems Read and interpret blueprints, drawings, and work ordeCarlson & Stewart Refrigeration
Marshall, MN • (40.9 miles) • Full Time • 10/29/2026
Ammonia Refrigeration Service Technician Marshall, MN & Sauk Rapids, MN Full-Time | Hourly, Based on Experience Carlson & Stewart Refrigeration, Inc. Join Our Team Carlson & Stewart Refrigeration is a design-build contractor specializing in commercial and industrial refrigeration systems across the Upper Midwest. We’re looking for full-time Ammonia Refrigeration Service Technicians in our Marshall and Sauk Rapids, MN offices. If you're motivated to solve problems, work with a variety of equipment, and provide excellent service, we want to hear from you. What You’ll Do - Maintain, diagnose, and repair Ammonia/NH3 refrigeration systems. - Troubleshoot mechanical and electrical issues with high accuracy. - Perform system installations, repairs, and preventive maintenance. - Deliver excellentArby's
Willmar, MN 56201-4244 • (18.9 miles) • Full Time • 11/9/2026
Nos alegra que ests aqu. Pinsalo: t y nosotros? Parece que podramos ser una pareja perfecta en el paraso de la carne. Si ests aqu por: Papas fritas rizadas con descuento (y todos los artculos de nuestro men, de hecho) Horario flexible Comidas gratuitas por turno* La mejor capacitacin en su clase y aprendizaje continuo Oportunidades de progreso Tiempo libre remunerado* Plan de jubilacin 401(k)* Beneficios de matrcula* Mdico, dental y de la vista* Campeones de la esperanza* Programa de recomendacin de efectivo Herramienta de apoyo para el bienestar en el viaje Programa de descuentos PerkSpot Programa de reconocimiento Programas de calzado antideslizante Participacin comunitaria y caritativa Programa de subvenciones Encendiendo sueos Concursos de entrenamiento Bueno, ests en el lugar correctoPLUNKETT'S PEST CONTROL, INC
Willmar, MN • (18.9 miles) • Full Time • $20.00 to $22.00 / hr • 11/12/2026
Plunkett's – Own Your Route – Set Your Schedule – Grow Without Limits At Plunkett's, our technicians do more than treat pests. They solve problems and help customers feel safe and comfortable. As a Service Technician, you'll manage your own route, provide pest control services, and build strong customer relationships. __________________________________________________________________________________________________________________________ Training Pay is $20.00 - $22.00 Per Hour + Uncapped Sales Incentives! What Makes This Role Different You set your schedule Flexible hours mean you work when it makes sense. No micromanaging, no fixed 9-to-5. Plan your day, prioritize stops, and build lasting client relationships. Your own territory Manage a defined route that's yours to build. Your relatiWayne Transports,Inc
Marshall, MN 56258 • (40.6 miles) • Full Time • 11/5/2026
DESCRIPTION: Wayne Transports is a family-based, performance-driven trucking company focused on customer service, employee satisfaction, safety and hard work. We haul Asphalt, Ag products, Chemical, Dry Bulk, Petroleum, and Propane. As a service technician you will perform a variety of mechanical repairs to ensure Wayne Transports Trucks and other company vehicles, are running at a high-performance level and are in safe and working condition. SHIFT: Monday-Friday, 8:00 - 5:00pm - Occasional Saturday. RESPONSBILITES: Determines vehicle condition by conducting inspections and diagnostic tests; identifying worn damaged parts. Reviews, completes or assigns repairs identified on Driver Vehicle Inspection Reports. Conducts safety checks on vehicles. Recognize and complete preventive maintenanceAquarius Home Services
Redwood Falls, MN 56283 • (31.5 miles) • Full Time • $23.00 to $25.00 / hr • 10/30/2026
Job Title: Water Service Technician Department: Water Service Reports to: Service Manager FSLA Status: Non-exempt Summary: The essential function of the Water Service Technician is to provide general maintenance and repair services for installed water conditioning equipment. Perform and produce based on company core values . Uncompromised Customer Service Unwavering Accountability Contagious Positive Culture Collaborative Utilize the Core Focus of Company Earning the right to be recommended Core Roles & Responsibilities: Follow Nexstar Process Water personal metrics Follow all local codes Personal reviews LTO/STO conversion Essential Duties and Responsibilities include the following. Other duties may be assigned. Strategic Work: Handles service calls to customers in their homes, businessesDuininck Concrete
Willmar, MN 56201 • (18.7 miles) • Full Time • 11/6/2026
Duininck is a fourth-generation, 100-year family-led company focused on building strong communities through our relationships with customers, employees, subcontractors and vendors. We have a diverse portfolio of businesses managing projects at any scale. Duininck Concrete, headquartered in West Central Minnesota, serves its clients as industry experts, providing guidance and support for projects of any scale. This year round, full-time position comes with a strong benefits package including: Competitive pay range of $80,000 to $105,000 per year, based on experience Paid Time Off Strong Health Plans to choose from Dental & Vision Plans, Company Paid Life insurance & Short-Term Disability Position specific personal protective equipment provided 401K with company match, and more! This positioLife-Science Innovations, LLC
Willmar, MN 56201 • (18.7 miles) • Full Time • 11/19/2026
Farm Service Elevator has a full-time opportunity in the role of Mill Operator . An affiliate of Life-Science Innovations, Farm Service Elevator processes 6.5 million bushels of corn to manufacture over 350,000 tons of poultry feed sold primarily to commercial farms and independent poultry growers throughout Minnesota. $2000 Sign-on Bonus!! Summary of Responsibilities: Responsible for making safe, quality feed including but not limited to: Ensure feed is batched and pelleted correctly Ensure medication is added to feed correctly Ensure downstream ingredients are applied correctly Ensure finished feed is stored correctly Filling bins with correct bagged ingredients Ensure housekeeping and preventative maintenance is completed Responsible for completing logs according to SQF code Willing toAmerican Welding And Gas
Willmar, MN 56201 • (18.7 miles) • Full Time • 11/16/2026
Fill Plant Operator (6551) - American Welding & Gas American Welding and Gas, Inc. has an immediate opening for a Fill Plant Operator at our gas cylinder production/distribution facility in Willmar MN! NO EXPERIENCE NECESSARY! Entry Level Position: Position Summary: This position will have the primary responsibility for the manufacturing of compressed gas and liquid products, which includes pre-fill inspection of cylinders, filling, labeling and analysis or quarantine of cylinders prior to release for shipment. In this role, the ideal candidate must also move and store cylinders and may load/unload cylinders for transport. Incentives: Competitive Pay. Medical, Dental, & Vision Benefits. Company Provided Short-term & Long-term Disability. Company Provided Life Insurance. 401(k) Retirement SIntegrated Power Services
Litchfield, MN 55355 • (41.5 miles) • Full Time • 11/14/2026
Why IPS? If you're searching for a place where you can grow, continue learning, and make a meaningful impact while still having time for the people and moments that matter most, welcome to Integrated Power Services! We believe your value extends far beyond your job title because the best work comes from people who feel supported, challenged, and fulfilled both professionally and personally. Here, you'll find opportunities to develop your career, work alongside exceptional teammates, and be part of a culture that recognizes that your life is worth just as much as your work-if not more. Because when people thrive, businesses thrive. If that sounds like the kind of place you've been looking for, we invite you to join us! Benefits: Paid Time Off (PTO). 401k Employer Match. Bonus Incentives. ExREMINGTON SEEDS LLC
Olivia, MN 56277 • (22.7 miles) • Full Time • 11/8/2026
Description: Treater Operator The Treater Operator works closely with the Conditioning Supervisor, Conditioning Operator and Plant Operations Manager to ensure that all treated seed meets the customer quality requirements. Other essential job functions may include but not limited to: Performing work activities safely. Knowledgeable on Personal Protective Equipment (PPE) requirements. Accurately mixing seed treatment chemicals to ensure proper seed coverage. Maintaining an accurate seed treatment inventory. Knowledgeable on operation of seed treating equipment. Follow all Quality Management System processes and procedures. Thoroughly cleaning all equipment between conditioning runs in order to maintain product integrity. Lifting and stacking materials up to 68 lbs. for extended periods of tRalco Agriculture
Marshall, MN 56258 • (40.6 miles) • Full Time • $17 / yr • 11/3/2026
Job Description Bagging Automation Operator Department/Division: Operations Pay Status: Full-time; Non-exempt Production Pay Level : 2 Reports to: Hahn Plant Production Supervisor Effective Date: June 2026 Job Summary Bagging Automation Operators are responsible for ensuring that a company's products or services are produced in a timely and efficient manner, focusing on the bagging and packaging process of finished product. They are trained in operating, controlling, and maintaining high-speed sophisticated machines and equipment that are used in manufacturing products. This job description is not meant to be all inclusive and duties may vary based on departmental and company needs. Job Responsibilities Correctly run and troubleshoot palletizing equipment. Obtain and record samples, tote wRVI
Redwood Falls, MN 56283 • (31.5 miles) • Full Time • $16.00 to $18.00 / hr • 11/20/2026
Showcase your skills with an established, yet growing, company that's been in business for over 29 years! At RVI, we offer exciting, challenging work tailored to your strengths, along with opportunities to make an impact. Learn more about us at and apply today! FLEXIBLE SCHEDULE including 4 10-hour shifts and 5 8-hour shifts with flexible start times! SALARY RANGE: $16.00 to $18.00 per hour BENEFITS & PERKS: Medical, Dental, & Vision Insurance; HSA/FSA options; Accident & Critical Illness Insurance; Short- and Long-Term Disability; 401(k) with Employer Match; Term Life Insurance; Employee Assistance Program; Employee-of-the-Month and Year, RITALKA University; Employee Luncheons; Community Volunteering As a Wire Harness Assembler , your primary responsibility is repairing, assembling and teK&M Manufacturing
Olivia, MN • (22 miles) • Full Time • 11/18/2026
Who We Are: Founded in 1958, K&M Manufacturing Co., originally K&M Manufacturing and Repair, pioneered with toolboxes and steps, transforming agricultural practices. Our expansion into tractor seats marked the inception of a product line now exceeding 3,500 innovative items, ranging from seats and suspensions to mirrors and warning light systems. Tailored for leading tractor and mower brands, our 32,000 sq. ft. production space and over 40,000 sq. ft. warehouse cater to diverse field needs, reflecting our commitment to innovation and quality since inception. Why Choose K&M? We provide an industry leading benefits package to cover healthcare, retirement, and wellness programs to help you be your best self financially and physically. On top of that, we have: Competitive Pay: $18.00 - $20.00SpecSys
Granite Falls, MN 56241 • (15.3 miles) • Full Time • $20.00 to $25.00 / hr • 11/20/2026
Join an Established and Growing Team! Showcase your skills with a company committed to providing services ON TIME, ON BUDGET, DONE RIGHT, and DONE SAFELY. At SpecSys, we offer exciting, challenging work tailored to your strengths, along with opportunities to make an impact. Learn more about us at and apply today! FLEXIBLE SCHEDULE including 4/10-hour shifts and 5/8-hour shifts with flexible start times! SALARY RANGE: $22.00 to $28.00 per hour, dependent on experience BENEFITS & PERKS: Medical, Dental, & Vision Insurance; HSA/FSA options; Accident & Critical Illness Insurance; Short- and Long-Term Disability; 401(k) with Employer Match; Term Life Insurance; Employee Assistance Program; Employee-of-the-Month and Year, On-site Welding Training and Certifications; RITALKA University; EmployeeLoftness Specialized Farm Equipment
Hector, MN 55342 • (34.6 miles) • Full Time • $24.00 to $26.00 / hr • 11/4/2026
Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance Loftness Specialized Equipment, a 100% employee-owned company, has been designing and manufacturing high-quality agricultural and vegetation management equipment for over 70 years. Our product lines include vegetation management equipment, crop shredders, grain bagging systems, and other specialized solutions used by professionals across North America. At Loftness, we take pride in our commitment to innovation, quality, and the people behind our products. As an employee-owned company, every team member has a vested interest in our customers’ success and the success of the business. Job Summary: Responsible for supporting product design activities including developing new designs and/or improviATZ Manufacturing
Marshall, MN 56258 • (40.6 miles) • Full Time • $65,000 to $85,000 / yr • 11/1/2026
ATZ Manufacturing is a family-owned manufacturing business that started in 2008. Our product line started with the Trackchair and has grown to include other tracked/mobility products, as well as other custom fabrication work done for customers. We pride ourselves in providing the highest individual service to our customers. We have top notch team members and top shelf equipment for Laser Cutting, Computerized Press Brake, Powder Coating, Sandblasting/Wheel-a-brator, Robotic Welding, Tube Bending, Machining, Shearing, Rolling, Custom Design (SolidWorks). The Electro-Mechanical Engineer will be responsible for designing, developing, testing, and improving electro-mechanical products and systems. This position works closely with internal teams to develop reliable, cost-effective, and manufactBayer Built Woodworks
Belgrade, MN 56312 • (40.3 miles) • Full Time • $21.00 to $24.00 / hr • 10/31/2026
Job Posting TitleProduction Team Member (1st Shift) Job Description Location: Belgrade, MN, USA Bayer Built Woodworks is a premier manufacturer and distributor of high-quality interior and exterior doors, millwork, and stair systems. As a family-owned company based in Minnesota, we proudly serve the Midwest with industry-leading service, exceptional craftsmanship, and a deep commitment to customer success. Our team is passionate about providing reliable products and outstanding support to builders, dealers, and homeowners alike. At Bayer Built, we believe our people are the foundation of our continued success, and we’re dedicated to fostering a culture of integrity, safety, and growth. THE QUICK DETAILS: Job Type: Full-time Pay: Starting at $21 -$24 Hours: Monday-Friday, start time betweenRelco
Willmar, MN 56201 • (18.7 miles) • Full Time • $66,470 to $89,930 / yr • 10/28/2026
PROCESS ENGINEER Location Stratford WI or Willmar MN Onsite, Hybrid or Fully Remote Onsite/Hybrid Hybrid / Remote Status Full-time Reports To Process Engineering Manager FLSA Status Exempt Management Position No Compensation POSITION OVERVIEW This position will apply engineering principles to design, analyze, optimize, and support industrial food and dairy processing systems. The role supports liquid and cheese projects from conceptual design through commissioning and startup, working closely with customers, regulation authorities, sales, project management, mechanical design, automation, manufacturing, and field teams. RESPONSIBILITIES: Sales Support Participate in audits and process reviews of customers ’ existing process lines Collaborate on conceptual design of cheese process accordingWarner Manufacturing Company
Sacred Heart, MN 56285 • (11.8 miles) • Full Time • $18.00 to $23.00 / hr • 10/24/2026
About the Role: The Injection Molding Technician plays a critical role in the manufacturing process by setting up, operating, and maintaining injection molding machines to produce high-quality plastic parts. This position ensures that production runs efficiently, meeting both quality standards and production schedules. The technician will troubleshoot and resolve equipment issues, perform routine maintenance, and make necessary adjustments to optimize machine performance. Collaboration with quality control and engineering teams is essential to implement process improvements and maintain compliance with safety and regulatory standards. Ultimately, this role contributes to the overall success of the manufacturing operation by delivering consistent, defect-free products on time. Minimum QualiChandler Industries LLC
Montevideo, MN 56265 • (16.6 miles) • Full Time • 11/6/2026
Description: About Us: Chandler Industries is a premier contract manufacturer specializing in precision machining, EDM, sheet metal fabrication, and a range of value-added services. We excel in providing exceptional value through responsive customer service, technical expertise, and innovative lean manufacturing practices. Our commitment to delivering world-class quality and on-time performance has made us a trusted partner for our customers. Chandler operates five divisions, including four in Minnesota-Blaine, Long Prairie, Montevideo, and Wyoming-and one in Lake Mills, Wisconsin. Company Benefits: Chandler offers a comprehensive benefits package to eligible employees and their dependents. This includes medical, dental, and vision coverage; life insurance; short- and long-term disability;Wald Manufacturing Inc
Brooten, MN 56316 • (38.9 miles) • Full Time • $20.00 to $30.00 / hr • 11/3/2026
Powder Coat Line Operator $20–$30 per Hour 850 State Hwy 55, Brooten, Minnesota Monday–Friday, 6:00 a.m.–2:30 p.m. Precision Manufacturing is looking for a dependable person to operate our powder-coating line in Brooten. This is a full-time, day-shift position paying $20–$30 per hour based on experience and ability. We offer health insurance, paid vacation, free online doctor visits, on-the-job training, and opportunities to advance within the company. This person will be responsible for operating our continuous overhead hook line and integrated batch powder-coating system. The work includes washing and preparing parts, hanging parts, masking and plugging holes, applying powder, removing finished parts, checking coating quality, and keeping the line moving efficiently. Additional responsibREMINGTON SEEDS LLC
Olivia, MN 56277 • (22.7 miles) • Full Time • 10/28/2026
Description: Do you like working with your hands, staying busy, and being part of a team that keeps things running smoothly? We’re looking for a Conditioning Tower Operator to join our crew! In this role, you’ll help make sure our tower facilities run like clockwork. You’ll be hands-on with equipment, keeping production top-notch and making sure our customers get the best quality every time. This is a great opportunity if you’re detail-oriented, safety-minded, and enjoy working both independently and with a team. Bonus points if you’ve got experience with seed conditioning or maintenance-but if not, we’re happy to teach the right person! What you’ll be doing: Running equipment and keeping downtime to a minimum. Performing safety and quality checks (and jotting them down accurately). GivingCavco Manufacturing LLC
Montevideo, MN 56265 • (16.6 miles) • Full Time • $17.00 / hr • 11/18/2026
Job Summary: The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Frame, layout and build floors Prepare, layout and build walls Layout, run and install electrical lines, switches, receptacles and panels/breaker boxes Install and prepare dry for finish tape, mud and texture Complete roof construction, decking, flashing and shingling Cabinet and or finishSpecSys
Granite Falls, MN 56241 • (15.3 miles) • Full Time • $75,000 to $95,000 / yr • 11/20/2026
REASONABLE FLEX SCHEDULES & START TIMES AVAILABLE! Here is your chance to showcase your skills with an established, yet growing, company that's been in business for over 25 years! We offer a variety of challenging work that plays to each employee's strengths. Check us out at Apply today! SALARY IN ACCORDANCE WITH APPLICABLE EXPERIENCE, between $75,000 and $95,000 to start BENEFITS: Medical Insurance, Health Savings Plan (HSA), Flexible Spending Plans (Dependent and Medical), Accident Insurance, Critical Illness, Short-Term Disability, Long-Term Disability, 401(k) with an employer match, Term Life Benefits, Employee Assistance Program (EAP), Employee-of-the-Month, Employee-of-the-Year, On-site Welding Training and Qualifications, Employee Luncheons, Employee and Family Company Picnics, CommBayer Built Woodworks
Belgrade, MN 56312 • (40.3 miles) • Full Time • $25.00 to $28.00 / hr • 10/31/2026
Job Title: Painter/Sprayer ABOUT US: Bayer Built Woodworks is a premier manufacturer and distributor of high-quality interior and exterior doors, millwork, and stair systems. As a family-owned company based in Minnesota, we proudly serve the Midwest with industry-leading service, exceptional craftsmanship, and a deep commitment to customer success. Our team is passionate about providing reliable products and outstanding support to builders, dealers, and homeowners alike. At Bayer Built, we believe our people are the foundation of our continued success, and we’re dedicated to fostering a culture of integrity, safety, and growth. THE QUICK DETAILS: Job Type: Full-time Pay: $25-$28 per hour; Starting pay will be determined by skills and experience Hours: Flex schedule according to workload (3Relco
Willmar, MN 56201 • (18.7 miles) • Full Time • $111,621 to $151,017 / yr • 10/28/2026
PROCESS ENGINEER Location Remote Onsite, Hybrid or Fully Remote Fully Remote Status Full-time Reports To Cheese Group Process Engineering Manager FLSA Status Exempt Management Position No Compensation $111,621-$151,017 POSITION OVERVIEW This position will apply engineering principles to design, analyze, optimize, and support industrial food and dairy processing systems. The role supports liquid and cheese projects from conceptual design through commissioning and startup, working closely with customers, regulation authorities, sales, project management, mechanical design, automation, manufacturing, and field teams. RESPONSIBILITIES: Sales Support Audit and process reviews of customers ’ existing process lines Collaborate on conceptual design of cheese process according to customer requiremeLoftness Specialized Farm Equipment
Hector, MN 55342 • (34.6 miles) • Full Time • $16.50 to $20.00 / hr • 11/4/2026
Job Title: General Laborer – Manufacturing Location: Hector, MN Position Summary: As a General Laborer at Loftness, you will work in a hands-on manufacturing environment, assisting with a variety of production tasks. This role involves supporting machine operators, assembling components, handling materials, and maintaining a clean and safe work area. Key Responsibilities: · Assist in the manufacturing and assembly of agricultural and VM equipment · Load, unload, and move parts and materials throughout the plant · Operate basic tools and equipment as directed · Inspect parts for quality and report issues to supervisors · Maintain a clean, organized, and safe work environment · Follow company policies, safety standards, and work instructions · Additional duties may be added at anytime basedSpecSys
Granite Falls, MN 56241 • (15.3 miles) • Full Time • $90,000 to $105,000 / yr • 11/20/2026
Join an Established and Growing Team! Showcase your skills with a company committed to providing services ON TIME, ON BUDGET, DONE RIGHT, and DONE SAFELY. At SpecSys, we offer exciting, challenging work tailored to your strengths, along with opportunities to make an impact. Learn more about us at and apply today! SALARY IN ACCORDANCE WITH EXPERIENCE, $90,000 to $105,000 per year starting out. BENEFITS & PERKS: Medical, Dental, & Vision Insurance; HSA/FSA options; Accident & Critical Illness Insurance; Short- and Long-Term Disability; 401(k) with Employer Match; Term Life Insurance; Employee Assistance Program; Employee-of-the-Month and Year; Onsite Welding Training and Certifications; RITALKA University; Employee Luncheons; Community Volunteering The Senior Project Mechanical Engineer compBayer Built Woodworks
Belgrade, MN 56312 • (40.3 miles) • Full Time • $30.00 to $35.00 / hr • 11/12/2026
JOB TITLE: Field Service Technician Bayer Built Woodworks is a premier manufacturer and distributor of high-quality interior and exterior doors, millwork, and stair systems. As a family-owned company based in Minnesota, we proudly serve the Midwest with industry-leading service, exceptional craftsmanship, and a deep commitment to customer success. Our team is passionate about providing reliable products and outstanding support to builders, dealers, and homeowners alike. At Bayer Built, we believe our people are the foundation of our continued success, and we’re dedicated to fostering a culture of integrity, safety, and growth. THE QUICK DETAILS: Job Type: Full-time Pay: Starting at $30-$35/hour Hours: Various, Monday-Friday BENEFITS: Health insurance Dental insurance Team Member Life InsurLoftness Specialized Farm Equipment
Hector, MN 55342 • (34.6 miles) • Full Time • 11/18/2026
Position Summary: Machine Assembler is responsible for assembling, fitting, and installing components and systems in the final stage of the manufacturing process. This role requires attention to detail, mechanical aptitude, and adherence to quality and safety standards to ensure finished products meet specifications. Key Responsibilities: Assemble mechanical and/or electrical components and subassemblies into final products according to blueprints, work orders, and verbal instructions. Perform final inspection of assembled products to ensure proper fit, function, and quality. Use hand tools, power tools, and assembly fixtures safely and effectively. Read and interpret schematics, technical drawings, and bills of materials. Follow standard operating procedures (SOPs), safety guidelines, andSpecSys
Granite Falls, MN 56241 • (15.3 miles) • Full Time • $60,000 to $95,000 / yr • 11/20/2026
Join an Established and Growing Team! Showcase your skills with a company committed to providing services ON TIME, ON BUDGET, DONE RIGHT, and DONE SAFELY. At SpecSys, we offer exciting, challenging work tailored to your strengths, along with opportunities to make an impact. Learn more about us at and apply today! SALARY RANGE: $60,000 - $95,000 IN ACCORDANCE WITH APPLICABLE EXPERIENCE! BENEFITS & PERKS: Medical, Dental, & Vision Insurance; HSA/FSA options; Accident & Critical Illness Insurance; Short- and Long-Term Disability; 401(k) with Employer Match; Term Life Insurance; Employee Assistance Program; Employee-of-the-Month and Year, RITALKA University; Employee Luncheons; Company Picnic; Community Volunteering. As a Mechanical Engineer , you will complete mechanical design work for mobilSpecSys
Granite Falls, MN 56241 • (15.3 miles) • Full Time • $17.00 to $24.00 / hr • 11/20/2026
Join an Established and Growing Team! Showcase your skills with a company committed to providing services ON TIME, ON BUDGET, DONE RIGHT, and DONE SAFELY. At SpecSys, we offer exciting, challenging work tailored to your strengths, along with opportunities to make an impact. Learn more about us at and apply today! FLEXIBLE SCHEDULE including 4 10-hour shifts and 5 8-hour shifts with flexible start times! SALARY RANGE: $17.00 to $24.00 per hour BENEFITS & PERKS: Medical, Dental, & Vision Insurance; HSA/FSA options; Accident & Critical Illness Insurance; Short- and Long-Term Disability; 401(k) with Employer Match; Term Life Insurance; Employee Assistance Program; Employee-of-the-Month and Year, On-site Welding Training and Certifications; RITALKA University; Employee Luncheons; Family CompanySpecSys
Granite Falls, MN 56241 • (15.3 miles) • Full Time • $17.00 to $24.00 / hr • 11/20/2026
Here is your chance to showcase your skills with an established, yet growing, company. We offer a variety of challenging work that play to each employee's strengths. No experience? No problem! We will train! Check us out at and apply today! FLEXIBLE SCHEDULE: 4/10-hour shifts or 5/8-hour shifts with flexible start times! SALARY RANGE: $17.00 to $24.00 per hour BENEFITS: Medical Insurance, Health Savings Plan (HSA), Flexible Spending Plans (Dependent and Medical), 401(k) with an employer match, Accident Insurance, Critical Illness, Short-Term Disability, Long-Term Disability, Term Life Benefits, Employee Assistance Program (EAP), Employee-of-the-Month, Employee-of-the-Year, On-site Welding Training and Qualifications, Employee Luncheons, Employee and Family Company Picnics, Community Volunt