Blue Springs, MO 64014 • (8.9 miles) • Full Time • $26.00 to $36.00 / hr • 10/19/2026

Safely operate, repair, rebuild and perform maintenance on Company owned or leased heavy duty diesel trucks and equipment including rolling stock to ensure its ability to operate safely Location: 7801 E Truman Road Kansas City MO Pay Rate: $26-$36/hr. More pay available based on experience, certifications, and skill level. Hours / Shift: 3pm-1130pm M-F. Immediate OT after 40hrs worked. About the Role We are seeking an experienced Diesel Mechanic to maintain and repair our waste and recycling fleet. In this role, you will perform routine maintenance, diagnostics, and major repairs on refuse trucks (rear loaders, side loaders, front loaders, and roll-offs) to ensure safe and reliable operations. Key Responsibilities Perform preventative maintenance (PMs), inspections, and repairs on diesel e

Kansas City, KS 66115 • (21.3 miles) • Full Time • 10/22/2026

Company: US3270 Sygma Kansas City (The Sygma Network, Inc) Sales Territory: None Zip Code: 64153 Travel Percentage: 0 COMPENSATION INFORMATION: The pay range provided is not indicative of Sysco’s actual pay range but is merely algorithmic and provided for generalized comparison. Factors that may be used to determine rate of pay include specific skills, work location, work experience and other individualized factors JOB SUMMARY To assist fleet technicians in providing safe, reliable and cost-efficient vehicles by learning to perform quality preventive maintenance inspections and repairs as well as learning to perform diagnosis and repair as required to prevent breakdowns on road, reduce vehicle downtime and improve total fleet reliability. RESPONSIBILITIES Perform required inspections

Kansas City, KS 66101 • (20.4 miles) • Full Time • 10/18/2026

Job Description General Motors has a need for qualified Mechanical Journeypersons (P ipefitters ). You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: Experience with planned maintenance systems and predictive technologies Experience with industrial robotics, automation, and conveyance systems Primary Responsibilities: Follow established safety procedures according to OSHA standards and company procedures Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps

Lenexa, KS 66250 • (23.5 miles) • Full Time • 10/11/2026

The Maintenance - Mechanic provides advanced mechanical support. Performs a variety of complex technical tasks with mechanical systems. Primary Responsibilities: Performs moderately complex technical functions related to the support of developing engineering activities, such as: Repairing, maintaining, overhauling, modifying, operating and material handling equipment. Installing, dismantling and inspection of electrical, electronic, mechanical, HVAC, and material handling equipment and fixtures. Diagnosing and solving electronic and/or mechanical problems involved in the operation of the system. Recommending modifications to designs as needed. Assists other technicians in the performance of mechanical maintenance activities and/or providing training/guidance. Fabricates mechanical system c

Kansas City, MO 64106 • (17.7 miles) • Full Time • 10/18/2026

Description Brinks Home™ is a leader in the smart security industr y , protecting over one million people across the U.S., Canada, and Puerto Rico. Our platinum-grade protection is backed by award-winning customer service and expertly trained professionals. We strive for the highest standards for our customers while fostering a positive work environment for our employees . We create a culture that fosters innovation, celebrates creativity, and encourages authenticity. Join us and be part of a collaborative team that is relentless in our pursuit of security for life. Position Overview: We are currently seeking a determined Alarm Service Technician who embodies our core values: Service, Accountability, Customer Focus, Growth, and Integrity. The Alarm Service Technician is a hands-on ro

Overland Park, KS 66213 • (18.9 miles) • Full Time • $53,040 / yr • 10/18/2026

Overview: GovCIO is currently hiring for an IT Service Technician to provide onsite support for our federal customer. This position will be located in Overland Park, KS and will be an onsite position. All contract personnel may be required to travel occasionally for site coverage. Employee will be required to obtain an A+, ITIL Foundation, HDI certification, and one of the following within six months of hire: Security+, Network+, or Server+. The cost of certification will be reimbursed by GovCIO. Responsibilities: The employee provides support for all onsite IT activities. They consult with support teams, help desks, customers and other technical staff in the resolution of problems. They coordinate and perform operation and/or maintenance activities for networks/servers. They identify recu

Kansas City, MO 64101 • (18.7 miles) • Full Time • 10/23/2026

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. Title: Installation Technician II Position Description: We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. As an Installation Technician, you will be responsible for provid

Kansas City, MO 64106 • (17.7 miles) • Full Time • 10/18/2026

We’re building a world of health around every individual — shaping a more connected, convenient and compassionate health experience. At CVS Health®, you’ll be surrounded by passionate colleagues who care deeply, innovate with purpose, hold ourselves accountable and prioritize safety and quality in everything we do. Join us and be part of something bigger – helping to simplify health care one person, one family and one community at a time. Position Summary Join #TeamCVS and play an important part in delivering the kind of service that keeps our customers coming back to CVS Pharmacy. You’ll work alongside other dedicated individuals in a fast-paced warehouse environment that inspires you to grow your skills and advance your career. • Full-time position

Mission, KS 66202 • (18.5 miles) • Full Time • 10/18/2026

Casey's Auto Repair Location: Mission, KS Schedule: Monday-Thursday, 7:00 a.m.-5:00 p.m. Friday 7:00 a.m.-12:00 p.m. Pay Rate: $70,000 base salary Pay Type: Salary + 1% gross profit commission Earning Potential: Up to $90,000 How to Apply (IMPORTANT) Step 1: Apply Step 2: Complete a quick phone interview with our AI assistant “Paige” (takes about 10 minutes) After you apply, you’ll receive an automated text message with a phone number you can call at your convenience to complete the interview. Candidates who complete the Paige interview get priority. About Casey's Auto Repair Casey's Auto Repair is seeking an experienced Automotive Service Advisor in Mission, Kansas. This salaried position offers a $70,000 base plus 1% gross profit commission, with earning potential up to

Riverside, MO 64150 • (23.2 miles) • Full Time • $19.00 / hr • 10/23/2026

Morning Shift! Full-time! Benefits! Become an Employee-Owner! HOW YOU WILL MAKE A DIFFERENCE As an employee-owner in the Fill Plant, this role will focus on inspecting and sorting gas cylinders returned by customers. The inspected/sorted cylinders are then placed into production to be refilled or tested based on the inspection. This role is also responsible for assisting customers and drivers with cylinder orders and cylinder loading as needed. Please note: the permanent shift will be 5:30am-1pm, M-F CK SUPPLY CORE VALUES: Please read slowly these are non-negotiables and we are going to ask you about them in the interview! Driven - Hardworking, Dedicated, Dependable, Desire to be the Best Passionate - Positive Attitude, Appearance, Pride, Love What We Do People-Oriented - Honest, Respectfu

Kansas City, MO • (18.2 miles) • Full Time • 10/23/2026

Signing Bonus Available (based upon level of training and experience) Payscale $70,000-100,000 annually Housing Assistance Available (based upon level of training and experience) ND state law requires the manufacturer to pay retail flag hours for warranty repairs This position requires relocation to the state of North Dakota Escape the hustle of big-city life and discover the unmatched quality of living and working in Grand Forks, North Dakota at Nelson Chrysler, Dodge, Jeep, Ramof Grand Forks. With a lower cost of living, shorter commutes, and a strong sense of community, Grand Forks offers a more relaxed and balanced lifestyle without sacrificing career growth. Enjoy great schools, clean air, open spaces, and access to fishing and other outdoor activities year-round! All while being part

Merriam, KS • (19.7 miles) • Full Time • 10/23/2026

Now Hiring: Automotive Service Advisor Kansas City Hyundai | Kansas City, MO Pay Range: $70,000–$120,000 Annually Kansas City Hyundai is looking for a motivated, customer-focused Automotive Service Advisor to join our growing service department! If you have a passion for customer service, enjoy working in a fast-paced environment, and want to maximize your earning potential, we want to hear from you. What You'll Do Greet customers and write accurate repair orders. Listen to customer concerns and recommend appropriate maintenance and repairs. Communicate repair recommendations, pricing, and timelines clearly. Work closely with technicians to ensure quality repairs and timely vehicle delivery. Keep customers informed throughout the repair process. Build lasting customer relationships and mai

Lenexa, KS 66219 • (23 miles) • Full Time • 10/23/2026

Southern Home Services is a residential HVAC, Plumbing and Electrical company that acquires, owns, and operates businesses around the United States. We are seeking business leaders to join our growing team and become an integral part of our company's future. Are you ready to be Part of Something BIGGER! Mission Plumbing, Heating & Cooling, a Southern Home Services Company, is looking for a dynamic HVAC Service Technician to join a thriving business that believes in work life balance and cares about YOU! About this role: An HVAC Service Technician is responsible for the service, maintenance, and repair of heating, ventilation, and air conditioning systems in residential and commercial settings. This role involves diagnosing system issues, performing routine and emergency repairs, and ensuri

Blue Springs, MO • (8.2 miles) • Full Time • 10/23/2026

We're looking for Automotive Mechanics with a minimum of 1 year of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a Brake & Tire Technician, you'll be expected to perform light maintenance or repairs, including changing brakes and tires and performing : Technician services, such as routine inspections/maintenance Basic mechanical repair for brake pads/calipers/rotors, tire installations, and wheel alignments At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers ( click here to l

Independence, MO 64050 • (14.2 miles) • Full Time • 10/23/2026

Wil-Pav, Inc, is seeking applications from skilled heavy equipment and automotive mechanics. The applicant will be responsible for maintaining the fleet of vehicles and equipment operated by the company. Applicants will also need to be on call during hours of crew operation in case of emergency. Experience with popular brands of heavy equipment is required.

Kansas City, MO • (18.2 miles) • Full Time • 10/23/2026

Company Description CRB is a leading provider of sustainable Engineering, Architecture, Construction and Consulting solutions to the global life sciences and food and beverage industries. Our employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description CRB is seeking a talented and motivated Control System Developer to join our growing team. In this role, you will be responsible for the programming, implementation, testing, and documentation of complex and technically sophisticated automated control systems. You will wo

Kansas City, KS 66102 • (22.7 miles) • Full Time • 10/23/2026

We are seeking an experienced Diesel Mechanic with skills advanced in diagnostics, troubleshooting, and repairing On-highway vocational trucks, and all upfitted accessories and attachments, including cranes, welders, hydraulic tool circuits, etc. Skills needed - Medium and Heavy Truck Experience - Engine & aftertreatment systems experience - Diagnostic Equipment Experience - Fault Tree - Schematics understanding - Experience in troubleshooting short circuits and low-voltage issues. - A/C systems and component understanding -Hydraulic systems Benefits · Growing Career · Simple IRA Plan with 3% company matching offered after 90 days. · 7 paid holidays per year, including the day after Thanksgiving. · 80 hours of PTO after 1 year · Medical, dental and vision benefits after 60 days. · Paid Wee

Olathe, KS 66061 • (28.4 miles) • Full Time • 10/23/2026

Job Title: Shop Crane Technician Reports to: Service Manager FLSA Status: Hourly – Non Exempt Department: Service About Us: CraneWorks is an award-winning global provider of lifting solutions. Our commitment to customer service is unparalleled and we consistently strive to earn our customers’ loyalty and trust. Our fundamental values are safety, quality, integrity, reliability, and teamwork and our commitment to these values help steer our business operations. We are proud to be an Equal Employment Opportunity employer. Job Summary: All Mechanics are responsible for the inspection, diagnosis, repair and maintenance of various crane equipment including mobile cranes (All Terrain, Rough Terrain, Crawler Cranes, Boom Trucks, knuckle booms, bucket trucks, etc.). Mechanic experience preferred w

De Soto, KS 66018 • (33.5 miles) • Full Time • $28.00 / hr • 10/23/2026

Job Title: Millwright Location: Kansas City, Kansas Area, ( Lenexa, Olathe, Kansas City Kansas Area ) Job Type: Full-Time Pay Rate: $28 per hour Per Diem: $100 per day (must meet requirements) Schedule: 50–60 hours per week Must Have: OSHA 10 Construction Certificate Key Responsibilities: Read and interpret blueprints, schematics, and technical manuals for machinery installation, maintenance, and repair Troubleshoot and repair mechanical, hydraulic, and pneumatic systems Safely operate hand tools, power tools, welding equipment, and machining tools Perform routine maintenance, including equipment alignment, calibration, and inspections Assist with machinery setup, breakdowns, and relocations as needed Collaborate with team members and other departments to complete projects on schedule Work

Kansas City, MO 64125-1327 • (18.2 miles) • Full Time • 10/22/2026

Description: Scrap Management Industries inc. is looking for a skilled Diesel Mechanic to maintain and repair our fleet of heavy-duty trucks and trailers. Our company runs a high-volume freight operation, and we rely on professional mechanics to keep our trucks DOT-compliant, road-ready, and running at peak performance. If you're experienced with heavy-duty trucks, enjoy a fast-paced shop, with a self-directed workflow, and take pride in your work, this role is for you. Duties/Responsibilities: Inspect, diagnose, and repair diesel engines, drivetrains, brakes, suspension, and trailer systems Perform routine maintenance, including PMs, oil changes, tire checks, and brake services Utilize diagnostic tools (Cummins Insite, Noregon, etc.) to troubleshoot issues and complete repairs Conduct DOT

Kansas City, KS 66111 • (26.6 miles) • Full Time • $18.00 to $26.00 / hr • 10/22/2026

KC Disposal is a sustainable waste and recycling service provider with an unmatched family atmosphere! We service residential and commercial customers. We are looking for an energetic, mechanically inclined person to be apart of our team. KC Disposal has an multiple immediate openings for entry level, PM technicians and experienced techs. Join an essential growing company that services the KC metro community. Learn new, practical skills and gain experience with on-the-job training. Join a team that makes you feel like family! Responsibilities: Diagnose and troubleshoot problems using diagnostic tools. Perform repairs and on the job hands on training. Maintain a clean work environment. Perform repairs on and not limited to; Minor Diesel engine repairs, hydraulic, electrical 12volt, air syst

Kansas City, MO • (18.2 miles) • Full Time • $30.00 to $40.00 / hr • 10/22/2026

MECHANIC - FLEET MAINTENANCE Metro Roll-Off Container Services is a fast-growing sanitation and waste company serving the Greater Kansas City area. We take pride in dependable service, reliable equipment, and getting the job done right. POSITION OVERVIEW The Mechanic is responsible for making sure all Metro Roll-Off Container Services vehicles are safe, dependable, and ready for the road each day. This position performs preventative maintenance, DOT inspections, diagnostics, and major and minor repairs on commercial trucks and company vehicles. KEY RESPONSIBILITIES Perform DOT inspections and ensure vehicles are safe and road-ready. Complete daily safety checks and identify needed repairs before vehicles return to service. Perform preventative maintenance, oil changes, fluid services, and

Riverside, MO 64150 • (23.2 miles) • Full Time • 10/22/2026

FORCE America, Inc. is looking to fill an opening for a Mechanical/Hydraulic Inside Sales Specialist . This role, located in person at our Riverside, MO location, will provide customer support by responding to inquiries, requests for quotes as well as answer basic questions on systems we provide. This person will also build relationships with customers, provide technical support and troubleshooting, negotiates with customers and coordinates with our Outside Sales Team members. FORCE America provides systems and components to the on-and off-highway mobile markets. FORCE America is 100% employee-owned and has a strong presence in the market for over 70 years. We provide a competitive salary and excellent benefits. Essential Responsibilities: Partners with assigned customer base to provide pr

Olathe, KS • (25.2 miles) • Full Time • 10/22/2026

The Robert Brogden Automotive Group is looking for skilled,hardworking Technicians for our Olathe Buick-GMC dealership. If you are anexperienced Service Tech looking to make a change and more money, then we want to talk to you! Pay is based on experience and is flat rate. Responsibilities Perform work specified on the repair order with efficiency and in accordance with dealership Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time n

Kansas City, KS • (25.6 miles) • Full Time • $55,000 to $95,000 / yr • 10/22/2026

Since 1968, A-1 Sewer & Septic Service, Inc. has been serving Kansas City with the fastest, friendliest service in the community. We are a family-owned business that seeks to serve the residents and businesses of the Kansas City Metro Area with high-quality service, honesty and hard work. We are seeking an individual at least 2 -Years of drain cleaning experience that exhibits those qualities to join our team as a full-time drain technician. Job Responsibilities: Diagnose and offer solutions to customers for drain-related issues Unclog drains of all types for residential and commercial customers Light plumbing repairs for residential and commercial customers Ensure proper billing and daily documentation of activities Benefits: Year-round, full-time work Commission based pay ($52,000 to $95

Kansas City, MO • (18.2 miles) • Full Time • 10/22/2026

Mechanical Assembler – Vehicle Upfitting Are you passionate about hands-on work and eager to contribute to a growing industry? Join our team as a Mechanical Assembler and play a vital role in customizing vehicles for specialized applications. In this dynamic position, you'll leverage your mechanical skills to assemble, install, and fine-tune components that bring innovative vehicle solutions to life. Your expertise will directly impact the quality and safety of our products, making this an exciting opportunity for motivated individuals eager to grow their career. Required Skills: Prior experience in mechanical assembly, vehicle upfitting, or related fields Knowledge of mechanical systems, wiring, and tools Ability to read blueprints, technical drawings, and work instructions Strong attenti

Kansas City, KS 66115 • (21.2 miles) • Full Time • 10/22/2026

Description: SUMMARY: This position is primarily responsible for performing under limited supervision in the assembly of ground support equipment. This position will also be providing instructional lead to assembly workers pertaining to the assembly of towing tractors by performing the following duties. ESSENTIAL DUTIES & RESPONSIBILITIES (To perform this job successfully, the incumbent must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position). Diagnose mechanical problems and perform repairs Diagnoses, rebuilds and repairs vehicles and equipment Performs inspe

Concordia, MO • (42.5 miles) • Full Time • 10/21/2026

Walk In Interviews Welcome: 102 NW 4th Street, Concordia, MO LV Petroleum is a recognized leader in the energy and fueling industry, committed to delivering exceptional service and products to our customers. Our team is integral to ensuring safe and efficient operations at our petroleum facilities. Job Overview: We are in search of a skilled Technician to join our talented maintenance team at TA/LV Petroleum. The Diesel Technician will play a crucial role in maintaining and repairing Diesel vehicles and equipment. If you possess a strong technical background in diesel mechanics and are passionate about delivering quality service, we want to hear from you! Key responsibilities include: Performing routine maintenance and repairs on diesel engines, ensuring optimal functionality. Diagnosing a

Overland Park, KS • (18 miles) • Full Time • $96,148 to $195,149 / yr • 10/21/2026

Are you seeking purpose, challenge, and talented colleagues? With a diverse portfolio of commercial, retail, hospitality, multi-family, and light industrial programs, CESO has the opportunity for you to develop your career. We develop leaders and empower our associates to use their skills and talents to positively impact the world through service – to our coworkers, clients, and communities. We subscribe to the mission of “finding purpose through serving others,” so if this speaks to you, let’s connect! At CESO, the MechanicalTeam Lead brings advanced engineering expertise and leadership experience to oversee the design, coordination, and delivery of engineering construction documentation, specifications, and details across multiple complex projects. This position is responsible for managi

Liberty, MO • (22.9 miles) • Full Time • 10/21/2026

Job Title: Mechanical Assembler Job Description This role focuses on mechanically upfitting and assembling trucks, including Ford F-150 and U-Haul vehicles, in a modern, climate-controlled facility. You will read and interpret blueprints, use a variety of hand and power tools, and follow daily instructions to complete high-quality mechanical assemblies and modifications. Responsibilities Perform mechanical upfitting and assembly on Ford F-150 trucks and U-Haul vehicles according to project specifications. Read and interpret blueprints and technical drawings to execute accurate mechanical assemblies. Use hand tools and power tools safely and effectively to assemble, install, and modify mechanical components. Follow day-to-day instructions and work orders to complete assigned tasks on schedu

North Kansas City, MO • (19.4 miles) • Full Time • 10/20/2026

Automotive Technician Hiring Event | October 22–23 | All Locations & Experience Levels Event Location: Oakes Kia North Kansas City | North Kansas City, MO Event Dates: October 22 & 23, 2026 Event Hours: 8:00 AM – 4:00 PM Both Days Schedule: Full-Time Opportunities | Schedules Vary Compensation: Competitive Hourly or Flat-Rate Pay Based on Experience Your Skills. Your Future. Your Next Opportunity. Looking for a fresh start? Ready to take your automotive career to the next level? Your next opportunity could be just one interview away! Oakes Auto Group is hosting a TWO-DAY AUTOMOTIVE TECHNICIAN HIRING EVENT , and we're looking for motivated individuals of ALL experience levels to join our growing service teams across the Kansas City metro! THREE DEALERSHIPS. TWO DAYS. MULTIPLE OPPORTUNITIES.

Odessa, MO 64076 • (22.4 miles) • Full Time • $1,000 to $100,000 / yr • 10/20/2026

NOW HIRING EXPERIENCED AUTOMOTIVE TECHNICIAN Hotchkin’s Rods & Kustoms Odessa, Missouri Do you love working on classic cars, hot rods, and custom builds? Do you enjoy stepping back when the job is finished and knowing you created something with your own two hands? At Hotchkin’s Rods & Kustoms, we build dreams into reality and keep the classics alive. Whether it’s a restomod with an engine swap, an all-original classic, or a custom cruiser, we work on them all. We’re looking for an experienced automotive technician who takes pride in their work and wants to be part of a growing custom automotive shop. The work we do includes: • Classic automotive repair and restoration • Restomods & custom builds • Engine swaps • Complete wiring & electrical systems • A/C installation • Wheels & tire instal

Kansas City, MO 64109 • (15.7 miles) • Full Time • $26.95 to $33.00 / hr • 10/20/2026

Description: Aspis strives to make enterprise cybersecurity solutions and professional services accessible to organizations of all sizes, from small and medium-sized businesses to large enterprises, nonprofits, and municipal, state, and federal government agencies. Aspis is a HUBZone-certified small business. Our values are Integrity, Community, and Diversity. https://aspis.consulting Aspis is expanding its audiovisual services team and seeking a customer-focused Level 1 AV Service Technician to provide onsite AV and video teleconference (VTC) support at a secure federal campus in Kansas City. In this entry-level role you will keep conference and VTC rooms running for senior leaders setting up calls, supporting live meetings, and performing first-line troubleshooting and break-fix. This is

Kansas City, KS 66111 • (26.6 miles) • Full Time • $34.00 to $50.00 / hr • 10/20/2026

Description: American Equipment Holdings , is one of the leading overhead crane solutions providers in the United States. Over the years, our ability to grow and set ourselves apart from the competition is the result of a tried and true philosophy – take care of our customers and take care of our people. We are seeking Experienced Crane Service Technicians to join our team at our American Equipment- Shannahan Division. We hire and develop technicians across multiple experience levels (Level 2 through Master level) . This advanced-level position is ideal for experienced technicians with strong mechanical and electrical skills. You will be responsible for performing complex inspections, diagnostics, repairs, and installations on overhead cranes and hoists, including systems with advanced aux

Olathe, KS 66061 • (28.4 miles) • Full Time • 10/20/2026

Nextran Truck Centers Diesel Technicians - Olathe, KS Are you looking to further develop your profession into a career? Are you driven by opportunity? Nextran Truck Centers is hiring! Our Employees Benefit from: Career Paths || Network of 30 Dealerships || Disability Insurance || Paid Time Off || Nextran Paid Life Insurance Family Centered Values || Medical and Dependent Care FSA || 401(k) Retirement Plan with Match || Company-Paid Holidays || EAP Great Medical, Dental, & Vision Benefits || Social Responsibility Opportunities || 28+ Years of Industry Experience || Professional Growth Now Hiring: DIESEL TECHNICIANS Hourly Pay: $30–$50/hour with final compensation based on the candidate’s relevant experience, certifications, education, and demonstrated skills. Hours of Work: Monday through F

Kansas City, MO 64114 • (13.5 miles) • Full Time • $28.00 to $42.00 / hr • 10/19/2026

Celebrating our 82nd year, Martin Engineering is a privately owned global manufacturing company in Neponset, IL.As the leader in our industry, we believe our people are responsible for our SUCCESS . Our culture is unique; we want our employees to arrive at work happy and leave feeling that same way for the day. We are united; we know we are better together. We strive to deliver superior service to all our internal and external customers. If you share our values, please continue reading to find out what we are looking for in a Martin Service Technician . The Service Technician is responsible for delivering, installing, servicing, and maintaining Martin wear components and products on assigned service routes.The Service Technician will work closely with sales staffto identifysales opportunit

Merriam, KS • (19.7 miles) • Full Time • 10/19/2026

We’re looking for the next candidate interested in joining the AB Auto Repair team. Desired candidate would have automotive repair knowledge, basic tools and a desire to grow with us. Knowledge in performing diagnostics using scanner tool and experience using auto shop management systems a plus. Open Monday thru Friday, no weekends.Pay based on knowledge and work experience. Contact us at or . www.abautorepairkc.com Qualifications Valid driver license Have basic tools Basic scanner tool knowledge Perform oil changes, brakes, suspension work, tune up & timing belt service Some diagnostic skills

Kansas City, KS 66102 • (22.7 miles) • Full Time • $24.00 to $27.00 / hr • 10/19/2026

Leak Detection & Repair: Investigate and fix leaks on various residential roofs (shingle, metal, tile). Maintenance & Inspection: Perform routine inspections and preventative maintenance to prolong roof life. Material Application: Replace damaged shingles, flashing, underlayment, and sealant. Safety Compliance: Adhere to OSHA safety guidelines and company safety policies while working at heights. Customer Communication: Interact professionally with homeowners to explain repairs and, in some cases, provide quotes. Site Management: Clean up job sites and maintain company vehicles and tools. Qualifications Experience: 2–3+ years of experience in roofing, specifically in repairs. Physical Ability: Ability to work at heights, lift heavy equipment, and work in varied weather conditions. Skills:

Lenexa, KS • (24.3 miles) • Full Time • 10/19/2026

FindTalent is seeking a Data Center Mechanical Engineer to design and support HVAC and plumbing systems for data center facilities . This role involves working on both large-scale hyperscale and colocation data centers, as well as associated administrative and support spaces. The ideal candidate will contribute to system design, construction support, energy efficiency analysis, and sustainable building practices while collaborating with multidisciplinary teams on innovative infrastructure projects. Key Responsibilities: Lead the design of HVAC and plumbing systems for data center and support facilities. Participate in project delivery through methods such as Design-Bid-Build and alternative approaches. Conduct airflow modeling, energy audits, and code compliance reviews. Support constructi

Kansas City, KS • (25.6 miles) • Full Time • $25.00 to $40.00 / hr • 10/19/2026

HVAC Service Technician Kansas City, Kansas Our client has decades of experience servicing HVAC clients in the mid-west. This is a great opportunity to join a growing team of highly skilled professionals who provide exceptional service and maintain the highest industry standards. If you are a skilled HVAC Service Technician looking to join a reputable company that values professionalism and customer satisfaction, we encourage you to apply. This contractor prides itself on building strong careers for its employees and treats everyone like family! Job Overview: We are seeking an experienced and reliable HVAC Service Technician to join our team. This is a Non-Union position. The HVAC Service Technician will serve commercial clients. Responsibilities: Diagnostic Skills: Perform thorough assess

Grandview, MO 64030 • (9.4 miles) • Full Time • 10/17/2026

Lane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVACService Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction • Uses a variety of hand-tools, following blueprints or engineering specifications, to di