McMinnville, OR 97128 • (22.5 miles) • Full Time • 9/22/2026

Repairs, installs, and performs preventive maintenance on all production equipment to ensure that such equipment is always in good operable condition. Uses electrical and mechanical expertise to trouble shoot, repair, install and perform preventive and interactive maintenance on all production equipment accessories to ensure that all equipment is always in good operable condition.Primary Responsibilities:1. Install, operates, maintains, checks, and trouble-shoots all types of A/C and D/C electrical equipment. Install, trouble-shoot, and repair solid state and electronic equipment as well as mechanical equipment.2. Uses safe working practices and always reports/repairs any hazard conditions.3. Inspects machines, takes any required test, and completed “all” reports and paperwork as required.

Newberg, OR 97132 • (29.3 miles) • Full Time • 9/22/2026

Manufacturing EngineerJob Summary The Manufacturing Engineer is responsible for improving machining and manufacturing processes to drive quality, safety, delivery, and cost performance. This role provides hands-on production support, resolves manufacturing issues, leads continuous improvement initiatives, supports new product introduction (NPI), and collaborates across production, quality, and engineering teams to optimize operations.Key Responsibilities Provide technical support for production issues including quality concerns, machine downtime, tooling challenges, and part shortages.Analyze manufacturing data to develop and optimize ERP routings, cycle times, setup standards, and fabrication processes.Create and maintain manufacturing documentation, work instructions, process standards,

Portland, OR 97222 • (43.2 miles) • Full Time • 9/22/2026

Description:4/10 work schedule Monday - ThursdayTemp to hire1st shift: 6am - 4:30pmPay rate: $20 - $22/hrSummary:The Electrical Assembler II, under moderate guidance, will perform processes to manufacture a finished product, using small hand tools and soldering skills per manufacturing instructions in the cell, in accordance with company policy and safety procedures. May assist in training Assembler I associates.o Performs a variety of routine mechanical and/or electromechanical assembly operations in accordance with company instructions and procedureso Conducts inspections of own and /or other associates work to insure correctness in accordance with company and /or customer drawingo Prepares lead wires,o Performs advanced test functions.o Shapes, connects and installs coils, solder, braze

Clackamas, OR 97015 • (43.8 miles) • Full Time • 9/22/2026

Miatech is looking for a dependable Manufacturer in the Clackamas area to assemble, test, and prepare our perishable equipment for shipment.Responsibilities:Light assembly of equipment.Skills:Good mechanical aptitude.Requirements:No prior experience necessary; training provided for candidates with suitable aptitudes.Ability to lift up to 75 pounds.Benefits:401(k) retirement planMedical/Dental insurancePaid vacationPaid sick leaveJob Type: Full-timeStarting Salary: $41,500 annually plus monthly bonus program.Schedule:Working hours 7:30 AM – 5 PMMonday to FridayJob Location: 9480 SE Lawnfield Rd. Clackamas, OR 97015

Aumsville, OR 97325 • (11.6 miles) • Full Time • 9/20/2026

Job Title: General Production WorkerJob DescriptionThis role supports daily production operations in a food manufacturing environment by monitoring product quality throughout the production process and helping ensure all products meet company standards before shipment. You work closely with production teams to inspect materials, perform quality checks, identify defects, and maintain compliance with food safety, Good Manufacturing Practices (GMPs), and standard operating procedures.ResponsibilitiesMonitor production lines and inspect products at various stages of the manufacturing process.Conduct quality checks on raw materials, in-process products, and finished goods to ensure they meet established standards.Identify, document, and report quality issues, defects, or non-conformances to pro

Canby, OR • (31.2 miles) • Full Time • 9/20/2026

Cascade Engineering Technologies- Senior CNC ProgrammerPay: $75,000- $110,000Salary Exempt position- Compensation package will be determined based on relevant CNC programming experience, aerospace manufacturing background, technical expertise, and overall qualifications.Location: Canby, OregonBuild Complex Aerospace Parts That Matter.Cascade Engineering Technologies (CET) is hiring an experienced CNC Programmer to help drive production of precision aerospace components supporting defense and commercial aircraft programs.If you enjoy solving machining challenges, programming complex parts, improving processes, and seeing your work hit the floor quicklythis is a role where you can make a real impact.Were looking for someone who takes pride in precision, efficiency, and continuous improvement

Stayton, OR 97383 • (18.5 miles) • Full Time • 9/19/2026

THE OPPORTUNITYWe're not looking for someone who still needs direction. We're looking for someone who can take a set of plans, walk a job site, and get it done right and who's ready to help shape the next generation of sheet metal craftsmen while they're at it.Santiam Heating & Sheet Metal has spent 30 years building a reputation for unmatched craftsmanship and integrity across the Pacific Northwest. Our Sheet Metal division specializes in custom metal fabrication and installation roofing, siding, flashing, gutters, downspouts, and decorative exterior metalwork on commercial and residential buildings. This is where the trades meet the art of metal, and a journeyman is the one who sets the standard for how it's done.WHAT THIS ROLE ISWe're looking for a skilled Sheet Metal Journeyman with at

Corvallis, OR • (25.2 miles) • Full Time • 9/18/2026

Job Title:Wafer Fab Process EngineerPay Rate:To be negotiatedExpected Weekly Hours:40Expected Start Date: 02 Nov 26Position SummaryThis position is responsible for supporting various processes used in a silicon wafer fab environment. The candidate will utilize their understanding of fabrication processes and product development methodologies to achieve the yield goals of assigned toolset/process step(s). The wafer fab process engineer will collaborate with product R&D teams to make decisions on process quality based on data and statistical analysis.Duties and ResponsibilitiesDevelop fundamental understanding of fabrication processes and product development methodologies against target yieldsTake ownership for an assigned toolset or process step(s) to optimize process quality controls vs co

Hillsboro, OR • (43.7 miles) • Full Time • 9/18/2026

Job Title: Manufacturing Technician ILocation: Hillsboro, ORDuration: Contract - 11 monthsPay Range: $21.00/hr - $23.10/hr (W2)Job ID: 409877About BCforwardBCforward is a leading global IT consulting and workforce solutions firm providing services and support to Fortune 500 and government clients. Founded in 1998, BCforward has grown with our customers needs into a full-service business solutions provider. With delivery centers and offices across North America and India, we take pride in building long-term relationships and delivering excellence through innovation, collaboration, and integrity.Job DescriptionWe are seeking a Manufacturing Technician I to join our dynamic team. The ideal candidate will have strong experience in sterile product filling, inspection, and packaging within cGMP

Hillsboro, OR • (43.7 miles) • Full Time • 9/18/2026

Job Title: Manufacturing Technician ILocation: Hillsboro, OR 97124Employment Type: W2 Contract – 12 Months with Possibility for ExtensionsPay Rate: $21.00–$23.10/hour – Determined based on experience (Paid Weekly)Shift: Swing Shift – Monday–Friday, 3:00 PM–1:30 AMWork Model: Fully OnsiteBenefits: Medical, Dental, Vision, and Life InsuranceNote: This is a W2 only role C2C and C2H will not be considered.Role OverviewBEPC is seeking a Manufacturing Technician I to support our customer’s sterile pharmaceutical manufacturing operations in Hillsboro, OR.This hands-on role supports the filling, inspection, and packaging of sterile pharmaceutical products within a highly automated production and packaging facility. The technician will operate, clean, set up, troubleshoot, and maintain manufacturin

Beaverton, OR 97005 • (42.7 miles) • Full Time • 9/17/2026

Compensation$125K-175K OTE (base + commissions + spiffs)Territory: either Portland, OR -or- Seattle, WASchedule:Monday-Friday 8am-5pmKey Requirements:5+years of successful B2B Outside Sales Experience required3+years of Production Print Sales Experience requiredCopier Industry Experience strongly preferredJob SummaryThe Production Print Specialist (PPS) is responsible for growing CNW’s Production Print market share by winning net-new business and expanding existing accounts, both through direct sales and as an overlay specialist supporting Strategic and Major Account reps.The PPS serves as a subject matter expert in Production Print solutions, driving revenue, gross profit and solution adoption across hardware, software, integrated finishing solutions, including wide, grand, and commercial

Portland, OR 97225 • (43.9 miles) • Full Time • 9/17/2026

LHH is seeking a Quality Engineer to join our client's team in a full-time role. This position can sit in several different US locations. About the Role As our client's first dedicated QA hire, you will build our automated test coverage from the ground up, run usability and performance testing, and set the quality practices the product development team works to. That means choosing tooling and standards yourself, and working embedded with the team rather than as a gate at the end. Salary & Benefits $90k to $110k annual base salaryMedical, dental, and vision insurance401(k) plan w/match (100% vested immediately)12 days of PTO + 10 paid holidays to start (plus additional days off around 4th of July, Thanksgiving, and a week off between Christmas & New Year)Home office budget Job Responsibil

Newberg, OR 97132 • (29.3 miles) • Full Time • 9/16/2026

Job SummaryThe Food Manufacturing Operator is responsible for operating production equipment, preparing ingredients, packaging finished products, and ensuring food safety and quality standards are met. This role supports daily manufacturing operations by following production schedules, maintaining a clean work environment, and ensuring products are produced efficiently and safely.ResponsibilitiesOperate food processing and packaging equipment according to established procedures.Follow production schedules and work orders to meet daily output goals.Measure, weigh, mix, and prepare ingredients as required.Monitor product quality and report any issues or deviations.Inspect products and packaging to ensure compliance with quality standards.Perform basic equipment setup, adjustments, and cleani

Lebanon, OR • (26.8 miles) • Full Time • 9/16/2026

DescriptionOur Manufacturing team is committed to delivering high-quality products through operational excellence, safety, and continuous improvement. The Swing Shift Coating Line Operator is responsible for operating and monitoringcoating line equipment to ensure safe, efficient, and accurate production of coated seed products. This role focuses on machine operation, maintaining production flow, executing production blendsheets accurately, performing quality checks, and supporting daily operational readiness. This position will begin on day shift for training before transitioning to a swing shift schedule.Shift Details: Initial day shift training followed by swing shift schedule based on production needs.KEY RESPONSIBILITIESOperate coating line machinery safely and efficiently to meet dai

Portland, OR 97223 • (39.8 miles) • Full Time • 9/15/2026

Summary:The Finisher is responsible for preparing, painting, and finishing cabinets to achieve high-quality, durable, and visually consistent results.Hours: Tuesday - Friday 6am - 4:30pmPay: $24 - $25 / hourEssential Duties and Responsibilities:Prepare cabinet surfaces by sanding, cleaning, and filling imperfectionsApply primers, paints, stains, and sealers using spray equipment or hand toolsMatch colors, stains, and finishes to specifications or customer requirementsInspect surfaces between coats and perform touch-ups as neededMaintain spray booths, tools, and finishing equipmentFollow proper drying, curing, and handling proceduresFollow safety guidelines for handling chemicals, paints, and equipmentKeep work area clean and organizedEducation and Experience:Associate’s degree or equivalen

Beaverton, OR 97008 • (40.7 miles) • Full Time • 9/13/2026

Position Description:We are currently looking for someone who is organized, detail-oriented, efficient, and experienced in industrial automation electrical control systems to help us grow our business. The electrical controls panel builder is primarily a production role with some onsite work. Our panel builders construct a wide variety of custom automation control systems, and must demonstrate mastery of industrial control wiring, panel fabrication and assembly. While repeat production does occur, the builder must also be able to assume responsibility for creating one-of-a-kind control systems from schematic drawings, and a thorough understanding of best-practices and UL508a requirements. Individual initiative, a dedication to quality and a sense of pride in one’s workmanship is critical.

Beaverton, OR 97003 • (42.7 miles) • Full Time • 9/11/2026

TEKsystems is partnering with a family-owned Oregon manufacturer to hire a Technical Support Specialist. This is a long term opportunity to join their team, they also offer a Hybrid work Schedule. This position is an excellent fit for someone with strong technical aptitude who enjoys troubleshooting electrical and mechanical systems, working directly with customers, and solving real-world equipment issues.We're especially interested in candidates with Customer Service AND electronics, engineering, STEM, manufacturing, laboratory equipment, or technical project experience. Whether you've gained your experience through work, school, personal projects, or hands-on hobbies, this role offers an opportunity to apply your technical skills in a customer-facing environment while continuing to devel

Hillsboro, OR • (43.7 miles) • Full Time • 9/11/2026

Job DescriptionThe Process Engineering Technician position is located in Hillsboro, Oregon. The position's main objective is to support the process engineering and cleanroom facilities through various “hands on” tasks and operation of semiconductor manufacturing equipment. The candidate must be able to follow detailed instructions and exhibit a strong mechanical aptitude. The technician should be able to independently perform and understand routine tasks, and capable of providing frequent status updates to the process engineering team. Continued training may be given to develop specific skills, knowledge, and techniques. The technician is interfacing with and developing relationships with co-workers and managers.PRIMARY RESPONSIBILITIES· Partners with Process Engineering team to achieve op

Hillsboro, OR • (43.7 miles) • Full Time • 9/11/2026

Location: Onsite, Hillsboro, ORPosition SummaryStenTech is seeking a dependable and detail-oriented Quality Control Inspector for our Swing Shift (3:15 p.m. – 11:45 p.m.) at our Hillsboro, OR facility. This position plays a critical role in ensuring our products meet customer specifications and quality standards. The ideal candidate thrives in a fast-paced environment, has a keen eye for detail, and enjoys hands-on work inspecting precision metal components.Inspect incoming, in-process, first article (first part buyoff), finished, and outgoing metal parts to verify compliance with customer specifications, quality standards, and production requirements.Perform incoming inspections of supplier materials and final inspections of finished products before shipment.Review inspection paperwork, w

Harrisburg, OR 97446 • (43.8 miles) • Full Time • 9/10/2026

We are currently hiring a dependable and hardworking Packaging Associate for a busy wood prefinishing company. This position involves packaging finished wood products, preparing orders for shipment, and assisting with general warehouse duties in a production environment.Forklift experience is a plus, but not required.Responsibilities:Package and prepare finished wood products for shippingStack, wrap, label, and organize materialsAssist with loading and unloading productsMaintain a clean and organized work areaFollow safety procedures and production guidelinesSupport warehouse and production teams as neededOperate a forklift safely (if experienced/certified)Qualifications:Reliable and dependable attendanceAbility to lift and move materials throughout the shiftComfortable working in a wareho

Tualatin, OR 97062 • (35.5 miles) • Full Time • 9/9/2026

THIS IS A 90-DAY TEMPORARY TO HIRE POSITIONSeeking Swing Shift and Night ShiftSwing Shift: Monday - Friday 2:00pm - 10:30pmNight Shift: Sunday Night - Friday morning 10:00pm-6:30amPOSITION PURPOSEWe are seeking a motivated and detail-oriented Production Manufacturing Technician to join our dynamic manufacturing team. In this role, you will play a vital part in ensuring the efficient and compliant production of chemical abrasive products from start to finish. Your expertise will help maintain high standards of safety, quality, and regulatory compliance while supporting continuous improvement initiatives. This position offers an exciting opportunity to work in a fast-paced technical environment where your skills and manufacturing knowledge will directly contribute to delivering products that

Sherwood, OR • (33.4 miles) • Full Time • 9/7/2026

Madden Industrial Craftsmen is seeking a CNC Maintenance Technician for a long-term role with an organization located in Sherwood, OR. The position includes preventative maintenance, troubleshooting and repair of both CNC and manual mills and lathes along with other miscellaneous equipment used in the support of Production. This opportunity is a weekend shift, Friday through Monday. Pay: $34-$45/hrCNC Maintenance Technician Responsibilities:Advanced troubleshooting and repair of electronic circuitry including wiring, motor controls and sensorsDiagnose, adjust, repair, or replace non-functioning hydraulic and pneumatic componentsDiagnose, adjust, repair, or replace non-functioning machine components and control instrumentsRead and interpret electrical, hydraulic and pneumatic schematicsReco

Lake Oswego, OR 97035 • (39 miles) • Full Time • 9/5/2026

Position DescriptionJob Title: Sr. Manufacturing Quality EngineerJob Location: Lake Oswego, OR (Hybrid)Position Status: Full-timeReports to: Sr. Director, Manufacturing Operations & QualityDepartment: QualityFLSA Status: ExemptAbout the JobAre you passionate about aviation, technology, product quality, and manufacturing excellence? Do you thrive in a hands-on, cross-functional environment where quality systems, supplier performance, repair operations, and production execution all come together? Lightspeed Aviation is seeking a Sr. Manufacturing Quality Engineer to support premium aviation headset products and service operations.Position Overview:The position owns, under direction of Sr. Director Manufacturing Operations & Quality, product quality assurance across domestic and international

Wilsonville, OR 97070 • (31.6 miles) • Full Time • 9/5/2026

Job Posting: Special Grind Area (3rd Shift)Company: Kelly Services Location: Wilsonville, OR Pay Rate: $21.85/hr Schedule: 3rd shift!3rd Shift: Monday to Friday, 9:00pm to 5:30amInitial Training: Day shift for at least 2 weeks (Monday to Friday, 7:00am to 2:30pm)Essential Duties and ResponsibilitiesFollow instructions to produce in-spec productUse a microscope effectivelyUnderstand and work with the metric systemCommunicate clearly, both verbally and in writingWork in different areas as neededPerform related duties as assigned by supervisorMaintain compliance with all company policies and proceduresRun and oversee multiple machinesPhysical RequirementsSafely and successfully perform essential job functionsMeet standards of attendance and punctualityWork extended hours as requested (OT)Work

Canby, OR • (31.2 miles) • Full Time • 9/4/2026

Are you ready to take the next step from skilled Installer to jobsite leader? At Groundworks, North America’s leader in foundation solutions, our CoForeman are driven professionals who are ready to build their skills to grow into a Foreman position. Working sidebyside with an experienced Foreman, you’ll learn how to lead crews, manage daily jobsite operations, and uphold our standards for quality, safety, and customer satisfaction. With handson leadership training, industry-leading certification program, and a clear path to advancement, this role is built for those who want to develop their leadership skills while continuing to do impactful work in the field.The Co-Foreman is a leader as well as a contributor on our crew and an integral part of our success. The Co-Foreman coordinates tasks

Tualatin, OR 97062 • (35.5 miles) • Full Time • 9/4/2026

Description: Ascentec is hiring an entry-level shop helper at our Tualatin, Oregon location! This is an excellent opportunity to gain hands-on training in the Precision Machining Industry. In this role, you will work in our shop and help with staging material, custodial duties (janitorial work), filling coolants – oils/lubricants, deburring, polishing, inspecting parts and learning to operate CNC machines, CMM’s, Manual Parts Inspection, Assembly and Parts Finishing.This position is onsite (not remote/not hybrid) and is not eligible for Visa sponsorship or transfer of Visa sponsorship.Requirements: JOB RESPONSIBILITIES: To include but not limited to the following:• Training and use of Forklift, Pallet Jacks• Load/unload materials and products• Assist with maintenance on machines within the

Hillsboro, OR 97123 • (37.7 miles) • Full Time • 9/4/2026

Benefits/PerksCompetitive CompensationPaid Time OffCareer Growth OpportunitiesJob SummaryWe are seeking a skilled Signage Production Manager to join our team. In this role, you will be the primary person responsible for steps in the sign-making process, including laminator operation, substrate cutting, weeding, application of graphics in office and onsite at client locations. The idea candidate is organized, self-sufficient, good working in a team setting and independently.ResponsibilitiesPrepare base materials for vinyl applicationWeed/tape/prepare vinyl for applicationApply vinyl signs to base material and on site locationsDrive to locations as well as possible delivery of signage.Remain up-to-date on best practices and techniques in sign-makingQualificationsHigh school diploma/GEDValid

Molalla, OR 97038 • (28.2 miles) • Full Time • 9/3/2026

Quanexis looking for aProduction Associate - part timeto join our team located inMolalla, Oregon.Quanex Custom Components, a manufacturer of cabinet doors, is seeking people with strong work ethic to become part of our manufacturing team. The Production Associate will perform a variety of tasks related to the manufacturing of cabinet doors which could include sanding, using woodworking machinery, packaging, and many more.What’s attractive about the Production Associate position?An opportunity to be a part of a local company with longevity, while having the full support and benefits of an international corporationPay: $18.50 - $21.39 an hour, depending on experienceShifts Available: Flexible - up to 5 hours per day, Monday - FridayWhat Success Looks Like:Receives direction from the supervis

Newberg, OR 97132 • (29.3 miles) • Full Time • 9/2/2026

Position Summary:The Chair Assembler I supports the production team by assembling components used in dental chair manufacturing. This position involves light mechanical assembly, inspecting parts, using basic hand tools, and following established work instructions whilemaintainingquality and productivity standards.Primary Duties and Responsibilities:Assemble, position, and align parts and components according to established work instructions.Use basic hand tools such as screwdrivers, pliers, and other assembly equipment.Inspect parts and components for defects, damage, or quality concerns.Follow established production and safety procedures.Properly care for assigned tools/equipment and complete required documentation accurately.Maintain workstation materials,assistwith inventory counts, an

Beaverton, OR • (41.6 miles) • Full Time • 8/29/2026

MECHANICAL ENGINEERCEME Americas is part of a multinational Italian group, CEME SPA, with its headquarters in Northern Italy and manufacturing locations in five countries: Italy, Ireland, Hungary, China, Mexico, and the United States. The Group is owned by a Private Equity Fund. CEME is a global leader in developing solutions for a broad range of industrial applications. By combining innovative manufacturing processes with consultative solutions, we support the world's most renowned brands.The Mechanical Engineer supports the design and development of new and existing pump products for fluidic systems. The Mechanical Engineer assumes responsibility for engineering projects and applies sound engineering judgment, leadership, and mechanical and hydraulic principles to develop solutions and p

McMinnville, OR 97128 • (22.5 miles) • Full Time • 8/26/2026

Job Description: Repair PlannerThe Auto Collision Repair Planner is a skilled hourly position requiring an experienced professional knowledge in all aspects of repair planning. This role involves accurately assessing and estimating the costs associated with disassembling and repairing vehicles involved in collisions. Working closely with Technicians in the shop, the Repair Planner ensures precise damage assessment during the disassembly phase. This position demands a strong understanding of the auto repair process, excellent analytical skills, and the ability to collaborate effectively with all team members.FLSA Status:Non-ExemptWork Location:Full Time Hourly/CommissionJob Duties/Responsibilities:Perform all assigned responsibilities according to the Company Standard Operating Procedures.G

Tualatin, OR 97062 • (35.5 miles) • Full Time • 9/6/2026

OverviewAt KeHE, we’re obsessed with creating solutions, unboxing potential, and serving others – and it all starts with you. As an employee-owned distributor of natural and organic, specialty, and fresh products, we’re committed to making a positive impact and scaling our success together. With a culture that fosters development and opportunity, you’ll be embarking on a career that’s moving forward. When you join KeHE, you’re becoming part of a team that is a force for good.ResponsibilitiesThe Cut and Wrap associate cuts, packages and repackage products to customer specifications. This includes cutting and dispensing product and repackaging and labeling goods to be sent out to the customers. Soft and hard cheeses, olives and nuts are taken from the vendors’ containers and re-sized or pack

Clackamas, OR • (43.2 miles) • Full Time • 9/2/2026

Description: Join Our Team Pacific Architectural Wood Products is seeking an experienced Stain Mixing Specialist to join our production team. This hands-on role is ideal for someone with a strong understanding of stain mixing, color matching, wood finishing, and quality control. The successful candidate will play a critical role in ensuring custom stain colors meet customer expectations while supporting efficient production operations.If you have a keen eye for color, experience working with stains and coatings, and enjoy working in a manufacturing environment, we'd like to hear from you.Position Summary The Stain Mixing Specialist is responsible for accurately mixing stains and coatings to achieve specific colors, finishes, and consistencies for customer projects. This position requires k

Corvallis, OR 97330 • (21 miles) • Full Time • 9/1/2026

Description: About UsMiCROTEC is a high-tech company and global leader in wood scanning solutions. Founded in 1980 and headquartered in Bressanone, Italy, MiCROTEC has offices in Sweden, Germany, Finland, Canada, and the United States. We partner with some of the world’s largest sawmills and wood processing companies to help optimize production, improve product value, and support more sustainable wood utilization.Our team is driven by innovation and a passion for advancing the wood processing industry through cutting-edge technologies including CT (Computed Tomography), X-ray, visual scanning, deep learning, artificial intelligence, and stereoscopic imaging.As the world’s leading provider of wood scanning solutions, we offer meaningful opportunities for professional growth and development

Tualatin, OR 97062 • (35.5 miles) • Full Time • 9/12/2026

FOOD PRODUCTION FLOATER | $18/HR | DAY/NIGHT SHIFT | TUALATIN, ORLocal food production facility is hiringproduction floatersto join their team! This is a fast-paced, hands-on role in a manufacturing environment. Ideal for someone withfood production or warehouse experiencewho’s reliable and ready for consistent hours.Mandatory overtime great opportunity to earn extra.Project-based role with potential for long-term hire. Spanish only speakers are welcome to apply! Las personas que solo hablan espaol son bienvenidas a aplicar!JOB DUTIES INCLUDE:Assist with food production including mixing, baking, and packagingOperate and monitor equipment such as ovens, mixers, and conveyorsFloat between departments based on production needsHelp maintain production flow to meet daily goalsFollow food safety

Hillsboro, OR • (43.7 miles) • Full Time • 9/22/2026

JOB TITLE: Operations QAQC Cleanroom Technician IIDEPARTMENT: OperationsREPORTS TO: Operations ManagerSUMMARY: Operations QAQC Cleanroom Techniciansare responsible for performing final clean, drying, biking, inspecting, testing, and packagingparts and assemblies received from high-tech manufacturing customers after being fed into the cleanroom by other Operations Technicians. Operations QAQC Cleanroom Technicians are required to complete training, understand, and follow written procedures and demonstrate ability to inspect, reassemble, test and package customer parts and equipment in a critically controlled cleanroom work environment. Operations QAQC Cleanroom Technicians are required to communicate any part defects or abnormalities observed to the Supervisor and Production Manager by issu

Hillsboro, OR • (43.7 miles) • Full Time • 9/22/2026

Qualifications: Hybrid/Local on-site position. Regular site visits to verify existing field conditions and to ensure the alignment of the design implementation process with the projects observational reports and specifications. Coordinating effectively with project engineers, project coordinators, engineering coordinators, construction trades, and other team members to ensure that the design/as-built reflects the projects objectives. Providing comprehensive 2D/REVIT drawing packages that are clear, accurate, and follow the site design standards. Verifying, updating, and drafting comprehensive chemical/mechanical plans including piping layout, equipment layout, schedules, and P&IDs. Verifying, updating, and drafting detailed piping plans including pipe routing, instrument and valve location

Canby, OR 97013 • (29.1 miles) • Full Time • 9/22/2026

JOIN MILWAUKEE ELECTRONICS – OVER 70 YEARS OF INNOVATION & EXCELLENCEMilwaukee Electronics is a contract electronics manufacturer bringing innovations to life from prototype to production. Our mission is to Accelerate expanding what’s possible for our customers, our people, and our communities.We operate as One Team, Take Ownership, Seek to Serve, and Go Beyond to deliver quality, operational excellence, and scalable manufacturing solutions in a fast-paced, technology-driven environment.SUMMARYThe NPI Engineer is responsible for supporting the successful introduction of new electronic products from design through pilot builds and transition into full production. This role partners with engineering, manufacturing, quality, and program management teams to ensure new products are manufacturab

Beaverton, OR 97003 • (42.7 miles) • Full Time • 9/22/2026

Position Title: Outside Plant EngineerBase Salary: $70,400 to $110,000 annually DOEBenefits: Medical, dental, vision, 401k, flexible spending account, paid sick leave and paid time off, parental leave, quarterly performance bonus, training, career growth and education reimbursement programs.Ziply Fiber is a local internet service provider dedicated toelevating the connected livesof the communities we serve. We offer the fastest home internet in the nation, arefreshingly great customer experience,andaffordableplans that putcustomersin charge.As ourstate-of-the-artfiber network expands, so does our need for team members who can help us grow and realize our goals.OurCompany Values:Genuinely Caring:We treat customers and colleagues like neighbors, with empathy and full attention.Empowering You

Tualatin, OR 97062 • (35.5 miles) • Full Time • 9/22/2026

Assembler I, Optics2nd Shift M-Th, 15:15 - 01:45SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees a

Lake Oswego, OR • (39.6 miles) • Full Time • 9/22/2026

Who We Are:West Yost is a water resource management and engineering firm focused exclusively on water. Since our founding in 1990, we have partnered with public agencies including cities, counties, utilities, and water districts to plan, design, and deliver water, wastewater, and stormwater solutions that support safe, reliable, and resilient communities.Our team of more than 270 professionals brings together expertise in groundwater, water supply, treatment, infrastructure, recycled water, stormwater, construction management, and operations technology. We support projects from early planning and permitting through design and construction and complement our engineering services with program management and public outreach to help clients move work forward and engage their communities.We are