Imperial, PA 15126 • (44.3 miles) • Full Time • 10/18/2026

We’re seeking a future team member for the role of Senior Vice President, Treasury and ALM to join our Corporate Treasury team. This role is located in Pittsburgh – Hybrid. In this role, you’ll make an impact in the following ways: Provides senior-level expertise and thought leadership in Asset Liability Management (ALM), with a primary focus on Interest Rate Risk in the Banking Book (IRRBB), balance sheet analytics, and Treasury risk management strategy. Leads the interpretation and evolution of modeling, forecasting, and scenario analysis related to assets, liabilities, earnings sensitivity, and economic value exposure to support balance sheet decisions and risk management. Identifies opportunities to enhance ALM and IRRBB analytics, including methodologies, assumptions

Youngstown, OH 44512 • (38.5 miles) • Full Time • 10/18/2026

Description Leidos is seeking a Senior Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Senior Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, an

Barberton, OH 44203 • (41.5 miles) • Full Time • 10/30/2026

Company Description Eurofins Scientific is a network of independent companies providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work to ensure the products they supply are safe, their ingredients are authentic, and labelling is accurate. Eurofins is dedicated to delivering testing services that contribute to the health and safety of society and the planet, and to its corporate responsibility to protect the environment and ensure diversity, equity, and inclusion across the entire network of Eurofins companies. With more than 20 U.S. locations, Eurofins Built Environment Testing

Uhrichsville, OH • (18.4 miles) • Full Time • 10/30/2026

NOW HIRING: FIELD TECHNICIAN Mancan is now hiring a Field Technician to join our team! We are looking for a dependable, hands-on individual who enjoys working with their hands and can tackle a variety of projects. The Field Technician will travel to job sites and assist with repairs, improvements, installations, and general property work. Job Responsibilities: Perform interior and exterior painting Complete trim work and finish work Assist with various installations Perform general repairs and maintenance Assist with construction and restoration projects Use hand and power tools safely and effectively Prepare and clean job sites Follow safety procedures and company guidelines Work independently or as part of a team Assist with other projects and duties as needed Ideal Candidate: Dependable

Dover, OH • (20.7 miles) • Full Time • 10/30/2026

This position will consult with management to determine how to meet project goals; manage and perform engineering tasks, calculations, and evaluations; prepare reports; perform feasibility studies; and develop engineering plans and specifications. It will provide an opportunity to work on projects focused on solid waste management, landfill cell and closure design, landfill expansion, solid waste facility design and operation support. There is opportunity to support site/civil design, stormwater management, natural resources restoration, water/wastewater evaluations/designs, site remediation, and other environmental and civil areas on interest. About us: Kimble Company is locally owned and operated by the Kimble Family, with over 70 years of experience in the energy, materials, recycling,

Darlington, PA 16115 • (36.1 miles) • Full Time • $30.00 to $38.00 / hr • 10/30/2026

Excellent oppurtunity for a Field Service Tech perefrably with a CDL A Drivers License in Darlinton, PA Direct Hire Opportunity $30 with no CDL-A, but we highly prefer to hire someone with a CDL-A. $32 - $34 per hour preferred range and potential for $34 - $36 per hour starting rate for exceptional candidates. Core Responsibilities: Create and sustain a safe working environment and culture within the company Communicate well with customers Must be able to work well in a team environment Ensure company property is well-maintained Desire to learn Skill Requirements: **Active Driver’s License ** Perform physical functions per job requirements Solution-oriented mindset Proficient with mechanical tools and equipment Beneficial Qualities: 2 years Field Service experience Hazardous Materials Endo

Akron, OH 44307 • (41.5 miles) • Part Time • $30.00 to $35.00 / hr • 10/30/2026

We’re seeking a Supplier Quality Engineer to assess supplier capabilities, evaluate manufacturing processes, and drive improvements that strengthen quality and production readiness. You’ll work directly with suppliers and internal cross-functional teams to identify risks, investigate root causes, and communicate clear, actionable findings. Key responsibilities Conduct supplier capacity audits and production capacity assessments. Audit manufacturing processes, including metal injection molding and related production operations. Evaluate production tooling, injection molding equipment, and other manufacturing equipment. Review quality systems, technical documentation, and inspection and measurement methods. Perform risk assessments and root-cause analysis; recommend and track corrective acti

Canton, OH • (21.5 miles) • Full Time • 10/30/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Senior Controls Engineer who will be part of a growing business to support the design, deployment, testing, and maintenance of control system projects. Responsibilities

Canton, OH 44709 • (23.9 miles) • Full Time • $45.00 to $52.00 / hr • 10/30/2026

Job Title: Manufacturing Cost Engineer Job Description We are seeking a skilled Manufacturing Cost Engineer to develop, analyze, and maintain detailed manufacturing cost estimates for new and existing products, processes, and projects. In this role, you support quoting, production planning, and cost-reduction initiatives by evaluating materials, labor, machining processes, equipment, routings, and manufacturing methods to ensure accurate pricing and profitable operations. Responsibilities Develop comprehensive manufacturing cost estimates for new and existing products, processes, and projects. Analyze materials, labor, machining processes, equipment, and manufacturing methods to determine accurate cost structures. Support the quoting process by preparing cost-based estimates that enable co

North Canton, OH 44720 • (28.6 miles) • Full Time • 10/30/2026

We are representing a multidisciplinary Construction Engineering firm spanning Civil, Architectural, Environmental, Surveying, and Field Services that is seeking a Project Engineer with Aviation project experience in OH. Bachelor's degree in Civil Engineering from an ABET-accredited university 3-5 years of relevant experience in land development, aviation, or related fields PE license preferred, or ability to obtain within a reasonable timeframe Proficiency in Autodesk Civil 3D and related design software; FAA design standards experience a plus Strong written and verbal communication skills and the ability to manage multiple projects

Tallmadge, OH 44278 • (40 miles) • Full Time • 10/30/2026

Join Our Team! Are you mechanically inclined, safety-focused, and interested in a hands-on career that offers variety and opportunities to travel? SD Myers is looking for a dependable and motivated EP Field Technician – Utility to join our Engineered Products & Maintenance team! In this role, you'll work with specialized equipment in high-voltage electrical substations, performing installations, maintenance, and repairs that help customers maintain safe and reliable electrical systems. You'll also support equipment preparation, maintenance, and improvement projects at our Tallmadge facility. As part of the Good Place Holdings family of companies, SD Myers is committed to putting people first, building meaningful relationships, and creating a workplace where employees can grow and thrive. W

Cuyahoga Falls, OH 44221 • (43.6 miles) • Full Time • $19.00 to $21.00 / hr • 10/29/2026

Title: Field Service Technician I Grade: 6 Position Summary & Key Areas of Responsibility: Position Summary: Are you a Field Technician? Field Engineer? Service Technician? Or do you want to start a career in this field? Are you tech savvy with a good mechanical aptitude and feel your skills are transferrable? Can you help us to provide best in class service? Do you want to work with some of the largest retail customers in the industry? NCR Voyix is looking for Field Service Technicians! Pay and Benefits: Hourly Pay Range: $19.00 to $20.83, depending on location and experience levels. Overtime available at time and a half. Benefits: 7 paid holidays and 6 paid floating holidays. Paid vacation – up to 80 hours your first year. 401K savings and retirement plan. Company provided business use o

Akron, OH • (41.3 miles) • Full Time • 10/29/2026

Who we are: Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive. We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment. Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mits

Youngstown, OH 44510 • (43.4 miles) • Full Time • 10/29/2026

Make an Impact With Us At Vallourec, we are seeking a Mechanical Engineer who will lead, coordinate, and execute major capital and maintenance projects across the mill while providing essential technical expertise to support safe, efficient, and reliable operations. Your Role at a Glance Organize, plan, coordinate, and monitor assigned mechanical engineering projects. Identify project phases, technical requirements, and resource needs. Manage major mechanical capital investment projects to ensure completion on time, within budget, and achieving ROI. Supervise contracted mechanical resources with strict adherence to safety procedures (toolbox talks, daily permits, continuous supervision). Lead and support mechanical maintenance projects to resolve issues across the mill. Maintain mechanical

Canton, OH 44702 • (21.4 miles) • Full Time • 10/28/2026

Curtain Wall / Faade Design Engineer - Canton, OH - JOB 26-00668 Salary Range: $86,000 - $120,000 Full-TimePermanent Position with Benefits A Canton, Ohio area manufactureisseekingto hire experienced Curtain Wall / Faade Design Engineer to create accurate 2D drawings, 3D models, and instructional diagrams for large-scale building facades using software such as Revit, AutoCAD, Rhino, Inventor, and Bluebeam. Responsibilities Detailing & Modeling: Develop detailed 2D shop drawings, 3D CAD/BIM models, and step-by-step assembly diagrams for complex building enclosure components using AutoCAD, Revit, Rhino, and Inventor. Manufacturing Support: Provide direct technical guidance to production supervisors and fabrication teams throughout the manufacturing process to resolve build issues and ensure

Massillon, OH 44646 • (26.7 miles) • Full Time • 10/28/2026

RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep®, Bronco® and off-road enthusiasts around the world. Real Truck’s 5,000+ associates operate from 72 facilities across four continents. ARE is the company behind all your favorite fiberglass, aluminum, and tonneau covers and truck caps. You can be a part of making an awesome product! POSITION SUMMARY The CNC Programmer will be responsible for programming CNC mills for creating fiberglass patterns and tools. This position will read blueprints and CAD files to understand the patterns being machined and program these patterns for 5-axis machining. This position will also create tool features such as flanges and mold bases for each pattern. This position is also responsible for the design and layout of

Hartville, OH 44632 • (28.9 miles) • Full Time • 10/28/2026

Role Manufacturing Engineer Location : Hartville, OH Job Type: Direct Hire The Manufacturing Engineer is responsible for driving operational excellence through process improvement, manufacturing support, safety leadership, environmental compliance, facilities management, and equipment reliability within a plastics manufacturing environment. This role serves as a key technical leader responsible for improving productivity, quality, safety, and cost performance while ensuring compliance with all regulatory requirements. The Manufacturing Engineer works closely with production, quality, maintenance, and leadership teams to support continuous improvement initiatives, capital projects, and sustainable plant operations. Required " Bachelor's degree in Manufacturing Engineering, Mechanical Engine

Akron, OH 44301 • (39.3 miles) • Full Time • 10/28/2026

About the role We are seeking a professional to join our production team to enhance cost clarity, boost operational effectiveness, and foster ongoing enhancements. In this position, you will work closely with the Operations, Production, Supply Chain, and Finance departments to evaluate production expenses, uncover savings opportunities, refine reporting precision, and aid strategic business choices through data-driven assessments. Responsibilities Evaluate production expenses, pinpoint discrepancies, and propose corrective measures. Identify and assist in cost-saving projects within production operations. Track production performance indicators, workforce efficiency, and material usage to elevate operational outcomes. Enhance inventory precision through regular cycle counts, physical stock

Akron, OH 44305 • (39.5 miles) • Full Time • $90,000 to $102,000 / yr • 10/28/2026

Structural Rigging Engineer (Construction) Direct Hire On Site - Akron, OH Travel to Site Required $90,000.00 - $102,000.00 Benefits include medical, dental, vision, accrued PTO, paid holidays and more Job Description The Structural Rigging Engineer is responsible for designing, analyzing, and evaluating rigging systems, new and existing structural systems, and crane loading used to lift and move heavy structures safely. Thisrequires a solid understanding of structural and mechanical engineering principles, load calculations, and industry regulations. The engineer collaborates with project teams to develop safe, efficient rigging plans and ensures compliance with safety standards. Design and develop rigging plans and lift studies for heavy lifting operations, including crane operations, ho

Youngstown, OH 44501 • (42.3 miles) • Full Time • 10/28/2026

Building Engineer Location: Youngstown, OH Onsite Flexibility: Onsite Contract Details Position Type: Contract Contract Duration: 3 months Pay Rate: $32.00 $33.00 / Hour (USD) Shift / Schedule: Rotating, day to night, 8 hr shifts, 5 on, 2 off Work Authorization: Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Job Summary As a Boiler Operator Building Engineer , you will be responsible for maintaining building systems including boiler systems, mechanical, plumbing, electrical, fire safety, and HVAC while ensuring compliance with safety codes, building regulations, and energy efficiency standards. The position is onsite at a large industrial facility and supports preventive maintenance, e

Akron, OH 44320 • (43.1 miles) • Full Time • 10/28/2026

Immediate need for a talented Assistant Portfolio Engineer . This is a 12+ Months Contract opportunity with long-term potential and is located in Akron, OH(Onsite) . Please review the job description below and contact me ASAP if you are interested. Job ID:26-28204 Pay Range: $40 - $43/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: Daily interface and coordination with planning portfolio engineers, client management and client sponsors to develop the long-range integrated portfolio plan based on existing projects and Planning strategies Ensure synergies across projects are incorporated into the portfolio of work Attend budget planning meetings with diffe

Akron, OH 44320 • (43.1 miles) • Full Time • $140,000 to $170,000 / yr • 10/28/2026

Transmission Engineer Akron, OH or St. Louis, MO or Columbus, OH Direct Hire MUST have: Experience with PLS-CADD PE license Our Transmission Line Engineers are expected to maintain a high attention to detail, possess working knowledge of Transmission Line design, demonstrate ownership of their work, drive for continual improvement, and collaborate effectively with their team and clients in order to make our clients successful. Major responsibilities of the Transmission Line Engineer will include: Design of high and extra-high voltage (69-500kV) transmission lines using PLS-CADD. Prepare construction documents, including plan and profile drawings, structure loading trees, and foundation assembly drawings. Prepare specifications and project design criteria. Provide field support during const

Tallmadge, OH 44278 • (40 miles) • Full Time • 10/28/2026

Senior Substation Electrical Engineer III Tallmadge, OH Engineered Products Department Full-Time | Exempt Join SDMyers – A Good Place Company At SDMyers , we help electric power system owners maximize the reliability, safety, and longevity of critical electrical infrastructure. As a Good Place Company , we believe business should create lasting valuenot only for our customers, but for our employees, communities, and the industries we serve. Our mission is to build thriving organizations by valuing people over profits, developing meaningful relationships, and delivering technical excellence that keeps the power on for businesses across North America. If you're a highly experienced electrical engineer with deep substation expertise and a passion for solving complex power system challenges, w

Canton, OH 44707 • (18.4 miles) • Full Time • $35,000 to $70,000 / yr • 10/28/2026

Company Overview: Abbott Electric, Inc. is a leading electrical contracting & design/build firm dedicated to delivering high-quality electrical solutions to commercial and industrial clients in the N.E. Ohio area. With a commitment to innovation, safety, and customer satisfaction, we are seeking a skilled Electrical Designer or CAD Design Drafter to join our team and contribute to our ongoing success. Position Overview: As an Electrical Designer or CAD Design Drafter at Abbott Electric, Inc., you will play a key role in the computer-aided drafting & design of electrical systems for various projects. Working closely with project managers, engineers, and clients, you will be responsible for creating detailed electrical plans, layouts, and specifications that adhere to industry standards and

Canton, OH 44702 • (21.4 miles) • Full Time • 10/28/2026

CNC HardTurning Lathe Programmer/Setup Specialist (Mazak/DMG Mori) Day in the life: You arrive, review the day’s build sheets and engineering prints, and translate them into Mazatrol or G/M code. You’ll set up a Mazak or DMG Mori lathe, verify tools and offsets, run firstarticle inspections, and then push complex hardturning jobs into steady, repeatable production. Throughout the shift, you’ll keep quality tight, document what you learned, and leave clean, accurate notes for the next machinist at changeover. What you’ll do Program, set up, and operate CNC lathes (Mazak and DMG Mori) for hardturning metal components using Mazatrol and/or G/M code, grounded in a strong understanding of GD&T. Preferred control familiarity: Mazatrol T, T32, Smart, Smooth X, and/or CELOS. Measure dimensions of

Akron, OH 44301 • (39.3 miles) • Full Time • 10/28/2026

Large Manufacturing Plant has a need for a Chemical Engineer. This is a direct hire role with a full benefits package Perform process optimization studies, plant trials, and technical evaluations of existing chemical manufacturing processes. Develop process design recommendations and engineering scope for process improvements and capital projects. Perform engineering assignments supporting larger capital, process improvement, and operational initiatives. Evaluate technical problems, select appropriate engineering methods, and develop practical design recommendations. Participate in Process Hazard Analyses (PHA) and other Process Safety activities associated with process changes and plant operations. Prepare engineering calculations, technical documentation, design information, and other pr

Akron, OH 44311 • (40.4 miles) • Full Time • 10/28/2026

Quanex is looking for a Sr. Product Regulatory & Compliance Engineer to join our team located in Owatonna, MN, Mounds View, MN, Sioux Falls, SD or Akron, OH. The Sr. Product Regulatory & Compliance Engineer is responsible for ensuring Quanex products comply with applicable regulatory, code, certification, and industry standards across North America and select global markets. This role serves as a technical liaison between internal engineering, product management, quality, manufacturing, and external regulatory bodies. A critical aspect of the position is active participation in industry associations and technical committees, representing Quanex’s technical interests and influencing evolving standards within the window and door industry. We Offer You! Competitive Salary Bonus Potential 401K

Triadelphia, WV • (44.2 miles) • Full Time • $20.00 to $35.00 / hr • 10/28/2026

Description As a Field Automation Technician , you’ll support our automated water transfer systems in the field. This technical, hands-on role involves installing and maintaining sensors, troubleshooting electronics, configuring devices, and ensuring safe and efficient operations at remote customer sites. You'll split time between field work and shop-based equipment repairs, reporting directly to the Manager of Automated Operations. This role is based out of our Triadelphia, WV Automation Shop. Responsibilities Set up and rig down automation equipment on site Perform diagnostics, repairs, and maintenance on sensors, valves, and controls Use hand tools, diagnostic gear, and software to configure and test systems Respond to field service calls and troubleshoot real-time issues Interact with

Canton, OH • (21.5 miles) • Full Time • 10/27/2026

This job is posted on behalf of LFP Associates by Top Echelon. STAFF ENGINEER - Akron/Canton, Ohio Area - ENTRY LEVEL TO 5 YEARS EXPERIENCE AND BS TECHNICAL Responsible for all types of engineering that takes place at Corporate and Plant level: ** Equipment design, development, purchase, and installation ** Product design and development ** Material selection and testing ** Tooling design, development, purchase, and installation ** Quality systems, development, and implement ** Problem solving ** Process develop and improvements ** Continuous Improvement

Canfield, OH 44406 • (34.2 miles) • Full Time • $90,000 to $130,000 / yr • 10/27/2026

A day in the life You begin your morning modeling a tie-rod assembly in SolidWorks for a new extrusion press upgrade. Before lunch, you review FEA outcomes to validate a container redesign. In the afternoon, you’re on a call with our field services crew, troubleshooting a hydraulic issue at a customer site, and then coordinating shop schedules to keep machinists and assemblers fully utilized. You wrap up by refining a quote for a billet loader retrofit. As Dunaway’s primary engineering point of contact, you will report directly to the President/Owner. You’ll independently tackle complex mechanical challenges while collaborating seamlessly with a tight-knit team. What you’ll do Design extrusion presses and related material handling equipment using 3D modeling tools. Reverse-engineer existin

Akron, OH • (41.3 miles) • Full Time • 10/27/2026

Kyntronics is at the forefront of linear actuation and motion control technology. We combine mechanical engineering, electronics, software, and hydraulic technology to develop innovative solutions for our customers' motion control challenges. Our Smart Hydraulic Actuator (SHA) technology delivers precise, reliable motion control for a wide range of industrial applications. We are looking for motivated, hands-on problem solvers who enjoy working with equipment, troubleshooting technical issues, and helping customers succeed. Position Summary The Mechatronics Test & Field Service Engineer is responsible for testing, troubleshooting, and supporting Kyntronics' servo-hydraulic actuator products. This hands-on role combines product testing and release, mechanical and electrical troubleshooting,

Akron, OH • (41.3 miles) • Full Time • 10/27/2026

Company Description With over $2B in revenue, 80+ manufacturing facilities across 6 continents and over 9,000 employees worldwide, Signode is a leading manufacturer of a broad spectrum of transit packaging consumables, tools, software, and equipment that optimize end-of-line packaging operations and protect products in transit. Signode brings this extensive product portfolio together under hundreds of trusted brands to offer complete transit packaging solutions to its customers. We produce strap, stretch and protective packaging. We also manufacture packaging tools and equipment used to apply the bulk packaging materials. These commercial packaging products are used to pack, bundle, unitize, protect, and secure goods during warehousing and transit. Our company is a pioneer in the industria

Youngstown, OH 44509 • (42.1 miles) • Full Time • 10/26/2026

Description: AccuForm Precision LLC, a CNC machine shop, is seeking an experienced CNC Programmer to join our engineering team. AccuForm is recognized for machining high-value, complex, multi-sided castings. The ideal candidate will possess strong experience in 4-axis and 5-axis CNC programming and be proficient in creating designs and applications using CAD software. Experience designing machining applications and CNC programs using CAM software is necessary. This role is crucial in ensuring operational efficiency, enhancing productivity, and contributing to the overall success of the company. AccuForm's culture is focused on teamwork and character where an employee's value is recognized and appreciated. Why AccuForm Precision? We have an exceptional, collaborative team! AccuForm values a

Canton, OH 44706 • (21.1 miles) • Full Time • 10/25/2026

Lead CNC Programmer Location: Canton, Ohio Company: Canton Drop Forge Schedule: Monday – Friday: 8:00 AM – 5:00 PM Canton Drop Forgeis a worldwide leader in Custom and Closed Die Forgings. Thanks to our over 100 years of prosperity as a company, we provide top benefits for our valued employees to prosper and reach their greatest potential. Becoming a member of Canton Drop Forge means joining a team that benefits from more than a century of learned knowledge and industry skills. AtCanton Drop Forge, you'll gain valuable experience in servicing our six major markets of expertise. We lead the way in closed die forging innovation for the aerospace, oilfield, power generation, mechanical power transmission, off-highway and railway industries. Position Overview: Canton Drop Forge is seeking an e

Akron, OH 44305 • (39.5 miles) • Full Time • $18.00 to $22.00 / hr • 10/25/2026

Description: Join the Environmental Design Group Team – Where People and Purpose Meet Title: Landscape Architecture Intern Salary Range: $18-$22 Location: Akron Employment Type: Temporary Work Arrangement: Hybrid Position Overview We are looking for a motivated and enthusiastic Civil Engineering Intern to join Environmental Design Group . This opportunity is designed to provide hands-on experience across any of our service lines , depending on your education, skills, and career goals. These service lines may include: Water Resources Transportation Construction Survey Requirements: Currently enrolled in a degree program in Civil Engineering or related field Proficiency in Microsoft Office; CAD preferred where applicable Valid driver's license and ability to be insured under company policy W

Akron, OH • (41.3 miles) • Full Time • 10/25/2026

Come work for OHM Advisors, the Community Advancement firm. With the singular mission of Advancing Communities , our diverse 800+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying, and construction engineering. We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem solving, design, and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward advancing the whole community today and well into the future. What You Will Contribute to OHM Advisors As a Graduate Civil Engineer, you will join a collaborative and growing team here you’ll gain

Uniontown, OH 44685 • (31.6 miles) • Full Time • 10/25/2026

Description: The Opportunity RETTEW is seeking an experienced Civil Engineer III – Land Development to take a lead technical role on development projects ranging from smaller redevelopment sites to complex, multidisciplinary developments. This is an opportunity for a civil engineer who is ready to take significant ownership of technical design, coordinate increasingly complex project work, mentor developing professionals, and become a trusted technical resource to Project Managers and clients. You'll work across commercial, industrial, residential, mixed-use, institutional, and other development projects, collaborating with engineers, Civil 3D designers, surveyors, environmental professionals, planners, and Project Managers to move projects from concept through permitting and construction.

Youngstown, OH 44507 • (41.1 miles) • Full Time • 10/25/2026

Looking to build your career with a company that values innovation , stability , and people ? Join our dedicated team as a Field Service Technician for our Youngstown, OH market. If you possess: Excellent customer service skills, superior organizational skills, and a self-starter mentality High level of technical ability Previous technical service and/or automotive service background preferred Since 1946, Hunter Engineering has been aligning cutting-edge technology with a strong commitment to quality. As a family-owned , American-made company, Hunter is the global leader in automotive service equipment, with our products used in over 130 countries by top vehicle manufacturers, tire companies, and service centers. We’re proud to have been recognized as a Best Places to Work finalist by the

Canton, OH • (21.5 miles) • Full Time • 10/24/2026

Job Posting Summary Chief Engineer Gameday Bay is seeking a hands-on Chief Engineer to lead maintenance and engineering for our year-round indoor waterpark. Reporting to the General Manager, you will combine technical expertise with team leadership to keep water attractions, building systems, food and beverage equipment, and towel laundry operating safely and reliably. This position is expected to start in January 2027 with anticipation of the indoor waterpark opening March 2027. Responsibilities May Include But Are Not Limited To: Direct daily engineering operations and enforce company policies, procedures, brand standards, manufacturer instructions, and applicable federal, state, and local laws, codes, permits, and regulatory requirements. Partner with the General Manager and Human Resou

Akron, OH 44301 • (39.3 miles) • Full Time • 10/24/2026

Zenlayer Inc. is looking for Internet Data Center (IDC) Engineers/Technicians to station at its data center located in Akron, Ohio.The job requires physical strength and shift flexibility to accommodate full IDC service coverage. Duties & Responsibilities: Strong working knowledge with servers and network hardware/components, copper and fiber infrastructure installations and testing, data center product support applications, software (Windows, Linux, SSH, RDP, Putty, etc.) configurations and data center infrastructure management (DCIM) related tools. Complete cabling and installation in server, router, switch according to work orders as well as MACs (Moves/Adds/Changes) orders in designated data centers, including devices receiving, labeling, racking, powering and network connection, confi

Alliance, OH 44601 • (23.6 miles) • Full Time • 10/24/2026

Automation Controls Engineer Position Summary: For more than 150 years, Morgan has been committed to offering world class solutions for the metals industry. At Morgan, we position our customers for success by collaborating with them to enhance safety, improve efficiency, and deliver value through the world’s most advanced material handling systemswhile building a better future for our employees and community. We are seeking a full-time Automation Controls Engineer to join our growing team in Alliance, Ohio. This role is essential in designing and developing advanced controls solutions for existing and new automated manufacturing cells, with a strong focus on heavy industrial environments. The successful candidate will champion the full lifecycle of controls design, development, commissioni