Kent, OH 44243 • (22.8 miles) • Full Time • 9/18/2026

Precision Assembler - Assembly TechnicianLocation:Kent Assembly AreaSchedule:1st shift, Mon–Fri, 7am–3pm (8 hours, 1-hour paid lunch)Pay:$18–24/hour, annual bonus; temp-to-hire (2–3 months)Benefits:Begin on day one with MaagRole Overview: Work in our Pump Repair Cell, assembling mechanical and electrical components. Candidates with hands-on mechanical experience (working on cars or similar) are preferred.Key Duties:Interpret assembly drawings, blueprints, and electrical printsUse micrometers, feeler gauges; understand tolerancesKnowledge of pneumatic systems, pipes, valves, fittingsPosition, lift, and assemble parts (up to 50 lbs)Forklift operation requiredWire electrical components per drawingsDocument hours, complete quality checksRequirements:Good physical condition; frequent lifting, b

Sebring, OH • (0 miles) • Full Time • 9/18/2026

**Job Opportunity: Finisher** **Location:** Sebring Area **Shift:** 1st Shift **Hourly Rate:** $19.07 per hour **Join a Reputable Company and Kickstart Your Career!** We are currently looking for **exceptional candidates** to join our team as Finishers. This is a **temporary position** with the potential to transition into **permanent placement**! If you're ready for a new opportunity in a fast-paced manufacturing environment, this could be the job for you! **Key Responsibilities:** **Manual Labor**: Lift, reach, stack, package, and assist with various tasks to complete projects successfully. **Component Assembly**: Accurately assemble components in a timely manner. **Precision Measurement**: Use tape measures, calipers, and blueprints (preferred but not required). **Physical Requirements*

Canton, OH • (19.6 miles) • Full Time • 9/17/2026

The Mold Setter / Assistant Supervisor is responsible for supporting shift production by setting and maintaining plastic injection molds, as well as support equipment. The position works closely with other departments to ensure customers’ demands are met at the highest level of quality. This position provides back up and support to Production Supervisor.Job Duties:Complete mold changes per production schedule following all checklist to ensure mold is properly set for operationFollow the procedures to start up and shut down presses.Ensure products meet the quality standard and make any necessary adjustments to the presses.Perform Preventive Maintenance of molds as assigned.Follow all Safety Procedures including but not limited to: Lock Out / Tag Out, Crane Inspection, Housekeeping.Complete

Niles, OH 44446 • (23.5 miles) • Full Time • 9/17/2026

Benefits/PerksCompetitive CompensationGreat Work EnvironmentCareer Advancement OpportunitiesJob SummaryWe are seeking a Mechanical Engineer to join our growing team! As a Mechanical Engineer on our team, you will be working extensively with other engineers and the product development team to design, research, and evaluate existing and new products, including handling production concerns and specifications, fabrication, and the operation of the product. You will also assist in investigating product errors or failures, work with other departments to implement changes, and provide technical assistance as needed. The ideal candidate has experience with mechanical design, strong 3D software experience, and works well within a team environment.ResponsibilitiesRead blueprints, computer-generated

Alliance, OH 44601 • (5.4 miles) • Full Time • 9/17/2026

Pay: $15.00 - $16.00 per hourJob description:Line OperatorMarlboro Manufacturing, a leader in continuous hinge manufacturing, is looking for full-time candidates to work in our manufacturing.Working Hours 10 hour shifts 6:30 AM - 5:00 PM Monday through Thursday with some overtime on Friday as required.RequirementsMust have reliable transportationMust be safety conscious and follow safety rulesMust be be able to lift up to 70 lbs.Basic computer and math skillsAttendance is keyMust pass a Drug and Alcohol screeningQualifications:Must be able to bend and stand to operate machinesMust be able to carry out instructions and training both in written or verbal formShows the ability to use measuring tools, tape measure, calipersBe able to or learn to set up machinesMust be able to write legiblyAssi

Youngstown, OH 44509 • (21.5 miles) • Full Time • 9/17/2026

Description: Join our team at Accuform Precision!AccuForm Precision, established in 1988, is a growing CNC machine shop proudly machining high-value, complex, multi-sided aluminum castings for a wide range of industries including medical, military, aerospace, transportation, and telecommunications. Our culture is built on Teamwork, Reliability, Accountability, and Integrity. We value our people, celebrate great work, and support learning and growth every day. We are seeking 1st shift Shipper and Assembly personnel to join our growing team.Why AccuForm Precision?Great Company Culture: A team committed to the core values of Teamwork, Integrity, Accountability, and Reliability, striving for excellence and the Perfect Day Philosophy.Competitive Pay: $18 - $19 / hourBenefits: Medical, dental, v

Akron, OH • (28.2 miles) • Full Time • 9/17/2026

We are working with a well established manufacturer in the Wadsworth, Ohio area in need of an Electrical Supervisor to oversee the Electricians in a manufacturing environment.The Electrical Supervisor plays a critical role in the day-to-day electrical and instrumentation supervision of hourly technicians to meet goals safely and effectively, in accordance with company policies and all regulatory and corporate compliance requirements.Duties and Responsibilities:Responsible for EHS, MOC, GMP, and Q.C. Compliance in department/shiftConduct weekly safety and quality meetingsResponsible for Impacting Electrical and Instrument Equipment UptimeResponsible for Impacting PM ComplianceWorks closely with Production Supervisors and Operators for troubleshooting purposes and Project Engineers for new p

Twinsburg, OH 44087 • (35 miles) • Full Time • 9/17/2026

Field Service EngineerStarting Compensation: Approximately $80,000 annualized, plus overtime at time-and-a-halfTravel: Typically 2–6 overnight stays per monthThe OpportunityOur client is an established Northeast Ohio manufacturer of specialized electrical equipment used in utility, industrial and manufacturing environments.They are seeking a hands-on Field Service Engineer / Field Service Technician who can eventually develop into the company's Field Engineering Manager.This is a unique succession opportunity. The person hired will train directly under the company's current field engineering leader, a highly knowledgeable technical professional who has been with the organization for more than 20 years. The goal is to transfer his technical knowledge and customer experience to the new hire

Alliance, OH 44601-0000 • (5 miles) • Full Time • 9/16/2026

This is a position for IML Containers OhioThe Line Packer is responsible for inspecting finished products(plastic food containers), packing them according to requirements, and maintaining adequate packaging supplies at the machine. This role supports product quality, traceability, and FSSC 22000 food safety requirements by ensuring products are handled correctly, records are completed accurately, and the work area is maintained in a clean, safe, and hygienic condition.Essential Duties and Responsibilities:Follow the food safety rules in place, including but not limited to handwashing and hand sanitizing regularly, avoid the use of jewelries inside production floor, etc.Perform visual inspection of finished products and verify quality meets required standards and specifications.Pack finishe

Youngstown, OH 44501 • (22.5 miles) • Full Time • 9/16/2026

Job Title: Process Engineering TechnicianJob DescriptionThe Process Engineering Technician supports manufacturing operations by developing, maintaining, and improving production processes, documentation, and system data. This role works closely with Engineering, Production, Planning, and Quality teams to ensure that manufacturing processes are accurate, efficient, and thoroughly documented. The position spends significant time on the production floor, supporting process improvements, validating manufacturing methods, and assisting with new product introductions and production launches.ResponsibilitiesCreate, maintain, and audit Bills of Materials (BOMs) and manufacturing routings within the ERP system to ensure accurate and reliable production data.Develop and update work instructions, pro

Youngstown, OH 44505 • (25.6 miles) • Full Time • 9/16/2026

We are currently seeking a skilled Extrusion Operator to join our production team. This role is responsible for operating and maintaining extrusion equipment used in the production of high-quality protein bar products.What You’ll Do:Set up and operate extrusion machineryMonitor production to ensure consistent product qualityPerform basic equipment troubleshooting and cleaningConduct quality checks and document production dataFollow food safety, GMP, and safety protocolsCommunicate issues promptly to supervisorsWhat We’re Looking For:Experience operating manufacturing or extrusion equipment preferredStrong mechanical aptitude and problem-solving skillsAttention to detail and quality focusAbility to work in a fast-paced production environmentStrong attendance and reliabilityWork Environment:

Alliance, OH • (5 miles) • Full Time • 9/16/2026

**Manual MachinistAlliance, OH 44601Salary: $27.50 - $38.50 per hour2nd Shift:| 3:30 PM – 2:00 AM (Monday – Thursday)Overtime: Available on FridaysJob ID: #26-00605About This Opportunity**Integrity Technical Services, Inc. is recruiting for a top-tier manufacturing facility in the Alliance / Youngstown, Ohio area for an experienced 2nd Shift Manual Machinist.ResponsibilitiesSet up and operate manual machine toolsspecifically Manual Mills, Lathes, Horizontal Boring Mills, and Planer Millsto manufacture heavy-duty precision components.Read, interpret, and work directly from complex mechanical blueprints, engineering drawings, and job travelers.Perform independent, complex machine setups, including selecting correct tooling, speeds, feeds, and fixtures for low-volume or custom-run parts.Utili

Warren, OH 44483 • (26.2 miles) • Full Time • 9/16/2026

Electrical Test Technician – Warren, OhioUnitek is seeking aFull-timeElectrical Test Technician to join our growing operations team in Warren, OH. This role involves hands-on testing of automotive electrical components such as connectors, terminals, splices, and fuse centers. The ideal candidate will have a strong foundation in electrical/electronic principles and a passion for precision and quality.Key ResponsibilitiesSet up and perform electrical tests per customer and OEM specifications.Prepare test samples and operate lab equipment including multimeters and oscilloscopes.Monitor test progress and ensure timely completion of milestones.Record and analyze test data; compile reports documenting results.Build and maintain test fixtures and lab equipment with minimal supervision.Maintain sa

Streetsboro, OH 44241 • (27.7 miles) • Full Time • 9/16/2026

Join Our Team as a Mechanical Assembly Technician!Location: Streetsboro,OhioPay: $20/hr, starting paySchedule: Mondaythrough Friday, 8:00 a.m.to5 p.m.Are you mechanically inclined and enjoy working with your hands? We’re looking for detail-oriented individuals to join our niche manufacturing shop, where custom-designed parts are assembled into high-quality products shipped worldwide.What You’ll Do:Perform general assembly of simple sub and main assemblies with engineering support and training to produce high-quality product to customer specificationsResponsible for quality, production standards, safety, scrap, and documentation recordsMust have some fastener and mechanical knowledge1st piece and in process inspection of components being manufactured to verify print and process specificatio

Twinsburg, OH • (35.4 miles) • Full Time • 9/16/2026

Entry Level Industrial Maintenance Technician – Start Your Technical Career with Service-Tech CorporationJob OverviewCompany: Service-Tech CorporationSalary/Pay Rate: $25 - $27 per hourLocation: Bedford, OH (Onsite)Job/Employment Type: Full TimeSchedule: 1st Shift with some 2nd Shifts and WeekendsProject Scope: Professional cleaning and maintenance of air ducts, kitchen hood systems, industrial ovens, building structures, and machineryMandatory Licences & Certifications: Drivers LicenseThe OpportunityYou will kickstart your technical career by delivering essential industrial cleaning and environmental maintenance services across diverse client facilities. You will gain hands-on expertise in operating specialized machinery and safety equipment while working alongside a supportive, growth-or

Bedford, OH 44146 • (41.3 miles) • Full Time • 9/16/2026

JOB DESCRIPTIONThe Mechatronics & Robotics Technician supports the Operations Maintenance team by maintaining, repairing, and installing material handling, automated packaging, and distribution equipment throughout the facility. This role focuses on preventative maintenance, troubleshooting electrical and mechanical systems, mentoring junior technicians, and supporting safe, efficient warehouse operations.Compensation: $28.08 per hour. Benefit packages for this role include: Benefit packages for this role may include healthcare insurance offerings and paid leave as provided by applicable law.REQUIRED SKILLS AND EXPERIENCE• High school diploma or equivalent • 2+ years of experience repairing material handling equipment (MHE) or automated conveyor systems and controls • 2+ years of experienc

Youngstown, OH 44512 • (19.9 miles) • Full Time • 9/15/2026

Here atSummer Garden Food Manufacturing, we are family-owned and operated. As an employer, we offer a safe, clean, and friendly work environment for our staff to grow. We frequently offer fun events, lunches, rewards, and other incentives to show appreciation to our employees for their dedication to our ever growing company.Position Summary:This position is responsible for receiving products timely and accurately, putting away products and rotating stock as needed. Receiving intercompany transfers and putting away that product. Replenishing picking locations, and assisting with cycle counting for inventory control, picking orders, and loading trucks. Other responsibilities include always maintaining a clean and safe working environment. This position reports to the Receiving Supervisor and

Warren, OH • (24.5 miles) • Full Time • 9/15/2026

Join the team behind iconic brands like Huggies®, Kleenex®, Cottonelle®, Scott®, Kotex®, Poise®, Depend®, and Kimberly-Clark Professional®. At Kimberly-Clark, it’s all here for youinnovation, growth, and the chance to make a real impact.At the KC Warren Plant, we are building more than a manufacturing facilitywe are building a High Performance Work System (HPWS) where employees are empowered to make decisions, solve problems, develop new skills, and directly influence business results.Our culture is built around shared leadership, continuous learning, accountability, and respect for people. Employees are expected to contribute ideas, challenge the status quo, and work collaboratively to improve safety, quality, reliability, and performance every day.POSITION SUMMARY:The purpose of this rol

Twinsburg, OH • (35.4 miles) • Full Time • 9/15/2026

The recycle sorter is responsible for sorting various recyclable materials from a fast-paced conveyor belt and placing them into a corresponding bin and/or chute.|1st Shift is 5am-3pm |About us: Kimble Company is locally owned and operated by the Kimble Family, with over 70 years of experience in the energy, materials, recycling, and solid waste industries. We are a dedicated team of seasoned professionals who care about our clients, the environment, safety, our families, and our co-workers. At Kimble we strive for perfection in everything that we do.Minimum Qualifications:Regularly stand for extended periods of time sorting through various materials on a fast-moving beltAble to bend, stoop, climb, reachAbility to lift/move up to 50 poundsWork outside or in an industrial environmentRespons

Bedford, OH 44146 • (41.3 miles) • Full Time • 9/15/2026

We are seeking a dependable and hardworking Sorter/Grinder to join our production team. Responsibilities include sorting plastic materials, operating grinding equipment, inspecting materials for quality, maintaining a clean and safe work area, and following all safety procedures. Prior manufacturing experience is helpful but not requiredwe are willing to train the right candidate.Qualifications:Reliable attendance and strong work ethicAbility to lift up to 50 lbs and stand for extended periodsAttention to detailAbility to work safely in a fast-paced environmentTeam-oriented attitudeCompetitive pay and opportunities for growth are available. Apply today to become part of our production team!

Cuyahoga Falls, OH 44221 • (28 miles) • Full Time • 9/15/2026

Prospect Mold and Die is a global leader in composite and metallic machining as well as tooling solutions serving the Aerospace and Defense, Building Products, Automotive markets and more. Prospect’s state-of-the-art equipment combined with our talented workforce gives us a competitive edge to meet the increasing needs of our customers. Prospect is proud to provide our product On Time, On Cost, On Service and On Spec. Prospect is ISO 9001, AS9100 certified.Prospect Mold is looking to hire an experienced Mold/Tool Bench Technician. The Mold/Tool Bench Technician is responsible for performing accurate bench related tasks, such as fitting mold/tool components, assembly fitting, hydraulic and water plumbing, installation of hot runner and limit switches. Work is coordinated through the applica

Streetsboro, OH • (27.7 miles) • Full Time • 9/14/2026

CNC Mandrel Bender OperatorCompany: Stainless WorksLocation: Streetsboro, OHJob Type: Full-TimeShift: First ShiftAbout UsAt Stainless Works, we manufacture premium, high-performance exhaust systems and headers right here in the USA. For over 30 years, our passion has been driving performance, precision, and craftsmanship. We pride ourselves on producing American-made products built from high-grade 304 Stainless Steel.We are looking for an experienced CNC Mandrel Bender Operator to join our production team in Streetsboro. If you take pride in producing clean, wrinkle-free bends on high-end automotive tubing, we want to hear from you!What You’ll DoSet Up & Operate: Prepare, adjust, and operate Horn Electric CNC Mandrel Benders to bend 1.5" to 3.5" OD 304 Stainless Steel tubing.Tooling & Die

Middlefield, OH • (37.4 miles) • Full Time • 9/14/2026

Basic Function:The Production Control Clerk will be responsible for performing clerical and physical tasks by shipping goods and receiving incoming shipments. They must prepare products for shipment, verify incoming shipments are received as ordered, and route them to the appropriate departments. Loads and unloads trucks, maintains their area, prepares shipping documents, and maintains records on all incoming and outgoing shipments.Specific duties include:Handle and manage incoming shipments of goods and materials received.Perform and execute unloading and storage or distribution of goods/materials received.Inspect and verify the condition of the goods/materials received.Count and verify received goods/materials.Communicate discrepancies in goods/materials received to the manager.Perform a

Leetonia, OH 44431 • (15 miles) • Full Time • 9/12/2026

Job Title: Machine Operator or Packer $18 / hourJob DescriptionThis role operates production equipment to cut aluminum extrusions to precise specifications, supports packaging operations as needed, and maintains a clean, safe, and organized work area in a modern manufacturing facility.ResponsibilitiesPlace aluminum extrusions on the cutting table and prepare materials for processing.Establish and set accurate cut saw lengths according to production specifications.Operate cutting and related machinery safely and efficiently during the shift.Perform visual inspections on materials and finished pieces to ensure quality standards.Assist in the packaging department as needed, including preparing products for shipment.Maintain a clean, organized, and safe work area at all times.Follow all produc

Canton, OH 44706-1933 • (19.6 miles) • Full Time • 9/12/2026

We are looking for an Operations Processor to support outsourced production activities and vendor coordination for a long-term contract opportunity in Canton, Ohio. This position focuses on keeping external processing work organized, on schedule, and aligned with operational needs by managing orders, timelines, and supplier communication. The ideal candidate brings strong attention to detail, experience working with purchase orders and inventory-related processes, and the ability to monitor multiple transactions in a manufacturing environment. Responsibilities: • Coordinate external manufacturing and vendor service work by organizing schedules, monitoring progress, and ensuring activities move forward according to operational timelines. • Build and maintain effective supplier relationships

Akron, OH • (28.2 miles) • Full Time • 9/12/2026

CAD Detailer | $21 per hour | 8:00 AM - 4:30 PM, Monday to FridayWhat Matters Most:Competitive pay of $21 per hourSchedule: 8:00 AM – 4:30 PM, Monday to FridayLocation: Akron, OhioOpportunity with career growth and stabilityWeekly pay with direct deposit or pay cardEligible to enroll in dental, vision, and medical insurance, as well as 401K, direct deposit, and our referral bonus programJob Description: As a CAD Detailer, you will provide support to the Production Engineering Department by creating fabrication, assembly drawings, and bills of materials for custom “Engineered to Order” mechanical HVAC equipment. This role requires using AutoCAD and other design programs to execute production engineering tasks such as wall details, small weld details, and unit base pans. You will collaborate

Solon, OH • (38.8 miles) • Full Time • 9/12/2026

Machinist OverviewThe Machinist is responsible for advanced setup, operation, and troubleshooting of machining equipment. This role independently resolves non-routine issues, ensures quality and efficiency, and identifies process improvements that enhance cost, delivery, and performance. The position also supports team development and may assist in training other machinists.Machinist ResponsibilitiesSet up, operate, and troubleshoot machining equipment safely and efficientlyPerform machine start-up, shutdown, and material loading processesMake tooling and fixture changes, adjustments, and setupsInspect parts visually and dimensionally to meet quality standardsComplete required documentation and production recordsIdentify and escalate machine malfunctions and part discrepanciesPreset toolin

Streetsboro, OH 44241 • (27.7 miles) • Full Time • 9/12/2026

A machining company in Streetsboro, Ohio is adding new machines and needs an experienced maintenance technician to keep them running.The work: the full scope of plant maintenance on a growing floor: 480-volt industrial electrical, gearbox rebuilds, hydraulic systems, scraping ways, and general and CNC machine maintenance. The owner wants someone who can also set up, edit and run the machines they maintain.You bring: several years of industrial maintenance covering electrical, hydraulics and gearboxes, hands-on CNC machine maintenance, and a stable work history. Someone who can cover only part of this scope is not the right fit.A long-term home: the shop teaches its own methods and wants to keep the people it trains. The right person is looking for a place to finish their career, not a step

Alliance, OH 44601 • (5.4 miles) • Full Time • 9/11/2026

Nos alegra que ests aqu. Pinsalo: t y nosotros? Parece que podramos ser una pareja perfecta en el paraso de la carne. Si ests aqu por:Papas fritas rizadas con descuento (y todos los artculos de nuestro men, de hecho)Horario flexibleComidas gratuitas por turno*La mejor capacitacin en su clase y aprendizaje continuoOportunidades de progresoTiempo libre remunerado*Plan de jubilacin 401(k)*Beneficios de matrcula*Mdico, dental y de la vista*Campeones de la esperanza*Programa de recomendacin de efectivoHerramienta de apoyo para el bienestar en el viajePrograma de descuentos PerkSpotPrograma de reconocimientoProgramas de calzado antideslizanteParticipacin comunitaria y caritativaPrograma de subvenciones Encendiendo sueosConcursos de entrenamientoBueno, ests en el lugar correcto. Tambin ests en el

Solon, OH • (38.8 miles) • Full Time • 9/11/2026

Plant Manager – Precision CNC ManufacturingLocation: Jerpbak Bayless-Solon OhioJob Type: Full-TimeJob DescriptionWe are seeking an experienced Plant Manager to lead operations at a high-precision CNC manufacturing facility. Our shop specializes in complex multi-axis CNC machining with extremely tight tolerances in a fast-paced job shop environment. The ideal candidate will have strong leadership skills, deep knowledge of CNC machining processes, and proven experience managing production, quality, and personnel in a precision manufacturing environment. This role is responsible for overseeing daily operations, driving operational efficiency, maintaining strict quality standards, and leading a team of machinists, programmers, and production staff.Key Responsibilities• Oversee daily plant oper

Akron, OH • (28.2 miles) • Full Time • 9/10/2026

Are you a skilled mechanic looking for a career change? Whether you enjoy tinkering in your own garage or work professionally on cars, we are interested in talking to you about joining our team as a Mechanical Assembler.rpGatta is a growing company who designs and builds custom manufacturing machinery for the Automotive, Defense, Tire and Off-Road Heavy Equipment Industries. We are looking for a highly self-motivated Mechanical Assembler to fill this challenging and interesting position.rpGatta specialized in heavily engineered Robotic Automation that helps our customers build their product. We have designed and built numerous vision guided robots working on F-15 and C-130 aircraft along with other types of equipment working on the F-22 Raptor. We've shipped large format (20' x 40' x 15')

Aurora, OH 44202 • (32 miles) • Full Time • 9/10/2026

*HAVE TO BE OKAY WITH TRAVELOverviewWorks directly with customers to define functional requirements and design, configure, commission and qualify control systems.ResponsibilitiesOwns and leads projects with small to medium sized teams for projects executed in different platforms.Assists Project Manager in identifying changes in project scope and developing change orders.Demonstrates an understanding of the project scope and schedule.Translates functional requirements to system configuration.Designs control systems’ network architectures and control strategies.Serves as a technical contact for customers.Has a firm competency of one or more control systems platforms or industrial processes.Adapts to new technologies by applying learned concepts and functionality.Day to Day Activities:Interfa

Richfield, OH 44286 • (38.8 miles) • Full Time • 9/10/2026

We are HIRING PERM ASSEMBLERS for our Richfield facilities!Winar Connection, Inc. builds wire harness cables (custom) and we are looking for good mechanical skills, and electrical skills are a big plus! Soldering skills a big plus!Duties:Cut, strip, crimp, heat shrink, and follow both verbal and written directions.Lift 50-75 lbs.Standing and sitting through the shift.1st and 2nd shifts available!1st shift 6:30am to 3:00pm Mon-Friday (no weekends)2nd shift 3:00pm to 1:30am Mon-Thursday )(3 day weekends every week)2nd shift offers 15% shift differential ontop of pay rate.We offer a great benefits package, weekly AND monthly bonuses!Please send an updated resume today to us to be considered!\nCompany DescriptionOur company specializes in electrical connectors, cable ties, heat shrink products

Monaca, PA 15061 • (41.4 miles) • Full Time • 9/9/2026

Rotating Equipment InspectorWe are pleased to recruit for a company whose corporate purpose is to create chemistry for a sustainable future and has been doing so for 150 years. Their portfolio ranges from chemicals, plastics, performance products and crop protection products to oil and gas. Their products and solutions contribute to conserving resources, ensuring nutrition and improving quality of life. Our client is expanding and seeking a Rotating Equipment Inspector in Monaca, PA.Responsibilities:· The Rotating Equipment Inspector works in conjunction with the Rotating Equipment Area Engineer to provide Rotating Equipment assurance to the Area Production Team.· The Inspector is responsible for first point of contact for troubleshooting of rotating equipment issues from maintenance and o

Stow, OH 44224 • (28 miles) • Full Time • 9/9/2026

AutoCAD Designer – Inground Swimming Pool DesignPremier 1 Pool & Patio is seeking an experienced AutoCAD Designerto join our team and assist with the design and drafting of custom inground swimming pools and outdoor living projects.ResponsibilitiesCreate accurate 2D and 3D AutoCAD drawings for inground swimming pool projectsDevelop construction plans, site plans, layouts, and detailed drawingsIncorporate measurements, elevations, property lines, setbacks, and existing site conditionsWork closely with our sales, design, and construction teamsRevise drawings based on customer and field requirementsPrepare professional plans for permitting and constructionMaintain organized project files and drawing revisionsQualificationsProficiency inAutoCADExperience with residential construction, landscap

Chagrin Falls, OH 44023 • (35.1 miles) • Full Time • 9/9/2026

Senior Production ManagerLead Today. Grow Into a Plant Manager Role Tomorrow.Are you an accomplished production leader ready to take the next major step in your manufacturing career?Our client is seeking a Senior Production Manager to play a critical leadership role at its manufacturing operation in Chagrin Falls, Ohio. This is an outstanding opportunity for a hands-on, results-driven leader with a strong background in production leadership, Continuous Improvement, operational excellence, safety, quality, and team development.Even more compelling, this position is designed to provide a clear path toward advancement. The successful candidate will have the opportunity to progress into a Plant Manager position within approximately 18 to 24 months.

Bedford, OH 44146 • (41.3 miles) • Full Time • 9/9/2026

Summary: The Product Assembler is a skilled manufacturing position responsible for assembling pedestal booms, hydraulic power units, and other company products according to engineering specifications, drawings, work instructions, and quality standards. This position requires a strong mechanical aptitude, attention to detail, and the ability to independently perform complex assembly operations. This position consistently works within tight deadlines, requiring extreme motivation and high work ethic.Essential Duties and Responsibilities:Assemble pedestal booms and hydraulic power units according to engineering drawings, specifications, bills of materials, and established work instructions.Perform mechanical and hydraulic assembly, including installation and connection of components, fittings

Akron, OH • (28.2 miles) • Full Time • 9/8/2026

You will be the Mechanical Assembly Technician for our Indication line of products used in the Aerospace markets.What you will be doing:As a Mechanical Assembly Technician you will be required to work independently with limited support and be able to perform in a 'Build To Print' manufacturing environment utilizing provided manufacturing routings and engineering drawings to perform the tasks required.The successful candidate will possess the knowledge, mechanical aptitude and skills required to plan and safely execute all tasks necessary to assemble complex, high precision hardware, in a high mix low volume shop.Working with our Engineering department to continually improve the processes.Candidate must have experience with:Utilization of basic hand tools, soldering equipment.Must be able t

Minerva, OH 44657 • (12.8 miles) • Full Time • 9/7/2026

Get Paid to Learn a Skilled TradeLooking for more than just another factory job?Join a leading automotive manufacturer in Minerva, Ohio and get paid while learning CNC machining, a high-demand skilled trade with opportunities for advancement, apprenticeships, and continued education.Why This Opportunity Stands Out No CNC Experience Required Paid On-the-Job Training Paid Apprenticeship Opportunities Tuition Assistance Available Earn $1,000+ Weekly with Available Overtime & Doubletime Temp-to-Hire After 520 Hours Health, Dental & Vision Benefits Available Clean, Modern, Air-Conditioned Facility Career Advancement OpportunitiesWhat You'll DoLearn CNC machine operation through paid trainingLoad and unload partsPerform quality inspectionsFollow work instructions and safety proceduresBuild valua

Solon, OH 44139 • (38.8 miles) • Full Time • 9/7/2026

Job SummaryA small Solon-area firm seeks a meticulous and competent person with experience in physics, electronics, or semiconductor fabrication. Applicant’s primary duty is to fabricate components using an electron beam deposition system and lithography. Additionally, they will inspect components at different stages of production, monitor the stability of the components over time, and log manufacturing process data. On-the-job training will be provided.The working location is on-site at Solon, OH. Working time flexible but preferably M-F 9AM - 5PM.Preferred Skills and QualificationsEducation: High School Graduate, Vocational (Associate, Journeyman or Trade school is preferred). Bachelor’s Degree optional.Experience: Minimum 1 year in manufacturing or research. Vacuum system, clean-room ex

Stow, OH • (27.8 miles) • Full Time • 9/6/2026

Principal Responsibilities:Core Responsibilities:Sets up and operates conventional and special purpose machines to fabricate metallic partsApplies knowledge of machine shop theory and procedures, shop mathematics, machinability of materials and layout techniquesStudies blueprints, sketches, drawings, manuals, specifications or sample part to determine dimensions and tolerances of finished work piece, sequence of operations and set up requirementsMeasures, marks and scribes dimensions and reference points on material or work piece as guides for subsequent machiningSelects, aligns and secures holding fixtures, cutting tools, attachments, accessories and materials on machine, such as saws, mills, grinding, burning and drilling equipmentCalculates and sets controls to regulate machining factor