Elkin, NC 28621 • (6.9 miles) • Full Time • 11/1/2026

POSITION HIGHLIGHTS: Location: Hugh Chatham Memorial Hospital Essential Functions Demonstrates knowledge in various modes and methods of oxygen delivery and the equipment needed for each and can conduct prescribed therapeutic procedures to achieve adequate oxygenation. Administers therapeutic procedures, understanding the purpose and benefits, and possible effects associated with each. Performs diagnostic procedures as outlined in policy. Initiates, monitors and maintains mechanical ventilators and non-invasive ventilators and is aware of the critical care duties and effects of such therapy. Independently evaluates current therapies using appropriate judgment and protocols, making proper recommendations concerning plans of care and patient education needs. Documents therapy and results as

Sparta, NC 28675 • (22.4 miles) • Full Time • 11/1/2026

POSITION HIGHLIGHTS: Location: Alleghany Memorial Hospital, Sparta, NC Shift Schedule: Full Time, Nights YOU’LL NEED: Graduate of an AMA approved two or four-year program for respiratory care or satisfies the requirements as outlined in the admissions policies of the NBRC for registry examinations. Registered Respiratory Therapist (RRT) by the National Board of Respiratory Care (NBRC) and licensed to practice as a RCP in the state of North Carolina required. Basic Life Support (BLS) required. Peds: PALS and NRP required within 90 days of employment. Adult: ACLS required within 90 days of employment. ESSENTIAL FUNCTIONS: Adheres to the general hospital standards to promote a cooperative work environment by utilizing communication skills, interpersonal relationships and team building.

Mooresville, NC 28117 • (44.8 miles) • Full Time • 11/1/2026

Do your Best Work in Mooresville This position is based at our headquarters in Mooresville, North Carolina. Our corporate office is a space where you can collaborate and do your best work. Take a walk, grab a bite (or a cup of coffee), work out or get a check-up – we invest in you so you can find your inspiration. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at any time. What You Will Do The Principal Industrial Engineer is responsible for identifying, analyzing, securing resources and support, and developing solutions that will facilitate continuous productivity, capacity, safety, and quality improvement within Lowe's Supply Chain and Distribution teams. Within distribution, the Principal Industr

East Bend, NC 27018 • (23.3 miles) • Full Time • 10/18/2026

Logistics at full potential. At GXO, we’re constantly looking for talented individuals at all levels who can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you’ll have the support to excel at work and the resources to build a career you can be proud of. 1st Shift, Monday-Friday, 8:00 AM - 5:00 PM. Must be willing and able to work all shifts as needed in a 24/7 operational environment. We’re always on the lookout for leaders like you who will provide guidance and education, while ensuring organizational policies and procedures are followed. As the Quality Supervisor, you will establish, implement and maintain the processes for the Quality Manageme

Claremont, NC 28610 • (35.6 miles) • Full Time • $125,000 to $135,000 / yr • 11/10/2026

**Job Overview: ** Candidate will be an employee of the Automation group supporting the manufacturing of optical fiber. This individual will provide technical support in the area of PC and PLC based controls and automation for improvement projects and production support. Requirements: Bachelor’s degree in Engineering, Computer Science, or a related technical field preferred, or equivalent combination of education and relevant experience. Experience with programming Rockwell (Allen-Bradley), Schneider, and/or Siemens PLC’s Excellent technical problem-solving skills Ability to contribute to the plant’s culture of continuous improvement Excellent communication skills Detail and quality oriented Ability to work with little supervision Preferred: Experience in fiber optic or other highly automa

Winston-Salem, NC 27105 • (39.7 miles) • Full Time • $25.00 to $45.00 / hr • 11/10/2026

MGX Field Crane Technicians are responsible for the inspection, diagnosis, repair, and maintenance of various crane equipment including mobile cranes and boom trucks. This position will be located at the Winston Salem, NC branch for MGX Equipment Services and reports to the Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year. Relocation assistance may also be available to those who qualify. This position offers a pay range between $25.00 - $45.00 per hour. **ESSENTIAL JOB FUNCTIONS: ** Light diagnosis, repair and troubleshooting of various mobile hydraulic and lattice cranes. Capable of accomplishing tasks independently without dir

Mooresville, NC 28117 • (44.8 miles) • Full Time • 11/10/2026

Position Overview The Mechanical Design Engineer's responsibilities include but are not limited to; review project design requirements, provide input for potential additional requirements, develop, and execute the design of ideas for the product, review and justify designs during preliminary and critical project design reviews. The Design Engineer will create CAD models using MSI's parametric skeleton strategy, fully defining the bill of materials of the system. The Design Engineer will also manage the development of the drawing package used to convey the system requirement to the production team. The Design Engineer will ensure designs meet the goals and requirements outlined for the project and will report the design's status to the Project Manager to ensure it remains in line with the m

Wilkesboro, NC • (13.9 miles) • Full Time • 11/9/2026

Join Toshiba America Business Solutions as a Field Service Technician II in Hickory, NC. You’ll work with industry-leading office technology while supporting customers throughout your assigned territory. From troubleshooting and repairs to installations and upgrades, you’ll play a key role in keeping multifunction printers, copiers, and Managed Print Services (MPS) environments running at their best. Every day brings new opportunities to solve technical challenges, support customers and keep business-critical technology running smoothly. If you enjoy hands-on work, continuous learning, and working directly with customers, you’ll have the opportunity to build your expertise across industry-leading office technology. What you’ll do Maintain, service, and repair printers, copiers, and other o

Winston-Salem, NC 27101 • (42.2 miles) • Full Time • $70.00 to $100.00 / hr • 11/9/2026

Field Service Technician Location: Charlotte, Winston-Salem, NC Travel: Up to 60% Pay: Competitive Salary (to be determined based on experience) Competitive compensation DOE (typically $34-37/hour; $80,000-100,000K annual with OT) About the Field Service Technician role: ProSearch Recruiting Partners, an independent franchise of the MRI Network specializing in factory automation career recruitment and hires heavily in the machine tool industry, is seeking a highly motivated Field Service Technicians to join a well-established machine tool companies with over 60 years of experience. As a Field Service Technician, you will play a crucial role in ensuring the smooth operation of our customers' machinery, specifically focusing on CNC lathes, robotic systems, and custom engineered solutions. Yo

Mooresville, NC 28117 • (44.8 miles) • Full Time • $30.00 to $40.00 / hr • 11/9/2026

About the Role We’re seeking a skilled CMM Programmer to join our Quality Assurance team and play a key role in ensuring the precision and reliability of our medical implant products. In this position, you will program and operate Hexagon Metrology CMMs using PC-DMIS to verify critical dimensions on high-precision components. Your expertise will help maintain full compliance with FDA and ISO 13485 standards and support the safety and performance of products that improve patient lives. Available Shifts 1st Shift: 4x10 schedule 2nd Shift: 4x10 schedule Weekend Shift: Friday–Sunday, 5:45 AM–6:30 PM What You’ll Do Develop, optimize, and run CMM inspection programs for medical implants and precision components. Interpret complex engineering drawings, GD&T , and 3D CAD models to build accurate i

Mooresville, NC • (44.5 miles) • Full Time • $70,000 to $90,000 / yr • 11/8/2026

CNC PROGRAMMER / DESIGN ENGINEER Specialty well regarded manufacturer near Mooresville has new and immediate need for 3-5 axis Mill Programmer who has DESIGN ENGINEERING skills as well. CNC Router and Laser experience helpful. Experience with steel, aluminum, composites , High Temp alloys etc a plus. resume to CAD/CAM RECRUITERS CHARLOTTE Search and recruitment for cnc and Manufacturing professionals since 1981 Also. CAD/CAM RECRUITERS has new need for CMM specialist, PC DMAS a plus but Zeiss or mitutoyo OK \nCompany Description Search and Recruitment for Direct/Permanent CAM and CNC Professionals since 1981 Company Description Search and Recruitment for Direct/Permanent CAM and CNC Professionals since 1981

Mooresville, NC 28117 • (44.8 miles) • Full Time • 11/8/2026

Description: COMPANY OVERVIEW Artisan Design Group (ADG), a Lowe's company, is a leading national provider of interior finishings solutions for homebuilders and property management clients. ADG delivers end to end design, procurement, and installation services for flooring, cabinets, countertops, and a growing portfolio of interior products. Founded in 2016, ADG has grown by uniting respected regional operators across the country. Following its 2025 acquisition by Lowe's Companies, Inc., the company continues to operate as ADG while benefiting from the scale, resources, and brand strength of one of the most trusted names in home improvement. Together, they are expanding their capabilities in a highly fragmented market while remaining committed to craftsmanship, service, and local expertise

Mooresville, NC 28117 • (44.8 miles) • Full Time • 11/7/2026

The Controls Engineer is responsible for the design, development, programming, and implementation of automation and control systems for industrial and municipal wastewater treatment systems. This role partners closely with Applications Engineering and Process Engineering to ensure engineered solutions are effectively automated, integrated, tested, and commissioned. The Controls Engineer provides technical expertise throughout the project lifecyclefrom proposal support through system startupensuring control systems operate safely, reliably, and in accordance with customer specifications. Design PLC and HMI control systems for wastewater treatment equipment and integrated process systems. Develop control philosophies, functional descriptions, and automation sequences. Create electrical and c

Mooresville, NC 28117 • (44.8 miles) • Full Time • 11/7/2026

Corvid's Aerodynamics team works closely with customers applying Computational Fluid Dynamics toanalyze design concepts and modifications for aerospace and similar weapon systems. Our team usesCorvid developed computational tools and in-house high-performance computing environment to providedetailed insights into systems and concepts. The team analyzes flight vehicles across all Mach regimes,evaluating overall aerodynamics and the impact of propulsion systems on vehicle dynamics andcontrollability. The team is looking to add an engineer to support defense-related programs, specifically applying CFD solutions to aerodynamic development for relevant systems. Candidates will work with multidisciplinary teams to bring creative technical solutions for mission critical systems. In addition to ac

Mocksville, NC 27028 • (29.1 miles) • Full Time • 11/7/2026

Company Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Performs a variety of water and sewer infrastru

Wilmington, NC 28658 • (43.8 miles) • Full Time • $85,000 to $105,000 / yr • 11/7/2026

Job Title: Controls Engineer Job Description The Controls Engineer plays a key role in a fast-paced manufacturing environment, focusing on industrial automation, equipment reliability, and continuous improvement. This position combines hands-on work on the production floor with project engineering responsibilities to optimize control systems, enhance productivity, and support advanced technologies such as robotics, AGVs, vision systems, motion control, and Industry 4.0 solutions. The role requires strong analytical and problem-solving skills, effective communication, and a proactive, solutions-oriented mindset dedicated to improving safety, quality, and efficiency. Responsibilities Evaluate control systems, products, components, and applications to ensure optimal performance, reliability,

Mooresville, NC • (44.5 miles) • Full Time • 11/7/2026

CNC Machinist & Programmer Low Volume / High Mix Precision Manufacturing Position Overview We are looking for an experienced CNC Machinist & Programmer to support the production of precision components used in automated assembly, screwdriving, and feeding systems. This is a hands-on role where you'll be responsible for programming, setting up, and operating CNC lathes and mills while working in a low-volume, high-mix environment. This position is ideal for someone who enjoys variety, takes ownership of their work, and can independently take a part from print to finished product. What You'll Be Doing Program, set up, and operate CNC lathes and CNC mills. Perform conversational programming and machine-side edits as needed. Manufacture low-volume custom components, typically in quantities of

North Wilkesboro, NC 28659 • (8.5 miles) • Full Time • 11/5/2026

Senior Engineer- Mechanical/Electrical About Stratus Stratus® is an integrated, multi-disciplinary engineering, architecture, interior design, and consulting firm. Consistently ranking among the Top 500 Design Firms in Engineering News-Record, the firm offers a deep bench of industry experts through a highly collaborative approach, delivering innovative solutions across the full project lifecycle. Operating coast to coast, Stratus® serves clients nationwide while maintaining a strategic commitment to supporting high-growth economies and building vibrant communities that foster the professional growth of its team. Serving public- and private-sector clients, the firm is dedicated to delivering the highest-quality service wherever projects take shape. Across the Civic, Commercial, Industrial,

Statesville, NC 28677 • (33.5 miles) • Full Time • 11/5/2026

Description: The Assistant Director of Engineering supports the Director of Engineering in leading the daily operation, maintenance, reliability, safety, and regulatory readiness of the organization’s facilities, utilities, equipment, and building systems (i.e., HVAC, electrical, mechanical, plumbing, etc). This role assists with planning, staffing, budgeting, preventive maintenance, project coordination, vendor management, and compliance activities to ensure the physical environment supports safe, efficient, and uninterrupted operations (utility and life safety management). Reports to the Director of Engineering. Provides direction and support to maintenance, plant operations, and contracted service personnel as assigned. Facility & Operations Oversight: Assist in directing day-to-day ope

Mooresville, NC 28117 • (44.8 miles) • Full Time • 11/5/2026

We are seeking a detail-oriented Non-Destructive Testing (NDT) Technician to support the inspection of high-performance racing engine components. You'll work hands-on with parts that have competed at the highest levels of motorsports, helping identify wear, defects, and opportunities to improve reliability and performance. This is an excellent opportunity for individuals with a mechanical aptitude and a strong attention to detail. Responsibilities Perform post-race inspection of racing engine components using visual, liquid penetrant, and magnetic particle inspection methods under the guidance of certified personnel. Accurately document inspection findings and maintain detailed records. Identify and communicate potential issues requiring further review. Use basic math to calculate inspecti

Statesville, NC • (30.5 miles) • Full Time • $95,000 to $115,000 / yr • 11/5/2026

Key Responsibilities Lead the planning, implementation, and ongoing support of GIS, AMI, and Grid Modernization programs. Develop and implement strategies to improve electric distribution system reliability, operational efficiency, and service performance. Lead, mentor, and develop GIS and AMI technical teams, including performance management and professional development. Analyze system reliability metrics, outage data, voltage fluctuations, and AMI data to identify improvement opportunities. Oversee Distribution Automation systems and Advanced Metering Infrastructure operations. Conduct and review engineering studies, including reliability analysis, sectionalizing studies, grid modernization planning, and infrastructure assessments. Support the development of Four-Year Construction Work P

Rural Hall, NC 27045 • (36.1 miles) • Full Time • 11/5/2026

Description: International Drilling Equipment (IDE) is an OEM dealer of Foundation Drilling Equipment and accessories, looking for a Field Service Technician to join our team. IDE’s territory includes locations within the United States and Canada. Job Description: Be responsible for the safe and effective repair of machine components in the shop and field, at high levels of quality. This individual must work independently of direct supervision in a field environment. The individual in this position should be personable, a problem solver, reliable, ethical, and able to adapt to all the challenges around them - customers, suppliers, colleagues, manufacturers, weather, and other conditions. Role and Responsibilities will include but are not limited to: Must be fully committed to working safel

Conover, NC • (38.2 miles) • Full Time • $18.00 to $26.00 / hr • 11/5/2026

Description The Field Technician Level 1 supports experienced field crews in the safe setup, maintenance, and operation of tapping and line-stopping equipment while learning Rangeline’s systems and standards. This role is ideal for individuals who bring a strong work ethic, mechanical aptitude, and a willingness to learn in a physically demanding environment. Experience in underground utilities or construction is strongly preferred. Key Responsibilities • Assist with the installation, repair, and maintenance of water main systems • Support setup and teardown of tapping, line-stop, and valve insertion equipment • Clean and maintain tools, trucks, and work areas • Load and unload materials and equipment • Follow instructions from senior technicians and job leads on site • Participate in pre-

Wilkesboro, NC 28697 • (13.6 miles) • Full Time • 11/4/2026

Why Guide Star? Guide Star is a managed services provider specializing in IT technical and end user support, monitoring, managed wireless solutions and security for medium to large size businesses, MDU, and hospitality organizations across the US and Canada. We are a division of CCI Systems, Inc., which is an Employee-Owned solution provider specializing in telecommunications, comprehensive network assessments, industry-leading engineering, drafting and design services, and 24/7 support services. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communica

Wilmington, NC 28658 • (43.8 miles) • Full Time • 11/4/2026

Position Overview: The Sales Application Engineer (SAE) will play a crucial role in assisting the departments by refining the scope of work for ETO products and serving as a subject matter expert for relevant products. This position plays a crucial role in ensuring that technical products and solutions are effectively tailored to meet the specific needs of customers, ultimately driving sales and customer satisfaction. The Sales Application Engineer also collects voice of the customer feedback, leads and participates in customer presentations, and provides some technical support. The Sales Application Engineer combines technical knowledge with sales skills to provide solutions to customers’ needs. This position is instrumental in bridging the gap between the sales team and the Cart Segment,

Statesville, NC 28625 • (24.9 miles) • Full Time • 11/4/2026

Description: GENERAL SUMMARY OF DUTIES: Promote an innovative, forward thinking culture to develop, implement and monitor a strategic, comprehensive enterprise cyber security program. Responsible for cyber incident response, monitoring, threat assessment/mitigation, cyber systems architecture design and implementation while advancing enterprise cyber security capabilities. SUPERVISION RECEIVED: Reports to the Cybersecurity Manager SUPERVISION EXERCISED: None ESSENTIAL FUNCTIONS: Understand technology disciplines which include but are not limited to, endpoint security, data loss protection, firewalls, intrusion detection and intrusion prevention, application and system scanning tools, log collection and monitoring Responds to and investigates all security alerts from configured alert system

Winston-Salem, NC 27101 • (42.2 miles) • Full Time • 11/4/2026

Great new Career Opportunity in Long-Term Care Pharmacy! Now Hiring – Field Service Technician– (Remote/Field work) Travel Locations: Yadkinville, NC, Winston-Salem, NC, and Greensboro, NC Hours: 6am - 6pm (Monday - Friday) weekends including standby pay/mileage As the Field Service Technician , you will provide field service support and maintenance, achieving a high level of customer satisfaction including building customer relations and conducting installations and system maintenance of sites, both individually and as a team. Under minimal supervision, we will ask you to show initiative in a team environment to successfully perform the following duties: Essential Duties and Responsibilities Complete advanced troubleshooting in escalated situations Accurately diagnose, repair, and maintai

Statesville, NC 28677 • (33.5 miles) • Full Time • 11/3/2026

Mack is looking for talent! Do you like a fast paced environment with upward mobility? Are you looking to work with key industry players in a world-class facility utilizing multiple processing technologies? If the answer is yes, Mack would like to speak with you about joining our Statesville, NC, team as a Tooling Engineer. As the manufacturing arm for our customers, Mack has built a worldwide reputation forplastic injection molding, machining, design work, sheet metal fabrication and contract manufacturing. The Mack team helps launch new products for some of the top fortune 500 companies, as well as cutting-edge technologies for start-up organizations. The Company’s engineers are the minds behind our success, and as a Tooling Engineer you will assuring Mack achieves its mission of achievi

Boone, NC 28607 • (39.1 miles) • Full Time • $1,200 / wk • 11/3/2026

Job Description: Travel throughout the USA using the latest technologies and industry methods to provide large transportation agencies with highway asset management systems, surveys and data that optimize maintenance and development and ensure the safety of all stakeholders. Our advanced pavement data-collection vehicles are equipped with precision survey systems and software and can perform any roadway data collection task. The modular design allows the vehicles to be easily reconfigured to meet your requirements and serves to cut excess, equipping the vehicles with the necessary surveying systems. As the vehicle ages, the subsystems can be integrated onto another chassis, and our customizable software can be updated to suit changing needs, making them an invaluable long-term investment.

Winston-Salem, NC 27101 • (42.2 miles) • Full Time • $26.00 to $35.00 / hr • 11/3/2026

Who Is Tri-Lift Industries? Tri-Lift Industries, Inc. is a third generation family business seeking qualified individuals to be part of our growing team. As the leader in material handling equipment and solutions, we represent CLARK, BYD, and Liugong forklifts as well as aerial equipment and solutions, covering North Carolina, South Carolina and Virginia. Our vision and mission is to be THE trusted long-term material handlings partner in the market by delivering proven industry leading products and services designed to enhance our customers business. We stand by our core values that provide passion, professionalism, integrity and team work. We are a large company still small enough to care. Tri-Lift Industries provides opportunities and offers continuous paid training, wages that are flexi

Wilmington, NC 28658 • (43.8 miles) • Full Time • $45.00 / hr • 11/3/2026

Role: Mechanical Engineer II Location : 100% onsite in Trivium, Newton, NC. Pay Rate $43/hr on W2 Duration: 12 +Months 8am - 5pm, M-F LEVEL EXPECTATION Mechanical Engineer II independently leads complex engineering work, provides technical direction, and delivers measurable manufacturing and capital-project outcomes. Position Summary Mechanical Engineer II serves as a senior individual contributor in a team environment responsible for leading complex mechanical engineering efforts that support optical fiber manufacturing qualification, validation, process improvement, equipment reliability, and capacity expansion. The role owns technical scope from concept through commissioning and sustained operation; develops safe, robust, and cost-effective solutions; and partners with operations, maint

Winston-Salem, NC 27101 • (42.2 miles) • Full Time • $22.00 to $28.00 / hr • 11/2/2026

Carolina Industrial ProductsField Service Technician – Industrial Equipment Company Vehicle Provided Carolina Industrial Products is seeking a motivated and mechanically inclined Field Service Technician to join our growing service team in the Charlotte area. This is a mobile, customer-facing role responsible for servicing industrial battery systems and related warehouse equipment at customer locations throughout the region. If you enjoy working independently, solving problems, and staying active instead of sitting behind a desk, this could be a great fit. We are willing to train the right candidate with strong mechanical aptitude and a great attitude. What You'll Do Perform preventative maintenance on industrial battery systems and charging equipment Diagnose and troubleshoot electrical a

Salisbury, NC 28144 • (44.6 miles) • Part Time • 11/1/2026

Position Overview I-2-I Solutions provides comprehensive environmental monitoring and water safety testing across Veterans Affairs healthcare facilities in North Carolina and Virginia. We are seeking Environmental Water Quality Technicians to execute collect quarterly water sampling, conduct field parameter testing, and manage regulatory reporting to help maintain safe potable and utility water systems. Coverage Areas & Quarterly Workload : Salisbury VA Medical Center | 1601 Brenner Ave, Salisbury, NC 28144 144 base samples/qtr Work Schedule & Availability Type: Part-time / Cyclical quarterly visits, with intermittent on-demand re-sampling support. Hours: Standard VA business hours (Monday–Friday, 8:00 AM – 4:30 PM). Planning: Field sampling dates are scheduled in advance, with a required

Mooresville, NC 28117 • (44.8 miles) • Full Time • 11/1/2026

Area Chief Engineer AtOpal Hotels Group, we believe great hotels are built by great people. We’re seeking an experienced, hands-on Area Chief Engineer to lead maintenance and engineering operations across three hotel properties that includesTownePlace Suites Kernersville,Hampton Inn Charlotte AirportandTownePlace Suites Mooresville. If you enjoy solving problems, developing teams, and keeping facilities safe, efficient, and guest-ready, we’d love to meet you. About the Role This full-time, multi-property position requires regular travel between three hotels. Candidates basedin Kernersville, Mooresville, or Greensboro, NCare preferred; Charlotte-area candidates will also be considered. This is an active, hands-on role that combines direct repairs and inspections with team leadership and fac

Claremont, NC 28610 • (35.6 miles) • Full Time • 10/31/2026

Job Overview: Candidate will be an employee of the Automation group supporting the manufacturing of optical fiber. This individual will provide technical support in the area of PC and PLC based controls and automation for improvement projects and production support. Requirements: Bachelor’s degree in Engineering, Computer Science, or a related technical field preferred, or equivalent combination of education and relevant experience. Experience with programming Rockwell (Allen-Bradley), Schneider, and/or Siemens PLC’s Excellent technical problem-solving skills Ability to contribute to the plant’s culture of continuous improvement Excellent communication skills Detail and quality oriented Ability to work with little supervision Preferred: Experience in fiber optic or other highly automated m

Lenoir, NC 28645 • (37.5 miles) • Full Time • $138,000 to $172,500 / yr • 10/31/2026

Are you an experienced electrical engineer who thrives on solving complex power system challenges and leading high-performing teams? Blue Ridge Energy is seeking an Engineering Manager to lead the planning, design, mapping, and development of our electric system while helping ensure safe, reliable service for the communities we serve. This is an exciting opportunity to make a lasting impact on the future of our electric infrastructure while working with a team committed to innovation, safety, and member service. What You’ll Do As the Engineering Manager, you will provide leadership and technical expertise to support the growth, reliability, and operation of Blue Ridge Energy's electric system. Key responsibilities include: Lead and develop a team of technical professionals. Prepare and man

Statesville, NC 28677 • (33.5 miles) • Full Time • 10/31/2026

Overview We are seeking a highly motivated and detail-oriented Controls Engineer to join our engineering team at AUTEC Car Wash Systems. This role is responsible for the design, development, and support of control systems that power our automated car wash equipment. The ideal candidate will have strong technical expertise in PLC programming, control system design, and industrial automation, with the ability to collaborate across teams to deliver innovative and reliable solutions. Responsibilities Design, program, and test control systems using PLCs, relays, timers, and other industrial automation components. Create and maintain accurate engineering documentation, including schematics, layout drawings, bills of materials (BOMs), product manuals, and technical bulletins. Develop test procedu

Statesville, NC 28677 • (33.5 miles) • Full Time • $70,000 / yr • 10/31/2026

Position Summary: The Manufacturing Engineer is responsible for designing, implementing, and improving manufacturing processes to ensure efficient production, quality control, and cost effectiveness. This role works cross-functionally with Engineering, Production, and Quality teams to support ongoing operations and new product launches. Key Responsibilities: Develop, evaluate, and improve manufacturing methods and processes for assembly, fabrication, and integration. Collaborate with product design engineers to ensure designs are optimized for manufacturability (DFM). Create and update work instructions, assembly documentation, and standard operating procedures (SOPs). Lead and support process improvement initiatives (LEAN, 5S, Kaizen, etc.). Investigate and resolve manufacturing issues re

Hickory, NC • (39.3 miles) • Full Time • 10/30/2026

Electrical Engineer Location: Spindale, NC (Company Headquarters) Job Type: Full-Time, In-person Salary: $110,000 – $160,000 (Based on Experience) *$15,000 Sign-On Bonus *Relocation Assistance Available for Highly Qualified Candidates Lead and Strengthen the Engineering Team Behind Landmark Electrical Construction Projects Fountain Services is seeking an experienced Electrical Engineer to lead and strengthen our Engineering Department supporting major commercial and industrial electrical construction projects throughout the Southeast. This is a department leadership role focused on people, technical guidance, problem-solving, quality, and continuous improvement . You will lead a team of approximately 8–10 engineering professionals while partnering closely with Project Management, Estimatin

Lenoir, NC 28633 • (39.8 miles) • Full Time • $19.00 to $22.00 / hr • 10/29/2026

Description We are seeking Data Center Fiber Technicians to support large-scale data center deployments across multiple U.S. locations. This role is responsible for fiber installation, rack assembly, fiber splicing, cable management, and troubleshooting physical layer infrastructure issues. Candidates with experience in data center environments, fiber optics, and rack-and-stack activities are highly preferred. Key Responsibilities Install, route, and terminate fiber optic cabling throughout data center facilities. Assemble, install, and organize data center racks and cabinets. Perform fiber splicing and maintain proper cable management standards. Complete rack-and-stack activities, including server installations and top-of-rack connections. Install and organize patch cabling between server

Mount Airy, NC 27030 • (25.4 miles) • Full Time • 10/28/2026

Industrial Engineer I Position Snapshot Identies, develops, justies, implements, and follows-up on projects to reduce operating costs by improving work methods, manufacturing processes, and pay systems for all facilities in the Concrete Reinforcing Products Business Unit. Essential Duties and Responsibilities An individual must be able to perform each duty satisfactorily. Identies, develops, justies, implements, and follows-up on projects designed to improve safety, quality, productivity, and reduce the overall operating cost for all facilities. Gathers and analyzes manufacturing data to evaluate and improve current manufacturing processes. Interprets, develops, plans, assigns, checks and directs work methods. Addresses work method complaints and resolves problems. This includes ensuring a