Columbus, MS • (38.8 miles) • Full Time • 11/3/2026

MAINTENANCE TECHNICIAN Automation Personnel Services is looking for a Maintenance Technician for a company based inColumbus,Mississippi.Inthisrole, youwill primarily be responsible for repairing and maintaining machinery and mechanical equipment such as electric motors, pneumatic tools, conveyor systems, production machines and equipment. Pay Rate $22.00to $30.00per hour Schedule and Hours Monday through Friday, 800 am to 500 pm. Maintenance Technician Duties and Responsibilities •Observe mechanical equipment in operation to locate performance issues. •Dismantle equipment to gain access to and replace or repair defective parts. •Examine form and texture of parts to detect imperfections. •Inspect used parts to determine changes in dimensional requirements when fitting new parts. •Repair and

Grenada, MS • (45 miles) • Full Time • 11/3/2026

Job Title: Wiring Technician Job Description We are looking for a Wiring Technician to assemble, wire, test, and troubleshoot electrical control panels used in industrial chiller systems. This role is ideal for candidates with electrical assembly, panel wiring, manufacturing, HVAC, or maintenance experience. Responsibilities Assemble and wire electrical control panels following wiring diagrams Route and secure wiring according to quality and safety standards Perform testing and inspections to ensure equipment works properly Troubleshoot wiring and electrical issues Read and follow blueprints, schematics, and work instructions Maintain a clean and safe work area Follow all company safety policies and electrical standards Essential Skills Any wiring experience Proficiency in using hand tools

West Point, MS 39773 • (24 miles) • Full Time • $90,000 to $100,000 / yr • 10/31/2026

Job Summary Electronics manufacturing engineer that will assist with new product launch in our electronics assembly department. The candidate should have experience with IPC Standards, product testing, and BOE creation for circuit card assemblies and wire harnesses. Job Responsibilities Assist with basis of estimate creation by providing manufacturing flow times according to contractual requirements. Develop technical documentation, including work instructions and engineering drawings to support manufacturing operations. Assist in the development of jigs, fixtures, and manufacturing aids. Assist in the development of electronics manufacturing processes that adhere to ISO 9001 certification standards such as ESD, FOD, and material storage procedures. Optimize assembly line layouts to maximi

Shannon, MS 38868 • (43.6 miles) • Full Time • $38.00 to $50.00 / hr • 10/29/2026

Job Title: Quality Engineer Job Description The Quality Engineer plays a key role in ensuring that automotive interior components, specifically center consoles made from plastics and metal, meet stringent customer and industry quality standards. This position serves as the primary quality liaison to customers, overseeing qualification of new parts, maintaining compliance with automotive quality standards, and driving continuous improvement through data-driven analysis and robust documentation. Responsibilities Represent the manufacturing facility to designated automotive customers as the primary quality contact, building strong, professional relationships. Ensure all delivered parts meet customer specifications and are free from defects through rigorous quality control and validation proce

Bruce, MS 38915 • (37.2 miles) • Full Time • $14.00 to $15.00 / hr • 10/29/2026

Salary: $14 - 15 per hour + none Reference: 1178436-5 Are you a skilled assembler or assembly technician looking for rewarding work with the benefit of consistent pay? Join our network where your precision and expertise are valued. We offer flexible shifts and short-term mandates in light manufacturing, allowing you to choose work that fits your schedule while applying your technical skills to high-quality component assembly. Your responsibilities: - Precision assembly: perform complex or repetitive assembly tasks of components or products following detailed schematics, blueprints, or work instructions. - Tool use: safely utilize various hand tools, power tools, fixtures, and specialized equipment (e.g., soldering irons, crimpers, torque wrenches) as required by the assembly process. - Qua

Starkville, MS • (15.8 miles) • Full Time • 10/28/2026

Electrical Controls Engineer Location: Starkville, MS TalentBridge is supporting a well-established manufacturing company in the search for an Electrical Engineer II to join its engineering team at a manufacturing facility in Starkville, MS. This is a hands-on engineering role focused on PLC programming, machine controls, electrical troubleshooting, control system design, and commissioning. The engineer will work closely with manufacturing and engineering teams to improve equipment reliability, efficiency, and quality. Key Responsibilities Troubleshoot and resolve malfunctions with machine control systems Develop and modify PLC and HMI applications Program and troubleshoot ladder logic Work with Siemens and Rockwell/Allen-Bradley PLCs Support setup and commissioning of new systems and equi

Columbus, MS • (38.8 miles) • Full Time • 10/28/2026

Controls Engineer Fives DyAG Corp. is looking for a Controls Engineer to join our team based out of our Columbus, MS area. Fives DyAG's engineers work in a variety of environments and locations. The role requires strong technical knowledge, sound experience and people-skills, to effectively solve issues as they arise. Job Description: Creating and commissioning industrial controls systems, PLC software design, and HMI screens, for different industries and environments. Responsible for PLC/HMI code development, code installation, debug on job site, and commissioning of the complete system. Conducting the peripheral device programming, machine PLC programming, coordinate the machine debug, power-up, and machine validation with build and electrical teams. Ensure that systems are designed and

Columbus, MS • (38.8 miles) • Full Time • 10/28/2026

Job Description: Sr. level Siemens PLC programmer (TIA Portal) We offer attractive, competitive compensation and benefits including, medical, dental, 401k, short-term disability, AD&D, tuition reimbursement, and more. If you take pride in your work and are committed to personal and professional success, let's talk. Please visit www.zobility.com to learn more. Zobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India.

Columbus, MS • (38.8 miles) • Full Time • $44.00 to $53.00 / hr • 10/28/2026

Job Title: Controls Engineer Siemens Job Duration: 5 months contract Est. Pay Range: $45 to $52/hr on w2 Work Type: On Site (1st shift, 40 hours/week) Overview/ Responsibilities: We are looking to add a Controls Engineer who has senior level experience with Siemens PLCs. They will primarily be working with TIA Portal and must be able to program from scratch. The project is anticipated to be at least 5 months onsite in Columbus, MS. 1st shift, 40 hours/week. We cannot pay for expenses.

Columbus, MS 39701 • (34.4 miles) • Full Time • 10/27/2026

Build a strong Foundation both professionally and personally with a career at KFC! We’re looking for people who love serving customers, have experience in the restaurant industry and who want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun and friendly service to our customers, KFC is the perfect place to learn, grow and succeed! We offer the following: A commitment to promote from within Training and mentorship programs Tuition reimbursement and scholarship opportunities Reward and recognition culture Competitive Pay Flexible schedules- day, night and evening shifts Eligibility to accrue paid vacation time Career advancement and professional development opportunities PERKS! Discounts on mortgages, vehicles, cell ph

Eupora, MS 39744 • (13 miles) • Full Time • 10/25/2026

Responsible for managing the design, planning, directing, and coordinating activities relating to the construction, modification, installation and maintenance of process equipment within value streams by performing the following duties personally or through shop floor leadership. The primary focus of this position is to improve the physical performance and capability of the products produced through metallurgical analyses, raw material selection/optimization, and furnace/heat treat enhancements. ESSENTIAL RESPONSIBILITIES Includes the following (other duties may be assigned): Establishes, verifies, and maintains standard work instructions as they relate to the operation and setup equipment. Researches world class manufacturing practices and coordinates with management, shop floor leadershi

West Point, MS 39773 • (24 miles) • Full Time • $25 to $26 / wk • 10/23/2026

NOW HIRING – Industrial Fab Shop Electrician Location: West Point, MS Pay: $23.00 - $26.00 per hour (based on experience) Schedule: Full-Time | Overtime Available We are seeking a skilled Industrial Fab Shop Electrician to support the fabrication, assembly, wiring, and testing of industrial electrical systems and control panels. This position is ideal for electricians with experience in industrial manufacturing, automation, control panel fabrication, and equipment integration. Job Responsibilities Assemble and wire industrial control panels and electrical enclosures Install and terminate power, control, and instrumentation wiring Read and interpret electrical schematics, blueprints, and wiring diagrams Install electrical components including relays, PLCs, VFDs, disconnects, and terminal bl

Shannon, MS • (44.6 miles) • Full Time • 10/23/2026

Position: Sewing Quality Control Pay: $15.00/hour Shift: Monday-Friday, 7:00 AM-2:30 PM Location: Tupelo, MS Integrity Trade Services is hiring a Sewing Quality Control to start IMMEDIATELY at $15.00/hour. Receive comprehensive benefits through ITS upon hire! Responsibilities Inspect garments and products for defects such as loose threads, missed seams, and uneven stitching Follow work orders and specifications to maintain consistent stitch quality Ensure all items are correctly measured, aligned, and assembled Perform quality checks on finished products Maintain a clean and safe work environment while meeting daily production goals Qualifications Sewing experience preferred (industrial, garment, or manufacturing) Ability to stand for long periods and perform repetitive hand motions Strong

Columbus, MS • (38.8 miles) • Full Time • $50,000 to $68,000 / yr • 10/23/2026

Industrial Maintenance Technician Job Summary We are seeking a skilled Operator/Maintenance Technician to join our team. The Operator is responsible for all daily monitoring and functions required to operate and maintain the business of supplying compressed air and hydrogen by pipeline to the designated client pursuant to in place contract requirements. The ideal candidate will be responsible for ensuring the daily operations, upkeep and repair of machinery and equipment in our facility. Industrial Maintenance Technician Duties -Run daily Operations to maintain product to client - Perform routine maintenance on machinery and equipment - Troubleshoot mechanical issues and repair as needed - Conduct electrical repairs and installations - Collaborate with the team to address maintenance needs

Starkville, MS • (15.8 miles) • Full Time • 10/21/2026

Camgian is hiring a Senior QA Software Engineer to join our team in Starkville, MS . This is a hands-on technical leadership role reporting to Camgian's Quality Assurance Director. You will lead the design, implementation, and execution of manual and automated test strategies for software, firmware, and hardware across Camgian's product lines while remaining active in code, automation, and difficult defect investigations. We are particularly interested in an engineer who built a strong foundation as a software developer and deliberately chose to focus on software quality because they value the investigative, systems-oriented work of testing. You will enter a developing QA organization and will be expected to quickly assess its people, practices, coverage, and tooling; coach team members wh

Grenada, MS 38901 • (43.7 miles) • Full Time • 10/17/2026

Description: As a Data Center Quality Inspector I, you provide superb quality control services for our clients by performing essential inspections of electrical equipment and systems, including switchgear and substations. Detailed knowledge of mechanical and instrumentation is critical to conduct inspections, interpret electrical drawings and specifications. You ensure the equipment and technicians around you comply with company and site safety requirements. Reporting daily about your findings, including time tracking and special inspection reports will be routine. You will approve and submit important documents such as Lockout/Tagout (LOTO) requests, team reports, and time tracking reports. You take pride in assuring that our clients receive safely installed and functional equipment every

Houston, MS 38851 • (25.3 miles) • Part Time • $11.99 / hr • 10/15/2026

A maintenance helper is responsible for daily cleaning by sweeping and/or blowing sawdust and debris. A helper assist the maintenance staff with routine work and preventative maintenance on equipment. A helper helps improve production efficiency by completing task during non-production hours and performs other duties as assigned by supervisor. Shift is 4:15 pm - 9:15 pm

Shannon, MS 38868 • (43.6 miles) • Full Time • 10/15/2026

Responsible for monitors and/or verifies food safety and quality of products and processes per company guidelines. The QA Tech enforces employee GMPs and safety practices as well as monitors sanitation and the condition of equipment and facility. Also, performs other tasks as necessary to safeguard the interest of the Raybern Quality Foods. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Monitor and/or verify HACCP Plan and CCP’s SQF responsibilities including but not limited to documentation, inspections, auditing, validation and verification of processes, standards, work instructions, SOP’s, specifications, policies and practices Perform quality testing on finished products to ensure compliance to standards, and specifications Monitor equipment and facility sanitation Monito

Columbus, MS 39701 • (34.4 miles) • Full Time • 10/14/2026

Industrial Maintenance Electrician (Senior) Columbus, MS. Full-time R&D Maintenance Services, Inc. – Tennessee Tombigbee Waterway R&D Maintenance Services, Inc. provides operations and maintenance services on U.S Army Corps of Engineers (USACE) projects throughout the southeast - since 1980. We are the Operations and Maintenance Contractor for the Tennessee Tombigbee Waterway Project providing machinery and facility maintenance and repair on nearly 200 miles of waterway and 10 locks/dams/spillways on the system. Position is based in Columbus, MS. R&D is an EEO Employer. General Description: Performs the full range of electrical work including inspection, troubleshooting, maintenance, and repair of complex electrical and electromechanical systems that operate river navigation, flood control

Columbus, MS 39701 • (34.4 miles) • Full Time • 10/13/2026

Description: Core Industrial Maintenance is looking for an experienced Millwright to join our talented team of skilled tradespeople. We are looking for someone that understands inspecting, repairing, and maintaining industrial machinery. This position will require the millwright to work in a variety of environments and frequent travel to customer sites. Disassemble and reassemble equipment for repair or transportation. Build the foundation for machines. Construct and install equipment such as shafting, conveyors and tram rails. Review and interpret engineering specifications, schematics, and blueprints to determine work procedures. Transfer equipment to the applicable site for maintenance to avoid contamination or safety hazards. Grind and file machinery parts. Supervise construction worke

Grenada, MS • (45 miles) • Full Time • $32.00 to $38.00 / hr • 10/9/2026

For nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand with greater speed and efficiency than our competitors. We're hiring for an Electromechanical Quality Inspector II position based in Grenada, MS . This is a first shift, as-needed po

West Point, MS 39773 • (24 miles) • Full Time • 10/12/2026

Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut team member, you can be the smiling face that greets and serves the customers, or a cook who make things happen in the kitchen. Working with us will give you the financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime. WHAT ARE WE LOOKING FOR? The good news is that your training will teach you everything you need to know to succeed on the job. But there are a few skills you should have from the get-go: You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – you

Columbus, MS • (38.8 miles) • Full Time • $25.00 to $34.00 / hr • 11/3/2026

MANUAL MACHINIST Automation Personnel Services is looking for a Manual Machinist for a company based inColumbus,MS.Inthisrole, you willhave the opportunity towork for a company thatoffers a wide range of services and resources including a full-service machine shop. Pay Rate $25.00 to $34.00 per hour Schedule and Hours Monday through Friday,730 am to400 pm. Manual Machinist Duties and Responsibilitie s Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup. Set up, adjust, and operate machine tools such as lathes and milling machines to make or rework metal parts, mechanisms, tools, or machines to exact tolerances and dimensions Using a variety of machinist hand tools and precision measuring instrument

Grenada, MS • (45 miles) • Full Time • 11/3/2026

Job Title: Assembler Job Description We are seeking a motivated and detail-oriented individual to join our team as an Assembler. This role involves assembling units according to dimensional drawings while ensuring adherence to safety requirements and quality standards. The ideal candidate will be comfortable reading and interpreting provided drawings and utilizing various tools to complete the tasks efficiently. Responsibilities Perform various tasks per group leader instruction to assemble units. Ensure compliance with dimensional drawings, safety requirements, and quality methods. Utilize tools such as pneumatic impact, pliers, and wrenches. Move around to several workstations as needed. Complete sub-assembly mating. Recognize and report errant parts. Record completed processes accuratel

West Point, MS 39773 • (24 miles) • Full Time • $90,000 to $100,000 / yr • 10/31/2026

Job Summary The Quality Engineer is responsible for driving overall product and process quality within the manufacturing plant while serving as the primary customer interface for quality related matters. This role provides hands on support to production operations, leads root cause investigations, mentors quality team members, and ensures compliance with ISO and MIL requirements. The position requires a strong technical leader who can operate effectively on the plant floor while also managing customer communications and driving measurable quality improvements. Responsibilities Primary point of contact for all customer correspondence relative to quality objectives, quality Provide daily quality support to production operations. Lead 8D investigations and drive corrective and preventive acti

Columbus, MS • (38.8 miles) • Full Time • 10/28/2026

Job Description: Looking for a Controls Engineer to join our team based out of our Columbus, MS area. Client Engineers work in a variety of environments and locations. The role requires strong technical knowledge, sound experience and people-skills, to effectively solve issues as they arise. Responsibilities: Creating and commissioning industrial controls systems, PLC software design, and HMI screens, for different industries and environments. Responsible for PLC/HMI code development, code installation, debug on job site, and commissioning of the complete system. Conducting the peripheral device programming, machine PLC programming, coordinate the machine debug, power-up, and machine validation with build and electrical teams. Ensure that systems are designed and programmed to customer and

Shannon, MS 38868 • (43.6 miles) • Full Time • 10/24/2026

SUMMARY : Operate production machinery and troubleshoot when needed. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Responsible for the set up and operation of the machine within accepted safety practices and the allotted time frame. Properly perform necessary setting adjustments. Properly perform film changes and ribbon changes including changeover from one dye to another. Ensure the products have the correct components before packing them. Continuously check the label, seals and date placement throughout the shift to ensure that every package label and date is correct. Fill out and sign all required documentation before each run. Monitor equipment operation to prevent unscheduled downtime. Communicate effectively with Production Supervisors, Production Leads and other Packa

Columbus, MS 39701 • (34.4 miles) • Full Time • 10/10/2026

Description: Coordinating daily tasks according to priorities and plans, making changes when necessary due to weather, supply, delivery and personnel Delegating individual responsibilities and projects to crew members and contractors Coordinating with business leaders for recruiting, hiring, training, managing and mentoring employees and contractors Providing adequate resources and staffing to meet project schedules, laws, regulations, best practices and safety needs Emphasizing safe use of tools, machinery and equipment while providing training on safety gear, helmets and procedures Developing and managing project budgets and quality standards for all sites Resolving conflicts or miscommunications quickly and amicably Regularly reporting project status to supervisors, site engineers and o

Houston, MS 38851 • (25.3 miles) • Full Time • $12 to $14 / yr • 10/9/2026

SPRAYS GLUE TO POLY PARTS TOGETHER ACCORDING TO INSTRUCTIONS AND SPECIFICATIONS. Hourly attendance incentive pay $1.38

Columbus, MS • (38.8 miles) • Full Time • $25.00 to $34.00 / hr • 10/31/2026

Hoist Technician Automation Personnel Services is looking for a Hoist Technician for a company based in Columbus,MS.Inthisrole, you willhave the opportunity towork with a long-lasting machine and maintenance facility. Pay Rate $25.00 to 34.00per hour Schedule and Hours Monday through Friday, 800 am to 500 pm. Hoist Technician Duties and Responsibilities •Controlling levers, pedals, and throttles to control the start, stop and speed of hoist/winch drums. •Wind and unwind cables, select loads based on weight/size specifications, and ensure heavy components are placed precisely. • Transport materials to designated locations within the facility, maintaining inventory accuracy and organization. • Inspect and maintainfuel tanks, lubricate equipment, and apply hand and foot brakes to secure hoist

Grenada, MS • (45 miles) • Full Time • 10/20/2026

Job Title: Assembly Technician Outdoor Final Assembly Job Description This role focuses on assembling large units in an outdoor, production-plant environment by following dimensional drawings, safety standards, and quality procedures. You will rotate between multiple workstations, use hand and power tools to complete casing, wiring, and sub-assembly mating, and accurately record completed processes while supporting a team-driven operation. Responsibilities Assemble units according to dimensional drawings, safety requirements, and established quality methods. Follow instructions from the group leader to perform a variety of assembly tasks across multiple workstations. Use hand and power tools such as pneumatic impact tools, pliers, and wrenches to complete assigned tasks. Perform casing and

Columbus, MS 39701 • (34.4 miles) • Full Time • 11/2/2026

Description: Core Industrial Maintenance is looking for an experienced Industrial Maintenance Technician to join our talented team of skilled tradespeople. We are looking for someone that understands multiple different types of welding techniques and proper applications of those skills in an industrial setting. This position will require the Technician to work in a variety of environments, in a variety of functions, and frequently travel to customer sites. General Responsibilities could include: Disassemble and reassemble equipment for repair or transportation. Construct and install equipment such as shafting, conveyors and tram rails. Review and interpret engineering specifications, schematics, and blueprints to determine work procedures. Determine which machines, techniques, and tools to

Shannon, MS 38868 • (43.6 miles) • Full Time • 10/25/2026

Sandwich Production Worker POSITION SPECIFICS Reports To: Sandwich Production Worker FLSA Status: Hourly ROLE SUMMARY This is an entry level position. A Sandwich Production Worker will be expected to work in any number of different positions such as the bread assembly line; sandwich assembly line, and as a kitchen helper. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Making sandwiches Wrapping and labeling sandwiches Packaging sandwiches Making boxes, carton machine loader, palletizer Able to work in a repetitive, high speed, and low temperature work environment Able to maintain production rates Understands and complies too all company GMP Food Safety Policies and Procedures particularly those related to working in the different production areas Understands and maintains exp