Springfield, MO 65804 • (5.8 miles) • Full Time • 10/7/2026

Position: Electrical Engineer IILocation:Schaumburg, IL / Albuquerque, NM / Avon, CO / Hunt Valley, MD / Belleville, IL / Boise, ID / Chicago, IL / Corona, CA / Dallas, TX / Davenport, IA / Lakewood, CO / Evansville, IN / Ft. Collins, CO / Ft. Myers, FL / Irvine, CA / Milwaukee, WI / Newport, KY / Northwest Arkansas / Orlando, FL / Overland Park, KS / Palm Springs, CA / Phoenix, AZ / Riverside, CA / San Diego, CA / Seattle, WA / Springfield, MO / St. Louis, MOYears of Experience: 3-5 YearsAbout RTM:RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensiv

Springfield, MO • (7.5 miles) • Full Time • 10/5/2026

Looking for dependable employees for the installation of commercial roofing and sheet metal systems. No experience needed (but accepted) as you will receive on the job training.Must be able to do the following tasks:Climb ladders/stairs, Carry/hold up to 75 lbs, Operate hand tools, Numerous body motions (stand/kneel/bend/reach/squat), Not scared of heights, ability to work outdoors in all conditions.Starting pay with no experience of $17.00/hr plus benefits with opportunity for rapid advancement.\nCompany DescriptionCommercial Roofing, Sheet Metal and Exterior Wall Cladding contractor located in Springfield, MO since 1930.Company DescriptionCommercial Roofing, Sheet Metal and Exterior Wall Cladding contractor located in Springfield, MO since 1930.

Greenfield, MO • (41.1 miles) • Full Time • 10/4/2026

DescriptionIronite Foreman Our Garden Segment is searching for an experienced Foreman for our Greenfield, Mo. Ironite Plant location. This position requires qualified candidates to be safety conscious and able to perform required functions in a productive manner, working with tight schedules and deadlines. Shift Details:1 Position for 1st shift: 8:00 am – 4:30 pmKey Responsibilities:Direct the workflow of other employees to ensure that product produced is correct and good quality.Repair or report machine problems immediately.Work closely with the machine operators to maintain quality standards.Maintain a safe work environment as well as directing all staff to work safely and effectively.Properly train staff, enabling them to perform their assigned work task for the shift.Qualifications:Mus

Springfield, MO • (7.5 miles) • Full Time • 10/2/2026

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances.**Job title: **CNC Machine OperatorLocation:OnsiteShift: 1st Shift: Monday - Friday 7:00 AM – 3:30 PM, OT and WeekendsPay Range: Up to $21.71/hr. Guaranteed increase after 3 months.Perfect attendance bonus up to 2 additional days off and $1000.00About UsImagine a company with techn

Springfield, MO 65802 • (11 miles) • Full Time • 9/30/2026

Company: Hutchens IndustriesLocation: Springfield, MOEmployment Type: Full-TimePosition OverviewHutchens Industries is seeking a Mechanical Drafter / Designer to join our engineering team. This position will use 3D CAD software to update existing engineering drawings, create new designs, and provide technical support for our manufacturing and customer service teams.The ideal candidate has some experience or training with CAD software, strong attention to detail, and a mechanical aptitude. A college degree is not required for this position.This is an excellent opportunity to grow your technical and design skills while working directly with an experienced engineering and manufacturing team. Over time, the position will develop into product design and development work, with opportunities for

Springfield, MO 65803 • (10.3 miles) • Full Time • 9/22/2026

SFI is looking for Grinders with 3 years or more experience in tank building.General Summary:Grinds and smoothes surfaces of steel parts or tanks up to 180 grit prior to finishing operations, with assistance from Bay Supervisor or Master Craftsman. This position is classified as a safety sensitive position, see Limitations and Disclaimer for additional information.Essential Job Functions:Buffs welds and polishes ground areas to produce smooth, unmarred surface.Selects correct grade of belt, and replaces worn belts.Examines all workpieces for defects after completion.Learns all grinding tools and types of abrasives to be used.Completes manufacturing documentation in a timely manner.Follows all safety guidelines as noted in Safety Manual.Assists all supervisors and performs other duties as n

Springfield, MO 65806 • (8.1 miles) • Full Time • 9/16/2026

Creative Modular Construction (CMC) is seeking a dedicated and detail-oriented Quality Inspector to help ensure our modular units meet the highest standards of craftsmanship, safety, and quality. This role is critical to maintaining excellence throughout the construction process and supporting our mission of delivering exceptional products to our customers.As a Quality Inspector, you will work closely with production teams to verify compliance with design specifications, identify opportunities for improvement, and contribute to a culture of quality and continuous improvement.Position SummaryThe Quality Inspector is responsible for inspecting modular units throughout various stages of production to ensure compliance with company standards, project specifications, and applicable quality requ

Springfield, MO 65803 • (10.3 miles) • Full Time • 9/16/2026

JUMPSTART, ADVANCE, AND LOVE YOUR CAREER WITH SMSI!At SMSI, we believe in our employees. With above-average pay, extensive benefits, vocational training, and a family-based atmosphere, we are always looking for people seeking to improve themselves. Together, our team strives to perform the best service possible for customers. We thrive on challenges and believe in fair compensation for dedication, detail, and professionalism. Apply today!We are seeking an Industrial / Sanitary Welder to join our team!Benefits:MedicalDentalVision401(k)Life InsurancePaid Time OffCompensation will be determined based on the candidate's experience and qualifications.Compensation:$30 - $31 hourlyResponsibilities:Produce and create finished metal goods.Set up and fix a variety of machinery and parts.Adhere to th

Springfield, MO • (7.5 miles) • Full Time • 9/29/2026

Job Title: Manufacturing LaborerJob DescriptionThis role involves performing a variety of general labor tasks in a metal manufacturing environment, including preparing parts for welders, machine operators, and metal fabrication workers, as well as assisting with material handling, loading, and unloading. You will work with tape measures, hand tools, and power tools to support efficient and accurate production.ResponsibilitiesPrepare metal parts and components for welders, machine operators, and metal fabrication workers according to production requirements.Assist with material handling activities, including moving, staging, loading, and unloading materials and finished products.Use a tape measure to accurately measure materials and verify dimensions before and after fabrication.Operate and

Lebanon, MO 65536 • (44.8 miles) • Full Time • 9/28/2026

Fiberglass Tank Solutions (FTS) is centrally located at Lake of The Ozarks in Camdenton, MO. We are expanding and hiring Manufacturing Positions as we continue growing in our 13th year of business!Looking for a well-rounded, organized, & hard-working person who can follow directions and maintain an efficient workplace independentlyDo you have experience, but looking for possibly a better fit?? We have competitive pay!!!Depending on your trade experience, we’re starting at $18 to $25+ an hour!!! Minimum 40+ hours per week.Full-Time Employees gain benefits after 90 days, including health, dental, vision, sick pay, and simple IRA!! Come be a part of our family-owned operations at FTS!!!What We’re Looking For:We’re hiring Manufacturing Laborers who are:Hard-working, dependable, and organizedAb

Springfield, MO 65802 • (11 miles) • Full Time • 10/10/2026

Why You’ll Love This RoleHands-on work with mechanical components, including fasteners, bearings, motors, and structural assembliesIdeal for candidates with a background in mechanical assembly, machine building, or equipment installationContribute to the design and build of innovative systems used globally in food productionBe part of a collaborative team in a supportive, values-driven workplaceAccess to medical, dental, and vision insuranceParticipate in a generous 401(k) match programKey ResponsibilitiesRead and interpret shop prints and technical drawingsAssemble mechanical components to precise specificationsTroubleshoot and verify proper fit, function, and alignment of assembliesUse measuring tools and mechanical aptitude to ensure quality craftsmanshipFollow all safety protocols and

Springfield, MO 65804 • (5.8 miles) • Full Time • 10/9/2026

OverviewFurniture Assembly TechnicianOpportunity is part-time, on-going Assembly work for both in-store (Nationwide Office supply chain) and in-home furniture assembly. As an Independent Contractor with SFS, Inc. you will be assembling RTA Furniture but we also have great opportunities for those who possess experience with TV Wall Mounts, and assembling Gas Grills, Sporting Goods, Bicycles, and Display Racks.Let’s get started as an independent contractor, it’s quick & easy; CLICK APPLYThings to Consider:You control when and how much you workCreate your work scheduleBe your own BOSSWhat we Offer:Competitive payDailyPay – work today, get paid tomorrowThings you should know:Must possess merchandising and/or commercial furniture assembly experienceAbility to assemble products according to clie

Rogersville, MO 65742 • (5.7 miles) • Full Time • 10/7/2026

POSITION SUMMARYThe Production Assembler plays a crucial role in the manufacturing process, contributing to the manufacture of high-quality products. Responsible for executing assembly tasks according to the work instructions, this role requires precision, attention to detail, and adherence to quality standards. The Production Assembler must achieve set production goals, maintain a safe and clean work environment, and leverage Lean manufacturing tools to enhance efficiency.SHIFT: Monday - Thursday 6:00am-4:30pm + Fridays as business needs CORE FUNCTIONS· Follow established work instructions to properly assemble products and/or different parts of products.· Achieve established goals or deadlines set for specific work areas.· Operate required equipment per safety guidelines.· Complete all re

Springfield, MO 65806 • (8.1 miles) • Full Time • 10/5/2026

Our History:The Storyteller Overland vibe started out as a drawing on a restaurant napkin in 2017 illustrating a desire to help people live more adventurous lives. Back then, very few had ever heard of an adventure van, and some at the restaurant table with Founder Jeffrey Hunter had doubts it would ever sell.The company officially launched in 2018 with a humble yet confident team of seven employees. Over the next year, we worked on launching our MODE 4x4 and finding dealer partners to work with, and finally, the dream was turning into a reality.We’ve been fortunate to be full speed ahead since then. We’ve added sister companies to our galaxy and built out quite the impressive team – hopefully you included. We hit 500 vans built, then 1,000, then so many more that these milestones became d

Springfield, MO 65802 • (11 miles) • Full Time • 9/26/2026

SRC Automotive, Inc. is a leader in the remanufacturing of engines used in the Automotive, Marine, Natural Gas & Oil and Power Systems industries.At SRC, we do things differently. Our associates take pride in their reputation as businesspeople who understand how they impact our bottom line. Their excellent technical skills – accompanied by their role as employee-owners – has become our legacy.Assembler – 1st shift 5am to 3:30pm Monday-Thursday, with frequent overtime required on Fridays, and occasional Saturdays.Our Assemblers may work in assembly, testing, packaging, or machining areas of our shop. All work is done according to customer specifications and company processes. Engine knowledge is helpful but not required!Primary responsibilities include:Perform production duties by following

Springfield, MO 65804 • (5.8 miles) • Full Time • 9/25/2026

POSITION SUMMARY:Reporting to the Production Supervisor, this position will perform the assembling of major components, and will perform minor machine set-ups, general maintenance, and area housekeeping. This position will require decisions determining the quality of the products and services being offered. Physical effort requirements consist of regular lifting, pushing and pulling material. ESSENTIAL DUTIES AND RESPONSIBILITIES:Assemble major components using various machines and tools.Solder materialsParticipate in and support the principles of Open Book Management and recognize the responsibilities of being an owner of the company.Required to follow safety standards. Required to wear all personal protective equipment in designated areas.Work attendance must be exemplary.Perform set-up,

Springfield, MO 65807 • (9.4 miles) • Full Time • 10/5/2026

At KCI Construction, we are not just building structures; we are building futures.Are you ready to build your future with a company that values your skills, dedication, and growth? Join us at KCI Construction, where your skills and talents will help shape the future of our communities. Together, we can build something great!About us:KCI is one of the more diverse self-performing contractors in the Midwest, with the expertise and ability to successfully perform on a wide range of projects. Any one of us can be found working on a design-build multi-story building one day, then a wastewater plant the next, and highway infrastructure after that.KCI began in 1922 and is now an employee-owned construction company with offices in St. Louis and Springfield, Missouri. We are a team of builders and

Springfield, MO 65804 • (5.8 miles) • Full Time • 10/2/2026

A Springfield company is currently looking for individuals with recent experience in operating CNC Lathes and Mills. The right fit for this role must be able to read calipers for this position. The ideal candidate will be able to read blue prints as well. Candidates with machinist experience are particularly desired, and compensation can increase with experience.Full Time Evaluation Hire PositionM-F 8:00 am-5:00 pm$16.00 / hourHow to Apply:Call Todayto schedule an interview **Send **Apply online**at www.expresspros.com/SpringfieldMOLooking for work? Express matches you with free local jobs that fit your schedulefrom short-term gigs to new careers!Why Choose Us?100% Free: No fees for job seekers.Local Links: Direct access to hiring businesses.Your Way: Choose flexible or permanent roles.EXP

Springfield, MO 65803 • (10.3 miles) • Full Time • 9/27/2026

Company Overview Doing Steel Fabrication, LLC has a proud history of delivering top-quality steel fabrication services since 1986. With extensive facilities and a dedicated team, we serve projects across the country, emphasizing excellence and innovation in our industry. Doing Steel is a family-owned company who believe in our people. We support our people through a strong benefits package, including 401K with match, and weekly pay.JOB DESCRIPTION Machine Operator 1This role is entry level and requires basic knowledge of mechanical and structural processes and equipment. Machine Operators 1 will need to have the ability to operate or learn to operate (within one year) numerous machines and equipment. The ability to understand verbal and written instructions is essential and ability to work

Springfield, MO 65803 • (10.3 miles) • Full Time • 9/24/2026

CSI is hiring for a Manufacturing Materials Specialist at our Springfield, MO location.Our employees are actively engaged in our company’s culture, committed to our core values and have a passion for excellence. The successful candidate must be able to plan and execute his/her daily work requirements with little supervision and thrive as an individual and team contributor. This job requires a high level of accuracy and attention to detail and utilizes database software that is heavily relied upon to perform the tasks of this position. We offer an excellent benefits and compensation package.The Manufacturing Material Specialist duties include:Primary Functions:InboundCheck in and receive all types of material per procedureReceive and document lot tracked material per procedurePut away parts

Springfield, MO • (7.5 miles) • Full Time • 10/10/2026

Finding the right place to grow your career isn't (over) easy, so we're here to help by sharing a few reasons why the grass is greener at Vital Farms. We think you'll appreciate our focus on Conscious Capitalism, which drives business decisions that benefit all our stakeholders (leading to even better business results). You might be drawn to our innovative approach and refusal to settle for the "way things have always been done." Or you could find it exciting to grow your skills while working for an industry-leading brand. Whether you're into our values, our brand, or our egg-cellent puns, we hope you'll join our Crew and help us change the world 108 square feet at a time!At Vital Farms, we are proud of our incredible stakeholders, and the diversity they represent from all areas and commun

Springfield, MO 65803 • (10.3 miles) • Full Time • 10/8/2026

Structural and Sheet Metal Welder Cooling Tower Manufacturing Is this you? Do you enjoy setting wire feed speed, current, and gas to get consistent, clean MIG beads?Are you confident rigging heavy parts with an overhead crane and positioning them for accurate fit-up?Can you read prints, measure precisely, and weld in flat, vertical, and overhead positions?Do you like varietymoving between fabrication, assembly, and different production lines?If you answered yes, you’ll thrive at SPX Cooling Technologies, part of SPX Technologies’ HVAC Cooling platform, where we build the Marley, Recold, and SGS solutions trusted by hospitals, data centers, and power plants. What you’ll work on Operate an overhead crane to safely maneuver frames, panels, and subassemblies.Tune welding leads, current, feed,

Springfield, MO 65803 • (10.3 miles) • Full Time • 10/7/2026

Join our maintenance team powering iconic brands The French's Food Company (part of McCormick & Company, Inc.) is hiring a full-time Industrial Maintenance Technician for our Springfield, MO plant. This role reports to the Maintenance Manager and is central to keeping our packaging and processing equipment safe, reliable, and efficient. Why this role matters Reduce unplanned downtime through proactive preventive and predictive maintenance.Boost reliability by executing mechanical/electrical repairs and major rebuilds.Strengthen the team by coaching Production Technicians and junior Maintenance Technicians.Protect our people and products through rigorous adherence to safety and GMP standards. What you’ll do Perform complex mechanical work and intermediate electrical troubleshooting, includ

Springfield, MO 65803 • (10.3 miles) • Full Time • 10/6/2026

Description: RNR Tire Express is a national franchise retailer that provides safe, quality tires and wheels with affordable payment options.At RNR we have built a culture around “SERVING our customer and not just providing them customer service”. We support and empower our employees with excellent training and tools which enables them to provide our customers with a unique and exceptional experience.RNR Tire Express started as a family business over 20 years ago in a small shop located in Tampa, Florida. Since then, we have grown to over 160 stores across 26 states, and continue to open more locations across the country each year. While we have expanded far beyond that little shop in Tampa, we have never lost our core value of FAMILY.At RNR, we believe having a healthy work / life balance

Springfield, MO • (7.5 miles) • Full Time • 10/6/2026

Position Summary We are currently searching for a Fabricator with a basic understanding and competency in welding and grinding. Responsibilities cover a wide range of shop-floor tasks including manual welding and grinding, machine operation, equipment rigging, and basic electrical assembly. This is a hands-on skilled role suited for individuals with foundational experience in welding and grinding, especially stainless-steel work. Responsibilities Perform stainless steel welding, grinding, and cutting operations in all positions Set up and operate machines (presses, shears, saws, punches, etc.) per blueprints Operate mobile crane equipment under 20,000 lbs. and assist with rigging/hoisting Operate spray foam insulation, sandblast, and painting equipment Perform tinning, complex soldering,

Branson, MO • (37.1 miles) • Full Time • 9/30/2026

Design the projects that shape Branson's future. Turn ideas into infrastructure as you create the plans behind the roads, utilities, parks, and public projects that keep our community growing.What You'll DoDesign and update CAD drawings for roads, utilities, parks, and public infrastructure projects.Collect field data and assist with surveying, layout, and staking using specialized equipment.Support engineering projects by creating maps, plans, reports, and as-built drawings.Help bring public improvement projects to lifefrom initial design through construction support.Collaborate with engineers and survey teams to build the future of Branson.Do you have what it takes for this exciting role?• Graduation from an accredited technical school program or a college or university with an Associate

Marshfield, MO 65706 • (17.4 miles) • Full Time • 9/27/2026

Company Description Tyler Coupling is located in Marshfield, MO. Tyler Coupling has been committed to being a safe workplace for team members, providing high-quality products to our customers and being a good neighbor in the community where we operate.The Tool & Die Maker is responsible for setting up and operating a variety of computer-controlled and mechanically controlled machine tools to produce precision metal parts, instruments, and tools.Job Description 1. Sets up and operates a variety of machine tools such as lathes, milling machines, band saws, surface grinders, visual grinders, radial drill presses, bench grinders and various hand power tools used in machining, assembling and repairing metal parts, progressive dies, injection molds, tools and equipment. Receives instructions fro

Springfield, MO • (7.5 miles) • Full Time • 9/24/2026

HiFyve has a client in Springfield, MO that is hiring for a Mechanical Design Engineer II role.Pay: $71K-$100KDay ShiftThis role performs and leads design and layout work across multiple major projects simultaneously, supporting each phase from concept through installation. The position converts technical requirements into detailed drawings, ERP records, and manufacturing documentation while ensuring quality, continuity, and continuous improvement throughout the design and production process.Key ResponsibilitiesTranslate specifications, sales orders, and technical data into detailed drawings and manufacturing documentationGenerate ERP records, parts lists, and requisitions to drive production demandsPerform engineering calculations, instrument sizing, and technical documentationReview cust

Springfield, MO 65802 • (11 miles) • Full Time • 9/20/2026

SRC Automotive, Inc. is a leader in the remanufacturing of engines used in the Automotive, Marine, Natural Gas & Oil and Power Systems industries.At SRC, we do things differently. Our employee-owners take pride in understanding how their work impacts the success of the business. Their technical expertisecombined with the mindset of ownershiphas helped build a culture focused on continuous improvement, innovation, and teamwork.Manufacturing Engineering TechnicianA Manufacturing Engineer - Controls & Automation is responsible forimproving manufacturing performance through the design, implementation, troubleshooting, and continuous improvement of automated equipment and control systems. This position serves as a technical resource for manufacturing operations, with particular emphasis on PLC

Marshfield, MO • (17.4 miles) • Full Time • 9/20/2026

Critical Infrastructure Mechanical Engineer Location: Onsite – Marshfield, MO Reporting to: DCO At STN, we don't just adapt to the digital future, we engineer it. Our mission is to help organizations thrive in a rapidly evolving technology landscape through strategic insight, cutting-edge solutions, and a security-first mindset. We provide end-to-end services spanning cloud consulting, AI infrastructure, and enterprise security, enabling secure, scalable, and future-ready transformation. As trusted advisors, we align IT investments with business outcomes that drive performance and growth, starting with deep strategic engagement and delivering tailored solutions built for long-term impact. Our approach is innovation-led and rooted in cybersecurity, with a focus on leveraging the right techn

Springfield, MO 65802 • (11 miles) • Full Time • 9/18/2026

Reporting to the Director Of Engineering & Quality, the QMS / Supplier Quality Specialist will provide support to the Quality team in the management of SRC Industrial's Quality Management System (QMS) and working with the company's component suppliers to ensure that all components meet Engineering and Quality requirements. The role involves developing and maintaining the SRC's QMS, assisting with the implementation of Quality Control solutions to ensure optimal production efficiency, product quality, and safety in a remanufacturing environment.ESSENTIAL DUTIES AND RESPONSIBILITIES: Manage the Quality Management System, including preparing SRC Industrial for ISO 9001 compliance. Assist with document control. Inspect supplier produced components for defects, determine component disposition,

Springfield, MO 65801 • (8 miles) • Full Time • 9/18/2026

Sr. Mechanical EngineerLead Engineering Projects. Solve Complex Challenges. Make an Impact.Our client is looking for a Sr. Mechanical Engineer to take a leadership role in engineering projects, product design, customer support, and project execution. This position offers the opportunity to lead engineering initiatives, work across departments, and influence projects from concept through completion.What You'll DoLead mechanical engineering projects from design through completionCoordinate engineering activities, schedules, project tracking, and cost controlReview product designs, drawings, specifications, and engineering documentationWork directly with customers to understand requirements and deliver engineering solutionsCollaborate with Sales, Manufacturing, Purchasing, and Project Managem

Springfield, MO 65802 • (11 miles) • Full Time • 9/15/2026

Since its inception, QPS has been assisting pharmaceutical, biotechnology and medical device companies with their drug development efforts by providing a full range of Neuropharmacology, DMPK, Toxicology, Bioanalysis, Translational Medicine, Early Stage Clinical and Phase I IV Clinical Research services. We welcome individuals who want to be part of our growing organization. QPS is an innovative, dynamic organization that strives to employ talented, caring and committed employees who will work collaboratively towards achieving our mission of improving human health and the quality of life. QPS offers challenging and rewarding work in its four core business areas and support functions. Underpinning the operation is a culture that values diversity, innovation and accountability. Employees are

Springfield, MO 65807 • (9.4 miles) • Full Time • 10/7/2026

SERVICE TECHNICIAN SALARY: $21.00 - 24.00/hour BENEFITS ELIGIBLE HOURS: FULL TIME LOCATION: Springfield, MissouriOur Service Department in Springfield, Missouri is looking to hire for a Service Technician that will operate during our 1st shift. Successful applicants will have excellent mechanical skills and thrive in a fast-paced working environment. This position requires a high degree of safety, accuracy, and productivity to ensure that our customers receive the excellent customer service they have learned to expect from Grizzly Industrial. This position also prefers at least 2 years’ experience as a safe and accurate forklift operator and basic computer literacy. Employees will be required to furnish their own tools.Job Responsibilities:Ability to repair and replace defective partsAssem

Republic, MO 65738 • (18.9 miles) • Full Time • 9/30/2026

Become part of our success story! A leading global solution provider for all sectors of intralogistics – that is us: SSI SCHAEFER. What we also are: A family business that invests in the expertise, passion, and talents of its employees.As one of the largest providers, we help our customers increase the efficiency and sustainability of their storage, picking, and transport processes using innovative technologies and software. From fully automated warehouses with customized service and maintenance packages to manual and semi-automatic systems, we offer cost-effective intralogistics solutions from a single source. Moreover, we are now a leading provider of software for internal material flow.SSI SCHAEFER: 8,600 people that work in 80 operating companies and 7 production sites worldwide and im

Marshfield, MO • (17.4 miles) • Full Time • 9/27/2026

Job Title: Experienced Chrysler TechnicianLocation: Don Vance Chrysler Dodge Jeep RamJob Type: Full-TimeAbout Us: We are a well-established automotive service center committed to delivering high-quality repair and maintenance services. We take pride in our skilled team, modern facilities, and dedication to customer satisfaction. We are currently seeking an experienced Chrysler Technician to join our growing team.Position Summary: The Chrysler Technician will be responsible for diagnosing, repairing, and maintaining Chrysler, Dodge, Jeep, and RAM vehicles. The ideal candidate has strong technical expertise, dealership experience, and a commitment to precision and efficiency.Key Responsibilities:Perform diagnostics, repairs, and maintenance on Chrysler vehicles according to manufacturer stan

Ozark, MO 65721 • (14.2 miles) • Full Time • 9/24/2026

As the premium provider of drinking water and water treatment services for the greater part of a century, Hall’s Culligan continues to innovate and expand our business nationwide by offering tailored solutions to meet the specific needs of each customer backed by our superior Culligan service.As a Culligan Service Technician, you'll play a critical role in the installation, service, and repair of our products and systems in customer homes and/or businesses. Our products includewater softeners, drinking water systems, and solutions for challenging water conditions.Why you’ll love working here:$21+/hour based on experience.Enjoy a 4 day work week (After training)You’ll receive paid time off (PTO) at a generous accrual rate.You’ll be eligible for a full benefits package, including a 401k with

Springfield, MO 65802 • (11 miles) • Full Time • 9/15/2026

Hayden Machinery is currently seeking a candidate to fill the open position of Service Technician at our Springfield, Missouri location. As a Service Technician, you will play a crucial role in ensuring the proper functioning and maintenance of our clients' heavy equipment fleet. You will diagnose, repair and maintain heavy machinery. Your expertise will help minimize equipment downtime, maximize productivity, and ensure the safety and satisfaction of our valued customers.Job SummaryThe Service Technician diagnoses, repairs, and maintains heavy equipment. This role involves troubleshooting mechanical, electrical, hydraulic, and pneumatic systems on a wide variety of heavy machinery. The ideal candidate is detail-oriented, highly skilled in equipment repair, and committed to delivering exce

Marshfield, MO 65706 • (17.4 miles) • Full Time • 10/1/2026

Every pizza needs a bit of pizzazz.That’s where you come in.Be a sauce boss and make hungry people happy as a Cook for Pizza Hut. That's right, you can earn some cashwhile making great pizza, pasta and wings!As a Pizza Hut Cook, you'll prepare menu items and have some cleaning duties. Youshould be a fun and friendly person who values customers and takes pride in creating and serving excellent food, and you must be at least 16 years old.Benefits we offer:Early wage accessInsurance coveragePizza Hut Perks discount programRetirement planFlexible spending accountsAccess to free GED testingTuition grants with Colorado Technical UniversityMeal discountsPlus training to help you learn your role and keep growing throughout your career.Be a part of a team that supports you and provides real opportu

Springfield, MO • (7.5 miles) • Full Time • 9/16/2026

Job Title:Quality Assurance Manager; Merchant TradingDepartment:Quality AssuranceLocation:Springfield, MO, or approved remote location.Reports To:Director Q&FSWage Plan/Exemption:SalariedSUMMARYThis position will directly support the Merchant Trading platform as the QA resource responsible for managing supplier–customer relationships regarding quality, documentation, specification development, product safety, and analytical evaluation for products offered by the platform. This position will also provide support by working cross-functionally with the corporate team, suppliers, and customers to provide guidance in support of LinkOne requirements and regulatory compliance. This role will own the Organic certification and Document Control programs for the platform. Experience with document con

Springfield, MO 65804 • (5.8 miles) • Full Time • 10/1/2026

Position: Mechanical Engineer IILocation:Schaumburg, IL / Albuquerque, NM / Avon, CO / Hunt Valley, MD / Belleville, IL / Boise, ID / Chicago, IL / Corona, CA / Dallas, TX / Davenport, IA / Lakewood, CO / Evansville, IN / Ft. Collins, CO / Ft. Myers, FL / Irvine, CA / Milwaukee, WI / Newport, KY / Northwest Arkansas / Orlando, FL / Overland Park, KS / Palm Springs, CA / Phoenix, AZ / Riverside, CA / San Diego, CA / Seattle, WA / Springfield, MO / St. Louis, MOYears of Experience: 3-5 YearsAbout RTM:RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensiv