Spring Valley, NY 10977 • (16 miles) • Full Time • 10/8/2026

Job Summary -The Manufacturing Operator III – Granulation performs functions relating to the processing of drug products, ensuring product compliance to established current Good Manufacturing Practices (cGMPs), customer requirements and in conjunction with all Standard Operating Procedures (SOPs). Follows standard procedures to complete tasks, some of which may vary in scope, sequence, complexity and timing. Applies skills and knowledge to recognize issues and to increase efficiency, throughput and quality. Proactively identifies and resolves complex problems where considerable judgment is required in choosing among multiple options. Understands and runs processes to meet the assigned standards/routers and fulfills the assigned schedule; when these are not achieved, participates in the deb

Mahwah, NJ 07430 • (16.4 miles) • Full Time • 10/8/2026

Job Summary:The production worker will be able to work on the production line with consistent speed and accuracy while maintaining production standards and work towards improving productivity without compromising quality.Essential Duties and Responsibilities:Perform production duties such as assisting in the cutting, slicing, dicing and packaging of fresh produce for client ordersVerify the product is sealed, has correct smart date label and packaged correctly.Move product and inventory using a hand jack.Report defective materials or questionable conditions to the department supervisorMaintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulationsPerform related duties as required by supervisionMay be moved to other lines as workload requiresC

Teaneck, NJ 07666 • (31.2 miles) • Full Time • 10/8/2026

Benefits:401(k)Paid time off We are hiring for an ELECTRO-MECHANICAL EXPERT. This is direct hire with benefits. Salary: $30-$35/hr. depending on experience. JOB MISSION: To oversee and manage all assembly functions, including mechanical and electro-mechanical. Coordinating with the appropriate Project Managers to ensure all parts needed for assembly are received on time and with the Quality Control Department to ensure parts used in assemblies, and the assemblies themselves, are conforming to the requirements. WORK PERFORMED / RESPONSIBILITIES:Build and monitor daily\weekly\monthly schedules for each process, team, and\or assembler as appropriate.Issue work orders for assemblies.Report production and\or ensure Assemblers and reporting production within the ERP system.Ensure proper equipmen

Mamaroneck, NY 10543 • (34.9 miles) • Full Time • 10/8/2026

Benefits:Locally Owned BusinessTeam oriented environmentOpportunity for GrowthFlexibilityCompetitive CompensationBonus based on performanceCompany partiesCompetitive salaryFree uniformsHealth insuranceOpportunity for advancementPaid time offTraining & development401(k)401(k) matchingDental insuranceFree food & snacksRelocation bonusSigning bonus Let’s keep this simple. We are looking for a real A-tech. Not a parts changer. Not a guesser. If you can properly diagnose, think through problems, and fix cars right the first timeyou’ll do very well here. If you rely on YouTube and guessing, this is not the place for you. Schedule: Monday to Friday 8am–5pm (Be here BEFORE 8 we start every day with a quick team huddle) Pay: $40–$50/hour + bonus (Bonus kicks in after 40 hours produced for the week)

Ridgefield, NJ 07657 • (35 miles) • Full Time • 10/8/2026

About Us: J And N Flooring, LLC is a trusted provider of high-quality epoxy flooring solutions. We are seeking an experienced Epoxy Foreman to lead our installation crews and ensure top-tier project execution. Responsibilities: •Supervise and coordinate epoxy flooring projects from start to finish. •Lead a team of installers, ensuring quality workmanship and efficiency. •Oversee surface preparation, epoxy mixing, and application processes. •Ensure job sites meet safety and industry standards. •Communicate effectively with project managers, clients, and crew members. •Troubleshoot and resolve issues on-site to maintain project timelines. Requirements: •Minimum 3 years of experience in epoxy flooring installation. •Proven leadership or foreman experience in the flooring industry. •Strong kno

Fairview, NJ 07022 • (36.1 miles) • Full Time • 10/8/2026

SUMMARYEnsures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction.ESSENTIAL DUTIESinclude the following. Other duties may be assigned.Recruits, and motivates qualified service technicians.Assists technicians in developing their skills.Understands, keeps abreast of, and complies with federal, state, and local regulations that affect service operations, such as hazardous waste disposal, OSHA Right-to-Know, etc.Understands and ensures compliance with manufacturer warranty and policy procedures.Ensures that all department employees receive appropriate manufacturer training.Conducts regular performance reviews for all technicians in accordance with dealership guidelines.Test d

Stamford, CT • (36.5 miles) • Full Time • 10/8/2026

About the Company/PositionAll Star Paving & Sealing LLC, Connecticut's premier asphalt paving and maintenance contractor, is excited to announce a career opportunity for an Assistant Production Manager serving Fairfield & Westchester County. Become an integral part of a dynamic and reputable family-owned business with over 25 years of excellence in the industry. As a leading full-service asphalt and concrete contractor, we take pride in providing top-notch services and building strong relationships within our communities. Our team handles everything from residential driveways and parking lots to major roadway projects, along with concrete work, milling, grading, excavation, masonry and asphalt maintenance.Pay:$50,000 - $100,000/yr Based on experienceBenefits/Perks:Retirement and Company Ma

Secaucus, NJ 07094 • (37.8 miles) • Full Time • 10/8/2026

POSITION SUMMARY:Remington and Vernick is seeking a licensed Professional Engineer (PE) with a minimum of 8 years of experience in HVAC/mechanical, plumbing, and fire protection systems design, including fire alarm systems, to join our growing MEP team as a Project Manager/Engineer. This role involves overseeing projects from concept through construction, mentoring junior staff, and playing a key role in delivering high-quality engineering services for educational, commercial, and industrial facilities.This position will be involved in the planning, design, and documentation of mechanical systems for a variety of project types, including educational, commercial, institutional, and industrial facilities. The ideal candidate has a well-rounded mechanical background, strong technical fundamen

East Orange, NJ 07017 • (37.8 miles) • Full Time • 10/8/2026

We are a fast-paced 24/7 production facility located in East Orange, NJ. Our team is dedicated to maintaining high-quality standards while meeting production goals. We operate 365 days a year with no scheduled holidays off, ensuring consistent service to our customers.Position Summary:We are seeking reliable and motivated Production Workers to join our team. This role requires individuals who are comfortable working in both hot and cold environments, with the flexibility to work any shift, including nights, weekends, and holidays.Responsibilities:Operate production machinery and equipment safely and efficiently.Handle, inspect, and package materials according to company standards.Maintain a clean and organized work area.Follow safety protocols and adhere to company policies.Work collaborat

Bloomingdale, NJ 07403 • (21.8 miles) • Full Time • 10/8/2026

CNC Machinist - Growing manufacturer looking for well qualified and talented Machinists. Program, set-up & operate Vertical/Horizontal Milling Centers and/or Turning Centers. This is a growing business looking for long term responsible candidates to take on continued responsibilities.-2-5 years CNC experience. Doosan & Fadal-Well versed in G-Code programming.-Proper use of measuring tools, calipers & micrometers, etc.-Fully capable of understanding blueprints and GD&T.-Closely work with QC and Engineering.-Familiarity with welding a plus.

Poughkeepsie, NY • (29.7 miles) • Full Time • 10/8/2026

Experienced DraftspersonWestchester Modular HomesWingdale, NYDesign/EngineeringFull-TimeCompensation: $20 to $40 an hourJob Description:Company OverviewWestchester Modular Homes, the national leader in custom home building, has an outstanding opportunity for a talented experienced drafter.For the past 40 years our team of skilled tradesmen have utilized industry-leading innovations in design, superior craftsmanship, and customization to construct modular homes in our climate-controlled state of the art factory located in Wingdale, NY near the Connecticut border. Building efficiently in a weather protected environment, with on-time delivery, and cost control, is the essence of modular construction and has made systems-built housing one of the fastest growing segments in the housing industry

Fairfield, NJ 07004 • (30.7 miles) • Full Time • 10/8/2026

Role and ResponsibilitiesPerforms final assembly, finishing and/or testing of customer product in the Assembly & Test Department at Daniel Road location as assigned.As an Assembly & Test Technician, you will be responsible for building assemblies and other various components that conform to specifications and drawings to meet the Company’s quality standards.Key duties/responsibilities of Assembly & Test Technician, including, but not limited to:Working with Helicoil’s installing and removing as necessary.Assemble and fit together mechanical components building chambers and other final assemblies for testing.Troubleshoot and help resolve assembly issues that occur.Perform final cleaning operations on finished product by customer standards and procedures.Inspects work in progress to verify c

Parsippany, NJ 07054 • (33.8 miles) • Full Time • 10/8/2026

Production Line workerFull-timeParsippany, NJDescriptionAt ECOS®, we are a women-led company with a mission to create plant-powered laundry detergents and cleaners that are safer for people, pets and the planet. As a Climate Positive company, we restore more than 100% of its carbon, water, and energy use back to the earth, in our four manufacturing facilities right here in the USA.We have an immediate opening for a 2nd Shift Production Line Worker to label, fill and package products according to production schedules while ensuring safety, quality, and efficiency.Key Job Functions:· Making sure product has the proper container, cap, and carton· Ensuring bottles, caps, cartons, and filling equipment is neat and clean· Ensuring product is labeled, filled, and boxed properly as it passes the p

Dover, NJ • (35.4 miles) • Full Time • 10/8/2026

Location: Dover, NJ (100% On-site daily)Compensation: $51,000 - $60,000/year (depending on experience)Employment: Full-time, Permanent (Direct Hire)An established textile and flag/banner manufacturing facility is looking for a hands-on Production Manager to oversee daily assembly, sewing, and embroidery operations at our Dover, NJ facility. In this role, you will lead and mentor a team of 20+ production staff while serving as the operational and quality expert for our customized flag and banner finishing processes.What You'll Own- Oversee daily assembly, sewing, and machine embroidery operations on the production floor.- Direct, supervise, and mentor a production crew of 20+ direct reports.- Act as the subject-matter expert on banner/flag assembly, finishing, and quality standards.- Manage

Hoboken, NJ • (40.6 miles) • Full Time • 10/8/2026

Job Title: Senior Manufacturing EngineeLocation: Hoboken, NJDivision: ManufacturingDepartment:Manager of Product Design and ManufacturingAbout Us:Quantum Computing Inc. (QCi) (Nasdaq: QUBT) is an innovative, integrated photonics company that provides accessible and affordable quantum machines to the world today. QCi products are designed to operate at room temperature and low power at an affordable cost. The Company’s portfolio of core technology and products offer unique capabilities in the areas of high-performance computing, artificial intelligence, cyber security as well as remote sensing applications.Scope of the Job:QCi is seeking a dedicated and passionate Senior Manufacturing Engineer to build our production team in Hoboken, NJ. In this vital role, you will define process methodolo

Summit, NJ • (42.6 miles) • Full Time • 10/8/2026

Senior Master TechnicianWe are seeking a Senior Master Volkswagen/ Audi Technician to join our team! This individual will be responsible for performing a variety of mechanical services on vehicles, diagnosing and repairing complex mechanical issues, and providing exceptional customer service to our clients. The ideal candidate will have a strong background in the automotive industry and a passion for delivering top-quality workmanship. $5000 Signing Bonus.About UsDouglas Motors Has been serving the community for more then 65 Years in Summit. We are a family owned and operated Auto Group that takes pride in taking care of it's employeesCompensation and BenefitsPaid TrainingProfessional DevelopmentHealth, Dental, & Vision Insurance401(K)Signing BonusResponsibilitiesPerform a wide range of me

Newark, NJ 07114 • (42.8 miles) • Full Time • 10/8/2026

Salary:$27.00 - $27.50 Per HourOther Forms of Compensation: N/AWhat makes FLIK clickWhat makes FLIK click? Our people. The decisions, actions and attitudes of our associates earn the trust and loyalty of our clients every day. We know how to pick them and we know how to grow them. It starts with hiring people who share our passion for food and hospitality. Once we find the right talent, we encourage, value and recognize their contributions.We keep our people renewed, excited and engaged by providing hands-on training and educating them about the latest trends. We give them a stake in successfully raising the bar. Our people love what they do and they love sharing their passion. Join our team and see the FLIK difference. Where a job isn’t merely a job but the start of a career where you can

Fairfield, NJ 07004 • (30.7 miles) • Full Time • 10/8/2026

Description: Job Summary:We are seeking a full-time Cable Assembler responsible for building precision cable assemblies for critical industry applications containing stranded wire rope, conduit, sub-assemblies, fasteners, and other component parts according to customer specifications. This role involves operating a variety of machines, measuring devices, and load testing equipment, through a multi-stage production process. The Cable Assembler has a critical role and must be dedicated to the utmost in quality, accuracy, and consistency.Essential Job Functions:Equipment Operation:Utilize measuring equipment such as micrometers, calipers, and tape measures to ensure dimensional conformance and proper production and tooling setups.Operate rotary swagers, pneumatic and hydraulic crimpers and pr

New Windsor, NY 12553 • (11.8 miles) • Full Time • 10/8/2026

Description: Position DetailsLocation: Healthy Kids Programs, 2 Summit Court, Fishkill, NY 12524 - In PersonSchedule: Part-time, Monday–FridayPay: $20/hour, depending on experienceSchedule: 9:30 AM – 2:30 PM (flexible – 20 hour maximum with possible increase)Part-Time Benefits Include:Employer-paid childcare for children enrolled in our program on the days and during the hours you workTelehealth, vision, and dental coverage401(k) for eligible employeesPaid sick timeOn-demand payProfessional development and career advancement opportunitiesAs a Subsidy Specialist, you will:Oversee the childcare subsidy program for Healthy Kids sites, including:Registering new sites to accept subsidies.Renewing and maintaining existing registrations.Completing requests from state subsidy agencies.Billing agen

Peekskill, NY 10566 • (14.7 miles) • Full Time • 10/8/2026

Tecknowledgey Inc. has a full-time opening for an Electronics Assembly Technician.Key Responsibilities· Hand-soldering components to thru-hole circuit boards.· Epoxy encapsulation and cable assembly.· Following written laboratory procedures.· Multitasking and collaborating with a small team.Position Requirements· Experience: 2+ years in electronic assembly. Basic hand soldering is a necessary skill· Certifications: J-STD-001 and IPC-A-610 preferred or willingness to get certified.Experience with lab test equipment is a plus· Hours: Monday – Thursday, 8:00 AM – 4:00 PM Fridays 8AM - 2PM· Location: On-site at 8 John Walsh Blvd, Peekskill, NY 10566Compensation & Benefits· Pay: $40,000+ per year (Salary Based on experience)· Health: Comprehensive healthcare package· Wealth: 401(k) retirement p

Franklin Lakes, NJ 07417 • (21.5 miles) • Full Time • 10/8/2026

Job Title: Tech1, Product Development EngineeringLocation: Franklin Lakes, NJ, US, 07417Contract Type: 12 months on W2Shift: 1st shiftPayrate: $23 -$26/hrJob Summary:The Laboratory Technician I Contractor in the Materials & Characterization R&D group will be responsible for conducting testing /experiments; writing technical reports; supporting test request workflow and operation of equipment in the materials characterization labs. They will ensure compliance with Client quality policies, procedures and practices through appropriate communication, training and education of sound quality assurance principles; ensure compliance with all local, state, federal and Client safety regulations, policies and procedures.Project Responsibilities:Reporting to the Lab Manager, the incumbent performs ben

Paterson, NJ 07501 • (28.1 miles) • Full Time • 10/8/2026

CNC Turning Machinist – Prototype & Production Where: Paterson, NJWhen: Monday–Friday, 8:00 AM–3:30 PMCompensation: $28.00/hour, based on experience and skills Make precision your craft Own the turning process from setup to final inspection. You’ll bring HAAS CNC lathes up to speed, switch over to HAAS mills when needed, and keep work flowing with clean setups and accurate offsets. You’ll validate your first piece, monitor quality, and adjust as you goespecially when working aluminum and stainless steel. As you grow, you’ll add new capabilities by learning additional machines, including Kiwa. Your impact Translate blueprints and technical drawings into accurate parts.Complete multiple machine setups; set tool lengths and manage offsets.Perform first-article inspections and verify specs bef

Paterson, NJ 07512 • (28.7 miles) • Full Time • 10/8/2026

Quality Assurance - Stability Associate Quality Assurance Associate – StabilityLocation: Totowa, NJ (Onsite)Employment Type: Full-Time | Non-Exempt (Hourly)Department: Quality AssuranceReports To: QA-OTC Drug Stability CoordinatorOrganizational Relationships: Works closely with the QA-OTC Drug Stability Coordinator and the Drug Stability Technician. Works with QA Systems & Compliance, QA Documentation, Validation, QC, Manufacturing, R&D, Process Engineering, Warehouse, Regulatory Affairs, Purchasing, external contract testing laboratories, and customer quality contacts as needed to support the stability program.Position SummaryThe QA Associate – Stability gives day-to-day quality assurance support to the QA-OTC Drug Stability Coordinator in running the site's OTC drug stability program, wo

Clifton, NJ • (31.6 miles) • Full Time • 10/8/2026

Northern NJ fabrication shop is looking for Metal Finisher specializing in surface preparation located in Clifton, NJRelated experience preferred but not required!!!!The metal finisher/polisher will perform all grinding and polishing on Stainless steel and bring the product back to a #4 finish. This professional needs to be knowledgeable of metal removal and polishing methods and techniques, Standard Procedures. We are looking for someone reliable and willing to learn a new profession.ESSENTIAL DUTIESReceives and performs expertly all order requirements and metal finishing/polishing instructions.Undergoes specific training and instruction to achieve acceptable levels of skills, quality, and productivity.Performs routine equipment cleaning and maintenance programs.Communicates effectively w

Englewood, NJ 07631 • (31.8 miles) • Full Time • 10/8/2026

Company Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, developed over more than 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value-added, branded, and custom-formulated fats and oils solutions to the food service, food ingredient, and retail sectors. At Stratas Foods, we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise, and salad dressings to the private label retail bottled oils market in the United States.Manufacturing facilities are located in Dallas and Houston, TX; Dec

Clifton, NJ 07014 • (33.8 miles) • Full Time • 10/8/2026

Description: PURPOSE:The Maintenance Engineer is responsible for assisting with the operation maintenance service and repair of equipment as assigned. He/she is also responsible for participating in the preventative maintenance program handling guest requests and other work orders as assigned. He/she is also responsible for performing the job in a safe and efficient manner and performing trade jobs such as carpentry, painting, plumbing etc. May require driving a shuttle van when needed (property specific).RESPONSIBILITIES:Assist with the operation, maintenance and repair of equipment.Change out light bulbs; perform preventative maintenance for guest rooms to include vinyl repair touch up paint minor furniture repair tub caulking tile repairs etc.Perform preventative maintenance for ice mac

Montclair, NJ 07042 • (34.9 miles) • Full Time • 10/8/2026

Title: Quality Control Production Assistant Reports to: Manager of Production Salary: $50,000 Employment Status: Full-time, Exempt Quality Control Production Assistant in Vocational Rehabilitation The Quality Control Production Assistant supports vocational rehabilitation programs by ensuring that training and production meet established quality, safety, and compliance standards. This role bridges production operations with rehabilitation goals, ensuring that individuals in training can meet job requirements and workplace expectations. The RoleQuality Control Support:Assist in developing and implementing quality control procedures and standards for vocational training and production environments.Inspection & Testing:Perform routine inspections, tests, and quality checks on training materia

Newark, NJ 07102 2660 • (41.1 miles) • Full Time • 10/8/2026

This is a hands-on manufacturing floor role responsible for improving process performance, product quality, efficiency, and cost. You’ll work directly with Operations and Maintenance to troubleshoot problems, identify root causes, and implement sustainable improvements. DUTIES / RESPONSIBILITIES Analyze process data and identify opportunities for improvementTroubleshoot manufacturing issues and drive problems through resolutionLead root cause analysis, Lean, 5-Why, RCCA, Six Sigma and DOE initiativesImprove process efficiency, quality, throughput, and costDevelop and improve SOPs, controls, and standard workPartner with Electrical/Controls Engineering on process control improvementsInvestigate quality issues, customer complaints, and process deviationsSupport capital projects and process

Newark, NJ • (41.1 miles) • Full Time • 10/8/2026

Position SummaryBennett Heat Treating & Brazing Co., Inc. is seeking an experienced and self-directed Maintenance Manager to oversee all production-equipment and facility-maintenance activities.Although the title is Maintenance Manager, this is an individual-contributor position with no direct reports. The successful candidate will personally troubleshoot, repair, inspect, and maintain electrical and mechanical systems throughout the facility. A strong Maintenance Technician or Maintenance Supervisor who is ready to assume full ownership of the maintenance function may be considered.This position works frequently with 480V electrical systems, DC voltage, water pumps, vacuum pumps, furnace elements, fans, hydraulics, and other industrial equipment. The Maintenance Manager will also maintain

Irvington, NJ 07111 • (41.1 miles) • Full Time • 10/8/2026

General Description: Oversee daily operations of plant from production, planning and manufacturing to ensure policies and procedures are followed. Develop processes that maximize stewardship, safety, quality, and productivity.Reports to:Vice President OperationsResponsibilities:Plan, organize, direct, and run day-to-day operations to exceed (internal / external) customers’ expectations.Increase production, capacity and flexibility while maintaining current quality standardsBe responsible for production output, product quality and on-time shippingAllocate resources effectively and fully utilize assets to produce optimal resultsMonitor operations and trigger corrective actionsShare a trusting relationship with workgroup & recruit, manage and develop plant staffCollect and analyze data to fin

Jersey City, NJ • (42.2 miles) • Full Time • 10/8/2026

Sheetmetal Fabricators needed for multiple commercial construction projects near Riverdale, New Jersey area. This is primarily shop work, but occasionally there may be a need for you to assist with installation in the field. You will be fabricating various ductwork using a typical plasma machine and will need to be able to operate machine and its computer system. You must bring your own hand tools of the trade and you may be required to pass a pre employment drug and background screening upon arrival.Pay: up to $37/hourPer Diem: None Duration: 5.5 weeksHours: 40/weekPlease call Grus Construction Personnel for an immediate interview or reply with resume!Phone: 888..230..9908Fax: 888..230..9909Email: registration@@gruspersonnel.com (remove the additional @ symbol)\nCompany DescriptionWe beli

Jersey City, NJ • (42.2 miles) • Full Time • 10/8/2026

Railcar Repairman (Carman)Repairs, modifies, and upgrades rail cars.Rebuilds car components: bolsters, side framers, hitch heads, and box car doors.Welds (up to 30% of time), fabricates, and uses a cutting torch.Performs mechanical labor (frequently - 95% of time).Repairs and maintains railcars, according to blueprints and other specifications, using hand tools, power tools, and precision measuring instruments. Inspects machines and equipment visually by touch, special knowledge, and training, to locate causes of trouble.Operates forklift to move, align, and set in place parts in place.Measures, cuts, and threads pipes and replaces air lines using hand tools.Assembles subassemblies, major components, and equipment. Checks the function to test for proper operation.Repairs broken parts using

Allendale, NJ • (20 miles) • Full Time • 10/7/2026

Job Requirements Stark Tech is seeking a Senior Project Engineer - Mechanical who excels by transforming mechanical system requirements into high-performance, energy-efficient, and fully integrated building solutions. You lead projects from conceptual design through construction support and commissioning, applying deep technical expertise in HVAC, hydronics, central plant systems, and air distribution to ensure every design is safe, code-compliant, and optimized for long-term reliability. You thrive at bridging early pre-construction solutioning with detailed engineering and field execution-collaborating across mechanical, electrical, structural, controls, and architectural teams to deliver systems that perform as designed in the real world. Through technical leadership, clear communicatio

Yonkers, NY 10701 • (30.6 miles) • Full Time • 10/7/2026

BASIC FUNCTIONSLead and direct the Quality Engineering Team, ensuring that products meet design and reliability requirements. This individual has the responsibility and authority to carry out assigned tasks.SPECIFIC DUTIESOffer technical support as required throughout the organization.Oversight of the Designated Quality Representative (DQR) program for Sikorsky, Lockheed, GDLS and UTC.Ensure AS9102 and customer requirements are met for all First Article Inspections conducted at CTGTechnical blueprint, specification and datasheet interpretation and support for all departmentsProvide support for customer defined contract review on any technical requirements established by the customer.Product planning for all new product(s) – Sampling plans, Inspection/Test methods, validation/verification p

Fairfield, NJ 07004 • (30.7 miles) • Full Time • 10/7/2026

Machine Operator - URGENT HIRING** Please note interviews will be held in person in Fairfield, NJ**Full-TimeMonday - Friday1st Shift: 6:00 AM - 3:00 PMStarting at: $20.50-21.50hr Depending on experienceProper PPE and Uniforms providedHealth, Dental, VisionLooking for Machine Operators interested in a long-term opportunity, willing to learn and progress within the Natural Stone Fabrication field.Job Expectations:Fabricate edges, sides, corner radius, angles, and sink cutouts using the tools required in the processVerify quality of finished workpieces by inspecting, comparing to templates, and measuring their dimensionsAssist in minor repair and maintenance on assigned equipmentWearing all Personal Protective Equipment (safety glasses, earplugs, waterproof face mask, etc.)Assuring that all w

Hackensack, NJ • (30.8 miles) • Full Time • 10/7/2026

Senior Supply Planner – Face & Skin PortfolioHybrid - 2/3 days a week HackensackA growing consumer products company is seeking a high-potential Senior Supply Planner to own a key Face & Skin portfolio supporting several well-known personal care brands.This is not a transactional planning role.We are specifically looking for an agile, proactive, commercially aware supply chain leader who thrives in fast-moving environments, enjoys solving complex supply challenges, and wants the opportunity to help transform and elevate a growing global supply network.The ideal candidate comes from a best-in-class CPG environment (beauty, personal care, wellness, consumer products, etc.) and brings strong exposure to outsourced manufacturing, global supply planning, innovation launches, and cross-functional

Andover, NJ 07821 • (37.7 miles) • Full Time • 10/7/2026

Crossed Keys Estate is seeking enthusiastic and creative team players looking to learn about floral and decor design and the luxury weddings industry. Event setup team members will play a crucial role in supporting the aesthetic design and execution of events. This position requires attention to detail, capacity to work in a fast-paced environment and passion for making beautiful and memorable experiences. Candidates should be capable of wearing many hats as the floral and decor team is a small, highly collaborative team. Responsibilities to include: Assisting head designers with processing and storagePrepping, cleaning and storing hard goods before and/or after an eventSetting up wedding floral & decor on event daysDelivery of personal flowers (e.g. bouquets, boutonnieres) to wedding part

Newark, NJ 07105 • (41.3 miles) • Full Time • 10/7/2026

Schmidt BakingIndependent Operatorsg Company seeks of Bread Routes. Schmidt Baking Company is family owned with home offices in Baltimore, Md, having distribution centers in Maryland, Pennsylvania, New Jersey, New York, Connecticut, and Virginia.This is an exciting opportunity for Route Distributors with a desire to own their own business in an essential industry.We are looking for self-motivated, growth minded individuals who have a passion for delivering 100% Customer Satisfaction through consistent service and predictable, high quality products.Full Equity Ownership!Excellent Earning Opportunities on established sales levelsFull lines of premium productsFinancing availableBakery Route/Sales experience a plus but not requiredRoutes & Delivery Vehicles available in many areas including Sh

Mahwah, NJ 07430 • (16.4 miles) • Full Time • 10/7/2026

As Sr. Quality Manager, you will be responsible for leading HYTORC's quality operations and supporting the continued development and effectiveness of the company's Quality Management System (QMS). This role will manage and support key quality functions, including Quality Engineering, Quality Control, Supplier Quality, Calibration, Document Control, Compliance, and related EH&S activities as assigned.The Sr. Quality Manager will help maintain compliance with ISO 9001:2015 and ISO 17025:2017 requirements, support customer, supplier, internal, and third-party audits, and drive practical improvements across manufacturing, distribution, assembly, machining, and final product verification activities.The ideal candidate will bring strong hands-on experience in quality systems for manufacturing an

Saddle Brook, NJ 07458 • (19.6 miles) • Full Time • 10/7/2026

Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement.Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a differenc

Allendale, NJ 07401-1617 • (20 miles) • Full Time • 10/7/2026

Description: The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly.Duties and Responsibilities:Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis.Clear area of previous job materials.Completes job cards, routers and job documentation as required.Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable ass