Please Accept our Privacy Policy
Smurfit Westrock
South Brunswick Township, NJ 08810 • (33.4 miles) • Full Time • $23.53 / hr • 10/30/2026
Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. Converting Utility Dayton NJ 3rd Shift (10pm-6am) Pay: $23.53 an hour Overtime: frequent overtime up to 4 hours daily The opportunity Primary job duties will include but not limited to safely perform a wide range of tasks supporting the manufacturing areas, production, conducting quality checks, material set-up, and maintaining a clean and organized workspace. The ideal candidate will hailocatum
Budd Lake, NJ 07828 • (33.5 miles) • Full Time • $110,000 to $138,000 / yr • 11/1/2026
Manufacturing Quality Manager, Medical Device ISO 13485 Budd Lake, NJ | Full-time | On-site, 10% travel | $110,000 to $138,000 a year Lead manufacturing quality for a medical instrumentation manufacturer. Must-Haves 7+ years medical device manufacturing 3+ years supervising ISO 13485, 21 CFR 820, ISO 14971 CAPA, NCR, audits, validation Science or engineering degree What You'll Do Own the quality system Lead the quality team Make disposition decisions Resolve production issues Nice-to-Haves Master's degree ASQ certification Compensation and Benefits $110,000 to $138,000 a year About the Company A medical instrumentation manufacturer.Refresco
Wharton, NJ 07885 • (26.6 miles) • Full Time • 11/17/2026
Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it’s what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’DSJ Global
New Brunswick, NJ • (25.1 miles) • Full Time • 11/17/2026
Production Planner \n\n \n Production Planner \n New Brunswick NJ \n $80,000 to $100,000 + Bonus + Strong Company Benefits \n \n\n A very well respected national Food org is looking to hire a New Production Planner for their flagship manufacturing site, to help propel the business to its next phase of growth. This role will develop and manage production schedules within a fast-paced, 24/7 manufacturing environment. You will use SAP to align production capacity, materials, inventory, labor, and customer demand while partnering with Manufacturing, Procurement, Logistics, Quality, Operations, and Supply and Demand teams. \n\n Plant Director to help deliver a turnaround program for one of its Flagship facilities, and help springboard the business to its next level of growth. Along with developJimmys Gourmet Bakery LLC
Carteret, NJ 07008 • (12.9 miles) • Full Time • $33.00 to $40.00 / hr • 11/17/2026
Description: We are seeking an experienced Overnight Maintenance Industrial Electrician Mechanic to join our team and support the efficient operation of our production facility. This individual will be responsible for troubleshooting, repairing, and maintaining production machinery and equipment to minimize downtime and ensure smooth daily operations. The ideal candidate will have strong electrical and mechanical troubleshooting skills, experience working with industrial production equipment, and the ability to perform preventative maintenance and equipment repairs in a fast-paced manufacturing environment. 3rd Shift (11 PM - 7 AM) Requirements: Troubleshoot, diagnose, and repair electrical, mechanical, pneumatic, and hydraulic systems on production equipment. Perform routine preventativeEAD Management Services Inc
Parsippany, NJ 07054 • (16.4 miles) • Full Time • 11/17/2026
Join EAD to help solve complex controls and automation challenges in industrial facilities. EAD supports projects across industrial manufacturing facilities, including food processing, pharmaceutical manufacturing, and parcel handling environments. This role offers the opportunity to lead a controls engineering team across projects of varying size and complexity in a fast-paced, multi-discipline, and practical engineering setting. The Controls Engineer delivers accurate, practical, and high-quality controls engineering for industrial and manufacturing facilities. This role is responsible for control system design, programming, field support, troubleshooting, and cross-discipline coordination. EAD expects strong performance at every level: Associate Controls Engineer is expected to performStrides Pharma Inc
Spring Valley, NY 10977 • (25.5 miles) • Full Time • $78,000 to $85,000 / yr • 11/17/2026
About Strides Headquartered in India, Strides is a leading pharmaceutical company focused on the development and manufacturing of high-quality finished dosage formulations and is among the world’s largest manufacturers of soft gelatin capsules. Backed by world-class manufacturing facilities, a cutting-edge R&D center in Bangalore, and a strong global commercial network, Strides has built a reputation for delivering innovative, affordable healthcare solutions worldwide. With a significant presence across North America, we are committed to improving access to quality generic medicines through a growing portfolio of approved products, strong distribution partnerships, and state-of-the-art facilities that meet the highest regulatory standards, including those of the U.S. FDA. POSITION SUMMARYEngineering Consulting Company
White Plains, NY • (26.6 miles) • Full Time • $75,000 to $90,000 / yr • 11/17/2026
Mechanical Engineer Engineering Consulting Firm in White Plains, New York. We specialize in the design of HVAC, Electrical, Plumbing and Fire Protection systems for residential, commercial, industrial and institutional clients. We offer exciting projects in a team oriented atmosphere. The ideal candidate will have experience designing commercial and residential HVAC Mechanical systems. Experience with heating and cooling calculations, ductwork, piping and HVAC equipment selection is preferred. Responsibilities: - Field surveys of buildings and systems. - Performance of computer driven load calculations. - Design and creation of drawings, diagrams, sketches and schematics using AutoCad. - Review and analysis of construction documents. Qualifications: - Minimum 1 year in an Engineering envirCelltrion Branchburg, LLC
Somerville, NJ 08876 • (31.9 miles) • Full Time • $129,000 to $215,000 / yr • 11/17/2026
Celltrion is a leading biopharmaceutical company that specializes in research, development and manufacturing of innovative therapeutics. We are committed to delivering innovative and affordable medications to promote patients’ access to advanced therapies. We have been at the forefront of biotherapeutic development uncovering new ways of targeting the drivers of disease by creating next-generation biologics and small molecule products. Celltrion Branchburg, LLC is a subsidiary of Celltrion USA, established in 2025 following Celltrion USA’s acquisition of Eli Lilly’s drug substance (DS) manufacturing facility located in Branchburg. By linking robustlocal manufacturing capabilities with an existing direct sales network, we aim to generate greater synergies across our operations. Looking aheaU.S. Dynamics Corporation
Amityville, NY 11701-2622 • (37.3 miles) • Full Time • $24.00 to $42.00 / hr • 11/17/2026
Description: JOB TITLE : Machinist/Programmer Job Summary : We are seeking a skilled Machinist/Programmer to join our team. The ideal candidate will have experience operating and programming CNC machines to produce precision parts. You will be responsible for reading blueprints, setting up machines, programming CNC controls and inspecting parts to ensure they meet specifications. Perform the activities of an expert level CNC programmer and shop leader to machine, program, estimate, and coordinate various products per established facility processes, including set-up, fabrication, and inspection using the operations of CNC mills, lathes, and other equipment. Perform as a key contributor for the new knowledge of programs and projects. Apply knowledge of policies, procedures, and the practicalOrca Bio
Princeton, NJ • (39.8 miles) • Full Time • $80,000 to $100,000 / yr • 11/17/2026
\n \n More than one million people in the United States today are fighting blood cancer. While a traditionalallogeneic stem cell transplanthas been the best hope for many, the transplant itself can prove fatal or lead to serious conditions, such as graft vs. host disease. Orca Bio is a late-stage biotechnology company redefining the transplant process by developing next-generation cell therapies with the goal of providing significantly better survival rates with dramatically fewer risks.With our purified, high-precision investigational cell therapies we hope to not only replace patients' blood and immune systems with healthy ones, but also restore their lives.\n \n \n \n \n \n We are establishing manufacturing operations on the East Coast to ensure the consistent and reliable delivery of oJavin Machine Corp
West Babylon, NY 11704 • (39.9 miles) • Full Time • $35.00 to $45.00 / hr • 11/17/2026
Benefits: 401(k) Health insurance Paid time off Competitive salary Opportunity for advancement Job Summary: Javin Machine Corp. is seeking a Class 1 Lathe Machinist to join our team. The ideal candidate is a motivated self-starter, and is prepared to set up and operate a variety of CNC lathes and mill-turn machines. Responsibilities: Setting up and operating CNC lathes to manufacture aerospace parts Reading and interpreting blueprints/drawings Providing ideas to improve manufacturing and make suggestions for process improvement Calculate dimensions and tolerance using measuring instruments Perform routine maintenance on machinery, if needed Light/simple program writing, if needed Skills: At least 5 years’ experience in tight tolerance manufacturing required Familiarity with Lathes and FanuEverforth, Cybercoders
Clifton, NJ • (7.9 miles) • Full Time • 11/17/2026
CMM Programmer CMM Programmer Position Overview We are seeking a skilled CMM Programmer to develop, validate and maintain coordinate measuring machine inspection programs and processes that ensure dimensional compliance of precision and cast components. The role focuses on translating engineering drawings and GD&T into robust CMM routines, producing clear inspection documentation, and supporting manufacturing and quality teams to improve product quality and measurement efficiency. Key Responsibilities Develop and validate CMM programs for production and prototype parts using measurement best practices Interpret engineering drawings and apply GD&T principles to define inspection strategies and measurement routines Create, maintain and optimize inspection plans, routines and fixtures for CooThermo Plastic Tech Inc
Union, NJ 07083 • (8.8 miles) • Full Time • $30.00 to $45.00 / hr • 11/17/2026
Thermo Plastics is a leading manufacturer in the plastics industry, known for quality, innovation, and reliability. We are currently seeking a skilled Machine Maintenance Mechanic/Vacforming/Thermo Forming machineset up to join our maintenance team and help keep our production running smoothly. Responsibilities: Troubleshoot, maintain, and repair plastic processing machinery and equipment Perform preventative maintenance on machines to ensure optimal performance Assist with equipment setup, changeovers, and calibration Maintain maintenance logs and records Ensure safety standards are followed at all times Requirements: Mechanical experience in an industrial or manufacturing setting Familiarity with plastic processing equipment is a plus Strong problem-solving skills Ability to work indepenThe Okonite Company
Ramsey, NJ 07446 • (21.2 miles) • Full Time • $55,000 to $60,000 / yr • 11/17/2026
JOB SUMMARY: The Planner – Customer Service is responsible for assisting customers in obtaining status information and coordinating production activities to meet delivery objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES: •\tProvide order status information to field sales force •\tMaintain files on manufacturing orders •\tCoordinate and expedite orders •\tAssist plants with production problems (length approvals, raw materials, etc.) •\tContribute to continuous improvement and cost-reduction programs •\tAssist sales offices with possible factory order changes (quantities, lengths, schedules, etc.) and obtain proper paperwork from plants (test reports, corrected packing lists, etc.) •\tCoordinate the ordering of special materials with the Purchasing Department and the plants •\tProduce weeklEarthCam
Upper Saddle River, NJ • (21.5 miles) • Full Time • 11/17/2026
Who We Are EarthCam is aglobal leader in webcam technologythat gives construction teams real-time visibility into their jobsitesanytime, anywhere. Our solutions support project monitoring, documentation, promotion, and jobsite security across construction projects worldwide. Our platform delivers live video, time-lapse recordings, progress tracking, and site security, powered by smart AI tools that turn visual data into useful insights for better decision-making. Since creating the first construction webcam in 1996, EarthCam has been trusted on major projects like One World Trade Center, SoFi Stadium, and the Panama Canal Expansion, and integrates with tools such as Procore, Autodesk, and Bentley. We’re a collaborative, hands-on team that builds our technology in-house and works closely acCOASTAL ENGINEERING LLC
Greenwood Lake, NY 10925 • (32.3 miles) • Full Time • $120,000 to $160,000 / yr • 11/17/2026
Description: About Coastal Engineering Coastal Engineering is a specialized VOSB marine construction firm delivering complex, high-quality waterfront and underwater infrastructure projects along the East Coast. We are driven by a commitment to innovation, safety, sustainability, and executional excellence. Coastal Engineering is seeking an Engineer Diver to provide engineering and technical expertise for underwater inspection, assessment, and marine construction projects. This position combines professional engineering judgment with commercial diving experience to evaluate the condition of marine structures and provide practical recommendations for repair, rehabilitation, and construction. The Engineer Diver will serve as a field-based technical leader, performing and overseeing underwaterLT FOODS AMERICAS INC
Dayton, NJ 08810 • (33 miles) • Full Time • 11/17/2026
Description: Quality & Food Safety Technician Reports directly to the Food Safety and Quality Manager. The Quality Control Technician is responsible for the quality, food safety, and aesthetics of the product. The QC Technician follows established processes and ensures adherence to Good Manufacturing Practices (GMP), food safety standards, Safe Quality Food (SQF) requirements, and product quality standards. What we offer: Monday- Friday (must be flexible to Saturdays) day shift Sponsored Benefits (Medical, Dental, Vision, Life, FSA) after 30 days. Annual Performance Reviews Paid time off after 30 days (up to 26 days off annually!) Employee discount on the company's product Quarterly bonus Monthly company-sponsored lunches Key Responsibilities (or Principal Accountabilities): Responsible foSpartech
Stamford, CT 06902 • (36.7 miles) • Full Time • 11/17/2026
Process Engineer - 2nd Shift & 3rd Shift Stamford, CT How can you make a difference at your job and can have the opportunity to grow? Join the Stamford – Spartech Team! In Stamford, Spartech manufactures acrylic sheets that are used in the aerospace as well as in security (bullet-resistance), displays, acrylic furniture and laser protection amongst other applications. Our products can be seen in many airplanes, fighter jet canopies, helicopters, in the banks for protection at the teller windows, tanning beds, etc.. We have a unique process that utilizes technology, as well as the skills and knowledge of our employees, to make quality products. We strive to supply the highest quality acrylic sheet with the best possible service. Job Summary Drive process improvement, root cause analysis andM.C. Dean, Inc
Stamford, CT • (38 miles) • Full Time • $32.00 to $46.00 / hr • 11/17/2026
Overview \n About M.C. Dean \n\n M.C. Dean is Building Intelligence®. We design, build, operate, and maintain cyber-physical solutions for the nation’s most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 9,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. \n\n Why Join Us? \n\n Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core valuesagility, expertise, and trustwe foster a collAdvanced Technology Services
Carlstadt, NJ • (5.8 miles) • Full Time • 11/17/2026
Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties / Responsibilities: Promotes and adheres to the ATS safety culture. Ensures compliance with regulatory requirements and ATS policies and procedures. Partners with internal/external customer for engineered solutions to improve reliability and throughput. Identifying opportunities for Capital Expenditures for equipment replacement (develop and communicate ROI). Champions operating systems, critical elements, aCommtech Services Inc
Clifton, NJ • (7.9 miles) • Full Time • $24.00 to $35.00 / hr • 11/17/2026
Quality Control Inspector Position Overview We are seeking an experienced, detail-oriented Quality Control Inspector to join our manufacturing team. This position is responsible for inspecting incoming materials, in-process production, and finished products to ensure compliance with engineering drawings, specifications, purchase requirements, workmanship standards, and established quality procedures. The ideal candidate has hands-on experience in a manufacturing quality environment, strong mechanical inspection skills, and the ability to accurately interpret engineering drawings and GD&T requirements. This role requires someone who is organized, analytical, self-motivated, and comfortable working independently while collaborating with Quality, Engineering, and Manufacturing teams. ScheduleKearfott Manufacturing
Pine Brook, NJ 07058 • (14.1 miles) • Full Time • $35.00 to $48.00 / hr • 11/17/2026
Sr. Optical Polisher (2nd shift) \n Overview \n As a Sr. Optical Polisher, you will perform precision polishing and cleaning operations on a wide variety of high finish and critical dimensioned glass parts. \n Essential Functions: \n \n Set up and operate a wide variety of bench equipment to polish and clean diverse glass parts. \n Perform critical deburring and polishing operations on hard-to-handle parts \n Work from drawings, specifications, and written & verbal instructions to perform the duties assigned. \n Check work with a variety of electro-mechanical optical and manual measuring equipment. \n Operate small electric hand and bench tools to perform duties. \n Use a variety of proper grit, lapping, and polishing compounds to perform duties. \n Performs any other tasks directed by ManVantageSpecialtyChemicals
Warren, NJ 07059 • (22.3 miles) • Full Time • 11/17/2026
Company Description Vantage provides natural solutions to our customers’ technical performance and marketing needs through a unique combination of chemistry, application expertise and service. Underpinned by our broad portfolio of formulations, ingredients and actives that are built on a backbone of sustainable oils, fats and their derivatives, Vantage targets selected markets and applications including personal care, food, surface treatment, agriculture, pharma, and consumer and industrial performance. Vantage is headquartered in Deerfield, IL., operates in 11 countries worldwide and employs more than 1,000 talented professionals focused on delivering exceptional customer experiences with every interaction. We are a dynamic people-centered organization where you’ll be part of a collaboratTeksky
New Brunswick, NJ 08846 • (23.5 miles) • Full Time • 11/17/2026
Position Overview Sseeking a Senior Controls Engineer to lead the design, programming, integration, and commissioning of automation systems for custom industrial mixing, blending, drying, and material processing equipment. This position will play a critical role in developing machine control systems that support our customers' manufacturing operations across pharmaceutical, food, chemical, additive manufacturing, and specialty materials industries. The successful candidate will work closely with mechanical engineers, project managers, manufacturing personnel, and customers to develop reliable, user-friendly automation solutions from concept through startup. This role requires a hands-on engineer who can balance technical expertise, project execution, and customer interaction while supportiCornerstone Building Brands
North Brunswick, NJ • (28.1 miles) • Full Time • 11/17/2026
Company Description CornerstoneBuilding Brands is aleadingmanufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 teammembers at manufacturing,distributionand office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG)responsibilityare embedded in our culture. We are comCAVA - Main Street North Brunswick
North Brunswick, NJ 08902 • (28.8 miles) • Full Time • $17.50 / hr • 11/17/2026
\n \n \n Team Members \n At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. \n We foster a culture built on five core values: \n \n \n \n Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others. \n Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious. \n Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt. \n Passion for Positivity: We greet each day with warmth and possibility. \n Collective Ambition: We have highResource Management Industries, LLC
Colts Neck, NJ 07722 • (32.2 miles) • Full Time • 11/17/2026
Resource Management Industries Lead Operator Location: Central New Jersey Job Type: Full-Time Benefits: Dental, Medical, PTO, Retirement, Vision Job Description Resource Management Industries (RMI) is seeking an experienced and dependable S2 Lead Wastewater Operator to oversee daily service operations, perform maintenance and repairs on commercial treatment systems, and coordinate the ordering of replacement parts and supplies. The ideal candidate will possess strong mechanical troubleshooting abilities, organizational skills, and the ability to independently manage day-to-day operations while providing leadership and support to other service personnel. Key Responsibilities Perform inspections, routine maintenance, troubleshooting, and repairs on septic systems and related equipment. DiagnGreen Thumb
Hackettstown, NJ • (37.6 miles) • Full Time • 11/17/2026
The Role The Quality Assurance Manager is responsible for managing and enforcing all quality assurance and (QA) operations at GTI's production facilities. Specifically, the Quality Assurance Manager will play a key role in upgrading or developing and implementing GTI's quality assurance policies and standard operating procedures.This role will include the development and implementation of Product Quality programs, adherence to HACCP (risk) programs, product quality tracking systems, ingredient management programs, allergen and sanitization management programs, product safety practices. The individual will ensure that the team is following all GTI operating procedures and any quality regulations for federal, state, county, etc. Responsibilities Oversee the facility's QA department and ensurDEKRA SERVICES INC
Princeton, NJ 08540 • (38.9 miles) • Full Time • 11/17/2026
SENIOR PROCESS SAFETY TESTING ENGINEER DEKRA Services, Inc. | Full-Time; Regular | Exempt | On-site | DEKRA Process Safety 113 Campus Dr Princeton, NJ 08540 In compliance with applicable pay transparency requirements, the application window for this position is expected to close on November 30, 2026, subject to change based on business need. A Day in the Life and the Impact You’ll Make As a Senior Process Safety Testing Engineer, you will work directly with customers to understand their processes and design custom calorimetry tests. A successful candidate will have a strong understanding of the principles of chemical reactions and laboratory calorimetry techniques, including ARC, RC-1, and/or VSP2. The Senior Process Safety Testing Engineer may also conduct testing and report information uThorlabs
Newton, NJ • (39 miles) • Full Time • 11/17/2026
At Thorlabs, we design and manufacture components, instruments, and systems that transform the world by identifying, enabling, and accelerating key photonics (i.e., light-based) technologies. Backed by a dedicated workforce of more than 3,000 employees worldwide, Thorlabscontributes to cutting-edge research and real-world innovation. Whether you're early in your career or bringing years of experience, you’ll find opportunities to grow, take ownership, and make meaningful contributions from day one. We know every employee brings unique talents and perspectives that fuel our success, and we seek driven individuals who are excited to make an impact in a fun, fast-moving culture. The Machine Shop Purchaser Planner is responsible for coordinating and planning the production schedules in our macKinsley Group
Newark, NJ 07102 • (3 miles) • Full Time • $85,000 to $130,000 / yr • 11/16/2026
Kinsley Power Systems is seeking an Industrial Sales Engineer to add to their team! The Industrial Sales Engineer's main objective is to sell industrial power generation applications including related equipment (transfer switches, switchgear, load banks, fuel tanks, etc.) to end-users, engineers, electrical contractors, municipalities, government applications and OEMs, among others. Kinsley Power Systems, a family-owned business, has been an industry leader in generator service, sales and rentals for over 60 years. If you want to join a growing company with strong family values, a great culture, a company where you are valued for your hard work and have opportunities to grow – then look no further, come join our Kinsley family! Responsibilities: Responsible for pursuing new project opportuKalon Executive Search
Newark, NJ 7102 • (3.4 miles) • Full Time • 11/16/2026
Director of Quality | Dietary Supplement Manufacturing About the Role We're partnering with a growing supplement manufacturer that is looking for a Director of Quality to own its quality and compliance function. You'll set the strategy and stay close to daily execution, making sure every product that ships is safe, consistent, and fully compliant. You'll work closely with production, R&D, regulatory, procurement, and customers, and you'll be the face of quality during regulatory inspections and customer audits. ** This is an in-person position just outside of New Jersey ** What You'll Do Build, maintain, and continuously strengthen the quality management system, ensuring alignment with FDA dietary supplement cGMP regulations (21 CFR Part 111) Establish and enforce SOPs and quality policiesEquinix
Secaucus, NJ • (3.4 miles) • Full Time • 11/16/2026
Who are we? Equinix is the world’s digital infrastructure company®, shortening the path to connectivity to enable the innovations that enrich our work, life and planet. A place where bold ideas are welcomed, human connection is valued, and everyone has the opportunity to shape their future. Joining our operations team means being at the center of everything – maintaining and evolving critical infrastructure that powers the digital world and delivers real impact for our customers, communities and society. You’ll find belonging, purpose, and a team that welcomes youbecause when you feel valued, you’re empowered to do your best work. Job Summary Data Centers are considered Critical Facilities, supporting hospitals, laboratories, financial institutions, and public safety systemsoperations wherArdurra Group, Inc.
Secaucus, NJ 07094 • (3.4 miles) • Full Time • 11/16/2026
RVE (an Ardurra company) is seeking a Mechanical Engineer (MEP) – Facilities to join our team in Secaucus, NJ. Maintaining and upgrading buildings poses an ongoing challenge for clients who need to keep their facilities and systems operating safely, reliably and cost-effectively. The foundation of our design approach is energy savings, including finding alternative energy sources when viable. Our professionals bring together engineering and strong economic and management principles to design and upgrade heating, air conditioning, ventilation and other systems for our K-12, higher education, healthcare, hospitality and industrial clients as part of new construction or renovation projects. Our staff has expertise in wind, solar, geothermal and combined heat and power (cogeneration) technologQuest Events LLC
North Bergen, NJ 07047 • (5.8 miles) • Full Time • $18.00 to $19.00 / hr • 11/16/2026
Description: Position Summary We are seeking a skilled and detail-oriented Cutter to join our fabrication team. In this role, you will be responsible for accurately measuring, marking, and cutting materials for custom, large-scale drapery and fabrication projects. The ideal candidate has strong sewing and fabrication experience, takes pride in precision craftsmanship, and thrives in a fast-paced production environment. Working closely with the production team, you'll help ensure every project meets our high standards for quality, accuracy, and on-time delivery. Responsibilities Measure, mark, and cut fabrics and other materials according to project specifications. Execute complex cutting for custom, large-scale drapery and fabrication projects. Read and interpret work orders, floor plans,RECRUIT 1
Hillside, NJ • (6.9 miles) • Full Time • 11/16/2026
Printing Press / Flexible Packaging Manufacturing \n Location: Hillside, NJ 07205 Shifts: Day Shift & Night Shift Pay: $18.00–$21.00 per hour, based on experience Position: Full-Time | On-Site \n Recruit1 is hiring dependable, detail-oriented Quality Control Inspectors for a printing and flexible packaging manufacturing facility in Hillside, New Jersey. \n We are looking for individuals who take pride in their work and can identify printing defects before they become costly production problems. \nResponsibilities\n Inspect printed materials during production and verify quality against approved samples and customer specifications. Check for color inconsistencies, misregistration, smudges, streaks, missing print, and other defects. Inspect both sides of printed materials when required. IdentOsmo
Elizabeth, NJ • (7.1 miles) • Full Time • $80,000 to $100,000 / yr • 11/16/2026
Who we are at Osmo: Osmo is the Olfactory Intelligence company, on a mission to give AI a sense of smell to improve the health and wellbeing of human life. Why? Our sense of smell has the ability to delight us, protect us, and heal us. Olfactory Intelligence has applications across industries including fragrance, manufacturing, security, medicine, and more. We believe in the power of automation and thoughtfully applied AI/ML to solve problems beyond the reach of human intuition alone. We're headquartered in Elizabeth, NJ, with an additional office in Somerville, MA. We provide complimentary shuttle service from Brooklyn and Newark, NJ. About the Role Osmo's QC function is being built from the ground up, and this seat is where day-to-day quality judgment lives. You'll run testing and sampliDamascus Bakery
Clifton, NJ • (7.9 miles) • Full Time • $16.00 to $17.00 / hr • 11/16/2026
DAMASCUS BAKERIES is a 3rd Generation Bakery founded in 1930. We have three baking facilities: Brooklyn, New York; Newark, NJ, Clifton NJ. Our products include Pitas, Lavash, Wraps, Flatbreads, Pizza Crusts, Breadsticks, Sandwich Buns, and more. We have a very strong- and even historic- presence in the Metro New York market. Since 2000, we have expanded our capacity and distribution to the National Market, supplying and partnering with many of America's top QSR's, Casual Dining Restaurants, Food Service Establishments, Retail, Club and Natural Stores, Institutions, Distributors, and other Bakeries. For many of our customers, we have been the Product Development arm that has created some of America's most Successful and Award-Winning Flatbreads. We are an SQF company that currently employsCibo Vita Foods
Paterson, NJ 07512 • (11.7 miles) • Full Time • $18.00 to $20.00 / hr • 11/16/2026
Is This You? Do you spot a defect in seconds and love proving it with crisp documentation? Do you enjoy collaborating with suppliers to keep materials compliant? Are audits, checklists, and data your tools for driving consistency? If you’re nodding along, our Totowa, NJ team wants to meet you. Role Snapshot Inspect inbound goods against defined specifications and acceptance standards. Record and report nonconformances, defects, and discrepancies immediately. Partner with suppliers to resolve issues and ensure ongoing compliance. Conduct periodic audits of receiving processes to maintain quality rigor. Assist in creating, refining, and implementing QA protocols. Keep thorough inspection records and quality assessment documentation. Share insights and best practices during team discussions tRubber And Silicone Products
Fairfield, NJ 07004 • (13.2 miles) • Full Time • $85,000 to $125,000 / yr • 11/16/2026
Benefits: 401(k) matching Competitive salary Health insurance About the Role: Manufacturing Company in Fairfield, NJ is looking for a skilled and experienced Urethane Manufacturing Foreman to lead our production team. This is a hands-on leadership role where your expertise in urethane manufacturing will directly drive quality, efficiency, and team success. If you thrive in a fast-paced manufacturing environment and take pride in your craft, we want to hear from you! Responsibilities: Oversee day-to-day urethane manufacturing operations, ensuring production schedules and quality standards are met Supervise, mentor, and coordinate production floor team members to maximize efficiency and output Monitor urethane mixing, casting, molding, and curing processes to ensure product consistency EnforUnifoil Printing
Fairfield, NJ 07004 • (13.2 miles) • Full Time • $45,000 to $55,000 / yr • 11/16/2026
Quality technicians are responsible for conducting testing procedures during manufacturing processes to ensure that products comply with quality standards. \n Quality Technician duties: \n \n Reports to QC Manager \n Responsible for testing/inspection of in process products and finished goods in timely fashion \n Maintains all records and retains of in process products and finished goods \n Creates testing sheets for in process and finished material \n Approves production runs based on visual inspection and testing results \n Has authority to make “go - no go “ quality decisions on products \n Provides information and data for customer COAs \n Assists Technical Director with testing and other technical issues \n Maintains and updates customer specifications \n Coordinates all non-conforminGarg Consulting Services, Inc.
Woodbridge, NJ 07095 • (16.3 miles) • Full Time • $115,000 to $145,000 / yr • 11/16/2026
Electrical Engineer (Transportation/Transit - Lighting & Facility Power) Location: Woodbridge, NJ Employment Type: Full-Time | On-Site Salary: $115,000–$145,000 annually, commensurate with experience, plus a signing bonus and comprehensive benefits. About Garg Consulting Services, Inc. Garg Consulting Services, Inc. is a multi-disciplinary engineering firm specializing in railroad and transit infrastructure projects throughout the Northeast. Founded in 1990, Garg employs over 100 professionals and delivers high-profile federal and state transportation projects across Connecticut, New York, New Jersey, and Pennsylvania. We are seeking an experienced Electrical Engineer to support complex electrical engineering design efforts and support large-scale transportation and infrastructure programsTerrAscend
Boonton, NJ • (18.2 miles) • Full Time • $20.00 / hr • 11/16/2026
\n \n TerrAscend Corp. is a leading TSX-listed company with operations across North America, including Pennsylvania, New Jersey, Maryland, Ohio, and California through TerrAscend Growth Corp., as well as retail operations in Canada. \n \n \n TerrAscend operates The Apothecarium and other dispensary retail locations, along with scaled cultivation, processing, and manufacturing facilities across its core markets. Our portfolio includes well-known brands such as The Apothecarium, Cookies, Kind Tree, Legend, State Flower, Wana, Cuue, One, and Valhalla. \n \n \n \n \n \n \n Sound like weed be a good fit? Here’s where you come in.\n \n \n \n \n \n The Edibles Production Technician will assist with the manufacturing process of gummy edible products for TerrAscend.\n \n \n \n \n \n \n \n \n WhereTRU MFG CORP.
Norwood, NJ • (18.8 miles) • Full Time • 11/16/2026
Bergen County, NJ - Job opportunitiesfor Machinist with experience setting up and/or programming CNC equipment. Our shop includes CNC Mills, CNC Lathes, multi axis Mill Turns and Swiss type screw machines. Manual machinists are also welcome to apply. Willing to train. Benefits plus 401K. Please respond with cover letter and resume.Hummel Croton, Inc
South Plainfield, NJ 07080 • (19.8 miles) • Full Time • $1,300 to $1,800 / wk • 11/16/2026
Benefits: 401(k) Health insurance Paid time off Free uniforms About the Role: Hummel Croton, Inc. is looking for a skilled Industrial Mechanic to join our team in South Plainfield, NJ! This is a hands-on opportunity to keep critical industrial equipment running at peak performance in a fast-paced manufacturing environment. If you love solving mechanical challenges and take pride in your craft, we want to hear from you. Responsibilities: Perform preventive and corrective maintenance on industrial machinery and equipment Diagnose mechanical, hydraulic, and pneumatic system failures and execute timely repairs Inspect equipment regularly to identify wear, damage, or potential breakdowns Disassemble, repair, and reassemble pumps, motors, gearboxes, conveyors, and related components Read and intKarbon Engineering Services, LLC
Edison, NJ • (19.9 miles) • Full Time • $70,000 to $130,000 / yr • 11/16/2026
Job Summary: Karbon Engineering has an outstanding opportunity for a talented and motivated Mechanical or Electrical Commissioning Engineer. Candidates must have 2-6 years of experience in operation / testing of: Mechanical Candidate: HVAC systems including water-cooled or air-cooled chiller plants, primary-secondary pumping systems, variable-flow primary-only pumping systems, air handling units, fans and control systems or equivalent mechanical systems. Electrical Candidate: UPS Systems, Generators, Switchgear Controls Must have good communication skills, be computer literate and be able to travel. Experience with Facility Grid a plus. Bachelor’s degree is desirable; equivalent experience will be considered. Responsibilities: Responsibilities include preparation of commissioning plans, prCertaPro Painters Of Morristown, NJ
Morristown, NJ 07960 • (19.9 miles) • Full Time • $43,500 to $50,000 / yr • 11/16/2026
Benefits: Major holidays off One week vacation year one 401(k) matching Bonus based on performance Company car Flexible schedule Free food & snacks Free uniforms Health insurance Opportunity for advancement Paid time off Training & development CertaPro Painters of Morristown is seeking a reliable and motivated Painting Production Coordinator to join our team. We are a fast-growing company that likes to have fun! This is a position that will provide the right individual with an opportunity to learn directly from the owner and grow with the company. We have an amazing set of core values that we take seriously, they include: deliver what you promise, have pride in what you do, respect the individual, practice continuous improvement, and embrace possibilities. This role requires a customer-focLiberty Personnel Services, Inc
Morris Plains, NJ 07950 • (20 miles) • Full Time • $70,000 to $105,000 / yr • 11/16/2026
HVAC Engineer – MEP Consulting Firm \n A well-established MEP consulting firm in New Jersey is seeking an HVAC Engineer with 1–5 years of experience to join its growing team. \n Responsibilities: \n \n \n Design HVAC systems for commercial, institutional, and other building projects. \n \n Prepare mechanical drawings, specifications, and calculations. \n \n Coordinate with electrical, plumbing, and other design disciplines. \n \n Assist with project design, code compliance, and construction documentation. \n \n Qualifications: \n \n \n 1–5 years of HVAC design experience with an MEP consulting firm. \n \n Bachelor’s degree in Mechanical Engineering or a related field. \n \n Familiarity with HVAC design standards, building codes, and industry software. \n \n Strong communication and coordinBiztech Inc
Denville, NJ 07834 • (21.3 miles) • Full Time • $25.00 to $34.00 / hr • 11/16/2026
We are seeking an experienced CNC Lathe Machinist to join its growing production team. This is a hands-on opportunity for a dependable, detail-oriented machinist with strong CNC lathe setup and operating experience. Previous CNC milling experience is highly desirable but not required. The ideal candidate takes pride in producing high-quality precision-machined components, demonstrates strong mechanical aptitude, and can work independently while contributing to a team-oriented manufacturing environment. Key Responsibilities: Set up and operate CNC lathe machines to manufacture precision components according to engineering drawings and specifications. Perform machine setups, tooling changes, offsets, and adjustments to maintain accuracy and efficiency. Read and interpret blueprints, technicaGenScript
Piscataway, NJ • (23 miles) • Full Time • 11/16/2026
About GenScript Founded in 2002 in New Jersey, GenScript Biotech Corporation accelerates innovation in biotech and healthcare by providing researchers and companies with the building blocks needed to develop groundbreaking treatments and products. Guided by its mission to Make People and Nature Healthier Through Biotechnology, and its role as a well-recognized biotechnology company, GenScript has a team of approximately 6,165 employees and has served more than 200,000 customers across over 100 countries and regions. Job Title: Equipment Engineer Location: Piscataway, NJ (Fully Onsite) Reports to: Manager II, Engineering Compensation: The estimated salary range is $65,000 - $75,000, dependent upon experience level. Job Overview: The Equipment Engineer reports to the Manager II, EngineeringRecloud IT
Piscataway, NJ 08854 • (23 miles) • Full Time • $26.00 / hr • 11/16/2026
ReCloud IT is a fast-growing IT Asset Disposition (ITAD) startup delivering secure, scalable, end-to-end infrastructure lifecycle solutions to customers. \n\n We provide comprehensive IT asset management services for organizations and corporations. including logistics management, equipment refurbishment, data erasure, product re-marketing, downstream recycling, and sustainability reporting for our clients. We are headquartered in Piscataway, NJ and service North American markets. \n\n Job Title: Lead ITAD Technician / Quality Control Specialist \n\n Job Location: 100% ON-SITE in Piscataway, NJ. \n\n Department: Operations \n\n Reports To: Operations Manager \n\n Position Summary \n We are seeking an experienced Lead ITAD Technician to oversee the testing, repair, quality control, and proceDaburn Electronics & Cable
New Brunswick, NJ 08846 • (23.5 miles) • Full Time • 11/16/2026
We are presently looking for an Electrical Engineer with a practical experience in the industrial controls field and a strong background in PLC/HMI programming. You will work for the Novotics and SICO Systems Control divisions of Daburn. Novotics and SICO design, program and build industrial automation controls for a variety of clients and end-users in Middlesex NJ. Requirements/Experience: Minimum 3 years experience in industrial controls and automation PLC and HMI programming Analog controls and PID Loops (instrumentation) Motor controls (motor starters and VFDs) Able to work independently or as a team member Practical knowledge of NEC Primary Responsibilities: Design control systems per customer specifications PLC and HMI programming Test & troubleshoot control systems Write functionalEuropastry USA
New Brunswick, NJ 08901 • (25.1 miles) • Full Time • $38.00 to $40.00 / hr • 11/16/2026
JOB SUMMARY: This position is responsible for troubleshooting and performing major mechanical repairs with minimal supervision to ensure proper performance of equipment on site, including motors and refrigeration rooms to maximize up time. Training of staff as required and coordinating with other mechanics on duty for repairs and ensuring all assigned work is timely completed. ESSENTIAL RESPONSIBILITIES & ACCOUNTABILITIES: Troubleshoot and repair industrial production equipment, electrical systems, and mechanical components. Diagnose equipment failures using electrical schematics, technical manuals, PLC diagnostics, and testing equipment. Perform preventive, predictive, and corrective maintenance on manufacturing equipment. Troubleshoot PLC-controlled systems, sensors, motors, VFDs, and inWoodard & Curran
Rye Brook, NY • (29.7 miles) • Full Time • $90,000 to $105,000 / yr • 11/16/2026
\n Woodard & Curran is an employee-owned engineering, science, and operations firm dedicated to clean water, a safe environment, healthy communities, and happy people. We foster an inclusive, collaborative culture that supports professional growth, flexibility, and meaningful work, empowering our employees to make a lasting impact on our clients, communities, and the planet. \n \n \n \n \n \n Woodard & Curran is seeking a dynamic, client-focused SCADA Automation & Controls Engineer to join our team, supporting projects in the Rye Brook, NY area. In this role, you’ll work with municipal and industrial clients on water, wastewater, and remediation projects focused on automation and control systems. \n You’ll have the opportunity to work on complex, integrated SCADA solutions, supporting projIgnis Global Recruitment
Greenwich, CT • (33.3 miles) • Full Time • 11/16/2026
\n Title: Electrical Engineer \n \n \n Location: Remote or hybrid, in New England. The role carries a regular on-site expectation which suits someone based in New England. For a senior engineer who holds a PE and is set up to work independently, that expectation is flexed, which opens the role more widely across the region.\n \n \n Company: Multi-discipline engineering firm \n Salary: Up to $160,000, plus a discretionary annual bonus plus up to $10,000 sign on, if required \n \n About the work \n This is consulting-side building services electrical, taken from concept through construction administration. The engineer who designs a system is the one who answers for it on site, so the seat does not split into a drawing job and a site job done by different people. \n The firm works across rouAtmos-Tech Industries
Deal, NJ 07723 • (35.3 miles) • Full Time • $17.00 to $20.00 / hr • 11/16/2026
Essential Duties & Responsibilities Assemble filtration units, housings, components, and related equipment according to work instructions, drawings, and production specifications Read and interpret assembly instructions, cut sheets, blueprints, and production documentation Verify parts, dimensions, materials, and hardware prior to assembly Use hand tools, power tools, measuring devices, and assembly equipment safely and efficiently Perform quality inspections and functional checks to ensure completed products meet company standards and customer specifications Identify, document, and report defects, material shortages, or production issues Maintain clean, organized, and safe workstations and production areas Assist with packaging, labeling, and preparing completed assemblies for shipment SuWindows By Toll
Stamford, CT 06902 • (36.7 miles) • Full Time • $20.00 to $28.95 / hr • 11/16/2026
Production Systems & CRM Coordinator Windows by Toll | Stamford, CT | In Office Are you the person who sees a repetitive task and figures out how to automate it? Windows by Toll is looking for a tech-savvy, process-minded professional to help organize and automate the production side of our window and door replacement business. We already use Lead Perfection CRM. We need someone who can learn its capabilities, understand how our jobs move from sale through installation, and turn that process into clear workflows, reliable reminders, and useful reporting. You will work directly with our owner and Production Manager to improve our systems while supporting daily production operations. Success means fewer manual steps, accurate job information, and a team that knows what needs to happen next.United Fire Protection
Union, NJ 07083 • (8.8 miles) • Full Time • $25.00 to $35.00 / hr • 11/15/2026
United Fire Systems division of United Fire Protection Corp is looking for a reliable, mechanically inclined Manufacturing Technician to join our team in Union, NJ. If you enjoy working with your hands, assembling equipment, and solving mechanical problems, this could be a great opportunity for you! What You'll Do Assemble fire protection equipment and mechanical components. Read and follow assembly drawings and instructions. Use hand tools, power tools, and manufacturing equipment. Maintain tools and keep the work area organized. Complete work orders accurately and on time. Assist with product testing and prototype development. Follow safety and quality procedures. What We're Looking For Experience in mechanical assembly, manufacturing, or equipment repair. Strong mechanical skills and atJob&Talent
Wharton, NJ 07885 • (26.9 miles) • Full Time • $29.00 to $30.00 / hr • 11/15/2026
Maintenance Tech (Production Facility) Direct Hire! Pay Rate: $27 - 30/hour Job Overview (Production Facility): • Perform preventive and corrective maintenance on production equipment. • Execute production line changeovers and assist in new equipment installations. • Maintain detailed records of maintenance activities and parts usage. • Supervise mechanics in the absence of the Plant Engineer. • Ensure a safe work environment by inspecting lines and reporting hazards. Essential Requirements (Production Facility): • Explain your production line changeover process, including tooling inspection and storage, while ensuring minimal downtime. • Describe diagnosing and repairing an urgent electrical or mechanical machinery breakdown safely and quickly under pressure. • Must have used checklists fMetallized Carbon Corporation
Ossining, NY 10562 • (34 miles) • Full Time • $25.00 to $30.00 / hr • 11/15/2026
Position Summary The Industrial Maintenance Mechanic is responsible for maintaining, troubleshooting, repairing, and installing manufacturing equipment and facility systems within a carbon graphite manufacturing environment. This position supports production operations by ensuring equipment reliability, minimizing downtime, and maintaining a safe and efficient workplace. The ideal candidate will have strong mechanical, hydraulic, pneumatic, and industrial maintenance experience within a manufacturing environment and be comfortable working on a wide variety of production equipment, CNC machinery, ovens/furnaces, dust collection systems, pumps, compressors, and facility systems. Essential Duties and Responsibilities Troubleshoot, diagnose, and repair industrial manufacturing equipment and maSolid Rock Recruiting LLC
Newark, NJ • (3.4 miles) • Full Time • $150,000 to $185,000 / yr • 11/15/2026
\n \n Senior Mechanical Project Manager (Traveling) \n Nationwide Projects | Full-Time Travel Required \n Confidential Opportunity – Partnered with a Leading Mechanical Contractor \n We are partnered with a reputable, national mechanical contractor seeking a Traveling Senior Project Manager to lead large-scale HVAC and mechanical construction projects across the U.S. \n \n \n \n \n \n About the Role \n As a Senior Project Manager, you will lead projects from preconstruction through closeout, ensuring safety, quality, budget, and schedule are consistently achieved. This is a high-impact role for someone who thrives in dynamic environments and enjoys working on diverse, complex projects \n \n \n \n \n \n Key Responsibilities \n \n Lead and enforce jobsite safety and compliance culture \n ManTTI Environmental
Bloomfield, NJ 07003 • (5.3 miles) • Full Time • $75,000 to $90,000 / yr • 11/15/2026
Industrial Hygiene Project Manager – Industrial Hygiene Division TTI Environmental, Inc. is an integrated environmental services contractor and consulting firm serving government, industrial, commercial, academic, financial, and private clients nationwide. Headquartered in Moorestown, New Jersey, TTI’s team of experienced, certified, and licensed professionals work directly with clients to provide sound solutions to environmental challenges. TTI is seeking a full-time Project Manager to join our Industrial Hygiene Division. Facility based assignments are anticipated for this role. Current Industrial Hygiene certifications are preferred, and candidates should have related project experience with Asbestos, Lead Paint, and Indoor Air Quality investigation. The ideal candidate will reside in NDES MICRO PRECISION GROUP LLC
Paterson, NJ 07501 • (11.3 miles) • Full Time • $20.00 to $25.00 / hr • 11/15/2026
Job is in New Jersey. Recruiters and out of the country candidates, please don't contact this job poster. Compensation based on Experienced and skills Essential job functions include: Completing multiple setups, including adjustments to tool lengths and offsets as necessary Reading blueprints Years of experience as a HAAS CNC lathe/mill setup or operator preferred Performing first article inspections Capability to learn additional machine types such as Kiwa High school diploma or equivalent Required Experience Experience machining aluminum and stainless steel Mastercam programming knowledge preferred. Practical knowledge of math and geometry Computer skills Dependability Great attitude Wear a mask. Job Type: Full-timeAdel-Lawrence Associates, Inc.
East Hanover, NJ • (13.5 miles) • Full Time • 11/15/2026
This job is posted on behalf of Adel-Lawrence Associates, Inc. by Top Echelon. PLESE NOTE: Need to be a U.S. Citizen with the ability to communicate clearly in English. Only local NJ/NYC area people will be considered. Must reside within commuting distance of the East Hanover New Jersey area. This is a Field Service position with a company vehicle, so a good driving record is required. Questions (YES or NO answers only please): Can you troubleshoot electronics to the component level?: Do you have experience with PLCs and Motor Controls?: Do you have Field Service experience?: Do you have an 18 month technical certification or an Associates Degree?: Can you work well with minimal supervision?: To qualify for this position you need to have knowledge/experience with Panel Wiring, PLCs. HMI, MDocupace Technologies
Holmdel, NJ 07733 • (26.1 miles) • Full Time • $80,000 to $90,000 / yr • 11/15/2026
Description: Docupace is seeking a remote Production Support Engineer to work our overnight shift, midnight to 9 AM ET , Tuesday to Saturday. Please note: This role is open to candidates who live in the U.S. and are authorized to work in the U.S. for any employer. We cannot offer visa sponsorship or transfer, and this role does not support OPT or STEM OPT. Summary of Position: The Production Support Engineer (PSE) works the overnight shift and keeps Docupace production systems and client data processing running smoothly across the Docupace products the team supports. PSEs are a blend of pragmatic operators and software craftspeople who apply sound engineering principles, operational discipline, and mature automation to our operating environments and the Docupace codebase. As a Docupace ProRedbirdjobs
West Milford, NJ • (28.2 miles) • Full Time • $140,000 to $165,000 / yr • 11/15/2026
A recently renovated and expanded companion animal practice in northern New Jersey is hiring an experienced Veterinarian. The hospital provides medical, surgical, and dental care with up-to-date equipment and a clean, friendly culture built on courtesy, patience, and service. Key Highlights: Base of $140,000 to $165,000 plus 20% production No expected late stays or on-call Weekday hours with half-day Saturdays Recently renovated facility and modern equipment Focus on work-life balance Path to partnership About You: DVM or VMD from an accredited school Valid New Jersey veterinary license, or eligible General practice experience preferred Benefits: $140,000 to $165,000 base plus 20% production Relocation assistance Health, dental, vision, and retirement coverage CE allowance and paid CE daysCentral Garden & Pet
Monroe Township, NJ • (33.5 miles) • Full Time • 11/15/2026
Description The Quality Control Technician will play a critical role in ensuring products are packaged correctly and meet quality standards before they are shipped to customers. The primary objective of the Quality Control Technician - Manufacturing is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. This position runs Monday - Friday, with the following shifts: 2nd Shift: 2:00 PM - 10:30 PM 3rd Shift: 10:00 PM - 6:30 AM KEY RESPONSIBILITIES Perform thorough inspections of raw materials, components, and finished products to check for defects, non-conformities, and deviations from quality standards. Work closely with production teams to ensure that manufacturing processes are in compliance with quality standards and are carrieScale Microgrid Solutions
Ridgewood, NJ • (15.9 miles) • Full Time • 11/14/2026
\n The Role \n \n We are looking for a Controls Engineer to join our product engineering team and help design, build, and commission microgrids. \n You will report to our Chief Technology Officer and work a hybrid work schedule from one of our offices in either Oakland, CA, Santa Monica, CA, Ridgewood, NJ, or NYC. \n \n Key responsibilities will include: \n \n Design, develop, and program PLC-based electrical control systems \n Specify, purchase, and troubleshoot control system hardware and instrumentation (field-mounted and panel-mounted instruments) \n Read, understand, and develop control system design documents (Functional Specifications, User’s Manual, and engineering reports) \n Troubleshoot and resolve any issues related to electrical control systems to minimize downtime and improveZing Recruiting
Butler, NJ • (20.7 miles) • Full Time • 11/14/2026
NOW HIRING: Quality Control Inspector (QC) \n Location: Butler, NJ 07405 Pay Rate: $21–$25 per hour ( shift /differential) Shifts: 2nd & 3rd Shift Schedule: Monday–Friday Shift Schedule\n \n 2nd Shift: 3:00 PM – 11:30 PM \n 3rd Shift: 11:00 PM – 7:30 AM \n \nJob Summary\n We are seeking a detail-oriented Quality Control Inspector to inspect and measure metal parts, calibrate measuring equipment, and ensure products meet quality standards and specifications. Responsibilities\n \n Inspect metal parts during production and upon completion. \n Perform first article, in-process, final, and incoming material inspections. \n Calibrate and maintain measuring and inspection equipment. \n Use micrometers, calipers, indicators, gauge pins, thread gauges, and optical comparators. \n Read and interpretHUDSON CITY CONSULTING LIMITED LIAB
Kearny, NJ 07032 • (0 miles) • Full Time • $23.00 to $26.00 / hr • 11/14/2026
Quality Control Inspector | Electrical & Mechanical Assembly $23-$26/hour | Full-Time- Direct Hire Kearny, NJ Are you an experienced Quality Control Inspector who takes pride in finding issues before products reach the customer? We are partnering with a growing manufacturer of critical electrical and industrial equipment seeking a detail-oriented professional to join their quality team. This is an excellent opportunity to work with complex mechanical and electrical assemblies in a clean, team-focused manufacturing environment where quality, safety, and craftsmanship are highly valued. Schedule Monday-Friday 7:00 AM - 4:00 PM Occasional overtime available What You'll Do As a Quality Control Inspector, you'll perform inspections throughout the production process to ensure products meet enginCAVA - Edgewater Commons
Edgewater, NJ 7020 • (9.1 miles) • Full Time • $17.50 / hr • 11/14/2026
\n \n \n Team Members \n At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. \n We foster a culture built on five core values: \n \n \n \n Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others. \n Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious. \n Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt. \n Passion for Positivity: We greet each day with warmth and possibility. \n Collective Ambition: We have highAEP Engineering,LLC
Roseland, NJ 07068 • (10.9 miles) • Full Time • $40.00 to $90.00 / hr • 11/14/2026
REMOTE POSITION, BUT CANDIDATE MUST RESIDE WITHIN 25-50 MILES OF THE POSTED LOCATION AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work , based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are requireEnglewood Lab, Inc.
Paterson, NJ 07512 • (11.7 miles) • Full Time • $55,000 to $70,000 / yr • 11/14/2026
Company: Englewood Lab, Inc. Department: Operations – Manufacturing Management Reports to: Sr. Process Engineer Location: Totowa, New Jersey Position Summary Englewood Lab is seeking a Process Engineer to support the development, optimization, and implementation of manufacturing processes for cosmetic and personal care products. This position will work closely with R&D, Production, Quality, and other departments to ensure the successful transfer of new products from laboratory development to full-scale manufacturing. Key activities include process development, scale-up, pilot batches, first production runs, validation, and continuous process improvement. Key Responsibilities Support technical transfer and scale-up activities from laboratory development to pilot and full-scale production. CACG
Parsippany, NJ 07054 • (16.4 miles) • Full Time • $25.00 / hr • 11/14/2026
At ACG, we believe meaningful career growth starts with real-world experience. As an intern, you’ll gain hands-on exposure to IBM Business Analytics technologies while learning to design and implement solutions that help organizations make smarter business decisions. You’ll collaborate with seasoned consultants and IT professionals who specialize in building and supporting enterprise-grade systems. Technologies you may work with include IBM Planning Analytics (TM1), MCP Severs, LLMs, Python, Rest APIs, relational data stores. \n\n This internship runs for four weeks, approximately 24 hours per week, with flexible scheduling and remote participation. The program is designed to introduce participants to the IBM Cognos Planning Analytics technology stack and related technologies. Those who coAstrodyne TDI
Parsippany, NJ • (17.2 miles) • Full Time • 11/14/2026
PLANNING SUPERVISOR Hackettstown, New Jersey | 100% Onsite | Power Turn customer demand into coordinated production and inventory plans that improve service, efficiency, and cost performance. WHY WORK FOR ASTRODYNE TDI? Join a global power electronics manufacturer where planning, supply chain, and operations work together to deliver mission-critical solutions to customers around the world. As Planning Supervisor, you will play a key leadership role in aligning customer requirements with production capabilities while driving operational efficiency and continuous improvement. Operational Impact: Lead the planning function that keeps production aligned with customer demand and business objectives. Leadership Opportunity: Mentor and develop a high-performing planning team while influencing croMaxIT Consulting - Max Corporate Group
Boonton, NJ • (18.2 miles) • Full Time • 11/14/2026
Supply Chain / Materials Manager – Manufacturing Operations\n Boonton, New Jersey | On-site | Full-Time | Direct Hire | Senior Level \n MaxIT Consulting – Max Corporate Group is seeking a Production Planning Manager for a manufacturing company in Boonton, New Jersey. \n You will oversee production planning and scheduling, materials planning, inventory control and material availability, aligning customer demand with manufacturing capacity across multiple locations. THE CHALLENGE\n In a fast-paced manufacturing environment, customer requirements, capacity, material availability and inventory levels must be balanced every day. The company needs a planning leader who can build accurate production plans, keep the right materials available at the right time and optimize work-in-process and finisKurt J Lesker Company
Rockleigh, NJ • (19.8 miles) • Full Time • 11/14/2026
KDF Technologies is a leading manufacturer of PVD capital equipment for the microelectronics, medical, thin film circuits, and semiconductor markets. Located in Northern NJ we serve a variety of industries and companies from startups to Fortune 500 organizations. If this sounds exciting, apply to theElectrical Controls Engineer role to be part of something special! Overview of Responsibilities: Elevate your career as an Electrical Controls Engineer. with our dynamic team! In this pivotal mid-level role, you’ll design cutting-edge electronic systems and machinery tailored for high-tech vacuum environments. Harness the power of computer-assisted engineering tools to bring your visionary designs to life. Embrace the challenge of transforming principles of electrical engineering into groundbreTriangle Manufacturing
Saddle Brook, NJ 07458 • (20.3 miles) • Full Time • 11/14/2026
Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a differenLincoln Of Ramsey
Ramsey, NJ • (21.2 miles) • Full Time • 11/14/2026
Senior Master Technicians Wanted\n $10,000 SIGNING BONUS FOR QUALIFIED CANDIDATES! \n WE’LL HANDLE THE PICKUP AND DELIVERY OF YOUR TOOLBOX AND EQUIPMENT! \n Are you an experienced automotive technician looking for a better workplace, a strong team, and an opportunity to grow? Lincoln of Ramsey is growing, and we want you to be part of our team! \n We are actively seeking Senior Master Ford/Lincoln Technicians with experience working on all makes and models. Talented technicians with strong diagnostic and repair skills are encouraged to apply. More Than Just a Job Become Part of the Family\n At Lincoln of Ramsey, we believe a great workplace starts with treating people right. We’re building a team where technicians are respected for their expertise, supported by management, and given the opStrive Pharmaceuticals Inc.
East Brunswick, NJ 08816 • (27.2 miles) • Full Time • $125,000 / yr • 11/14/2026
As the Quality Assurance Manager, your responsibility is to ensure that all processes and products meet the required quality standards and regulatory requirements. Must have in-depth Quality Assurance and Private Label regulatory knowledge. You will play a crucial role in maintaining and improving the quality department within the organization. Your expertise and experience will contribute to the development and implementation of quality assurance strategies and initiatives. In this role you must be meticulous and detail oriented . This position requires a hands-on team player with managerial cGMP / Quality Assurance experience. Must be experienced in interacting with regulatory authorities as this person will be the principle contact for inspections by regulatory agencies, operations, quaMicro Stamping Corporation
Somerset, NJ 08873 • (27.9 miles) • Full Time • 11/14/2026
The Quality Assurance Engineer II is responsible for conducting complex ongoing analysis of the production process inputs and outputs to ensure that customer quality requirements are being achieved. The Quality Engineer II is expected to: Maintain SPC limit at or above the corporate target. Keep customer complaints less than or equal to previous year Manage CAR containment and root cause investigation, corrective action plan and completions on time Maintain scrap below the maximum percent of sales identified Research & Analysis · Collects production data and applies standard scientific and statistical methods to analyze, document, and diagram production processes. Conducts FMEA, DOE, and SPC analysis · Performs complex data analysis and uses six sigma tools to resolve complex quality issueUSPL NUTRITIONALS LLC
North Brunswick, NJ 08902 • (28.8 miles) • Full Time • $65,000 to $75,000 / yr • 11/14/2026
Job Description Date 06/2020 Location 1200 Airport Road, North Brunswick NJ Title Chemist, Quality Control 1, 2 & 3 Department Quality Control Reports to Manager, Analytical, R&D, & Method Validation FLSA (Exempt or Non-Exempt Non- Exempt Role Overview The Chemist, QC role is responsible for performing analytical testing, laboratory investigations, data review, and quality control activities to ensure the identity, strength, purity, and quality of raw materials, active pharmaceutical ingredients (APIs), in-process materials, finished products, and stability samples. The role operates within an FDA-regulated laboratory environment and supports compliance with cGMP, Good Documentation Practices, company procedures, and applicable regulatory requirements. The Chemist performs chemical and phyRobert Half
Greenwich, CT 06830-6086 • (33.3 miles) • Full Time • $120,000 to $150,000 / yr • 11/14/2026
We are looking for a Quality Assurance Lead to help drive reliable, high-performing software delivery for our organization in Greenwich, Connecticut. This position combines hands-on testing with leadership of quality practices, partnering closely with product, engineering, and operations teams to strengthen release confidence. The ideal candidate brings experience across manual and automated testing and is motivated to improve processes, documentation, and team effectiveness.\n \n \nResponsibilities:\n \n• Lead day-to-day quality assurance efforts by organizing test activities and guiding consistent execution across the QA function.\n \n• Create, refine, and carry out test plans, test cases, and scripted test scenarios for new features, enhancements, and fixes.\n \n• Expand both manual andTec5USA
Plainview, NY 11803 • (33.9 miles) • Full Time • $80,000 to $110,000 / yr • 11/14/2026
Company Description tec5USA Inc. is a manufacturer of spectroscopy systems utilizing UV-Vis, NIR, and Raman technologies. Our solutions enable real-time measurement and analysis of chemical and physical parameters across industries including pharmaceutical and biotechnology, chemical and petrochemical, semiconductor manufacturing, environmental technology, food and beverage, and agriculture. tec5USA is certified to ISO 9001:2015, ISO 13485, ISO 14001, and ISO 27001 standards. Position Summary tec5USA is seeking an Opto-Electrical Mechanical Engineer to support the R&D department for development of the analytical instrument for the manufacturing industry. The R&D Engineer will work hands-on with UV-Vis, NIR, and Raman spectroscopy systems , optical and electronic components, sensors, sampliAerosphere Power And Navigation
Budd Lake, NJ 07828 • (34.3 miles) • Full Time • $95,000 to $120,000 / yr • 11/14/2026
At Aerosphere Power and Navigation, we're committed to attracting and nurturing diverse, high-performing talent who are passionate about their work. Our employees share a common purpose-supporting our customers' missions while pursuing their own professional growth. We foster an inclusive and engaging workplace culture where innovation, collaboration, and work-life balance thrive. Core to our values is a steadfast commitment to excellence, community engagement, and integrity in everything we do . About Aerosphere Power and Navigation Aerosphere Power and Navigation Corporation is a leading independent provider of advanced inertial navigation and power solutions for the aerospace, defense, commercial, and industrial sectors. As pioneers in fiber optic gyros, and ring laser gyros, we drive iTDK-Lambda Americas Inc
Neptune City, NJ 07753 • (37.5 miles) • Full Time • 11/14/2026
GENERAL PURPOSE OF THE JOB : Set up and Operate, maintain various level 1 CNC Sheet Metal machines. ESSENTIAL DUTIES, RESPONSIBILITIES & AUTHORITIES include the following. Other duties may be assigned. Set up and operate level 1 (Sheet Metal Machines). List of Level 1 (Sheet Metal Machines). Amada Punch Press (CNC) Bridge Port Machine. Cut off Saw. Drill / Tap Machines. Forklift. Hardinge Machine (CNC) Hardware Machines. Jaws Machine. Lathe Machine. Roller Machines. Sanding Machines. Shear Machine. Spotweld Machine. SuperMax Machine (CNC) Table Saw Machine Horizontal / Vertical Saw Machines. Help out with CNC Machine Operator Level 2. Use of Measuring tools. Perform daily maintenance on above equipment. Inspect parts. · Must have good housekeeping practices and the ability to adhere to allT&M Associates
Bloomfield, NJ 07003 • (5.3 miles) • Full Time • 11/14/2026
T&M Associates is seeking an experienced Supervising Electrical Engineer to join our MEP team. This leadership role is ideal for a seasoned professional with a strong background in electrical systems design for buildings and facilities who is looking to combine technical expertise and project leadership. The successful candidate will lead the design and delivery of complex electrical projects, oversee technical staff, support business development initiatives, and collaborate closely with multidisciplinary MEP teams to provide innovative and high-quality engineering solutions for public and private sector clients. Qualifications Bachelor's degree in Electrical Engineering or a related engineering discipline. Professional Engineer (PE) license preferred. 10+ years of progressive experience iNEW YORK EDGE, INC
New York, NY 10451 • (11.3 miles) • Part Time • $28.00 to $35.00 / hr • 11/14/2026
About Us: New York Edge is the largest provider of after-school and summer camp programs inNew York City public schools. Each year, academic programs--including STEM, thearts, sports & and wellness, and college access help 40,000 students develop leadershipskills and succeed in school. Working parents count on our programs to provide safeand enriching environments for their children. Summary: New York Edge Curriculum & Instructional Technology Department is seeking passionate and enthusiastic individuals to fill the part-time role of Audio Engineering Specialist to bolster our new music initiative, The New York Edge Music Production Academy. This program is designed for middle and high school students participating in our afterschool program. As an Audio Engineering Specialist, you will haWireless Telecom Group
Parsippany, NJ 07054 • (16.4 miles) • Full Time • $25.00 / hr • 11/14/2026
MAURY MICROWAVE JOB DESCRIPTION Date: 9/16/2026 Job Title: Electrical Engineering Intern FLSA Status: Non-Exempt Department: Engineering Reports to (Title): Engineering Manager Position Type: Temporary, Full-Time limited-term internship, approximately 3 months (semester TBD) Brief Summary of Position: Support the engineering teams responsible for the development and sustainment of Maury's RF/microwave instrumentation for power measurement, signal sources, and analyzers. Work alongside senior RF engineers to gain hands-on engineering experience across the product development lifecycle, from concept and design through testing, documentation, and sustaining engineering. Essential Functions of the Position: • Assist the development team with RF/microwave circuit design, prototyping, and testinALL GENERAL COMMUNITY SERVICES LLC
Clifton, NJ • (7.9 miles) • Full Time • 11/14/2026
POSITION FUNCTIONS: -Operate and monitor Durst P5 350 digital printing equipment. -Set up and adjust the machine according to production specifications -Load and change printing material/media -Monitor Print quality and make necessary adjustments -Perform basic troubleshooting and routine machine maintenance -Follow production schedules and quality-control procedures -Maintain a clean and sage work area -Report production information and report equipment issues. REQUIRED/PREFERRED -Previous experience operating digital printing presses or large-format printing equipment. -Experience with Durst P5 series equipment preferred -Manufacturing or printing production experience -Mechanical aptitude and ability to troubleshoot basic equipment issues -Good attention to detail -Abillity to work in aLenmar Consulting Inc.
Ridgefield Park, NJ • (8.8 miles) • Full Time • 11/14/2026
Company Description Manufacturing Job Description Experience: Hands on experience in Finance & Accounts, Audit, Statutory Compliances, Budgeting, variance analysis, profitability analysis and MIS, Govt Liasoning. Acts as a Client of the segment Delegation of Authorities (DOA) and Right Clients Right Terms (RCRT), assisting in financial matters wrt investment decisions: building business cases for OPEX and CAPEX commercial investments. Administrating tax programs. Should be a subject matter expert regarding GAAP and IFRS standards. Qualifications Bachelor's degree in accounting, Finance, or related field preferred 8 to 10 yrs of experience of accounts function. Should have worked on SAP/ Oracle. Preferred experience in manufacturing industry IFRS standard Understanding of the Local Market (LoveShackFancy
New York, NY 10003-1005 • (11 miles) • Full Time • $80,000 to $120,000 / yr • 11/14/2026
ABOUT LOVESHACKFANCY \n LoveShackFancy, founded in 2013 by Rebecca Hessel Cohen, is a global fashion, beauty, childrenswear, accessories, home, and lifestyle brand celebrated for its romantic, vintage-inspired aesthetic and cult-like community. Known for its immersive, whimsical interiors, the brand has grown to 25 boutiques across the U.S. and London. Signature ruffles, pink, and bows anchor the collections, while storytelling and pioneering community-driven experiences have shaped LoveShackFancy into more than a fashion labelit’s a shared lifestyle movement. Coveted collaborations include Victoria’s Secret PINK, Gap, Target, Stanley, Pottery Barn, Bogner, and more. In 2023, LoveShackFancy launched Beauty exclusively at Sephora, inviting millions into its rose-colored world of whimsy andDavid Joseph & Company
New York, NY • (11 miles) • Full Time • $170,000 to $250,000 / yr • 11/14/2026
New York, NY · On-site (4 days/week) · Full-time Compensation: $170K–$250K + equity About the Company\n Our client is a Series C healthtech company automating the health insurance claims process for medical providers, replacing manual back-office work with software that helps clean claims get paid. Founded in 2019, they have grown quickly, more than doubling revenue and headcount each year, and are expanding from digital health into the broader enterprise provider market. \n Founded 2019 · ~175 people · Industry: Healthcare, Insurtech, B2B, AI The Role\n This is a customer-facing engineering role that sits between the product and the people using it. You will move between writing code in the core product and working directly with customers to turn real-world pain points into shipped featurStratas Foods
Englewood, NJ 07631 • (12.3 miles) • Full Time • 11/14/2026
Company Description Stratas Foods LLC is the leading supplier of fats and oils to the Foodservice, Food Ingredients and Retail Private Label markets in North America and is a producer of quality bulk and packaged dressings, mayonnaise and sauces. Stratas Foods was formed in October 2008 as a 50/50 joint venture between ACH Food Companies (ACH) and Archer Daniels Midland (ADM). Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy,IL; Englewood and Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN.We arecommitted to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to makeStratas Foodsa great place to work and are building a team capable of meetiCelularity
Florham Park, NJ 07932 • (14.3 miles) • Full Time • $190,000 to $230,000 / yr • 11/14/2026
Description: About Celularity Celularity Inc. (Nasdaq: CELU) is a longevity-focused regenerative and cellular medicine company developing and manufacturing allogeneic and autologous cell therapies derived from the postpartum placenta. Celularity leverages the placenta’s unique biology, immunologic properties and scalable availability to develop therapeutic solutions targeting fundamental mechanisms of aging and age-related disease. Quality Assurance Lead and maintain a phase-appropriate Quality Management System (QMS) overseeing core quality processes including but not limited to deviations, CAPAs, change controls, document management, training, complaints and risk management. Provide GMP and GTP quality oversight of internal operations ensuring compliance with FDA, EMA, all applicable GxPRandstad
Whippany, NJ 07981 • (16.4 miles) • Full Time • $40.00 to $40.26 / hr • 11/14/2026
Job Title: Print Production Specialist / Graphic Artist (12-Month Contract) Location: Whippany, NJ (Hybrid) Employment Type: Contract (12 Months) About the Role We are looking for a detail-obsessed Print Production Specialist / Graphic Artist to join our team on a 12-month hybrid contract in Whippany, NJ. In this role, you will be the technical backbone behind our global consumer health packagingcovering OTC medicines, supplements, and personal care products. If you thrive in fast-paced, highly regulated environments where precision, compliance, and technical mastery take center stage over open-ended creative ideation, this is the role for you. You will partner closely with Graphics Management, Regulatory, and Marketing to ensure every carton, label, and leaflet hits the press accurately,Zina's Fine Foods
South Plainfield, NJ 07080 • (19.8 miles) • Full Time • $140,000 to $170,000 / yr • 11/14/2026
Engineering and Maintenance Manager Zina's Fine Foods, South Plainfield, New Jersey. On-site, full time. $140,000 to $170,000 per year. Zina's Fine Foods is a refrigerated food manufacturer in South Plainfield, New Jersey. We make ready-to-eat salads, side dishes and prepared meals for national and regional retailers, and we are growing faster than our plant was built for. We are hiring a Maintenance & Engineering Manager. You will report directly to the President and own the engineering function outright. There is no engineering layer above you and no corporate group to defer to. You decide what gets fixed, what gets bought, what gets automated and in what order. Your team You will lead a small in-house team covering controls, mechanical repair and facilities. You decide what each of themEurofins USA BioPharma Services
Edison, NJ • (19.9 miles) • Full Time • 11/14/2026
Company Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensicRJT Electrical Contractors INC.
New Brunswick, NJ 08846 • (23.5 miles) • Full Time • $35.00 to $40.00 / hr • 11/14/2026
Industrial position open. Aggressive Electrical Contractor hiring for a full Time position at one location. OT a MUST and a lot of it. Guaranteed 48 hours a week. Good pay + Benefits & 401K.ACS System Associates
Hicksville, NY • (31.2 miles) • Full Time • $100,000 to $150,000 / yr • 11/14/2026
Key Duties & Responsibilities: Creating 2D and 3D models of buildings, structures, and related components using Revit software based on architectural, structural, or MEP (mechanical, electrical, plumbing) design information. Developing detailed construction documentation, based on the Revit models Collaborate with engineers and project managers to ensure accurate and efficient designs BIM Coordination to ensure accurate integration of design information into the Revit model Following established BIM standards, guidelines, and templates to ensure consistency and quality in the Revit models and documentation. Model Maintenance and Updates: Regularly updating the Revit models to reflect design changes, revisions, or as-built conditions. Managing the organization and cleanliness of the model C