Lincolnton, NC 28092 • (39.9 miles) • Full Time • 11/1/2026

Major Responsibilities: Demonstrates knowledge in various modes and methods of oxygen delivery and the equipment needed for each and can conduct prescribed therapeutic procedures to achieve adequate oxygenation. Administers therapeutic procedures, understanding the purpose and benefits, and possible effects associated with each. Performs diagnostic procedures as outlined in policy. Initiates, monitors and maintains mechanical ventilators and non-invasive ventilators and is aware of the critical care duties and effects of such therapy. Independently evaluates current therapies using appropriate judgment and protocols, making proper recommendations concerning plans of care and patient education needs. Documents therapy and results as required by hospital, department and regulatory agencies.

Greer, SC 29650 • (43 miles) • Full Time • 10/18/2026

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’

Gaffney, SC 29340 • (36.6 miles) • Full Time • $101,683 to $142,494 / yr • 10/18/2026

Foods you love. Brands you trust. And a career that empowers you to grow. At Nestlé USA, we’re all working towards the same goal – to delight and deliver for our consumers. With a rich portfolio of beloved brands, including DiGiorno, Toll House, and Coffee mate, in 97% of U.S. households, we have a unique opportunity – and responsibility – to be there for every moment in our consumers’ lives. Joining Nestlé means becoming part of an inclusive workplace that inspires innovation, encourages strategic thinking and creativity, and celebrates your achievements. No matter where you work within the organization, you are empowered to challenge the status quo, embrace risk-taking, and pioneer new ideas. Our supportive and collaborative environment encoura

Greer, SC 29651-7282 • (41.3 miles) • Full Time • 11/4/2026

Field Service Technician (Appliance / Mechanical) – Company Vehicle + Paid Training Greenville, SC $24–$32/hr + Overtime + Holiday Bonus Pay + Full Benefits Super Source is a growing company in the hospitality industry, and we’re hiring a Field Service Technician to service commercial kitchen equipment across the Atlanta area. No experience with commercial equipment? We’ll train you. Like working independently? This is a field-based role with your own route and company vehicle. What You’ll Get $24–$32/hr based on experience Overtime available Holiday bonus pay opportunities Company vehicle (take-home) + tools provided Paid training – we teach you the equipment Full benefits: Medical, Dental, Vision, Life Paid time off Advancement opportunities as we grow What You’ll Do Diagnose and repair

Asheville, NC • (33.7 miles) • Full Time • 11/3/2026

Process Engineer Process Engineer Position Overview We are seeking a Process Engineer to drive continuous improvement and operational excellence across our manufacturing operations. The role focuses on analyzing current processes, identifying and implementing efficiency and quality improvements, reducing waste, and ensuring safe, cost-effective production. The successful candidate will partner with cross-functional teams to apply Lean and Six Sigma methodologies, develop standard work and controls, and deliver measurable improvements in throughput, yield, and reliability. Key Responsibilities Analyze existing manufacturing processes and data to identify inefficiencies, bottlenecks, and quality issues. Lead process improvement projects using Lean, Six Sigma and other continuous improvement

Marion, NC 28752 • (16 miles) • Full Time • 11/3/2026

Job Title: Manufacturing Engineering Trainee Location: Simpsonville, SC; Greenville, SC; Belton, SC; Rogersville, TN; Asheville, NC; Marion, NC; Kansas City, MO Reports to: Engineering Manager Employment Type: Full Time Industry: Manufacturing | Mechanical Power Transmission Components | Engineering Services Job Function: Engineering | Process Improvement Job Summary: The Manufacturing Engineering Trainee (MET) is an entry-level manufacturing engineering position tailored for high-potential future leaders of Dodge® Industrial. This program will follow a formal and structured rotational training and development program for 1-2 years. This role will include: Assigned daily mentorship from a technical and non-technical senior leader. Pre-assigned critical hands-on manufacturing projects that

Hickory, NC 28602 • (35 miles) • Full Time • $18.00 to $22.68 / hr • 11/3/2026

RNR Tire Express is ready to hire a full-time Field Collector with great customer service skills. An average field collection makes $18.00 to $20.68 with the bonuses . In addition to great pay and our family atmosphere , our office team also enjoys the following benefits and perks: Medical, dental, and vision insurance Long- and short-term disability Accident, critical illness, and cancer plans 401(k) matching plan Paid holidays Growth potential So, now that you've learned the who, what, where, and why, you may be wondering HOW ? It's easy! Just fill out our initial short, mobile-friendly online application . We hope to meet you soon! THE DAY-TO-DAY You can be found in the office Monday-Friday, 8:30am-6:30pm and Saturday 8:30am-3:30pm with one weekday off each week and Sundays off . Each d

Cherryville, NC 28021 • (31.7 miles) • Full Time • $80,000 to $90,000 / yr • 11/3/2026

Welding Engineer – Robotic Welding Fixture Design Farris Fab Machine, Inc. is seeking an experienced Weld / Industrial Engineer with a strong background in metal fabrication, welding processes, and robotic welding. This position will work closely with our engineering and production teams to develop efficient welding processes, design weld fixtures, and support both manual and robotic welding operations. The ideal candidate combines hands-on welding knowledge with strong engineering and SolidWorks skills and understands how to take a fabricated product from print through an efficient, repeatable production process. Key Responsibilities Design and develop weld fixtures and tooling for manual and robotic welding applications Create fixture designs and manufacturing drawings using SolidWorks D

Bessemer City, NC 28016 • (39.9 miles) • Full Time • 11/3/2026

We are representing a multi-disciplinary, Civil/Architectural/Environmental/Surveying/Field Services Construction Engineering firm that is looking for a Project Engineer, Water Resources in the Greater Charlotte region. Job Requirements: BS degree in in Civil Engineering. Minimum 4 years of experience in civil water design/water and wastewater design. Proficiency with AutoCAD and Civil3D. Lead evaluation and support of utility assets and develop recommendations for rehabilitation or replacement. Ability to assist with environmental studies, permitting, adherence of plans and specifications, alternative analyses, and other technical deliverables. Up to 10% travel.

Asheville, NC 28801 • (34.2 miles) • Full Time • $52.88 to $57.69 / hr • 11/3/2026

Job Title: Automation Engineer Job Description The Automation Engineer supports the deployment and optimization of automation solutions within a manufacturing environment, driving operational readiness, data-driven decision-making, and continuous improvement. This role develops and maintains automation documentation and training, collaborates closely with cross-functional teams, and leverages Industry 4.0 technologies, data visualization, and lean principles to enhance equipment performance, reliability, and usability. The position offers a career-focused opportunity in a growing site with advanced equipment, strong benefits, and significant investment in modern manufacturing capabilities. Responsibilities Support the operational readiness, commissioning, and deployment of automation solut

Kings Mountain, NC 28086 • (37.4 miles) • Full Time • 11/3/2026

Summary Researches, develops, designs, and tests electrical components, equipment, and. Adhere to all standards, codes regulations. Provide engineering support both internally and externally. Essential Duties and Responsibilities Create electrical schematics for production to use in unit assembly, create and test programs for PLCs, HMIs and VFDs, create part numbers for new components, options and units, create manuals for customers containing information on units, create work instructions for use by production and staff. Evaluate and test new components for possible use in production. Coordinate with customers to create new interfaces for machine integration. Use customer electrical schematics to design interfaces / determine interface compatibility. Coordinate with sales department to en

Spartanburg, SC 29301 • (38.3 miles) • Full Time • $26.00 to $35.00 / hr • 11/3/2026

Who Is Tri-Lift Industries? Tri-Lift Industries, Inc. is a third generation family business seeking qualified individuals to be part of our growing team. As the leader in material handling equipment and solutions, we represent CLARK, BYD, and Liugong forklifts as well as aerial equipment and solutions, covering North Carolina, South Carolina and Virginia. Our vision and mission is to be THE trusted long-term material handlings partner in the market by delivering proven industry leading products and services designed to enhance our customers business. We stand by our core values that provide passion, professionalism, integrity and team work. We are a large company still small enough to care. Tri-Lift Industries provides opportunities and offers continuous paid training, wages that are flexi

Wilmington, NC 28658 • (41.8 miles) • Full Time • $45.00 / hr • 11/3/2026

Role: Mechanical Engineer II Location : 100% onsite in Trivium, Newton, NC. Pay Rate $43/hr on W2 Duration: 12 +Months 8am - 5pm, M-F LEVEL EXPECTATION Mechanical Engineer II independently leads complex engineering work, provides technical direction, and delivers measurable manufacturing and capital-project outcomes. Position Summary Mechanical Engineer II serves as a senior individual contributor in a team environment responsible for leading complex mechanical engineering efforts that support optical fiber manufacturing qualification, validation, process improvement, equipment reliability, and capacity expansion. The role owns technical scope from concept through commissioning and sustained operation; develops safe, robust, and cost-effective solutions; and partners with operations, maint

Marion, NC 28752 • (16 miles) • Full Time • 11/2/2026

Project Engineering Technician II Location: Marion, North Carolina Status: Full-time - Mid Level Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons, Inc. (BLE), every member of our team has a personal stake in ensuring the success of our clients. We are all personally accountable for building lasting relationships and delivering outstanding results. We put people first, whether that is our clients, our employees, or our community. It is why we listen more and work harder to understand the unique needs of our clients. And it is why we prioritize the career development of every individual on our team. People are why we do this, and why we love what we do. We are at our best when we work together. That means bringing together a diverse team of talented, passionate, multidiscipli

Asheville, NC 28806 • (37 miles) • Full Time • 11/2/2026

Aeroflow Health – Senior Systems Engineer Aeroflow Health is a national leader in home medical equipment and clinical services. We combine technology, operational excellence, and compassionate expertise to deliver essential products and care directly to patients' homes. At Aeroflow Health, we make healthcare accessible by taking a holistic approach to how we care for our patients. We are equally passionate about taking care of our employees. Recognized as one of the fastest-growing healthcare companies in the U.S., an Inc. 5000 honoree, and a certified Great Place to Work®, Aeroflow continues to seek ways to be one of the nation's top employers. As we continue to grow, we remain committed to building an exceptional workplace where talented professionals are empowered, supported, and inspir

Asheville, NC • (33.7 miles) • Full Time • 11/2/2026

We are looking for an experienced Civil Engineer P.E. with Civil Construction and Design experience. The right candidate will have Civil 3D, AutoCAD, their PE certification or be able to obtain one. We are looking for someone who has experience managing design projects, site planning, guiding design teams through projects, visiting construction sites, budgets, managing projects. What you will do as a Civil Engineer P.E.: Lead all aspects of site civil for development and redevelopment projects for primarily private projects: site drainage, utilities, road design, grading, etc. Lead project team(s) of Design Engineer and Assistant Project Manager and Civil Designers Client relationships, existing and prospective Research data for accuracy and verification of project. Provide leadership trai

Arden, NC 28704 • (34.3 miles) • Full Time • 11/1/2026

Career Architecture Title: Construction Engineering Technician IV Job Ad Title: Construction Materials Engineering Technician Requisition Number: 2026-1410-05 Are you a hard-working and experienced Materials Testing Technician who can accommodate frequent travel seeking a challenging opportunity to elevate your career with a firm committed to our employees and providing high-quality service to our clients? S&ME is looking for a full-time Construction Materials Engineering Technician to join our Construction Services team in Asheville, North Carolina. At S&ME, we have a history of delivering innovative geotechnical, civil, environmental, and construction material testing for over 50 years. Over the decades, we have grown into a trusted partner for clients across various industries, includin

Greer, SC 29651 • (40.2 miles) • Full Time • $25.00 to $35.00 / hr • 11/1/2026

Benefits: Paid time off Training & development Vision insurance Competitive salary Dental insurance Free uniforms Health insurance Opportunity for advancement 401(k) Service Engineer Technician Company: Niftylift, Inc. Location: Greer, SC Schedule: Monday–Friday, 8:00 AM–4:30 PM (No weekends) Full Time Position Overview We are seeking a highly skilled and customerfocused Service Engineer Technician to join our service team. This role is responsible for diagnosing, repairing, and maintaining aerial work platforms (boom lifts) for both customer-owned units and company stock machines. Previous experience preferred. The ideal candidate demonstrates strong technical expertise, sound judgment, and a commitment to delivering exceptional service quality. Key Responsibilities Diagnose, troubleshoot

Asheville, NC • (33.7 miles) • Full Time • $16.00 to $25.00 / hr • 10/31/2026

About Us: Our company is a well-established leader in providing water and septic solutions for Western North Carolina. For over a decade, we've specialized in delivering essential water and septic solutions including water testing, advanced water filtration, drinking water well services (inspections and repairs), septic system expertise (installations, inspections, and repairs), and radon-in-air testing. Our commitment to our customers is reflected in our unmatched rapid response times and highly competitive pricing, making us a trusted partner for homeowners and businesses throughout the region. If you're looking for a dynamic team that values efficiency, quality, and making a real difference, join our team and contribute to a healthier environment for all. Description: The Senior Septic

Lenoir, NC 28645 • (41.2 miles) • Full Time • $138,000 to $172,500 / yr • 10/31/2026

Are you an experienced electrical engineer who thrives on solving complex power system challenges and leading high-performing teams? Blue Ridge Energy is seeking an Engineering Manager to lead the planning, design, mapping, and development of our electric system while helping ensure safe, reliable service for the communities we serve. This is an exciting opportunity to make a lasting impact on the future of our electric infrastructure while working with a team committed to innovation, safety, and member service. What You’ll Do As the Engineering Manager, you will provide leadership and technical expertise to support the growth, reliability, and operation of Blue Ridge Energy's electric system. Key responsibilities include: Lead and develop a team of technical professionals. Prepare and man

Gaffney, SC 29341 • (29.2 miles) • Full Time • 10/31/2026

Description: Summary/Objective The field service technician is responsible for troubleshooting electro-mechanical problems, completing installations, and performing unscheduled repairs and scheduled maintenance on equipment, based upon customer demand and need; and to provide complete customer satisfaction in a polite and professional manner. Essential Job Functions: Effectively analyzes problem situations pertaining to breakdowns of customer equipment and recommends to customer actions necessary to correct situation. Exhibits a professional demeanor and promotes goodwill between the company and customers by providing a superior level of customer service. Observes, analyzes, and determines corrective course of action for service and repair of customer equipment. Performs necessary repairs

Spindale, NC • (9.1 miles) • Full Time • 10/30/2026

Electrical Engineer Location: Spindale, NC (Company Headquarters) Job Type: Full-Time, In-person Salary: $110,000 – $160,000 (Based on Experience) *$15,000 Sign-On Bonus *Relocation Assistance Available for Highly Qualified Candidates Lead and Strengthen the Engineering Team Behind Landmark Electrical Construction Projects Fountain Services is seeking an experienced Electrical Engineer to lead and strengthen our Engineering Department supporting major commercial and industrial electrical construction projects throughout the Southeast. This is a department leadership role focused on people, technical guidance, problem-solving, quality, and continuous improvement . You will lead a team of approximately 8–10 engineering professionals while partnering closely with Project Management, Estimatin

Asheville, NC 28801 • (34.2 miles) • Full Time • 10/30/2026

Description: Join our team as a Project Engineer within our Utilities (Water/Wastewater) practice area. This is a hybrid role based out of our Asheville, North Carolina office. In this role, you will contribute to the planning, design, and management of water and wastewater treatment facilities, pump stations, distribution, and collection systems. You will oversee project execution, develop process designs, coordinate with multidisciplinary teams, and ensure compliance with regulatory standards. Ideal candidates have experience in water/wastewater treatment processes, hydraulic modeling, permitting, and construction administration, with a passion for delivering sustainable and resilient water infrastructure solutions. Assist in the design of water and wastewater treatment systems, pump sta

Asheville, NC 28801 • (34.2 miles) • Full Time • 10/30/2026

RVE, an Ardurra Company, is seeking an Electrical Engineering Intern in our Asheville, NC Office This candidate will work under general supervision and perform assignments of limited scope that require the application of standard engineering techniques, procedures, and criteria in carrying out a sequence of related tasks. Projects may include electrical system design, power distribution, lighting systems, electrical load calculations, equipment selection, fire alarm systems, emergency power systems, and related building and infrastructure improvements. The intern will gain hands-on experience supporting the design and analysis of electrical systems for a variety of building and infrastructure projects. Primary Function: The Electrical Engineering Intern will work under supervision to suppo

Lincolnton, NC 28092 • (39.9 miles) • Full Time • 10/30/2026

Company Description Robert Bosch Tool Corporation is an outstanding company with excellent benefits. We are growing rapidly and need top-notch technicians to work on state-of-the-art equipment and controls. We are building a world-class team of technicians to be the best maintenance crew in this area. We believe in training and promoting from within as much as possible. We want motivated, energetic people who have a passion for excellence to join our team and grow to the limits of their capabilities. If this is you, come and impress us, and be a part of a winning team. Job Description The Sr. TPM Engineer is responsible for defining, developing, coordinating, and sustaining the processes, systems, standards, and governance required to deploy the TEF3 maintenance and TPM strategy. This role

Forest City, NC 28043 • (13.2 miles) • Full Time • 10/29/2026

Description: Job Summary: The Senior Controls Engineer is responsible for the design, development, programming, and testing of custom automation equipment used to manufacture modular construction assemblies. This role requires a hands-on engineer who can move from concept to a fully operational, safety-certified machine, often building solutions for applications that have no industry precedent. The position combines electrical/controls design, robotics integration, and cross-functional collaboration with production, safety, and mechanical design teams. Essential Duties and Responsibilities • Design machine control systems, including specification of electrical and control devices and production of wiring schematics • Develop control strategies and define equipment operation in collaboratio

Arden, NC 28704 • (34.3 miles) • Full Time • 10/29/2026

Company Description TUTCO Farnam Custom Products is seeking a motivated Electrical Engineer or Electrical Engineering Technology Graduate to join our engineering team in Arden, North Carolina. This position is ideal for recent graduates and early-career professionals from two-year and four-year engineering programs who want hands-on experience designing industrial heating systems, control panels, and automation solutions. The role includes electrical design, control panel development, CAD-based engineering, and support of custom-engineered heating products. Job Description Duties What You'll Do Design electrical schematics, wiring diagrams, and control panel layouts. Develop and support PLC-based control systems for industrial heating and process applications. Create and modify PLC program

Asheville, NC • (33.7 miles) • Full Time • 10/29/2026

Full-time Hybrid (Average of 2-3 days in office per week) Mars Hill, NC $90,000 - $120,000 + benefits About Us The Ammortal Chamber integrates five science-backed modalities into one immersive session. Our clients include wellness clinics and spas, sports teams and athletic departments, hotels, and individuals who bring the Chamber into their homes. We are a small team with a startup culture. Hardware and software engineers, health professionals, and operators work side by side. Since shipping our first product we have grown steadily, and the software that drives the Chamber is now at the center of what comes next. This role offers hands-on experience across the whole product, close mentorship from a senior engineer, and the chance to see your work running in the field. What is this role a

Lenoir, NC 28633 • (37.4 miles) • Full Time • $19.00 to $22.00 / hr • 10/29/2026

Description We are seeking Data Center Fiber Technicians to support large-scale data center deployments across multiple U.S. locations. This role is responsible for fiber installation, rack assembly, fiber splicing, cable management, and troubleshooting physical layer infrastructure issues. Candidates with experience in data center environments, fiber optics, and rack-and-stack activities are highly preferred. Key Responsibilities Install, route, and terminate fiber optic cabling throughout data center facilities. Assemble, install, and organize data center racks and cabinets. Perform fiber splicing and maintain proper cable management standards. Complete rack-and-stack activities, including server installations and top-of-rack connections. Install and organize patch cabling between server

Forest City, NC • (11.9 miles) • Full Time • 10/28/2026

Must have a degree in some sort of relevant field-doesn't need to be necessarily electrical engineering, but something that lines up(won't even consider a degree in finance or some unrelated field) Experience within a CO-OP/Utility/Civil Engineering-not all three, but at least one of those Experience design or the ability to "work plan” with the analysts and technicians Would like someone with CAD or GIS experience and another nice to have would be "Transmission Line design” or "substation” experience Onsite in Forest City, NC Individual’s duties and responsibilities: 1. Maintains knowledge of all policies, territorial assignment laws and regulations. 2. Performs required engineering functions for construction, maintenance and operation of distribution lines, load management system, substa

Forest City, NC 28043 • (13.2 miles) • Full Time • $80,000 to $85,000 / yr • 10/28/2026

Position Summary: The safety and health of employees take precedence over any other duties of this position. Is a role model for TQM practices displayed using TQM tools in the everyday performance of responsibilities and in dealing with others. Under minimal supervision is responsible for conceiving, developing, implementing, and procedures. Is responsible for entire engineering projects including documentation, parts selection and specification, construction, debugging, installation and (internal) customer interface as well as all aspects of project management. Interfaces with division management on strategic technical issues. Primary Responsibilities: Works safely and promotes safety in all aspects of employment. Maintains a working knowledge of Sonoco's products, processes and machinery

Asheville, NC 28801 • (34.2 miles) • Full Time • 10/28/2026

Job Description: We are looking for a Systems Engineer to support manufacturing automation, robotics, and controls at the Pratt & Whitney manufacturing site in Asheville, NC. The candidate will help establish and implement automation strategies to improve manufacturing performance and support new product development. Key Responsibilities: Support the development and execution of manufacturing automation strategies. Support automation requirements for new product development. Develop and execute manufacturing methods and identify process optimization opportunities. Establish and enforce site standards for controls, robotics, and automation. Support Ethernet networking and automation network equipment maintenance. Troubleshoot hardwired components and resolve technical issues. Support automa

Asheville, NC 28801 • (34.2 miles) • Full Time • 10/28/2026

At Optima Engineering , an employee-owned MEP engineering consulting firm, we focus on delivering high-quality mechanical, electrical, plumbing, fire protection, and technology design solutions for buildings across the Southeast. Our projects include higher education, municipal, K-12, and commercial facilities. We are looking for a skilled and dedicated Electrical Engineer to join our team and help us continue to provide thoughtful and efficient designs for our clients. Requirements Registration as a Professional Engineer (PE) in North Carolina Bachelor’s degree in Electrical Engineering or related field. Minimum of 5 years of experience in MEP building systems design for higher education, municipal, K-12, and/or commercial facilities. Proficiency in Revit and/or AutoCAD required. Strong c

Hickory, NC 28602 • (35 miles) • Full Time • $95,000 to $122,000 / yr • 10/28/2026

#ENG-IT-01 Job Summary In this role, you will be responsible for creating and modifying Allen Bradley PLC programs, designing and implementing new control systems projects, and managing the controls engineering scope for various projects. This position involves working closely with external system integrators to deliver fully integrated process equipment systems. Key Responsibilities Create and modify Allen Bradley PLC programs for our fiber optic cable production plant. Design and implement new control systems projects. Manage the controls engineering scope of process improvement, capital expansion, and obsolescence mitigation projects. Implement robust, cost-effective automation and process machine control systems. Interface with external system integrators to deliver fully integrated pr

Blacksburg, SC 29702 • (37.5 miles) • Full Time • $72,000 to $78,000 / yr • 10/28/2026

Are you ready to enhance manufacturing processes and technology integration in a dynamic environment? About the Role This position is pivotal in sustaining product performance and improving key manufacturing metrics such as yield, efficiency, and reliability. You will address process issues, implement solutions, and facilitate technology transfer from pilot lines to our various sites, contributing significantly to operational excellence. Key Responsibilities Ensure adherence to all safety and environmental procedures. Sustain daily production, ensuring efficiency, quality, and reliability within defined limits. Lead discussions with cross-functional departments and sites for effective problem-solving and communication. Design statistical experiments and analyze data using statistical metho

Wilmington, NC 28658 • (41.8 miles) • Full Time • $45.00 to $50.00 / hr • 10/28/2026

Position: Process Engineer II , Req#: CRNGJP00030239 Location: Newton, NC (100% onsite) Duration: 12 +Months Contract with potential to extend Schedule: Full-time, Monday–Friday, 8:00 a.m.–5:00 p.m. Interview Process will consist of a Teams/Video Call, possibly a second interview onsite. Work Environment Primarily on-site in office, manufacturing, and construction environments. Periodic travel to nearby client sites (10 - 12 min drive) and occasional off-hours support may be required for project activities, shutdowns, commissioning, or startup. The manager highlighted that a Bachelor's degree is required. He is also looking for candidates with Data analytics experience Ability to work well with others/Team Player Great communicator and someone who can build relationships. Job Description:

Newton, NC 28658-8998 • (42.8 miles) • Full Time • 10/28/2026

Job Title: Process Engineer II Location: Newton, NC Schedule: Full-time, Monday–Friday, 8:00 a.m.–5:00 p.m. Work Arrangement: On-site Position Summary The Contract Process Engineer II supports manufacturing process qualification, optimization, capacity expansion, and capital projects. This role develops process solutions, analyzes performance data, resolves technical issues, and supports project execution from design through commissioning and closeout. Working with production, maintenance, quality, R&D, EHS, automation, project management, vendors, and contractors, the engineer improves safety, quality, yield, capacity, reliability, and cost performance. Key Responsibilities Support equipment upgrades, process development/modifications, and continuous-improvement initiatives from design th

Newton, NC 28658-8998 • (42.8 miles) • Full Time • $40.00 to $45.00 / hr • 10/28/2026

Location Newton, NC Schedule Full-time, Monday–Friday, 8:00 a.m.–5:00 p.m. Work Arrangement On-site Position Summary The Contract Process Engineer II supports manufacturing process qualification, optimization, capacity expansion, and capital projects. This role develops process solutions, analyzes performance data, resolves technical issues, and supports project execution from design through commissioning and closeout. Working with production, maintenance, quality, R&D, EHS, automation, project management, vendors, and contractors, the engineer improves safety, quality, yield, capacity, reliability, and cost performance. Key Responsibilities Support equipment upgrades, process development/modifications, and continuous-improvement initiatives from design through startup and performance veri

Newton, NC 28658-8998 • (42.8 miles) • Full Time • $35.00 to $46.00 / hr • 10/28/2026

Job Title: Process Engineer II Location: Newton, NC Schedule: Full-time, Monday–Friday, 8:00 a.m.–5:00 p.m. Work Arrangement: On-site Position Summary The Contract Process Engineer II supports manufacturing process qualification, optimization, capacity expansion, and capital projects. This role develops process solutions, analyzes performance data, resolves technical issues, and supports project execution from design through commissioning and closeout. Working with production, maintenance, quality, R&D, EHS, automation, project management, vendors, and contractors, the engineer improves safety, quality, yield, capacity, reliability, and cost performance. Key Responsibilities Support equipment upgrades, process development/modifications, and continuous-improvement initiatives from design th

Newton, NC 28658-8998 • (42.8 miles) • Full Time • 10/28/2026

The Fountain Group is a national staffing firm and we are currently seeking a Process Engineer II for a prominent client of ours. This position is located in Newton, NC 28658 . Details of the position are as follows: Job Details: Pay: $46.00-49.00/hour to Start!! 1-year contract, with potential for extension/conversion based on performance and budget. Monday-Friday: 8:00 AM - 5:00 PM (100% Onsite). Position will be mainly responsible for supporting manufacturing process qualification, process optimization, equipment installations, commissioning activities, and manufacturing process improvement initiatives. Position will be responsible for driving equipment qualification, capacity expansion projects, process development, and continuous improvement efforts to improve safety, quality, reliabi

Newton, NC 28658-8998 • (42.8 miles) • Full Time • $45.00 to $50.00 / hr • 10/28/2026

Duration: 12 Months Job Overview: The Contract Process Engineer II supports manufacturing process qualification, optimization, capacity expansion, and capital projects. This role develops process solutions, analyzes performance data, resolves technical issues, and supports project execution from design through commissioning and closeout. Working with production, maintenance, quality, R&D, EHS, automation, project management, vendors, and contractors, the engineer improves safety, quality, yield, capacity, reliability, and cost performance. Key Responsibilities Support equipment upgrades, process development/modifications, and continuous-improvement initiatives from design through startup and performance verification. Qualify, evaluate, troubleshoot, and optimize manufacturing processes, eq