Please Accept our Privacy Policy
GoodwinRecruiting
Pittsburgh, PA 15205 • (40.7 miles) • Full Time • 11/16/2026
Structural Engineer - Pittsburgh, PA Join a growing, employee-focused engineering firm where collaboration, innovation, and professional development are at the core of everything we do. We are seeking a Senior Structural Engineer to support the design and development of structural projects from concept through construction. If you are passionate about structural design, enjoy solving complex engineering challenges, and thrive in a collaborative office environment, we encourage Structural Engineer Responsibilities Develop structural Revit models and construction drawing packages with minimal supervision Design and coordinate structural systems including steel, concrete, masonry, and wood framing Prepare foundation plans, framing plans, sections, details, and construction documents Review arilocatum
Washington, PA 15301 • (38.5 miles) • Full Time • 11/3/2026
Electrical Application Engineer, Industrial Gas Detection Washington, PA (Office plus about 10% travel) Be the technical expert between engineering, sales, and customers. You'll design and configure monitoring and sensor systems for mining, oil and gas, and power plants, then support them through commissioning. Must-Haves BS in Electrical or Electronics Engineering 5+ years of field, applications, or hands-on engineering Experience in oil and gas, mining, power generation , or heavy industrial settings Sensors, industrial monitoring, electronics, and network communications Modbus, 4 to 20 mA, and relay logic Hazardous location classifications and equipment ratings Clear technical writing Valid passport (or able to obtain) for occasional Canada and Mexico travel Able to lift 50 lbs What YouLeidos
Youngstown, OH 44512 • (41.5 miles) • Full Time • 11/16/2026
Description Leidos is seeking a Senior Transmission Line Engineer who will work as members of a dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The Senior Transmission Line Engineer will serve as key contributors on electric transmission line design projects for high-voltage overhead and underground systems for some of the largest utilities in the country. These employees will apply established NESC, ASCE, ACI, and other applicable standards in the engineering and design of electrical overhead and underground systems, voltage conversion projects, new capacity projects, and infrastructure replacement projects. Additionally, they will perform engineering analyses, prepare bidding documents, draft plans and specifications, anGeo-Technology Associates Inc.
Beaver Falls, PA • (36.2 miles) • Full Time • 11/22/2026
Geo-Technology Associates, Inc. (GTA ) is currently seeking full-time an experienced Senior Geotechnical Field Technician for our Beaver Falls, PA office. Qualified candidates must have prior construction inspection experience and relevant industry certifications. Relocation assistance is not available for this position. Pay Rate: $20-26/hr based on experience Senior Geotechnical Field Technician primary responsibilities include but are not limited to: Observe and document construction activities to assure compliance with technical specifications Monitor and test the moisture and density of soils using a nuclear density testing gauge Testing of concrete for slump, air content and unit weight Testing of asphalt for temperature and compaction Assist laboratory and drilling personnel as requeGeneral Dynamics Mission Systems, Inc
Canonsburg, PA 15317 • (39.7 miles) • Full Time • $145,000 to $165,000 / yr • 11/22/2026
Overview General Dynamics Mission Systems (GDMS) engineers a diverse portfolio of high technology solutions, products and services that enable customers to successfully execute missions across all domains of operation. With a global team of 12,000+ top professionals, we partner with the best in industry to expand the bounds of innovation in the defense and scientific arenas. Given the nature of our work and who we are, we value trust, honesty, alignment and transparency. We offer highly competitive benefits and pride ourselves in being a great place to work with a shared sense of purpose. You will also enjoy a flexible work environment where contributions are recognized and rewarded. If who we are and what we do resonates with you, we invite you to join our high-performance team! Equal OppEtech Hi
Zelienople, PA 16063 • (44.9 miles) • Full Time • $35.00 to $45.00 / hr • 11/22/2026
An outstanding, full-time opportunity has become available in Western Pennsylvania for an experienced Field Service Technician – CNC Machine Repair with 5+ years of hands-on CNC service and repair experience . This position offers competitive compensation, overtime, and benefits, including medical, disability, and life insurance. This position offers $35–$45/hour, plus overtime , and is responsible for providing hands-on CNC machine installation, maintenance, troubleshooting, and repair at customer facilities throughout Western Pennsylvania. The role involves approximately 100% regional travel , primarily day trips with occasional overnight stays. Company-provided tools, phone, and laptop are included. All candidates MUST have the following experience to qualify for consideration: 5+ yearsS&L Corporate Office
Canton, OH • (35.3 miles) • Full Time • 11/21/2026
Job Posting Summary - Chief Engineer Gameday Bay is seeking a hands-on Chief Engineer to lead maintenance and engineering for our year-round indoor waterpark. Reporting to the General Manager, you will combine technical expertise with team leadership to keep water attractions, building systems, food and beverage equipment, and towel laundry operating safely and reliably. This position is expected to start in January 2027 with anticipation of the indoor waterpark opening March 2027. Responsibilities May Include But Are Not Limited To: Direct daily engineering operations and enforce company policies, procedures, brand standards, manufacturer instructions, and applicable federal, state, and local laws, codes, permits, and regulatory requirements. Partner with the General Manager and Human ResIgnis Global Recruitment
Weirton, WV 26062 • (16.9 miles) • Full Time • 11/21/2026
Salary : Up to $155K base depending on experience and location, plus an annual performance-based bonus Location : Fully remote, anywhere in the US near a major airport The consultancy • Fire protection and life safety consulting engineering firm • Growing its process safety team, with food manufacturing a big sector for the firm • Salaried roles with flexible schedules, and project coordinators who book your travel and handle expenses The role • Leading and performing combustible dust hazard analyses (DHAs) • Fire and explosion protection work alongside the DHAs • No business development or winning work. Your client contact comes through managing your projects. Technical scope • Combustible dust hazard analyses to NFPA 652, 654, 660, 61, 484 and 664 • Explosion protection: venting, suppresMorgan Engineering Systems Inc
Alliance, OH 44601 • (34.6 miles) • Full Time • 11/21/2026
Automation Controls Engineer Position Summary: For more than 150 years, Morgan has been committed to offering world class solutions for the metals industry. At Morgan, we position our customers for success by collaborating with them to enhance safety, improve efficiency, and deliver value through the world’s most advanced material handling systems-while building a better future for our employees and community. We are seeking a full-time Automation Controls Engineer to join our growing team in Alliance, Ohio. This role is essential in designing and developing advanced controls solutions for existing and new automated manufacturing cells, with a strong focus on heavy industrial environments. The successful candidate will champion the full lifecycle of controls design, development, commissionCanton Drop Forge, Inc.
Canton, OH 44706 • (35 miles) • Full Time • 11/21/2026
Manufacturing Engineer Location: Canton, Ohio - Onsite Company: Canton Drop Forge, Inc. Schedule: Monday – Friday; 7:00 AM – 4:00 PM Canton Drop Forge is a worldwide leader in Custom and Closed Die Forgings. Thanks to our over 100 years of prosperity as a company, we provide top benefits for our valued employees to prosper and reach their greatest potential. Becoming a member of Canton Drop Forge means joining a team that benefits from more than a century of learned knowledge and industry skills. At Canton Drop Forge , you'll gain valuable experience in servicing our six major markets of expertise. We lead the way in closed die forging innovation for the aerospace, oilfield, power generation, mechanical power transmission, off-highway and railway industries. Position Overview: The ManufactClean Harbors
Carnegie, PA 15106 • (40.7 miles) • Full Time • $20.00 to $23.00 / hr • 11/21/2026
EnviroServe, a Clean Harbors Company, in Carnegie, PA is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? Health and Safety is our #1 priority and we liveWindow World Of Penn/Ohio
Youngstown, OH 44512 • (40.9 miles) • Full Time • 11/21/2026
Benefits: Health insurance 401(k) matching Company car Paid time off Vision insurance Dental insurance Ready for a steady W-2 role with a company truck, great benefits, and a schedule that respects your time? If you have hands-on experience installing or servicing windows and doors but are tired of chaotic schedules, constant wear and tear on your personal vehicle, or chasing gig work, it’s time to look at Window World. As part of the Moran family’s network of locations, we offer a stable, supportive family culture where you aren't just a number-you are the face of our commitment to quality. We provide a company field vehicle with a gas card, a company phone, and a consistent Monday through Friday schedule so you can protect your work-life balance. You provide the diagnostic skill, the craBrayman Construction
Pittsburgh, PA 15233 • (44.5 miles) • Full Time • 11/21/2026
Build a Career in Heavy Civil Construction - No Engineering Degree Required Brayman Construction Corporation is seeking motivated Field Construction Technicians to support our heavy civil and specialty geotechnical project teams. This is a field-based role for someone who enjoys construction, working outdoors, solving problems, and learning how complex projects are built. An engineering degree is not required. You'll work directly with Superintendents, Project Managers, and field crews to help track production, maintain project records, support quality, and promote safe work practices. What You'll Do Observe and document daily construction activities Track labor, equipment, materials, quantities, and production Prepare daily reports, progress photos, and field documentation Measure completEastlake Search Consultants
Alliance, OH • (33.9 miles) • Full Time • 11/21/2026
An established manufacturer in the transportation equipment industry is looking for a Product Design Engineer to support the design and development of liquid tank trailers and related components. This role offers the opportunity to work on complex engineering projects from initial design through production, collaborating with teams across engineering, sales, purchasing, and manufacturing. The ideal candidate has a strong mechanical design background, enjoys solving technical challenges, and understands how to turn customer requirements into practical, manufacturable designs. What You’ll Do Design and develop liquid tank trailers, components, and related assemblies. Review customer specifications, drawings, and project requirements to determine design needs. Perform engineering calculationsStolle Machinery Company
North Canton, OH 44720 • (42.3 miles) • Full Time • 11/21/2026
JOB SUMMARY: Develop programs to control machining or processing of metal parts by automatic machine tools, equipment, or systems. PRINCIPLE ACCOUNTABILITIES include: • Determine the sequence of machine operations and select the proper cutting tools needed to machine work pieces into the desired shapes. • Revise programs or tapes to eliminate errors, and retest programs to check that problems have been solved. • Analyze job orders, drawings, blueprints, specifications and design data to calculate dimensions, tool selection, machine speeds, and feed rates. • Determine reference points, machine cutting paths or hole locationsand compute angular and linear dimensions, radii, and curvatures. • Observe machines on trial runs or conduct computer simulations to ensure that programs and machineryIntegrity Jobs
Canton, OH 44705 • (35.3 miles) • Full Time • $25.00 to $35.00 / hr • 11/21/2026
Ready to turn complex prints into perfect parts? Do you enjoy programming elegant toolpaths and then proving them out on multi-axis equipment? Are Fanuc, Mazak, Haas, and Okuma controls part of your daily toolkit? If so, step into our Canton, OH shop as a Precision CNC Programmer-Operator and help us raise the bar on quality and throughput. Role highlights Own setups and production on CNC mills (3–4 axis and 5+ axis VMC) and CNC lathes (2–4 axis and 5+ axis). Create and optimize programs in Mastercam, Esprit, HSM Works, and GibbsCAM; leverage Autodesk Fusion 360, Mazatrol, and Sprutcam when appropriate. Translate engineering drawings/blueprints into efficient, reliable machining strategies. Troubleshoot offsets, tooling, workholding, and control parameters to keep parts in spec. Inspect usRobin Industries, Inc
North Canton, OH 44720 • (42.3 miles) • Full Time • 11/21/2026
REPORT TO: Technical Director PURPOSE The Mechanical Engineer - Project is responsible for leading Continuous Improvement and Six Sigma projects across production divisions. This role owns project delivery and sustained results, supports new-equipment installation and commissioning, evaluates emerging technologies, and trains divisional personnel on equipment operation, maintenance, and optimization. ESSENTIAL FUNCTIONS Deploy to production divisions to lead and execute on-site Continuous Improvement and Six Sigma projects. Maintain accountability for project closure on time and within scope, with controls to sustain results. Oversee successful installation, commissioning, validation, and production handoff of new equipment. Investigate new technologies and submit well-researched, viable pA-Line
Zelienople, PA 16063 • (44.9 miles) • Full Time • $22.00 to $24.00 / hr • 11/21/2026
Depot Service Technician Location: Zelienople, PA 16063 Pay Rate: $22.00–$24.00 per hour Schedule: Monday–Friday, 7:00 AM–3:30 PM Position Type: On-site Position Overview The Depot Service Technician is responsible for troubleshooting, disassembling, testing, repairing, and assembling electromechanical medical devices returned for service. This position requires hands-on mechanical and electrical troubleshooting skills, strong data entry abilities, and the ability to prepare accurate technical reports. The technician will follow established procedures, work instructions, engineering drawings, and sketches while documenting all service activities in the approved Service Management System. The ideal candidate is detail-oriented, technically capable, and comfortable working independently in aContinuous Composites Inc
Youngstown, OH 44513 • (40.8 miles) • Full Time • 11/20/2026
Principal Materials Engineer, High-Temp Composites About Continuous Composites: At Continuous Composites Inc., we are redefining what is possible in advanced manufacturing. Our unique CF3D® technology for composite 3D printing opens new frontiers in Aerospace and Defense. We thrive on innovation, rapid iteration, and empowering every team member to take initiative and drive breakthrough solutions. Our mission is to transform industrial manufacturing through pioneering research, creative problem-solving, and relentless execution. Position Summary: The Continuous Composite Engineering Team is seeking a Principal Materials Engineer to support in-house efforts to develop High Temperature Composites for real world applications. In this role, you will lead the Materials Team to develop and definNicholson Construction Company
Canonsburg, PA 15317 • (39.7 miles) • Full Time • 11/20/2026
Description: Since 1955, Nicholson Construction Company has been setting the industry standard for performance and technical innovation in geotechnical construction. We have built our reputation by performing the highest quality work and providing the most innovative solutions on the widest range of demanding and high-profile projects. Nicholson is part of a global network of unparalleled geotechnical resources and expertise, specializing in deep foundations, earth retention, ground treatment and ground improvement. Summary: Provides technical, quality control and administrative support to Superintendents, Project Engineers and Project Managers on job sites. This is a temporary, full time position located at our jobsite near Plant Bowen, GA. Essential Functions: Sample Collection & TestingOne X
Chester, WV 26034 • (19.7 miles) • Full Time • 11/20/2026
Description: General Scope: We are seeking a dedicated and skilled Field Service Technician to join our team. This role involves working at various field locations to ensure the proper installation, maintenance, and repair of equipment, while also assisting with shop operations at our new facility as needed. The ideal candidate will possess strong mechanical knowledge, the ability to troubleshoot complex systems, and a willingness to support both field and shop activities in a fast-paced environment. Requirements: Key Expectations: Perform installation, maintenance, and repair of equipment on frac locations. Operate forklifts and telehandlers safely while adhering to OSHA regulations. Troubleshoot mechanical issues and provide effective solutions. Conduct routine inspections of equipment tPennsylvania Transformer Technology LLC
Canonsburg, PA 15317-1786 • (38.8 miles) • Part Time • 11/20/2026
Description: POSITION TITLE : Power Transformer Technician (FST) EFFECTIVE DATE: August 2024 , REPORTS TO: Field Service Manager DEPARTMENT: Field Service LOCATION : Remote STATUS : Non-Exempt Position Description Summary The PT Field Technician specializing in power transformers. The successful candidate will work in a crew setting installation, maintenance, troubleshooting, and repair of power transformers at various customer sites. This role requires extensive travel and a commitment to delivering exceptional technical support and customer service. Essential Functions · Installation and Commissioning: Install and commission power transformers, ensuring they meet operational specifications and safety standards. · Maintenance and Testing: Perform routine maintenance, testing, and inspectiEchoStar
Cadiz, OH • (14.5 miles) • Full Time • $21.25 / hr • 11/19/2026
What Success Looks Like (Objectives): What You’ll Do: You’ll visit customers’ homes, solve problems, and introduce them to smart home tech. Install and service DISH, Starlink and smart home solutions in customers’ homes Teach customers how to use their tech and offer additional services when helpful Keep a clean work area and maintain a professional attitude while working independently but staying connected with the team What’s in it for You: Career Growth: Start here and grow fast! Many of our leaders began in this role, with opportunities to move into different departments for new challenges Pay Increases: Automatic promotion after 6 months with a $1/hour raise. Additional promotions with 5–10% pay increases based on performance Bonus Potential: Earn up to $6,400 your first year, and upTop Echelon Software
Canton, OH • (35.3 miles) • Full Time • 11/19/2026
This job is posted on behalf of Top Echelon Software by Top Echelon. Senior PHP Engineer – CATS Platform & AI Features Top Echelon Software is seeking a Senior PHP Engineer to help own and evolve CATS, our established SaaS applicant tracking system running in AWS. This is a hands-on role combining production ownership, thoughtful modernization, and practical AI development. You’ll maintain a product customers depend on, improve how we build and deliver software, and develop AI-enabled features that help recruiters work more effectively. This is a full-time role based in Canton, OH. U.S. work authorization required. About the role CATS is a mature, revenue-generating product with an established customer base and a substantial codebase. We’re looking for an engineer who enjoys understandingUniversal Stainless
North Jackson, OH 44451 • (43.3 miles) • Full Time • $90,000 to $110,000 / yr • 11/19/2026
JOIN OUR TEAM TODAY Universal Stainless & Alloy Products, Inc., established in 1994, is headquartered in Bridgeville, PA, with plants in North Jackson, OH, Dunkirk, NY, and Titusville, PA. Universal Stainless produces semi-finished and finished specialty steel long products and plate including stainless steel, tool steel, bearing steel, gear steel, and aircraft quality low alloy steels for use in a variety of industries. Universal is committed to providing the best quality, delivery, and service possible. The Site Reliability Maintenance Engineer is a key player in Universal Stainless’ newly created Reliability Program. This position is responsible for identifying and managing reliability improvements to steel-producing equipment and facilities, minimizing downtime, and supporting operatioKimble
Dover, OH • (32 miles) • Full Time • 11/18/2026
The Mining Engineer is responsible for: directing engineering activities in surface mining, construction projects, site environmental compliance, permitting activities and other areas as needed; provide reserve evaluations, planning, cut and fill direction and project expansion studies; provide short- and long-range plans, design and equipment utilization. The requirements listed below constitutes the minimum tasks necessary to perform this position and are considered essential job duties. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Engineering Develop and maintain 3D Geologic Models of assigned permits using planning software Coordinate mine surveying and other Engineering activity Development of surface mine plans and refinePrecoat Metals
Weirton, WV 26062 • (16.9 miles) • Full Time • 11/17/2026
Company Description Since 1961, Precoat Metals ( has been setting the standards in the coil coatings industry worldwide. We are committed to this level of quality in both our product line and customer service, and focus our resources on investigating and implementing new coil coating technologies, developing unique coatings, ink and film systems, and designing multifaceted prints while reducing the cycle time to market. We are able to achieve this "culture of excellence" thru the hard work and talent of the people on our team. Job Description JOB LOCATION: Job is listed in St. Louis MO where our headquarters is located. However, applicants residing in or near Houston TX, Portage IN, La Porte IN, Birmingham AL, Columbia SC or Weirton WV would also be acceptable as we have plants located inEG Professional
Canton, OH • (35.3 miles) • Full Time • 11/17/2026
QUALITY ENGINEERING MANAGER OVERVIEW: Are you passionate about quality and excellence? Join our dynamic team as a Quality Manager, where you'll play a pivotal role in ensuring our Quality Management System (QMS) meets the highest standards. You'll have the opportunity to work with automotive technologies, lead a dedicated team, and make a significant impact on our products and services. If you're driven by continuous improvement and thrive in a collaborative environment, this is the perfect role for you! KEY RESPONSIBILITIES: Apply updates to industry standards. Implement changes to maintain AS9100, ISO9000, IATF 16949, and OEM standards. Manage internal audits to meet industry and customer requirements. Develop and oversee inspection standards and procedures, ensuring compliance with FAR,Fresh Mark, Inc.
Massillon, OH 44646 • (40.7 miles) • Full Time • 11/17/2026
Fresh Mark, based in Northeast Ohio, is looking for an Associate Plant Engineer to join our Massillon facility. Candidates should have demonstrated hands-on project manager delivering project scope from concept to closure on-time and on-budget, scheduling work to promote maximum amount completed with minimal plant downtime, resulting in higher plant efficiency. Position Summary The Associate Plant Engineer supports engineering, capital improvement, equipment installation, and process optimization projects within the manufacturing facility. This position is designed for an early-career engineer who will develop practical plant engineering and project management capability while working closely with experienced engineers, Operations, Maintenance Technical Services, EHS, FSQA, contractors, anDearing Compressor
Youngstown, OH 44512 • (40.9 miles) • Full Time • 11/17/2026
At Dearing Compressor & Pump, our people power everything we do. They’re not just employees, they’re the heartbeat of our success and the driving force behind our progress. That’s why we treat every team member like family. With a strong, collaborative culture, and a true people-first approach, Dearing isn’t just a place to work, it’s a place to grow, make an impact, and thrive. POSITION SUMMARY Performs all aspects of Application Engineering work to support the submittal of client proposals. Works directly with customers, vendors and Dearing sales, engineering and manufacturing personnel. The Applications Engineer will participate in sizing, estimating and generating proposals for natural gas compressor packages and related components for the oil and gas industry, primarily the domestic sRust Belt Recruiting
Canton, OH 44701 • (35.4 miles) • Full Time • 11/16/2026
Quality Engineer Shift: First Shift (on-site) Salary: $73,000 - $100,000 per year Who we are We are a premier regional manufacturer serving critical infrastructure and transportation markets across North America. We are seeking a dedicated professional to join our engineering team to lead continuous product compliance, root cause analysis, and quality assurance. Quality Engineer Role The Quality Engineer serves as the primary technical owner for product quality, regulatory compliance, and state agency certification processes. This position exists to ensure manufactured products successfully navigate regulatory approvals, meet stringent specifications, and maintain high standards of quality through sustained production. Quality Engineer Responsibilities Lead product approval and certificatiINTERMOUNTAIN ELECTRONICS INC
Pittsburgh, PA 15231 • (36.5 miles) • Full Time • 11/16/2026
Description: Intermountain Electronics (IE) delivers dependable and effective critical power and process infrastructure and mission critical systems to virtually every industrial sector in North America. We provide custom-engineered, packaged equipment to industrial markets. We specialize in designing, manufacturing, automating and testing power distribution equipment for OEM, mission critical, oil and gas and mining industries. Reporting directly to the National Service Manager, we are currently seeking a Remote - Field Service Technician (Electrical) for our Eastern Region and based remotely in Pittsburgh, Pennsylvania. Why you will love working at IE: You will love the challenge, interesting and varied work, and endless opportunities, but most importantly you will love working with a teTarkett
Bridgeville, PA • (41.3 miles) • Full Time • 11/15/2026
Want to be a Champion? Come join our team at Tarkett Sports. Tarkett Sports is the leader in Sport Surfacing throughout North America. We are expanding and looking for Turf Service Technicians to join our team. We are currently recruiting for the Chattanooga, TN region, including North West Georgia and North East Alabama About the Job: Traveling to customer locations in order to address maintenance service and repair needs to turf fields. Diagnose field problems and relay the information to the Customer Service and Field Service coordinators, who will contact the customer. Expedite customer problems and complaints to the CSR and team within 24 hours in order to maximize satisfaction. Goal to address repairs within 7 days of notification Ability to troubleshoot and repair various issues thaBlack Diamond
Pittsburgh, PA 15225 • (40.6 miles) • Full Time • 11/14/2026
About the Role: The Field Service Technician plays a critical role in ensuring the optimal performance and reliability of rental and leasing equipment by providing expert on-site technical support and maintenance. This position involves diagnosing, troubleshooting, and repairing a wide range of mechanical, electrical, and electronic systems, including compressors, fire alarm systems, and fiber optic components. The technician will perform preventive maintenance to minimize equipment downtime and extend the lifecycle of assets, directly impacting customer satisfaction and operational efficiency. Working independently in diverse environments, the technician must adapt to various technical challenges and deliver timely solutions. Ultimately, this role is essential for maintaining the safety,Atlantic Emergency Solutions
New Philadelphia, OH • (29.5 miles) • Part Time • 11/14/2026
Description: Urgently Hiring- apply now for more information and to schedule an interview! At Atlantic Emergency Solutions, our technicians support the equipment that firefighters and emergency responders rely on every day. You get the opportunity to work independently in the field, build strong customer relationships, and service specialized life-saving equipment including SCBA (Scott Air Packs), compressors, and rescue tools. We are committed to providing meaningful work, flexibility, and a supportive team environment while maintaining high standards of safety and performance. Schedule: Part-Time : Flexible daytime schedule based on service needs Occasional travel within the service territory Work Environment: New Philadelphia, OH Mobile, field-based role supporting fire departments andKANAWHA SCALES & SYSTEMS LLC
Valley Grove, WV 26060 • (29.9 miles) • Full Time • $24.00 to $28.00 / hr • 11/14/2026
Description: Kanawha Scales & Systems (KSS) is a leader in industrial weighing, measurement, and automation solutions, supporting customers across manufacturing, mining, utilities, logistics, aerospace, defense, and energy. For decades, we’ve built our reputation on technical expertise, reliable service, and a simple philosophy: take care of our customers and take care of our people . At KSS, our people are what set us apart. We offer competitive pay, strong benefits, and ongoing training to support long-term growth. As we continue to expand, we provide real opportunities for employees to develop their skills, advance their careers, and make an impact. We are seeking a skilled Scale Service Technician w/CDL for our Wheeling, WV Team to ensure the accurate and reliable operation of a varietOhio Gratings, Inc
Canton, OH 44706 • (35 miles) • Full Time • 11/14/2026
The Specialty Products Sales Engineer at Ohio Gratings, Inc. plays a crucial role in driving the success of our Specialty Products division. This position combines sales expertise with engineering acumen to provide exceptional service to our customers. The primary responsibilities include generating quotes, managing orders, negotiating sales, and value engineering projects. Additionally, the role involves estimating projects, performing material take-offs from plans & specifications or customer drawings, and identifying bid scopes. The Sales Engineer will assess project complexity, determine the best course of action, and communicate effectively with customers and internal departments, all while upholding the Ohio Gratings values of integrity, teamwork, and innovation. At Ohio Gratings, InSolaris Oilfield Infrastructure, LLC
Barnesville, OH 43713 • (35.7 miles) • Full Time • 11/14/2026
Company Description About Solaris Energy Infrastructure Solaris Energy Infrastructure, Inc. (NYSE:SEI) delivers comprehensive power infrastructure solutions including generation, distribution, installation and commissioning, aftermarket support, and operations and maintenance. Headquartered in Houston, Texas, the Company serves multiple U.S. end markets, including data centers, energy, and other commercial and industrial sectors. Job Description About the Opportunity The Field Service Technician is directly responsible for providing service and customer support for Solaris products and equipment deployed to oil and gas locations in the United States. Responsible for the daily service delivery and serve as the customer’s primary point of contact in the field. Requires daily travel to customPrequel Solutions
Canton, OH • (35.3 miles) • Full Time • 11/14/2026
Substation Engineer Lead – Canton, OH We're partnering with a large, well-established industrial manufacturer in Northeast Ohio to hire a Substation Engineer Lead supporting critical medium-voltage power distribution infrastructure across a major manufacturing operation. This is a hands-on technical/project leadership role - not a people-management position. It's a strong opportunity for an experienced substation or power systems professional who wants challenging technical work without the travel often associated with this field. What You'll Do Support and troubleshoot medium-voltage power distribution and substations Work with transformers, switchgear, breakers and protective relays Lead electrical infrastructure upgrades and modernization projects Support system reliability, preventiveWieland
Alliance, OH 44601 • (34.6 miles) • Full Time • $102,000 to $110,000 / yr • 11/13/2026
Overview Wieland - Creating Value for Generations! Wieland is a global leader in copper and copper alloy manufacturing, processing, and distribution. We provide a large product and service portfolio including power, automotive, ammunition, coinage, construction materials, refrigeration, electronics and many other industries. To us, metal is more than material. Wieland's Cultural Values Wieland’s culture is what makes for a fun and rewarding place to work! As a company, we benefit daily from our employees' knowledge and abilities. With our cultural vision, we place our core values at the heart of everything we do: safety , ambition , optimism , reliability , ownership , diversity , & respect . Wieland is hiring a Product Engineer. The Product Engineer is responsible for leading the technicaSecuritas Technology Corporation
Pittsburgh, PA 15205 • (40.8 miles) • Full Time • $30.00 to $38.00 / hr • 11/12/2026
Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. STC is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on STC products at customer sites. The position provides customer contact for all post-instaStolle Machinery Company - USA
North Canton, OH 44720 • (42.3 miles) • Full Time • 11/12/2026
JOB SUMMARY The Mechanical Engineer’s primary function is to provide complete engineering packages required to manufacture and assemble automated machinery, die sets and related press , flexibility, and efficiency are extremely important. PRINCIPLE ACCOUNTABILITIES include the following: The individual must possess strong communication skills, efficient work habits and be self-motivated to succeed in an environment where engineering cost and schedules must be minimized for the company to be successful. Design of automated machinery and/or tooling. Produce complete assembly and detail drawings. Review/Check engineering work for completeness and accuracy. Communicate effectively with supervisors and peers. Maintain project related documents, records, and files. Represent the company to custoTechnical Talent Group
Weirton, WV 26062 • (16.9 miles) • Full Time • $100.00 to $150.00 / hr • 11/12/2026
Embedded Software Engineer (Linux) Location: West Virginia (100% On-Site) Employment Type: 6-Month Contract-to-Hire Openings: 2 Schedule: Monday–Friday | 8:00 AM–5:00 PM Relocation Assistance: Available, subject to approval About the Opportunity We are seeking two Embedded Software Engineers to join a rapidly growing energy storage manufacturer in West Virginia. This is an exciting opportunity for engineers who thrive in hands-on environments, enjoy solving complex technical problems, and want to work directly with the hardware and software powering advanced manufacturing systems. In this role, you will work closely with engineering and manufacturing teams to test new hardware, troubleshoot embedded software, and ensure equipment operates reliably in a high-demand production environment. USeifert Technologies LLC
Massillon, OH 44646 • (40.7 miles) • Full Time • 11/12/2026
Seifert Engineering is seeking a Controls Engineer to support industrial controls upgrades and automation projects across a range of applications, including water/wastewater treatment systems and industrial machinery. Working alongside a senior project manager, this person will develop and update electrical schematics, specify control components, write and edit PLC and HMI programs, support SCADA deployments, integrate safety devices, respond to customer support needs, and deploy code and start up equipment in the field. This is a hands-on role that combines engineering and programming work with customer support and occasional field commissioning. Most customer locations are within about an hour of our Massillon office. Overnight stays are uncommon, though some field days may run long. MilThe Beaver Companies
Canton, OH 44706 • (35 miles) • Full Time • 11/11/2026
Beaver Constructors continues to grow, and we’re looking for motivated people to grow with us. This Project Engineer opportunity at our main office in Canton is a great chance to gain hands-on construction experience, work alongside experienced project teams, and build your career with a growing company. This Project Engineer is responsible for assisting the project team in the planning and execution of successful construction projects. Primary Responsibilities Develops solid working relationships with all project personnel Assists in the preparation of work orders, schedules, drawings, field measurements, subcontracts, and supplier agreements Attends pre-construction meetings; assists with the preparation of action items lists and proposed solutions Provides support to the Project ManagerPremium Oilfield Technologies
Houston, PA 15342 • (37.6 miles) • Full Time • 11/11/2026
Field Service & Sales Technician Location: Houston, PA Full-Time | Travel Required Company: Premium Oilfield Technologies Premium Oilfield Technologies is seeking a Field Service & Sales Technician to join our team. This hybrid role blends hands-on technical field support with customer service and sales engagement. The ideal candidate will have a strong mechanical aptitude, a customer-first mindset, and a desire to drive business success. What You'll Do: Support the preparation and delivery of RCD (Rotating Control Device) equipment for field deployment. Deliver and install RCD systems on-site, ensuring accurate documentation of serial and asset numbers. Conduct equipment checks, inventory assessments, and ticket verification at the wellsite. Provide training to rig crews on RCD operationsProLift Toyota Material Handling
Austintown, OH • (44.7 miles) • Full Time • $26.42 to $41.00 / hr • 11/11/2026
Join the ProLift Toyota Material Handling Service Team! ProLift Toyota Material Handling is seeking an experienced Field Service Technician to provide world-class maintenance and repair services to forklifts and material handling equipment at customer locations. We're looking for professionals who take pride in solving problems, delivering exceptional customer service, and working independently. What You'll Do Diagnose and repair electric and internal combustion forklifts Troubleshoot hydraulic, electrical, engine, drivetrain, and electronic systems Perform scheduled preventative maintenance Utilize manufacturer diagnostic software Complete accurate service documentation Recommend repairs that improve customer uptime and equipment reliability Maintain company vehicle, tools, and inventoryLFP Associates
Lake Mohawk, OH • (21.7 miles) • Full Time • 11/10/2026
This job is posted on behalf of LFP Associates by Top Echelon. STAFF ENGINEER - Akron/Canton, Ohio Area - ENTRY LEVEL TO 5 YEARS EXPERIENCE AND BS TECHNICAL Responsible for all types of engineering that takes place at Corporate and Plant level: ** Equipment design, development, purchase, and installation ** Product design and development ** Material selection and testing ** Tooling design, development, purchase, and installation ** Quality systems, development, and implement ** Problem solving ** Process develop and improvements ** Continuous ImprovementUnited Rolls Inc
Canton, OH 44705-2035 • (35.3 miles) • Full Time • 11/10/2026
Description: Reliability and Project Engineer Position Title: Reliability and Project Engineer Department: Engineering Reports To: Plant Manager Location: United Rolls Inc. – Canton, Ohio FLSA Status: Exempt Position Summary United Rolls Inc. is seeking a highly motivated and technically skilled Reliability and Project Engineer to lead efforts in improving equipment reliability, asset performance, facility infrastructure, and capital project execution throughout our foundry, machine shop, manufacturing operations, and office facilities. This position combines reliability engineering, maintenance improvement, and project management responsibilities to support the production of high-quality iron spun cast rolls. The Reliability and Project Engineer will identify and eliminate chronic equipmeTrilon Group
North Canton, OH • (39.7 miles) • Full Time • 11/10/2026
Description The Mannik & Smith Group, Inc., a respected Civil Engineering and Environmental Consulting Company, with offices located in Ohio, Michigan, West Virginia and Alabama, has an immediate opening for an experienced Geotechnical Engineer/Construction Manager with five plus years’ experience in our North Canton, OH office. Candidate must have experience in geotechnical investigations and design and report preparation along with the following: Key Responsibilities Managing field inspection personnel and directing construction quality assurance certification activities, primarily soils and concrete construction Review of quality control documents and construction plans Preparation of construction drawings and specifications Significant construction management interaction Direct communiPPS-HPS
Massillon, OH 44646 • (40.7 miles) • Full Time • 11/6/2026
FIELD SERVICE TECHNICIAN $55,000–$75,000 | Travel-Focused | Top-Tier Benefits Love solving problems, working hands-on, and seeing the country? Join a great company with an even better culture as a Field Service Technician. You'll be the go-to expert installing, troubleshooting, and repairing advanced electrical, mechanical, and melting systems -mostly on-site at customer locations across the U.S., Canada, and Mexico (75–90% travel). What You'll Do: Install, test, maintain, and repair complex equipment in the field. Diagnose issues using tools like multimeters, oscilloscopes, and signal generators. Troubleshoot PLCs and provide technical support (on-site & phone). Train customers on equipment operation and maintenance. Document repairs and collaborate with engineering & service leadership.SPSI West Inc
Washington, PA 15301 • (38.7 miles) • Full Time • $18.00 to $24.00 / hr • 11/6/2026
Specialized Professional Services, Inc. (SPSI) is hiring full time Field Technicians/Laborers to join our team. You will be responsible for the cleaning and decontamination of regulated materials from spills, trenches, drains, oil/water separators, boilers, tanks, and other industrial cleaning applications. On the job training and all certifications will be provided by the company, no prior experience required but preferred. Job Responsibilities: On Call availability for scheduled rotation and emergencies Identify, remove, pack, transport, or dispose of hazardous materials, waste oil, fuel, transmission fluid, or contaminated soil. Ability to read and understand OSHA safety regulations and perform all tasks safely. Maintain up to date training and education per company policy Comply with pSpecialtyRx
Steubenville, OH 43952 • (12.1 miles) • Full Time • $20.00 to $23.00 / hr • 11/6/2026
About the Job: SpecialtyRx is a Long-Term Care pharmacy providing pharmaceutical services to long term care facilities and assisted living communities. SpecialtyRx takes pride in delivering personalized care and quality pharmacy services. We are committed to supporting healthcare facilities throughout the Pittsburgh, PA and Eastern OH area by maintaining accurate, compliant, and efficient Automated Dispensing Systems (ADS). Our team ensures medications are readily available, properly tracked, and aligned with billing and regulatory standards. ADU Travel Technician - Pittsburgh, PA & Eastern OH Area. Responsibilities: Work independently under the direction of a supervisor. Travel to assigned healthcare facilities throughout the Pittsburgh, PA and Eastern OH area . Maintain active communicatGreenbridge
North Canton, OH 44720 • (42.3 miles) • Full Time • 11/5/2026
Description: The Design Engineer is responsible for taking a leadership role in highly technical equipment design-related projects to support the company's strategic business goals. These projects center mostly around specialized equipment for several different industries. Positive team engagement and motivation is a primary focus of this role. As a senior designer serving our customers, this person will be expected to bring thought leadership to projects, identify opportunities and review other designers' projects. They will collaborate with their functional partners to work through projects from concept to completion. Develop design-driven solutions to solve for business opportunities Design + research opportunities for new products and create prototypes. Design manufacturing processes aMatrix PDM Engineering, Inc.
Pittsburgh, PA 15205 • (40.8 miles) • Full Time • 11/4/2026
Job Summary The Electrical Commissioning Supervisor is responsible for planning, developing, and executing electrical commissioning activities for power generation, industrial, renewable energy, LNG, and balance-of-plant facilities. The role leads electrical testing and commissioning technicians, develops energization procedures, coordinates vendor and contractor activities, and supports the Commissioning Manager in safely bringing electrical systems into service. Essential Functions Actively supports the Company’s commitment to safety and its “Core Values.” Represents the Company at all times with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.” Develop detailed electrical energization, shutdown, and restoration procedures. Lead medium-voltage anKeeley Construction
Canton, OH • (35.3 miles) • Full Time • 11/4/2026
At Keeley Companies, we believe in empowering our people and fulfilling career aspirations. Keeley is a career destination with countless opportunities for advancement, and a world-class family culture that is centered around creating the best possible environment for our people to thrive. We are looking to hire a Field Engineer for our Heavy Industries Group. This person is required to travel at 100% Primary Responsibilities: Assist in interpretation of drawings and specifications for field crews and craft supervision. Perform quantity calculations by taking measurements and determining percentage of completed/installed materials and work. Assist in the preparation of work plans and work packages. Assist in field surveying and work layout support including elevation, control points, and cThe Mannik & Smith Group
North Canton, OH • (39.7 miles) • Full Time • $33.65 to $40.87 / hr • 11/4/2026
Description The Mannik & Smith Group, Inc. (MSG) is a people focused, award-winning, full-service consulting firm that offers a wide array of services including civil and geotechnical engineering, environmental consulting, planning, landscape architecture, agriculture, surveying and construction support. Our talented staff of more than 650+ professionals deliver integrated planning, design, engineering and construction solutions. Due to MSG's continued growth, a new opening is available for an Agriculture Project Engineer to assist with our projects in North Canton, OH! Key Responsibilities Assist with the design of agricultural facilities and infrastructure. Prepare engineering drawings using AutoCAD/Civil 3D . Support site layout, grading, drainage, and stormwater designs. Develop plansFred Olivieri Construction
North Canton, OH 44720 • (42.3 miles) • Full Time • 11/3/2026
Fred Olivieri Construction Company is a trusted, family-owned, general contractor and construction manager based in North Canton, OH. Our work spans three specialized divisions-retail, restaurant, and commercial-and we are licensed to operate in 38 states across the country. Since our founding in 1959, we’ve upheld our commitment to building at a higher standard, a promise reflected in the long-standing relationships and repeat business of our valued clients. Position Summary The Project Engineer supports the successful planning, coordination, and execution of construction projects. This role works closely with the Project Manager, Superintendent, subcontractors, and clients to ensure projects are completed on time, within budget, and in compliance with quality and safety standards. PleaseCDR Companies
Warrendale, PA • (44.2 miles) • Full Time • 11/3/2026
JOB SUMMARY: This role will be responsible for performing a variety of complex project management functions for multiple transportation projects. It is expected the position may plan, organize, lead, implement, and control various projects in support of the Regional Program Management Director and in conjunction with other project managers in the division. ESSENTIAL FUNCTIONS: Oversee multiple concurrent projects for an agency program; including financial management, funding oversight, project management and administration, and reimbursement processes. Proactively monitor the performance of projects, including quality, schedule and budgets. Develop plan of action to address any hurdles forecasted to impact the project performance, as needed. Oversee and coordinate technical design and planButech Bliss
Clayton, OH 44460 • (30.9 miles) • Full Time • $32.00 to $38.00 / hr • 11/3/2026
CNC Programmer Summary: Develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems. Essential Job Functions: Determine the sequence of machine operations and select the proper cutting tools needed to machine work pieces into the desired shapes. Revise programs to eliminate errors, and retest programs to check that problems have been solved. Analyze job orders, drawings, blueprints, specifications, and design data to calculate dimensions, tool selection, machine speeds, and feed rates. Determine reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures. Observe machines on trial runs or conduct computer simulations to ensure that programs and machinery will function properlOWL Services
Pittsburgh, PA 15231 • (36.5 miles) • Full Time • $24.00 to $26.00 / hr • 11/3/2026
Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging RecognitionMRINetwork Jobs
North Canton, OH 44720 • (42.3 miles) • Full Time • 11/2/2026
We are representing a multidisciplinary Construction Engineering firm spanning Civil, Architectural, Environmental, Surveying, and Field Services that is seeking a Project Engineer with Aviation project experience in OH. Bachelor's degree in Civil Engineering from an ABET-accredited university 3-5 years of relevant experience in land development, aviation, or related fields PE license preferred, or ability to obtain within a reasonable timeframe Proficiency in Autodesk Civil 3D and related design software; FAA design standards experience a plus Strong written and verbal communication skills and the ability to manage multiple projectsKleen Test Products
Strasburg, OH 44680 • (36.4 miles) • Full Time • 10/31/2026
If you are an engineer who likes being on the manufacturing floor, troubleshooting equipment, improving how machines run, and seeing your projects go from an idea to a working production solution, this may be the role for you. Kleen Test Products (KTP), one of North America's largest contract manufacturers and packagers of wet wipes, liquids, and other consumer products, is looking for a hands-on Manufacturing Project Engineer to join our Strasburg, OH operation. This isn't a desk-only engineering position. You'll work directly with production equipment, Maintenance, operators, Quality, customers, vendors, and plant leadership to solve manufacturing problems, improve existing lines, and bring new equipment and processes into production. What You'll Work On Troubleshoot and solve mechanicalAlliance Technical Group
Jewett, OH 43986 • (7.8 miles) • Full Time • 10/31/2026
Are you tired of technician or maintenance jobs that don’t offer you the career growth you are looking for? Do you want a job that offers more stability than turn around work? Would you want to learn a skilled trade in the oil and gas industry? How about a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a rapidly growing industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $20.00/hr to $22.00/hr, use of a take home company vehicle with a clear career path for upward mobility, paid time off, great benefits, and annuExpress Employment Professionals - Pittsburgh West
Darlington, PA 16115 • (32.1 miles) • Full Time • $30.00 to $38.00 / hr • 10/31/2026
Excellent oppurtunity for a Field Service Tech perefrably with a CDL A Drivers License in Darlinton, PA Direct Hire Opportunity $30 with no CDL-A, but we highly prefer to hire someone with a CDL-A. $32 - $34 per hour preferred range and potential for $34 - $36 per hour starting rate for exceptional candidates. Core Responsibilities: Create and sustain a safe working environment and culture within the company Communicate well with customers Must be able to work well in a team environment Ensure company property is well-maintained Desire to learn Skill Requirements: **Active Driver’s License ** Perform physical functions per job requirements Solution-oriented mindset Proficient with mechanical tools and equipment Beneficial Qualities: 2 years Field Service experience Hazardous Materials EndoBlackRock Resources LLC
Wintersville, OH 43944 • (6 miles) • Full Time • 10/30/2026
You must be able to work in the U.S. without sponsorship. No C2C or 3rd parties, please. Electrical Engineer – Power & Controls Systems in Richmond, OH Full-Time | Direct Hire On-Site (Monday–Friday) Travel: Approximately 10% Are you an Electrical Engineer with experience in power distribution and industrial control systems? We're looking for a talented engineer to join a growing team designing and commissioning electrical power and control systems for oil & gas facilities. If you enjoy solving complex engineering challenges while working on projects from design through startup, we'd love to hear from you. What You'll Do: Design, develop, and analyze electrical power distribution systems, motor control centers (MCCs), and low- and medium-voltage equipment Develop and implement PLC, DCS, anLanceSoft Inc
Wheeling, WV 26003 • (29.3 miles) • Full Time • $120,000 to $145,000 / yr • 10/30/2026
Job Title: Project Manager (PE/Licensed Professional Engineer) Type of Employment: Direct Hire Fulltime Location: Wheeling, WV 26003 120-145K Max per annum with client benefits depending on experience Job description: Who we are: Client is a national environmental and engineering consulting firm where talented professionals can work on meaningful projects that improve communities and support sustainability initiatives. With a strong focus on people, flexibility, mentorship, and career development, Client s offers the opportunity to make an impact while growing alongside industry experts. We are seeking a Water & Wastewater Project Manager to grow our Water Engineering team in our Wheeling, WV office. The successful candidate will use their expertise and technical knowledge in planning, desGriffin Fluid Management
Canonsburg, PA 15317 • (39.7 miles) • Full Time • 10/30/2026
Field Technician - Bypass Pumping Location: Canonsburg, Pennsylvania 15317 Work Type: Full-Time, On-Site About Griffin Fluid Management Founded in 1934, Griffin Fluid Management is the industry leader in dewatering and groundwater control solutions. Guided by an unwavering commitment to our core values, we lead through continuous improvement and profitable growth. We build lasting relationships with clients by delivering safe, timely, and professional engineered solutions tailored to their unique dewatering, groundwater control, and pumping needs. Our success is built on the foundation of empowered, knowledgeable, and dedicated employees who share our commitment to integrity, respect, and performance. Learn more ator follow us on LinkedIn. Position Overview Join our team as a Field TechnicE Tech Group
Canton, OH • (35.3 miles) • Full Time • 10/30/2026
At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national and global scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking a Senior Controls Engineer who will be part of a growing business to support the design, deployment, testing, and maintenance of control system projects. ResponsibilitITS
Canton, OH 44702 • (35.3 miles) • Full Time • 10/28/2026
Curtain Wall / Faade Design Engineer - Canton, OH - JOB 26-00668 Salary Range: $86,000 - $120,000 Full-Time Permanent Position with Benefits A Canton, Ohio area manufacture is seeking to hire experienced Curtain Wall / Faade Design Engineer to create accurate 2D drawings, 3D models, and instructional diagrams for large-scale building facades using software such as Revit, AutoCAD, Rhino, Inventor, and Bluebeam. Responsibilities Detailing & Modeling: Develop detailed 2D shop drawings, 3D CAD/BIM models, and step-by-step assembly diagrams for complex building enclosure components using AutoCAD, Revit, Rhino, and Inventor. Manufacturing Support: Provide direct technical guidance to production supervisors and fabrication teams throughout the manufacturing process to resolve build issues and ensPEAK Technical Services Inc.
Leetsdale, PA 15056 • (35.8 miles) • Full Time • $24.00 to $26.44 / hr • 10/28/2026
Job Summary Join our team in Leetsdale, Pennsylvania, a vibrant community known for its rich history and close-knit neighborhoods. The Field Service Technician performs tasks related to mechanical and electrical assemblies and sub-assemblies. This role involves repairing, building, and preparing industrial machinery at customer facilities and our Leetsdale location. The position requires mechanical aptitude, computer skills, and attention to detail. It also involves physical movement and the use of material handling equipment. You will report to the Service Manager. Responsibilities Assemble equipment according to engineering drawings, schematics, and company standards based on warranty or repair orders and production schedules. Utilize hand, electric, and pneumatic tools for assembly taskAdex Corporation
Carnegie, PA 15106 • (40.7 miles) • Full Time • 10/28/2026
Field Technician Level 1 - Job Description Position involves performing basic, often supervised, installation and maintenance tasks in telecommunications central offices, focusing on the physical aspects like running cables, racking equipment, and initial site preparation. This level requires familiarity with basic tools and equipment, the ability to work under direction, perform continuity testing, maintain clean work areas, and adhere to safety procedures. Responsibilities & Duties- Installation and Physical Tasks: Physically install, remove, and modify telecommunications equipment and infrastructure. Run and dress copper and fiber optic cables, ensuring proper lacing and stitching. Install basic racking and equipment. Testing and Verification: Conduct lead verification and continuity teSystem One
Pittsburgh, PA 15205 • (40.8 miles) • Full Time • 10/28/2026
Lead Field Service Technician Location: Imperial, PA (75% Travel) Type: Full-Time About the Opportunity System One is seeking a Lead Field Service Technician to support a global industrial technology organization that provides specialized equipment and service solutions for heavy industry and training environments. This role supports equipment service projects in two primary sectors: Fire training simulator systems used at airports, firefighting academies, and military bases Steel mill processing equipment used in heavy industrial manufacturing environments The ideal candidate will serve as a technical leader in the field, ensuring work is completed to company standards while helping train and mentor service technicians. Position Overview The Lead Field Service Technician will act as a senNR Consulting LLC
Hartville, OH 44632 • (41.6 miles) • Full Time • 10/28/2026
Role Manufacturing Engineer Location : Hartville, OH Job Type: Direct Hire The Manufacturing Engineer is responsible for driving operational excellence through process improvement, manufacturing support, safety leadership, environmental compliance, facilities management, and equipment reliability within a plastics manufacturing environment. This role serves as a key technical leader responsible for improving productivity, quality, safety, and cost performance while ensuring compliance with all regulatory requirements. The Manufacturing Engineer works closely with production, quality, maintenance, and leadership teams to support continuous improvement initiatives, capital projects, and sustainable plant operations. Required " Bachelor's degree in Manufacturing Engineering, Mechanical EngineU.S. Army
Wellsburg, WV 26070 • (21.2 miles) • Full Time • 10/28/2026
The technical engineer supervises or participates in construction site development in areas such as technical investigation, surveys, drafts and construction plans/specifications. They conduct land surveys, make maps and prepare detailed plans for construction projects. Job Duties: Perform field and laboratory tests on construction materials, surveys and drafts. Draw topographic maps and charts using Computer Aided Drafting systems and software. Conduct geodetic and construction surveys and results utilizing Automated Integrated Survey Instruments and Global Positioning Survey Technology. Draw diagrams for wiring and plumbing of structures. Provide technical support for vertical and horizontal construction projects. Build scale models of land areas that show hills, lakes, roads and buildinKeystone Clearwater Solutions
Triadelphia, WV • (31.2 miles) • Full Time • $20.00 to $35.00 / hr • 10/28/2026
Description As a Field Automation Technician , you’ll support our automated water transfer systems in the field. This technical, hands-on role involves installing and maintaining sensors, troubleshooting electronics, configuring devices, and ensuring safe and efficient operations at remote customer sites. You'll split time between field work and shop-based equipment repairs, reporting directly to the Manager of Automated Operations. This role is based out of our Triadelphia, WV Automation Shop. Responsibilities Set up and rig down automation equipment on site Perform diagnostics, repairs, and maintenance on sensors, valves, and controls Use hand tools, diagnostic gear, and software to configure and test systems Respond to field service calls and troubleshoot real-time issues Interact withAbbott Electric Inc.
Canton, OH 44707 • (32.3 miles) • Full Time • $35,000 to $70,000 / yr • 10/28/2026
Company Overview: Abbott Electric, Inc. is a leading electrical contracting & design/build firm dedicated to delivering high-quality electrical solutions to commercial and industrial clients in the N.E. Ohio area. With a commitment to innovation, safety, and customer satisfaction, we are seeking a skilled Electrical Designer or CAD Design Drafter to join our team and contribute to our ongoing success. Position Overview: As an Electrical Designer or CAD Design Drafter at Abbott Electric, Inc., you will play a key role in the computer-aided drafting & design of electrical systems for various projects. Working closely with project managers, engineers, and clients, you will be responsible for creating detailed electrical plans, layouts, and specifications that adhere to industry standards andStephenson Equipment, Inc.
McDonald, PA 15057 • (34 miles) • Full Time • 10/28/2026
Description: Stephenson Equipment, Inc (SEI), an industry leader in Pennsylvania, New York, Maryland, and D.C, providing sales, rentals, parts and service for construction equipment, cranes, paving, road building and road maintenance equipment, has an immediate need for a Crane Field Service Technician in our McDonald, PA location. Duties include but are not limited to: · Repair and replace damaged or worn parts · Operate and inspect cranes in order to diagnose defects · Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications · Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices · Dismantle and reasseECLIPSE SCREENING TECHNOLOGIES LLC
Pittsburgh, PA 15202 • (42.8 miles) • Full Time • $55,000 to $65,000 / yr • 10/27/2026
Eclipse Screening Technologies is a leading provider of advanced drug detection solutions specifically designed for use in correctional facilities. We are a lifeline to our customers creating another layer of defense against dangerous chemical threats. We serve over 100 correctional facilities throughout the US in 26 states and growing. We are seeking a highly skilled, experienced, and motivated Field Service Technician to join our team and help grow our business. As a Field Service Technician, you will be the face of our company to our customers, you will play a critical role in ensuring the effective installation, maintenance, repair and training of our drug detection product in correctional facilities across the United States. You will also provide remote and onsite technical support toErgon, Inc - Refining & Marketing
Newell, WV 26050 • (16.7 miles) • Full Time • 10/25/2026
Ergon - West Virginia, Inc. in Newell, WV currently has an opening for a Process Engineering Supervisor . This position supplies leadership and technical, chemical, and engineering support to Process Engineers and the Operations department including monitoring, troubleshooting, optimization, and project development. We are a great company with great pay and great benefits. Ergon is a relationship-driven company that values each employee's willingness to learn and contribute to the team. We are family owned and we pride ourselves on maintaining a small company feel. Process Engineering Supervisor Responsibilities Provides leadership, mentoring and direct supervision for the Process Engineers. Provides oversight for the Process Engineering Co-Op program. Coordinates research or studies to deMoody And Associates, Inc.
Washington, PA 15301 • (38.7 miles) • Full Time • $90,000 to $130,000 / yr • 11/22/2026
Description: Build Infrastructure That Shapes Communities For over 135 years, our clients and business partners have relied on Moody and Associates (Moody) as their expert, trusted partner for water, environmental, energy, and civil engineering projects. In support of our continued company growth, we are seeking a licensed Civil Project Engineer to lead diverse infrastructure and site development projects throughout Pennsylvania, Ohio, West Virginia, and the surrounding regions. This is an excellent opportunity for a motivated Professional Engineer who enjoys managing projects from concept through construction completion while mentoring junior staff and building strong client relationships. Our engineering talent can be based near any of our office locations, including Washington, Erie, MeWestinghouse Electric Corporation
Cranberry Township, PA • (44.3 miles) • Full Time • $69,200 to $86,500 / yr • 11/22/2026
Are you interested in being part of an innovative team that supports Westinghouse’s mission to provide clean energy solutions? At Westinghouse, we recognize that our employees are our most valuable asset and we seek to identify, attract and recruit the most qualified talent while recognizing and encouraging the value of diversity in the global workplace. About the Role: As an Engineer II - Mechanical you will report to the Manager, RVI Load Development & Analysis • Reactor Component Engineering and be located at our Cranberry Township, PA location. This role has a hybrid work schedule. No relocation assistance is provided for this role. Key Responsibilities: Perform design and analyses for the repair, modification and qualification of components within the primary pressure boundary of WestLennon Smith Souleret Engineering
Aliquippa, PA 15001 • (30.9 miles) • Full Time • 11/21/2026
LSSE Civil Engineers and Surveyors is looking for an Assistant Engineer to join our team. We are a 180+ person civil engineering and surveying consulting firm with over 10 locations primarily located in western Pennsylvania. LSSE’s projects support public infrastructure and community development. Our clients include local boroughs and townships, water and sewer authorities, industrial and residential land developers, and utility companies. The candidate will gain experience in the following areas: sanitary sewer assessment; environmental planning and permitting; project budgeting and financial analysis; funding source administration; design and construction of water and sewer infrastructure capital improvements. Qualifications: Bachelor’s degree in Civil Engineering, Environmental Science,Vanscoy Rare Pharmacy
Coraopolis, PA 15108 • (35.9 miles) • Full Time • 11/21/2026
Purpose: The Sr. Analyst, Data & Analytics Engineering provides strategic and tactical support to Vanscoy Rare Pharmacy and will report directly to the Data Analytics Manager. The Sr. Analyst, Data & Analytics Engineering works directly with Vanscoy Rare Pharmacy teams to determine reporting requirements, develop data pipelines, and distribute reports on to internal and external stakeholders. As a Sr. Analyst, Data & Analytics Engineering, you will be responsible for designing, developing, and maintaining our data infrastructure, ensuring the efficient and secure processing of large volumes of data, and providing actionable insights through data visualization. You will serve as an organizational expert on data infrastructure by working closely with Vanscoy Rare Pharmacy leadership, determiHyatt Regency Pittsburgh International Airport
Pittsburgh, PA 15231 • (36.5 miles) • Full Time • $20.00 / hr • 11/21/2026
Join us at Hyatt Regency Pittsburgh Airport! At Hyatt, we believe our guest select Hyatt because of our caring and attentive associates who are focused on providing efficient service and meaningful experiences. What you will be doing The Engineer is responsible for ensuring that the property is maintained in the best possible condition at all times with the least amount of inconvenience to customers and employees. The Engineer performs diagnosis, preventive maintenance and repair of building mechanical systems. Knowledge of HVAC, plumbing, electrical, life safety systems and basic computer skills a must. 2 years trade experience and/or completion of trade school. The Engineer will assist the front office with delivering guest requests. This person will also be required to assist with securValtronics
Canonsburg, PA 15317 • (39.7 miles) • Full Time • $80,000 to $105,000 / yr • 11/21/2026
Valtronics Sales – Southpointe Office, Pennsylvania About Us: Valtronics Sales, family-owned and operated company headquartered in Ravenswood, WV, is a trusted supplier of valves and instrumentation serving customers in the power, chemical, steel, and municipal markets. From our Southpointe office, we proudly support clients across Western Pennsylvania, Northern West Virginia, and Northeastern Ohio with technical expertise and reliable solutions. We are seeking a motivated and experienced Outside Sales Engineer/Representative to join our growing team. If you have a passion for industrial sales and enjoy building lasting customer relationships, we’d love to hear from you. Responsibilities: Develop and grow sales within the assigned territory (Western PA and Northern WV) Identify new businesLiberty Personnel Services, Inc
Carnegie, PA 15106 • (40.7 miles) • Full Time • 11/21/2026
Civil Engineer – Land Development Responsibilities Design and develop civil/site plans for land development projects Prepare grading, drainage, utility, erosion and sediment control, and stormwater management plans Perform site layout and grading calculations Assist with permitting and coordination with local municipalities and regulatory agencies Prepare technical reports, calculations, specifications, and construction documents Coordinate with surveyors, architects, engineers, contractors, and other project stakeholders Review plans and specifications for accuracy and compliance with applicable standards Assist with construction administration, site inspections, and responding to contractor questions Manage project tasks, schedules, and deliverables as experience level allows Support senDGI - Menard INC
Pittsburgh, PA 15220 • (43.8 miles) • Full Time • 11/21/2026
Job Duties and Responsibilities: Supporting all safety efforts and promoting Company safety culture to all levels of coworkers and clients. Assisting project teams with coordinating activities to ensure they are pre-planned for safety through scope review and pre-construction meetings. Working with field operations teams to ensure compliance with safety and environmental regulations. Working with field operations to develop and update Safe Work Practices. Assisting in incident investigations and corrective actions. Conducting site hazard inspections of work operations and completing required reports and notifications. Providing administrative and technical direction and updates on the safety program. Assisting project management teams to ensure compliance with all safety policies. ConductiRemington & Vernick Engineers
Pittsburgh, PA 15237 • (44.3 miles) • Full Time • $92,000 to $151,800 / yr • 11/21/2026
POSITION SUMMARY: Remington and Vernick is seeking a licensed Professional Engineer (PE) with a minimum of 8 years of experience in HVAC/mechanical, plumbing, and fire protection systems design , including fire alarm systems, to join our growing MEP team as a Project Manager/Engineer . This role involves overseeing projects from concept through construction, mentoring junior staff, and playing a key role in delivering high-quality engineering services for educational, commercial, and industrial facilities. This position will be involved in the planning, design, and documentation of mechanical systems for a variety of project types, including educational, commercial, institutional, and industrial facilities. The ideal candidate has a well-rounded mechanical background, strong technical fundECI
Lawrence, PA 15055 • (41.2 miles) • Full Time • 11/21/2026
Description: Equipment & Controls, Inc. is a successful and innovative Emerson Impact Partner. ECI provides an entrepreneurial opportunity for each employee to achieve our common mission of Delivering Successful Customer Outcomes 100% of the Time . Our customer base includes oil and gas, chemical, power, food and beverage, mining and metals, life sciences, pulp and paper, refining, petrochemical, OEM and nuclear industries. With offices in Pennsylvania, West Virginia, and Ohio, ECI is the region’s leader in process control and industrial automation products and solutions. We seek individuals that share our passion for excellence. Business Unit/Department: Process Systems & Solutions Location: Lawrence, PA Job Summary: As an Inside Sales Engineer for Process Systems and Solutions (PSS), youKLH Engineers, Inc.
Pittsburgh, PA 15205 • (40.8 miles) • Full Time • 11/20/2026
At KLH Engineers, our team of engineers, surveyors, and drafters, works on projects that ensure safe drinking water gets where it needs to go, wastewater is properly treated, and stormwater stays under control. Since 1982, we’ve partnered with numerous municipal clients across Pennsylvania, delivering top-notch services in water, wastewater, stormwater, and general municipal engineering. We bring creativity, technical excellence, and practicality to every project, ensuring our engineering solutions not only work but also make life a little easier for everyone. We’re currently looking for a Control Systems Engineer / Technician to join our growing SCADA group in our Pittsburgh, PA office. This role is well-suited for someone with networking/computer skills and hands-on electrical/electronicSchmidt Technology Corporation
Cranberry Township, PA 16066 • (44.3 miles) • Full Time • $50,000 to $60,000 / yr • 11/20/2026
Description SCHMIDT Technology is seeking a self-motivated individual to provide technical sales support for customer inquiries. Key responsibilities include maintaining customer relationships through various communication channels, including in-person visits; conducting application testing and evaluation; assisting with product selection; developing solutions; preparing proposals; and conducting follow-ups. Qualifications Willingness and aptitude to learn new skills; ideally, experience in the manufacturing industry (automation industry is a plus) Ability to read and interpret mechanical drawings General understanding of PLC-based controls, electrical, and pneumatic systems, including reading and interpreting schematics. Ideally, experience with conventional toolroom equipment, i.e., caliAcuative Corporation
Carnegie, PA 15106 • (40.7 miles) • Full Time • 11/20/2026
Overview : Acuative , the nation's leading independent provider of telecommunications field services, looks to partner with Contract (1099) Field Service Technicians to provide installation and maintenance services to voice (analog and VOIP), data networks, servers, routers/switches, computer systems, retail technology systems, and other network-based hardware. Jobs can have a 4-hour response time and usually complete in 2 to 4 hours on site. The successful candidate will spend the majority of their time covering an area within 50 miles of the Phoenix area. Primary Duties and Responsibilities : Installation and maintenance of networking hardware including routers, switches, and WAP’s. Installation and maintenance of telephony equipment and circuits. Installation and support of retail technStratus Team LLC
Coraopolis, PA 15108 • (35.9 miles) • Full Time • $160,000 to $180,000 / yr • 11/20/2026
About Stratus Stratus® is an integrated, multi-disciplinary engineering, architecture, interior design, and consulting firm. Consistently ranking among the Top 500 Design Firms in Engineering News-Record, the firm offers a deep bench of industry experts through a highly collaborative approach, delivering innovative solutions across the full project lifecycle. Operating coast to coast, Stratus® serves clients nationwide while maintaining a strategic commitment to supporting high-growth economies and building vibrant communities that foster the professional growth of its team. Serving public- and private-sector clients, the firm is dedicated to delivering the highest-quality service wherever projects take shape. Across the Civic, Commercial, Industrial, Transportation, Education, Water ResouRETTEW
Pittsburgh, PA 15205 • (40.8 miles) • Full Time • 11/20/2026
Description: The Opportunity RETTEW is seeking a Senior Traffic Engineer | Technical Lead to join our Transportation team and help guide the technical delivery and continued growth of our traffic engineering services. This opportunity is designed for an experienced traffic engineer who wants to remain actively involved in complex technical work while expanding their influence across projects, teams, and client relationships. You will lead and review traffic engineering analyses, studies, designs, and technical deliverables while serving as a trusted resource for clients, project teams, and developing professionals. You will also help establish technical approaches, strengthen quality standards, mentor staff, and solve complex transportation challenges. Traffic engineering professionals canSeegrid
Pittsburgh, PA 15275 • (36.6 miles) • Full Time • 11/19/2026
Why Join Seegrid? Seegrid is the leading provider of Physical AI for material handling. Our solution includes autonomous mobile robots (AMRs), fleet management software, actionable analytics, and best-in-class services and support. Our technology is proven. Our AMRs have safely driven millions of autonomous miles in real-world production facilities. We are seeking energetic, bright, and friendly people to help achieve our vision: to fortify global supply chains and create profitable economies with safe, seamless, and smart mobile robotics solutions. About the Role: To ensure that customers receive high quality, safe and standards-compliant Autonomous Mobile Robots (AMR), Seegrid seeks a Quality Engineering (QE), who will participate in the hardware design and modification of new vehicles,Central Maintenance & Service
Pittsburgh, PA 15220 • (43.8 miles) • Full Time • $28.00 to $36.00 / hr • 11/19/2026
We are seeking a skilled and reliable HVAC/Maintenance Engineer to join our team. This role involves a variety of hands-on tasks, including: Perform maintenance and repairs to the mechanical, plumbing, structural, furniture, fire, life safety, and control systems. Keep facility and building systems up to applicable standards as assigned. Follow all applicable codes, regulations, governmental agency, and company directives related to building operations and work safety. Maintain an energy management program. Ensure all systems operate in the most efficient manner! Assist with the implementation of a preventive maintenance program to ensure that building machinery and systems meet or exceed their rated life. Perform emergency repairs as needed. Review inspection to building systems includingO'Neal Fabrication
Ambridge, PA 15003 • (36.4 miles) • Full Time • $22.00 to $29.00 / hr • 11/19/2026
Position Summary The Engineering Technician will design, program, manufacture, and verify a variety of programs, setups, and fixtures for NC machines and offline processes. They will also assist Production and Quality as a technical resource for trouble shooting and applications assistance. Duties and Responsibilities Creation and verification of setups, fixtures, and programs for NC machines and offline processes. Assist in the training of production employees on setups, fixtures, and machine operations. Trouble shooting and applications assistance on machining, burning, forming, and welding processes. Process improvement identification and implementation. Modeling and exportation of new parts and rev changes. Assists the Manufacturing Engineer with developing, managing, and implementingWestinghouse Electric - USA
Cranberry Township, PA 16066 • (44.3 miles) • Full Time • $35.00 to $40.00 / hr • 11/19/2026
Step into a day where your designs support clean energy. At WECTEC Staffing Services, a wholly-owned subsidiary of Westinghouse Electric Company LLC, we champion innovation and diversity as we help power a cleaner future. You’ll join an innovative team supporting Westinghouse’s mission to deliver clean energy solutions. Role at a Glance NEW GRADS APPLY! This is an onsite, long-term contract role based in Cranberry Twp, PA , reporting to the Manager of Hardware Engineering . Must be a US Citizen or Permanent Resident to qualify. A Day in Your Life Morning: You’ll translate requirements into robust, buildable designs-modeling sheet-metal cabinets, custom internal metalwork, and precision fasteners in 3D to meet seismic integrity and manufacturing ease. You’ll manage BOMs and revision controlBarton Associates Inc.
Pittsburgh, PA 15205 • (40.8 miles) • Full Time • 11/18/2026
Description: About Barton Associates Barton Associates is a premier, multi-disciplinary engineering firm with a storied history of providing innovative MEP (mechanical, electrical, and plumbing/Fire Protection) design, and architectural lighting solutions. With 6 office locations, we are committed to delivering excellence in the built environment. We take immense pride in being an Employee-Owned Firm. That means our success is your success, a fact reflected in our culture and our numerous accolades: Recognized as a Top 100 MEP Firm by Consulting-Specifying Engineer Best Places to Work in PA At Barton Associates, we don’t just build systems; we build careers where every employee has a stake in the outcome. The Role: We are seeking an experienced Electrical Engineer to join our team. The ideHormann Flexon LLC
Imperial, PA 15126 • (31.2 miles) • Full Time • 11/17/2026
Major Responsibilities/Activities: Construct assembly drawings, costed BOMS, and standardized work instructions for new product introductions. Provide day-to-day manufacturing engineering support to loading dock equipment and impact door production lines. Work with field services to create and maintain installation, service, and training Troubleshoot manufacturing, equipment, and assembly issues to minimize downtime and maintain production schedules. Work with maintenance personnel to develop equipment PM plans Act on Engineering Change Requests as needed. Lead Lean Manufacturing and Continuous Improvement initiatives focused on safety, quality, delivery, and cost. Analyze production data and identify opportunities to reduce waste, improve cycle times, and increase productivity. Provide te