Tangent, OR • (20.7 miles) • Full Time • 9/26/2026

Job Title: Industrial PainterJob DescriptionThis role focuses on preparing, mixing, and applying industrial coatings to fabricated steel products in a fast-paced manufacturing environment. You will ensure all coatings meet quality standards and project specifications while safely operating material handling equipment such as forklifts. The position requires strong attention to detail, familiarity with industrial paint systems, and the ability to follow technical documentation and work instructions accurately.Pay$22.00 - $25.00 per hour (Based on Experience)ScheduleMonday - Friday | 6:00 AM - 4:30 PMOvertime available based on production needs and customer demand.ResponsibilitiesPrepare fabricated steel surfaces for coating, including cleaning, sanding, and other surface preparation tasks,

Salem, OR • (6 miles) • Full Time • 9/25/2026

Manufacturing Planning Systems AdministratorLocation: Salem, OR AreaEmployment Type: Full-Time, Direct HireReports To: VP of OperationsPosition SummaryWe are seeking a Manufacturing Planning Systems Administrator to manage and optimize the ERP/MRP systems, configurations, and master data supporting production planning, inventory control, and manufacturing operations.This role partners with Production, Operations, Engineering, Inventory, and Quality teams to translate manufacturing requirements into effective ERP/MRP configurations and processes. The ideal candidate combines hands-on manufacturing knowledge with strong ERP/MRP functional expertise.Key ResponsibilitiesServe as the primary functional administrator for the manufacturing ERP/MRP system.Configure and maintain ERP/MRP functionali

McMinnville, OR 97128 • (25.9 miles) • Full Time • 9/24/2026

Repairs, installs, and performs preventive maintenance on all production equipment to ensure that such equipment is always in good operable condition. Uses electrical and mechanical expertise to trouble shoot, repair, install and perform preventive and interactive maintenance on all production equipment accessories to ensure that all equipment is always in good operable condition.Primary Responsibilities:1. Install, operates, maintains, checks, and trouble-shoots all types of A/C and D/C electrical equipment. Install, trouble-shoot, and repair solid state and electronic equipment as well as mechanical equipment.2. Uses safe working practices and always reports/repairs any hazard conditions.3. Inspects machines, takes any required test, and completed “all” reports and paperwork as required.

Wilsonville, OR 97070 • (35.3 miles) • Full Time • 9/24/2026

Inspector I Location: Wilsonville, OregonPay Rate: $20.90 per hourSchedule: Swing Shift Monday through Friday, 2:30 p.m. to 11:30 p.m.Resume RequiredPosition Summary The Inspector I is responsible for performing and coordinating daily quality inspection activities throughout the manufacturing process, including incoming, in-process, and final inspections. This position helps ensure that products meet established specifications, regulatory requirements, internal procedures, and customer expectations.The Inspector I serves as a key connection between the Quality and Operations teams by supporting consistent inspection practices, identifying and escalating quality concerns, and helping maintain overall product quality and production continuity.Essential Responsibilities Coordinate daily quali

Molalla, OR 97038 • (30.6 miles) • Full Time • 9/24/2026

Quanexis looking for aProduction Associate (Dimter Tailoff and Packager) - Daysto join our team located inMolalla, Oregon.Quanex Custom Components, a manufacturer of cabinet doors, is seeking people with strong work ethic to become part of our manufacturing team. The Production Associate will perform a variety of tasks related to the manufacturing of cabinet doors which could include sanding, using woodworking machinery, packaging, and many more.What’s attractive about the Production Associate position?An opportunity to be a part of a local company with longevity, while having the full support and benefits of an international corporationPay: $18.50 - $21.39 an hour, depending on experienceThis is a Full-time position with Day shift hours that typically start at 5:00am, 6:00am or 7:00amWhat

Albany, OR 97321 • (13.8 miles) • Full Time • 9/23/2026

Position Summary: The Staff Mechanical Engineer serves as a senior technical leader responsible for driving complex mechanical system designs from concept through production. This role leads large-scale engineering projects with a strong emphasis on advancing existing product platforms and delivering configuretoorder solutions. The engineer creates comprehensive engineering documentationincluding advanced plumbing schematics, 3D SolidWorks models, analyses, test procedures, and root-cause investigationswhile ensuring the highest standards of quality, clarity, and technical rigor.In addition to delivering individual project work, the Staff Mechanical Engineer provides technical leadership across the engineering team, mentoring junior engineers, establishing design standards, and promoting

Stayton, OR 97383 • (18 miles) • Full Time • 9/19/2026

THE OPPORTUNITYWe're not looking for someone who still needs direction. We're looking for someone who can take a set of plans, walk a job site, and get it done right and who's ready to help shape the next generation of sheet metal craftsmen while they're at it.Santiam Heating & Sheet Metal has spent 30 years building a reputation for unmatched craftsmanship and integrity across the Pacific Northwest. Our Sheet Metal division specializes in custom metal fabrication and installation roofing, siding, flashing, gutters, downspouts, and decorative exterior metalwork on commercial and residential buildings. This is where the trades meet the art of metal, and a journeyman is the one who sets the standard for how it's done.WHAT THIS ROLE ISWe're looking for a skilled Sheet Metal Journeyman with at

Corvallis, OR • (21.4 miles) • Full Time • 9/18/2026

Job Title:Wafer Fab Process EngineerPay Rate:To be negotiatedExpected Weekly Hours:40Expected Start Date: 02 Nov 26Position SummaryThis position is responsible for supporting various processes used in a silicon wafer fab environment. The candidate will utilize their understanding of fabrication processes and product development methodologies to achieve the yield goals of assigned toolset/process step(s). The wafer fab process engineer will collaborate with product R&D teams to make decisions on process quality based on data and statistical analysis.Duties and ResponsibilitiesDevelop fundamental understanding of fabrication processes and product development methodologies against target yieldsTake ownership for an assigned toolset or process step(s) to optimize process quality controls vs co

Newberg, OR 97132 • (33.2 miles) • Full Time • 9/16/2026

Job SummaryThe Food Manufacturing Operator is responsible for operating production equipment, preparing ingredients, packaging finished products, and ensuring food safety and quality standards are met. This role supports daily manufacturing operations by following production schedules, maintaining a clean work environment, and ensuring products are produced efficiently and safely.ResponsibilitiesOperate food processing and packaging equipment according to established procedures.Follow production schedules and work orders to meet daily output goals.Measure, weigh, mix, and prepare ingredients as required.Monitor product quality and report any issues or deviations.Inspect products and packaging to ensure compliance with quality standards.Perform basic equipment setup, adjustments, and cleani

Tualatin, OR 97062 • (39.3 miles) • Full Time • 9/15/2026

Description: Ascentec Engineering is a rapidly growing precision manufacturing company specializing in high-quality products for world-class customers in aerospace, defense, and advanced technology markets. We pride ourselves on our commitment to customer focus, employee growth, trust & integrity, operational excellence, and acting like an owner.We are seeking an experienced Manufacturing Project Manager to lead technical projects, new product introductions, and manufacturing system implementations. This role requires a unique blend of project management expertise and hands-on manufacturing/engineering knowledge to successfully coordinate complex projects in our precision production environment.This is a hands-on technical role requiring shop floor presence and direct interaction with prod

Harrisburg, OR 97446 • (39.9 miles) • Full Time • 9/10/2026

We are currently hiring a dependable and hardworking Packaging Associate for a busy wood prefinishing company. This position involves packaging finished wood products, preparing orders for shipment, and assisting with general warehouse duties in a production environment.Forklift experience is a plus, but not required.Responsibilities:Package and prepare finished wood products for shippingStack, wrap, label, and organize materialsAssist with loading and unloading productsMaintain a clean and organized work areaFollow safety procedures and production guidelinesSupport warehouse and production teams as neededOperate a forklift safely (if experienced/certified)Qualifications:Reliable and dependable attendanceAbility to lift and move materials throughout the shiftComfortable working in a wareho

Sherwood, OR • (37.3 miles) • Full Time • 9/7/2026

Madden Industrial Craftsmen is seeking a CNC Maintenance Technician for a long-term role with an organization located in Sherwood, OR. The position includes preventative maintenance, troubleshooting and repair of both CNC and manual mills and lathes along with other miscellaneous equipment used in the support of Production. This opportunity is a weekend shift, Friday through Monday. Pay: $34-$45/hrCNC Maintenance Technician Responsibilities:Advanced troubleshooting and repair of electronic circuitry including wiring, motor controls and sensorsDiagnose, adjust, repair, or replace non-functioning hydraulic and pneumatic componentsDiagnose, adjust, repair, or replace non-functioning machine components and control instrumentsRead and interpret electrical, hydraulic and pneumatic schematicsReco

Lake Oswego, OR 97035 • (42.8 miles) • Full Time • 9/5/2026

Position DescriptionJob Title: Sr. Manufacturing Quality EngineerJob Location: Lake Oswego, OR (Hybrid)Position Status: Full-timeReports to: Sr. Director, Manufacturing Operations & QualityDepartment: QualityFLSA Status: ExemptAbout the JobAre you passionate about aviation, technology, product quality, and manufacturing excellence? Do you thrive in a hands-on, cross-functional environment where quality systems, supplier performance, repair operations, and production execution all come together? Lightspeed Aviation is seeking a Sr. Manufacturing Quality Engineer to support premium aviation headset products and service operations.Position Overview:The position owns, under direction of Sr. Director Manufacturing Operations & Quality, product quality assurance across domestic and international

Canby, OR • (34.8 miles) • Full Time • 9/4/2026

Are you ready to take the next step from skilled Installer to jobsite leader? At Groundworks, North America’s leader in foundation solutions, our CoForeman are driven professionals who are ready to build their skills to grow into a Foreman position. Working sidebyside with an experienced Foreman, you’ll learn how to lead crews, manage daily jobsite operations, and uphold our standards for quality, safety, and customer satisfaction. With handson leadership training, industry-leading certification program, and a clear path to advancement, this role is built for those who want to develop their leadership skills while continuing to do impactful work in the field.The Co-Foreman is a leader as well as a contributor on our crew and an integral part of our success. The Co-Foreman coordinates tasks

Newberg, OR 97132 • (33.2 miles) • Full Time • 9/30/2026

Position Summary:The Chair Assembler I supports the production team by assembling components used in dental chair manufacturing. This position involves light mechanical assembly, inspecting parts, using basic hand tools, and following established work instructions whilemaintainingquality and productivity standards.Primary Duties and Responsibilities:Assemble, position, and align parts and components according to established work instructions.Use basic hand tools such as screwdrivers, pliers, and other assembly equipment.Inspect parts and components for defects, damage, or quality concerns.Follow established production and safety procedures.Properly care for assigned tools/equipment and complete required documentation accurately.Maintain workstation materials,assistwith inventory counts, an

Sherwood, OR 97140 • (36.6 miles) • Full Time • 9/29/2026

Legacy Talent Search is currently seeking candidates for a Heavy Equipment Assembler role in Sherwood, OR. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest quality products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their manufacturing process.Key Responsibilities:Assembly Operations: Assemble heavy equipment using hand, electric, and air-powered tools, ensuring all components fit correctly and meet quality standards.Blueprint Interpretation: Read and interpret blueprints, diagrams, and work orders to determine assembly instructions and specifications.Quality Assurance: Conduct inspections and tests on assembled equipment to verify adherence to design specificatio

Tualatin, OR • (39.6 miles) • Full Time • 9/29/2026

Job Title: Assembly Technician Location: Tualatin, OR 97062 (On Site) Pay Range: $22 - 25.30/Hr. On W2 (shift based) Duration: 2 years contract temp to hire Job Description: Effectively use hand tools, torque wrenches, equipment & fixtures to assemble WFE Read & navigate work instructions & schematics Work in teams to ensure workflow & production schedule is maintained Navigate computer-based work instructions to install parts & hardware using hand tools & fixtures if needed; on wafer fabrication equipment (WFE) in a Lean manufacturing clean-room environment. Provide flexibility & responsiveness for changing priorities including rework requirements & pilot build projects Ensures the correct parts were delivered & performs visual inspection of components prior to installation Assists with a

Corvallis, OR • (21.4 miles) • Full Time • 9/28/2026

OptiTrack is seeking a detail-oriented and skilled Associate Assembly Technician to join our manufacturing team. As an Associate Assembly Technician, you will play a key role in ensuring the efficient and timely production of our high-quality motion capture systems. This is an exciting opportunity to join a leading technology company and contribute to the development of cutting-edge motion tracking solutions.This is an entry level position which may require applicants to work full-time through a temp agency before full-time OptiTrack employee.Responsibilities Perform assembly and testing of OptiTrack motion capture systems according to established standards and procedures.Troubleshoot and repair equipment as needed to maintain production flow.Collaborate with the production team to meet pr

Albany, OR 97321 • (13.8 miles) • Full Time • 9/26/2026

Job Summary:The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment.Essential Duties and responsibilities:Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular SawTable SawRouterPneumatic Nail Gun (roofing, framing and finish work)DrillsAnd other tools needed for measuring, cutting, fastening, and drillingFrame, layout and build floorsPrepare, layout and build wallsLayout, run and install electrical lines, switches, receptacles and panels/breaker boxesInstall and prepare dry for finish tape, mud and textureComplete roof construction, decking, flashing and shinglingCabinet and or finish carpentry and

Lake Oswego, OR 97035 • (42.8 miles) • Full Time • 9/24/2026

Sonetics provides team communication solutions for enhancing the productivity, safety, and effectiveness of work teams in aviation, firefighting, public works, marine, construction, and industrial operations. Our communication systems ensure all team members can hear and be heard, even in the most challenging environments. Sonetics pioneered the development of hands-free wireless headsets, which allow team members to stay in continuous contact without being tethered to an intercom or belt pack.We are currently looking for an Assembler to join our Production team. Essential job duties for these positions include:Test, inspect, and assemble Sonetics products in order to maintain quality, service, and profitability.Rework and perform complex modifications to a wide range of products in order

Beaverton, OR 97008 • (44.6 miles) • Full Time • 9/24/2026

Benefits:401(k)Company partiesCompetitive salaryDental insuranceFree food & snacksHealth insurancePaid time offProfit sharingPosition Description: We are currently looking for someone who is organized, detail-oriented, efficient, and experienced in industrial automation electrical control systems to help us grow our business. The master electrical controls panel builder is primarily a production role with some onsite work. Our panel builders construct a wide variety of custom automation control systems, and must demonstrate mastery of industrial control wiring, panel fabrication and assembly. While repeat production does occur, the builder must also be able to assume responsibility for creating one-of-a-kind control systems from schematic drawings, and a thorough understanding of best-prac

Portland, OR 97223 • (43.6 miles) • Full Time • 9/22/2026

POSITION SUMMARY:The Assembly Tech is responsible for cabinet assembly and packaging of final productsHours: Monday - Thursday 6am - 4:30pmWage: $24.00 - $25.00 / hourThis role is onsite in Tigard, OR.JOB RESPONSIBILITIES:Final cabinet assemblyLED light wiring and signage assemblyInsures outputs are maintained to standards or better.Operates assembly equipment as required.Visually inspects production for defects associated with work performed by self or other defects.Oversees regular attendance and professionalism.Additional duties as assignedQUALIFICATIONS:High School Diploma or General Education Degree (GED) preferred2+ years of previous assembly experience; or equivalent combination of education and experienceAbility to read and follow shop drawingsAbility to work overtime as necessary.

Wilsonville, OR 97070 • (35.3 miles) • Full Time • 9/18/2026

Assembler Location: Wilsonville, OregonCompany: Audix / VidendumDepartment: Operations / ManufacturingEmployment Type: Full-TimeJoin Audix – Build Products Used by Audio Professionals Around the World At Audix, we design and manufacture professional audio products known for quality, reliability, and performance. Our products are used by musicians, audio engineers, broadcasters, production professionals, and content creators around the world.We are looking for an experienced Assembler to join our manufacturing team in Wilsonville, Oregon. This is a hands-on role for someone who enjoys detailed work, takes pride in quality, and is comfortable working with small mechanical and electronic components.In this position, you will assemble finished products and subassemblies of moderate complexity

Corvallis, OR • (21.4 miles) • Full Time • 9/17/2026

Lionbridge is seeking Assemblers to join our experienced team on-site in Corvallis, OR. In these roles, you will be a resource for operation and maintenance of a wide variety of products, technology systems and other related equipment sets, with an emphasis on safety. No experience is necessary, and you will receive full on-the-job (OTJ) training! What you will do Receive full training on State-of-the-Art equipment and all safety practices!Execute standard working procedures and/or experimental work in your designated lab under the supervision of the Lead Tech or Supervisor.Perform preventative maintenance and first level troubleshooting on processes and tooling as trained.Perform execution, data entry and lot-tracking for all your work.Load/Run/Unload materials and jobs and support equipm

Salem, OR 97301 • (8.1 miles) • Full Time • 9/15/2026

iNRCORE Groupis a leading, vertically integrated provider of highly engineered, high-reliability, and high-performance passive electronic components. We are known for manufacturing proprietary magnetics, capacitors, resistors, filters, and more. We serve mission-critical data and power applications in the Defense, Aerospace & Avionics, Space, Smart Grid, Medical, AI/Data center, and Hi-Rel industrial markets.iNRCORE Group currently has fourteen (14) manufacturing facilities across the globe with more than one thousand (1000+) employees – and growing! Our business entities include company names such as Bicron, Coast Magnetics, DYCO, Gowanda, iNRCORE, Passive Plus, RCD, Sentran, TTE, and Vanguard Electronics. Our organization has a world-class reputation for innovation, quality products and

Salem, OR 97305 • (13.9 miles) • Full Time • 9/15/2026

Hours- M-F 5:30AM-2PMSUMMARYWe are seeking a Production Assembler to join our team in a manufacturing facility. The Production Assembler will be responsible for assembling components accurately to create finished products. Patriot Products Group builds proprietary diesel and/or electric driven pump packages. Finished products will be built on fuel skids, DOT trailers, or in sound attenuated enclosures. We are seeking to fill multiple positions on our production floor. Our ideal candidate will have a high mechanical aptitude and ability to work with high sense of urgency and accuracy. This position assembles pump packages by following engineer drawings/instructions and working as part of a team. The assembly process includes mounting pumps, wiring engines/control panels, dressing pumps and

Canby, OR 97013 • (32.5 miles) • Full Time • 9/15/2026

Build technology that matters, with a team that values quality, precision, and people. For over 70 years, Milwaukee Electronics has partnered with innovative companies to bring complex electronic products to life. We’re growing, and we’re looking for a skilled Assembler II who takes pride in high-quality workmanship and teamwork.Work just 3 days a week, and enjoy a 4-day weekend every week! This position follows aThursday - Saturday, 5:00 AM – 5:00 PM Dayshift schedule. You’ll work full-time hours in just 3 days, giving you 4 consecutive days off each week to recharge, focus on personal priorities, or simply enjoy more balance.What this schedule offers:Overtime payfor any hours worked over 10 hours in a dayA consistent, predictable 3-day workweekA steady schedule that supports work-life ba

Newberg, OR 97132 • (33.2 miles) • Full Time • 9/9/2026

Position: Electrical Assembly TechnicianReports to: Plant ManagerLocation: Newberg, ORJob SummaryThe Electrical Assembly Technician is responsible for the assembly, integration, testing, troubleshooting, and repair of electrical and electro-mechanical systems supporting the production of standard products, Engineer-to-Order (ETO), and custom equipment. Working within a vertically integrated manufacturing environment, this role builds complete machine assemblies by integrating electrical control system components in accordance with engineering documentation, quality standards, and customer requirements.Working closely with Electrical, Controls, Mechanical, and Manufacturing Engineering, the Electrical Assembly Technician supports both production and new product development by resolving tech

Hillsboro, OR 97123 • (41.6 miles) • Full Time • 9/4/2026

We want YOU to join our Assembly team in Hillsboro, Oregon. Do you have a mechanical aptitude and enjoy hands-on assembly? Are you interested in joining a cutting-edge team that's spearheading the semiconductor surge? We are seeking Assembly Technicians at our state-of-the-art semiconductor servicing industry facility in Hillsboro, OR. This is a full-time, permanent position that comes with a highly competitive pay rate, second-to-none benefits, and a high ceiling for growth!The Assembly Technician III performs various electronic or electro-mechanical assembly operations on assemblies or sub-assemblies. They determine and follow methods and sequences of operations in performing wiring, component installation, hand soldering, and cable harnessing on assembly units. They make setups and adju

Corvallis, OR 97330 • (17.4 miles) • Full Time • 9/29/2026

Description: About UsMiCROTEC is a high-tech company and global leader in wood scanning solutions. Founded in 1980 and headquartered in Bressanone, Italy, MiCROTEC has offices in Sweden, Germany, Finland, Canada, and the United States. We partner with some of the world’s largest sawmills and wood processing companies to help optimize production, improve product value, and support more sustainable wood utilization.Our team is driven by innovation and a passion for advancing the wood processing industry through cutting-edge technologies including CT (Computed Tomography), X-ray, visual scanning, deep learning, artificial intelligence, and stereoscopic imaging.As the world’s leading provider of wood scanning solutions, we offer meaningful opportunities for professional growth and development

Harrisburg, OR 97446 • (39.9 miles) • Full Time • 9/26/2026

Production Warehouse Worker Pay: $19/hourJob Type: Full-TimeWe are currently hiring Production Warehouse Workers to join a busy manufacturing team. This is a hands-on position working in a production environment where you’ll help with assembling, preparing, and packaging products while maintaining quality and safety standards. Responsibilities: Assist with daily production and manufacturing tasksOperate basic tools and equipment as neededAssemble, prep, and package productsLoad, unload, and move materials throughout the facilityInspect products for quality and accuracyKeep work areas clean and organizedFollow safety procedures and production guidelinesWork efficiently as part of a team to meet production goalsPerform other general warehouse and production duties as needed Qualifications: P

Wilsonville, OR 97070 • (35.3 miles) • Full Time • 9/18/2026

Do you have experience in inventory for a manufacturing environment? Like night shift? Samtec in Wilsonville, OR has an opening on our Logistics team as a Work-In-Process Attendant. The position supports production team member with inventory needed to keep active. Schedule front half nights: Sunday-Tuesday nights, 6pm-6am (3x12hrs, full time) Must have ability to train on day shift Monday- Friday for approximately a month prior to going to nightsPay starts at $22/hr, and 75 cents per hour night shift differential.Full time benefits (health, dental, pharmacy, vision, 401k match of 5% and a 7% profit sharing contribution on top of that, vested after 2 years.)This position requires excellent organization, computer skills, time management, and customer service skills. Essential Functions/ Res

Tualatin, OR 97062 • (39.3 miles) • Full Time • 9/6/2026

OverviewAt KeHE, we’re obsessed with creating solutions, unboxing potential, and serving others – and it all starts with you. As an employee-owned distributor of natural and organic, specialty, and fresh products, we’re committed to making a positive impact and scaling our success together. With a culture that fosters development and opportunity, you’ll be embarking on a career that’s moving forward. When you join KeHE, you’re becoming part of a team that is a force for good.ResponsibilitiesThe Cut and Wrap associate cuts, packages and repackage products to customer specifications. This includes cutting and dispensing product and repackaging and labeling goods to be sent out to the customers. Soft and hard cheeses, olives and nuts are taken from the vendors’ containers and re-sized or pack

Salem, OR • (6 miles) • Full Time • 9/30/2026

About the RoleWe are seeking Robot Teleoperators to support next-generation robotics and AI programs.In this role, you will remotely operate and supervise robotic systems through advanced control interfaces, helping robots perform real-world tasks safely and efficiently. Your work will directly contribute to the development and validation of intelligent robotic systems used across manufacturing, logistics, retail, and service environments.This position is ideal for candidates with strong attention to detail, excellent hand-eye coordination, and the ability to remain focused in fast-paced operational environments.What You'll Do Robot OperationsOperate robots using teleoperation consoles, controllers, and monitoring systemsMonitor live video feeds and robot telemetryPerform real-time movemen

Tualatin, OR • (39.6 miles) • Full Time • 9/30/2026

About Us: We are a family-owned custom cabinet production shop with over 25 years in the industry. As a locally owned franchise and national leader, we specialize in designing, manufacturing, and installing custom closets, home offices, home theaters, pantries, bookshelves, wall beds, and more. Our commitment to quality and innovation has set us apart in the market.Job Description: We are seeking an experienced CNC Operator to join our dedicated team. The ideal candidate will also have experience running an edge banding machine and, preferably, experience in making laminate counter tops. Spanish-speaking applicants are encouraged to apply.Key Responsibilities:Operate CNC machines and edge banding machines with precision.Collaborate with the production team to ensure high-quality output.Ass

Albany, OR 97322 • (15.5 miles) • Full Time • 9/30/2026

Karman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies’ core mission priorities, and meet the accelerating demand for access to space. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs.As a Press Operator, you will support the production of drawn and forged components by setting up and operating hydraulic presses, lathes, and related equipment. Your work helps ensure components meet strict specifications and quality standards, supporting reliable, mission-critical systems across o

Beaverton, OR 97008 • (44.6 miles) • Full Time • 9/30/2026

Custom Print TechnicianPay: $21.00 per hourLocation: Beaverton, OR 97008Schedule: Monday-Friday, 7:00 AM - 3:30 PMAbout the RoleCreative Safety Supply is looking for a Custom Print Technician to join our Sign Shop team. In this role, you'll produce custom labels, signs, floor markings, stickers, and other printed products using a variety of print production equipment.This is a hands-on production position focused on operating equipment, reviewing orders for accuracy, maintaining quality standards, and ensuring customer orders are completed correctly and on time. Familiarity with Adobe software is helpful, but the majority of the role is centered on print production rather than graphic design.If you're detail-oriented, enjoy working with your hands, and take pride in producing high-quality

Salem, OR 97301 • (8.1 miles) • Full Time • 9/30/2026

Homegrown NE Salem, a dynamic leader in the cannabis industry, has an immediate opening for a full-time Shift Lead position. This is a fantastic opportunity for an adaptable, reliable, and hardworking person to play a vital role in our company. The ideal candidate is organized, detail-oriented, and able to juggle and prioritize multiple projects in an extremely fast-paced team environment.Duties to include, but are not limited to:Effectively lead the store while the Manager or Assistant Manager is not present.Lead each shift by example.Flexible to help at other locations when neededAppropriately delegate duties, and assign tasks as needed.Ensure sales goals are metAdhere to all company guidelines.Oversee that laws and regulations are being followed.Perform all POS duties.Responsible for th

Hubbard, OR • (26.8 miles) • Full Time • 9/30/2026

Join the team at Trillium Pacific Millwork, Inc., where your role as a Swing Shift Production Associate is both impactful and rewarding. You'll be part of a collaborative environment that prioritizes safety, quality, and mutual respect. With modern equipment and a range of projects, each day promises new challenges and learning opportunities. Your tasks will include assisting machine operators, hand-sanding materials, and maintaining safe, clean work areas. If you're detail-oriented and eager to grow, you'll thrive here. We offer a consistent Monday–Friday schedule from 3:00 PM to 11:30 PM, competitive pay, and the chance to earn monthly bonuses. Our commitment to innovation and employee growth means you'll have plenty of opportunities for career advancement. At Trillium Pacific Millwork,

Salem, OR 97302 • (3.9 miles) • Full Time • 9/29/2026

Benefits:401(k)401(k) matchingDental insuranceHealth insuranceOpportunity for advancementPaid time offBonus based on performanceCompany carCompetitive salaryTraining & developmentVision insurance Are you already running restoration jobs and ready to step into a larger leadership role? ServiceMaster Restore is looking for a Production Manager to lead our Water Mitigation, Fire Restoration, and Contents Cleaning operations. When disaster strikes a burst pipe, a house fire, unexpected mold families and businesses in our community need someone they can trust. ServiceMaster Restore has been that trusted name for years, and we're looking for a relationship-driven salesperson to help more people find us when they need us most. f you’re currently a Senior Technician, Crew Chief, or Production Mana

Salem, OR 97301 • (8.1 miles) • Full Time • 9/29/2026

Recruiting Opportunity Closes: 10/3/2026Hourly Wage: $15.55Status:Seasonal; various hoursNumber of Positions: 65Position Title: Kettle WorkerApplicants must apply in person.To apply go to1865 Bill Frey Dr, Salem, OR 97301 on the below listed dates.Job fair dates 10/20, 10/22, 10/27,10/29, 11/03, 11/05, 11/10, 11/12, 11/17, 11/24 and 12/01 an 12/03 between the hours of 1:00pm-3:00pm for a Kettle Worker job fair.Recruiting AccommodationStatement:To obtain assistance with accommodations related to the American’s with Disabilities Act (ADA) concerning your application process, please contact 1-oremail , attention Donna Campagnolo.The Salvation Army Mission Statement:The Salvation Army, an international movement, is an evangelical part of the universal Christian Church. Its message is based on