Please Accept our Privacy Policy
ilocatum
Binghamton, NY 13903 • (12.5 miles) • Full Time • 11/15/2026
Equipment Engineer - Automated Manufacturing Equipment Binghamton, NY (Onsite) If you'd rather fix machines than write PLC code from scratch, this is your role: keep automated and legacy production equipment running at peak uptime. Must-Haves 3+ years of hands-on equipment, automation, or manufacturing engineering supporting production Strong mechanical and electro-mechanical troubleshooting Working knowledge of PLC/HMI for diagnostics (advanced programming not required) Experience with machine vision, robotics, motion, pneumatics, welding, or fastening systems BS in Mechanical, Electrical, Manufacturing, or Mechatronics Engineering, or AAS with strong automation experience What You'll Do Troubleshoot, commission, and optimize new automated and legacy equipment Pinpoint whether issues areIGNITECH SOLUTIONS
Middletown, PA • (25.7 miles) • Full Time • $129.00 to $132.00 / hr • 11/20/2026
Senior R&D / Product Development Engineer - High-Speed Interconnect Validation - CONTRACT Location: Middletown, PA 17057 Work arrangement: On-site Openings: 2 Experience: Minimum 8 years Relocation assistance: Not available Visa sponsorship: Not available Job Type - Contract Position Overview Seeking a senior engineer to lead interoperability, product validation and regression automation for next-generation active connectivity products supporting 800G, 1.6T and future high-speed networking platforms . This hands-on technical leadership role spans embedded firmware, systems engineering, Ethernet networking, automated testing and manufacturing readiness. The engineer will define validation strategies, investigate complex interoperability issues and develop scalable test infrastructure in col
Aerotek
Middletown, PA • (25.7 miles) • Full Time • 11/16/2026
Electronic Assemblers Needed Middletown, PA Pay Rate: $19.25$21.25/hour (based on experience/shift) Available Shifts: 1st shift : 7am to 3pm 2nd Shift: 3PM 11:30 PM 3rd Shift: 11PM 7:30 AM Responsibilities Hand-assemble electronic components, wire harnesses, cable boxes, and related products Cut, strip, and crimp cables and hardware Route wires and install electrical components Read and interpret blueprints and assembly instructions Operate basic manufacturing equipment and machinery Use measuring tools and fixtures to ensure accuracy Inspect, test, and package finished products Accurately record production and quality data Perks & Benefits Long-term career growth opportunities Clear pathways to leadership positions On-site gym and cafeteria Casual dress code (long pants and closed-toe shoNATIONAL CABLE CRAFT CORP
Vestal, NY • (18.8 miles) • Full Time • $18.00 to $30.00 / hr • 11/3/2026
About the Role: National Cable is hiring aerial utility construction laborers to support the building and maintenance of overhead fiber and coax systems. This hands-on role involves working outdoors, operating bucket trucks, and helping construct essential telecom infrastructure. Key Responsibilities: Build and repair aerial telecommunication systems Use hand and power tools( e.g. drills, lashers, climbing gear) Operate heavy equipment Work aloft using climbing hooks and ladders Direct traffic per DOT Guidelines Travel and work at multiple locations Follow all safety regulations and company procedures Required Experience Valid driver's license(2+ years) 1-3 years in telecom or construction (lineman experience preferred) Preferred Qualifications: OSHA 10 or 30 Experienced in new builds, maiCH Thompson Finishing
Binghamton, NY 13901 • (14 miles) • Full Time • $17.50 to $21.50 / hr • 11/20/2026
CH Thompson is looking for a Quality Inspector to join our team! If you have a great eye for detail, enjoy hands-on work, and take pride in getting the little things right, this could be a great opportunity for you. About the Job As a Quality Inspector, you'll work at a designated inspection table processing repeat customer parts. You'll visually inspect painted parts for defects, carefully remove masking materials, and perform touch-up work when necessary to ensure the finished part meets customer requirements. This is a hands-on, detail-oriented production role where consistency and attention to detail are critical. You'll become familiar with the specific requirements of the customers and parts you work with and learn what to look for during each inspection. What You'll Do Visually inspChipton-Ross
Owego, NY 13827 • (30.6 miles) • Full Time • $22.00 to $25.00 / hr • 11/19/2026
Chipton-Ross is seeking a Manufacturing Plannerfor a contract opportunity in Owego, NY. BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): Great communicator Analytical skills with experience in databases Technical Background Manufacturing or Military Specification experience PLM Software (PTC products preferred) Must be able to solve technical problems with minimal direction (system errors and data mismatch) POSITION RESPONSIBILITIES: You will work closely with Manufacturing Engineers, Master Data Analysts, and Component Engineers to improve the quality of manufacturing part attribute data. At it's heart much of the role comes down to maintaining a good database of part data. Database administration is a key resource for Manufacturing Engineers allowing for greater adaptability, flexibiliEducation & Training Resources LLC
Oneonta, NY 13820 • (42.5 miles) • Full Time • $19 / yr • 11/18/2026
Position Function: * This is an entry-level position.* This is not a remote position, and it does not offer relocation assistance. We are seeking a full-time individual who can perform various clerical and data entry functions per company and government guidelines and regulations. Shift: Monday-Friday, 8:00am-5:00pm Major Duties and Responsibilities for this role will include: Preparing folders for new student arrivals Establishing and maintaining files for recording students' academic and Career Technical Training Progress, pay status, travel, clothing allowance status, attendance reports, and other required information Maintaining accurate accountability of records in correlation with (CIS) Center Information Systems, including tracking and follow-up of missing documentation via weekly aM.C. Dean, Inc
Binghamton, NY • (13.1 miles) • Full Time • $32.00 to $46.00 / hr • 11/18/2026
Overview About M.C. Dean M.C. Dean is Building Intelligence®. We design, build, operate, and maintain cyber-physical solutions for the nation’s most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and foAmphenol Aerospace
Endicott, NY • (20.9 miles) • Full Time • $62,354 to $85,000 / yr • 11/16/2026
The Role - Amphenol Commercial Air is seeking a Design Engineer (Busbars) to work out of its new facility in Endicott, NY. The Design Engineer (Busbars) will focus on flexible and rigid busbars. They must have the ability to make design layouts and production drawings; must be capable of assuring form, fit, and function of components through dimensional studies, and correlate engineering data to customer specifications. The key responsibilities of the Design Engineer (Busbars) include, but are not limited to: Prepares designs and specifications, assists in generation of layouts Creates design standards for high voltage and high-power busbars Ability to make drawings for production and customers Coordinate the manufacturing of customer prototypes Interfaces with other departments for the maI3 Assembly
Binghamton, NY 13901 • (14 miles) • Full Time • $18.00 / hr • 11/13/2026
** 2nd Shift Position JOB SUMMARY/OBJECTIVE: The Quality Inspector 1 will be responsible for ensuring that the products produced by a company meet the required quality standards. The job involves checking the quality of incoming and outgoing materials or products, running tests, keeping a record of defects, analyzing products, and overseeing procedures. They also measure the specifications of random items in each production run, and train team members to refine production quality. The Quality inspector will monitor manufacturing operations, test products for flaws, and report defects. They read blueprints and specifications, monitor operations to ensure that they meet production standards, recommend adjustments to the assembly or production process, inspect, test, or measure materials, andActalent
Owego, NY 13827 • (30.6 miles) • Full Time • $60.00 to $72.00 / hr • 11/11/2026
Hiring!PCB Design Engineer Secret Clearance Location: Owego, NY Schedule: 4x10 First Shift Contract Length: 48 Weeks This position is being offered as a contract assignment. While many contractors are eventually considered for direct employment based on performance and business needs, conversion is not guaranteed. Contract extensions may also be possible depending on project requirements. Pay: $60-$72/hr We are seeking a PCB Design Engineer with an active Secret Clearance to support the design, testing, troubleshooting, and verification of advanced electronic hardware systems. Responsibilities Design and modify printed circuit boards (PCBs) and circuit card assemblies (CCAs) Support hardware builds and product development activities Conduct hands-on troubleshooting, testing, and engineerinMastech Digital
Binghamton, NY • (13.1 miles) • Full Time • $25.00 to $29.00 / hr • 11/10/2026
Job Description: The Printed Circuit Board Assembly Test Technician performs test and troubleshooting on printed circuit board assemblies (PCBA’s) and operates PCBA assembly and test equipment to support department output objectives. This position reports directly to the Manager of Operations & Service. Perform a variety of complex technical functions related to the assembly, test and troubleshoot of PCBA’s. Run Genrad Test and Flying Probe Test Machines. Perform troubleshooting of failed PCBA’s and PCBA’s removed from top level assemblies, to the component level. Utilize assembly prints, mechanical part drawings, schematics, and electronic equipment such as DMM’s, oscilloscopes, function generators, power supplies, frequency counters, pressure indicators, etc. Effectively perform, documenCare Compass Network
Binghamton, NY 13905 • (16.7 miles) • Full Time • $72,000 to $85,000 / yr • 11/4/2026
Reporting to the Planning & Transformation Director, the Planning Manager provides support across sub-regional planning for an assigned health system, driving the execution of planning frameworks and implementation strategies across a complex landscape of clinical, behavioral health, and community-based partners. This position is dedicated to the planning and implementation projects led by Care Compass, through the NYS DOH Rural Health Transformation Program (RHTP). The Planning Manager brings knowledge and experience with health system structure, transformational change, regional partner relationships, and alignment of cross-sector stakeholders. This role ensures that planning and transformation work is regionally coordinated, supports integration across rural health care providers, and aHunt-EAS
Binghamton, NY 13901 • (14 miles) • Full Time • $75,000 to $125,000 / yr • 11/3/2026
About the Role This leadership role within our MEP team will drive the design and management of electrical engineering projects, ensuring the successful execution of power distribution, lighting, and low-voltage systems across a variety of sectors. The Senior Electrical Engineer will provide technical oversight, mentorship, and strategic guidance, working closely with clients, internal teams, and stakeholders to deliver high-quality, sustainable solutions. This position is open to the following office locations; please indicate which office you would prefer when filling out an application: Binghamton, NY Horseheads, NY Rochester, NY Towanda, PA Williamsport, PA Key Responsibilities Lead and manage electrical engineering projects from concept through completion. Develop power distribution,Triple Cities Metal Finishing
Binghamton, NY 13904 • (9.2 miles) • Full Time • $62,500 to $68,000 / yr • 10/30/2026
Triple Cities Metal Finishing is currently seeking a Quality Process Control Engineer to join our team. As a Quality Process Control Engineer, you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, the role focuses on ensuring that engineering and manufacturing processes are performed correctly and to the highest standards. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, constructiDonatech Corporation
Endicott, NY 13760 • (22.3 miles) • Full Time • $46.00 to $51.50 / hr • 10/28/2026
Position would require the candidate to be a W2 employee of Donatech. US Citizenship/Permanent Resident Required. We are looking for a Supplier Quality Engineer to implement tools and processes to ensure suppliers improve on current products with robust plans and deliver first time quality to program customers. Additionally, this person will be responsible for qualifying new suppliers for the program. The person will also investigate, evaluate, and resolve supplier quality problems and conducting audits, analyzing defect trends, and leading continuous improvement projects. The Supplier Quality Engineer will conduct capability assessments that verify supplier qualifications, travel to assigned suppliers, perform onsite source inspections, and lead multiple projects to completion. You must bHEPCO, Inc.
Endicott, NY 13760 • (22.3 miles) • Full Time • $48.00 to $52.00 / hr • 10/28/2026
We are seeking a Supplier Quality Engineer for our client to drive supplier performance, qualify new suppliers, and resolve quality issues through inspections, audits, and continuous improvement initiatives. Monitor supplier scorecards and performance metrics, develop improvement plans, and drive first-time quality and zero-defect performance. Qualify new suppliers through capability assessments and on-site evaluations. Conduct supplier audits and source inspections, analyze defect trends, and lead improvement projects through completion. Evaluate nonconforming products and supplier corrective actions, communicating findings and impacts to program teams. Lead 8D problem-solving and root cause corrective actions to prevent recurring nonconformances. Perform Production Process VerificationsLanceSoft Inc
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $50.00 to $93.00 / hr • 10/28/2026
Description: The engineer have 10 years of experience with required tools and will design, document, and test digital circuit cards. During the design phase they with develop specification documentation and capture the electrical schematics. Post design, they will work integration and develop design verification tests. They will work with the broader development team to deliver documentation, develop circuit card design data, and perform integration and test on the developed hardware. REQUIRED TOOLS: HyperLynx - Siemens Ansys HFSS Xpedition - SiemensICONMA, LLC
Owego, NY 13827 • (30.6 miles) • Full Time • $88.00 to $93.00 / hr • 10/28/2026
Our Client, an Aerospace and Defense company, is looking for an Electrical Engineer for their Owego, NY location. Responsibilities: During the design phase they with develop specification documentation and capture the electrical schematics. Post design, they will work integration and develop design verification tests. They will work with the broader development team to deliver documentation, develop circuit card design data, and perform integration and test on the developed hardware. Requirements: HyperLynx - Siemens Ansys HFSS Xpedition - Siemens 10+ yrs of experience The engineer have 10+ years of experience with required tools and will design, document, and test digital circuit cards. Why Should You Apply? Health Benefits Referral Program Excellent growth and advancement opportunitiesMindlance
Owego, NY 13827 • (30.6 miles) • Full Time • $90.00 to $93.00 / hr • 10/28/2026
The engineer have 10+ years of experience with required tools and will design, document, and test digital circuit cards. During the design phase they with develop specification documentation and capture the electrical schematics. Post design, they will work integration and develop design verification tests. They will work with the broader development team to deliver documentation, develop circuit card design data, and perform integration and test on the developed hardware. REQUIRED TOOLS: HyperLynx - Siemens Ansys HFSS Xpedition - Siemens EEO: “Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans. ”DJ Acquisition Management Corp
Endicott, NY 13760 • (22.3 miles) • Full Time • $85,000 to $110,000 / yr • 10/27/2026
Description: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: Competitive salary and benefits package Opportunity to work with a team of talented professionals Challenging and rewarding work environment Generous Paid Time Off Several health insurance plaSOCOTEC
Harpursville, NY 13787 • (9.8 miles) • Full Time • $18.00 to $20.00 / hr • 11/16/2026
Description: Advance Testing Company, Inc. is currently seeking a full-time Construction Materials Technician for an Internship/Co-op to work on projects in the Northeastern United States. Advance Testing, an established New York-based construction materials testing and inspection firm, has opportunities available for individuals to perform testing and inspection of construction materials such as soils, aggregates, concrete, masonry and asphalt. Typical assignments include projects related to construction of roads, bridges, airports, tunnels, commercial and industrial buildings, schools, government and military sites, and material fabrication and production facilities. Successful candidates will be trained and certified to perform sampling and testing of soil, concrete, and asphalt materiaTunkhannock Ford
Tunkhannock, PA 18657 • (40.1 miles) • Full Time • 11/11/2026
Description: Tunkhannock Ford is seeking an experienced Automotive Technician to join our team. As an Automotive Technician, you will be responsible for diagnosing and repairing various automotive issues, performing routine maintenance and inspections, while ensuring satisfaction and safety. Job Responsibilities: Perform diagnostic tests and troubleshoot vehicle issues using specialized tools and equipment. Transmission and engine repairs Suspension and steering repairs Warranty and recall repairs Follow manufacturer specifications and guidelines. Maintain accurate records of service history, parts, and inventory. Communicate with customers, services advisors, and service managers on timeline for repairs and maintenance. Provide estimates or recommendations for repairs and maintenance. AdhGenesis10
Olyphant, PA 18447 • (38.1 miles) • Full Time • 10/28/2026
Genesis10 is seeking a Mechatronics & Robotics Technician (MRT) for a full-time position with our client. Compensation : $28.44/hr plus $2/hr night differential Must be flexible with shift options The Mechatronics and Robotics Technician is responsible for installing, maintaining, troubleshooting, and repairing automated machinery, robotic systems, and related electrical and mechanical equipment. This role supports the reliable operation of manufacturing and automation systems. Key Responsibilities: Promote a safe working environment by following all safety procedures. Maintain and troubleshoot all automated conveyor systems in the building. Perform preventive maintenance on machinery and robotic systems. Install, maintain, and troubleshoot relay logic, ladder diagrams, control components,Paraco Gas Corp
Deposit, NY 13754 • (11.6 miles) • Full Time • $26.00 to $36.00 / hr • 10/24/2026
GREAT HOURLY RATE- FULL BENEFITS Are you looking for a new job or a company that pays well and provides full employee benefits? Join Paraco, a family-owned company that has been delivering clean energy and fueling life's moments for over 50 years. We take pride in being one of the largest privately-owned propane companies in the Northeast, serving eight states. Discover more about our careers by visiting Paraco Careers. Join us on this exciting journey toward a sustainable future. Our Service Technicians service LP propane gas appliances and deliver, install, and remove propane tanks for residential, commercial, and industrial customers. Service Technicians are dispatched to customers within our service area located in, but not limited to, Putnam, Westchester, Dutchess, and Fairfield CountManpower
Tunkhannock, PA 18657 • (39.4 miles) • Full Time • 11/11/2026
Our client, a leading manufacturing company, is seeking a Production Associate to join their team. As a Production Associate, you will be part of the production department supporting various teams. The ideal candidate will have strong attention to detail, excellent teamwork skills, and a proactive attitude which will align successfully in the organization. Job Title: Production Associate Location: Mehoopany, PA Pay Rate: $19-$19/50/hr Shifts: 12 hour shifts, Days and Nights Available 2-2-3 schedule, every other 3 day weekend off! Medical, dental and vision insurance and PTO! What's the Job? Perform manual production tasks such as packet placing, repacking, case stacking, pack-off, and final product inspections. Ensure quality standards are met throughout the production process. CollaboratePrompton Tool
Honesdale, PA 18431 • (36.9 miles) • Full Time • $18.00 to $28.00 / hr • 11/20/2026
CNC Lathe Machinist We are seeking an experienced CNC Lathe Machinist to join our manufacturing team. The successful candidate will set up, operate, and inspect precision-machined components while maintaining high standards for quality and safety. Responsibilities: Set up and operate CNC Lathes. Read and interpret engineering drawings and GD&T Select tooling, offsets, speeds, and feeds Inspect parts using micrometers, calipers, gauges, and other measuring equipment Perform minor program edits and troubleshoot machining issues Maintain a clean, safe, and organized work area Requirements: Previous CNC lathe or turning experience is a must. Ability to read complex drawings Knowledge of cutting tools, workholding, and inspection methods Strong attention to detail and commitment to quality AbilSterling Engineering Inc.
Carbondale, PA • (34.9 miles) • Full Time • 11/16/2026
Title : Mechanical Drafter Location : Carbondale, PA 18407 Hire Type : Direct Hire Salary Range : $50k-$55k Bonus : Monthly bonus opportunity up to 30% Benefits : Medical, Dental, Vision, 401(k), PTO, Paid Holidays Responsibilities Create detailed fabrication and shop drawings to support industrial manufacturing projects Serve as the primary technical resource for perforated pattern layouts Assist in the design and layout of new perforation patterns, including tool layout, material selection, and manufacturing processes Maintain engineering print files, tooling data, and drawing history for traceability and reference Support Customer Service by interpreting blueprints and confirming customer specifications and tolerances Develop sample perforation patterns and pre-production drawings CreatLCBC Church
Clarks Summit, PA • (39.7 miles) • Part Time • 11/16/2026
Reports to: Clarks Summit Worship Leader Hours Commitment: 6 hours per week, every other week alternating with 1 other Production Technician. Hours per week include Sunday gatherings and 1 mid-week evening rehearsal. Objective: To promote life change by developing relationships and leading volunteers to create excellent environments by preparing, maintaining, and operating audio, video and lighting systems throughout the campus location. Personal Qualifications: Have a personal relationship with Jesus and demonstrate ongoing spiritual growth through everyday habits and practices. Support LCBC’s mission to introduce people to Jesus and together fully follow him, along with our ministry philosophy, priorities, and beliefs. Be a leader who is: Focused: Work hard with urgency and intensity ColSystem One
Archbald, PA 18403 • (39.1 miles) • Full Time • 11/14/2026
Manufacturing Engineer – Circuit Card Assembly First Shift 12 Month Contract position Are you passionate about electronics manufacturing and ready to make a real impact on the shop floor? Join our team as a Manufacturing Engineer supporting Circuit Card Assembly (CCA) operations, where your expertise will directly influence quality, efficiency, and throughput across advanced PTH and SMT production. This is a highly visible role for an engineer who thrives in a fast?paced manufacturing environment and enjoys solving complex problems from concept through production. What You’ll Do Support and optimize end to end Circuit Card Assembly for both PTH and SMT products Work hands-on with: Component forming & pick and place equipment Solder printing, hand soldering, wave & selective soldering ConfoNammo Defense System
Scranton, PA 18509 • (43.8 miles) • Full Time • 11/12/2026
Job Summary: The Production Planner/Contracts Admin provides support in production scheduling, planning, and overall organization of product shipment. This position reports directly to the Contracts Manager. Primary Responsibilities: · Capable of assisting in shipping related duties such as ordering trucks, completing shipping paperwork, organizing delivery schedules. · Ability to create work orders and production schedules. · Act as point of contact for DCMA transportation for Hazardous Shipping. · Use of working with government websites (i.e. WARP, WAWF, Transportation Module in PIEE) · Facilitate all IATA and DOT shipping processes. · Maintain hazardous shipping certifications. · Responsible for filing of DOT and FAA records. · Assist in audits such as, FAA, DOT, PHMSA, GFM. · Produce mCanpack
Olyphant, PA 18447 • (38.1 miles) • Full Time • $70,000 to $80,000 / yr • 11/11/2026
**Job Description Work Schedule:** Conventional Position Summary Ensure the accuracy and reliability of quality control systems and equipment by supporting process capability and continuous improvement across manufacturing operations, driving data-driven analysis, troubleshooting, and calibration activities to maintain compliance with regulatory, customer, and company standards, and contributing to product quality, operational efficiency, and risk management through technical expertise and collaborative problem-solving **Essential Functions/Key Deliverables ** Utilize statistical process control (SPC) techniques to support process capability and corrective actions Manage measurement system analysis, including inspection systems, gauge management, calibration, and analytical testing DevelopTheMasonGroup
Scranton, PA 18508 • (42.1 miles) • Full Time • 11/9/2026
Automation Programmer Job description: We are seeking a highly skilled Automation Engnieer with 3+ years of experience in PLC and HMI programming to join our team. This role will focus on designing, programming, and integrating advanced control systems across diverse industries. The ideal candidate is detail-oriented, collaborative, and able to lead projects from programming through startup, troubleshooting, and ongoing support. Key Responsibilities Develop, program, and integrate control systems, including PLC, OIT, HMI, reporting, and alarming software. Design and implement PLC, OIT, and SCADA system programs. Perform troubleshooting and provide technical support for field control systems and process equipment. Independently conduct system startups and commissioning activities. Review anFoth
Mehoopany, PA • (40.7 miles) • Full Time • 11/6/2026
Foth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 750 members across 33 locations are dedicated to solving our clients’ toughest science and engineering challenges . Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart and caring team, Foth may be the place for you. Join our team and experience the Foth difference that contributes to our impressive 92+% member retention rate ! Learn more at Join Foth as a Mechanical Engineer , where you'll play a key role in delivering innovative utility solutions for industrial clients. This is a unique opportuniShalePro Energy Services
New Milford, PA 18834 • (15.6 miles) • Full Time • 11/5/2026
Industrial Painter Responsibilities and Duties To accomplish their primary goal of painting and coating surfaces, Industrial Painters perform many tasks. Clean and Prepare Surfaces Industrial Painters must first prepare the surface they are going to paint. If there are previous finishes on the surface, they remove them using masking, grit blast, pressure washing, tool cleaning or chemical rinse. Then, they clean and smooth the surface and let it dry before painting. Prepare Paints Before starting a job, Industrial Painters prepare the paint they will use. They use measurement equipment such as viscosity cups, thickness gages and gloss gages to check the makeup of the paint, and use their understanding of chemistry to mix the appropriate compounds for the job. Many projects will require anAxis Energy Administration LLC
Meshoppen, PA 18630 • (33.5 miles) • Full Time • 11/2/2026
***This job has preference to qualified local job seekers within 60 miles of our Axis Meshoppen, PA facility. The Derrick Hand is part of a 4–5-person workover rig crew responsible for performing services on workover rigs. This position reports to the assigned Tool Pusher/Field Supervisor or Rig Operator. Primary responsibilities include performing elevated work on the derrick, including the tubing board and rod basket; completing routine maintenance on derrick structures or components; and supporting other workover rig functions as directed by the Tool Pusher or Rig Operator. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Assists the operator in rigging up and down, lining up the well service rig with the well; performs serviciLiberty Personnel Services, Inc
Scranton, PA 18519 • (41.6 miles) • Full Time • $65,000 to $120,000 / yr • 10/24/2026
Production Planning & Scheduling Manager Dickson City, PA A well established manufacturing company in Lackawanna County is seeking a Production Planning & Scheduling Manager to develop and maintain production schedules at their manufacturing facility and help ensure efficient workflow and on-time customer delivery. This role works closely with leaders across the company including Operations, Sales, and Engineering departments to balance production capacity, customer priorities, and available resources. The ideal candidate is highly analytical, detail-oriented, and comfortable working with ERP systems within a industrial manufacturing site. Responsibilities Develop and maintain production schedules within an ERP system. Monitor and maintain accuracy of production and scheduling data. CoordiRedbirdjobs
Middletown, PA • (25.7 miles) • Full Time • 11/15/2026
A small animal practice in the Harrisburg area of central Pennsylvania is hiring a full-time Associate Veterinarian. The practice offers medical, surgical, and dental care with an excellent staff-to-doctor ratio and a focus on preventive care and lifelong learning. Key Highlights: Flexible scheduling No on-call or late-night expectations; leave on time Excellent staff-to-doctor ratio Medical, surgical, and dental caseload Partnership opportunities through a national partnership network About You: DVM or VMD from an accredited school Valid Pennsylvania veterinary license, or eligible Benefits: $120,000 to $160,000 per year + production Generous sign-on bonus packages available Health, dental, vision, and retirement benefits, including 401(k) Generous CE allowance Licenses and dues covered PThe AZEK Group LLC
Scranton, PA 18504 • (44.3 miles) • Full Time • 11/11/2026
**Currently offering a $1,500.00 Sign on Bonus** Shift: 5:45am - 6:15pm 4days on 4days off rotation Pay Range: $18 per hour POSITION SUMMARY Responsible for properly performing activities relative to assisting the extrusion operator in efficiently operating the extrusion equipment and producing quality products within a large, 24/7 manufacturing environment. Critical features of this job are described under the headings below. They may be subject to change at any time. ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) ContrDempsey Uniform & Linen Supply
Jessup, PA • (42 miles) • Full Time • $18.05 / hr • 11/8/2026
Now Hiring: Industrial Housekeeper Do you take pride in keeping workplaces clean, safe, and professional? We're hiring an Industrial Housekeeper to help maintain the look and cleanliness of our facilities, including administrative offices, warehouses, production equipment, and other essential work areas. What You'll Do Clean and maintain a wide range of surfaces, removing dust, grease, and debris from industrial machines, conveyors, overhead piping, workstations, and other areas. Operate hand mops, dusters, and power floor scrubbers to achieve efficient, thorough floor cleaning. Collect and properly dispose of trash and recycling materials as part of daily janitorial duties. Maintain the appearance of outdoor spaces-including grounds, garden areas, sidewalks, stairways, building exteriors,Abronyx
Middletown, PA • (25.7 miles) • Full Time • $25.00 to $38.00 / hr • 11/5/2026
We are seeking a skilled and dependable MEP Technician (Mechanical, Electrical & Plumbing) to support residential and commercial construction projects in the Middletown, Pennsylvania area. The ideal candidate will have at least four years of hands-on experience installing, maintaining, repairing, and troubleshooting mechanical, electrical, and/or plumbing systems. This position requires strong technical knowledge, the ability to interpret construction drawings and system schematics, and a commitment to safety, quality workmanship, and project efficiency. The MEP Technician will work on new construction, renovations, additions, and remodeling projects, both independently and alongside other skilled trades professionals. Candidates must reside within a 20-minute driving distance of MiddletowBW Elliott Mfg Co LLC
Binghamton, NY 13901 • (14 miles) • Full Time • $20.00 to $25.00 / hr • 11/1/2026
Machine Operator CentroMotion | Elliott Mfg. Binghamton, New York Welcome to CentroMotion, a global leader in manufacturing friction products, information and control devices, mechanical power transmission products, and thermal and motion controls. Our solutions are used in transportation, agriculture, construction, mining and industrial environments, and are designed to meet the unique needs of OEMs and aftermarket networks. At CentroMotion, we pride ourselves on deep subject matter expertise, long-term partnerships, and a drive for innovation and continuous improvement to help our customers achieve their goals. Our brands, including Carlisle Brake & Friction, Elliott Mfg., Gits Mfg., maximatecc, Power-Packer and Weasler Engineering, are recognized for their quality and reliability. JoinNesco Resource, LLC
Binghamton, NY 13901 • (14 miles) • Full Time • $20.00 / hr • 10/30/2026
Concrete Batch Operator Pay: $20.00 per hour Job Type: Full-time Schedule: Available shifts; 6am to 4:30pm and 9am to 6:00pm; overtime available Work Location: On-site in Binghamton, NY Nesco Resource is looking for dependable hard working individual for our client in Binghamton, NY, manufacturing high-quality precast concrete products. Our products are used in bridges, highways, and major infrastructure projects throughout New York and Pennsylvania. As a National Precast Concrete Association (NPCA) Certified Plant and an approved NYSDOT and PennDOT supplier, we take pride in our quality, craftsmanship, and commitment to excellence. We are looking for motivated, dependable individuals to join our team as Concrete Batch Plant System Technicians . No prior experience is required! We providePGS Worldwide
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $20.00 to $21.00 / hr • 10/30/2026
PGS Worldwide is seeking Machine Operators in Owego, New York for a one-year onsite contract-to-hire role supporting a leading aerospace & defense company. These positions will operate light-duty machining and production equipment while performing basic setups, adjustments, inspections, and quality checks. Machine Operators will work with close-tolerance components using prescribed gauges, jigs, and fixtures in a precision manufacturing environment. Required Skills 1–2 years of relevant manufacturing, machine operation, or production experience. Experience operating light-duty machine tools or production equipment. Basic computer skills. Strong attention to detail. Strong communication skills. Ability to follow established manufacturing and quality-control procedures. Ability to inspect woThe Salvation Army Syracuse ARC
Endicott, NY 13760 • (22.3 miles) • Part Time • $16.00 / hr • 11/9/2026
The Salvation Army's Adult Rehabilitation Centers make a difference in people's lives. Through the collection and resale of gently used goods, we are able to provide the financial support to assist men and women with a variety of social and spiritual afflictions. The in-residence rehabilitation program focuses on basic necessities with every man or woman being provided a clean and healthy living environment, good food, work therapy, leisure time activities, group and individual counseling, and spiritual direction. All our effort is focused on developing life skills and a personal relationship with God through Jesus Christ. More than just a job, each member of the team contributes to recycling goods that literally recycle and repair broken lives. Job Details: The Salvation Army Adult RehabiThe Raymond Hadley Corp
Spencer, NY 14883 • (43.9 miles) • Full Time • $17.00 to $22.00 / hr • 10/24/2026
Position Summary The goal of the Production Associate is to optimize employee and equipment effectiveness and efficiency, and to reduce waste and meet company objectives. Works under direct guidance of Team Lead. Supervisor Responsibilities: None Duties and Responsibilities: Understands and complies with company food safety program and regulatory requirements to ensure the safe production of food. Complies with company safety/environmental program and regulatory requirements. Demonstrates company values and vivid vision. Complete all tasks with honesty and integrity. Participates in preventing errors occurring in production. Maintaining a clean, organized and audit ready work station at all times. Ensures that production and food safety documents are accurate and completed. Completes timel
Aerotek
Middletown, PA • (25.7 miles) • Full Time • 11/13/2026
Now Hiring - Fabrication Machine Operator in Middletown, PA Shift: Monday-Friday; 7:00AM-3:30PM Pay: $18.50/hour Job Description In this role, you will play a key part in the production of military power supplies, including chassis and covers. You will be involved in finishing machined pieces by coating, painting, deburring, grinding, sanding, or anodizing them. As part of your responsibilities, you will also operate CNC water jets and brake presses, especially in a smaller production run environment. Responsibilities Finish machined pieces through processes such as coating, painting, deburring, grinding, sanding, or anodizing. Operate CNC water jet and brake press machines to cut out pieces. Primarily engage in painting (spraying and brushing), deburring, and grinding parts initially. TraCH Thompson Finishing
Binghamton, NY 13901 • (14 miles) • Full Time • $65,000 to $85,000 / yr • 11/14/2026
As a Quality Manager at CH Thompson, you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. You will lead a team of inspectors performing inspections, touch up, and unmasking, while simultaneously assisting these steps and completing initial and final inspections of products. You will work with our management team to ensure all parts meet the highest quality standards, drive continuous improvements, promote efficiencies and throughput and improve on time delivery and overall customer satisfaction. Position Overview Lead and manage a team of inspectors, ensuring they are on task, are following schedules and have the necessary tools and equipment to perform their job. Enforce company policies and procedures, addressing any performance or coAmphenol Aerospace
Endicott, NY • (20.9 miles) • Full Time • $24.00 to $26.00 / hr • 11/14/2026
The successful candidate will report to the Quality Manager and monitor the manufacturing and inspection processes within the facility. The Role Amphenol Military High Speed is seeking a Quality Inspector to work out of its state-of-the-art facility in Endicott, NY. This person will support quality functions including but not limited to: Inline Quality inspections, Data Collections, perform Quality Audits as required, rejection investigation and disposition, customer support, customer quality documentation, calibration maintenance. Monitor quality location inventories. The key responsibilities of this Quality Inspector include, but are not limited to: Monitoring of manufacturing/inspection processes for components, sub-assemblies, assemblies that are highly diversified and both mechanicalI3 Assembly
Binghamton, NY 13901 • (14 miles) • Full Time • $19.50 to $21.50 / hr • 11/5/2026
JOB SUMMARY/OBJECTIVE: The Production Expediter will assist in maintaining production schedules, deadlines, and quotas are met by ensuring the flow of materials, components, tooling, and paperwork among departments, and by taking action to identify and solve problems and fulfill rush orders. This position’s specific duties and responsibilities include, but are not limited to: Duties/Responsibilities: Communicates with departments, program managers and other stakeholders when shipping delays occur. Collects and analyzes data regarding efficiency and timeliness of production. Ensures compliance with applicable federal, state, and internal safety regulations and policies. Review and track all orders Work with the shipping/receiving Supervisor to ensure all shipments are delivered MaintainingHunt-EAS
Binghamton, NY 13901 • (14 miles) • Full Time • $75,000 to $125,000 / yr • 11/3/2026
About the Role This leadership role within our MEP team will drive the design and management of mechanical engineering projects, ensuring the successful execution of HVAC, plumbing, and fire protection systems across a variety of sectors. The Senior Mechanical Engineer will provide technical oversight, mentorship, and strategic guidance, working closely with clients, internal teams, and stakeholders to deliver high-quality, sustainable solutions. This position is open to the following office locations; please indicate which office you would prefer when filling out an application: Binghamton, NY Horseheads, NY Rochester, NY Towanda, PA Williamsport, PA Key Responsibilities Lead and manage mechanical engineering projects from concept through completion. Develop HVAC, plumbing, and fire proteTriple Cities Metal Finishing
Binghamton, NY 13904 • (9.2 miles) • Full Time • $20.00 to $26.00 / hr • 10/30/2026
Triple Cities Metal Finishing is currently seeking a Quality Process Control Technician to join our team. As a Quality Process Control Technician, you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach on the shop floor. Specifically, the role focuses on ensuring that manufacturing and finishing processes are performed correctly and to the highest standards. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for professional growth. About Us Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction,Donatech Corporation
Owego, NY 13827 • (30.6 miles) • Full Time • $83.00 to $93.00 / hr • 10/28/2026
Position would require the candidate to be a W2 employee of Donatech. US Citizenship Required. The engineer must have 10+ years of experience with required tools and will design, document, and test digital circuit cards. During the design phase they with develop specification documentation and capture the electrical schematics. Post design, they will work integration and develop design verification tests. They will work with the broader development team to deliver documentation, develop circuit card design data, and perform integration and test on the developed hardware. REQUIRED TOOLS: HyperLynx - Siemens Ansys HFSS Xpedition - Siemens 10+ yrs of experienceSterling Engineering Inc.
South Canaan, PA • (40.3 miles) • Full Time • 11/11/2026
Mechanical Engineer – Entry Level Welcome! Location: South Canaan, PA Pay: $30-$35/hr Type: Contract Assignment Benefits: Full benefits package including PTO, paid holidays, medical, dental, vision, 401(k), and ESOP eligibility through Sterling. Launch Your Engineering Career with Hands-On Product Development Looking for more than a desk job? This is an opportunity to join an innovative engineering team developing next-generation automation and packaging equipment used by manufacturers worldwide. Whether you're a recent Mechanical Engineering graduate or have a few years of experience, you'll work alongside experienced engineers on real-world product development projects-from concept and design through prototype testing and product launch. This assignment is supporting a growing engineerinFoth
Mehoopany, PA • (40.7 miles) • Full Time • 11/1/2026
Foth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 750 members across 33 locations are dedicated to solving our clients’ toughest science and engineering challenges . Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart and caring team, Foth may be the place for you. Join our team and experience the Foth difference that contributes to our impressive 92+% member retention rate ! Learn more at Foth is currently seeking a team-focused, innovative, and results-oriented Process Engineer who has a desire to contribute to our clients’ success and is lookiSystem One
Mehoopany, PA • (40.7 miles) • Full Time • 10/24/2026
Job Title : Mechanical Technician Location : Mehoopany, PA Work Model : Onsite Compensation : $30.00 – $42.80/hr Type : 6-month contract Responsibilities Prepare materials with splice tape and execute splices on specific unwinders on converter (AQL, CC-DL, CSL, TS, CUFF, BS). Prioritize and focus tasks based on skill set, including ordering material, moving carts, removing wrapping, preparing material (cutting, tape, disposing scrap), interfacing with HMI for returning/rejecting material, and organizing material carts. Thread up splice and execute splice sequence, and thread web during breakouts. Perform cleaning and low complexity maintenance tasks such as cleaning unwinders inside and outside, vacuuming and cleaning splice boxes, drive side, floors, glue tanks, and changing filters, prinThe AZEK Group LLC
Scranton, PA 18504 • (44.3 miles) • Full Time • 11/6/2026
**Currently offering a $1,500.00 Sign on Bonus** Pay Range: $18 per hour for Days and $19.00 for Nights POSITION SUMMARY Responsible for properly performing activities relative to assisting the extrusion operator in efficiently operating the extrusion equipment and producing quality products within a large, 24/7 manufacturing environment. Critical features of this job are described under the headings below. They may be subject to change at any time. ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) Contributes to accident-fICONMA, LLC
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $20.00 to $21.00 / hr • 10/30/2026
Our client, a Aerospace And Defense company, is looking for a Machine Operator for their Owego, NY location. Responsibilities: Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws. May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures. Requirements: Skills: Category Name Required Importance Experience Soft Skills attention to detail Yes 1 1 - 2 Years Soft Skills Communication Skills Yes 1 1 - 2 Years SoftwareLanceSoft Inc
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $20.00 to $21.00 / hr • 10/30/2026
Title : Machine Operator Location : Owego, NY Duration : 12 Months Pay Range : $15 - $21/hr on W2 Job Description: Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws. May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures.Nesco Resource, LLC
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $20.00 to $21.00 / hr • 10/30/2026
Description: Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws. May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures. Schedule: Second shift Monday-Thursday 3pm - 1:30am EST. Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco RePGS Worldwide
Owego, NY 13827 • (30.6 miles) • Full Time • $18.00 to $20.00 / hr • 11/18/2026
PGS Worldwide is seeking an Electronics Assembler in Owego, NY for a one-year onsite contract-to-hire role supporting a leading aerospace & defense company. This 2nd-shift position will perform production assembly work on electronic and mechanical assemblies and subassemblies. The assembler will work from drawings and diagrams, use hand and power tools, perform continuity checks, and support inspection, rework, and testing activities. Required Skills Bachelor’s degree with 0–3 years of relevant experience. Ability to read and work from diagrams, drawings, and assembly instructions. Ability to use hand and/or power tools in a production environment. Ability to perform repetitive and non-repetitive electronic or mechanical assembly tasks. Ability to perform continuity checks on work in proce
Aerotek
Middletown, PA • (25.7 miles) • Full Time • 11/7/2026
Job Title: Automation Machine Operator Job Description This role focuses on operating, setting up, and maintaining terminal block automation machinery to support high-quality, efficient production. You will ensure machines run smoothly, products meet quality standards, and production data is accurately documented while following all safety procedures. Responsibilities Set up and calibrate automated machines according to production specifications and work instructions. Monitor machine performance throughout the shift and adjust settings to maintain optimal operation and throughput. Inspect products regularly for quality, accuracy, and consistency during all stages of the production cycle. Troubleshoot mechanical, electrical, or software-related issues as they arise and resolve minor problemAmphenol Aerospace
Endicott, NY • (20.9 miles) • Full Time • $18.25 to $19.25 / hr • 11/13/2026
The Role Amphenol Military High Speed is seeking Assemblers to work out of its new facility in Endicott, NY . The key responsibilities of Assemblers include, but are not limited to: Prior experience working in a production manufacturing environment is required Experience in electronics assembly strongly preferred At least one year of soldering experience strongly preferred Basic AS-9100 knowledge preferred but not required J-STD-001 and IPC-A-610 certification are preferred but not required Flexibility to perform multiple functions within manufacturing facility including packaging, stockroom activities, cleaning, and general work center maintenance is required Basic computer skills required Pay: $18.25 - $19.25 per hour The Person The key skills and qualities of an Assembler at Amphenol AeCH Thompson Finishing
Binghamton, NY 13901 • (14 miles) • Full Time • $23.00 to $26.00 / hr • 11/5/2026
C.H. Thompson is currently seeking a detail-oriented and dependable Industrial Wet Painter to join our metal finishing team. This hands-on role is responsible for applying wet paint coatings to metal parts and components, ensuring a high-quality finish that meets customer and industry standards. The ideal candidate will have experience in industrial painting, a strong work ethic, and the ability to thrive in a fast-paced production environment. About Us: C.H. Thompson is a premier one-stop-shop for all of your finishing needs. Our continuous focus on improving quality and increasing productivity has made CH Thompson Finishing a leader in the industry. We offer several services including anodizing, painting, powder coating, intricate masking and silk screening, allowing us to provide multipHunt-EAS
Binghamton, NY 13901 • (14 miles) • Full Time • $55,000 to $75,000 / yr • 10/29/2026
About the Role This entry level Transportation Position will work with a professional engineer to design and detail plans (utilizing CADD) on a variety of projects, including Local, State and County highways and bridge rehabilitation/replacement projects. There will be opportunities to engage projects at all stages of design and construction including feasibility and preliminary design where design decisions and input are invaluable, roadway design, structural design, permitting, bidding, and construction administration. Our team offers a hardworking, dynamic environment, with a focus on balancing employee work-life balance and long-term individual growth. Opportunities for growth within our company are available based on performance, communication skills and teamwork capabilities. Key ResTriple Cities Metal Finishing
Binghamton, NY 13904 • (9.2 miles) • Full Time • $18.00 to $19.00 / hr • 10/27/2026
Triple Cities Metal Finishing is currently seeking a Powder Coater to join our 2nd shift team. As a Powder Coater, you will be responsible for applying high-quality powder coatings to a variety of metal parts and products, ensuring a durable and aesthetically pleasing finish. You will play a crucial role in our manufacturing process, contributing to the overall quality and appearance of our goods. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! Since 1945, TCMF has made innovative, as well as necessary changes in the way we coSystem One
Middletown, PA • (25.7 miles) • Full Time • 11/8/2026
NOW HIRING – NQA-1 Lead Auditors & Auditors System One is seeking experienced Nuclear Quality Assurance (NQA-1) Lead Auditors and Auditors to support the restart of a nuclear plant. Experience Experience performing nuclear quality assurance audits and possess working knowledge of: DOE O 414.1D ASME NQA-1 ASME Boiler & Pressure Vessel Code (BPVC) AWS D1.1 / D1.6 ISO 9001:2015 10 CFR 830 10 CFR Part 21 Position Details Start Date: August 2026. Duration: June of 2027 Per Diem: GSA Rate Per-Diem. No overtime Location: Middletown, Pennsylvania Lead Auditor Responsibilities Plan, lead, and perform nuclear quality assurance audits in accordance with DOE and regulatory requirements. Serve as Lead Auditor for internal and external audits, ensuring compliance with applicable QA programs and procedurNesco Resource, LLC
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $20.00 to $21.00 / hr • 10/30/2026
Description: Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws. May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures. Schedule: Second Weekend shift Thursday - Sunday 3pm - 1:30am EST. Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) servicesDonatech Corporation
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $16.00 to $21.00 / hr • 10/30/2026
Position would require the candidate to be a W2 employee of Donatech. US Citizenship Required. Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws. May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures.I3 Assembly
Binghamton, NY 13901 • (14 miles) • Full Time • $18 / yr • 10/28/2026
JOB SUMMARY/OBJECTIVE The Manufacturing Associate Assembly 1 is an entry-level production position responsible for the assembly, preparation, and inspection of cable assemblies and related electronic manufacturing products in a fast-paced manufacturing environment. This role performs routine production tasks following established work instructions, drawings, and quality standards while developing foundational manufacturing and assembly skills. The Manufacturing Associate Assembly 1 is expected to learn basic cable assembly processes, proper tool usage, manufacturing documentation, and quality requirements while supporting production schedules and company objectives. This position works under direct supervision and receives on-the-job training based on assigned manufacturing areas and produLanceSoft Inc
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $18.00 to $20.00 / hr • 11/18/2026
Description: Assembler - 2nd Shift Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools,. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions Custom Fields: Name: Security Clearance Comments Value: None Name: Security Clearance Value: None Name: Specialized atlas traininICONMA, LLC
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $18.00 to $20.00 / hr • 11/18/2026
Our client, an Aerospace and Defense company, is looking for multiple Assemblers for their Owego, NY location. Responsibilities: Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions Requirements: 1-2 years or more of exAmphenol Aerospace
Endicott, NY • (20.9 miles) • Full Time • $62,354 to $85,000 / yr • 11/13/2026
The Role Amphenol Military High Speed is seeking an Electrical Engineer to work out of its state-of-the-art facility in Endicott, NY . The key responsibilities of this Electrical Engineer include, but are not limited to: Develops product designs and/or test methods Performs or defines complex tests for evaluation of product, equipment or processes Works independently in planning and coordinating resources necessary to complete assignments May assist with creating major product presentations Reviews and analyzes a variety of data to determine requirements for meeting engineering objectives Interacts independently with customers, vendors, and Amphenol personnel on significant design, process or evaluation issues May direct other employees Coordinates and provides support to other departmentsCH Thompson Finishing
Binghamton, NY 13901 • (14 miles) • Full Time • $17.50 to $19.50 / hr • 10/30/2026
C.H. Thompson is currently seeking a detail-oriented and dependable Wet Paint & Powder Coat Apprentice to join our metal finishing team. This is a full-time, entry-level position designed to provide hands-on training and cross-functional experience in both liquid spray coating and electrostatic powder coating operations. The ideal candidate is a quick learner with a strong work ethic, a keen eye for detail, and a commitment to safety. Under the direct supervision of experienced painters and coaters, the apprentice will learn both trades to effectively float between wet paint and powder coating lines based on production schedules and business needs. About Us: C.H. Thompson is a premier one-stop-shop for all of your finishing needs. Our continuous focus on improving quality and increasing prNesco Resource, LLC
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $18.00 to $20.00 / hr • 10/30/2026
Description: Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws. May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures. Schedule: Weekend shift 5am - 3:30pm Thursday - Sunday Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco ResoTriple Cities Metal Finishing
Binghamton, NY 13904 • (9.2 miles) • Full Time • $17.00 to $20.50 / hr • 10/24/2026
Triple Cities Metal Finishing is currently seeking a motivated Plating Line Operator to join our team. As a Plating Line Operator you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, the role focuses on setting up, operating and tending to plating tanks. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certifie
Aerotek
Middletown, PA • (25.7 miles) • Full Time • 11/19/2026
Electronics Manufacturing Associate Location: Middletown, PA Pay Rate: $19.00 -21.25/hour Shift: 1st Shift | Monday - Friday | 7:00AM-7:00 AM Shift: 2nd Shift | Monday - Friday | 3:00 PM-11:30 PM Shift: 3rd Shift | Sunday-Thursday | 10:30 PM-7:00 AM Join a Leading Electronics Manufacturing Team As an Electronics Manufacturing Associate, you will play a key role in the production of electronic components and assemblies used in critical applications. Working in a clean, fast-paced manufacturing environment, you'll utilize hand tools, production equipment, and detailed assembly instructions to build products that meet strict quality standards. Whether your experience comes from manufacturing, assembly, machine operation, or a electrical knoweldge, we encourage you to apply. Key ResponsibilitiDonatech Corporation
Owego, NY 13827-3900 • (27.3 miles) • Full Time • $15.00 to $20.00 / hr • 11/18/2026
Position would require the candidate to be a W2 employee of Donatech. US Citizenship/Permanent Resident Required. Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools,. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditionsAmphenol Aerospace
Endicott, NY • (20.9 miles) • Full Time • $62,354 to $85,000 / yr • 11/4/2026
The Role - Amphenol Commercial Air is seeking a Manufacturing Engineer to work out of its new facility in Endicott, NY. The Manufacturing Engineer is responsible for the development, optimization, and troubleshooting of injection molding and the implementation/manufacturing of flexible busbars. This role will work closely with the Design Engineering Team on new product development for the manufacturability of prototype molds and busbars. The key responsibilities of the Manufacturing Engineer include, but are not limited to: Develop, validate, and document manufacturing processes for injection molding and flexible busbars for new and existing part numbers. Assist in the coordination of new tooling builds and lead the first article inspection and process qualification efforts. Facilitate theCH Thompson Finishing
Binghamton, NY 13901 • (14 miles) • Full Time • $18.00 to $21.00 / hr • 11/14/2026
C.H. Thompson is currently seeking a motivated Plating Line Operator to join our team. As a Plating Line Operator you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, the role focuses on setting up, operating and tending to plating tanks. About Us: C.H. Thompson is a premier one-stop-shop for all of your finishing needs. Our continuous focus on improving quality and increasing productivity has made CH Thompson Finishing a leader in the industry. We offer several services including anodizing, painting, powder coating, intricate masking and silk screening, allowing us to provide multiple finishes on individual parts. We service a multitude of industries including; aerospace, agricultural, automotive, computer, electronics, h
Aerotek
Middletown, PA • (25.7 miles) • Full Time • 11/18/2026
Job Title: Production Worker Job Description This role is a highly physical, hands-on position in a manufacturing environment where you support the production of cinder blocks and related materials. You will perform repetitive tasks on an assembly line, use hand tools to grind and shape products, and handle large quantities of materials while maintaining a strong focus on quality and safety. The position is ideal for someone who is reliable, comfortable with manual labor, and able to work efficiently in a loud, dirty, and open industrial setting. Responsibilities Lift and move cinder blocks and other materials weighing up to 50 pounds consistently throughout the shift. Work on an assembly line placing cinder blocks onto pallets in an efficient and organized manner. Hand grind tools and matTriple Cities Metal Finishing
Binghamton, NY 13904 • (9.2 miles) • Full Time • $16.50 to $18.50 / hr • 10/31/2026
Triple Cities Metal Finishing is currently seeking a motivated Manufacturing Associate to join our team in the Paint & Powder Coat Department. As a Manufacturing Associate, you will play a crucial role in maintaining quality, safety, and productivity through a hands-on approach. Specifically, this role focuses on preparing and racking metal parts, operating a forklift for material handling and shipping, inspecting finishes, and managing outgoing orders using our ERP system. About Us Triple Cities Metal Finishing provides a wide variety of surface finishing options to a multitude of industries including aerospace, agricultural, automotive, computer, electronics, household, industrial, medical, military, construction, and office parts. We are ISO 9001:2015, AS9100D & NADCAP Certified! SinceAmphenol Aerospace
Sidney, NY • (25.8 miles) • Full Time • $62,354 to $85,000 / yr • 11/13/2026
The Role - Amphenol Aerospace Operations is seeking a Manufacturing Quality Engineer (Plating) to work out of its state-of-the-art facility in Sidney, NY . The Manufacturing Quality Engineer (Plating) will analyze and discuss quality concerns with assigned manufacturing departments. The key responsibilities of the Manufacturing Quality Engineer (Plating) include, but are not limited to: Identify, prioritize, and address all significant and repetitious quality problems Initiate and verify the effectiveness of formal corrective actions Maintain thorough knowledge of ISO-9001, AS-9100, and Amphenol's quality manual, and subordinate procedures Enforce quality policies Maintain working knowledge of products and associated processes Conduct quality audits when appropriate and when assigned DevelAmphenol Aerospace
Sidney, NY • (25.8 miles) • Full Time • $62,354 to $85,000 / yr • 11/13/2026
The Role - Amphenol Aerospace Operations is seeking a Supplier Quality Engineer to work out of its state-of-the-art facility in Sidney, NY . The Supplier Quality Engineer will support quality engineering responsibilities relative to sub-tier suppliers. The primary focus of the role is to identify, resolve, and eliminate quality issues deriving from the supply base. The key responsibilities of the Supplier Quality Engineer include, but are not limited to: Supplier Quality Metrics: Scrap, NCMR's, SCAR's, & Scorecard Mgmt. Manage critical-to-business suppliers' quality performance metrics QIP (Quality Improvement Plans), ZDM (Zero Defect Mission), & QBR's (Quarterly Business Reviews) Develop and maintain strong working relationships with technical supplier counterparts Coordinate and overseeAmphenol Aerospace
Sidney, NY • (25.8 miles) • Full Time • $50,000 to $75,000 / yr • 10/28/2026
The Role - Amphenol Aerospace is seeking a Process Technician to work out its state-of-the-art facility in Sidney, NY. The Process Technician will support all products produced in the machining departments. This includes setup, start-up, operation and troubleshooting of conventional and CNC machines and post-machining operations.. The key responsibilities of the Process Technician include, but are not limited to: Daily Manufacturing floor support Creation of programs for new products Maintain DNC with proven, best practice programs. Provide training for Operators to run good quality parts. Support initiatives and training for corrective actions Quality and technical support to internal and external customers Continuous improvement and cost reduction activities Process troubleshooting to enAmphenol Aerospace
Sidney, NY • (25.8 miles) • Full Time • $62,354 to $85,000 / yr • 11/19/2026
The Role - Amphenol Aerospace Operations is seeking a Manufacturing Quality Engineer to work out of its state-of-the-art facility in Sidney, NY. The Manufacturing Quality Engineer will provide leadership and technical expertise to identify, resolve and eliminate quality issues and problems within assigned manufacturing departments. The key responsibilities of the Manufacturing Quality Engineer include, but are not limited to: Analyze, discuss, and present quality concerns with assigned manufacturing departments Identify, prioritize, and address all significant and repetitious quality problems Initiate and verify the effectiveness of formal corrective actions Maintain thorough knowledge of ISO-9001, AS-9100, and Amphenol’s Quality Manual, and subordinate procedures Enforce quality policiesAmphenol Aerospace
Sidney, NY • (25.8 miles) • Full Time • $62,354 to $75,000 / yr • 11/14/2026
The Role - Amphenol Aerospace Operations is seeking a Manufacturing Engineering Specialist to work out of its state-of-the-art facility in Sidney, NY . The Manufacturing Engineering Specialist manages the engineering and production document control system, including the release of new engineering documents, the definition of new part numbers, and the creation of the initial bills of material. Maintains the document follow-up system for customers and vendors. Reviews all ECNs at the initiation stage for accuracy. Responsible for planning quality controls including stop-works, part number compliance review, and assignment of part numbers to responsible departments. Leads the planning group with ECN documentation, compliance, and process. Responsible for new order part numbers and backlog of