Frederick, MD • (45 miles) • Full Time • 9/13/2026

Road Technician | facilities SupportLarge national rental company looking for Field Maintenance Technicians to set up and maintain trailer and tented kitchen complexes. No cooking involved.Job requirements:Clean driving record.General mechanical aptitude.Extensive travel required.Home base located in Carroll County Maryland.Compensation commensurate with experience.Mechanical Maintenance & TroubleshootingDiagnose and repair mechanical or operational failures on the road for high-output appliances (ovens, fryers, grills, refrigeration).Maintain onboard utility systems such as water pumps, water heaters, graywater tanks, and ventilation/hood systems.Conduct preventive maintenance checks on transport trailers, including brakes, tires, hitch assemblies, and leveling jacks.\nCompany Description

Baltimore, MD 21202 • (31.9 miles) • Full Time • 9/13/2026

Senior Mechanical EngineerMid-Atlantic Preferred (Hybrid/Remote)About the organization:MD Energy Advisors (MDEA) is a rapidly growing energy advisory and program management firm partnering with utilities, federal agencies, and institutional clients to deliver complex energy and infrastructure solutions.We are increasingly focused on building a differentiated platform serving colleges and universities nationwide helping institutions navigate energy strategy, capital planning, decarbonization, and modernization of infrastructure and controls.Our approach goes beyond traditional engineering or ESCO delivery. We position ourselves as trusted advisors, guiding clients from strategy through execution.About the opportunity:MDEA is seeking a Senior Energy Engineer to serve as a key technical leade

Laurel, MD 20723 • (43.9 miles) • Full Time • 9/12/2026

Company OverviewARA is a leading C5ISR company that designs, manufactures, tests and installs innovative technologies that provide the national security community with unparalleled situational awareness, threat detection, and communications capabilities.Our disruptive, integrated solutions, assemblies and subsystems rise to the challenging demands of discerning, mission-critical customers.We leverage our capabilities to meet and exceed the requirements of our customers and empower them to remain ahead of evolving threats and complexities in a dynamic security landscape.Job SummaryThe Manufacturing Engineer Manager is a leadership role responsible for overseeing the manufacturing engineering function across multiple programs and production areas. This position provides both strategic direct

Columbia, MD 21046 • (41.1 miles) • Full Time • 9/11/2026

Join Our Team!*POSSIBILITY FOR HYBRID WORK Are you passionate about pushing the boundaries of RF technology? We are seeking a highly skilled professional to lead the design and development of advanced VHF, UHF, and microwave antenna systems. If you thrive in a dynamic environment where technical excellence meets real-world impact, this is your opportunity to make a difference. TS/SCI clearancerequired for consideration. Job Description: 1) Design, fabricate, develop, and test VHF/UHF /MW single and phased array antenna systems. 2) Perform characterizationand analysis of antennas, printed circuit antennas, radar scattering, electromagnetic shielding, wideband impedance matching, feed networks, anechoic chamber and field testing procedures, high speed structural simulation (HFSS), and electr

Leola, PA 17540 • (35.2 miles) • Full Time • 9/11/2026

Industrial Process Engineer / Manufacturing Engineer $97K-$118K DOE + Bonus | Leola, PAWestlake Pipe & Fittings is hiring a Process Engineer / Manufacturing Engineer for our high-volume, 24/7 PVC pipe manufacturing plant in Leola, PA. Join a stable, low-turnover team (average tenure 6+ years) with real career growth into Technical, Commercial, or Leadership tracks.Pay & BonusBase salary: $97,000-$118,000 DOEQuarterly bonus up to 8% of baseAnnual bonus up to 5% of baseBenefits start Day 1BenefitsMedical, Dental, Vision, Life Insurance401(k) with 4% company match + 3% automatic contribution2-3 weeks vacation (based on experience)Relocation assistance availableEducational assistance & fitness reimbursement programsWhat You'll DoLead manufacturing process improvement: reduce downtime, scrap, a

Hershey, PA 17033 • (35.6 miles) • Full Time • 9/10/2026

DescriptionWe are seeking 3-5 On-Site Break/Fix Technicians to support day-to-day End User Services operations in the Hershey area. These consultants will provide hands-on support for Dell desktops and laptops, HP/Zebra/Intermec printers, hardware peripherals, workstation imaging, and basic network connectivity issues. The team is looking for individuals who thrive in a fast-paced environment, can quickly learn new processes, and provide excellent customer service while supporting clinical and business users. Candidates should be comfortable handling 10-15 tickets per day and performing physical work, including walking, lifting, and crawling when necessary. This role will also support preparations for an upcoming Epic go-live.SkillsDeployment, Troubleshooting, Desktop, Support, Hardware, I

Red Lion, PA 17356 • (11.1 miles) • Full Time • 9/10/2026

Electrical Engineering DesignerPosition: Electrical Engineering Designer Employment Type: Full-Time Department: Engineering / DesignReports To: Engineering Manager / Project ManagerPosition SummaryWe are seeking an experienced Electrical Engineering Designer to support the design, drafting, documentation, and development of electrical systems for commercial, industrial, or building projects.The successful candidate will work closely with engineers, project managers, contractors, and clients to produce accurate electrical drawings and design documentation.Key Responsibilities· Prepare electrical engineering drawings, layouts, schematics, and details.· Develop electrical power distribution, lighting, controls, and low-voltage system designs.· Create and revise drawings using AutoCAD, Revit,

Lancaster, PA 17601-5946 • (28.2 miles) • Full Time • 9/10/2026

We are looking for an experienced Field Service Technician 5 to provide advanced on-site support for computer systems, hardware, and peripheral equipment. This long-term contract position is ideal for an experienced, detail-oriented individual who can resolve complex technical issues, support end users with a high level of customer care, and guide less experienced technicians when needed. The role requires sound judgment, strong troubleshooting ability, and a practical understanding of hardware, software, account access, and device performance in a field service environment. Responsibilities: • Diagnose technical issues affecting desktops, laptops, peripherals, and related equipment, then complete repairs efficiently in the field. • Perform preventive maintenance, system checks, and compon

Lancaster, PA 17573 • (33.1 miles) • Full Time • 9/9/2026

Job Title: Civil Engineer / Site DesignerJob DescriptionThis role focuses on the planning, design, and development of land development projects as a Site Designer (Civil Engineer). You will collaborate closely with multidisciplinary engineering teams to deliver innovative and sustainable site design solutions, including grading, stormwater management, utility infrastructure, roadway design, permitting, and construction administration. The position is ideal for an early-career civil engineer with a strong understanding of land development principles, regulatory requirements, and proficiency in AutoCAD Civil 3D.ResponsibilitiesDevelop site layouts, grading plans, and roadway designs using AutoCAD Civil 3D.Design stormwater management systems, including drainage infrastructure and erosion and

Halethorpe, MD 21227 • (35.6 miles) • Full Time • 9/9/2026

We are looking for an experienced, hands-on leader with a rare combination of audio visual, team leading and warehouse operations experience at our Halethorpe, Maryland location. You will be working in a dynamic environment surrounded by a dedicated team for a nation-wide audio visual production company with reputation for working with some of the best clients in corporate events. This is a full-time position with competitive pay ranging from $28 to $38 per hour plus opportunities for career growth and AV equipment skill development.You will be offered great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Paid Time Off, Short-term disability, Mobile Device Plan Reimbursement, and generous 401k matching. We invite you to apply and elevate your caree

Severn, MD • (42.8 miles) • Full Time • 9/8/2026

Licensed Electrical Engineer or EITBowley Jones LLC is an Architecture & Consulting MEP Engineering firm seeking a licensed full-time Electrical Engineer or EITto join our growing team in Severn, Maryland. As a contributing member and leader of the team, you will manage a portfolio of electrical consulting projects from start to finish. You will perform all aspects of the electrical engineering process including site survey, documentation, design, client relationships, and construction administration. We are seeking a highly motivated individual with an entrepreneurial spirit who wants to directly contribute to company success and grow with us.Activities IncludeConduct site and building system surveys.Develop and draw complex electrical design solutions in accordance with current code requ

Lutherville-Timonium, MD 21093 • (22 miles) • Full Time • 9/5/2026

Low Voltage Programmer / InstallerLocation: Baltimore, MDCompany: Techmark CorporationJob Type: Full-TimeCompensation: Competitive salary based on experienceAbout Techmark CorporationTechmark Corporation is a leading provider of fire alarm, security, access control, video surveillance, networking, and integrated technology solutions throughout the Mid-Atlantic region. We are seeking a dependable, motivated, and experienced Low Voltage Programmer/Installer to join our growing team.This position is ideal for someone who enjoys hands-on work, troubleshooting complex systems, and working both independently and as part of a team. The successful candidate will assist with installations, programming, commissioning, and service of a wide range of low-voltage systems.ResponsibilitiesInstallation &

Bel Air, MD • (23.4 miles) • Full Time • 9/5/2026

Are you excited to take thenext step in your construction careerand master the details that define quality? JRB LLC is looking for an ambitious individual who is eager to learn, grow, and become an indispensable part of our team. If you have an innate focus onprecisionand are seeking an opportunity to develop specialized expertise in high-end interior construction, this role is for you!JRB LLC is a premierRough and Finish Carpentry contractor, specializing in the installation ofdoors, frames, hardware, shelving, wood trim, paneling, and interior fixturesformultifamily and commercial projects. We are looking for a highly detailed and drivenProject Engineerto manage the critical documentation and coordination that brings high-end architectural drawings to life on the job site. If you thrive

Lancaster, PA 17601 • (29.3 miles) • Full Time • 9/5/2026

Overview We are seeking a motivated and detail-oriented Manufacturing Engineer I to join our dynamic maintenance engineering team. This entry-level role offers an exciting opportunity to contribute to diverse infrastructure and construction projects, supporting senior engineers in delivering innovative solutions. As a Junior Engineer, you will gain hands-on experience in project planning, technical design, and construction oversight, all while developing your skills in civil, mechanical, and water systems engineering. This position is ideal for individuals passionate about building sustainable infrastructure and eager to grow within a collaborative environment.Essential Duties & ResponsibilitiesDevelop and establish standard running conditions to improve Safety, Quality and CostsIdentify,

West Grove, PA 19390 • (45 miles) • Full Time • 9/4/2026

Manufacturing Engineer – Cable & Harness ManufacturingLocation: Chester CountyJob Type: Full-TimeJoin Our Manufacturing TeamWe are looking for an experienced, hands-on Manufacturing Engineer to join our team and play a key role in the manufacturing of custom cable assemblies, wire harnesses, and electromechanical assemblies and Tubing assemblies.This is an excellent opportunity for someone who enjoys working at the intersection of engineering, manufacturing, quoting, and the production floor. You won’t be sitting behind a desk all day. You’ll be involved in figuring out how products should be built, how long they should take to build, and how to make the process better.What You’ll Do· Develop manufacturing processes for new cable, harness, and electromechanical assemblies and Tubing assemb

Baltimore, MD • (31.3 miles) • Full Time • 9/3/2026

Job Title: Architectural / Construction DrafterLocation: Baltimore, MDJob Type: Full-timeReports To: Engineering ManagerSalary: $65k-$85k, Commensurate with experienceAbout the Company:Alliance Exterior Construction is a leading facade and building envelope contractor specializing in roofing, wall systems, architectural metal panels, glazing, and building envelope construction. With a commitment to quality craftsmanship and innovative solutions, we serve clients across commercial, institutional, and industrial sectors in the Baltimore-Washington area.Position Summary:We are seeking a detail-oriented Architectural / Construction Drafter to join our growing engineering department. The ideal candidate is a recent college graduate or early-career professional with experience with AutoCAD and/o

Columbia, MD • (39.5 miles) • Full Time • 9/3/2026

About the Company:Based in Maryland, Nextage has provided trusted aerospace engineering services for over ten years. We specialize in avionics and aerospace systems engineering, electrical engineering, software design, and automated test system development. Our team of dedicated engineers proudly supports global missions, bringing integrity and technical excellence to every project.Key Elements:In the role, the Electrical Engineer II will complete Digital Design work through Schematic Development and PCB Layout, focus on Electrical testing of assembled boards, and perform minor software development to execute on Raspberry Pi and custom PC Boards. This role is critical for the physical realization and hardware stability of the PolarFire SoC-based systems.The ideal candidate will live in Mar

Cockeysville, MD 21030 • (18.3 miles) • Full Time • 9/3/2026

Position: Electrical Engineer IILocation:Schaumburg, IL / Albuquerque, NM / Avon, CO / Hunt Valley, MD / Belleville, IL / Boise, ID / Chicago, IL / Corona, CA / Dallas, TX / Davenport, IA / Lakewood, CO / Evansville, IN / Ft. Collins, CO / Ft. Myers, FL / Irvine, CA / Milwaukee, WI / Newport, KY / Northwest Arkansas / Orlando, FL / Overland Park, KS / Palm Springs, CA / Phoenix, AZ / Riverside, CA / San Diego, CA / Seattle, WA / Springfield, MO / St. Louis, MOYears of Experience: 3-5 YearsAbout RTM:RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensiv

Jessup, MD 20794 • (42.2 miles) • Full Time • 9/2/2026

Job SummaryMechanical Designer (Engineer) - As a Mechanical Design Engineer you will be working closely with other designers to draft drawings in SolidWorks primarily to specifications that are detailed, accurate, and visually appealing. You will follow company SolidWorks guidelines for all processes, including naming conventions, data storage, and layout standards. The ideal candidate will have SolidWorks or engineering experience, excellent communication skills, and works well within a team environment. Responsible for creating 3D CAD models & fabrication drawings of components & assemblies in coordination with the company’s design & mechanical engineering team.Duties & Responsibilities (routine functions):Proper interpretation of design specifications, drawings, & schematics.Create & ma

Towson, MD • (25.2 miles) • Full Time • 9/1/2026

POSITION TITLE: Senior GIS Programmer/Systems AnalystLOCATION: Towson, MD-HybridMust be US citizen or green card holderGovernment agency is seeking a qualified Senior GIS Programmer/Systems Analyst to perform application development and support activities supporting the Office of Information Technology’s GIS Program and the Office of Planning.The programmer will assist in the upgrade and development of an Agricultural Preservation Model, upgrading the current custom ArcMap AddIn (C#/Python ) to an ArcGIS Pro AddIn.Duties and ResponsibilitiesGIS application development in an Enterprise GIS environmentCode review, documentation, planning and developmentDatabase developmentMinimum Qualifications/Skills SetsMinimum of five (5) years developing and modifying applications using J2EE, .NET, JavaS

Baltimore, MD • (31.3 miles) • Full Time • 8/31/2026

About the RoleFES is seeking a Senior DDC Engineer / Programmer with deep technical expertise in building automation and control systems. This is a hands-on leadership role that combines advanced programming, field commissioning, and project delivery with mentoring and client-facing responsibilities.You’ll lead complex projects, provide technical direction to technicians, and collaborate closely with engineering, construction, and service teams to deliver reliable, high-performance control solutions.Key ResponsibilitiesCollaborate with the Engineering Department to review and advise on control drawings and project submittals.Program, integrate, and commission DDC systems and field devices across multiple platforms.Ensure accurate operation of all building control sequences, alarms, trends,

Columbia, MD 21046 • (41.1 miles) • Full Time • 8/30/2026

About the Role:ACKtive Engineering Solutions LLC is looking for a talented Electrical Engineer with a focus on PCB Layout. This is an exciting opportunity to work on cutting-edge electronic designs and make a real impact in a collaborative engineering environment. This position requires an active clearance.Responsibilities:Design, document, and develop electrical circuits for mixed-signal applicationsUse Altium Designer to create circuit schematics and PCB layoutsAssist in developing hardware architectures and brainstorming solutions to challenging design requirementsCollaborate with software, RF, and mechanical engineers to optimize all areas of designProvide technical leadership to less experienced engineersParticipate in and moderate peer reviewsRequirements:Active TS/SCI government cle

Westminster, MD • (21.2 miles) • Full Time • 8/29/2026

Position: Process Engineer/Direct HireLocation: Westminster, MD - Onsite positionPay: $85,000/year - $95, 000/year - (Depending on Experience)Direct Hire | Permanent PositionUS Citizenship REQUIREDJob Responsibilities of the Process Engineer:This role supports the companies Design Engineers as well as production support.Ensures processes are manufacturable with high quality and provide appropriate documentation and tools to the Operations team.Implements continuous process improvement projects focusing on cost reduction or output increase.Create and maintain work instructions and standard operating procedures.Works with Operations to train shopfloor employees.Works with facilities and maintenance team to identify and implement equipment upgrades.Troubleshoots, solves and documents process,

York, PA • (14.7 miles) • Full Time • 8/29/2026

CTE Inc. is a long-established progressive die Metal Stamper that uses high speed punch presses to make parts. Pay is commensurate with relevant experience. Quality Engineer will support the stamping process through these Essential Duties:· Coordinates with Management on quality and production issues.· Design, assemble and maintain sensor packages and inline machine vision for die safety, part detection and measurement purposes.· Develop and implement Corrective and Preventive Actions for Customer, Supplier and Production Issues.· Update and maintain Control Plans/FMEA for all stamped parts.· Ensure processes meet current CTE, ISO 9001 and AS9100 Standards· Communicates directly with customers on quality issues· Ensures customers’ quality requirements are being met, including APQP and PPAP

Annapolis Junction, MD 20701 • (43.7 miles) • Full Time • 8/29/2026

TheSenior Cybersecurity Engineerwill support the Transportation Security Administration (TSA) Office of Information Technology, Technology Solutions Division (TSD), specifically their mission critical systems.Your Impact to the Mission:As aSeniorCybersecurity Engineeryou will leverage technical knowledge and experience to support and lead the security initiative for multiple IT projects, programs, and initiatives. You will be responsible for working with a team of security engineers and actively interacting and communicating with various departments, teams, and workgroups to provide hands-on technical cybersecurity support on potential security risks and recommendations. You will be interacting with technical staff to executive staff, adjusting the communication and feedback accordingly.Th

Frederick, MD • (45 miles) • Full Time • 8/27/2026

Position SummaryOPEX Corporation is currently looking for a full time Field Service Technician. The worker will have a high exposure level to customer service as they will be responsible for visiting our current clients to help solve their technical issues.ResponsibilitiesThis position is responsible for the day to day maintenance, troubleshooting and repair of mail opening, document scanning and/or material handling equipmentInstalling and setting up new equipmentInteract with the customer to determine the problemCompleting field service reportsKeeping the customer informed as repairs are made and answer any question that may arise.Interact with management as well as other personnel to analyze and correct any equipment performance issues.Completing and submitting weekly online timecards a

Annapolis Junction, MD 20701 • (43.7 miles) • Full Time • 8/26/2026

Position Title:MQ Senior EngineerLocation:Annapolis Junction MDDuration:FTE (Direct)Salary:$130,000 to $150,000 yearlyWho we are looking for / Requirements:Active Secret security clearance.Due to contract requirements, only US Citizens can be considered. Candidates with dual citizenship cannot be considered.12+ years of relevant work experience requiredAt least 5+ years Unix experience requiredAt least 5+ years DevOps/ Infrastructure as Code (IaC) experience requiredCandidates must reside within a commutable distance for daily onsite work and on-call requirements.This contract supports systems that require 24x7x365 uptime. Candidates must be willing and able to meet on-call requirements, including participation in a rotational on-call schedule, if required.Bachelor's degree in relevant fie

Lutherville-Timonium, MD 21093 • (22 miles) • Full Time • 8/25/2026

Electrical MEP Engineer – Baltimore Suburbs Growing MEP engineering firm in the Baltimore suburbs is looking for Electrical Engineers with 3–8 years of experience to join their team. This is a great opportunity for an Electrical Engineer looking to take on increasingly complex building projects and grow with a strong engineering group.What You’ll Do:Design electrical systems for commercial, institutional, healthcare, and mixed-use projectsDevelop power distribution, lighting, fire alarm, and low-voltage designsPerform electrical load calculations and system studiesPrepare construction documents and specificationsCoordinate with mechanical, plumbing, architectural, and structural teamsSupport projects from concept through constructionWhat They’re Looking For:3–8 years of electrical MEP engi

Harrisburg, PA 17101 • (36.5 miles) • Full Time • 8/25/2026

Company Overview: AVASO Federal Solutions is a global leader in providing IT solutions and services, specializing in offering top-tier support and managed services. We are committed to delivering cutting-edge technology solutions to our clients worldwide. If you’re a passionate IT professional with hands- on experience in desktop support, join us at AVASO to help businesses thrive with reliable and efficient IT services.Position Overview:The Level 2 Field Services Technician will report directly to his or her regional Team Leader. In this role, the Level 2 Field Services Technician’s key responsibility is to perform in-warranty, end-user computer hardware breakfix repairs and replacements. The individual will need to have knowledge of operating systems, computer hardware and peripherals (

Lancaster, PA • (28.2 miles) • Full Time • 8/24/2026

Immediate Opening for Field Service TechnicianAbout the job - Field Service EngineeriNOEX is the most innovative solution provider for the measurement technology in the plastics industry. Today and in the future. Being both pioneers and experts, we provide our clients with added values. In the pipe, tube, film and profile extrusion industry. Our high-quality products equipped with outstanding usability offer smart and innovative solutions, the key factors towards sustained success.iNOEX, LLC has been providing equipment and service to clients throughout North America for over 20 years from our US headquarters in Lancaster, PA. We are seeking a self-motivated problem solver to grow our technical support team.What You’ll DoTravel extensively throughout North America delivering world-class cu

Aberdeen Proving Ground, MD 21005 • (35 miles) • Full Time • 8/23/2026

About the Role:As a Network Engineer, you will be responsible for designing, implementing, and maintaining our company's network infrastructure. You will work closely with our IT team to ensure that our network is secure, reliable, and efficient. Your main goal will be to ensure that our network meets the needs of our business and supports our growth.Minimum Qualifications:3+ years of experience in network engineering or related fieldStrong understanding of network protocols and technologies, including TCP/IP, DNS, DHCP, VLANs, and VPNsExperience with network monitoring and troubleshooting tools, such as Wireshark and SolarWindsAbility to obtain and maintain a U.S. Federal Security ClearancePreferred Qualifications:Cisco Certified Network Professional (CCNP) or equivalent certificationExpe

Annapolis Junction, MD 20701 • (43.7 miles) • Full Time • 8/22/2026

Join our Team of Employee Owners!Why work for a company when you can own it? Cummins-Wagner Company, Inc. aims to remain the premier manufacturer's representative and distributor of mechanical equipment and machinery within our trading area. We serve the industrial, process, heating, and cooling markets. Job Title: Outside Sales Engineer- Pumps & Compressed AirSalary: $80,000 - $140,000, based on experience -- draw plus uncapped commissionDepartment: Maryland Industrial DepartmentLocation: Annapolis Junction, MDReports To: Vice President Job Overview: Outside Sales Engineer activities include building customer relationships through face-to-face meetings and customer site visits; handling customer inquiries and coordinating quotations, proposals, aftermarket services, and other follow-up fo

Glen Arm, MD 21057 • (23 miles) • Full Time • 8/21/2026

Field Service Technicians are responsible forequipment installations, customer training, and technical support on-site to customers including customer plant personnel. This position requires proficiency in Mechanical abilities and troubleshooting.RESPONSIBILITIESProvide technical assistance to customers on-site for service and repair ofcorrugating and/or finishing equipment.Lead and/or participate in installation of machinery at customer sites.Provide training on operation and maintenance to the end-users of SUN equipment. Troubleshoot and repair complex field service issues; take ownership for solutions per company standards.Use discretion with regard to business related expenses, limiting them to those that are necessary and reasonable.Travel extensively domestically and as needed intern

Columbia, MD • (39.5 miles) • Full Time • 8/20/2026

Required: Top Secret Clearance with Fullscope PolygraphSoftware Engineer (Backend Application Engineer)Overview:This effort requires a candidate research and recommend technology to improve the current systems in support of organization's strategic vision. The candidate will be responsible for translating business requirements into specific systems, applications, data, or process designs for very large complex IT solutions and integrating architecture. The candidate will design, develop, and analyze overall architecture. The candidate will be expected to determine integrated hardware, software and data architecture solutions that meet performance, scalability, reliability, and security needs. The candidate will also lead on architectural governance and decisions related to Product, Technol

Forest Hill, MD • (19.5 miles) • Full Time • 8/17/2026

We are seeking adetail-oriented CADD Drafter to join our team. The ideal candidate will have experience in computer-aided drafting and design, and will workclosely withother BIM professionals to produce accurate and high-quality drawings. This role requires proficiency in CADD software, knowledge of BIM standards, and a strong understanding of construction documentation.Responsibilities: Create detailed 2D and 3D drawings using CADD software, ensuring accuracy and adherence to project specifications. Collaborate with BIM coordinators to develop design and construction documents. Interpret technical drawings, blueprints, and specifications to produce high-quality drafting work. Assist in maintaining and updating project documentation, ensuring compliance with company and industry standards.

Lancaster, PA 17602 • (29.2 miles) • Full Time • 9/13/2026

Woodstream is the largest independent pest & animal control platform in North America, offering innovative brands with industry-leading efficacy and safety.We have an immediate opportunity for a Mechanical Design Engineer II, New Product Development in Lancaster, PA.At Woodstream, our values drive everything we do:Consumer is the Boss – We are committed to listening to and understanding our customers’ needs!Invent the Future – Challenge the status quo: Think boldly and creatively!Execution is Everything – We are committed to deliver with excellence, speed, and accuracy.Collaborate Confidently – We trust, respect, and empower each other to win together.Play to Win – We’re bold, ambitious, and relentless in our pursuit of success.Benefits of Working for Woodstream:Competitive benefits packag

Mountville, PA 17554-1805 • (23.6 miles) • Full Time • 9/12/2026

Description: Abel Recon has an exciting new opportunity for a Field Technician/Rehabilitation Equipment Operator within the wastewater, stormwater and potable water rehabilitation industry. Abel Recon is headquartered in Mountville, Pennsylvania. Our projects are located across the Mid-Atlantic Region. “NO EXPERIENCE IS NECESSARY”, Abel Recon will provide the necessary training for you to be successful as you launch your new career. Field Staff get the exciting opportunity to travel frequently with all expenses paid.Key Responsibilities:Work on a wide range of projects, including structure rehabilitation, cured-in-place pipe lining (CIPP), CCTV inspections, and pipeline cleaning.Work with assigned field personnel, as directed to assist in the installation process of our pipe lining and spr

Strasburg, PA 17579 • (30 miles) • Full Time • 9/11/2026

Kleinschmidt has a full-time opening for a Project Engineer to support the design and construction of fish passage projects from our either of ourMaine and/or our Strasburg, PA offices. If you are interested in using your engineering background to work on important projects that make a real difference, then this may be the job for you. An ideal candidate would enjoy the challenge of combining sound engineering fundamentals with creative thinking to solve unique problems.Salary: $95,000 - $112,000 annuallyWho You AreA licensed Professional Engineer (or commitment to becoming one) with a BS or BScand a minimum of 6 years' experience in fisheries engineering or a closely related field. Previous experience with fisheries engineering work is preferred, but candidates with a structural (concrete

Lancaster, PA • (28.2 miles) • Full Time • 9/11/2026

Company Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate.The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics

Lancaster, PA 17601 • (29.3 miles) • Full Time • 9/11/2026

Description: Join our innovative thermal solutions team- named a Best Place to Work in PA!About UsAdvanced Cooling Technologies, Inc. (ACT) is a leading provider of thermal management solutions for aerospace, defense, data centers, energy, and industrial applications. For more than 20 years, ACT has engineered and manufactured innovative technologies that solve complex thermal challenges in demanding environments. Our team is driven by continuous innovation, teamwork, and collaboration, delivering reliable solutions that support critical missions and next-generation technologies worldwide.Position summary: The Product Development Engineer supports various phases of projects ranging from concept generation and initial design all of the way to final delivery hardware and volume production. T

Lancaster, PA • (28.2 miles) • Full Time • 9/10/2026

Business Unit Leader – Municipal EngineeringAEC Consulting GroupGreater Philadelphia (Hybrid)Senior Project Manager / Business Unit Lead - Municipal EngineeringMid-Atlantic Region | Full-TimeSalary Range: $165,000 - $210,000Location:Offices throughout the Mid-Atlantic (hybrid possibility for established in-state engineers)Our client, a well-established and growing multidisciplinary engineering and consulting firm with nearly 80 years of excellence, is seeking aSenior Project Manager or Business Unit Leadto oversee and expand their Municipal Engineering practice across multiple regional offices.This is astrategic leadership opportunitywith a clear path to executive-level advancement. The ideal candidate will bring a blend of technical expertise, operational leadership, and business developm