Canton, NC 28716 • (32.5 miles) • Full Time • 10/10/2026

ConMet - Canton location is looking for a Sr. Plastics Tooling Enginer to manage the design, development, release, repair, and continuous improvement of injection molding tooling to ensure safe, cost-effective, high-quality production of plastic parts. The Sr. Engineer provides problem-solving support for the production of both new and replacement tooling programs and leads the Tooling Technician group at the ConMet – Canton location.What You Will Do:Provide input for all tooling decisions and serve as key contact for project coordination and status.Coordinate the interval refurbishments of injection mold tooling onsite.Lead vendor quoting and site visits for outside tooling suppliers to support complex repairs that cannot be completed in-house.Provide direction, training, and coaching to

Canton, NC 28716 • (32.5 miles) • Full Time • 10/10/2026

Your day at ConMet Canton Step onto the floor of our Canton facility and take the lead at your molding press. You’ll begin by reviewing work instructions, then move through a steady rhythm of productioninspecting, assembling, labeling, and packing parts that meet our exacting standards. Throughout the shift, you’ll capture production and scrap data, keep your station spotless, and stay vigilant about safety.Inspect, assemble, label, and pack parts per work instructionsRecord production and scrap information in the systemMeet or exceed production and quality standardsMaintain an organized, clean workstationEscalate unresolved product or equipment issues to your supervisor/leadFollow all plant safety and environmental policies and procedures What you bring High school diploma or GED strongl

Brevard, NC 28712 • (25.7 miles) • Full Time • 10/9/2026

The Quality Control Inspector I will inspect raw materials, machined parts, in-process inspection of manufacturing processes and final inspections of finished products.Essential Job Functions:Receiving inspection of raw materials, machined parts and sub-assemblies.In-process inspection of manufacturing processes.Final inspection of finished assemblies.Use calipers, micrometers, depth gage, height gage, surface plate, pin gages, threaded plug/ ring gages, optical measurement equipment, wire pull testers, durometer testers and other mechanical inspection tools.Document inspection results as defined by QC procedures.Read and interpret component, sub-assembly and final assembly prints.Identify and control non-conforming material.Visual inspection of solder joints.Use electrical measurement and

Canton, NC 28716 • (32.5 miles) • Full Time • 10/9/2026

Manufacturing AssociateCanton, NCFull-time | Weekly Pay | BenefitsPay $20.00 per hour + $2 per hour shift differential = $22.00 per hour2nd (8 Hours) Monday-Friday 2:30pm - 11:30pm;currently working OT on 10-hour shifts: 4:30 pm - 3:00amMust be willing to work flexible hours, including mandatory and voluntary overtime as needed.APPLY NOW: https://iwsllc.applytojob.com/apply/2wv5hBaUWg/Manufacturing-Associate?source=FactoryFixImpact Workforce Solutions is hiring for ConMet inCanton, NC. We are currently looking for Manufacturing Associates.Impact is proud to offer an industry leading benefits and wellness package, with eligibility for some programs beginning Day 1!Our positions are full-time, year-around employment with paid training.We offer:5 Days of PTO6 Paid HolidaysUp to 50% of health

Hendersonville, NC 28791 • (44.2 miles) • Full Time • 10/9/2026

ESP Associates, Inc. is seeking a full-time Survey CAD Technician in our Hendersonville, NC office.Qualifications:Associate degree or higher in surveying technology/geomatics, civil engineering, or related field, and/or registration as a SIT preferred, but not required.5+ years’ experience in land surveying preferred.Candidate will be required to demonstrate strong self-motivational and organizational skills, experience with survey computations and platting, as well as field experience required.Position requires work to be performed in the office as well as the field.Land Development survey experience required with emphasis on commercial, residential, various route types, and construction layout a plus.Experience with Trimble data collection, GPS receivers, robotic total stations, Civil 3d

Mills River, NC 28759 • (41.4 miles) • Full Time • 10/9/2026

Description: POSITION SUMMARY: The Shop Technician provides timely completion of repairs and maintenance to various construction equipment and machinery within shop at Ascendum Branch locations, according to established procedures, while maintaining good working relationships with customers and co-workers.FLSA STATUS: The U.S. Fair Labor Standards Act (FLSA) requires employers to classify their employees as being either exempt or non-exempt for the purpose of being paid overtime wages. The essential duties of this job are such that the employee is classified according to the FLSA as a Non-Exempt employee.EQUAL OPPORTUNITY: Ascendum makes recruitment, employment, promotional and all other People and Culture decisions without regard to race, color, religion, national origin, age, sex, gender

Hendersonville, NC 28791 • (44.2 miles) • Full Time • 10/9/2026

Lassonde Pappas & Co.is a USLeader in beverage manufacturing dedicated to our team members, customers and consumers satisfaction. We remain committed to our small-town roots and rural values. Hardworking and caring are qualities that make our teams special. Since 1942, we’ve been producing delicious products for our customers across the country!To provide the best for our customers, we focus on building the best team by creating and advancing an inclusive environment amongst our diverse workforces. If you’re passionate about customer satisfaction, reliable, and committed to being and doing better, join us!We value each of our employees’ total wellbeing. To support employees in all stages of their wellness journey, we have a robust benefits program including medical, dental, and vision cove

Cleveland, GA 30528 • (45 miles) • Full Time • 10/9/2026

Nos alegra que ests aqu. Pinsalo: t y nosotros? Parece que podramos ser una pareja perfecta en el paraso de la carne. Si ests aqu por:Papas fritas rizadas con descuento (y todos los artculos de nuestro men, de hecho)Horario flexibleComidas gratuitas por turno*La mejor capacitacin en su clase y aprendizaje continuoOportunidades de progresoTiempo libre remunerado*Plan de jubilacin 401(k)*Beneficios de matrcula*Mdico, dental y de la vista*Campeones de la esperanza*Programa de recomendacin de efectivoHerramienta de apoyo para el bienestar en el viajePrograma de descuentos PerkSpotPrograma de reconocimientoProgramas de calzado antideslizanteParticipacin comunitaria y caritativaPrograma de subvenciones Encendiendo sueosConcursos de entrenamientoBueno, ests en el lugar correcto. Tambin ests en el

Westminster, SC 29693 • (27.6 miles) • Full Time • 10/8/2026

Hi-Tech Mold Carolina, a full-service supplier to the automotive plastics industry, located in Westminster, SC has openings for night shift Mold Technicians. If you want to be part of a great team in a fast-paced growing company, this is the opportunity you have been waiting for! Our team members enjoy: a comprehensive benefit package, competitive wages, 401k with employer match, paid vacation, paid holidays, education reimbursement program, wellness program, and corporate sponsored team-building events.Qualified applicants must have a minimum of 5 years Injection Mold Making experience; proficient at general disassembly and reassembly of TH & BH Blocks including repairs and preventative maintenance. Must be able to diagnose and correct electrical or hot runner system repairs, manufacture

Westminster, SC 29693 • (27.6 miles) • Full Time • 10/8/2026

Injection Mold Operator Baxter Manufacturing | Westminster, SCEarn Up to $19.00 Per Hour Starting Pay Starting Pay:$16.00/hour base rate starting+$1.50/hour shift differential for 2nd and 3rd shifts+$1.50/hour attendance incentive for any week with perfect attendancePotential Hourly Earnings: Up to $19.00/Hour Join a Growing Team in the Automotive Industry Baxter manufacturing is a leading full-service supplier to the automotive plastics industry, and we're growing. We're looking for reliable, motivated individuals to join our manufacturing team as Injection Mold and Assembly Operators.Whether you're looking to start a new career or grow your manufacturing experience, Baxter offers competitive pay, outstanding benefits, and opportunities for advancement in a fast-paced, team-oriented envir

Westminster, SC 29693 • (27.6 miles) • Full Time • 10/8/2026

Position SummaryThe Manufacturing Engineer is responsible for developing, evaluating, and continuously improving manufacturing processes to enhance safety, quality, productivity, and cost efficiency. This role applies engineering principles and technical expertise to optimize production methods, equipment, tooling, and workflow while supporting a lean manufacturing environment. The Manufacturing Engineer collaborates closely with Operations, Quality, Engineering, and Supply Chain teams to ensure efficient and effective manufacturing processes that meet business objectives.Key ResponsibilitiesAnalyze manufacturing processes and implement improvements to increase efficiency, reduce waste, and optimize production performance.Evaluate workforce utilization, workflow, equipment placement, and f

Westminster, SC 29693 • (27.6 miles) • Full Time • 10/5/2026

Company Description Ulbrich Stainless Steels & Special Metals, Inc. is a high-precision, value added processor of Stainless Steels,Nickel Alloys, Titanium Alloys, Cobalt Alloys, Niobium, Tantalum, Nitinol for a wide range of difficult-to-manufacture, niche-market applications such as aerospace jet engine seals, nuclear reactor fuel cages, heart pacemaker containers, PV ribbon, computer chip substrate, chemical processing tower components, automotive airbag burst disks, automotive oxygen sensors, medical catheters, and cell phone key pads.The material is made in the forms of precision strip and Ultralite foil, shaped (profile) wire, and precision flat wire in micro dimensions. This company was established in 1924, is a Connecticut company, and is privately held. It has 9 wholly owned subsid

Travelers Rest, SC 29690 • (43.9 miles) • Full Time • 10/3/2026

Industrial Maintenance Mechanic Travelers Rest, SC Compensation: $30–$35 per hour, commensurate with experienceSchedule: Full-Time, Monday–FridayShift Options: 2nd (3:00 PM–11:30 PM) and 3rd (11:00 PM–7:00 AM) A day in this role Your shift begins with a walk-through of the production floor. You review the preventive maintenance queue, lock out a machine under LOTO, and swap a worn conveyor chain before it becomes a downtime event. A line call comes inan intermittent sensor fault on a packaging cell. You trace the control circuit, test the signal with your meter, adjust the proximity sensor, and the line is back up. Later, you inspect a hydraulic power unit, clean a valve screen, verify pump pressure, and update maintenance records. Throughout your day, you partner with production, keep sa

Flat Rock, NC • (44.6 miles) • Full Time • 10/1/2026

SUMMARYSet up and operate a wide range of grinding equipment to generate geometries which cannot be done on other equipment because of size, tolerance, or shape. Grinding equipment and operations vary from simple to complex for the manufacturing of ceramic inserts or cutting tips and ceramic specials to precision tolerances. Operate to applicable production standards and quality standards.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.Set up and operate a wide range of grinding equipment.Read and interpret router, blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, set-up procedures, control settings, and machining methods and sequences. Write program for a variety of different cutting tips. Trouble

Seneca, SC 29678 • (32.5 miles) • Full Time • 10/1/2026

Job SummaryThe Industrial Engineer supports plant performance by analyzing manufacturing processes and implementing practical improvements in safety, quality, delivery, cost, and productivity. Working under the direction of the Engineering Manager, this role applies LEAN methods to reduce waste and improve flow. The engineer collaborates with production, quality, supply chain, and engineering teams and spends regular time on the manufacturing floor.Key ResponsibilitiesCollect and analyze production data, including cycle time, downtime, scrap, rework, work-in-process, overall equipment effectiveness, and labor utilization, to identify trends, bottlenecks, and improvement opportunities.Support Lean and continuous improvement initiatives, including 5S, standard work, visual management, and wa

Sylva, NC 28779 • (20.9 miles) • Full Time • 9/30/2026

Benefits:401(k)Company carDental insuranceHealth insuranceOpportunity for advancementPaid time offTraining & developmentVision insurance Outside Plant Technician I Industry: Telecommunications Position Type: Full-Time Reports To: BWFN Outside Plant Manager Location: Franklin, NC (Within the Western North Carolina Footprint) Years of Experience: 1-3 years in Outside Fiber Plant Education Level: Telecommunications Training or On-The-Job Experience Date Posted: 9/29/26 OVERVIEW: An outside plant technician performs maintenance on plant communication equipment and cabling systems for voice, data, and video imaging. Your responsibilities in this job include installing, testing, troubleshooting, locating fiber, and repairing the cable and fiber network in all phases, or assisting. Other duties i

West Union, SC 29696 • (22.1 miles) • Full Time • 9/29/2026

Shop TechnicianStrickland Brothers 10 Minute Oil ChangeJoin a thriving team where your growth is our priority!At our company, your career path is not just a journey; it’s a fast track to success. We’re committed to advancing our employees' careers and recognizing talent at every level.As a Shop Technician, you’ll be part of a fast-paced, team-driven environment where you learn real skills, work with your hands, and see the impact of your work every day. Many of our leaders started right here in entry-level roles and built successful careers through hands-on learning, teamwork, and performance. This is more than a job. It’s a chance to build a career.If you’re ready to elevate your career and make a meaningful impact, we want you on our team!Why Team Strickland:We invest in our team members

Westminster, SC 29693-3998 • (27.5 miles) • Full Time • 9/28/2026

Exempt Salary Position - First ShiftBasic Qualifications:PRIMARY FUNCTION:Provide technical support to plant operation including leading capital projects, process improvement, implementing new technology, bench marking best in class facilities and implementing best practices in process, equipment, and workflow.ESSENTIAL FUNCTIONS: Assists in the development of process flows for new products, participates in Manufacturing Feasibility Reports.Determines machine parameters and tooling requirements for new and existing products.Supports the development and revision of process specifications and operation instruction sheets.Conducts capability studies on new and existing products and machinery to ensure quality and productivity.Implements new and revised technologies to improve quality and prod

Robbinsville, NC • (39.2 miles) • Full Time • 9/25/2026

DescriptionMorgan Corp.’s Industrial Division is an industrial contractor that self-performs major trades across industrial markets, including power, water/wastewater, water infrastructure, mining, and related sectors throughout the Southeast. We are committed to delivering high-quality work safely through effective planning, skilled execution, and strong teamwork.We are seeking an Electrician to install, maintain, troubleshoot, and repair electrical systems and components on industrial construction projects. This role requires a strong understanding of electrical installation methods, technical drawings, applicable safety practices, and the ability to work productively in a field environment as part of a project team.Work Environment:Work is performed primarily outdoors and on active indu

Westminster, SC 29693 • (27.6 miles) • Full Time • 9/24/2026

Injection Mold Operator Baxter Manufacturing | Westminster, SCEarn Up to $19.00 Per Hour Starting Pay Starting Pay:$16.00/hour base rate starting+$1.50/hour shift differential for 2nd and 3rd shifts+$1.50/hour attendance incentive for any week with perfect attendancePotential Hourly Earnings: Up to $19.00/Hour Join a Growing Team in the Automotive Industry Baxter manufacturing is a leading full-service supplier to the automotive plastics industry, and we're growing. We're looking for reliable, motivated individuals to join our manufacturing team as Injection Mold and Assembly Operators.Whether you're looking to start a new career or grow your manufacturing experience, Baxter offers competitive pay, outstanding benefits, and opportunities for advancement in a fast-paced, team-oriented envir

Westminster, SC 29693 • (27.6 miles) • Full Time • 9/23/2026

Job Description Summary:This team member is responsible for safely fabricating weldments by cutting, burning and welding steel plate, profiles or castings in accordance with AWS D1.1 and D14.1 Standards. They are highly skilled at finish welding operations, fitting operations and/or operations of welding robot per Standard Work Instructions and Safety Procedures. They are highly skilled at reading and interpreting Technical Drawings and Engineering Notifications. This team member is expected to be fully trained on all fabrication operations within the department. They must have proven above average performance and possess a leader attitude. This employee provides for Technician coverage when necessary.Essential functions:The following reflects management’s definition of essential functions

Franklin, NC 28734-7920 • (13.5 miles) • Full Time • 9/22/2026

Description: Positions entail the repair and troubleshooting electronics. The products involved will be for airborne, ground-base, and maritime military applications. Requirements include knowledge and experience in analog and digital electronics.Requirements: Required Skills:Education and/or experience is requiredExperience with test equipment: multimeter, oscilloscope, electronic loads, LCR meter, etc.Experience reworking PCBsSoldering skills are required (experience with military and IPC soldering standards desired, but not required)Understanding of discrete digital logic devicesUnderstanding of AC and DC motorsSECURITY CLEARANCE:Applicants selected must meet eligibility requirements for access to classified information. U.S. Citizenship may be required.

Seneca, SC • (29 miles) • Full Time • 9/20/2026

Company OverviewPerry Ellis International, Inc. represents a diverse portfolio of lifestyle apparel brands. The Company, through its wholly owned subsidiaries owns and licenses nationally and with a brand portfolio of over 40 Brands domestically and internationally recognized brands including: Perry Ellis®, Original Penguin® by Munsingwear®, Laundry by Shelli Segal®, Rafaella®, Cubavera®, Ben Hogan®, Savane®, Grand Slam®, John Henry®, Manhattan®, Axist® and Farah®. The Company enhances its roster of brands by licensing trademarks from third parties, including: Nike® for swimwear, and Callaway®, PGA TOUR®, and Jack Nicklaus® for golf apparel.SUMMARYOperate embroidery machines to create designated garments and pieces. Load and ready fabric, threads, needles and goods. Follow style, color and

Liberty, SC 29657 • (35 miles) • Full Time • 10/8/2026

Production Assembler – Medical Device Manufacturing | 1st ShiftPay: $16.50/hrSchedule: Monday–Thursday, 7:30 AM–5:30 PMShift: 1st ShiftExperience: No prior manufacturing experience requiredEducation: High School Diploma or GEDJob SummaryWe are hiring a Production Assembler to support the manufacturing of high-quality medical device components used in implantable cardioverter defibrillators (ICDs). Working under close supervision, the Production Assembler will perform a combination of assembly, testing, repair, and production tasks according to established procedures and detailed work instructions.This is an entry-level opportunity, and prior manufacturing or medical device experience is not required. Candidates should be dependable, safety-conscious, detail-oriented, and comfortable perfor

Waynesville, NC 28786 • (30.5 miles) • Full Time • 10/10/2026

JOB TITLE:Production Assembler, Full Time, Part Time, Day ShiftEMPLOYEE STATUS: Hourly, non-exemptJOB DESCREIPTION: Perform a series of assembly tasks to manufacture assigned products.START WAGE: 1st Shift: $14.00 - $16.90 per hourTERRIFIC BENEFITS (Must work 30 hours per week): Health and Dental Insurance (company pays a portion), Paid Time Off (Less than 1 year - 10 days - accrual earned per regular paid hours), Paid Holidays, 403b Retirement Plan - (company match up to 4% after 60 days), Paid TrainingPaid Benefits include Short/Long Term Disability and Life Insurance (2 x annual salary)Colonial offers a variety of supplemental policies such as Accidental Care Insurance, Cancer Insurance, Additional Life Insurance, Vision, and Flex Spending AccountWORK SCHEDULE (Flexible Hours):1st Shift

Liberty, SC 29657 • (35 miles) • Full Time • 10/8/2026

Shift: 1st Shift Monday through Thursday, 7:00 AM–5:00 PMJob Description:This position is responsible for the production of high-quality medical devices components within a manufacturing environment. Working under close supervision, the employee may perform a combination of assembly, repair, and test operations on medical device assemblies used in implantable cardioverter defibrillators (ICDs). Prior manufacturing experience is not required; however, candidates must be able to follow instructions, work safely, and maintain consistent attendance.Key ResponsibilitiesPerform assembly, testing, and/or production tasks according to specified and/or standardized proceduresParticipate with the Manufacturing Supervisor/Manager in setting and monitoring individual goals and daily process performanc

Powdersville, SC • (44 miles) • Full Time • 10/8/2026

TRC Talent is looking for a Machine Operator in Piedmont, SC!We are seeking an experienced Extrusion Blow Mold (EBM) Machine Operator to support our growing production needs. This role is critical in ensuring the efficient operation of blow molding equipment and maintaining high-quality output. Unlike general production roles, this position requires hands-on expertise in managing a complex thermal and mechanical process. The ideal candidate will have strong experience in EBM operations, machine setup, troubleshooting, and process optimization.Job DetailsSeeking candidates that are open to working 1st, 2nd and 3rd shift6AM-2PM, 2PM-10PM & 10PM-6AM$20-25/hr + shift & performance premiumTemp to Hire ~ 90 days based on performanceWhat You'll Be DoingOperate and monitor extrusion blow molding m

Cornelia, GA 30531 • (43.7 miles) • Full Time • 10/6/2026

Loom Technician – Night ShiftSolmax | Cornelia, GAFull-Time | 12-Hour Night Shift | 8:00 PM–8:00 AMJoin SolmaxSolmax is a global leader in geosynthetics manufacturing, providing innovative products used in construction, infrastructure, environmental protection, mining, agriculture, transportation, and other critical industries.We are looking for an experienced Loom Technician to join our manufacturing team. If you have hands-on weaving experience, enjoy troubleshooting equipment, and take pride in keeping production running safely and efficiently, we want to hear from you.What You’ll DoAs a Loom Technician, you will be responsible for maintaining and repairing looms within your assigned area to help ensure safe, reliable, and efficient production.Key responsibilities include:Perform preven

Pendleton, SC 29670-9109 • (36.8 miles) • Full Time • 10/5/2026

Description: The General Mechanic – Loom Technician is responsible for ensuring all looms are operating at peak performance and per manufacturing specification. Perform all operational maintenance on looms, general machine repair, machine setup and general operation.Primary DutiesMaintain, troubleshoot, and repair weaving looms in accordance with proper preventive maintenance procedures according to schedule.Perform preventative maintenance and lubrication on machinery and /or equipment according to schedule.Perform emergency/unscheduled repairs of looms during production. Work with Operators to troubleshoot and repair flagged looms.Conserve maintenance resources by using equipment and supplies as needed to accomplish job results.Read and interpret equipment manuals and work orders to perf

Liberty, SC 29657 • (35 miles) • Full Time • 10/3/2026

Pay Range: $13.40hr - $18.40hrJob Overview:This position is responsible for producing high-quality medical device components within a manufacturing environment. Working under close supervision, the successful candidate may perform a combination of assembly, repair, and test operations on medical device assemblies used in implantable cardioverter defibrillators (ICDs). Prior manufacturing experience is not required; however, the candidate must be able to follow instructions, work safely, and maintain consistent attendance.Key Responsibilities:Perform assembly, testing, and/or production tasks according to specified and/or standardized procedures.Participate with the Manufacturing Supervisor/Manager in setting and monitoring individual goals and daily process performance metrics.Follow all s

Liberty, SC • (33.7 miles) • Full Time • 10/1/2026

DescriptionJob Summary: The Valve Assembler assembles and tests fire protection valves for the organization.Work Environment:The physical environment requires the employee to work in a climate-controlled manufacturing environment.Required to use personal protective equipment while on the jobHow You Will HelpPromote a safe workplace by performing all tasks in a safe and thoughtful manner in compliance with all rules, procedures, instructions, devices, equipment and use of appropriate personal protective equipment. Maintain vigilance for any hazardous conditions or practices in the workplace and immediately report any unsafe condition or practice to your supervisor.Analyze work orders, blueprints, shop data, and/or descriptions to determine the materials required to assemble the valves as re

Travelers Rest, SC • (43.2 miles) • Full Time • 9/30/2026

Shop Operator 1|Traveler’s Rest,SC|1stshift |$16.00 -$20.00 per hour |Monday - Friday8:00am –5:00pmWhat Matters MostLocation: Traveler’s Rest, SC1stShift: 8:00 am – 5:00 pm Monday – FridayPay: $16.00 - $20.00 per hour depending on experienceGreat attendancePositive attitude, self-motivatedStrong work ethicJob DescriptionAssist with grinding (hand grinder)Assist with checking parts (Inspection depart)Assist with marking parts / painting partsAssist with pulling ordersAssist with boxing parts in the warehouseMaintains safe and clean work environment, sweep, dust and mop.Wear the proper safety equipment at all timesAny other duties as requested by respective supervisor and/or managerJob Qualifications1+ years of general warehouse relatedexperienceExperience with manufacturing / shop environme

Liberty, SC 29657 • (35 miles) • Full Time • 9/29/2026

Job SummaryWe are hiring Industrial Mixers in Liberty, South Carolina, where we produce high-quality pancakes and waffles. In this role, you will operate industrial mixing equipment to prepare batters and doughs following strict recipes and production standards. You will be responsible for scaling and verifying ingredients, monitoring mix times and temperatures, documenting batch data, and ensuring consistent quality in every batch. Maintaining a clean and safe work area, following food safety protocols, and communicating any issues to supervisors or maintenance staff are also key responsibilities.Work Schedule1st Shift:6:00 AM - 2:30 PM (Mon–Fri); weekends as needed2nd Shift:2:00 PM – 10:30 PM (Mon–Fri); weekends as needed3rd shift:10:00 PM - 6:30 AM (Mon–Fri); weekends as neededBenefits4

Cornelia, GA 30531 • (43.7 miles) • Full Time • 9/29/2026

For those who want to keep growing, learning, and evolving. We at Kelly® hear you, and we’re here for you! We’re seeking a Hacoba Operator to work at a premier manufacturing client in Cornelia, GA. Sound good? Take a closer look below. You owe it to yourself to consider this great new opportunity.Salary/Pay Rate/Compensation: $19.50 per hourShift: Rotating 6:45pm to 7:15amWhy you should apply to be a Hacoba Operator: Competitive pay rate and rotating shift schedule for work-life balance.Opportunity to work with a leading organization known for innovative surgical technologies.Robust safety culture and adherence to industry-leading quality standards.Supportive team environment with opportunities for growth and skill development.Gain experience in advanced manufacturing and production proces

Easley, SC • (38.4 miles) • Full Time • 9/27/2026

Openwork is currently engaged in a search to find a Sewing Machine Operator in Easley. In this Sewing Machine Operator role, you will be responsible for the operation of two types of sewing machines. Apply today if you meet the qualifications listed below. In a Sewing Machine Operator role, you’ll be responsible for: Operating sewing machinesMeasuring fabric and working with trims and zippers What you’ll need: Prior sewing experience Perks: Medical, dental, and vision benefits1st shift schedule off by 4:00pm with weekends off Great contract to hire opportunity on 1st shift with a Monday through Friday schedule. Pay ranges from $16 to $20 per hour depending on experience. Click on Apply Now to be considered for this Sewing Machine Operator job in Easley or visit our website www.openwork.co

Liberty, SC 29657 • (35 miles) • Full Time • 9/26/2026

Position: Manufacturing OperatorLocation: Liberty, SCEmployment Type: Contract (Strong possibility of extension or permanent conversion)Schedule: Monday – Thursday | 5:30 PM – 3:30 AM (4x10 schedule / 3-day weekends)Pay Rate: $16.78 – $18.52 / hourPosition OverviewWe are seeking a detail-oriented Manufacturing Operator to support the production of life-saving cardiovascular medical devices in Liberty, SC. In this role, you will work within a specialized manufacturing cell (including controlled cleanroom environments) performing precision assembly, testing, visual inspection, and packaging in accordance with strict quality and safety standards.Key ResponsibilitiesPerform intricate mechanical and electronic assembly of cardiovascular devices and components using microscopes, precision hand t

Travelers Rest, SC 29690-8495 • (43.2 miles) • Full Time • 9/26/2026

Description: Production Operator IJob DescriptionEntry Level Production Operators serve in a learning capacity of processing raw machined components into finished suppressors and firearms accessories. They are trained to strictly adhere to all workplace safety guidance. They learn to efficiently conduct scheduled Preventative Maintenance on all Production equipment, as well as safe operation of all material handling equipment, manual and automated media blast stations, and metal preparation machinery. This role requires flexibility for frequent assignment changes but also the ability to perform repeated single tasks indefinitely, to the highest degree of accuracy. This role will require occasional overtime.Reporting ApprovedManager, ProductionResponsibilitiesMedia BlastingDeburring partsRa

Lavonia, GA 30553 • (42.6 miles) • Full Time • 9/22/2026

Position SummaryThe Saw Operator is responsible for accurately cutting structural steel, tube, pipe, plate, and miscellaneous materials used in the fabrication of steel stairs, handrails, guardrails, and ornamental rail systems. This position ensures materials are cut to specification, properly identified, and prepared for fabrication while maintaining quality, safety, and production standards.Essential Duties and Responsibilities:Operate band saws, cold saws, and other cutting equipment safely and efficiently.Read and interpret shop drawings, cut lists, work orders, and fabrication prints.Measure, mark, and cut steel materials to precise dimensions and tolerances.Verify material type, size, and quantity before processing.Maintain proper identification and traceability of materials through

Lavonia, GA 30553 • (42.6 miles) • Full Time • 9/19/2026

A day in the lifeIn Lavonia, GA, you step onto the production floor, review the work order, and pull the right tooling. You reference prints, set your bend sequence, and dial in the press brake. A first-piece check confirms dimensions; through the shift, you keep a steady eye on accuracy and throughput, making small adjustments as needed. You coordinate with teammates to keep parts flowing, perform light maintenance to prevent downtime, document your runs, and wrap up with a spotless, safe work area.LocationLavonia, GACore dutiesConfigure and operate press brake equipment per job specifications and work instructions.Interpret blueprints and technical drawings to determine tooling and bend sequences.Monitor cycles to maintain quality and efficiency; adjust settings to hold dimensions.Perfor

Blairsville, GA 30512-3525 • (44.6 miles) • Full Time • 10/12/2026

Description: SUMMARYThe CAD Drafter will support the Engineering team by operating Computer Aided Design (CAD) computer system, including creating, updating, and modifying structural designs and performing manual drafting.ESSENTIAL DUTIES AND RESPONSIBILITIES (other duties may be assigned)1. Create (and/or modify) CAD drawings for engineering projects.2. Create custom packages of engineering support for customers to include (but not limited to) approval drawings, fabrication and assembly drawings, material specifications, and bill of materials (BOM).3. Provide on-site Customer Service support as needed for hands-on engineering expertise.4. Provide detailed installation drawings and descriptions for non-engineering personnel as needed.5. Conduct required research for permit requirements as

Lavonia, GA 30553 • (42.6 miles) • Full Time • 10/9/2026

MP&L PlannerMinimum 3 years of Materials Production & Logistics planning experienceVenteon is currently seeking an experienced Material Planner to fill an opening with a Tier 1 Manufacturing Company located near Lavonia, GA. Must have experience with automotive materials analysis, ideally in a JIT environment