Lincolnton, NC 28092 • (18.4 miles) • Full Time • 11/1/2026

Major Responsibilities: Demonstrates knowledge in various modes and methods of oxygen delivery and the equipment needed for each and can conduct prescribed therapeutic procedures to achieve adequate oxygenation. Administers therapeutic procedures, understanding the purpose and benefits, and possible effects associated with each. Performs diagnostic procedures as outlined in policy. Initiates, monitors and maintains mechanical ventilators and non-invasive ventilators and is aware of the critical care duties and effects of such therapy. Independently evaluates current therapies using appropriate judgment and protocols, making proper recommendations concerning plans of care and patient education needs. Documents therapy and results as required by hospital, department and regulatory agencies.

Elkin, NC 28621 • (42.7 miles) • Full Time • 11/1/2026

POSITION HIGHLIGHTS: Location: Hugh Chatham Memorial Hospital Essential Functions Demonstrates knowledge in various modes and methods of oxygen delivery and the equipment needed for each and can conduct prescribed therapeutic procedures to achieve adequate oxygenation. Administers therapeutic procedures, understanding the purpose and benefits, and possible effects associated with each. Performs diagnostic procedures as outlined in policy. Initiates, monitors and maintains mechanical ventilators and non-invasive ventilators and is aware of the critical care duties and effects of such therapy. Independently evaluates current therapies using appropriate judgment and protocols, making proper recommendations concerning plans of care and patient education needs. Documents therapy and results as

Mooresville, NC 28117 • (20.9 miles) • Full Time • 11/1/2026

Do your Best Work in Mooresville This position is based at our headquarters in Mooresville, North Carolina. Our corporate office is a space where you can collaborate and do your best work. Take a walk, grab a bite (or a cup of coffee), work out or get a check-up – we invest in you so you can find your inspiration. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at any time. What You Will Do The Principal Industrial Engineer is responsible for identifying, analyzing, securing resources and support, and developing solutions that will facilitate continuous productivity, capacity, safety, and quality improvement within Lowe's Supply Chain and Distribution teams. Within distribution, the Principal Industr

Charlotte, NC 28202 • (40.9 miles) • Full Time • $30.21 / hr • 10/18/2026

Cargill is a family company committed to providing food and agricultural solutions to nourish the world in a safe, responsible, and sustainable way. We sit at the heart of the supply chain, partnering with producers and customers to source, make and deliver products that are vital for living. By providing customers with life’s essentials, we enable businesses to grow, communities to prosper, and consumers to live well. This position is in our Food Enterprise where we are committed to serving food manufacturers, food service customers, and retailers with a complete range of innovative ingredients and branded products. Our portfolio includes poultry, beef, egg, alternative protein, salt, oils, starches, sweeteners, cocoa and chocolate. Job Type: Full Time Shift Available: 12 hours shif

Charlotte, NC 28245 • (41 miles) • Full Time • 10/27/2026

Req ID: 395526 NTT DATA strives to hire exceptional, innovative and passionate individuals who want to grow with us. If you want to be part of an inclusive, adaptable, and forward-thinking organization, apply now. We are currently seeking a Senior Ontologist (Lending Domain / Snowflake / AWS) to join our team in Charlotte , North Carolina (US-NC) , United States (US) . Day-to-Day Job Duties: (What this person will do on a daily/weekly basis) Design, develop, and maintain business ontologies and semantic models for US lending products, processes, and enterprise data assets. Define business concepts, entities, relationships, taxonomies, and metadata standards across commercial, wholesale, consumer, mortgage, and credit lending. Model the end-to-end lending lifecycle, including loan originati

Gastonia, NC 28052 • (33.9 miles) • Full Time • $100,000 to $120,000 / yr • 10/27/2026

Join our team as the Lead Product Engineer and take full ownership of fluid filtration system product development. Reporting directly to the R&D Business Unit Manager, you will lead complex mechanical designs from concept through production release and set the engineering direction that drives product performance, manufacturability, and cost targets across multiple market segments. This role is ideal for a hands-on mechanical engineer with direct experience designing and developing fluid-handling or filtration system products who wants meaningful product ownership in a growing industrial R&D environment. You'll have the opportunity to help shape a newly established business unit, work across multiple industries, and make a direct impact on product innovation and manufacturing performance.

Charlotte, NC 28262 • (39.1 miles) • Full Time • 11/1/2026

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! We’re seeking a Lead Substation Physical Engineer to take a key role in delivering high impact substation physical design projects. You’ll work on utility systems ranging from 12 kV to 500 kV, contributing to major grid modernization efforts and supporting how renewable generation connects to the grid. In this role, you’ll apply your expertise in digital logic design

Charlotte, NC 28245 • (41 miles) • Full Time • 10/18/2026

Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. For more than 140 years, Johnson Controls has delivered performance where it really matters. Backed by advanced technology, lifecycle services and an industry-leading field organization, we elevate customer performance, turn goals into real-world results and help move society forward. What you will do Perform service and repairs on Portable Fire Extinguishers, Kitchen Hood Systems & Suppression Gas Systems in

Charlotte, NC 28245 • (41 miles) • Full Time • 10/21/2026

Project Manager, NCDOT Heavy Civil Charlotte, NC (Onsite, projects across central NC) Run NCDOT roadway, bridge, and utility jobs start to finish for a self-perform contractor with backlog already won and a direct line to senior leadership. Must-Haves 5+ years as Project Manager of record on heavy civil, highway, bridge, or utility work Documented NCDOT project experience as the PM You've already run projects in their entirety (not a step up for APMs or Project Engineers) Contractor-side background, not consultant, design, or inspection only Strong on cost control, schedules, change orders, and field teams What You'll Do Own budget, schedule, forecasting, and margin from preconstruction through closeout Lead superintendents, field engineers, and subcontractors Serve as main contact for NCD

Charlotte, NC 28204 • (42.2 miles) • Full Time • 11/3/2026

BGE, Inc. is a nationwide consulting firm that provides services in civil engineering, planning, landscape architecture, construction management, survey, and environmental services for public and private clients. Our employees enjoy a comprehensive benefits package such as outstanding health care, generous 401(k) match, career mapping and highly competitive time away from work programs to include remote work options, dependent care, and flexible Fridays. Job Description Work on engineering and design elements on multiple projects for private or public clients (depending on the position) Act as an engineering lead to more junior-level engineers and technicians Partner with senior staff in maintaining and developing client relationships Job Requirements Bachelor's degree in civil engineering

Charlotte, NC • (42.5 miles) • Full Time • $100,000 to $160,000 / yr • 11/3/2026

As a Data & AI Engineer, you’ll build and deploy modern data pipelines and generative AI solutions on AWS from scalable ETL/ELT workflows and cloud data platforms to production-grade RAG systems and AI agents. One engagement you may be designing and optimizing data pipelines using Glue, Lambda, and Redshift, the next you’re building GenAI applications powered by Bedrock, Claude, and vector databases to enable intelligent search and automation. You’ll work directly with clients to deliver end-to-end data and AI solutions that are secure, scalable, and production-ready. What You’ll Do: Implementing data pipelines using AWS services such as Glue, Lambda, Step Functions, and EMR Creating and maintaining data extraction, transformation, and loading processes Configuring and optimizing AWS datab

Charlotte, NC 28201 • (43.5 miles) • Full Time • 11/3/2026

Charlotte, North Carolina Industrial Pro Recruiting is conducting a confidential search for an experienced Civil Engineering Project Manager to join an established and growing engineering and design organization in the Charlotte market. This opportunity is designed for a licensed Professional Engineer with significant land development and site civil experience who can independently manage projects, develop strong client relationships, and lead multidisciplinary teams from initial concept through permitting and construction. The Project Manager will have responsibility for project execution, technical quality, client communication, schedules, budgets, permitting coordination, and the overall success of assigned projects. RESPONSIBILITIES Manage civil/site development projects from proposal

Charlotte, NC 28273 • (44.9 miles) • Full Time • 11/3/2026

Essential Job Functions & Responsibilities: Conduct field investigations and analyze failures involving all types of civil-site built environments and infrastructure for large scale land developments, master planned communities, mixed used projects, commercial and industrial projects, roadway and utility, and streetscape enhancements Evaluate design/construction -related deficiencies associated with grading and drainage, stormwater management and conveyance, underground utility systems and installation, erosion control, concrete flatwork, asphalt pavements, and hardscape systems May investigate matters involving: design of site-visibility at intersections, vehicular use areas, parking lots, pedestrian and vehicular ingress/egress ways the applicability of MUTCD and ADA standards preparatio

Hickory, NC 28602 • (10.8 miles) • Full Time • $18.00 to $22.68 / hr • 11/3/2026

RNR Tire Express is ready to hire a full-time Field Collector with great customer service skills. An average field collection makes $18.00 to $20.68 with the bonuses . In addition to great pay and our family atmosphere , our office team also enjoys the following benefits and perks: Medical, dental, and vision insurance Long- and short-term disability Accident, critical illness, and cancer plans 401(k) matching plan Paid holidays Growth potential So, now that you've learned the who, what, where, and why, you may be wondering HOW ? It's easy! Just fill out our initial short, mobile-friendly online application . We hope to meet you soon! THE DAY-TO-DAY You can be found in the office Monday-Friday, 8:30am-6:30pm and Saturday 8:30am-3:30pm with one weekday off each week and Sundays off . Each d

Statesville, NC 28677 • (16.1 miles) • Full Time • 11/3/2026

Mack is looking for talent! Do you like a fast paced environment with upward mobility? Are you looking to work with key industry players in a world-class facility utilizing multiple processing technologies? If the answer is yes, Mack would like to speak with you about joining our Statesville, NC, team as a Tooling Engineer. As the manufacturing arm for our customers, Mack has built a worldwide reputation forplastic injection molding, machining, design work, sheet metal fabrication and contract manufacturing. The Mack team helps launch new products for some of the top fortune 500 companies, as well as cutting-edge technologies for start-up organizations. The Company’s engineers are the minds behind our success, and as a Tooling Engineer you will assuring Mack achieves its mission of achievi

Statesville, NC 28677 • (16.1 miles) • Full Time • 11/3/2026

Description: Iredell Health System has an opportunity for a Director of Facilities Management. The Director provides a key role for our organizations growing footprint within Iredell County. The Director of Engineering leads the daily operation, maintenance, reliability, safety, and regulatory readiness of the organization’s facilities, utilities, equipment, and building systems (i.e., HVAC, electrical, mechanical, plumbing, etc). This role is directly responsible for planning, staffing, budgeting, preventive maintenance, project coordination, vendor management, and compliance activities to ensure the physical environment supports safe, efficient, and uninterrupted operations (utility and life safety management). Reports to the President and Chief Executive Officer. Provides direction and

Dallas, NC 28034 • (26.8 miles) • Full Time • 11/3/2026

Join Envalior as a PCT Specialist (Process Control Technician Specialist) As a PCT Specialist at Envalior, you will play a key role in monitoring and optimizing our production processes to ensure the highest product quality and operational efficiency. You will work closely with the production, engineering, and quality teams to implement process controls and troubleshoot any process deviations. Responsibilities include: Developing and maintaining process control procedures and documentation. Monitoring production data and analyzing trends to identify opportunities for process improvement. Collaborating with cross-functional teams to implement corrective actions and optimize process parameters. Providing training and technical support to production operators on process controls. Ensuring com

Charlotte, NC 28216 • (34.7 miles) • Full Time • $75 to $100,000 / yr • 11/3/2026

We are looking for a Cabinet Vision Programmer. Candidate must be proficient in design. Looking for at least 5 years' experience. Millwork/Commercial experience. Custom side of Cabinet Vision. Office is located in Gastonia NC AlphaCam Router - Advanced + Automation Manager Plus for MDF Doors

Gastonia, NC 28052 • (35.6 miles) • Full Time • 11/3/2026

*This role is located in person, in Gastonia, North Carolina. The Systems Engineer is responsible for working with clients on a day-to-day basis in a consulting and technical role. The successful candidate will take pride in making a difference in each of our customer's businesses. One of the primary responsibilities is to maintain a high utilization with the ability to transition quickly between tasks. The successful candidate will encounter multiple different IT environments and will need to be able to adapt quickly to meet the needs of the client. Candidate should be able to maintain, monitor, deploy, document, and support each IT environment where multiple workstations and servers may exist. Candidate will encounter issues related to hardware, software, and networking. Qualifications:

Charlotte, NC 28262 • (38.8 miles) • Full Time • 11/3/2026

Job Summary: To implement the processes by which projects are started up, sequenced, commissioned, turned over, and warrantied. To train customer facilities personnel in the proper operation and maintenance of installed systems and equipment and provide response and support for warranty requests. Responsibilities: LEADERSHIP Ability to lead crew in the direction most productive for the timely completion of the job while following the project commissioning process. Motivate the crew to the highest level. DOCUMENTATION Completes startup forms for equipment as required. Works with factory startup technicians and obtains forms as required. Keeps file in a concise, orderly manner. Documents all job-related occurrences. Keeps a daily record. Uses Autodesk Build for QC/QA processes. Qualification

Charlotte, NC 28206 • (39.9 miles) • Part Time • 11/3/2026

Bolton & Menk is now accepting applications for our 2027 summer internship season. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. As a Civil Engineering Intern , you'll gain real-world experience supporting municipal infrastructure projects while working alongside engineers, project managers, and construction professionals. You'll spend much of your summer in the field assisting with construction phase activities for transportation projects while also building technical and professional skills that will prepare you for a successful engineerin

Charlotte, NC 28206 • (39.9 miles) • Full Time • 11/3/2026

WB Moore is a privately owned electrical leader based in Charlotte, NC, known for dynamic, multistate ELECTRICAL PROJECTS driven by advanced technology and innovative design. We deliver effective solutionsto our customerswhile investing in our people’s growth. WB Moore partners with WBM Group, PLLC to provide those design services in MEP engineering and consulting throughout various industry sectors.The targeted position is focused on supporting WBM Group, PLLC operations, and the engineering projects acquired. The WB Moore Company seeks an experienced Electrical Designer to support operations in the Charlotte, NC market. Description: The electrical designer reports to a senior electrical designer or engineer and is responsible for electrical design and the developing and maintaining of co

Boone, NC 28607 • (40.9 miles) • Full Time • $1,200 / wk • 11/3/2026

Job Description: Travel throughout the USA using the latest technologies and industry methods to provide large transportation agencies with highway asset management systems, surveys and data that optimize maintenance and development and ensure the safety of all stakeholders. Our advanced pavement data-collection vehicles are equipped with precision survey systems and software and can perform any roadway data collection task. The modular design allows the vehicles to be easily reconfigured to meet your requirements and serves to cut excess, equipping the vehicles with the necessary surveying systems. As the vehicle ages, the subsystems can be integrated onto another chassis, and our customizable software can be updated to suit changing needs, making them an invaluable long-term investment.

Charlotte, NC 28203 • (41.7 miles) • Full Time • 11/3/2026

Company Mission Statement: To build up our communities, our clients, and each other by building trust in everything we do. Learn more about Harper: https://vimeo.com/242609377 Summary/Objective: Promotes the company mission statement by joining the Project Manager and Superintendent as a team who work together to create a safe work environment, build a quality project, keep projects on schedule while earning a fair and reasonable profit. Essential Functions: Understand, support, and adhere to Harper safety and quality requirements. Observe and correct violations as they arise on project sites. Purchase materials and equipment with safety and quality in mind. Assist Project Manager with daily project duties. Expedite material procurement, approval, and delivery as necessary to promote accur

Charlotte, NC • (42.5 miles) • Full Time • $55.00 to $58.00 / hr • 11/3/2026

Title: System Admin/Engineer Location: Charlotte, NC (Onsite) Duration: 12 Months Responsible for matching current technology with the current needs. As part of this task, engages in the evaluation and installation of software, hardware, and other types of support equipment into a workable network that supports a variety of functions.This person has fundamental knowledge of Systems Engineering infrastructure. Includes individuals performing high-level systems support. Responsibilities include providing problem determination and resolution, install and update newly developed software to assigned systems. Responsible for the operating system and associated subsystems including system and application patching and security configuration. Provide system-level support of multi-user operating sys

Charlotte, NC 28273 • (44.9 miles) • Full Time • 11/3/2026

* Do you like to work in the field? Interact with customers? *Can lift 55 pounds? *Enjoys work that requires physical labor and intelligence? *Do you have industry experience in water, fire, mold restoration or construction? *Want to work for a top company that delivers quality and customer happiness? We have a full suite of benefits, healthcare, retirement savings plan, 401K plan with a company match, as well as life insurance, dental insurance employee assistance program and more. If you are interviewed, we will pay you $100 for your travel costs and time. Prior to the interview, we will send a full job description. Powered by JazzHR hEQ1pdMOCn

Cherryville, NC 28021 • (26.1 miles) • Full Time • $80,000 to $90,000 / yr • 11/3/2026

Welding Engineer – Robotic Welding Fixture Design Farris Fab Machine, Inc. is seeking an experienced Weld / Industrial Engineer with a strong background in metal fabrication, welding processes, and robotic welding. This position will work closely with our engineering and production teams to develop efficient welding processes, design weld fixtures, and support both manual and robotic welding operations. The ideal candidate combines hands-on welding knowledge with strong engineering and SolidWorks skills and understands how to take a fabricated product from print through an efficient, repeatable production process. Key Responsibilities Design and develop weld fixtures and tooling for manual and robotic welding applications Create fixture designs and manufacturing drawings using SolidWorks D

Bessemer City, NC 28016 • (29.5 miles) • Full Time • 11/3/2026

We are representing a multi-disciplinary, Civil/Architectural/Environmental/Surveying/Field Services Construction Engineering firm that is looking for a Project Engineer, Water Resources in the Greater Charlotte region. Job Requirements: BS degree in in Civil Engineering. Minimum 4 years of experience in civil water design/water and wastewater design. Proficiency with AutoCAD and Civil3D. Lead evaluation and support of utility assets and develop recommendations for rehabilitation or replacement. Ability to assist with environmental studies, permitting, adherence of plans and specifications, alternative analyses, and other technical deliverables. Up to 10% travel.

Charlotte, NC 28201 • (43.5 miles) • Full Time • 11/3/2026

BLEW & Associates is seeking an experienced Professional Engineer to lead the growth of our civil engineering and land development practice in an assigned market. This position offers the opportunity to build a local practice with the support of a national firm providing engineering, land surveying, environmental assessment, zoning, and construction services. The Market Leader will develop client relationships, secure profitable work, guide project delivery, and build a strong engineering team. Requirements Responsibilities Develop and execute a market growth plan focused on clients and project types that fit BLEW’s capabilities. Generate new engineering opportunities through established relationships, direct outreach, industry involvement, and collaboration with BLEW’s business developmen

Wilmington, NC 28658 • (7.4 miles) • Full Time • $45.00 / hr • 11/3/2026

Role: Mechanical Engineer II Location : 100% onsite in Trivium, Newton, NC. Pay Rate $43/hr on W2 Duration: 12 +Months 8am - 5pm, M-F LEVEL EXPECTATION Mechanical Engineer II independently leads complex engineering work, provides technical direction, and delivers measurable manufacturing and capital-project outcomes. Position Summary Mechanical Engineer II serves as a senior individual contributor in a team environment responsible for leading complex mechanical engineering efforts that support optical fiber manufacturing qualification, validation, process improvement, equipment reliability, and capacity expansion. The role owns technical scope from concept through commissioning and sustained operation; develops safe, robust, and cost-effective solutions; and partners with operations, maint

Mooresville, NC 28115 • (26.8 miles) • Full Time • 11/3/2026

Job Description Porsche Penske Motorsport is seeking a qualified Systems Engineer to join our IMSA racing program. This position will be a key member of the traveling race team, responsible for supporting the electronic, data, control, and communication systems of the race cars. The Systems Engineer will work closely with race engineering, IT, and other technical personnel to ensure vehicle systems are properly configured, maintained, and supported both at the shop and at test and race events. This position is based in Mooresville, North Carolina and requires extensive travel throughout the IMSA season, including periods of up to 2–3 weeks away from the home base. Responsibilities Responsible for the development, setup, systems integration, maintenance, wiring, and functionality of all dat

Kings Mountain, NC 28086 • (35.5 miles) • Full Time • 11/3/2026

Summary Researches, develops, designs, and tests electrical components, equipment, and. Adhere to all standards, codes regulations. Provide engineering support both internally and externally. Essential Duties and Responsibilities Create electrical schematics for production to use in unit assembly, create and test programs for PLCs, HMIs and VFDs, create part numbers for new components, options and units, create manuals for customers containing information on units, create work instructions for use by production and staff. Evaluate and test new components for possible use in production. Coordinate with customers to create new interfaces for machine integration. Use customer electrical schematics to design interfaces / determine interface compatibility. Coordinate with sales department to en

Charlotte, NC 28208 • (39 miles) • Full Time • $26.00 to $35.00 / hr • 11/3/2026

Who Is Tri-Lift Industries? Tri-Lift Industries, Inc. is a third generation family business seeking qualified individuals to be part of our growing team. As the leader in material handling equipment and solutions, we represent CLARK, BYD, and Liugong forklifts as well as aerial equipment and solutions, covering North Carolina, South Carolina and Virginia. Our vision and mission is to be THE trusted long-term material handlings partner in the market by delivering proven industry leading products and services designed to enhance our customers business. We stand by our core values that provide passion, professionalism, integrity and team work. We are a large company still small enough to care. Tri-Lift Industries provides opportunities and offers continuous paid training, wages that are flexi

Concord, NC • (40.1 miles) • Full Time • 11/3/2026

Company Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programs as we turn challenge into opportunity and complexity into success. Our capabilities include program, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority inte

Charlotte, NC • (42.5 miles) • Full Time • 11/3/2026

Tube Laser Operator Pay: Up to $28.00/Hour to Start Based on Experience Position Summary We are seeking a detail-oriented Tube Laser Operator to join our manufacturing team. This role is ideal for experienced machine operators who understand production processes, blueprint reading, quality inspection, and precision measurements. Direct tube laser experience is not required. Candidates with experience operating CNC machines, saws, fabrication equipment, or other industrial machinery are encouraged to apply. The ideal candidate has strong mechanical aptitude, experience working with calipers and micrometers, and a commitment to producing high-quality work in a safe manufacturing environment. Responsibilities Set up and operate tube laser cutting equipment and other production machinery. Read

Charlotte, NC • (42.5 miles) • Full Time • $100,000 to $130,000 / yr • 11/3/2026

Applicants must currently live in the United States and be legally authorized to work in the U.S. without sponsorship. We do not sponsor visas. Location: This is a full-time, direct-hire, on-site position in Glendale, AZ. Relocation assistance is offered, so candidates anywhere in the U.S. who are willing to relocate to the Phoenix/Glendale area are encouraged to apply. About the role: You will work on-site in the plant on high-speed beverage filling and packaging lines, programming and troubleshooting Allen-Bradley PLCs on running production equipment. This is a plant-floor controls engineering role, not a software, QA, or test-automation role. PLC Controls Engineer – Day Shift Schedule: 2-2-3 rotation, 6:00 AM–6:00 PM (Day shift, 12-hour shifts) Base Salary: $100,000–$130,000 Annual Bonu

Harrisburg, NC 28075 • (44.1 miles) • Full Time • 11/3/2026

Description: As a Sr. Structural Engineer, you will have the opportunity to work on a wide variety of engineering projects and design elements. This individual will have the avenue to gain knowledge, experience, and grow their career. Candidate should be self-motivated and willing to be challenged in engaging and meaningful work. The right candidate is a degreed engineer with a structural engineering emphasis. Design experience in industrial and/or bridge projects is a plus. Duties will include preparation of design drawings, specifications, and reports, as well as generating studies and cost estimates. Successful candidates should have knowledge in designing structures using applicable codes (IBC, ASCE-7, AASHTO), and well as material design codes (AISC, ACI concrete, ACI masonry, etc.).

Gastonia, NC 28052 • (35.6 miles) • Full Time • 11/2/2026

Looking to build your career with a company that values innovation , stability , and people ? Join our dedicated team as a Field Service Technician for our Gastonia, NC market. If you possess: Excellent customer service skills, superior organizational skills, and a self-starter mentality High level of technical ability Previous technical service and/or automotive service background preferred Since 1946, Hunter Engineering has been aligning cutting-edge technology with a strong commitment to quality. As a family-owned , American-made company, Hunter is the global leader in automotive service equipment, with our products used in over 130 countries by top vehicle manufacturers, tire companies, and service centers. We’re proud to have been recognized as a Best Places to Work finalist by the St

Charlotte, NC 28208 • (39 miles) • Full Time • 11/2/2026

Description: Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! We are seeking motivated and dependable Engineering Technician Aides to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materialsincluding soil, concrete, and masonryin accordance with ASTM standards. Technicians are responsible for observing construction activities for complianc

Charlotte, NC • (42.5 miles) • Full Time • 11/2/2026

Geo-Technology Associates, Inc. (GTA) is seeking a Senior Engineering Technician for work in Charlotte, North Carolina. Candidates should possess 2-5 years of relevant testing experience and have one (preferably more) of the certifications listed below. NICET Level I, II, III or IV (Geotechnical Engineering Technology Construction) NICET Level I,II, III, or IV (Soils Certificate in Construction Materials Testing) AWS or CWI American Society of Non-Destructive Testing (ASNT) Level II or III ICC Certifications (Soils, Masonry, Fireproofing,Welding, Bolting, Reinforced Concrete, etc.) ACI Certified Construction Special Inspector (CCS), ACI CCS, ACI Concrete Field Testing Technician Grade I, ACI/CRSI Certificate for Adhesive Anchor Installation Senior Engineering TechnicianResponsibilities Inc

Mooresville, NC 28117 • (20.9 miles) • Full Time • 11/2/2026

Corvid Technologies has multiple opportunities for students pursuing undergraduate and graduate Aerospace Engineering degrees to work with our team to analyze, develop, design, manufacture and test next-generation products for Government and Commercial customers. Aerospace Engineers (and similar STEM degree seeking) students can work within many areas across Corvid, with sample tasking ranging from developing and analyzing aerothermal properties for hypersonic systems to building guided missiles used to test missile defense systems. Our teams also support CFD and Multiphysics analysis for aerospace systems, including analyzing and predicting flight performance and safety boundaries for test events. At Corvid, our engineers work on challenging, technical tasks, and our interns work alongsid