Cornelius, NC 28031 • (42 miles) • Full Time • 11/1/2026

Major Responsibilities: Demonstrates knowledge in various modes and methods of oxygen delivery and the equipment needed for each and can conduct prescribed therapeutic procedures to achieve adequate oxygenation. Administers therapeutic procedures, understanding the purpose and benefits, and possible effects associated with each. Performs diagnostic procedures as outlined in policy. Initiates, monitors and maintains mechanical ventilators and non-invasive ventilators and is aware of the critical care duties and effects of such therapy. Independently evaluates current therapies using appropriate judgment and protocols, making proper recommendations concerning plans of care and patient education needs. Documents therapy and results as required by hospital, department and regulatory agencies.

Gastonia, NC 28052 • (44.1 miles) • Full Time • 11/8/2026

Would you like to join an international team working to improve the future of healthcare? Do you want to enhance the lives of millions of people? Grifols is a global healthcare company that since 1909 has been working to improve the health and well-being of people around the world. We are leaders in plasma-derived medicines and transfusion medicine and develop, produce and market innovative medicines, solutions and services in more than 110 countries and regions. Center Medical Specialist Seeking EMTB, EMTA or Paramedic for Plasma Donation Center! NOTE: Salary is based on licensure and experience Are you looking for something different? Did you know that your skill set/experience makes you a valuable candidate for a Center Medical Specialist position in one of our plasma donation centers?

Mooresville, NC 28117 • (38.1 miles) • Full Time • 11/1/2026

Do your Best Work in Mooresville This position is based at our headquarters in Mooresville, North Carolina. Our corporate office is a space where you can collaborate and do your best work. Take a walk, grab a bite (or a cup of coffee), work out or get a check-up – we invest in you so you can find your inspiration. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at any time. What You Will Do The Principal Industrial Engineer is responsible for identifying, analyzing, securing resources and support, and developing solutions that will facilitate continuous productivity, capacity, safety, and quality improvement within Lowe's Supply Chain and Distribution teams. Within distribution, the Principal Industr

Gastonia, NC 28052 • (44.1 miles) • Full Time • $100,000 to $120,000 / yr • 10/27/2026

Join our team as the Lead Product Engineer and take full ownership of fluid filtration system product development. Reporting directly to the R&D Business Unit Manager, you will lead complex mechanical designs from concept through production release and set the engineering direction that drives product performance, manufacturability, and cost targets across multiple market segments. This role is ideal for a hands-on mechanical engineer with direct experience designing and developing fluid-handling or filtration system products who wants meaningful product ownership in a growing industrial R&D environment. You'll have the opportunity to help shape a newly established business unit, work across multiple industries, and make a direct impact on product innovation and manufacturing performance.

Hickory, NC • (11.7 miles) • Full Time • $28.00 to $32.00 / hr • 11/11/2026

The Machinist I is an experienced, self-sufficient craftsperson capable of independently setting up and running CNC and manual equipment with minimal supervision. This role takes ownership of complex jobs from print to finished part, holds tight tolerances, and serves as a technical resource for less experienced machinists on the floor. The ideal candidate is a skilled, self-directed tradesperson who works well in a small, fast-paced precision manufacturing team. This position reports to the Shop Foreman. Key Responsibilities Machining & Setup Set up and operate CNC mills, CNC lathes, and water jet equipment independently. Plan job sequencing and select tooling and fixturing for efficient, quality production. Complete setups from scratch without pre-built setups. Blueprint & Specification

Statesville, NC • (34.7 miles) • Full Time • 11/11/2026

TRP Construction Group, LLC with locations in Texas, North Carolina, Georgia, and Florida, is a rapidly growing striping company with career advancement opportunities. TRP is seeking Pavement Marking Field Associates to become part of our highway striping team, and to share our core values of increasing road safety of the traveling public and delivering the highest level of precision and excellence. TRP Construction Group, LLC will conduct Background Check, Motor Vehicle Record (MVR) and Controlled Substance testing prior to hire. At TRP, we see you. We hear you. We salute you. Your service has constructed qualities we valueleadership, discipline, accountability, teamwork, and resilience. We honor the strength and sacrifice of the families who’ve had your six every step of the way. Your ex

Mooresville, NC 28117 • (38.1 miles) • Part Time • 11/11/2026

Location: Mooresville, NC (In-Office at Lake Norman Campus) Term Availability: Open Immediately | Spring 2027 | Summer 2027 | Year-Round Co-op Schedule: Full-Time (Summer/Term Internships) or Flexible Part-Time (Co-ops concurrently with coursework) Work Authorization: U.S. Persons Only Corvid HPC is seeking an HPC/CAE Applications Engineer Intern / Co-op who is ready to skip traditional "toy projects" and gain real-world experience at the intersection of bare-metal supercomputing and computational physics. Designed for high-aptitude engineering students, this position offers real technical responsibility, 360-degree exposure across our entire business and engineering ecosystem, and a direct hiring pipeline toward a full-time position upon graduation ($85,000 – $135,000 OTE). What You Will

Mooresville, NC 28117 • (38.1 miles) • Full Time • 11/11/2026

What We're Looking For The ideal candidate will be: Detail-oriented with a strong commitment to quality. Able to solve problems and make sound decisions independently. Organized and capable of managing multiple priorities. A team player who communicates effectively across departments. Committed to continuous improvement and process efficiency. What You Will Do Develop and maintain CMM programs for first article, in-process, and final inspections. Program and operate Coordinate Measuring Machines (CMM). Interpret engineering drawings, blueprints, and GD&T requirements. Perform First Article Inspections (FAIs). Support Engineering and Quality by developing inspection methods and inspection documentation. Maintain CMM equipment, probe qualifications, and program libraries. Troubleshoot qualit

Mooresville, NC • (41.2 miles) • Full Time • 11/11/2026

Description: POSITION TITLE: Field Service Engineer III DIVISION: All REPORTS TO: Technical Services Manager DIRECT REPORTS: None LOCATION: JOB SUMMARY The Field Service Engineer III will be responsible for supporting our customers with installation of new and used machinery. He/she will be responsible for supporting any maintenance and repair after installation as well as support during trade shows as needed to support the development of our customer relationships. PRINCIPAL ACCOUNTABILITIES Installation of New & Used Machinery Start-up & commissioning of newly installed machinery. Troubleshoot electrical, hydraulic, pneumatic & mechanical systems, used to control modern machinery and associated equipment. Repair & maintenance on machinery and associated equipment. Demonstrate and teach o

Mooresville, NC • (41.2 miles) • Full Time • 11/11/2026

Job Opportunity: Mechanical / Mechatronics Engineer with Lamboo Medical in Mooresville, NC Iredell County, North Carolina Are you a hands-on Mechanical or Mechatronics Engineer with extensive experience working with electromechanical components and integrated systems? Do you enjoy solving complex engineering challenges, combining mechanical and electrical technologies, and seeing your designs come to life on the manufacturing floor? If so, we want to hear from you! Lamboo Medical is seeking an experienced Mechanical / Mechatronics Engineer to join our growing operations in Iredell County, North Carolina. Lamboo Medical specializes in the design, engineering, and manufacturing of advanced mobile medical imaging solutions, including MRI, CT, and PET/CT units, as well as specialized medical t

Mooresville, NC • (41.2 miles) • Full Time • 11/11/2026

Job Opportunity: Mechanical / Mechatronics Engineer with Lamboo Medical in Mooresville, NC Iredell County, North Carolina Are you a hands-on Mechanical or Mechatronics Engineer with extensive experience working with electromechanical components and integrated systems? Do you enjoy solving complex engineering challenges, combining mechanical and electrical technologies, and seeing your designs come to life on the manufacturing floor? If so, we want to hear from you! Lamboo Medical is seeking an experienced Mechanical / Mechatronics Engineer to join our growing operations in Iredell County, North Carolina. Lamboo Medical specializes in the design, engineering, and manufacturing of advanced mobile medical imaging solutions, including MRI, CT, and PET/CT units, as well as specialized medical t

Kings Mountain, NC 28086 • (42.2 miles) • Full Time • $100,000 to $115,000 / yr • 11/10/2026

JOB DESCRIPTION Responsible for ensuring that the facilities, layout and machinery used to produce new and existing materials and goods run to their maximum efficiency and output. This includes total preventative maintenance, managing breakdowns of mechanical, electrical and robotic equipment (including software programming). Includes people management and budgetary/cost reporting. Lead the site Maintenance function in providing both a reactive and pro-active, multi-skilled maintenance service on all operational equipment and facilities infrastructure. Responsible for planned scheduling creation and overseeing the adherence and timely completion of work carried out. Increase site operational effectiveness, improve on project delivery. Key Responsibilities: Strategy and Development · Contri

Shelby, NC • (38.6 miles) • Full Time • 11/10/2026

Aerospace Test Engineer Location: Shelby, NC Hire Type: Contract-to-Hire Schedule: Primarily onsite, five days per week initially Pay: $67–$69 per hour Citizenship: U.S. citizenship required due to ITAR regulations Position Summary Our client is seeking an Aerospace Test Engineer to support qualification testing for military aircraft door-drive and electromechanical actuation systems. Working under a Senior Test Engineer, this individual will support a high-volume program involving approximately 700 part numbers. Designs are complete and moving through procurement, so the immediate focus will be updating test documentation, obtaining quotations, coordinating outside laboratory testing, and supporting qualification-test readiness. Responsibilities Create, review, and update qualification te

Claremont, NC 28610 • (21.1 miles) • Full Time • $125,000 to $135,000 / yr • 11/10/2026

**Job Overview: ** Candidate will be an employee of the Automation group supporting the manufacturing of optical fiber. This individual will provide technical support in the area of PC and PLC based controls and automation for improvement projects and production support. Requirements: Bachelor’s degree in Engineering, Computer Science, or a related technical field preferred, or equivalent combination of education and relevant experience. Experience with programming Rockwell (Allen-Bradley), Schneider, and/or Siemens PLC’s Excellent technical problem-solving skills Ability to contribute to the plant’s culture of continuous improvement Excellent communication skills Detail and quality oriented Ability to work with little supervision Preferred: Experience in fiber optic or other highly automa

Mooresville, NC 28117 • (38.1 miles) • Full Time • 11/10/2026

Position Overview The Mechanical Design Engineer's responsibilities include but are not limited to; review project design requirements, provide input for potential additional requirements, develop, and execute the design of ideas for the product, review and justify designs during preliminary and critical project design reviews. The Design Engineer will create CAD models using MSI's parametric skeleton strategy, fully defining the bill of materials of the system. The Design Engineer will also manage the development of the drawing package used to convey the system requirement to the production team. The Design Engineer will ensure designs meet the goals and requirements outlined for the project and will report the design's status to the Project Manager to ensure it remains in line with the m

Mooresville, NC 28117 • (38.1 miles) • Full Time • $30.00 to $40.00 / hr • 11/9/2026

About the Role We’re seeking a skilled CMM Programmer to join our Quality Assurance team and play a key role in ensuring the precision and reliability of our medical implant products. In this position, you will program and operate Hexagon Metrology CMMs using PC-DMIS to verify critical dimensions on high-precision components. Your expertise will help maintain full compliance with FDA and ISO 13485 standards and support the safety and performance of products that improve patient lives. Available Shifts 1st Shift: 4x10 schedule 2nd Shift: 4x10 schedule Weekend Shift: Friday–Sunday, 5:45 AM–6:30 PM What You’ll Do Develop, optimize, and run CMM inspection programs for medical implants and precision components. Interpret complex engineering drawings, GD&T , and 3D CAD models to build accurate i

Mooresville, NC 28117 • (38.1 miles) • Full Time • 11/8/2026

Description: COMPANY OVERVIEW Artisan Design Group (ADG), a Lowe's company, is a leading national provider of interior finishings solutions for homebuilders and property management clients. ADG delivers end to end design, procurement, and installation services for flooring, cabinets, countertops, and a growing portfolio of interior products. Founded in 2016, ADG has grown by uniting respected regional operators across the country. Following its 2025 acquisition by Lowe's Companies, Inc., the company continues to operate as ADG while benefiting from the scale, resources, and brand strength of one of the most trusted names in home improvement. Together, they are expanding their capabilities in a highly fragmented market while remaining committed to craftsmanship, service, and local expertise

Mooresville, NC • (41.2 miles) • Full Time • $70,000 to $90,000 / yr • 11/8/2026

CNC PROGRAMMER / DESIGN ENGINEER Specialty well regarded manufacturer near Mooresville has new and immediate need for 3-5 axis Mill Programmer who has DESIGN ENGINEERING skills as well. CNC Router and Laser experience helpful. Experience with steel, aluminum, composites , High Temp alloys etc a plus. resume to CAD/CAM RECRUITERS CHARLOTTE Search and recruitment for cnc and Manufacturing professionals since 1981 Also. CAD/CAM RECRUITERS has new need for CMM specialist, PC DMAS a plus but Zeiss or mitutoyo OK \nCompany Description Search and Recruitment for Direct/Permanent CAM and CNC Professionals since 1981 Company Description Search and Recruitment for Direct/Permanent CAM and CNC Professionals since 1981

Gastonia, NC • (44.7 miles) • Full Time • $90,199 to $110,109 / yr • 11/8/2026

Who are we looking for? We are seeking an experienced, hands-on Manufacturing Systems Improvement Engineer to improve the safety, reliability, throughput, maintainability, and operational consistency of medical waste treatment facilities across the United States. This is a field-oriented engineering role. The successful candidate will spend more than 50% of their working time in operating facilities, partnering directly with operations and maintenance personnel to understand equipment limitations, identify improvement opportunities, develop practical solutions, and verify results after implementation. The ideal candidate combines mechanical design, industrial equipment knowledge, process improvement, electrical and controls awareness, and strong project-execution skills. They are comfortab

Mooresville, NC 28117 • (38.1 miles) • Full Time • 11/7/2026

The Controls Engineer is responsible for the design, development, programming, and implementation of automation and control systems for industrial and municipal wastewater treatment systems. This role partners closely with Applications Engineering and Process Engineering to ensure engineered solutions are effectively automated, integrated, tested, and commissioned. The Controls Engineer provides technical expertise throughout the project lifecyclefrom proposal support through system startupensuring control systems operate safely, reliably, and in accordance with customer specifications. Design PLC and HMI control systems for wastewater treatment equipment and integrated process systems. Develop control philosophies, functional descriptions, and automation sequences. Create electrical and c

Mooresville, NC 28117 • (38.1 miles) • Full Time • 11/7/2026

Corvid's Aerodynamics team works closely with customers applying Computational Fluid Dynamics toanalyze design concepts and modifications for aerospace and similar weapon systems. Our team usesCorvid developed computational tools and in-house high-performance computing environment to providedetailed insights into systems and concepts. The team analyzes flight vehicles across all Mach regimes,evaluating overall aerodynamics and the impact of propulsion systems on vehicle dynamics andcontrollability. The team is looking to add an engineer to support defense-related programs, specifically applying CFD solutions to aerodynamic development for relevant systems. Candidates will work with multidisciplinary teams to bring creative technical solutions for mission critical systems. In addition to ac

Wilmington, NC 28658 • (20 miles) • Full Time • $85,000 to $105,000 / yr • 11/7/2026

Job Title: Controls Engineer Job Description The Controls Engineer plays a key role in a fast-paced manufacturing environment, focusing on industrial automation, equipment reliability, and continuous improvement. This position combines hands-on work on the production floor with project engineering responsibilities to optimize control systems, enhance productivity, and support advanced technologies such as robotics, AGVs, vision systems, motion control, and Industry 4.0 solutions. The role requires strong analytical and problem-solving skills, effective communication, and a proactive, solutions-oriented mindset dedicated to improving safety, quality, and efficiency. Responsibilities Evaluate control systems, products, components, and applications to ensure optimal performance, reliability,

Laboratory, NC • (31.2 miles) • Full Time • $50,000 to $70,000 / yr • 11/7/2026

ERG is a research and consulting firm that provides a wide range of support to federal, state, and commercial clients. ERG offers multidisciplinary teams with nationally recognized skills in engineering, science, economics, public health, informational technology, and communications. We hire people with the best minds and then provide them with a vibrant and flexible environment in which to develop their careers. The qualified individual must be highly motivated with the skills to prioritize, perform, and communicate effectively in a fast-paced environment. ERG is seeking early-career scientists and engineers to support a diverse portfolio of laboratory, field, and applied research projects for the U.S. EPA. The successful candidate will have opportunities to contribute to aerobiology and

Mooresville, NC • (41.2 miles) • Full Time • 11/7/2026

CNC Machinist & Programmer Low Volume / High Mix Precision Manufacturing Position Overview We are looking for an experienced CNC Machinist & Programmer to support the production of precision components used in automated assembly, screwdriving, and feeding systems. This is a hands-on role where you'll be responsible for programming, setting up, and operating CNC lathes and mills while working in a low-volume, high-mix environment. This position is ideal for someone who enjoys variety, takes ownership of their work, and can independently take a part from print to finished product. What You'll Be Doing Program, set up, and operate CNC lathes and CNC mills. Perform conversational programming and machine-side edits as needed. Manufacture low-volume custom components, typically in quantities of

Maiden, NC 28650 • (26.5 miles) • Full Time • 11/6/2026

Holland Pump Company Job Summary Holland Pump Company is seeking a highly skilled and innovative Application Engineer to support the continued growth of our engineering, operational, and technical capabilities. This position will be responsible for developing, integrating, and maintaining applications and engineering solutions that support Holland Pump’s pump rental, dewatering, water treatment, fabrication, equipment design, and field operations. The Application Engineer will work closely with Engineered Solutions, Operations, Service, Sales, IT, and other cross-functional teams to develop practical technology solutions that improve equipment design, system performance, workflow efficiency, data visibility, and overall productivity. The ideal candidate combines application development exp

Denver, NC 28037 • (35.3 miles) • Full Time • 11/6/2026

We are committed to providing a stable, growth-oriented and inspiring work environment that offers opportunities for professional, personal and financial growth. If you are interested in joining a growing team, where YOU are our most valuable asset, then Mountain Air Cargo, Inc. is the place for you. WASI PROFESSIONAL EXPECTATION STATEMENT: In the performance of your respective tasks and duties all employees are expected to confirm to the following: Perform quality work within deadlines with or without direct supervision. Interact professionally with other employees, customers and suppliers. Work effectively as a team contributor on all assignments. Work independently while understanding the necessity for communicating and coordinating work efforts with other employees and service agencies

Hickory, NC 28602 • (13.2 miles) • Full Time • $19.50 / hr • 11/6/2026

Join a Growing Team in the Construction & Engineering Industry Catawba Valley Engineering & Testing is looking for motivated, detail-oriented individual to join our team as an Engineering Field Technician . This is an excellent opportunity for anyone interested in construction, engineering, quality assurance, or gaining hands-on experience with real-world, high-impact projects across the region. What You’ll Do As an Engineering Field Technician, you will play a key role in ensuring construction quality and compliance on active job sites. Your responsibilities will include: Performing field testing, sampling, observations, and inspections of construction materials Conducting Construction Materials Testing (CMT) on concrete, soils, masonry, asphalt, aggregate, structural steel, fireproofing,

Statesville, NC 28677 • (32.5 miles) • Full Time • 11/5/2026

Description: The Assistant Director of Engineering supports the Director of Engineering in leading the daily operation, maintenance, reliability, safety, and regulatory readiness of the organization’s facilities, utilities, equipment, and building systems (i.e., HVAC, electrical, mechanical, plumbing, etc). This role assists with planning, staffing, budgeting, preventive maintenance, project coordination, vendor management, and compliance activities to ensure the physical environment supports safe, efficient, and uninterrupted operations (utility and life safety management). Reports to the Director of Engineering. Provides direction and support to maintenance, plant operations, and contracted service personnel as assigned. Facility & Operations Oversight: Assist in directing day-to-day ope

Mooresville, NC 28117 • (38.1 miles) • Full Time • 11/5/2026

We are seeking a detail-oriented Non-Destructive Testing (NDT) Technician to support the inspection of high-performance racing engine components. You'll work hands-on with parts that have competed at the highest levels of motorsports, helping identify wear, defects, and opportunities to improve reliability and performance. This is an excellent opportunity for individuals with a mechanical aptitude and a strong attention to detail. Responsibilities Perform post-race inspection of racing engine components using visual, liquid penetrant, and magnetic particle inspection methods under the guidance of certified personnel. Accurately document inspection findings and maintain detailed records. Identify and communicate potential issues requiring further review. Use basic math to calculate inspecti

Conover, NC • (17.6 miles) • Full Time • $18.00 to $26.00 / hr • 11/5/2026

Description The Field Technician Level 1 supports experienced field crews in the safe setup, maintenance, and operation of tapping and line-stopping equipment while learning Rangeline’s systems and standards. This role is ideal for individuals who bring a strong work ethic, mechanical aptitude, and a willingness to learn in a physically demanding environment. Experience in underground utilities or construction is strongly preferred. Key Responsibilities • Assist with the installation, repair, and maintenance of water main systems • Support setup and teardown of tapping, line-stop, and valve insertion equipment • Clean and maintain tools, trucks, and work areas • Load and unload materials and equipment • Follow instructions from senior technicians and job leads on site • Participate in pre-

Statesville, NC • (34.7 miles) • Full Time • $95,000 to $115,000 / yr • 11/5/2026

Key Responsibilities Direct the construction, operation, maintenance, and testing of electrical substations , ensuring compliance with RUS requirements and manufacturer standards. Oversee substation engineering plans, equipment specifications, project documentation, and procurement activities. Manage inventory of transmission and substation materials to support ongoing utility operations. Support regional operations with testing and repair of distribution equipment, including circuit regulators and reclosers. Oversee utility communication infrastructure, including two-way radio, microwave, and packet radio systems. Coordinate the development of substation plans, preparation of bid documents, and procurement of new substation sites. Lead and coordinate power restoration efforts involving su

Wilmington, NC 28658 • (20 miles) • Full Time • 11/4/2026

Position Overview: The Sales Application Engineer (SAE) will play a crucial role in assisting the departments by refining the scope of work for ETO products and serving as a subject matter expert for relevant products. This position plays a crucial role in ensuring that technical products and solutions are effectively tailored to meet the specific needs of customers, ultimately driving sales and customer satisfaction. The Sales Application Engineer also collects voice of the customer feedback, leads and participates in customer presentations, and provides some technical support. The Sales Application Engineer combines technical knowledge with sales skills to provide solutions to customers’ needs. This position is instrumental in bridging the gap between the sales team and the Cart Segment,

Wilkesboro, NC 28697 • (26.9 miles) • Full Time • 11/4/2026

Why Guide Star? Guide Star is a managed services provider specializing in IT technical and end user support, monitoring, managed wireless solutions and security for medium to large size businesses, MDU, and hospitality organizations across the US and Canada. We are a division of CCI Systems, Inc., which is an Employee-Owned solution provider specializing in telecommunications, comprehensive network assessments, industry-leading engineering, drafting and design services, and 24/7 support services. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communica

Lowesville, NC • (40.3 miles) • Full Time • 11/4/2026

Overview Recognized by Clarivate, Forbes, the Human Rights Campaign, and Military Friendly® for innovation, workplace excellence, inclusion, and veteran support. A global building automation and industrial technology company with 100+ years of history , 25,000+ patents , and 7,000+ engineers , operating across 70+ countries and 4 major business areas . Its technologies support industries including buildings, manufacturing, healthcare, data centers, and utilities worldwide. Benefits 401(k) match: Employer matches 87.5% of the first 8% of eligible pay, up to 7% of base salary; generally fully vested after 3 years. Education support: Up to $5,250/year for eligible undergraduate programs and $7,500/year for graduate programs. Paid parental leave: 8 weeks (40 business days) for birth, adoption,

Mooresville, NC 28115 • (44 miles) • Full Time • $70,000 to $105,000 / yr • 11/4/2026

The Career: Are you passionate about innovation, quality, and making a difference? If so, great news - QA1 is looking for a talented Design Engineerto join our Lakeville, MN or Mooresville, NC based team. This role offers the opportunity to work on cutting-edge products that not only meet but exceed industry expectations. As a member of the QA1 team, you’ll be responsible for product design and specifications, including but not limited to general motion control, dampers, automative chassis, suspension, steering driveline, body, and electromechanical systems. Our ideal candidate is detail-oriented, mechanically inclined, and brings hands-on experience in 3D modeling and product designpreferably within the automotive industry. A strong foundation in engineering principles, a passion for auto

Statesville, NC 28625 • (33.6 miles) • Full Time • 11/4/2026

Description: GENERAL SUMMARY OF DUTIES: Promote an innovative, forward thinking culture to develop, implement and monitor a strategic, comprehensive enterprise cyber security program. Responsible for cyber incident response, monitoring, threat assessment/mitigation, cyber systems architecture design and implementation while advancing enterprise cyber security capabilities. SUPERVISION RECEIVED: Reports to the Cybersecurity Manager SUPERVISION EXERCISED: None ESSENTIAL FUNCTIONS: Understand technology disciplines which include but are not limited to, endpoint security, data loss protection, firewalls, intrusion detection and intrusion prevention, application and system scanning tools, log collection and monitoring Responds to and investigates all security alerts from configured alert system

Dallas, NC 28034 • (38.2 miles) • Full Time • 11/4/2026

Manufacturing Engineering Manager Location: 2925 Chief Court, Dallas, NC 28034 Work Hours: 8:00 AM - 5:00 PM, Monday through Friday Competitive Compensation + Bonus Eligibility! Make the Right ConnectionBuild Your Career with Dixon! The Dixon Group is looking for a Manufacturing Engineering Manager to join our team! In this role, you will oversee a dedicated team of engineers and technicians, driving the design, development, and implementation of advanced manufacturing processes and technologies. You will play a pivotal role in ensuring our projects meet strict safety, quality, and productivity standards while staying on schedule and within budget. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation’s heroes. Veterans are strongly encourage

Mooresville, NC 28115 • (44 miles) • Full Time • $21.00 to $24.00 / hr • 11/4/2026

Why build your CNC career at MacLean-Fogg? Impact: Your setups and programming tweaks keep our customers supplied with high-tolerance parts. Growth: Mentor newer operators while sharpening your own troubleshooting and process-improvement skills. Stability: A century-old, family-owned manufacturer with comprehensive benefits and modern equipment. The role We’re hiring a CNC Production Specialist at our on-site Mooresville, NC facility. In this hands-on position, you’ll set up and operate CNC and related mechanical equipment, interpret blueprints and specs, verify quality with proper gaging, and document production accurately. When machine performance dips, you’ll diagnose root causes, adjust tooling/offsets or code, and restore precision and throughputwhile modeling safe, clean, 5S-aligned

Gastonia, NC • (44.7 miles) • Full Time • $75,000 to $94,998 / yr • 11/4/2026

Packaging Process Engineer Job Description | Stabilus USA | Gastonia, NC | 13 August 2026 Job Summary The Packaging Process Engineer position is based at our U.S. Corporate Headquarters in Gastonia, NC. Under the direction of USPP, this role is responsible for specifying, coordinating, and managing packaging solutions working closely with suppliers, customers, and internal teams to achieve cost, delivery, quality, and safety performance metrics per company and customer standards. The role provides leadership in improving packaging processes and evaluation methods, adopting new technologies to meet business needs, and developing best practices. It also provides technical and operational leadership in supporting new products, packaging improvements, and cost reduction initiatives. Essential

Boone, NC 28607 • (26.9 miles) • Full Time • $1,200 / wk • 11/3/2026

Job Description: Travel throughout the USA using the latest technologies and industry methods to provide large transportation agencies with highway asset management systems, surveys and data that optimize maintenance and development and ensure the safety of all stakeholders. Our advanced pavement data-collection vehicles are equipped with precision survey systems and software and can perform any roadway data collection task. The modular design allows the vehicles to be easily reconfigured to meet your requirements and serves to cut excess, equipping the vehicles with the necessary surveying systems. As the vehicle ages, the subsystems can be integrated onto another chassis, and our customizable software can be updated to suit changing needs, making them an invaluable long-term investment.

Marion, NC 28752 • (32.2 miles) • Full Time • 11/3/2026

Job Title: Manufacturing Engineering Trainee Location: Simpsonville, SC; Greenville, SC; Belton, SC; Rogersville, TN; Asheville, NC; Marion, NC; Kansas City, MO Reports to: Engineering Manager Employment Type: Full Time Industry: Manufacturing | Mechanical Power Transmission Components | Engineering Services Job Function: Engineering | Process Improvement Job Summary: The Manufacturing Engineering Trainee (MET) is an entry-level manufacturing engineering position tailored for high-potential future leaders of Dodge® Industrial. This program will follow a formal and structured rotational training and development program for 1-2 years. This role will include: Assigned daily mentorship from a technical and non-technical senior leader. Pre-assigned critical hands-on manufacturing projects that