Beloit, KS 67420 • (43 miles) • Full Time • 10/17/2026

Department: Service Reports to: Service Manager or Shop Foreman Supervises: None Purpose: Performs service repairs and maintenance work on customer and/or dealership owned agricultural and turf equipment. May include diagnostic service and repair. Responsibilities: Performs basic repairs on agricultural and turf equipment and established Ag Management Solutions (AMS) products. May include diagnostic service and repair. May perform diagnosis and repair in field when necessary. Meets minimum recovery and efficiency numbers. Adheres to prescribed work schedule. Follows all safety rules and regulations in performing work assignments. Completes all paperwork required in conjunction with work assignments, including accounting for all time on timecard and for all materials used in performing work

Hastings, NE 68901 • (42.3 miles) • Full Time • $20.25 to $24.25 / hr • 10/16/2026

Job Details: Our CNC Machine Operators are responsible for using our CNC machines to cut and shape our die castings to our customers’ specifications. With direct supervision available, using programmed instructions, blueprints, and in accordance with standard shop practices, operate CNC machines to perform a sequence of operations such as turn, mill, drill, tap, bore, ream, and countersink a variety of parts. Individuals will occasionally assist in modification of set up to ensure machining within required specifications. Individuals must be able to work with calipers, micrometers, gauge pins, custom gauges, dial gauges, and digital gauges to visually identify defective parts. No previous experience or post-secondary education is required. Employees will be trained on how to complete job t

Beloit, KS 67420 • (43 miles) • Full Time • 10/7/2026

Position Summary The Machinist II independently operates established CNC Mill or Lathe work and performs routine adjustments and basic setup tasks within demonstrated training. This position reads production documentation, verifies parts, responds to normal tool wear, and maintains consistent quality and output with limited supervision. Key Responsibilities Machine Operation & Setup Support • Operate assigned CNC equipment independently on established jobs and maintain expected cycle flow. • Load programs, locate setup documentation, verify tools and workholding, and assist with or perform basic repeat setups when authorized. • Replace worn inserts or approved tools, enter tool wear adjustments, and make routine offsets within assigned authority. • Complete proper startup, warm-up, shutdow

Hebron, NE 68370 • (28.2 miles) • Full Time • 9/29/2026

Position : CNC Operator - Weekday Shifts Hebron, Nebraska We’re looking for Entry Level CNC Operators to join our week-day shifts! Why MetalQuest? Build a Career, Not Just a Job At MetalQuest, we combine cutting-edge equipment with a supportive, family-oriented culture. Our team members take pride in their work, push themselves to improve every day, and hold each other to high standards. If you’re ready to grow your skills with one of the fastest-growing industries, and be part of a team that feels like family, we’d love to meet you. Apply today to join our Hebron, Nebraska location. Interested but no CNC experience? No problem.At MetalQuest, we believe many skills can be taughtbut attitude, attention to detail, and teamwork are what sets an excellent team apart from the rest. What You’ll

Hastings, NE 68901 • (42.3 miles) • Full Time • $21.50 to $27.50 / hr • 10/16/2026

Responsibilities: Our Quality Assurance Inspectors are responsible for monitoring and maintaining the quality of our die-cast aluminum parts throughout all stages of the process. Their duties include testing and inspecting products, effectively reading blueprints and diagrams to determine proper dimensions, interpreting data, advising on process adjustments, identifying defects, utilizing various gauging tools and techniques, and conducting internal QMS, gauge, and process audits. Experience operating a coordinate measuring machine is desired. Qualifications: A one-year certificate from a college or technical school; or one to three years related experience is required for this position. Applicants must be able to read and interpret documents such as maintenance instructions and procedural

Beloit, KS 67420 • (43 miles) • Full Time • 10/7/2026

Position Summary The Machinist II independently operates established CNC Mill or Lathe work and performs routine adjustments and basic setup tasks within demonstrated training. This position reads production documentation, verifies parts, responds to normal tool wear, and maintains consistent quality and output with limited supervision. Key Responsibilities Machine Operation & Setup Support • Operate assigned CNC equipment independently on established jobs and maintain expected cycle flow. • Load programs, locate setup documentation, verify tools and workholding, and assist with or perform basic repeat setups when authorized. • Replace worn inserts or approved tools, enter tool wear adjustments, and make routine offsets within assigned authority. • Complete proper startup, warm-up, shutdow

Beloit, KS 67420 • (43 miles) • Full Time • 10/7/2026

CNC Machinist Responsibilities: Set up, Operate, and Maintain Precision Equipment (drills, lathes, and mills)for accurate product manufacturing Program precision equipment according to per-job specifications Get information from all relevant sources and apply the latest knowledge to the work. Perform inspections of equipment, materials, and products. Analyze information and find the best solutions to problems. Maintain clear and honest communication at all times. Keep the work environment safe. CNC Machinist Skills Understands the operations of drills, lathes, and milling equipment. Problem Solving Skills: Know why machines aren’t at peak performance, how to increase output and how to fix errors. Attention to Detail: work with precision equipment, measurements have tight tolerances. Being

Hastings, NE 68901 • (42.3 miles) • Full Time • $21.75 to $28.50 / hr • 9/30/2026

Die-Cast set up Trainee for the first shift. Shift: Mon.- Thurs., 5:00am - 3:15pm. Overtime if needed is worked on Friday- 5:00am to 1:00pm. Responsibilities and Requirements: Assist in the set-up and operation of the die-casting machine to form a variety of production aluminum parts. Individuals must have forklift experience and be able to work in a hot work environment. Ensuring that the parts produced meet our quality standards and conform to print specifications, tending to our metal melting furnaces, transferring molten aluminum, and assisting in adhering to the current housekeeping/cleaning schedule. No previous experience or post-secondary education is required. Employees will be trained on how to complete job tasks such as properly operating all equipment necessary for the job by o

Beloit, KS 67420 • (43 miles) • Full Time • 10/5/2026

Role: Individual will use various painting techniques that will include but are not limited to powder coat, wet paint spraying, various materials. Material preparation such as cleaning, masking, among other techniques is required. Responsibilities: • Prepare parts for coating • Follow all principles and practices of powder coating application • Operate all coating equipment including guns, hoppers and booth collection systems • Observe machine gauges and equipment operation to detect defects • Determine paint flow, viscosity and coating quality by performing visual inspections or by using viscometers • Bake parts at appropriate temperatures within time limitations • Knowledge of thermosetting resin coatings, wash and pretreatments • Ensure that all components are produced/coated efficientl

Hastings, NE 68902 • (42.3 miles) • Full Time • $21.75 to $28.50 / hr • 10/1/2026

Job description: We are seeking a Metal Tender whose main focus is in the melting area. Individual may be required to operate die cast machines and assist in producing high-quality aluminum parts. Other responsibilities may include, die cast machine setup, operation, and quality checks to ensure parts meet specifications. Key Responsibilities: Assist in setup and operation of die casting machines following standard procedures and instructions. Metal tend and refill furnaces to ensure a smooth workflow. Empty and recycle scrap bins. Perform operational setup tasks such as connecting cooling lines, setting time interval controls, adjusting temperatures, and heating dies. Use measuring instruments (depth micrometer, Vernier calipers, machinist rule) to verify tolerances and ensure quality. In

Beloit, KS 67420 • (43 miles) • Full Time • 10/5/2026

Role You are responsible forreading and interpreting design blueprints, programming the CNC machine, and adjusting the machine settings until the desired specifications are met. You are always trying to improve the accuracy and efficiency of programs for part production. This position is essential to ensure the success of the company. Qualifications 2+ years of 3 and 4 axis machine experience is required MasterCam X experience preferred- will train Good communication and interpersonal skills Ability to work with minimal supervision Ability to lift 50 pounds Ability to inspect parts with various measuring tools Must have good manual dexterity Responsibilities Read technical drawings and set up the machines in accordance with these blueprints Use computer software (Mastercam) to model cuttin

Hastings, NE 68902 • (42.3 miles) • Full Time • $25.25 to $33.50 / hr • 9/25/2026

Job description: We are seeking a highly skilled and motivated CNC Setup Technician to join our manufacturing team. In this role, you will be responsible for preparing, setting up, and optimizing CNC (Computer Numerical Control) machines to ensure efficient production of high-precision components. Your expertise will help drive quality, productivity, and continuous improvement in a fast-paced manufacturing environment. This position offers an exciting opportunity to work with advanced machining equipment and contribute to innovative manufacturing processes. Duties/Responsibilities: Set up CNC milling machines and CNC lathes, ensuring proper installation of tooling, fixtures, and workpieces according to blueprints and technical specifications. Program CNC machines using CAM (Computer-Aided

Beloit, KS 67420 • (43 miles) • Full Time • 10/5/2026

Role You are responsible forreading and interpreting design blueprints, programming the CNC machine, and adjusting the machine settings until the desired specifications are met. You are always trying to improve the accuracy and efficiency of programs for part production. This position is essential to ensure the success of the company. Qualifications 2+ years of 3 and 4 axis machine experience is required MasterCam X experience preferred- will train Good communication and interpersonal skills Ability to work with minimal supervision Ability to lift 50 pounds Ability to inspect parts with various measuring tools Must have good manual dexterity Responsibilities Read technical drawings and set up the machines in accordance with these blueprints Use computer software (Mastercam) to model cuttin

Hastings, NE 68902 • (42.3 miles) • Full Time • $20.25 to $24.25 / hr • 9/25/2026

Job Description: We are seeking an individual who can perform the following tasks with direct supervision available: follow programmed instructions, follow blueprints and standard shop practices, and operate CNC machines to perform a sequence of operations such as turning, milling, drilling, tapping, boring, reaming, and countersinking on a variety of parts. Individual will occasionally assist in modification of set up to assure machining within required specifications. After on-the-job training, individual must be able to work with calipers, micrometers, gage pins, custom gages, dial gauges and digital gauges to visually identify defective parts. No previous experience or post-secondary education is required. Employees will be trained how to complete job tasks such as reading prints, iden

Beloit, KS 67420 • (43 miles) • Full Time • 10/5/2026

Laser Operator Role The role of this position is to manufacture metal products using machines that employ lasers and computerized equipment. It is important that someone in this position always pays attention to the machine to ensure that it is working properly. They are responsible for the daily setup and operation of one or more CNC cutting machines. They will also assist other CNC operators with any of their daily duties including area housekeeping, maintenance work, part cleaning and material staging. Responsibilities Responsible to Set up, operate, shut down procedures and maintain CNC lasers to produce parts using setup instructions, shop orders and prints Facilitate work-order paper flow in accordance with company quality standards Download laser programs and modify them, as needed,

Beloit, KS 67420 • (43 miles) • Full Time • 10/8/2026

Position Summary The Machine Shop Supervisor is a hands-on leadership role responsible for overseeing daily operations within the machining department. This position leads a team of machinists and machine operators while actively supporting setups, troubleshooting machining issues, optimizing production processes, and ensuring parts meet customer specifications. The ideal candidate is an experienced machinist with strong leadership skills who can balance shop floor supervision with technical machining expertise. They serve as the primary resource for machining best practices, setup efficiency, quality standards, employee development, and production execution in a high-mix, custom manufacturing environment. This role reports to the Plant Manager and works closely with Quality, Estimating, E