Please Accept our Privacy Policy
SPG CONSULTING SERVICES LLC
Orange, MA • (36.7 miles) • Full Time • $42,000 to $55,000 / yr • 11/20/2026
Role: Quality Inspector Location:Orange, MA (locals and relocation is also fine) Visa-USC/GC/GC EAD visa sponsorship is available. Salary range: $42,000-$55,000/year Job Overview: The Quality Inspector will ensure all products and processes meet company standards and customer specifications. The ideal candidate will have Certified Welding Inspector (CWI) credentials (preferred) and proficiency in Non-Destructive Testing (NDT) methods, including Visual Testing (VT), Magnetic Particle Testing (MT), Penetrant Testing (PT), and Ultrasonic Testing (UT). The Quality Inspector must have a strong understanding of Non-Destructive Testing methods, and proven expertise in inspection techniques for manufacturing processes. This role will work directly with the QA Manager and Production Manager to ensuKelly Services
Claremont, NH 03743 • (15.4 miles) • Full Time • $23.00 / hr • 11/20/2026
Kelly Services is seeking a detail-oriented and reliable Mechanical Assembler for a contract role in Claremont, NH. Under limited supervision, you will perform a variety of routine mechanical assembly operations, ensuring high-quality and on-time production. Location: Claremont, NH Schedule: Monday – Friday, 7:00am – 4:00pm Pay Rate: $23.00/hour Essential Duties and Responsibilities Assemble units using visual aids, verbal and/or written instructions. Prepare parts for box build and final assembly. Assemble units following the correct hardware sequence. Utilize rivet guns, electric screwdrivers, small hand tools, and air compressor tools safely and efficiently. Properly document and report assembly problems. Verify part numbers and descriptions using Bill of Material (BOM). Use SAP for conRPS Recruitment
Peterborough, NH 03458 • (27.1 miles) • Full Time • $25.00 to $35.00 / hr • 11/20/2026
Craft flight-critical precision parts as a CNC Cylindrical Grinding Machinist Location: Peterborough, NH Job Type: Full-Time | Permanent Compensation: $25.00–$35.00 per hour, based on experience Join a growing aerospace manufacturer where your CNC grinding expertise directly supports mission-ready components. If you thrive in a precision environment and enjoy owning your setups from start to finish, this role offers stability, modern equipment, and room to grow. A day in the life Start your shift by reviewing prints and setups for high-precision components. Independently set up, operate, and troubleshoot CNC grinding and hard-turning equipment for ID/OD work. Make tooling and offset adjustments to hold tight tolerances throughout the run. Verify part quality using micrometers, calipers, inApplied Engineering
Concord, NH • (39.3 miles) • Full Time • 11/20/2026
Electrical Product Development Engineer | Remote JOB SUMMARY We are seeking a motivated and hardworking individual to join our team as an Electrical Product Development Engineer. You will be part of a group of engineers dedicated to high-quality work, value-add solutions, skill development, and career growth. We welcome candidates from the following states to apply: Arizona, Colorado, Illinois, Iowa, Michigan, Minnesota, New Hampshire, North Dakota, South Dakota, Texas, and Wisconsin. As an Electrical Product Development Engineer, you will: Lead electrical design and validation for major subsystems and product areas Translate system requirements into practical, robust electrical designs Own schematics, drawings, calculations, specifications, and bills of material Drive design reviews, tradAdvanced Cable Ties,
Gardner, MA 01440 • (41.8 miles) • Full Time • $60,000 to $80,000 / yr • 11/20/2026
SUMMARY: The Production Scheduler/Purchaser is responsible for creating, monitoring and updating production schedules for the Molding Department, working closely with production management, Maintenance Staff and Customer Service, to meet and maintain inventory needs. Additionally, the Production Scheduler/Purchaser is responsible for securing materials and components to meet the company obligations. ESSENTIAL DUTIES: · Always represent ACT in the highest professional and ethical manner. · Develop, maintain, and update production schedules based on customer demand, sales forecasts, and inventory requirements. · Coordinate production priorities with Production Management to ensure schedules are met and customer needs are supported. · Work closely with Maintenance to coordinate equipment andCommunity Health Center Of Franklin County Inc
Greenfield, MA 01301 • (38.1 miles) • Full Time • $100,000 to $120,000 / yr • 11/19/2026
JOB DESCRIPTION POSITION TITLE: Director of Quality and Population Health POSITION SUMMARY: The Director of Quality and Population Health leads CHCFC’s Quality Improvement and Population Health programs, with accountability for program planning, implementation, and evaluation. The Director works across departments to improve patient outcomes, access, and health equity; leads measurable improvement initiatives; and oversees quality reporting. The position directly supervises Population Health staff and independently manages program priorities and follow-through within plans approved by the Chief Medical Officer. REPORTS TO: Chief Medical Officer FLSA STATUS: Exempt PRIMARY RESPONSIBILITIES 1. Lead Quality Improvement and Performance Management Develops quality and population health prioritiCirtronics Corporation
Milford, NH 03055 • (39.8 miles) • Full Time • 11/19/2026
Join the team at Cirtronics in Milford, NH – just a short commute from Nashua and Manchester. We're actively hiring for a full-time Electro-Mechanical Inspector , with the opportunity to start in as little as 1–2 weeks. If you have a keen eye for detail, enjoy working with high-quality electronic and electro-mechanical products, and take pride in ensuring workmanship meets industry standards, this is a great opportunity to join a supportive, team-oriented manufacturing environment. What You'll Do •Inspect electro-mechanical assemblies at various stages of production •Read and interpret bills of materials, schematics, process sheets, work instructions, and Certificates of Conformance •Complete inspection documentation and records accurately •Support the timely flow of inspected assemblies tHaigh-Farr Inc
Bedford, NH 03110 • (42.6 miles) • Full Time • 11/19/2026
Description: Haigh-Farr is a premier antenna design, manufacturing and test house developing products used across all platforms in the aerospace industry including missions to Mars, the International Space Station and products fielded to the U.S. Military supporting the warfighter. In our over 50-year history we have enjoyed steady, planned growth. Haigh-Farr plans to further grow our team and capabilities to meet increasing demand and to expand into new markets and antenna technologies. Haigh-Farr is seeking an Entry Level Machinist to join our team. We are in need of a highly motivated individual looking to build or grow a career in the machining trade. This would involve on the job training, all while being an essential part of a growing team. No prior experience is required- just a strDEKA Research & Development
Manchester, NH 03101 • (44.8 miles) • Full Time • 11/19/2026
We're looking for a Machine Learning Engineer who can operate at the intersection of backend engineering and applied machine learning. If you want to design distributed systems, deploy production ML models, and architect scalable data pipelines that make a measurable difference - this is your opportunity, and it starts with the software you design and deliver at DEKA. This role is on-site at DEKA in Manchester, NH. Relocation is not available, local candidates only. How You Will Make an Impact: Design and implement scalable backend services and microservices powering data-intensive, real-world applications Build and deploy production ML models across the full lifecycle from feature engineering and training through evaluation, deployment, and monitoring Develop and maintain event-driven disNew Hampshire Ball Bearings, Inc.
Peterborough, NH • (26.1 miles) • Full Time • $23.00 to $30.00 / hr • 11/19/2026
NOW HIRING: EXPERIENCED CNC OPERATORSHave 10 or more years of CNC experience? New Hampshire Ball Bearings in Peterborough is looking for experienced CNC Machinists to join our growing team!If you have a strong background in CNC machining and are ready to bring your skills to a company that values experience, we want to hear from you. We're Looking for Candidates Who: - Have hands-on experience operating CNC machines. Bring a strong work ethic and attention to detail. Take pride in quality, precision, and teamwork. Are ready to contribute their skills and experience to our team. Ready to Make Your Next Career Move? Bring your experience to NHBB in Peterborough and take the next step in your manufacturing today and join the NHBB team! Essential Duties and Responsibilities: Operate 3+ requireLen - Tex Corporation
North Walpole, NH 03609 • (5.9 miles) • Full Time • $19.00 / hr • 11/18/2026
LEN-TEX WALLCOVERINGS 40 YEARS OF CREATING STUNNING COLOR AND DESIGN Summary: Len-Tex Wallcoverings is seeking a skilled Gravure Operator to join our Print Department. The successful candidate will be responsible for press operation and directing Press Tenders in the production of high-quality wallcovering. Key Responsibilities: Confirm that all correct film color, gauge, and quantity will be run in conformance with the production order. Run order sequence in accordance with printing. Confirm print quality at the beginning of each press run with color masters and stop the run when necessary to correct process problems. Confirm quality at the end of the run layout before wash-up. Accurately fill out roll tickets and daily production reports. Review Tenders' work for accuracy and completenesGS Precision Inc
Keene, NH 03431 • (11.8 miles) • Full Time • $18.00 to $25.00 / hr • 11/18/2026
Description: G.S. Precision manufactures critical components for the Aerospace and Defense industries. With 700 employees across four integrated locations totaling 230,000 sq. ft., we draw on 60+ years of experience and cutting-edge technology to deliver consistent, high-quality results. Our Mission & Values : To provide a proud, caring, and safe environment that allows our team to thrive in delivering value to our customers. We encourage creative thinking and problem solving. We grow our company through open communication, strong leadership, and continuous improvement that benefits our customers, employees, their families, and our communities. Our Vision: To be the most trusted global partner in precision manufacturing and assembly of highly engineered mission critical products, recognizeAlliance Group
West Lebanon, NH • (34.5 miles) • Full Time • $30.00 to $35.00 / hr • 11/18/2026
Description Job Summary: Alliance Group is seeking full-time, experienced Controls Technicians in West Lebanon, NH to join our growing Building Automation/Controls team. This is a field-based position that is responsible for the installation, maintenance, and troubleshooting of various building automation systems. This person will demonstrate in-depth knowledge of HVAC systems, building automation systems, energy management, network communications, and build and maintain strong customer relationships. We are willing to train the right person!! Pay Range: Pay range starts at $30/hour, however , compensation is negotiable and we welcome transparent conversations with qualified candidates. Key Responsibilities Role-Specific Duties: Safely perform scheduled preventive maintenance routines withMomentum Manufacturing Group LLC
Franklin, NH 03235 • (39.4 miles) • Full Time • $30.00 to $36.00 / hr • 11/18/2026
Job Title: CNC Programmer FLSA Status: nonexempt Fabrication is seeking a CNC Setup Machinist / Operator to set up and operate CNC equipment used to machine aluminum extrusion components. This is a hands-on role for someone who can move a job from setup through production while maintaining safety, quality, and output. Key Responsibilities: · Set up CNC machines using approved programs, drawings, and setup instructions. · Install and align fixtures, workholding, and cutting tools. · Establish work and tool offsets and verify setups before machining. · Produce first pieces and obtain required quality approval. · Operate equipment and perform in-process inspections. · Monitor tool wear and make authorized offset and tooling adjustments. · Identify dimensional problems, troubleshoot setup issuGranite State Manufacturing
Manchester, NH 03102 • (43.2 miles) • Full Time • 11/18/2026
Granite State Manufacturing is a leading contract manufacturer of large, complex, precision machined and welded components, supporting the US Navy in building submarines. We specialize in high-mix, low-to-medium volume production, delivering precision, quality, and on-time performance on custom-engineered products. Our capabilities include: Large-format CNC machining Heavy fabrication and welding (MIG, TIG, FCAW, SAW) Assembly, inspection, and testing Program management for complex builds We are known for handling tight tolerances, complex geometries, and demanding customer specifications. Our work environment is supportive, providing what our people need to do great work. Job Summary The Manufacturing Controller owns GSM's accounting close, financial reporting, cost accounting and internaMerrimack Manufacturing
Manchester, NH 03101 • (44.8 miles) • Full Time • 11/17/2026
COMPANY OVERVIEW: Merrimack Manufacturing is a medical device manufacturer located in the Manchester Millyard. We are a growing manufacturing company that will play a crucial part in bringing innovative and life changing products to life. POSITION OVERVIEW: This positon will help manage and improve the overall quality of our supply chain partners, and help ensure that we are compliant to ISO 13485 and FDA requirements as relates to our suppliers and supplied parts. This position will be part of our Quality team, and will work extremely closely with our Incoming Inspection, Engineering and Material Management team. This role will be the primary driver of disposition and closure of Supply based NCR activity. This role will also weigh in on all matters pertaining to quality, engineering and cIgnis Global Recruitment
Keene, NH • (13.1 miles) • Full Time • 11/16/2026
Title: Electrical Engineer Location: Remote or hybrid, in New England. The role carries a regular on-site expectation which suits someone based in New England. For a senior engineer who holds a PE and is set up to work independently, that expectation is flexed, which opens the role more widely across the region. Company: Multi-discipline engineering firm Salary: Up to $160,000, plus a discretionary annual bonus plus up to $10,000 sign on, if required About the work This is consulting-side building services electrical, taken from concept through construction administration. The engineer who designs a system is the one who answers for it on site, so the seat does not split into a drawing job and a site job done by different people. The firm works across roughly 35 states. Around half the worRandstad
Jaffrey, NH 03452 • (25.3 miles) • Full Time • $19.00 to $20.00 / hr • 11/16/2026
Salary: $19 - 20 per hour + none Reference: 1104816-8 Are you a skilled assembler or assembly technician looking for rewarding work with the benefit of consistent pay? Join our network where your precision and expertise are valued. We offer flexible shifts and short-term mandates in light manufacturing, allowing you to choose work that fits your schedule while applying your technical skills to high-quality component assembly. Your responsibilities: - Precision assembly: perform complex or repetitive assembly tasks of components or products following detailed schematics, blueprints, or work instructions. - Tool use: safely utilize various hand tools, power tools, fixtures, and specialized equipment (e.g., soldering irons, crimpers, torque wrenches) as required by the assembly process. - Qua
Aerotek
New Boston, NH • (34.3 miles) • Full Time • 11/16/2026
Job Title: Machinist (Weekend Shift) $26-29/hr + shift differential Job Description This full-time machinist role is based on the machine shop floor, working alongside a small team of experienced machinists to hollow out metal bars to precise diameters for future medical device production. You operate a variety of machining equipment, work largely autonomously, and collaborate with supervisors through regular check-ins to ensure quality, accuracy, and adherence to production standards. Responsibilities Operate machining equipment to hollow out metal bars to specific diameters for use in medical device manufacturing. Work on the machine shop floor as part of a team of approximately 1012 machinists across multiple shifts. Set up, run, and monitor CNC machines, milling machines, lathes, grindPrince Industries LLC
Brattleboro, VT • (23.9 miles) • Full Time • 11/16/2026
Who Is Prince? Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies. At Prince, we don’t just make parts-we solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value. Job Summary This CNC Machinist position at Prince Industries, will involve setting up and operating machine tools to machine metallic and nonmetallicGooch & Housego PLC
Keene, NH 03431 • (11.8 miles) • Full Time • $65,000 to $75,000 / yr • 11/15/2026
Description: ABOUT US G&H is a world leader in optical designing, testing and manufacturing. As experts in the technology of light, G&H works with customers to provide optical systems, assemblies, and components for demanding applications. Headquartered in Ilminster Somerset, UK with primary operations in the USA and Europe, G&H is recognized for the breadth of their acousto-optic, electro-optic, crystal-optic, fiber optic, and precision optic products. G&H is recognized as the preferred source for OEMs in the life sciences, industrial, and aerospace and defense industries, with a history of quality and excellence that dates back over seventy-five years. ROLE The Production Planner is responsible for determining “the what and the when,” coordinating materials, labor and equipment, and prodLaborup
Concord, NH • (39.3 miles) • Full Time • 11/14/2026
We're hiring an experienced Quality Inspector to join an established precision machining and manufacturing operation near Concord, NH. This is a hands-on quality inspection role focused on ensuring precision-manufactured components meet engineering drawings, dimensional tolerances, and customer requirements. You'll work closely with manufacturing, engineering, and quality personnel to inspect components throughout the production process, identify dimensional or quality issues, and help maintain high manufacturing standards. We're looking for someone who is comfortable reading technical drawings, using precision inspection equipment, and working directly with machined components. Responsibilities: Perform receiving, in-process, and final inspections of precision-manufactured components. ReaInnovative Machine
Winchester, NH 03470 • (24.8 miles) • Full Time • $25.00 to $32.00 / hr • 11/14/2026
Benefits: Competitive salary Dental insurance Flexible schedule Free uniforms Health insurance Paid time off About the Role: Innovative Machine in Winchester, NH is looking for a skilled G- code/Conversational CNC Machinist to join their team. If you're passionate about precision machining and thrive in a hands-on manufacturing environment, this is your opportunity to bring your expertise to a company that values craftsmanship and quality. Come be part of a team that takes pride in every part they produce. Responsibilities: Set up, operate, and monitor CNC machines using G-code and conversational programming Write, edit, and optimize CNC programs for mills and/or lathes Interpret blueprints, technical drawings, and engineering specifications Perform in-process inspection using precision meInovar Packaging Group LLC
Milford, NH 03055 • (39.8 miles) • Full Time • $23.00 to $30.00 / hr • 11/14/2026
Digital Press Operator-2nd Shift Monday through Thursday - 2pm to 12am Position Summary Inovar Packaging Group is proud to be one of North America's premier flexographic and digital printing companies, dedicated to the success of our employees and customers. We invest in the latest equipment and technology, continually seeking the best strategies and solutions to deliver cutting-edge, high-quality products. Our culture is customer-driven, team-oriented, and built on win-win partnerships. The Digital Press Operator is responsible for independently operating Domino digital printing equipment to safely produce high-quality labels and packaging products that meet customer specifications, production schedules, and quality standards. This experienced operator serves as a technical resource withiAlene Candles LLC
Milford, NH 03055 • (39.8 miles) • Full Time • $24.00 / hr • 11/14/2026
Who We Are Alene Candles LLC is a private label, contract manufacturer that produces high-quality candles for some of the world’s most recognized retail, boutique, and cosmetic brands. With our headquarters in New Hampshire and locations in Ohio, we’ve been in business for over 25 years. We are passionate about making the best products in the world, making safety our number one priority, and being an insanely great place to work. We have been selected as a "Best Company to Work For" in 2020 and 2021 and 2023 Business of the Year for Manufacturing. The Hours The hours for this position are 3:00 am - 1:00 pm, Monday - Thursday, although the start time may vary depending on the needs of the business. During our busy season we anticipate there being some Overtime available. Busy season is happInovar Packaging Group
Milford, NH 03055 • (39.8 miles) • Full Time • $24.00 to $30.00 / hr • 11/14/2026
**Digital Press Operator-2nd Shift** **Monday through Thursday - 2pm to 12am ** Position Summary Inovar Packaging Group is proud to be one of North America's premier flexographic and digital printing companies, dedicated to the success of our employees and customers. We invest in the latest equipment and technology, continually seeking the best strategies and solutions to deliver cutting-edge, high-quality products. Our culture is customer-driven, team-oriented, and built on win-win partnerships. The Digital Press Operator is responsible for independently operating Domino digital printing equipment to safely produce high-quality labels and packaging products that meet customer specifications, production schedules, and quality standards. This experienced operator serves as a technical resouThe DAVIS Companies
Bedford, NH • (42.6 miles) • Full Time • 11/14/2026
Mechanical Assembler - Contract To Hire The Mechanical Assembler position is available in the Bedford, NH area. This role is essential in a high mix/low volume manufacturing environment, where the company is known for its commitment to quality and continuous improvement. Shift of the Mechanical Assembler: 9/80 every other Friday off. 6a-3:30pm or 7am-4:30pm Pay Rate/Salary of the Mechanical Assembler: $22-$24/hr DOE Responsibilities of the Mechanical Assembler: Perform assembly, calibration, and testing of products and components using assembly drawings and work instructions. Utilize a variety of hand and power tools to complete mechanical assembly tasks. Inspect and test parts and products according to established quality standards. Rotate through mechanical operations to meet team producGEOKON
Lebanon, NH 03766-1345 • (34.6 miles) • Full Time • $25.87 to $29.24 / hr • 11/13/2026
Description: Join us at GEOKON Inc (est. 1979), a proud 100% ESOP company and The World Leader in Vibrating Wire Technology® , in the manufacturing of instrumentation and data logger used in civil, mining and structural engineering projects throughout the world. We continuously seek new and experienced talent to assist us in not only creating and implementing great products that our customers need, but also, to maintain and grow our fantastic culture built on integrity and respect. If our goals and values resonate with you, we would love to connect! As the Machinist II you will set up and operate conventional, special purpose, numerical control (NC) machines and machining centers to fabricate metallic and nonmetallic parts. The ideal candidate will have a strong technical background, excelBalance Professional
Orange, MA • (36.7 miles) • Full Time • 11/13/2026
Quality Inspector Location: Orange, MA Pay Rate: $20.00 - $32.00 per hour Shift : 6AM-2:30PM We are looking for an experienced Quality Inspector to check manufactured parts, welds, and materials to make sure they meet quality and safety standards. Job Responsibilities: Inspect parts, welds, and finished products for defects. Use testing methods (NDT) and measuring tools to check quality. Read blueprints and follow inspection guidelines. Document inspection results and report any issues. Work with production teams to resolve quality concerns. Requirements: High School Diploma or GED. At least 3 years of manufacturing or quality inspection experience. Knowledge of NDT testing methods. Ability to read blueprints and use measuring tools. Strong attention to detail. Certified Welding InspectorNorth Branch Construction
Concord, NH 03301 • (40.1 miles) • Full Time • $27.00 to $32.00 / hr • 11/13/2026
Company Overview: North Branch Construction is a prominent leader in the construction industry, with over sixty years of experience delivering high-quality commercial and residential projects. Renowned for its full-service approach, the company excels as a Construction Manager, Design-Builder, and General Contractor serving New Hampshire and neighboring states. Overview: The QC Specialist works with the job site superintendent and project manager to ensure quality work throughout all phases of construction. This role takes a proactive approach to quality by identifying potential issues before installation, verifying work throughout construction, documenting deficiencies, and confirming that corrective actions are completed. The goal of this position is to reduce rework, improve consistencyAmerican Dream Restaurants LLC
Bennington, VT 05201 • (44.9 miles) • Full Time • 11/13/2026
Position: Production Team Member Employment Type: Part-Time or Full-Time Location: Maine & Vermont $14.42 per hour - $15.10 per hour Are you ready to be a key part of the kitchen team, crafting delicious pizzas and ensuring top-quality food for our customers? American Dream Restaurants, a proud Pizza Hut franchisee, is seeking dedicated Production Team Members to join our team. Whether you’re looking for your first job or a new opportunity, we provide training, growth, and a supportive work environment. What You’ll Do : • Prepare and assemble menu items according to Pizza Hut’s standards and recipes. • Maintain food safety standards, ensuring proper storage, temperature control, and sanitation procedures. • Operate kitchen equipment safely while following all company and OSHA regulations.Kennebec Lumber Co
Grantham, NH 03753 • (27.7 miles) • Full Time • 11/12/2026
General Description: The primary objective of the Maintenance Millwright is to maintain the mill and yard equipment in proper working order. PM work orders will be completed in a timely manner to ensure overall efficiency meets or exceeds the company standards. The daily activities of any maintenance personnel is subject to change due to the needs of the mill therefore, scheduled hours must be flexible. This position may also include running equipment as needed. Responsibilities: Work longer hours on short notice Communicating with the purchaser and Sawmill Manager to further support cost effective ways to manage purchasing and inventory control facility wide: Initiate purchasing of all consumable parts (with PM Parts Purchaser) Working with the PM Parts Purchaser and Sawmill Manager to buPitco Frialator LLC
Bow, NH 03304 • (40.3 miles) • Full Time • 11/12/2026
Description: Located conveniently at the 89 & 93 junction in Bow, NH Pitco manufactures some of the best commercial restaurant equipment available in the market. Pitco began in 1918 and continues to grow and expand. Part of the Middleby Corporation, Pitco Brands are engineered and manufactured under one roof bringing top of the line fryers, pasta cookers and rethermalizers to customers around the globe. From your favorite local haunt to the largest global chain restaurant, our products are beloved for their innovation, ease of use and reliability. Job Summary Oversee a product concept from the idea to the marketplace. Develop, design, and supervise the fabrication and implementation of various components and equipment for complex projects. The Mechanical Engineer is also responsible for thProgressive Precision Manufacturing
Newport, NH 03773 • (18.3 miles) • Full Time • $20.00 to $25.00 / hr • 11/11/2026
Build What Matters at Progressive Manufacturing Location: Newport, New Hampshire | Schedule: Full-time, first shift Is this you? Do you confidently switch between MIG, TIG, and laser welding? Can you read and execute from weldment drawings for simple and complex assemblies? Do you enjoy working with Mild Steel, Stainless, Aluminum, and Aluminized steel ? Are visual alertness , hand dexterity , and attention to detail your trademarks? Are you flexible with assignment changes and open to occasional overtime ? What you’ll handle Production welding on precision sheet metal components and modern gas fireplace parts. End-to-end interpretation of drawings for components and subassemblies. Accurate completion of quality control documentation . Collaboration with a skilled team focused on throughpuConnexion Systems & Engineering, Inc.
Manchester, NH 03102 • (43.2 miles) • Full Time • $20.00 to $23.00 / hr • 11/11/2026
Manufacturing Technicians Manchester, NH 1st and 3rd shift openings $20-$23 Cleanroom experience preferred POSITION OVERVIEW: Manufacturing Technician with excellent attention to detail to undertake the responsibility of preserving the condition, functionality, and safety of production equipment. Applicants must be self-sufficient in safely performing preventive and reactive maintenance activities on various equipment and machinery. Potential candidates are expected to interface with multiple teams and individuals throughout the company to ensure adequate communication and progress with assigned tasks. RESPONSIBILITIES: Assemble plastic and metal components into medical devices in accordance with approved manufacturing procedures. Utilize small hand tools (both manual and electric), manualPcm Innovation Inc
Springfield, VT 05156 • (13.7 miles) • Full Time • $21.00 to $34.00 / hr • 11/10/2026
Lucas Industries, a PCM Innovation Company, is a growing manufacturer that specializes in precision aerospace tooling and parts. We are currently seeking a motivated and reliable advanced CNC machinist. Lucas Industries offers an excellent benefit package including paid time off, holiday pay, company assistance for employee health, vision, dental and disability insurance as well as a 401K retirement plan. Essential Functions/Job Responsibilities: - Operate a variety of 3 & 4 axis CNC machines - Understand engineering drawings and part tolerances - Interpret tooling requirements and set-up instructions - Make offset and program adjustments as required - Perform daily preventive maintenance - Maintain a clean and orderly work area, proper care for company tools - Able to lift up to 40lbs EduStark Tech
Bow, NH • (40.3 miles) • Full Time • 11/10/2026
Job Requirements The ideal candidate will excel in managing key project elements such as scope, cost, schedule, and staffing, while coordinating with external vendors and overseeing contractual commitments. Your proven ability to thoroughly review technical documents, respond to project inquiries, and closely monitor costs and progress is essential. You should also be skilled in efficiently managing all project resources and costs, including staff, contractors, and budgets, and in collaborating with sales and engineering teams to establish project scope and objectives. Work Experience Associate degree in a field related to construction (i.e., engineering, architecture) or equivalent related work experience required. 2 years' of progressive experience in a role performing project managementAdvanced Regenerative Manufacturing Institute Inc
Manchester, NH 03101 • (44.8 miles) • Full Time • 11/10/2026
Overview The Advanced Regenerative Manufacturing Institute (ARMl)IBioFabUSA is a Member-based non-profit organization founded to build the biofabrication industry and transform the future of healthcare. ARMI provides wrap-around commercialization services to companies seeking to bring life-saving regenerative technologies to patients, as well as to innovators seeking to commercialize enabling technologies that will grow the industry's impact. The Impact That You Will Make Quality Assurance Specialists/Senior Specialists are critical to our success. In this role, you will support quality system initiatives, ensuring compliance to federal regulations and internal operating procedures at appropriate stages during the development and manufacture of complex biologic products. Reporting to the DSERVPRO - Cheshire County
North Walpole, NH 03609 • (5.9 miles) • Full Time • $20.00 to $25.00 / hr • 11/8/2026
Benefits: 401(k) matching Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Overview As the front-line representative of the SERVPRO® brand, the Restoration Supervisor demonstrates the company’s Here to Help® commitment to customers and clients. This is done by coordinating, monitoring, and performing work activities on projects to successfully fulfill service needs and facilitate a positive customer experience. Key Responsibilities · Oversee and perform restoration processes as scheduled and ensure quality control · Manage the customer and client experience and overall project satisfaction. Communicate clear expectations to restoration technicians and supervise their activities · Thoroughly document restoration projects sMaxcess International
Keene, NH • (13.1 miles) • Full Time • 11/7/2026
At Maxcess-Tidland, we strive to build products that are durable, designed for ease-of-use and engineered for reliable, long-lasting operation. This experience has led to the development of the industry's most effective winding and slitting systems. FINISH MACHINIST (Manual Lathe) Pay is commensurate with skill/experience. Range is $ per hour $30 to $32 for appropriate skill and experience. *****PLUS 2nd Shift Opportunities with a 2nd Shift Differential of an additional $3 per hour.***** Perform finish turning operations to final dimensions as specified on engineering drawings. SPECIFIC DUTIES Perform finish turning, drilling and tapping to final dimensions as specified on engineering drawings and standard procedures. Set up lathe as required to perform individual finish operations. MaintaPexco Custom Plastics
Athol, MA 01331 • (40 miles) • Full Time • $80,000 to $85,000 / yr • 11/7/2026
**JOB SUMMARY ** The Quality Engineer drives continuous improvement activities in a Custom Plastic Extrusion environment. This position provides extensive and diversified quality engineering and metrology support for manufacturing products and processes while driving systems & completing projects in broad areas of assignment. Basic responsibilities include, Quality/ technical support, metrology, mentoring and training of quality assurance employees, failure investigation, disposition of nonconforming materials, conducting and updating risk analysis documentation defining/refining quality inspection plans, performing data collection, and trending of key metrics, and identifying and addressing supplier quality issues. These responsibilities would include ensuring key performance targets of tABTech Inc
Fitzwilliam, NH 03447-3227 • (27.7 miles) • Full Time • 11/6/2026
As an Electrical Controls Engineer, you play a vital role in the development of application specific products through electrical design, process development, and production readiness for new and existing OEM programs. ABTech creates, builds and supports industry leading precision motion systems. With growth in our OEM programs, we are currently looking to strengthen our engineering team’s ability to support on-site production. Do you take pride in your work? Do you enjoy working in a team atmosphere? Do you want to work for a company with a supportive culture that values your contribution? Are you looking for an opportunity with potential growth? If this describes you, then let’s talk! Specific duties and responsibilities: Create electrical schematics, panel design, bills of materials, worLawrence Fence
Franklin, NH • (39.6 miles) • Full Time • $20.00 to $22.50 / hr • 11/6/2026
Now hiring for for position of Fence Installation Foreman. This is a manual, in-field position involving leadership of fence installation crews. DESCRIPTION AND RESPONSIBILITIES INCLUDE: Min 5 years experience in fence installation and repairs of all types (chain link, ornamental, PVC , temporary, gates, etc.) Basic understanding of construction plans/ blueprints, & safety Layout fence line according to different plans and fence styles Capable of managing crews of 2-3 people Ability to complete project from start to finish with little to no supervision REQUIREMENTS: Must be willing to complete background check and drug test Valid drivers license and reliable transportation to and from job sites Must have own basic hand tools BENEFITS: Performance based raise after 90 days Simple IRA offereSpringfield Hospital Inc.
Springfield, VT 05156 • (13.7 miles) • Part Time • $35.84 to $52.21 / hr • 11/6/2026
Description: The Quality and Risk Management Clinical Specialist will: Act as the lead clinical staff member in Quality, Risk and Compliance department, carrying out a variety of quality and patient safety functions to support the hospitals quality and safety plan and programs. Use clinical nursing knowledge and abilities in data review, to help ensure the continuous evolution of quality and safe care. Please note: This role is 100% on-site and requires employees to work four 6-hour shifts each week. Requirements: Associate Degree in Nursing (ADN) or certificate from an accredited school of nursing Bachelor of Science in Nursing (BSN) from an accredited school of nursing (preferred) 2 years of clinical experience Demonstrated skills in participating in and/or leading quality initiatives inPride Health
Peterborough, NH • (26.1 miles) • Full Time • $80,000 to $90,000 / yr • 11/6/2026
Pride Health is hiring a Quality & Risk Management Coordinator to support our client's healthcare facility in Peterborough, NH. Job Details: Schedule: Monday–Friday, 8:00 AM–4:30 PM Location: Peterborough, NH 03458 Job Type: Permanent Contract Length: FTE Salary Range: $80000k/annually - $90000k/annually *Pay offered is based on experience, expertise, credentialing, and education. Duties: Develops and reviews, evaluates yearly Risk Management Plan and annual goals. Reports on actual and potential claims to professional liability insurance carrier. Works closely with that carrier to minimize legal exposure. Arranges and provides training on risk mitigation; participates in and performs risk assessments organization wide. Follows up on recommendations from the carrier performed risk assessmeChamberlain Machine
Walpole, NH • (5.9 miles) • Full Time • $24.00 to $29.00 / hr • 11/5/2026
We are looking for a skilled CNC Lathe Machinist with demonstrated ability to set up, program and operate CNC machining equipment including vertical milling centers, horizontal milling centers and/or lathes to produce high-quality products. Responsibilities include: Setup, Troubleshoot, operate CNC lathes. Extensive familiarity with CNC program/operation machining centers using FANUC controls and MasterCam. Identify/Execute improvement opportunities in programming, manufacturing methods, tooling, and fixturing. Read and understand machine code. Work with other team members on manufacturing capabilities and production schedules to facilitate production processes. Assist with inspection and validation using basic inspection equipment. Familiarity with GD&T required. Considerable knowledge ofAstronics
Lebanon, NH • (34.6 miles) • Full Time • 11/5/2026
Quality Control Inspector Lebanon, NH United States At Luminescent Systems , we're part of a global aerospace organization dedicated to designing and delivering cutting-edge electronic systems for commercial, business, and military aircraft. Here in Lebanon, NH our team thrives in a culture where teamwork drives innovation and creative problem-solving is part of everyday life. We're united by a shared passion for engineering excellence and a commitment to building advanced systems that help shape the future of aviation. We are looking for a meticulous and dedicated Quality Control Inspector to join our team and ensure our products meet the highest quality standards. As a Quality Control Inspector, you will play a vital role in ensuring all products meet our quality requirements before theyRodney Hunt Inc.
Orange, MA 01364 • (36.9 miles) • Full Time • $20.00 to $27.40 / hr • 11/5/2026
At Rodney Hunt, we are problem-solvers, focused on a common purpose: solving flow control challenges of the water & wastewater industry. As a global technology and engineering leader, we provide solutions for customers in industrial and municipal markets. Job Overview: The Quality Inspector will ensure all products and processes meet company standards and customer specifications. The ideal candidate will have Certified Welding Inspector (CWI) credentials (preferred) and proficiency in Non-Destructive Testing (NDT) methods, including Visual Testing (VT), Magnetic Particle Testing (MT), Penetrant Testing (PT), and Ultrasonic Testing (UT). The Quality Inspector must have a strong understanding of Non-Destructive Testing methods, and proven expertise in inspection techniques for manufacturingCNHES Inc.
Concord, NH • (39.3 miles) • Full Time • $23.00 / hr • 11/5/2026
Utility Machine Operator This is a temp. to hire opportunity with a Concord , NH area heavy Industrial manufacturing facility Shift: 1st shift , 7:00 A.M. to 3:00 P.M. Mon. -Friday + OT as required Pay rate to $23.00 Full benefit package available once hired on direct by client . Position requires pre employment DS and criminal background check Reporting to the Plant Superintendent the Lathe Operator works proficiently with others, but also has the ability to work well independently. The Utility Machine Operator will have the ability to safely and efficiently operate lathe and roll rotating equipment. JOB RESPONSIBILITIES AND TASKS Initial assignment qualities and responsibilities to include: · Trim and Skim rolls to pre-grind specifications · Cut off old rubber, composite, ceramic, PU, anMack Molding
Cavendish, VT 05142 • (22.5 miles) • Full Time • 11/3/2026
Job Title: Molding Technician 2nd Shift Essential Functions Possesses working knowledge of hand tools and machinery. Operates presses and auxiliary equipment. Performs set-ups of silk screening, pad printing, heat staking, milling, sonic welding, press brake, rivet machines, etc. Verifies calibrated torque on guns per work instructions. Performs initial start-ups for sample and production runs. Maintains machinery and tooling to maximize efficiency and product quality. Troubleshoots equipment and machinery for production issues. Optimizes processes to achieve product quality, efficiency, and repeatability. Participates in and supports cost reduction initiatives. Reads and follows ISO procedures; completes daily set-up logs. Maintains a safe, clean, and professional work environment. FosterBond Optics
Lebanon, NH 03766 • (34.7 miles) • Full Time • 11/3/2026
Position Summary Bond Optics is seeking an experienced Optical Fabrication Engineer to join our Lebanon, NH facility as a senior technical contributor to our precision optics production team. This role is the backbone of our conventional fabrication capability the processes that transform raw optical blanks into finished flats, spheres, prisms, and wedges meeting the most demanding defense, aerospace, and scientific program requirements. Unlike a CNC-centric role, this position is built around the physics and craftsmanship of conventional optical fabrication: loose-abrasive grinding, pitch polishing, double-sided lapping and polishing, prism work, and the full measurement and process control framework that supports them. The successful candidate is a deeply skilled fabricator who understanSimbex
Lebanon, NH 03766 • (34.7 miles) • Full Time • 11/3/2026
Simbex is seeking an Electrical Engineer to design and develop embedded electronics for next-generation IoT wearable devices. In this role, you will contribute throughout the hardware development lifecycle, from concept and schematic design through PCB development, board bring-up, testing, and production support. You'll work closely with embedded firmware engineers to create innovative, low-power wearable systems used in demanding real-world environments. Responsibilities Hardware Design & Development Design embedded electronic systems from concept through production Select microcontrollers, sensors, RF components, power management devices, and supporting circuitry Develop schematics and collaborate on PCB layout to ensure manufacturability and performance Participate in design reviews andFieldstone Land Consultants, PLLC
Milford, NH 03055 • (39.8 miles) • Full Time • 11/3/2026
Are you detail-oriented, technically skilled, and passionate about producing high-quality survey drawings? We're looking for a Survey Technician/Drafter to join our team and help transform field data into accurate, professional survey deliverables. What You'll Do · Prepare boundary, topographic, ALTA/NSPS, subdivision, and construction survey drawings. · Process and draft survey data using Carlson software. · Create plats, legal descriptions, easement exhibits, and record drawings. · Work closely with survey crews and project managers to ensure accuracy and efficiency. · Research deeds, plats, and public records as needed. Company Description Fieldstone Land Consultants (FLC) is a family friendly, multi-disciplinary firm with over 15 years in business located in Milford and Keene, NH. We pSagamore
Hanover, NH 03755 • (41.1 miles) • Full Time • 11/3/2026
Sagamore Plumbing & Heating LLC is looking to add to our growing team. The Project Engineer candidate must have technical knowledge of plumbing and HVAC systems. Have strong communication, planning and organizational skills. Ability to work in a busy environment and adapt to frequent project changes. Here at Sagamore, we provide career opportunities to master your craft, earn competitive wages and make a real difference in the lives of our customers and our community. We are looking for employees who take pride in their work and see it as both an art and trade. You will work in an environment where your hard work is rewarded, recognized, and appreciated. Your daily contributions will have a direct effect on the success of the company and your future. If you want to be part of something bigDEW Construction
Manchester, NH 03101 • (44.8 miles) • Full Time • 11/3/2026
DEW Construction has immediate openings for reliable and self-motivated Foremen to work in New Hampshire, based out of our Manchester office. Construction experience is a must, and an exceptional safety record is required. The Foreman is primarily responsible for self-performance crew leadership, assisting with quality control, and supporting the project Superintendent. DEW’s Vision, Mission, and Core Values: Vision Statement: To be the go-to construction partner known for our unwavering commitment to the success of every project. Mission Statement: To build a team of professionals who share our core values and foster a culture where everyone can thrive and grow together. Core Values: Optimism: We share a positive mindset, believing in opportunities over obstacles. Initiative: We are self-R.H. White Construction
Concord, NH 03301 • (40.1 miles) • Full Time • $42.45 to $49.94 / hr • 11/2/2026
Position Summary: Coordinates activities of work crew engaged in the installation, maintenance and repair of a variety of piping and equipment. Installs, maintains and repairs a variety of piping and equipment according to layout plans, blueprints, and other drawings in industrial establishment, using hoists, lift trucks, hand-tools, and power tools: Reads blueprints and schematic drawings to determine work procedures. Essential Functions/Position Responsibilities: Adhere to and promote all Company Safety Policies and the Company Code of Conduct. Coordinate and oversee the work of Millwrights and Laborers assigned to their work crew. Cut, thread, bend and assemble metal and non-metal pipe. Weld, solder, braze, fuse or cement as necessary. Plan sequence of installation and establish/adjustFHR
Concord, NH 03301 • (40.1 miles) • Full Time • 11/2/2026
Don’t submit your resume if you cannot commit to the following in-person interview and HYBRID REQUIREMENTS. 29 Hazen Drive, Concord, NH (Hybrid Role - 3 days/week onsite required) This is a HYBRID position requiring 3 days/week onsite. Only submit LOCAL CANDIDATES willing to work 3 days/week onsite. You will be required to attend an in-person interview if selected to interview. 37.5 hours per week. Our direct client has an opening for Business Analyst 779760 This position is for 6 months, and is the client is located in Concord, NH WE CAN WORK CORP TO CORP OR W2. If you are interested, please submit the following: YOUR CURRENT RESUME YOUR HOURLY RATE Experience in business analysis, including requirements gathering, process modeling, and functional analysis for custom software solutions ReWatts Water
Franklin, NH 03235 • (39.4 miles) • Full Time • 11/1/2026
Scope of Position This skilled individual, as a key member of the Foundry tool making team, is responsible for making repro patterns, screwing, pinning, fitting patterns together, mounting patterns to production plates, core boxes, trim dies, pusher heads and gating the patterns per a layout determined by the Pattern Engineer. This position is based onsite at our Franklin, NH foundry and reports to the Foundry Manager. Primary Job Duties and Responsibilities Set up and operate machine tools, such as milling machines, lathes, drill presses, CNC vertical milling machines, and grinders, to machine castings or patterns. Verify conformance of patterns or template dimensions to specifications, using measuring instruments such as calipers, scales, and micrometers. Plans layout and perform machiniGale Associates
Bedford, NH 03110 • (42.6 miles) • Full Time • $89,600 to $101,200 / yr • 11/1/2026
Gale Associates, Inc. is seeking a Staff Designer to join our Bedford, NH office. Gale is a well-respected national engineering/planning firm celebrating over 62 years in business and rated one of Zweig White’s “Best Firms to Work For” for the past 13 consecutive years. Requirements: Must have a pertinent Bachelor’s Degree (Civil, Construction, or Structural Engineering) and a minimum of 3-5 years in exterior building envelope renovations, analysis, design and construction administration. Experience with moisture intrusion, evaluations, and renovation designs. Excellent writing/presentations skills and proficient computer skills (MS Office, CAD, and Outlook are required). Technical experience in building envelope. Registration path required, an EIT or Professional Engineer’s (P.E.) licenseSocial Influence LLC
Hanover, NH • (40.5 miles) • Full Time • $24.00 to $29.00 / hr • 10/31/2026
Salary: up to $29 Shift: 1st Shift- 7am-7pm, 2nd shift- 7pm-7am Equipment: M2000 press Job Description Job Summary The Web Press Operator is responsible for operating and maintaining web press equipment to produce high-quality printed materials that meet or exceed customer expectations. This role supports daily press operations, ensures product quality, and works collaboratively with team members to meet production goals. Key Responsibilities Operate assigned web press equipment to meet production and quality standards Support daily press operations and assist with team coordination as needed Review job specifications and prepare press for production runs Monitor print quality throughout production including trims, alignment, folds, ink density, color accuracy, and clarity Identify and corMicrospec Corporation
Peterborough, NH 03458 • (27.1 miles) • Full Time • 10/31/2026
Quality Control Inspector 1 - Second Shift Qualifications: a. High school diploma or GED required b. 0–3 years of relevant experience preferred; prior quality experience preferred, within GMP manufacturing environment is a plus c. Demonstrate all Basic Position Skills d. Familiarity with the fundamental concepts of Engineering drawings, inspection and documentation e. Demonstrate initiative and self-motivation to grow and succeed within the position f. Able to work semi-independently after initial training g. Display aptitude and willingness to learn and accept coaching h. Will receive hands-on training to support competency within the role i. Will receive opportunity and training to support growth within QC 2. Basic Position Skills: a. Flexibility – Able to adapt to shifting priorities anNHB Bearings Inc.
Peterborough, NH 03458 • (27.1 miles) • Full Time • $23.00 to $30.00 / hr • 10/29/2026
NOW HIRING: EXPERIENCED CNC OPERATORSHave 10 or more years of CNC experience? New Hampshire Ball Bearings in Peterborough is looking for experienced CNC Machinists to join our growing team!If you have a strong background in CNC machining and are ready to bring your skills to a company that values experience, we want to hear from you. We're Looking for Candidates Who: - Have hands-on experience operating CNC machines. Bring a strong work ethic and attention to detail. Take pride in quality, precision, and teamwork. Are ready to contribute their skills and experience to our team. Ready to Make Your Next Career Move? Bring your experience to NHBB in Peterborough and take the next step in your manufacturing today and join the NHBB team! Essential Duties and Responsibilities: Operate 3+ requireGreenSource Fabrication
Charlestown, NH • (8.2 miles) • Full Time • 10/28/2026
Description Job Title: Production Control Expeditor Department: Production Control | Operations Work Schedule: 9:00am - 5:30pm Location: Charlestown, New Hampshire As a Production Control Expeditor at GreenSource Fabrication, you are responsible for ensuring the smooth and timely flow of materials and work-in-progress (WIP) through all stages of production. This hands-on role focuses on identifying and resolving bottlenecks, expediting late or at-risk jobs, and ensuring orders meet both production and delivery targets. The PC Expeditor plays a key role in job preparation and release, material coordination, and workflow monitoring to support continuous operations. Working cross-functionally with production, maintenance, engineering, quality, and logistics teams, the PC Expeditor actively adPEAK Technical Services Inc.
New Boston, NH 03070 • (34.3 miles) • Full Time • $34.50 / hr • 10/28/2026
Job Summary This is a hands-on leadership role where the individual will assist the Production Supervisor and serve as a highly skilled laser operator. The position involves working as part of a defined workstation team, coordinating work activities, maintaining compliance with procedures, performing quality control checks, acting as a technical lead for first-level problems, moving products in and out of the work area, assisting with training, and operating lasers. This position is for the second shift. Responsibilities Accurately prepare documents, production sheets, and other reports as required by the contracting customer. Participate in Continuous Improvement initiatives and share information with workstation team members. Motivate team members to perform at their best and assign taskNesco Resource, LLC
New Boston, NH 03070 • (34.3 miles) • Full Time • $30.00 / hr • 10/28/2026
Production Team Lead Contract to Hire New Boston, NH Monday - Thursday, 3:00pm - 1:30am (4-10) $30 hr DOE We are seeking an experienced a Production Team Lead to support daily manufacturing operations in a hands-on leadership role. This position works closely with the Production Supervisor while assisting with team coordination, production scheduling, quality control, and training. The ideal candidate will have a strong production background, excellent communication skills, and the ability to lead by example while also performing as a skilled "hands on"operator. This role helps ensure production goals are met, quality standards are maintained, and work is completed safely and efficiently. Daily Activities will include: Assist the Production Supervisor with daily production activities and tYantran LLC
Jacksonville, VT 05342 • (34.6 miles) • Full Time • 10/28/2026
Job Title: Scheduler Administrator Location: Wilmington, Delaware, USA Years of Experience: 10 15 Years Job Summary: We are seeking an experienced Scheduler Administrator to manage and maintain our IBM Workload Scheduler (IWS) environments across development, test, and production systems. The ideal candidate will have a strong background in scheduling administration, incident management, and change support, with a proven track record of ensuring successful job execution and adherence to service level agreements (SLAs). Responsibilities: Administer and maintain IBM Workload Scheduler (IWS) environments across development, test, and production systems. Create, modify, and manage job streams, jobs, calendars, schedules, and dependencies. Monitor daily batch operations to ensure successful jobECom Solutions Inc
Milford, NH 03055 • (39.8 miles) • Full Time • 10/28/2026
Job ID: 11183-1 Job Title: CNC Operator Location: 69 Meadowbrook Drive-Milford, NH 03055 Duration: 5 Months Pay Rate: $19-21/hr on W2 (including all benefits) Shift: Mon-Fri 6:30am-2:30pm POSITION SUMMARY: Entry level position responsible for producing machined parts by operating a computer numerical control (CNC) machine while maintaining quality and safety standards ESSENTIAL DUTIES AND RESPONSIBILITIES: " Load raw materials and unloads completed parts " Operate multiple machines simultaneously " Perform inspection of own parts and co-worker's work " Follow instructions when selecting appropriate tooling and fixtures " Use measurement tools i.e. snap gage, digital calipers, micrometers, optical comparator and other measuring instruments " Adjust tooling & work offsets " Perform minor ediKarwell Technologies
Manchester, NH 03101 • (44.8 miles) • Full Time • 10/28/2026
Roles & Responsibilities: Our client is seeking a Senior Manufacturing Engineer to support manufacturing operations through process improvement, technical documentation, and risk management activities within a regulated production environment. This role will focus heavily on revising and maintaining manufacturing documentation, including work instructions, standard operating procedures (SOPs), and process documentation, ensuring accuracy, compliance, and alignment with current production practices. The engineer will play a key role in identifying and managing operational risks through structured risk management methodologies such as PFMEA and DFMEA, with a strong emphasis on defining and analyzing critical process inputs and outputs to support robust process controls. In addition to core mKatalyst Healthcares & Life Sciences
Manchester, NH 03101 • (44.8 miles) • Full Time • 10/28/2026
Roles & Responsibilities: Our client is seeking a Senior Manufacturing Engineer to support manufacturing operations through process improvement, technical documentation, and risk management activities within a regulated production environment. This role will focus heavily on revising and maintaining manufacturing documentation, including work instructions, standard operating procedures (SOPs), and process documentation, ensuring accuracy, compliance, and alignment with current production practices. The engineer will play a key role in identifying and managing operational risks through structured risk management methodologies such as PFMEA and DFMEA, with a strong emphasis on defining and analyzing critical process inputs and outputs to support robust process controls. In addition to core mBodycote
North Clarendon, VT 05759 • (42.3 miles) • Full Time • $21.00 to $27.00 / hr • 10/27/2026
Production Support Technician North Clarendon, VT, 05759 Bodycote offers: $1,500 Sign-on Retention Bonus. Paid holidays and paid time off. 401k match, Medical, Dental, and Vision Plans for employees and families. Ability to work full-time, 40 hours per week. Training Hours: 2:15 pm-10:15 pm Monday – Friday for up to two months. Must pass a pre-employment drug screen and basic physical. Our people are the heart of our business. As the world’s largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, including some of the best engineers, scientists, and technicians in the industry. Come join our team! Due to the nature of our business and heavy industrial market, Bodycote deems this position to be safety sensitive. Position Summary:TALENIQUE INC
Amherst, NH 03031 • (40.9 miles) • Full Time • $20.00 to $30.00 / hr • 10/26/2026
Job Title: CNC Machinist Direct Hire Pay rate: $20-30 per hour based on experience We are seeking a skilled and detail-oriented Machinist to join our team. The Machinist will be responsible for operating and maintaining machining equipment to produce precision parts and components according to specifications. The ideal candidate will have experience working with a variety of materials, including metals and plastics, and be proficient in reading technical drawings and blueprints. Key Responsibilities: Operate and set up conventional and CNC machining equipment such as lathes, milling machines, grinders, and drills to fabricate parts and components. Interpret technical drawings, blueprints, and specifications to determine machining requirements and tolerances. Select appropriate tools, materRowell's Services
Tilton, NH 03276 • (42.9 miles) • Full Time • 10/25/2026
Who We're Looking For Licensed Septic Inspector Team Player High Quality Customer Service Motivated and Desire to Grow Desired Skills & Experience You’ll Be a Great Fit If You: Enjoy solving problems and take pride in your craftsmanship. Are motivated by new challenges and continuous improvement. Want to build a career , not just fill a position. Appreciate being part of a supportive team where your work is valued. What You’ll Do: Inspect Septic Systems Communicate clearly with customers, dispatch, and team members. Maintain your company vehicle - clean, stocked, and ready for the next call. Represent Rowell’s Services with a professional appearance and attitude. What You’ll Bring: NH Septic Inspector License. In-depth knowledge of septic system design and regulatory standards for inspectiRodney Hunt Inc
Orange, MA 01364 • (36.9 miles) • Part Time • $20.00 to $32.00 / hr • 10/24/2026
At Rodney Hunt, we are problem-solvers, focused on a common purpose: solving flow control challenges of the water & wastewater industry. As a global technology and engineering leader, we provide solutions for customers in industrial and municipal markets. Job Overview: The Quality Inspector will ensure all products and processes meet company standards and customer specifications. The ideal candidate will have Certified Welding Inspector (CWI) credentials (preferred) and proficiency in Non-Destructive Testing (NDT) methods, including Visual Testing (VT), Magnetic Particle Testing (MT), Penetrant Testing (PT), and Ultrasonic Testing (UT). The Quality Inspector must have a strong understanding of Non-Destructive Testing methods, and proven expertise in inspection techniques for manufacturingTrident Systems LLC
Concord, NH 03301 • (40.1 miles) • Full Time • $114,000 to $211,000 / yr • 10/24/2026
Position Title: Principal Electrical Engineer Requisition ID: 1844 Position Location: Fairfax, VA / Concord, NH Position Reports To: Senior Manager, Electrical Engineering Supervises Others: No At Trident Systems Space Electronic Systems (SES) division, we believe in the power of using strong engineering principles to drive innovation and solve complex problems. We foster a culture of rigorous engineering and continuous improvement, leveraging the full knowledge of our organization through collaborative product development processes that include design and peer reviews. We combine our expertise in space electronics with right-sized development processes to create innovative, high-performance space-based electronic systems that meet our customers' evolving needs. We are a mission partner suThe Hiring Method, LLC
Bellows Falls, VT • (6.3 miles) • Full Time • 10/24/2026
Work Setting: Bellows Falls, VT Compensation: $80,500 – $106,000 base salary Bonus: Annual discretionary bonus plus additional discretionary company 401(k) contribution based on company performance Benefits: Medical, dental, and vision effective Day 1, company-paid life insurance, short- and long-term disability, Employee Assistance Program, 401(k) with company match, optional Aflac benefits Position Summary A leading manufacturer of precision automotive drivetrain components is seeking a Quality Engineer to become the primary engineering resource within its Quality department. Reporting directly to the Quality Manager, this role will support manufacturing quality, supplier quality, new product development, and continuous improvement initiatives while serving as the technical backup to thePompanette LLC
Charlestown, NH 03603 • (8.4 miles) • Full Time • $55,000 to $65,000 / yr • 10/24/2026
Manufacturing Engineer The Manufacturing Engineer is responsible for continuous improvement and support of the production of current and future product lines. Focus is on improving manufacturing processes, enhancing product quality, and increasing efficiencies. Collaboration with cross-functional teams to design and implement innovative solutions. Key responsibilities include: Process Development & Optimization – Design, implement, and refine manufacturing processes and tooling to enhance production operations. Standardization – Develop flexible work instructions to standardize fabrication and assembly procedures, especially for semi-custom product lines. Testing & Quality Assurance – Design and implement testing equipment and procedures to ensure design validation, maintain quality controCanam
Claremont, NH 03743 • (15.4 miles) • Full Time • 10/24/2026
Company Description Canam Bridges designs, manufactures and installs steel bridges for major infrastructure contractors across North America. Canam Bridges is a member of Canam Group, which has over 5,100 employees and operates 22 plants in North America, as well as engineering offices in Canada, Romania, India and the Philippines. Job Description MUST BE AUTHORIZED TO WORK IN THE USA SECOND SHIFT Competitive Shift Differential Ensure that all products receive a uniform and complete finish as specified by the customer’s contract specifications; perform such work consistent with corporate mission and values and department financial objectives. Essential Functions: Read finishing requirements from blueprints Apply various types of coatings (paint, zinc, etc.) in accordance with customer specE-Z CRETE, L.L.C.
Swanzey, NH 03446 • (19.1 miles) • Full Time • $20.00 to $24.00 / hr • 10/24/2026
Learn the skills of becoming an Apprentice or Master Precaster and join a trade and career you can be proud of. EZ-CRETE is currently looking to add several solid and reliable team members to our amazing precast concrete production crew. Three shifts available Shift differential of +$2.25/hr between 5pm-5am 40+ Hours a week OT available on an as needed basis Leadership opportunities available for the right candidate Job Description Summary The ideal candidate in this role will perform a wide range of duties in an industrial concrete products manufacturing environment. This individual will be part of a team responsible for safely and efficiently producing premium quality precast concrete products of the highest quality & standards. Responsibilities Strip and clean concrete forms and productHazen And Sawyer
Manchester, NH 03101 • (44.8 miles) • Full Time • $90,000 to $140,000 / yr • 10/24/2026
Hazen and Sawyer is seeking a Mid-Level Electrical Engineer for our Manchester, NH office. As part of our Electrical team you will have exceptional opportunities to provide superior solutions to our clients’ most difficult problems through a variety of water related assignments. Qualified candidates will provide electrical engineering and design for water and wastewater facility projects. Join us in delivering exceptional results and continuous building of our reputation for excellence in the industry. We believe in fostering a dynamic and supportive environment, where you can grow and make a significant impact. So, if you’re ready to join a team that values innovation and excellence, we would love to hear from you! Why Hazen and Sawyer: Founded in 1951 by the son of Allen Hazen (developerRetlif Testing Laboratories
Goffstown, NH 03045 • (39.2 miles) • Full Time • $20.00 to $21.00 / hr • 10/23/2026
Retlif Testing Laboratories is looking to hire a full-time Entry Level Electronic Test Technician (willing to train) to join our Goffstown, NH laboratory. Do you have a background with an interest in and exposure to basic electronics and electrical fundamentals and want a career, not just a job ? This position earns competitive pay , $20-$21 per hour depending on experience. We also offer excellent benefits , including medical, dental, vision, a 401(k) plan, paid holidays, paid time off (PTO), and a tuition reimbursement program . If this sounds like the right opportunity for you, consider applying today! ABOUT RETLIF TESTING LABORATORIES An industry leader for over 40 years, we are an independent testing laboratory that provides compliance testing and engineering services to customers inRobert Greene Inc
Bennington, VT 05201 • (44.9 miles) • Full Time • 11/14/2026
We are looking for a skilled and experienced oil burner service tech to join our team! In this role, you will perform diagnostics, service, and installation of oil burners in residential and light commercial environments. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, soldering, brazing, or welding equipment Install pipe assemblies, fittings, valves, using hand or power tools clean & service oil burners Install and maintain heating systems Professionally interact with customers and clearly communicate work orders andTradeSource MA 1
Baldwinville, MA 01436 • (38.7 miles) • Full Time • $30.00 to $42.00 / hr • 11/7/2026
Sheet Metal Installers Wanted! We are currently looking for skilled Sheet Metal Installers to join our growing team! If you’re motivated, dependable, and ready to advance your career, we want to hear from you. Our company has proudly been in business for over 25 years , and we continue to grow by hiring talented professionals who take pride in their work. We offer opportunities in both residential and commercial projects , giving our team members the chance to expand their experience and skills. What You’ll Do Install sheet metal systems in residential and commercial settings Perform work including hanging, installing, wrapping, insulating , and other related tasks Work with a team to complete projects safely and efficiently Maintain quality workmanship and professionalism on job sites QuaHaffner's
Greenville, NH 03048-4411 • (37.5 miles) • Full Time • $28.00 to $40.00 / hr • 11/3/2026
Description: Oil Burner Service Technician| $28-$40/hr + $2,000 Sign-On Bonus Put your heating service experience to work with a company that makes safety, customers, and its employees a priority. We're looking for a skilled, dependable Oil Burner Service Technician to join our team. What We Offer: $28.00-$40.00 per hour , based on relevant experience and qualifications $2,000 sign-on bonus Medical, Dental & Vision Insurance 401(k) with Company Match Paid Time Off Company-Paid Life Insurance Short-Term & Long-Term Disability Critical Illness and Accident Insurance Employee discounts on gasoline, residential propane, and oil and more... What You'll Do: You'll install, maintain, troubleshoot, and repair residential and commercial heating and cooling systems while providing exceptional customManpower
Tilton, NH 03276 • (43.4 miles) • Full Time • $24.00 / hr • 11/21/2026
Our client, a leading organization in manufacturing and industrial services, is seeking a Machine Operator to join their team. As a Machine Operator, you will be part of the production support team, contributing to efficient operations and ensuring quality standards. The ideal candidate will demonstrate reliability, attention to detail, and a proactive attitude, which will align successfully in the organization. Job Title: Machine Operator Location: Tilton, NH Pay : $24 / hour Shift: 11:00 PM-7:30 AM, Monday-Friday What's the Job? Operate and monitor machinery to ensure optimal performance and safety. Perform manual labor tasks including heavy lifting and moving materials. Load and unload vehicles, ensuring proper handling of materials. Work at heights and operate industrial trucks or tracManufacturing Inc
Greenfield, MA • (38.7 miles) • Full Time • 11/18/2026
We are currently seeking reliable individuals for our Entry Level Production role on the 1st Shift. Are you transitioning from fast food , cashier work, retail , or event support ? Perhaps you have a background as cleaner; janitorial staff, or you are looking to enter manufacturing; production for the very first time. We want you! Whether your past experience is in a warehouse; order packer; assembly environment or something completely different, we welcome your application. This is a fantastic opportunity because absolutely no experience required , and we will train you on everything you need to know to succeed. Compensation & Benefits Competitive Pay: $18.50–$23.50/hr- no experience required ! Comprehensive Benefits: Includes premium health insurance (medical, dental, vision) and eligibiHP Hood
Concord, NH • (39.3 miles) • Full Time • 11/1/2026
Are you a self-driven person looking to advance your career as a high-impact player on a team? If so, we have an exciting challenge for you and your future! Our culture is built on value commitments to innovation, quality, results, integrity, community, people, and collaboration that fosters a strong employee engagement, teamwork, safety and wellness. We offer a competitive benefits package that includes health, dental, vision, wellness programs, employee discounts, retirement plans, tuition reimbursement, ongoing development, advancement opportunities and more. Founded in 1846, today HP Hood is one of the largest and most trusted food and beverage manufacturers in the United States. Our portfolio of national and super-regional brands and licensed products includes Hood, Heluva Good, LactaKFC & Taco Bell
Gardner, MA 01440 • (41.8 miles) • Full Time • 10/28/2026
Build a strong Foundation both professionally and personally with a career at KFC! We’re looking for people who love serving customers, have experience in the restaurant industry and who want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun and friendly service to our customers, KFC is the perfect place to learn, grow and succeed! We offer the following: A commitment to promote from within Training and mentorship programs Tuition reimbursement and scholarship opportunities Reward and recognition culture Competitive Pay Flexible schedules- day, night and evening shifts Free meal each shift Eligibility to accrue paid vacation time Career advancement and professional development opportunities Medical benefits Health andLuxium Solutions, LLC
Milford, NH • (39.8 miles) • Full Time • 11/20/2026
***NEW HIRES ELIGIBLE FOR $750 SIGN ON BONUS*** Hours: Monday-Friday 6:00am - 2:30pm Luxium Solutions in Milford, NH is looking for a Fabrication Technician to join our team! Luxium Solutions is strengthening the health, security, and future of the world by providing leading edge innovative materials and solutions. The team is passionately committed to customer success with high performance materials and inspired solutions that transform technologies developed on a foundation of quality and continuous learning. The Fabrication Technician performs a variety of machining operations such as surface grinding, cylindrical and centerless grinding etc., on a variety of ceramic parts working to very close tolerances. The operation of equipment also includes daily operator maintenance, adjustments,Capital City Subaru
Concord, NH 03301 • (40.1 miles) • Full Time • $40,000 to $80,000 / yr • 10/24/2026
Check and communicate oil level to teammates Ensure tire pressure for proper inflation Inspect and refill fluid levels as necessary Complete vehicle inspection Install a new oil drain plug and a new oil filter Clean and lubricate fittings as needed Providing excellent customer service keeping in mind that our customer’s perspective comes firstCSS Metal Shaped Solutions
Keene, NH • (13.1 miles) • Full Time • $40.00 to $65.00 / hr • 11/12/2026
This position is based in CT. Candidates open to relocation or a 6+ month assingment are encouraged to apply. CSS is willing to assist with housing, meal stipends, and travel expenses to support your transition. Job Title Tool & Diemaker Job Number 51-4111.00 Department Automatic Power Press, New Tools, or Secondary Power Press Reports to New Tools - Director of Engineering / Department Supervisor APP - Department Supervisor / Assistant Supervisor / Senior Tool & Diemaker / Technical Lead SECPP - Department Supervisor / Assistant Supervisor / Technical Lead Fourslide -- Department Supervisor / Assistant Supervisor / Senior Tool & Diemaker / Technical Lead | || | Primary Position Objectives To effectively support operations by maintaining and implementing systems and programs regarding toolW.S. Badger Company
Gilsum, NH • (7.5 miles) • Full Time • 11/7/2026
Job Description: The Production Supervisor supports the Badger Mission and Principles as a member of the Operations team. They are responsible for day-to-day supervision of the Production floor, ensuring that all SOPs for safety and quality are adhered to, and Production goals are met. They have specific responsibility for supervising the Production team members and working cross departmentally with the rest of operations teams, including the scheduling group, and the Quality team. This is a hands-on role: in addition to leading the team, the Production Supervisor regularly works on the floor, operating machines, and performing general production tasks as needed to meet the schedule. Essential Responsibilities: · Directly supervise day-to-day activities of the Production team, ensuring appAVI Foodsystems
Manchester, NH 03102 • (43.2 miles) • Full Time • 11/6/2026
AVI Foodsystems is looking for an energetic and optimistic team member to fill the role of Dining Supervisor at Saint Anselm College in Manchester, NH. This is a full-time position working Sunday through Thursday from 3:00 PM to 11:30 PM. Founded in 1960, AVI Foodsystems has evolved into one of the most respected and trusted food service companies in the nation. Providing comprehensive food services with a focus on the highest quality and freshest ingredients, impeccable service and total value is the reputation we have earned and live up to everyday. Duties & Responsibilities: Oversee front end production Follow opening procedures, including opening and handling cash drawers Comply with all policies and procedures, including but not limited to food and physical safety programs CommunicateConnecticut Spring & Stamping
Keene, NH • (13.1 miles) • Full Time • $40.00 to $65.00 / hr • 11/1/2026
This position is based in CT. Candidates open to relocation or a 6+ month assingment are encouraged to apply. CSS is willing to assist with housing, meal stipends, and travel expenses to support your transition. Job Title Tool & Diemaker Job Number 51-4111.00 Department Automatic Power Press, New Tools, or Secondary Power Press Reports to New Tools - Director of Engineering / Department Supervisor APP - Department Supervisor / Assistant Supervisor / Senior Tool & Diemaker / Technical Lead SECPP - Department Supervisor / Assistant Supervisor / Technical Lead Fourslide -- Department Supervisor / Assistant Supervisor / Senior Tool & Diemaker / Technical Lead | || | Primary Position Objectives To effectively support operations by maintaining and implementing systems and programs regarding toolSAE Safety Solutions
Templeton, MA 01468 • (42.5 miles) • Full Time • $20.00 to $25.00 / hr • 11/17/2026
Overview We are seeking a skilled and motivated Press Brake Operators to join our team in Templeton, MA. In this role, you will play a crucial part in our manufacturing process, ensuring precision and quality in the bending of metal components. If you have a keen eye for detail and a passion for working with machinery, we want to hear from you! Responsibilities Set up and operate press brake machines to bend and shape metal parts according to specifications. Read and interpret blueprints, drawings, and work orders to determine job requirements. Conduct regular inspections of machines and tools to ensure optimal performance and safety. Adjust machine settings as necessary to achieve desired tolerances and finishes. Collaborate with team members to meet production goals and deadlines. MaintaLignetics, Inc.
Jaffrey, NH 03452 • (25.3 miles) • Full Time • $21.00 to $25.86 / hr • 11/14/2026
DAY SHIFT POSITION DETAILS: Shift Team A1: 5 am to 5 pm, (WK1=Sun-Tue, WK2=Sun-Wed, 12-hours per day) Shift Team A2: 5 am to 5 pm, (WK1=Wed-Sat, WK2=Thur-Sat, 12-hours per day) Salary: $21.00/hr. and up to an additional $2.86/hr. from our Monthly Bonus Incentive Program! Monthly Bonus Incentive KPI Metrics Include: Safety, Attendance, Production and Downtime NIGHT SHIFT POSITION DETAILS: Shift Team B1: 5 pm to 5 am, (WK1=Sun-Tue, WK2=Sun-Wed, 12-hours per day) Salary: $21.00/hr.+ $2.00/hr. shift differential, and up to an additional $2.86/hr. from our Monthly Bonus Incentive Program! Monthly Bonus Incentive KPI Metrics Include: Safety, Attendance, Production and Downtime **Pre-employment background check and drug screen required. Lignetics, Inc offers clean, renewable solutions. We have 30PDS Tech
Charlestown, NH 03603 • (8.4 miles) • Full Time • $20.00 / hr • 11/13/2026
Metal Micro-Finish and Blend Repair Technician Our mission is simple: deliver parts that look as exceptional as they perform. Join us in North Charlestown, NH, to perfect surfaces, restore contours, and dial in micro-finishes that pass the toughest inspections. Grow Your Craft From your first shift, you’ll work shoulder-to-shoulder with experts who care about precision and mentorship. You’ll master how to choose the right belt grit and wheel durometer, how to measure and correct stock removal, and how to bring out a consistent finish on complex geometries. Core Impact Shape consistent outside radii using air-driven tools. Enhance micro-finishes in fillet radii and airfoil regions; eliminate cutter marks with deburring and finishing wheels. Remove machine tool marks and belt scratches; repaBrattleboro Retreat
Brattleboro, VT 05301 • (26.3 miles) • Full Time • $19.44 to $30.27 / hr • 11/12/2026
Description: Job Summary: Operates, maintains, tests, monitors, adjusts and documents the energy generation and distribution system in and connect to the Power Plant, in a safe, reliable and efficient manner providing electricity, steam and hot water to the hospital complex for environmental and process needs. Security duties, as needed, including maintenance and cleaning of Brattleboro Retreat vehicles, snow removal and assist in testing fire alarm system. ESSENTIAL DUTIES AND RESPONSIBILITIES: Core Competencies Operates, maintains, monitors, adjusts and documents all power plant equipment & systems in accordance to manufacturer’s recommendations, Brattleboro Retreat requirements and all State, Federal, and local regulations. Performs assigned preventative maintenance duties to ensure effVail Resorts
Ludlow, VT • (26 miles) • Part Time • $20.00 / hr • 11/10/2026
Create Your Experience of a Lifetime! Come work and play in the mountains! Whether it’s your first-time seeing snow or you were born on the slopes, joining our team means discovering (or re-discovering!) a passion for the outdoors while building lifelong connections with teammates and guests from around the world. With 40+ resorts across 3 continents, you can join our team for a season or stay to build a career. From day one, you'll receive some of the highest compensation rates in the industry, free pass(es) along with free ski and snowboard lessons, 40% retail discounts, the chance to grow through Epic Service - our leading training and development experience, and wellness benefits to fuel your success. Hiring for our seasonal positions occurs on a rolling basis. Applications will be accBarrel One Collective
Windsor, VT 05089 • (25.6 miles) • Full Time • $19.00 to $21.00 / hr • 11/4/2026
Barrel One Collective | Windsor, Vermont Full-Time | Production / Manufacturing About Barrel One Collective Barrel One Collective is a family of established New England beer brands and hospitality businesses, including Harpoon Brewery and Long Trail Brewing Company. We make and sell great beer, create memorable experiences, and bring iconic New England brands together to help them grow and thrive. At our Windsor, Vermont brewery, our production team is responsible for making, packaging, and preparing our beer to head out into the world. We take pride in doing things the right way, working safely, and supporting the people around us. About the Packaging Operator Role We're looking for a Packaging Operator to join our brewery production team in Windsor, VT. This is a hands-on manufacturing rMaple Leaf Foods Inc.
Turners Falls, MA 01376 • (39.2 miles) • Full Time • 11/3/2026
Company Description About Us We’re a carbon-neutral food company on a mission to Raise the Good in Food-through better nutrition, safer workplaces, humane animal care, and sustainability efforts that protect our planet. We also work to reduce food insecurity in Canada. Join us and help build a better future. Job Description Pay: $18.54-$20.60 per hour Job description: Production – Packing L1 – Turners Falls, MA Location: 153 Industrial Blvd Turners Falls MA 01364 Job Type: Full-Time Posting Date: 6/5/2026 | Application Deadline: 8/1/2026 Shift Details: Monday- Thursday – with occasional Friday | 630am -630PM if applicable (shifts may be subject to change) 2026-TF-03 Reason for vacancy: Existing Headcount About Us Greenleaf Foods, a leading producer of plant based healthy foods, is lookingAptyx
Jaffrey, NH 03452 • (25.3 miles) • Full Time • $17.00 to $19.00 / hr • 10/31/2026
Performs a variety of tasks involved in the manufacturing and assembly of medical devices in a regulated production environment. The Manufacturing Operator is trained on all assigned tasks and is responsible for following established written procedures and work instructions to ensure product quality and compliance. Performance will be evaluated based on quality, productivity, attendance, adherence to company policies and procedures, compliance with regulatory and safety requirements, and overall contribution to team objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES Safety & Compliance Aptyx places the highest priority on employee safety. All employees are responsible for maintaining a safe work environment and adhering to all established safety policies and procedures. Unsafe behavior or f