Owego, NY 13827 • (7.6 miles) • Full Time • 10/6/2026

Job Title: Electrical EngineerJob DescriptionThis role offers an experienced Electrical Engineer the opportunity to design, document, and test advanced digital circuit cards from concept through integration and verification. You will work closely with a multidisciplinary development team to create highquality hardware designs, produce robust documentation, and ensure successful integration and testing of complex electronic systems using industryleading tools.ResponsibilitiesDesign, document, and test digital circuit cards in support of complex electronic systems.Develop detailed specification documentation during the design phase to clearly define design requirements and performance expectations.Capture electrical schematics accurately using industry-standard electronic design automation t

Endicott, NY • (15.4 miles) • Full Time • 10/6/2026

Position DescriptionSpecialized assignment focused on creating manufacturing work instructions and procedures, converting them from current instruction system.Complete assignments to improve manufacturing processes and procedures, based on LEAN assembly principles.Plans sequence of operations and specifies procedures for assembly, dis-assembly, soldering, component removal/installation, coating and otherwise preparing basic material, exercising judgment in compromising between conflicting requirements, economic evaluation of methods and operator effectiveness and comfort.Design sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. SAFETY• Maintain compliance to all aspects of Safety• Proactively maint

Conklin, NY • (26.5 miles) • Full Time • 10/6/2026

Job Duties:Under the direction of the Operational Team Leader and/or general supervision, is responsible for the safe and efficient operation of machines to produce ends within prescribed quality specifications, using established Best Practices.Job Responsibilities:Ensure safe and efficient operation of machinery and mechanical equipment by completing preventive maintenance tasks within an established computerized maintenance management system (CMMS).Adhere to documented quality, operational, and visual standards, and procedures to support and protect our partners’ brands.Provide accurate communication of safety, quality, and deliverables within available documentation systems.Setup, run, adjust, repair, evaluate, and maintain end line equipment.Promote the Trivium Production System (TPS)

Corning, NY • (37.1 miles) • Full Time • 10/6/2026

Required skills: Minimum 1 year (2-5 preferred) injection molding experience.Scope of Position (i.e. projects involved with and role within group):• Set up and configure injection molding machines, auxiliary equipment, and molds according toexperimental plans.• Operate and monitor machines during experimental and production runs to ensure optimal performance.• Diagnose and resolve process or equipment issues, including machine malfunctions and molding defects.• Perform routine maintenance on molds, machines, and auxiliary equipment to minimize downtime andensure reliability.• Maintain accurate documentation of machine settings, experimental data, and maintenance activities.• Follow all safety protocols and procedures to ensure a safe working environment.Education and Experience (minimum re

Cortland, NY • (40.4 miles) • Full Time • 10/6/2026

Bring more to life.Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics, and biotechnology?At Pall Corporation, one of Danaher’s 15+ operating companies, our work saves livesand we’re all united by a shared commitment to innovate for tangible impact.You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety, and environmental

Painted Post, NY 14870 • (41.3 miles) • Full Time • 10/4/2026

Duration: 12 months with possible extensionRequired Education/Experience: Minimum of HS Diploma. Degree not required. 5 years proven hands on experience required. Proven capability in mechanical design, detailing, manufacturing support, and equipment development is valued more than specific credentials. Position SummaryWe are seeking an experienced Mechanical Design Technician or Mechanical Designer to support the development of custom equipment, fixtures, tooling, prototypes, and manufacturing systems.The successful candidate will transform conceptual designs and engineering direction into complete, manufacturable mechanical designs ready for procurement, fabrication, assembly, and deployment.This role requires strong practical mechanical design experience, expertise with SolidWorks and S

Freeville, NY 13068 • (32.4 miles) • Full Time • 10/1/2026

Incodema3D is seeking a skilled and detail-oriented CNC Machine Operator to join our team on 1st Shift(Monday-Friday, 6:00 AM - 2:30 PM). Incodema3D has a unique and innovative team, focused on additive manufacturing technology for the aerospace, defense, and other industrial applications. We foster a positive work environment and value employee commitment.Job SummaryThe CNC Machine Operator will be responsible for producing machined parts by setting up, operating, and maintaining CNC machines and equipment, including mills, lathes and wire EDM's. The ideal candidate will be detail-oriented and results-driven.ResponsibilitiesPrepare and operate CNC machines to perform tasks such as drilling, grinding, and milling.Read blueprints and mechanical drawings to interpret specifications and desir

Painted Post, NY 14870 • (41.3 miles) • Full Time • 9/25/2026

Key ResponsibilitiesOperate CT scanner to support development and manufacturing activitiesPerform image analysis (automated and manual) and communicate findings to requestorsDrive independent analyses, ask thoughtful questions, and propose next stepsProvide logistical support for workflow coordination and schedulingSet up measurement equipment independently after trainingCollect and enter data accurately into ExcelCollaborate with engineers in a plant environmentFollow safety regulations and use required PPE and ergonomic equipmentRequired Qualifications2+ years of experienceAssociate's DegreeDegree in STEM, Engineering Technology, Manufacturing, IT, Math, or related fieldSkillsCT Scanning OperationImage AnalysisMeasurement Equipment SetupMicrosoft ExcelMicrosoft WordMicrosoft OutlookWorkf

Corning, NY • (37.1 miles) • Full Time • 9/22/2026

Title: Mechanical Designer IIILocation: Sullivan Park in Corning, NY| OnsitePay Rate: $55 /Hr on W2Type& Duration: 12 plus months contract possibility of extension based on demand.Scope of this position:We are seeking an experienced Mechanical Design Technician or Mechanical Designer to support the development of custom equipment, fixtures, tooling, prototypes, and manufacturing systems.The successful candidate will transform conceptual designs and engineering direction into complete, manufacturable mechanical designs ready for procurement, fabrication, assembly, and deployment.This role requires strong practical mechanical design experience, expertise with SolidWorks and SolidWorks PDM, and a thorough understanding of manufacturing methods, mechanical components, tolerancing, assembly pra

Binghamton, NY • (23.1 miles) • Full Time • 9/11/2026

Job Description:The Printed Circuit Board Assembly Test Technician performs test and troubleshooting on printed circuit board assemblies (PCBA’s) and operates PCBA assembly and test equipment to support department output objectives.This position reports directly to the Manager of Operations & Service.Perform a variety of complex technical functions related to the assembly, test and troubleshoot of PCBA’s.Run Genrad Test and Flying Probe Test Machines.Perform troubleshooting of failed PCBA’s and PCBA’s removed from top level assemblies, to the component level. Utilize assembly prints, mechanical part drawings, schematics, and electronic equipment such as DMM’s, oscilloscopes, function generators, power supplies, frequency counters, pressure indicators, etc.Effectively perform, document and

Binghamton, NY 13904 • (28.2 miles) • Full Time • 10/6/2026

Triple Cities Metal Finishing is looking for Plating Line Operators to join our team. Plating Line Operators are responsible for safely and efficiently operating our plating lines while maintaining the quality of finished parts.This is a hands-on manufacturing position that involves loading and unloading parts, operating plating equipment, monitoring the plating process, performing basic quality checks, and maintaining a clean and organized work area.Previous plating or metal finishing experience is preferred, but we are willing to train the right candidate.What You'll DoSet up, operate, and monitor plating line equipment and tanks.Rack and un-rack parts throughout the plating process.Move parts through the plating line according to established procedures and customer requirements.Monitor

Horseheads, NY 14845 • (27.5 miles) • Full Time • 10/5/2026

Salary: $20 per hour + none Reference: 1133007-26 Ready for new opportunities as a machine operator helper? Ever worked with machines in industrial settings? Done both? If any of those things are true, you should know that we're hiring people with your skill set today. You'll hone your highly in-demand skill set, be exposed to new areas of the worksite and gain valuable experience in a fast-paced environment. Plus, great weekly pay as well as terrific benefits are included in the offering. Apply today and if you're a qualified candidate, you'll hear back from us shortly.location: Horseheads, NY work hours: Variablequalifications: up to 35 lbs. (medium lifting)skills: Perform machine set up, calibration and maintenanceLoad, unload materials & equipmentProficiency in operating injection mold

Owego, NY 13827 • (7.6 miles) • Full Time • 10/5/2026

POSITION RESPONSIBILITIES: Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws. May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures.REQUIRED EDUCATION: Accredited High School Diploma or GED.WORK HOURS: Full-Time- Thursday through Sunday 05:00am-03:30pm\nCompany DescriptionJoin Chipton-Ross, one of the nation's leading staffing firms supporting the aerospace, defense, engineering, and technology industries.C

Binghamton, NY 13901 • (26.3 miles) • Full Time • 10/4/2026

Machine OperatorCentroMotion | Elliott Mfg.Binghamton, New YorkWelcome to CentroMotion, a global leader in manufacturing friction products, information and control devices, mechanical power transmission products, and thermal and motion controls. Our solutions are used in transportation, agriculture, construction, mining and industrial environments, and are designed to meet the unique needs of OEMs and aftermarket networks.At CentroMotion, we pride ourselves on deep subject matter expertise, long-term partnerships, and a drive for innovation and continuous improvement to help our customers achieve their goals. Our brands, including Carlisle Brake & Friction, Elliott Mfg., Gits Mfg., maximatecc, Power-Packer and Weasler Engineering, are recognized for their quality and reliability.Join us an

Cortland, NY 13045 • (39.4 miles) • Full Time • 9/19/2026

PET Filler OperatorWhy ByrneAt Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise.Pay and BenefitsHourly Range – $26.50 - $37.50 per hourCompetitive bonus programsMedical, Dental, Vision benefits available day 1 of employmentSupplemental benefits available on day 30 of employmentEligible for 401 (k) with a company match available on day 90 of employmentEducational Support via tuition reimbursement and scholarship programWork Shift and Location3156 Byrne Hollow Crossing Cortland, NY 13045N2 6pm-630am rotati

Owego, NY • (9.1 miles) • Full Time • 9/15/2026

Machine Operator - 2nd & 3rd shift Location: Owego, NYJob ID: #73148Pay Range: $ 19 - $21 (2nd shift) Pay Range: $ 17 - $20 (3rd Shift) Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws. May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures.Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evalua

Meshoppen, PA 18630 • (30.2 miles) • Full Time • 9/15/2026

***This job has preference to qualified local job seekers within 60 miles of Axis Meshoppen, PA facility.The Snubbing Operator safely operates, coordinates, and supports snubbing unit activities at well sites, including rig-up, rig-down, equipment operation, routine inspection, maintenance support, crew coordination, and preparation of equipment for subsequent jobs. This position supports safe and efficient pressure-control operations, promotes quality service and customer satisfaction, and performs work in outdoor oilfield environments. A valid state-issued driver license is required; Class A or B CDL with air brakes endorsement is preferred. The Snubbing Operator must be able to perform the essential functions of a physically demanding field role while following company policies, job-sit

Ithaca, NY 14850 • (28.9 miles) • Full Time • 10/5/2026

Description: The Scheduler/Backup Dispatcher plays a crucial role in coordinating route services for Gadabout Transportation Services Inc.Reporting to the Executive Assistant and the Executive Director, they will frequently work independently, and must be able to carry out assigned duties with minimal supervision.They must efficiently carry out assigned duties, demonstrating flexibility, strong communication, and organizational skills. Position may incur minimal overtime while learning, but is not expected to be excessive. 40 hours per week, with no weekends expected.Hourly wage commensurate with experience.Requirements: Duties and Responsibilities:1. Using Gadabout’s scheduling software, QRydes, a customized scheduling software:a. Schedule rides on Gadabout buses.b. Suggest alternatives i

Binghamton, NY • (23.1 miles) • Full Time • 9/27/2026

Hello,We have an Excellent Contract position for aPrinted Circuit Board Assembly Test Technicianto join a leading Company located in Binghamton, NY. Immediate Hire!Pay Rate: $20 - $25 DOEThe Printed Circuit Board Assembly Test Technician performs testing and troubleshooting on printed circuit board assemblies (PCBA's) and operates PCBA assembly and test equipment to support department output objectives.This position reports directly to the Manager of Operations & Service.Responsibilities:Perform a variety of complex technical functions related to the assembly, test, and troubleshooting of PCBA's.Run Genrad Test and Flying Probe Test Machines.Perform troubleshooting of failed PCBA's and PCBA's removed from top-level assemblies, to the component level.Utilize assembly prints, mechanical part

Owego, NY 13827 • (7.6 miles) • Full Time • 9/19/2026

Job Title:2nd shift AssemblerLocation:Owego, NYPay: $18-20/hrHours: 4/10, 2nd shift (330pm-130AM, Monday through Thursday)Company Summary:Our client is a proven leader in information technology, innovative strategic technical planning, and program management offering a professional level of expertise to their partners. Having been around for over fifty years our client provides the resources necessary for their team members to excel and reach their career goals in the IT industry.Position Summary:This Position requires the following specific technical and professional background: The ideal candidate will have a minimum of 2+years’ withMetal/Composite bonding.This is a contract to hire opportunityJob Responsibilities:Performs a variety of tasks ranging from repetitive to non-repetitive prod

Towanda, PA 18848 • (19.8 miles) • Full Time • 10/5/2026

Description: Position OverviewResponds to emergency service calls, 24 hours/day, 7 days/week, to perform tire repairs, replacements, and general service to tires and wheels at customer’s location, on the road, or at STTC. Responsible for delivering prompt, courteous and professional service to STTC internal and external customers. The person who takes this job should be willing to make customer satisfaction a number one priority, must be flexible and understand that job priorities will constantly change due to customer preference.Essential Job Functions (include the following. Other duties may be assigned.)Provide OTR tire service on large equipment, primarily at customer locations (quarries, mines, ports and construction sites).Mounting, dismounting, balancing, replacing, repairing of tru

Vestal, NY • (16.7 miles) • Full Time • 10/5/2026

About the Role:National Cable is hiring aerial utility construction laborers to support the building and maintenance of overhead fiber and coax systems. This hands-on role involves working outdoors, operating bucket trucks, and helping construct essential telecom infrastructure.Key Responsibilities:Build and repair aerial telecommunication systemsUse hand and power tools( e.g. drills, lashers, climbing gear)Operate heavy equipmentWork aloft using climbing hooks and laddersDirect traffic per DOT GuidelinesTravel and work at multiple locationsFollow all safety regulations and company proceduresRequired ExperienceValid driver's license(2+ years)1-3 years in telecom or construction (lineman experience preferred)Preferred Qualifications:OSHA 10 or 30Experienced in new builds, maintenance, overl

Middletown, PA • (17.3 miles) • Full Time • 10/5/2026

Direct Hire.Full Benefits.8 Hours Shift.Work Life Balance.401KHolidays Paid.Annual Bonus.Climate-Controlled Facility.The Mechanical Tool Repair performs duties required to maintain a quality service outlet for the repair of Hilti equipment. Maximize productivity within Repair Operations while delivering high-quality, timely repairs of Hilti tools and enhancing the value-added image associated with owning a Hilti tool. Provide best-in-class tool repair service in support of Hilti’s Lifetime Service value proposition.Maintain superior technical knowledge and skills through continuous professional development by studying and reviewing online repair manuals, schematics, and technical files.Perform high-quality repairs to Hilti products through proper problem diagnosis and application of prescr

Friendsville, PA 18818 • (17.4 miles) • Full Time • 9/28/2026

GREAT HOURLY RATE- FULL BENEFITSAre you looking for a new job or a company that pays well and provides full employee benefits? Join Paraco, a family-owned company that has been delivering clean energy and fueling life's moments for over 50 years. We take pride in being one of the largest privately-owned propane companies in the Northeast, serving eight states. Discover more about our careers by visiting Paraco Careers. Join us on this exciting journey toward a sustainable future.Our Service Technicians service LP propane gas appliances and deliver, install, and remove propane tanks for residential, commercial, and industrial customers. Service Technicians are dispatched to customers within our service area located in, but not limited to, Putnam, Westchester, Dutchess, and Fairfield Countie

Harpursville, NY 13787 • (37.2 miles) • Full Time • 9/17/2026

Description: Advance Testing Company, Inc. is currently seeking a full-time Construction Materials Technician for an Internship/Co-op to work on projects in the Northeastern United States.Advance Testing, an established New York-based construction materials testing and inspection firm, has opportunities available for individuals to perform testing and inspection of construction materials such as soils, aggregates, concrete, masonry and asphalt. Typical assignments include projects related to construction of roads, bridges, airports, tunnels, commercial and industrial buildings, schools, government and military sites, and material fabrication and production facilities.Successful candidates will be trained and certified to perform sampling and testing of soil, concrete, and asphalt materials

Tunkhannock, PA 18657 • (40.2 miles) • Full Time • 9/15/2026

Description: Tunkhannock Ford is seeking an experienced Automotive Technician to join our team. As an Automotive Technician, you will be responsible for diagnosing and repairing various automotive issues, performing routine maintenance and inspections, while ensuring satisfaction and safety.Job Responsibilities:Perform diagnostic tests and troubleshoot vehicle issues using specialized tools and equipment.Transmission and engine repairsSuspension and steering repairsWarranty and recall repairsFollow manufacturer specifications and guidelines.Maintain accurate records of service history, parts, and inventory.Communicate with customers, services advisors, and service managers on timeline for repairs and maintenance.Provide estimates or recommendations for repairs and maintenance.Adhere to all

Binghamton, NY 13901 • (26.3 miles) • Full Time • 10/5/2026

About the RoleThis leadership role within our MEP team will drive the design and management of electrical engineering projects, ensuring the successful execution of power distribution, lighting, and low-voltage systems across a variety of sectors. The Senior Electrical Engineer will provide technical oversight, mentorship, and strategic guidance, working closely with clients, internal teams, and stakeholders to deliver high-quality, sustainable solutions.This position is open to the following office locations; please indicate which office you would prefer when filling out an application:Binghamton, NYHorseheads, NYRochester, NYTowanda, PAWilliamsport, PAKey ResponsibilitiesLead and manage electrical engineering projects from concept through completion.Develop power distribution, lighting,

Apalachin, NY 13732 • (9.4 miles) • Full Time • 10/3/2026

About UsAt Larson Design Group (LDG), we’re more than an award-winning Architecture, Engineering, and Consulting firm; we’re a team of passionate professionals united by a bold purpose: creatively shaping our world. From designing innovative solutions to building stronger communities, we approach every project with vision, collaboration, and a commitment to excellence. As a 100% employee-owned company, every success we achieve belongs to all of us. That ownership mindset drives our decisions, inspires creativity, and fosters a culture where your voice matters. At LDG, you’ll find a dynamic, people-focused environment where we work hard, share knowledge, and celebrate wins together. We offer a flexible work environment, paid training for required licensure, competitive benefits, bonus plans

Cortland, NY 13045 • (39.4 miles) • Full Time • 10/1/2026

Instrumentation & Controls EngineerWhy ByrneAt Byrne, we foster a culture built on teamwork, excellence, and professionalism. Our greatest strength lies in the exceptional talent and dedication of our team members across every part of the organization. We value their contributions and ensure they’re recognized, rewarded, and compensated in ways that reflect their impact and expertise.Pay and BenefitsSalary Range – $88,000 - $116,500 per yearCompetitive bonus programsMedical, Dental, Vision benefits available day 1 of employmentSupplemental benefits available on day 30 of employmentEligible for 401 (k) with a company match available on day 90 of employmentEducational Support via tuition reimbursement and scholarship programWork Shift and Location6750 Benedict Road W East Syracuse, NY 130573

Binghamton, NY 13905 • (23.2 miles) • Full Time • 10/1/2026

Reporting to the Planning & Transformation Director, the Planning Manager providessupport across sub-regional planning for an assigned health system, driving theexecution of planning frameworks and implementation strategies across a complex landscape of clinical, behavioral health, and community-based partners. This position is dedicated to the planning and implementation projects led by Care Compass, through the NYS DOH Rural Health Transformation Program (RHTP).The Planning Manager brings knowledge and experience with health system structure, transformational change, regional partner relationships, and alignment of cross-sector stakeholders. This role ensures that planning and transformation work is regionally coordinated, supports integration across rural health care providers, and aims

Cortland, NY 13045 • (39.4 miles) • Full Time • 10/1/2026

CNC Lathe Setup & Programming MachinistBring more to life. Join Pall Corporationpart of Danaherwhere your machining expertise helps power breakthroughs in life sciences, diagnostics, and biotechnology.A day in this roleOn any given shift, you’ll transform prints into precision parts that keep critical systems running worldwide. You will:Set up and operate CNC and semiautomatic equipment in a continuous production environment to produce complex components, subassemblies, and finished assemblies from blueprints and work instructions.Upload and edit CNC programs, provide set-up sheets, deburr parts, sharpen tools, and configure tooling to achieve spec.Work largely independently while taking direction from the Production Supervisor and collaborating with experienced teammates.Maintain accurate

Waverly, NY 14892-9327 • (9.9 miles) • Full Time • 9/30/2026

Best Bev is a full service beverage contract manufacturing company located in Waverly, NY. Our mission is to provide our customers with the most affordable co-packing amenities while maintaining the highest quality. Our wide range of equipment means no order is too small or too large.Interested in an entrepreneurial work environment? Best Bev is the right fit for you! We take pride in providing our employees with upward growth opportunities and the chance to develop meaningful relationships within the Best Bev family to build a long-lasting career!Best Bev offers competitive compensation and benefits to all our employees.Processing Technician Responsibilities: Follows all work instructions and SOPs, as well as Best Bev policies, procedures, GMPs (Good Manufacturing Practices) and safety ru

Endicott, NY 13760 • (15.4 miles) • Full Time • 9/30/2026

The Salvation Army's Adult Rehabilitation Centers make a difference in people's lives. Through the collection and resale of gently used goods, we are able to provide the financial support to assist men and women with a variety of social and spiritual afflictions. The in-residence rehabilitation program focuses on basic necessities with every man or woman being provided a clean and healthy living environment, good food, work therapy, leisure time activities, group and individual counseling, and spiritual direction. All our effort is focused on developing life skills and a personal relationship with God through Jesus Christ. More than just a job, each member of the team contributes to recycling goods that literally recycle and repair broken lives.Job Details:The Salvation Army Adult Rehabili

Binghamton, NY 13901 • (26.3 miles) • Full Time • 9/30/2026

JOB SUMMARY/OBJECTIVEThe Manufacturing Associate Assembly 1 is an entry-level production position responsible for the assembly, preparation, and inspection of cable assemblies and related electronic manufacturing products in a fast-paced manufacturing environment. This role performs routine production tasks following established work instructions, drawings, and quality standards while developing foundational manufacturing and assembly skills.The Manufacturing Associate Assembly 1 is expected to learn basic cable assembly processes, proper tool usage, manufacturing documentation, and quality requirements while supporting production schedules and company objectives. This position works under direct supervision and receives on-the-job training based on assigned manufacturing areas and product

Greene, NY 13778 • (37.4 miles) • Full Time • 9/29/2026

Description: New York Bus Sales, the largest authorized Blue Bird School Bus dealership in New York State currently has an immediate opening for a Shop Supervisor at a location servicing school buses in Greene, NY.JOB SUMMARY: The primary function of the Shop Supervisor is to ensure vehicles get inspected, repaired and ready for service in the allotted amount of time set by the Service Manager. The Shop Supervisor is a working foreman and supervises employees while filling in where needed.SUPERVISION:General Supervision- The shop supervisor develops procedures for performance for a variety of duties; or performs complex duties within established policy guidelines. Most assignments are completed independently.PRIMARY DUTIES AND RESPONSIBILITIESOrganize, direct, and perform repair work that

Endicott, NY 13760 • (15.4 miles) • Full Time • 9/27/2026

Description: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952.Benefits:Competitive salary and benefits packageOpportunity to work with a team of talented professionalsChallenging and rewarding work environmentGenerous Paid Time OffSeveral health insurance plan opti

Cortland, NY 13045 • (39.4 miles) • Full Time • 9/25/2026

About the Role:The Weld Parts Cleaner-Grinder plays a critical role in ensuring the quality and finish of welded components by meticulously cleaning and grinding welds to meet precise specifications. This position requires a keen eye for detail to identify imperfections and apply appropriate techniques to smooth and prepare parts for subsequent manufacturing stages or final assembly. The role contributes directly to the overall product integrity and safety by removing excess material, slag, and other welding residues. The successful candidate will work closely with welding and quality assurance teams to maintain high standards and support production efficiency. This position demands consistent adherence to safety protocols and the ability to work with various hand and power tools in a manu

Spencer, NY 14883 • (16.1 miles) • Full Time • 9/24/2026

Position Summary The goal of the Production Associate is to optimize employee and equipment effectiveness and efficiency, and to reduce waste and meet company objectives. Works under direct guidance of Team Lead. Supervisor Responsibilities:NoneDuties and Responsibilities: Understands and complies with company food safety program and regulatory requirements to ensure the safe production of food.Complies with company safety/environmental program and regulatory requirements.Demonstrates company values and vivid vision.Complete all tasks with honesty and integrity.Participates in preventing errors occurring in production.Maintaining a clean, organized and audit ready work station at all times.Ensures that production and food safety documents are accurate and completed.Completes timely changeo

Binghamton, NY 13904 • (28.2 miles) • Full Time • 9/24/2026

We are looking for exceptional individuals to join our growing team. This is a Monday through Friday, no weekends opportunity. If youtake pride in your work and are committed to assuring consistent quality,appearance, and accuracy of outgoing orders, this is the position for you! We offer a great benefit package that includes medical, dental, vision, 401K, and PTO/Vacation.What you’ll do on a typical day:Examine stock and brokered parts for wear and defects and compares with records such as purchase orders and work orders to verify accuracyRecord discrepancies in the part’s description such as unrecorded damage on the purchase order or work order. Works with internal resources to rectify problems foundExamines part’s appearance to confirm it meets established company standardResponsible do

Owego, NY 13827 • (7.6 miles) • Full Time • 9/24/2026

Chipton-Ross is seeking a Manufacturing Plannerfor a contract opportunity in Owego, NY.BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE):Great communicatorAnalytical skills with experience in databasesTechnical BackgroundManufacturing or Military Specification experiencePLM Software (PTC products preferred)Must be able to solve technical problems with minimal direction (system errors and data mismatch)POSITION RESPONSIBILITIES:You will work closely with Manufacturing Engineers, Master Data Analysts, and Component Engineers to improve the quality of manufacturing part attribute data. At it's heart much of the role comes down to maintaining a good database of part data. Database administration is a key resource for Manufacturing Engineers allowing for greater adaptability, flexibility, and f

Cortland, NY 13045 • (39.4 miles) • Full Time • 9/21/2026

Overview: Seeking an individual with experience to operate a Stan Steel hot mix drum plant. The successful candidate will be familiar with Blacktop, aggregate, and hot oil types and the general nature of hot mix asphalt production. The successful candidate needs to be willing to work potentially long days, and some Saturday's and some nights during the busy season. The loader operator and ground person will assist in all maintenance and repair tasks.Safety Expectations: All Suit-Kote employees are required to comply with all safety rules and to observe safe work practices and operating procedures at all times. Whenever on Suit-Kote property or job sites, or operating Suit- Kote equipment, employees are expected to conduct themselves in a manner that promotes the safety of the employee, co-