Wentzville, MO 63385 • (43.3 miles) • Full Time • 10/19/2026

Job Description General Motors has a need for qualified Mechanical Journeypersons (Millwrights.) You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: Experience with planned maintenance systems and predictive technologies Experience with industrial robotics, automation, and conveyance systems Primary Responsibilities: Follow established safety procedures according to OSHA standards and company procedures Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps,

St. Charles, MO 63304 • (43 miles) • Full Time • 10/18/2026

Who we are looking for As our Controls and Automation Technician, you'll be working with a highly motivated team skilled in the trade of industrial maintenance. You will be responsible for maintenance and repairs of a wide variety of plastics manufacturing equipment, support equipment and general facilities. This position is open for the following shifts: Shift: N1- 5:30pm-5:30am Tuesday-Thursday and every other Monday What you will work on You will apply root cause analysis and troubleshooting skills in response to breakdown calls and continuous improvement projects. You will use your communication skills and tools to share information with team members, our customers, and your management team on equipment status. Key Responsibilities Troubleshooting skills within the areas of mechanical,

Chesterfield, MO 63017 • (42.4 miles) • Full Time • $20.00 / hr • 10/18/2026

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Shift Details: This facility works 12-hour shifts. Must be able to work any shift. 1st Shift -6:00am-2:00pm 2nd Shift 2:00pm-10:00pm 3rd Shift 10:00pm-6:00am Starting Wage Range: $20.00/hr with increases after 90 days ranging from $21.42 to $25.60, depending on the position Additional Incentives: Shift Differentials (2nd Shift and 3rd Shift: $0.60/hr) + Hourly Pay! Health Insurance (Medi

Saint Charles, MO 63302 • (28.3 miles) • Full Time • 11/1/2026

Description If you are a talented Cartographer who would thrive in an environment that supports large- and small-scale cartographic production in a high-tempo GEOINT environment then look no further!! The role requires a strong understanding of geography, cartographic finishing principles, and Geographic Information Systems (GIS) to produce, edit, and review high-quality maps and charts while ensuring timely, accurate mission support. Successful candidates are adaptable, team-oriented, professional, and committed to delivering high-quality GEOINT products. Key Responsibilities Produce, edit, and review national and international maps and charts at various scales using established cartographic standards. Create and maintain standard mapping products, including: Topographic Map (TM) MGCP Top

Saint Louis, MO 63122 • (44.3 miles) • Full Time • $30.00 to $34.00 / hr • 11/6/2026

Are you an experienced sewing and or fabrication professional with a passion for leadership, quality, and continuous improvement? We are looking for a Production Shop Supervisor tolead our sewing operations and ensure the highest standards of safety, quality, productivity, and customer satisfaction. In this role, you will supervise daily shop activities, support employee growth, coordinate production schedules, and drive continuous improvement efforts. The ideal candidate is a hands-on leader with strong technical expertise and the ability to motivate and develop a high-performing team What You'll Do Supervise and coordinate daily sewing shop operations to meet production schedules and customer requirements. Assign work based on team member skill levels, workload, and production priorities

Valley Park, MO 63088 • (39.5 miles) • Full Time • 11/5/2026

Overview The Role As a Supervisor at Lucky Strike Entertainment, you will lead the floor on every shift, support your team across bowling, arcade, food and beverage, bar, and events, and deliver the kind of guest experience that makes people want to come back. What You'll Do Own the floor on every shift, keeping service flowing, guests happy, and the team moving across bowling, arcade, food and beverage, bar, and events Step into any position as needed to maintain speed, service standards, and guest satisfaction throughout the shift Coach and develop hourly team members on service standards, safety practices, and company expectations Drive sales through guest engagement, upselling, and supporting events and in-center promotional programs Maintain facility readiness, lane conditions, arcade

Festus, MO 63028 • (37.9 miles) • Full Time • $39.00 to $50.00 / hr • 11/3/2026

Industrial Controls Electrician Your impact, at a glance Keep production running with expert electrical maintenance and rapid troubleshooting Restore equipment by diagnosing motors, VFDs, starters, breakers, transformers, and control systems Decipher schematics, blueprints, and wiring diagrams to pinpoint faults Interface with PLCs and instrumentation to sustain reliable automation Install and replace key components: motors, valves, thermocouples, and transmitters Advance preventive maintenance to reduce downtime and extend asset life Use the CMMS to log work, prioritize tasks, and locate critical parts Operate mobile equipment and support rigging operations safely Champion safety procedures and maintain an orderly work area Required background Experience in industrial electrical maintenan

Chesterfield, MO 63017 • (42.7 miles) • Full Time • 10/30/2026

When you re part of the team at Thermo Fisher Scientific, you ll do important work. And you ll have the opportunity for continual growth and learning in a culture that empowers your development. With revenues of more than billion and the largest investment in R&D in the industry, we give our people the resources and opportunities to make significant contributions to the world. Client Impactful Work: Through Unity Lab Services, we offer integrated lab services, support, and supply management with customized service offerings and world-class experts to address our customers' unique laboratory business needs. Our inventory management specialists use our intuitive electronic systems and mobile scanning tools to ensure orders move efficiently from dock to desk. A day in the Life: Use handheld R

Cadet, MO 63630 • (23.6 miles) • Full Time • $110,000 to $125,000 / yr • 10/24/2026

Process Safety Engineer Location:Cadet, MO, USA Language:English Travel:10%- 15% Seniority Level: Associate Buckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Be a part of our chemistry. Buckman associates have a real impact. Not just on the world of chemistry, but also on how the world uses chemistry to enhance manufacturing, improve products, solve problems and protect the environment. Together we practice the chemistry of success with an innovative mix of commitment and reward, teamwork and improvement, leadership and transformation, integrity and growth. We believe in a healthy work/life balance and we recognize the im

Saint Louis, MO 63131 • (44.9 miles) • Full Time • $17.50 / hr • 10/21/2026

Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others. Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious. Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt. Passion for Positivity: We greet each day with warmth and possibility. Collective Ambition: We have high aspirations that are achieved when we

Saint Charles, MO 63304 • (40.7 miles) • Full Time • $17.50 / hr • 10/18/2026

Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others. Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious. Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt. Passion for Positivity: We greet each day with warmth and possibility. Collective Ambition: We have high aspirations that are achieved when we

Washington, MO 65066 • (23.7 miles) • Full Time • 10/16/2026

Owensville, MO | Starting at $25+/hr Depending on Experience Know CNC? Know how to lead people? Tired of being just another number? We're looking for a hands-on Production Supervisor who can do more than manage from a desk. This role is ideal for someone with CNC setup experience who enjoys solving problems, supporting employees, and keeping production moving. If you've loaded programs, troubleshot machines, trained operators, and led a team to hit production goals, we'd like to talk with you. What You'll Do Lead a team of 3-6 production employees on 2nd shift Coach, train, and hold employees accountable Perform CNC setup and load programs as needed Troubleshoot machine and production issues Monitor quality, productivity, and safety Communicate effectively with employees and leadership Hel

Union, MO 63084 • (15 miles) • Full Time • 10/15/2026

Now Hiring for Production Workers in Union, MO Long term temp to hire roles with room for career growth in the company! Weekly pay and benefits also offered! 12 hour rotating shift- 2 weekends a month Job duties include: Working on production line Feeding raw material into machines Checking for quality Packing product for shipment Discarding unusable product/plastic in grinding machines Keeping a clean work area Other duties as assigned Don't wait apply today! #nowhiring Previous experience in warehouse setting Ability to stand for 12 hour shift Ability to bend/stoop/lift/twist and perform repetitive motions Commitment to attendance and punctuality Ability to follow GMPs Ability to work in hot environment #nowhiring

Bourbon, MO 65441 • (8.8 miles) • Full Time • 10/15/2026

Imperial is seeking a dynamic and experienced Plant Manager to lead all operations at our Bourbon, MO facility. This role is responsible for the overall leadership and performance of the facility, including full Profit & Loss (P&L) responsibility. The Plant Manager leads safety, quality, production, delivery, cost, employee engagement, and continuous improvement while ensuring the plant meets customer expectations and business objectives. The Bourbon facility is a larger and increasingly complex manufacturing operation currently supporting both hat embroidery and apparel screen printing. With planned growth in the facility, the Plant Manager will be responsible for building the people, processes, capacity, equipment, and organizational capability needed to support that growth while maintai

Wentzville, MO • (43.6 miles) • Full Time • $20.00 to $30.00 / hr • 10/11/2026

Fusion Industrial Group is actively hiring an Electrical Control Panel Builder to join a local team in the Wentzville Missouri area. If you enjoy hands-on electrical work, building equipment from drawings and schematics, and seeing a finished product come together, this could be a great opportunity. You'll help build and wire electrical automation control panels used by American manufacturing companies. What You'll Do Assemble and wire electrical automation control panels Install electrical components, terminal blocks, relays, switches and other control devices Perform point-to-point wiring according to electrical drawings and schematics Measure and mark panels for drilling, cutting and component placement Use hand and power tools including drills, screwdrivers, wire cutters and related sh

Saint Louis, MO 63127 • (43 miles) • Full Time • 11/1/2026

Description: The Senior Project Manager (SPM) is responsible for the successful delivery of projects from preconstruction through closeout, primarily through early engagement and/or design-build delivery methods. This role ensures that projects meet schedule, budget, quality, and safety goals while building and maintaining strong client relationships. The SPM leads project teams, manages risk, and upholds company standards, acting as the key point of accountability for both internal and external stakeholders. As a master of all phases of project executionfrom first client introduction to final closeoutthe SPM confidently and independently leads at least one significantly complex project while mentoring less-experienced project managers, modeling client trust-building and professional excel

Fenton, MO 63026 • (39.6 miles) • Full Time • $24.50 to $25.50 / hr • 11/7/2026

Assembler - 2nd Shift | $25.50/HR Now Hiring: Assemblers with Electrical Wiring Experience! Join a leading manufacturing team and earn $25.50 per hour while working a convenient Monday-Thursday schedule with three-day weekends! Pay & Schedule Pay Rate: $24.50/hour + $1.00 shift differential = $25.50/hour Shift: 2nd Shift, Monday-Thursday, 2:15 PM - 12:45 AM Overtime Opportunities: Saturdays, 2:15 PM - 12:45 AM as needed Training: Must be available to train on 1st Shift, Monday-Friday, 6:00 AM - 2:30 PM What You'll Do Assemble electrical and mechanical components according to work orders and assembly drawings Perform electrical wiring and connections on finished products Read bills of materials, routing instructions, and assembly documentation Inspect parts and finished products for quality

Lake Saint Louis, MO 63367 • (42.4 miles) • Full Time • $24.00 to $27.00 / hr • 11/3/2026

Service Technician II Who We Are: RBM Partners is a close-knit team of collaborators, innovators and leaders who deliver exceptional service through quality communities and memorable moments. RBM Partners seeks to provide the best-in-class service and product in the markets it serves. RBM Partners is focused on providing the utmost in ethical practices and is intentional about fostering work environments that promote life balance. Job Description: RBM Partners is seeking an experienced Service Technician. The Technician is responsible for the overall maintenance and upkeep of our multifamily real estate assets. This role requires in-depth knowledge of HVAC systems, technical proficiency, and a commitment to delivering high-quality service. Job Duties: • Assist the Service Manager with high

High Ridge, MO 63049 • (35.6 miles) • Full Time • 11/1/2026

POWER YOUR FUTURE! Every time you turn on a light switch, H-J is helping to deliver that power! The H-J Family of Companies is a growing and innovative manufacturer and distributor of electrical components for power distribution. Located in High Ridge, Missouri since 1969, H-J has built our company on the quality of our products and services. We are looking for individuals with the drive and desire to join our team and help us continue to grow. Summary: This entry level position encompasses many duties, including sandblasting, part cleaning, and cut saw operation while ensuring the highest level of quality of all parts produced. Essential Functions Follow production paperwork (work orders). Sandblast brazed copper and welded aluminum components. Deburr parts with drill press and clean part

Ballwin, MO 63011 • (39.6 miles) • Part Time • $17.00 to $23.00 / hr • 11/1/2026

Position Overview Appell Striping & Sealcoating is seeking a dependable, hard-working Technician to support our line striping and sealcoating crew. This is a hands-on field position for someone who takes pride in quality work, shows up on time, works well with a team, and is willing to learn the pavement maintenance trade. The Technician will assist with daily jobsite setup, pavement preparation, line striping, sealcoating, crack filling, cleanup, equipment care, and overall production. This role is ideal for someone who enjoys working outdoors, can handle physical work, and wants to grow with a professional pavement maintenance company. Core Field Responsibilities • Assist with line striping, sealcoating, crack filling, pothole repair prep, and other pavement maintenance services • Load a

Fenton, MO 63026-4340 • (41.1 miles) • Full Time • 11/6/2026

Description: Production Castings, Inc. is seeking a skilled Robotics & Automation Technician to help maintain, troubleshoot, and improve the automated systems that keep our manufacturing operations running efficiently. This position plays a key role in supporting industrial robots, PLC-controlled equipment, servo systems, sensors, and other automation technologies throughout our zinc and aluminum die casting facility. The ideal candidate enjoys solving complex technical problems, has strong electrical and mechanical troubleshooting skills, and is passionate about continuous improvement in a modern manufacturing environment. Maintain Automated Equipment Perform preventive and predictive maintenance on industrial robots, automated production equipment, servo systems, sensors, and end-of-arm

Warrenton, MO 63383 • (41.8 miles) • Full Time • 11/5/2026

Key Responsibilities: Respond to roadside and on-site service calls using a fully equipped service truck. Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial. Diagnose and repair tire-related issues and perform light mechanical repairs as needed. Inspect tires and wheels for wear, damage, and proper inflation. Perform fleet inspections and preventative maintenance checks when required. Operate tire pressure monitoring systems (TPMS) and other diagnostic tools. Maintain the service truck, tools, and equipment in safe operating condition. Follow DOT regulations, company safety policies, and traffic laws at all times. Provide exceptional customer service, including clear communication of service details and timelines. Ass

Fenton, MO 63026 • (39.6 miles) • Part Time • $20.00 to $25.00 / hr • 11/4/2026

Benefits: Company parties Free uniforms Opportunity for advancement Training & development Benefits/Perks Competitive wages and a flexible working schedule (including opportunities to travel) A challenging, fun atmosphere with a great team Training opportunities and advancement within the company Benefits available after a probationary period Company purpose statement is “to provide our employees with a workplace that is considered a vehicle for personal and professional growth”. We hire based on our company values - The DRIVEN Principles. You will be with like-minded individuals. We are seeking a pavement maintenance techfor our crew. As the PMT, you will perform a wide variety of projects for various clients across the city. Company Overview EverLine Coatings and Services STL is a premie

Saint James, MO 65559 • (31.1 miles) • Full Time • 10/30/2026

Position Summary: We are looking for skilled craftsmen with 3-4 years of woodworking experience, or equivalent applicable skills (such as manufacturing, carpentry, machinist, etc.), that have an aptitude and willingness to learn and work alone and with a team to build high-end custom cabinetry. Candidate must be able to work in a fast-paced environment and produce high-quality results from start to finish. Candidate Qualifications: Ability to read shop drawings and perform work assigned with no oversight needed. Can safely and efficiently operate table saw, chop saw, router, orbital sander, and pneumatic tools. Displays excellent communication skills. Expert knowledge of millwork products including laminates, solid surface, and painted finishes. Will demonstrate principles of safety for se

Barnhart, MO • (38.1 miles) • Full Time • 10/30/2026

About us At Kodiak, you're not just taking on a job, you're becoming part of a team that thrives on grit, grace, and growth. We've built our reputation on overcoming challenges, navigating economic shifts with resilience, and staying true to what matters most: people. We're committed to more than just delivering exceptional projects. We invest in relationships, support our team's development, and give back to the communities we serve. Our mission is to grow while holding fast to our values of dedication, integrity, and quality. When you join Kodiak, you join a family. A place where your work has purpose, your contributions are valued, and your future is built right alongside ours. What you'll do You'll independently install, service, and repair commercial overhead doors, gates, industrial

Chesterfield, MO 63005 • (38.3 miles) • Full Time • 10/24/2026

With 100 years of success, Nixon Power Services is the world’s largest distributor of Kohler Power generators. We operate in an environment where flexibility and a willingness to take on new responsibilities keeps things interesting! We value team members who are passionate, down to earth and have a “can do” attitude, and enjoy providing premium services to customers. We’re looking for a Generator Technician to join our team! This role is essential to our business and requires a hands-on approach that ensures high-quality and timely service! You do what it takes to keep generators in top-notch condition and help keep our business humming along smoothly for a world-class customer experience. What’s in it for you? Competitive hourly rate + overtime opportunities. Company truck + fuel card. F

Arnold, MO 63010 • (40.7 miles) • Full Time • 10/21/2026

Well established local Pool and Spa service provider is looking to hire a permanent full time Service Technician. Position is located Arnold, MO, job sites located in surrounding St. Louis Metro area. Looking for an employee with an exemplary driving record and personal background, reliable transportation, dependable, punctual, friendly outgoing personality with excellent customer service skills and can work well within a team. SPA & POOL EXPERIENCE A PLUS. Intermediate plumbing work. Troubleshooting electronics. Place and receive parts/supply orders. Use online calendar and ticketing system. Interact with Dealers and Vendors. Possible retail showroom sales. Must be looking for long term employment. Candidate must have a working knowledge of electrical circuits and be able to lift approxim

Ballwin, MO 63021 • (38.5 miles) • Full Time • 10/20/2026

For 40 years, Hoist & Crane Service Group has been a leader in the crane service industry. We offer award winning safety programs, being honored each year since 2014 by the National Safety Council, and a culture that strives to always operate within our 5 Marks of Safety, Integrity, Respect, Effectiveness, and Legacy. We are a company that values longevity in employees and responsiveness in an employer. GENERAL JOB DESCRIPTION Hoist & Crane Service Group is seeking skilled technicians with proven electrical inspection, service, and repair experience. The qualified candidate will be competent and experienced with the installation and repair of Commercial and Industrial Rolling and Panel Overhead Doors, Dock Levelers, Dock Locks, Safety Gates and Truck Shelters. They will have the ability to

Wentzville, MO • (43.6 miles) • Full Time • 10/20/2026

Cochran is a growing civil engineering, construction testing, and land surveying firm with 7 offices in Missouri. Cochran specializes in public and private projects including municipal, commercial, residential, transportation, water/wastewater, site development, retail, planning, and interior design. With a team of 100+ professionals across multiple offices, Cochran brings unique knowledge and understanding to each client's project. The firm is guided by its core values of teamwork, excellence, quality, and trust, ensuring outstanding customer service and principal involvement in all project phases. Cochran's Wentzville, Missouri location is looking for a Materials Testing Field Technician to join our team. Who are we looking for? The ideal candidate would have a minimum of 1-2 years of pr

Cuba, MO 65453 • (19.6 miles) • Full Time • 11/6/2026

We are looking for a CNC Machinist! WE OFFER GREAT BENEFITS! Attractive Monthly Manufacturing Performance Incentives! Year-round climate-controlled work environment Weekly payroll Start accruing vacation from day one! Accrued each pay period, you will receive 96 hours of paid time off in your first year and up to 3 weeks by year 3! Anniversary paid day off awarded each year. Nine (9) paid holidays including the day after Thanksgiving, Christmas Eve, and New Year's Eve. Complete benefits package including Health, Dental, Vision, and Voluntary Life. Benefits Paid 100% by Seyer Industries : HealthiestYou (Teledoc services), Basic Life Insurance, Accidental Death and Dismemberment, Employer Assistance Program (EAP), Short-term disability, Long-term disability, and Parental Leave. 401(k) with e

Rolla, MO 65401 • (42.3 miles) • Full Time • $50,000 to $70,000 / yr • 11/6/2026

Benefits: Simple IRA Health insurance Opportunity for advancement Paid time off Training & development Bonus based on performance Competitive salary *Seeking currently licensed & experienced applicants with aspirations to become an Insurance Agent* ROLE DESCRIPTION: Do you aspire to some day run your own business, be an advisor looked to in your community, and lead a team? Angie Dell Foster - State Farm Agent is searching for an outgoing and customer-focused individual who can recognize opportunities and strategically turn leads into long-lasting customer relationships. As part of my successful team, I will assist in developing your business leadership skills, industry and State Farm business acumen, as well as sales and marketing experience. This development and mentoring can lead you in

Lake Saint Louis, MO 63367 • (42.4 miles) • Part Time • $17.06 / hr • 11/5/2026

St. Charles Community College (SCC) is located just west of St. Louis, in the heart of growing St. Charles County. At SCC, we have a passion for student success. We serve a growing diverse student population, and we are committed to increasing the diversity of our faculty and staff who will help prepare our students for a global society. Qualified candidates will have demonstrated success in serving diverse student populations. SCC seeks a Part-time t emporary Theatre Production Assistant (Back of House) to perform various duties associated with the scheduled operation of the theatre and affiliated technical areas on campus. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Assists with the coordination usage of theatre facilities by inside and outs

Arnold, MO 63010 • (40.7 miles) • Full Time • $17.00 to $20.00 / hr • 11/5/2026

Job description: Job Overview 1st shift We are seeking a dynamic and detail-oriented Sheet Metal Worker / Press Brake Operator / Metal Setup Technician to join our manufacturing team. In this role, you will be responsible for fabricating, assembling, and setting up sheet metal components with precision and efficiency. You will operate various machinery, including press brakes, CNC laser cutters, and stamping presses, ensuring high-quality production standards are met. Your expertise in blueprint reading, tooling setup, and quality inspection will be essential to delivering top-tier metal products. This position offers an exciting opportunity to work in a fast-paced environment where craftsmanship and technical skills drive success. Responsibilities Operate and set up sheet metal fabricatio

Fenton, MO 63026 • (39.6 miles) • Full Time • 11/4/2026

Position Title: Hyrdomat Operator Department: Machine Shop Location: Fenton, MO Reports To: Production Supervisor - Machine Shop Classification: Hourly - Non-Exempt Shift Options: Weekend Shift: 5:00 AM-5:00 PM Friday-Sunday | 2nd Shift: 3:15 PM-1:15 AM Monday-Thursday We're looking for an Hydromat Machine Operator with hands-on Hydromat experience to join our Machine Shop. This role is focused on operating Hydromat rotary transfer machines, monitoring production, making routine adjustments, checking part quality, and identifying machining or tooling issues. If you have experience running Hydromat equipment, understand precision machining, and take pride in producing consistent, high-quality parts, we'd love to meet you. Why Join Control Devices? Climate-controlled, air-conditioned manufac

Gerald, MO • (18.6 miles) • Full Time • 11/3/2026

Job Summary: The Blender Operator at Newly Weds Food in Gerald, MO will be responsible for operating and maintaining the blender machine to process raw ingredients and produce dry food blends. This is a full-time, 3rd shift position that requires an individual who is detail-oriented, able to work independently, and has a strong understanding of food processing equipment. The Blender Operator will report to the Production Supervisor and work closely with other team members to ensure the efficient and safe production of high-quality dry food blends. Compensation & Benefits: • Competitive salary based on experience + bonus potential • Outstanding benefits package, including dental, vision, and life insurance • Paid time off and holiday pay • Opportunities for growth and development within the

Washington, MO 63090 • (22.4 miles) • Full Time • 10/30/2026

Description: We are hiring Grinder Operators to become an integral part of our production team in Washington, MO. Grinder Operators play a vital role in our plant operations by operating grinding machinery that shapes and finishes titanium sheets to precise customer specifications. No prior experience working with titanium metals or machinery? No problem - this entry-level role offers you hands-on training! This role thrives on problem solvers who communicate clearly and collaborate well in a team environment. Key Responsibilities: •With the assistance of roller tables, physically lift, move, and flip titanium sheets into and out of the grinder tool, which cuts and finishes the metal •Visually inspect sheet surfaces for imperfections and use grinding tool to remove defects •Utilize a micro

Union, MO 63084 • (15 miles) • Full Time • $17.25 / hr • 10/27/2026

Sewing Support Associate NORMAL SCHEDULE: Monday-Friday 6:30 AM – 3:00 PM OVERTIME: May be required during peak seasons; shift lengths may increase to 9-10 hours M-F and/or occasional Saturday shifts PAY FREQUENCY: Weekly SALARY: Starting at $17.25, depending on experience ABOUT THE ROLE: Children's Factory is looking for a Sewing Support Specialist to help keep our sewing department organized, efficient, and running smoothly. In this hands-on manufacturing role, you'll support sewing machine operators by preparing materials, moving completed work, and helping maintain a steady production flow. This role is physically active and requires frequent movement throughout the production area, including constant bending over sewing tables and handling materials during the workday. Success in this

Washington, MO 63090 • (22.4 miles) • Full Time • $23.71 to $27.61 / hr • 10/27/2026

Description: Pay / Benefits: Pay: $23.71/hour plus .75 shift premium for 2nd shift and $1.00/hour shift premium for 3rd shift Company Overview WEG: Our Company: Founded in 1961, WEG is one of the largest electric machine manufacturers in the world. We employ over 47,000 people globally and offer a diversified and integrated product line, with sales in more than 135 countries. Our U.S. operations are expanding rapidly, and we’re looking for dedicated individuals to help us achieve our ambitious growth plans. Our Culture: We value each individual's contribution to our success and motivate our team through integrity, ethics, and continuous support for personal development. We prioritize professional and personal growth opportunities, human rights, diversity, and environmental sustainability.

Fenton, MO 63026-2541 • (41.1 miles) • Full Time • 10/25/2026

Description: We are seeking a detail-oriented and physically capable Rebar Fabrication Associate to join our team. In this role, you will be responsible for fabricating and preparing rebar for use in concrete construction projects. You will work closely with your team to ensure that rebar is accurately cut, bent, and shaped according to blueprints, design specifications, and safety regulations, contributing to the structural integrity and safety of our projects. Responsibilities: Rebar Cutting & Bending: Operate rebar cutters and benders to cut, bend, and shape rebar according to blueprints and project requirements. Accurately measure and mark rebar to ensure correct fabrication. Follow detailed instructions to produce rebar that meets the required sizes and specifications. Material Handli

Fenton, MO 63026 • (39.6 miles) • Full Time • $18.00 to $22.00 / hr • 10/24/2026

Extrusion Machine Operator - Stay / Sign-On Bonus! Sinclair & Rush is a rapidly growing, world leading multi-processor of plastic components. Our mission is to provide innovative solutions for our customers that add value to their products. We offer a safe and environmentally friendly workplace for our employees and are known for the great care we take with clients and employees alike. The Position : We are looking for 1st, 2nd and 3rd shift extrusion operators at our Fenton facility. Initial pay is based on experience, but we strive to make employee development a priority and offer step and pay progressions. You'll Love: Stay & Sign-On Bonus $2 Shift Differential Instant Paid Time Off (PTO) Quarterly Production and Safety Bonuses Career Guidance Learning and Development Employee Appreciat

Wentzville, MO 63385 • (42.6 miles) • Full Time • $19.50 to $20.50 / hr • 10/24/2026

Superior Home Products is an established manufacturer of cultured marble located in Wentzville, MO. We are currently looking for a responsible, motivated, and energetic person to fill a Full-Time position in our Spraying Department of the Mold Set-Up Area. This entails mixing and spraying gelcoat on fiberglass molds in the required color to fulfill orders on the production schedule. While spraying experience is helpful, it is not required. Responsibilities include: Verify orders each day by reviewing the daily production schedule Ensure molds are clean and prepared correctly before spraying Masking molds with paper, waxing molds, and ensuring all items are verified for quality before moving forward to production Ensuring all Safety and Quality standards are followed Requirements: Using and