Clayton, NC 27520 • (37.9 miles) • Full Time • $21.74 / hr • 10/27/2026

Job Title: Manufacturing Technician Job Description The Manufacturing Technician sets up, operates, monitors, and controls manufacturing equipment, systems, and processes in a regulated environment. This role supports filling and packaging operations, ensures rooms and equipment are properly cleaned and sanitized according to standard operating procedures (SOPs), and executes the production schedule to meet established production goals while maintaining high quality and safety standards. Responsibilities Set up, operate, monitor, and control manufacturing equipment, systems, and processes in support of filling and packaging operations. Clean and sanitize manufacturing, filling, and packaging rooms and equipment in accordance with SOPs and applicable guidelines. Execute the production sched

Angier, NC • (41.8 miles) • Full Time • 10/22/2026

Job Title: Control Panel Building Technician Job Description The Technician builds and tests electrical control panels and monitoring systems by following detailed engineering drawings and schematics. This role combines electrical and mechanical assembly, including wiring, mounting components, conduit and tubing installation, and low-voltage DC testing. The technician uses a variety of hand and power tools, reads and interprets technical documentation, and collaborates with internal teams and vendors to ensure accurate, high-quality production in a safe and organized environment. Responsibilities Assemble electrical control panels and monitoring systems in accordance with engineering drawings, schematics, and written instructions. Wire, label, and terminate conductors to terminal blocks an

Kinston, NC • (34.6 miles) • Full Time • $35.00 to $37.00 / hr • 10/17/2026

TIER 1: 2-4 years of experience Drill, Seal, Insert fasteners, Varnish, Paint, Counter sink, Sealer, Assembler, Sub Assembly, Assembler/Installer Structures Skills: •Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations •Must have basic skills of using a variety of tools Communication Skills: Required •Good verbal and written communication skills in English. •Ability to articulate complex issues to others. •Ability to maintain confidentiality in all matters is essential. •Demonstrated effectiveness in interpersonal skills. Preferred Technical Systems Proficiency: •Able to enter, generate and retrieve information using a computer (SAP and Excel knowledge required) Required •2 years’ minimum experience in aviation production or equivalent •Previo

Kinston, NC 28504 • (31.4 miles) • Full Time • $35.00 / hr • 10/6/2026

Key Responsibilities Perform repetitive and non-repetitive assembly operations on modules, boards, panels, frames, cables, and other assemblies or subassemblies Read and interpret blueprints, diagrams, drawings, specifications, changes, and work orders Set up and perform manual and automated assembly operations and portable machine functions Use hand and power tools, jigs, saws, drilling machines, fasteners, torquing tools, and precision measuring instruments Perform drilling, sealing, fastener installation, varnishing, painting, countersinking, and related structural assembly activities Conduct continuity checks and quality inspections on work in process and completed assemblies Disassemble, modify, rework, reassemble, and test assemblies according to specifications Perform fabrication, f

Smithfield, NC 27577 • (27.4 miles) • Full Time • $17.00 to $20.00 / hr • 10/17/2026

Leading custom plastics molder is looking to add to our family. EnviCor Rotomolding LLC, located in Smithfield, NC, is a molder of recreational goods, water/chemical tanks, industrial products and other exciting finished goods for our industry leading customers. Operators are integral members of our team, responsible for safely molding quality products in an efficient manner. Our customers’ success is dependent upon us. That success is not possible without quality front line team members. What you will do: · Read, understand and follow safety and operational instructions · Maintain work area in a clean and safe manner · Perform/Assist with machine operations · Perform/Assist with mold changes · Load powder, remove molded part from mold · Keep pace with machine cycle times · Perform seconda

La Grange, NC 28551 • (26.3 miles) • Full Time • $20.00 / hr • 10/17/2026

Join our team and help power the future! We’re looking for a skilled and safety-focused Auxiliary Operator (AO) to keep our power plant running smoothly and efficiently. In this role, you’ll operate and maintain boilers, turbines, dryers, fans, pumps, motors, chemical systems, and other essential plant equipment. You’ll be part of a close-knit team that values safety, reliability, and technical excellence. What You’ll Do Monitor, operate, and maintain plant and auxiliary equipment to ensure safe and reliable performance. Perform routine boiler chemistry sampling and make operational adjustments as directed. Handle chemicals and fuel safely, including receiving deliveries and material handling. Operate and maintain chemical pumping systems, water treatment systems, and fuel/dryer operations

Garner, NC 27529 • (43.2 miles) • Full Time • 10/29/2026

Are you looking for a rewarding career in the securitydetention systems industry? We are seeking motivated and dependable Service Technician to join our growing team. If you enjoy hands-on work, problem-solving, and working with advanced security and Detention Locking Systems, we want to hear from you! Position Summary Service Technicians are responsible for troubleshooting, repairing, servicing, and installing security, and detention equipment while meeting project schedules, budget requirements, safety standards, and customer expectations. Service Technician Independently perform installation, troubleshooting, and service work Apply technical knowledge to support daily operations and customer needs Key Responsibilities Troubleshoot, repair, and install security electronics and networking

Kenly, NC 27542 • (34.5 miles) • Full Time • $15 to $18 / yr • 10/27/2026

About the Role: We are seeking a skilled Rebar Fabricator to join our team. As a Rebar Fabricator, you will be responsible for producing high-quality rebar products that meet our clients' specifications. You will work closely with our engineering and production teams to ensure that all products are fabricated to the highest standards. Your attention to detail and ability to work in a fast-paced environment will be essential to your success in this role. This is a full-time position with opportunities for growth within the company. Minimum Qualifications: High school diploma or equivalent At least 2 years of experience in rebar fabrication or a related field Ability to read and interpret engineering drawings and blueprints Experience operating machinery and equipment used in rebar fabricati

Clayton, NC • (40.4 miles) • Full Time • 10/26/2026

Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Automation Tech II for our client in the Biotech domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 3+ Months Contract Location: Clayton, NC Salary: Best in the Market Role: Automation Tech II Primary Skills: Administration Role Description: The Automation Tech II must have 2-3+ years of experience. In this role, you will be required to work in a warehouse area, refrigerated areas, and in freezers with temperatures of -30c or colder. This job requires you to continually handle an

Garner, NC 27529 • (43.2 miles) • Full Time • 10/26/2026

We are hiring immediately for full time SERVICE TECHNICIAN positions. Location : Canteen - 3300 Waterfield Drive, Garner, NC 27529. Note: online applications accepted only. Schedule : Full time schedule. Monday through Friday; hours may vary. On call as needed. Further details upon interview. Requirement : Previous experience preferred. Perks: Willing to train! Pay Range: $20.00per hour to$22.00per hour. *Internal Employee Referral Bonus Available The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg About Canteen: Canteen brings break time to everyone. We combine food, service, and

Lillington, NC 27546 • (43.1 miles) • Full Time • 10/24/2026

Do you want to work for a company where you matter? Where you have a voice? Where you are growing? Are you looking to make a career as a professional Auto Service Technician? Why Choose Hiester Automotive: Flat Rate with Production Bonuses Privately owned auto group with great career growth potential Paid medical Paid time off/vacation and flex days ASE Tuition Certification Reimbursement Company-Paid Manufacturer/Specialty Training Successful team approach with input from employees What our technicians do: Examine customer vehicles. Identify necessary vehicle repairs and maintenance. Maintain CSI at or above company standards. Estimate cost of repairs. Perform vehicle repairs and maintenance. Document services performed. Perform services efficiently and according to dealership guidelines.

Burgaw, NC 28425 • (41.7 miles) • Full Time • 10/23/2026

Woodworker - 1st Shift Hood Container is seeking a qualified woodworker to join our team.Woodworkers make products from lumber and synthetic wood materials. Modern woodworking is highly technical. Skilled operators use automated machinery to ensure accuracy in all phases of their work. Woodworkers do many of their tasks on an assembly line, but some customized work must be done by hand. Woodworkers set up, operate, and tend all types of woodworking machines, such as saws, milling machines, drill presses, sanders, and wood-fastening machines. Operators use equipment to cut and shape wooden parts and to verify dimensions, using a template, caliper, and rule. Woodworkers add fasteners and adhesives and connect the parts to form an assembled unit. Finally, workers sand, stain, and, if necessar

Kinston, NC • (34.6 miles) • Full Time • $72,800 to $93,600 / yr • 10/20/2026

Senior Electrical Automation Technician Company: Confidential - food manufacturer Location: Kinston, NC Compensation: $35 - $45 per hour Employment Type: Full-time, hourly Schedule: 12-hour rotating schedule; night shift openings About the Company Our client is a food manufacturer operating a production facility in Kinston, North Carolina, with an active automation team. The Role The Senior Electrical Automation Technician is at the forefront of enhancing and maintaining the facility's electrical control systems, driving automation solutions from initial setup and programming through ongoing maintenance and troubleshooting. You will work with the automation team to shape the plant's long-term technology roadmap and keep the automation infrastructure secure, backed up and up to date. What Y

Goldsboro, NC 27530 • (18.1 miles) • Full Time • $50,000 to $80,000 / yr • 10/15/2026

We are a John Deere dealer with 35 locations serving a diverse group of agricultural, commercial, and residential customers in North Carolina, South Carolina, and Virginia. At Quality Equipment, we pride ourselves on our commitment to our customers, our employees, and our community. Our employees and management stay close to our customers and strive to serve them quickly and in ways that make sense in each local area. Our work culture is ethical, entrepreneurial, and hard working. We work with excellent people every day – our customers and our co-workers. Our work is challenging and offers a great deal of variety in the tasks we do. At Quality Equipment, we strive to be the premier John Deere dealer in our region by serving our customers with commitment and integrity. We offer the opportun

Lillington, NC 27546 • (43.1 miles) • Full Time • 10/15/2026

Why Choose Boon Edam? Are you looking for a challenging career in a technology-driven industry? Boon Edam may be the entry to your future! Boon Edam is a global market leader in entry solutions with offices across the world. Although we currently employ over 1400 people worldwide, we remain a family company at heart. We are proud that a large number of our people have been with us for over a decade. They have joined us at the start of their career and have developed themselves with us through our internal training and career development programs. We are characterized by our drive and dedication; drive to create the most premium entry solutions and dedication towards the company, our colleagues, and our customers. We take that extra step to make sure our clients are fully satisfied with our

Clayton, NC 27520 • (37.9 miles) • Full Time • 10/13/2026

MM is a global leader in consumer packaging. The Group provides packaging solutions for carton board and folding cartons with an attractive offer in kraft papers, uncoated fine papers, leaflets, and labels. MM promotes sustainable development through innovative, recyclable packaging and paper products. Our heart beats for talents – be one of them! To strengthen our Client Services Team in Clayton, we are looking for a passionate Project Manager – Print Production. Your Role Receive and process routine and complex client orders. Respond to inquiries and/or customer issues related to orders. Maintain positive ongoing relationships with customers and sales staff. Utilize knowledge of products, logistics, production planning, and inventory management to ensure that client orders are fulfilled

Spring Lake, NC 28390 • (44.5 miles) • Full Time • 10/6/2026

Overview WHY COOLSYS? At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with: Competitive Compensation: Competitive pay $25-42/hour (DOE). Ongoing Education & Training: Access to state-of-the-art facilities and paid online training. Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing. Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.

Fayetteville, NC 28301 • (40.1 miles) • Full Time • 10/5/2026

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris South is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the southeast U.S. We serve manufacturers in Alabama, Arkansas, Georgia, Mississippi, North Carolina, South Carolina, Tennessee, and Virginia. Our mission is to help manufacturers from all industry sectors achieve a

Kenly, NC 27542 • (34.5 miles) • Full Time • 10/3/2026

Key Responsibilities: Respond to roadside and on-site service calls using a fully equipped service truck. Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial. Diagnose and repair tire-related issues and perform light mechanical repairs as needed. Inspect tires and wheels for wear, damage, and proper inflation. Perform fleet inspections and preventative maintenance checks when required. Operate tire pressure monitoring systems (TPMS) and other diagnostic tools. Maintain the service truck, tools, and equipment in safe operating condition. Follow DOT regulations, company safety policies, and traffic laws at all times. Provide exceptional customer service, including clear communication of service details and timelines. Ass

Warsaw, NC 28398 • (10.5 miles) • Full Time • $70,000 to $90,000 / yr • 10/28/2026

Process Engineer The Plant Process Engineer fulfills a key role in the Technical Operations Group, providing front-line engineering knowledge, diagnostic and troubleshooting leadership, and implementation of problem-solving corrective actions for the operations technical team. Additionally, the successful candidate will drive implementation of continuous improvement in plant equipment systems, instrumentation and control systems, and operations practices to enhance operational stability and to drive gains in plant online availability and production output. NEW GRADS ARE WELCOME TO APPLY! Duties Support Plant Manager in all engineering technical aspects of Warsaw plant operations Develop depth of knowledge and subject matter expertise in all plant areas: Process technology and equipment bes

Kinston, NC 28504 • (31.4 miles) • Full Time • $45.00 to $57.00 / hr • 10/28/2026

Job details: Job Title: NDI Technician (TD3000) Location: Kinston NC 28504 Duration: 3+ Months (Possibilities of extension) Pay Rate: $45-$57 per hour (All inclusive) Duties: Responsible for using analysis techniques to evaluate the properties of a materials, components or systems without causing damage. Utilize Non-Destructive inspection methods (liquid penetrant, magnetic particle, thermography, stereography, eddy current, ultrasonic, radiography) to verify parts and processes are in compliance with customer engineering requirements. Level II: (Job level 3 or less) Set-up and standardize NDI equipment, process parts, interpret and evaluate for acceptance or rejection, and document results. Establish techniques from approved general procedure or work instructions for final approval. Condu

Wilson, NC 27893 • (42.5 miles) • Full Time • 10/28/2026

The Fountain Group iscurrently seeking a Quality Specialist I (Assistant) for a prominent client of ours. This position is located at Wilson, NC .Details for the position are as follows: Quality Specialist I (Assistant) Location: Wilson, NC Pay Rate: $27/hr Duration: 1-Year Contract (Extension Potential) Shift: Normal Day Shift Job Description Seeking an entry-level Quality Specialist I to perform routine quality testing and inspection of incoming pharmaceutical packaging components, including HDPE bottles, foils, films, and plastic caps. Responsibilities include laboratory testing, data entry, GMP documentation, investigation support, and participation in root cause analysis activities. Perform incoming component inspections and laboratory testing using calipers, Magna-Mike instruments, F

Wilson, NC 27893 • (42.5 miles) • Full Time • 10/28/2026

Roles & Responsibilities: Ensure the site validation program has been developed and maintained in compliance with all regulatory and corporate requirements and Master Plans. Works with the applicable qualification teams representing Quality Assurance in the requirement, design review, construction, qualification and leveraging documentation strategies, cleaning development/validation and implementation of project. Review and approve commissioning and qualification documentation, including URS (User Requirements Specifications), IQ (Installation Qualification), OQ (Operational Qualification), and PQ (Performance Qualification) protocols and reports, SOP's, Work Instructions and any other technical document. Review and approves validation protocols and reports (analytical, cleaning, process,

Wilson, NC 27893 • (42.5 miles) • Full Time • $25.00 to $28.00 / hr • 10/28/2026

Join a Global Leader in Workforce Solutions – Net2Source Inc. Who We Are Net2Source Inc. isn't just another staffing company, we're a powerhouse of innovation, connecting top talent with the right opportunities. Recognized for 300% growth in the past three years, we operate in 34 countries with a global team of 5,500+. Our mission? To bridge the talent gap with precisionRight Talent. Right Time. Right Place. Right Price. Job Title: Quality Specialist - I (#MSD1JP00004038) Location: 4633 Client Road, Wilson, NC 27893 (Onsite) Duration: 12 Months Contract Pay Rate: $28.00/Hr on W2 Shift: 8 AM to 5 PM (Monday – Friday) – 40 Hours/Week JOB DESCRIPTION This is an entry level position. The primary responsibilities are routine laboratory testing of incoming components such as HDPE bottles, foils,

Wilson, NC 27893 • (42.5 miles) • Full Time • $25.00 to $29.00 / hr • 10/28/2026

This is an entry level position. The primary responsibilities are routine laboratory testing of incoming components such as HDPE bottles, foils, films, plastic caps, etc. Additional responsibilities include entering data into Labware, participation in investigations, participating in root cause analysis sessions, occasional minimal troubleshooting of instrumentation issues, and participation in the daily tier process. Testing equipment utilized include but are not limited to calipers, Magna Mike, FTIR, and balances. The job requires a good knowledge of GMP documentation and a good team mindset. Education Requirements B.A./B.S. degree (Science or Engineering) Or an Associate degree with 3 years pharmaceutical experience Or a high school diploma with 5 years pharmaceutical experience. Requir

Wilson, NC 27893 • (42.5 miles) • Full Time • 10/28/2026

Job Title: Quality Specialist, Change Control Management Location: Wilson ,NC Duration:06 months on contract Description: Position Summary The Quality Specialist, Change Control Management, is responsible for the administration, oversight, and continuous improvement of the pharmaceutical Change Control Program. This role ensures that changes to facilities, equipment, processes, computerized systems, materials, specifications, and quality systems are evaluated, documented, approved, implemented, and closed in compliance with current Good Manufacturing Practices (cGMP), FDA regulations, ICH guidelines, and company quality standards. The position partners cross-functionally with Manufacturing, Engineering, Validation, Supply Chain, Regulatory Affairs, and Quality Control to assess impact, man

Wilson, NC 27893 • (42.5 miles) • Full Time • $39.92 to $40.00 / hr • 10/28/2026

This is an entry level position. The primary responsibilities are routine laboratory testing of incoming components such as HDPE bottles, foils, films, plastic caps, etc. Additional responsibilities include entering data into Labware, participation in investigations, participating in root cause analysis sessions, occasional minimal troubleshooting of instrumentation issues, and participation in the daily tier process. Testing equipment utilized include but are not limited to calipers, Magna Mike, FTIR, and balances. The job requires a good knowledge of GMP documentation and a good team mindset. Education Requirements B.A./B.S. degree (Science or Engineering) Or an Associate degree with 3 years pharmaceutical experience Or a high school diploma with 5 years pharmaceutical experience. Requir

Wilson, NC 27893 • (42.5 miles) • Full Time • 10/28/2026

Job Description: Performs a variety of chemical analyses and GMP review in accordance with cGMP, GLP, DEA and company policies and procedures. Responsibilities: Perform routine testing (dissolution, assay/degradant, content uniformity and ID) of drug products in a cGMP laboratory. Complete all assigned testing in a timely and organized manner in accordance with cGMP, GLP, DEA and company policies and procedures. Enter data into laboratory information system and accurately document all necessary and relevant information in a clear concise manner as per cGMPs. Operate and maintain all analytical instrumentation and equipment as per established procedures; perform basic troubleshooting. Communicate openly within the group to provide and gather information, to optimize the use of resources and

Clinton, NC 28328 • (12 miles) • Full Time • 10/27/2026

Sampson Regional Medical Center is hiring a Quality Improvement and Infection Control Coordinator to join the Quality Service team! Description: The Quality Improvement and Infection Control Coordinator is responsible for supporting Sampson Regional Medical Center's (SRMC) mission of excellence in patient care delivery and outcomes. The coordinator in collaboration with the Quality Service Department will utilize a data driven, and best practices approach to measurably improve process and patient outcomes. Strategies will include infection prevention and process improvement principles. The coordinator will be responsible for data collection and analysis for improvements, staff education, and regulatory reporting. The coordinator will support regulatory readiness, and compliance with local,

Goldsboro, NC 27530 • (18.1 miles) • Full Time • 10/27/2026

About Company: What Does Prolec GE Waukesha Do? JOB SUMMARY To setup, operate, load and unload CNC machines to produce parts that will achieve optimum quality and efficiency levels while meeting the requirements of the engineering design. PRINCIPLE DUTIES AND RESPONSIBILITIES Interprets and understand simple and complex part drawings. Uses precision measuring tools such as micrometers, Vernier’s, scales, protractors, compass, height gage, dial indicators, etc. Uses machine control codes, computers, and part nesting, DNC links, and file transfers to produce parts. Utilizes machine control capabilities to make simple part programs, prove out programs and edit programs as a normal part of the setup and operation of CNC machines and related equipment. Performs normal operator maintenance as pr

Clinton, NC 28328 • (12 miles) • Full Time • $17.00 to $18.00 / hr • 10/27/2026

Position Overview We are seeking a detail-oriented and dependable Quality Assurance (QA) Technician to support quality control and production operations at a plastics manufacturing and recycling facility in Clinton, North Carolina. The ideal candidate has experience with quality testing, sampling, production documentation, and basic equipment troubleshooting. This role is responsible for ensuring materials meet established quality specifications, identifying contamination or process issues, maintaining accurate records, and supporting safe and efficient production. Candidates with previous experience in plastics manufacturing, recycling, laboratory testing, or industrial quality control are strongly encouraged to apply. Key Responsibilities Collect and test incoming raw materials and finis

Lillington, NC 27546 • (43.1 miles) • Full Time • $20.00 to $22.00 / hr • 10/27/2026

Build Premium Entry Solutions with a Team That Invests in You Boon Edam is the world’s market leader in entry solutions. We combine the scale of a 1,400+ person organization with the heart of a family company. Many of our colleagues started early in their careers and advanced through internal training and career development programs. Join us to shape products that greet millions of people every day. Your Impact You will set up and run complex sheet metal forming operationsmaking minor CNC program edits and offsets on laser and press brake equipmentto produce parts to spec and deliver them cleanly to the next step in our process. Core Responsibilities Safety & Standards: Practice safe work habits and follow all safety policies and guidelines. Materials & Inventory: Maintain accurate invento

Wilson, NC 27893 • (42.5 miles) • Full Time • $20.00 to $26.00 / hr • 10/25/2026

Johnson Industrial Machinery Services is hiring a Stainless Steel & Aluminum Fabricator to join our growing team. This position plays a critical role in producing high-quality stainless-steel and aluminum components for custom fabrication projects for various types of industry. If you take pride in precision, consistency, and craftsmanship, we want to hear from you. What You’ll Do Read and interpret blueprints, drawings, and specifications Cut, shape, and assemble stainless steel & aluminum materials Perform TIG and MIG welding , grinding, polishing, and finishing Ensure accurate measurements and high-quality results Inspect finished work and correct any defects Maintain a clean, organized, and safe work environment Follow all shop safety procedures and standards Work alongside fabrication

Kinston, NC • (34.6 miles) • Full Time • $40.00 to $50.00 / hr • 10/25/2026

MUST already haveNAS-410 Certification and proof of UT hours (Signed off by a Level III NDI). Must have level I and Level II training (proofs) plus an additional 800hrs. minimum of UT. Candidate has to provide Proof of Training and OJT for Level II Ultrasonic NAS410 Certification, Signed Off by a Level III NDI Ultrasonic phased array, automated immersion, automated modified immersion and manual phased array. Hands on experience onNon-Destructive inspection methods (ultrasonic) Experience with Graphite Composites in relation to Aerospace. Responsible for using analysis techniques to evaluate the properties of a materials, components or systems without causing damage. Utilize Non-Destructive inspection methods (liquid penetrant, magnetic particle, thermography, shearography, eddy current, ul

Wilson, NC • (44.5 miles) • Full Time • 10/24/2026

JOB TITLE: QA/QC- Process Piping SUMMARY: Quality Control inspection and associated documentation of Process Piping systems within a cleanroom environment. DUTIES AND RESPONSIBILITIES: Coordinate compliance of OSHA, EPA, and other federal, state, and local regulatory Responsible for inspecting all fabricated and installed piping, mechanical equipment, skids, modular systems, and components per project specifications. Perform all necessary testing including but not limited to Nondestructive Testing, visual and Borescope inspections, and witness all pressure tests, flushing, cleaning, and passivation of fabricated and installed pipe. Review and approval of Quality Plans, ITPs, PQR, WPS, WPQ, inspection procedures, records for installed pipe which would include weld map log, PMI, slope checks

Dunn, NC 28334 • (24.6 miles) • Full Time • 10/24/2026

Are we the road to your future? We are currently searching for talented CEI Inspectors to support our Carolinas Region statewide in North Carolina . This position welcomes candidates who are willing to commute from South Carolina to work in the state of North Carolina. To be considered for this position, applicants musthave, at minimum, an Associate's degree in an applicable area of Engineering Technology, Survey Technology or a related curriculum from an appropriately accredited institution. The successful candidate will perform technical duties supporting engineers and other professionals in the administration of highway construction. Such areas include, construction inspection, project roadway/structure inspection, materials testing, project surveying, and program/regulatory compliance.

Kinston, NC 28504 • (31.4 miles) • Full Time • 10/24/2026

Support quality team, perform data analysis and root cause analysis Analyze and provide material review disposition for nonconforming materials, parts and equipment Participates in design and product reviews to ensure that producibility, inspect ability, reliability, safety, Quality, System integrity and business process management objectives are met. Performs root cause analyses. Recommends and supports the implementation of corrective actions that are necessary to reduce or eliminate nonconformance to design specifications. Interfaces with stake holders to ensure compliance with requirements. Define process flow, performs PFMEA & Control plan. To understand and implement a Quality Management System in a program. Studying the overall Non-Conformances revenue based on Scrap, Rework and Rep

Kinston, NC • (34.6 miles) • Full Time • $36.00 to $41.00 / hr • 10/24/2026

Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI’s as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management. Aerospace line experience required Job Responsibilities: Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI’s – AS9102 Experience with hand measurement tools Knowledge of CMM Inspection process Knowledge and e

Wilson, NC 27893 • (42.5 miles) • Full Time • 10/23/2026

Senior Plant Engineer (Excellent Full Benefits Package, Competitive Compensation/Bonus Structure, Relocation Assistance and more!) We are currently hiring for a skilled Plant Engineer to join our team! As the leader of the maintenance and engineering department in a fast-paced plant, you'll be at the forefront of maintaining top-tier building and equipment performance. By reducing mechanical downtime and ensuring seamless product flow, you’ll keep our production lines running at peak efficiency. You'll lead the charge in developing and implementing cutting-edge maintenance systems, including Preventive and Predictive Maintenance, TPM, and more, driving our plant to new heights as part of a High-Performing Manufacturing Organization. Position Responsibilities: · Take ownership of capital pr

Clinton, NC 28328 • (12 miles) • Full Time • $13.25 to $15.25 / hr • 10/23/2026

Step into a Day on Our Sow Farm At General Labor Services, your morning begins in the farrowing and breeding barnschecking sows and litters, confirming feed and water access, and assessing animal well-being. As the day unfolds, you help with processing and vaccinating, assist with animal movement, and support weaning and loading activities. Between tasks, you sanitize pens, walkways, equipment, offices, and laundry areas to protect herd health through strict biosecurity. Throughout it all, you document observations, track animal data, and promptly report any irregularities so the team can take quick action. What You Will Do Deliver daily husbandry: feed, water, monitor health, process, vaccinate, and assist with breeding, farrowing, weaning, movement, and loading. Clean and disinfect barns

Kinston, NC 28504 • (31.4 miles) • Full Time • $25.00 / hr • 10/23/2026

JOB DESCRIPTION Logistics & Production Scheduling Specialist Functional Area Position Purpose The Logistics & Production Scheduling Specialist role is responsible for coordinating logistics operations, planning shipments, and managing production schedules to ensure efficient workflows, optimal resource utilization, and on-time customer deliveries. Supports production planning, inventory management, and transportation coordination while working closely with production, warehouse, and customers. Position Level Support Department Logistics Span of Control Indirect (no direct reports) Direct Reporting Line Logistics Manager Acts as a Substitute for Other logistics or warehouse personnel as assigned Substituted by Designated warehouse or logistics team member External Relations Customers, carri