Fountain Inn, SC 29644 • (35 miles) • Full Time • 10/10/2026

Company Description Our drive and control technologies ensure efficient, powerful, and safe movement in machines and systems of any size. We inspire our customers with intelligent components, tailored system solutions, and services – from fully connected applications to the factory of the future. Bosch Rexroth is dedicated to making the world a better place through innovation and technology. We are looking for associates who will take on our customers’ challenges with passion and persistence until the right solution is found and who will thrive in a face-paced, collaborative, and exciting environment. Job Description The Mechanical or Manufacturing Engineering Co-op will assist with engineering projects in a manufacturing environment, gaining hands-on experience in product design, process

Greenville, SC • (27.5 miles) • Full Time • 10/10/2026

A leading nonwoven textiles manufacturer is seeking a Quality Engineer with 2–3 years of hands-on experience in nonwoven / extrusion-based nonwoven production or textile manufacturing quality. This role supports quality engineering activities to ensure consistent fiber and fabric performance across spunbond and/or meltblown processes. The Quality Engineer will work closely with production, engineering, and quality teams to monitor process performance, investigate quality issues, and drive continuous improvement initiatives. Experience with hygiene-grade nonwoven extrusion is highly desirable. Key Responsibilities Support quality activities across extrusion, fiber spinning, web formation, and bonding processes. Monitor and analyze textile performance characteristics including basis weight (

Greer, SC 29650 • (34.8 miles) • Full Time • 10/10/2026

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it’s what keeps us at the top of our game.We are solutions-based.We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it’s our people’s too:Refresco is at

Greenville, SC 29601 • (25.9 miles) • Full Time • 10/9/2026

ABOUT THE ROLE We are seeking a Sr. Process Engineer to join our team supporting Fluor on their Savannah River Plutonium Processing Facility (SRPPF) project! This position is full-time and will be based out of Greenville, SC. Responsibilities Conduct construction document reviews as required. Plan, organize, and coordinate process / mechanical engineering and multi-disciplined team / design projects while engaged in the planning, design, and construction phases of engineering projects including project startup. Prepare and review calculations and specifications relating to Piping and Instrumentation Diagram (P&ID) development. Demonstrate design experience in areas such as but not limited to mechanical systems and equipment design. Generate and review the accuracy of design / evaluation ca

Woodruff, SC 29388 • (44 miles) • Full Time • 10/9/2026

Sr. Manufacturing Engineer We are seeking an experienced Senior Manufacturing Engineer with 5+ years of hands-on technical leadership in assembly line design, tooling, equipment commissioning, and shop-floor digital systems. In this position, you will own the full equipment lifecycle from drafting User Requirement Specifications (URS) and designing custom jigs and fixtures in AutoCAD/3D CAD, to conducting Factory Acceptance Testing (FAT) / Site Acceptance Testing (SAT), line balancing, workplace ergonomics, and seamless Manufacturing Execution System (MES) integration. POSITION RESPONSIBILITIES- ESSENTIAL Equipment Spec-Out, Vendor Management & FAT/SAT: Develop technical User Requirement Specifications (URS), functional specs, and RFQs for automated, semi-automated, and manual manufacturin

Anderson, SC 29621 • (17.1 miles) • Full Time • 10/8/2026

Our client is a forward-thinking global manufacturer specializing in the design, development, and production of high-quality plastic components and assemblies for the automotive, industrial, and healthcare sectors. With advanced expertise in blow molding and injection molding, the company partners with leading global organizations to bring the vehicles, equipment, and products of tomorrow to life. Driven by innovation, sustainability, quality, and operational excellence, the organization is entering an exciting period of continued growth supported by significant capital investment, strategic acquisitions, and organic expansion. To support this growth, the company is seeking an accomplished Operations Manager to lead manufacturing operations at its facility in Anderson, South Carolina. This

Piedmont, SC 29673 • (20.4 miles) • Full Time • $30.00 to $35.00 / hr • 10/8/2026

Apply Here: https://secure.onehcm.com/ta/Halton.jobs?ShowJob=788661186 & TrackId=ZipRecruiter Company Description Grow your career with Halton Company! We are seeking a Manufacturing Supervisor at our Piedmont, SC facility. Halton provides medical, dental, and vision insurance at NO COST to our employees and their family. The company also offers a competitive 401K program, profit sharing bonuses, paid holidays, paid time off during your first year, tuition assistance, and much more. At Halton MEI USA, Inc. your wellbeing is our goal. Halton is a world-leading designer and manufacturer of high integrity fire dampers, blast dampers, and more. With over 35 years of experience, our knowledge has been gained by supplying the world's largest companies in the oil & gas, power generation, nuclear,

Pelzer, SC 29669 • (22.8 miles) • Full Time • $25.00 to $27.00 / hr • 10/8/2026

CNC MILL PROGRAMMER Capable of PROGRAMMING AT MACHINE from DRAWING WITH FANUC CONTROLS USING G & M CODES.. 1ST SHIFT....Monday thru Friday, 7am -3:30PM Pay depends on experience but starting at $25.00 AND UP FOR SELF SUFFICIENT PROGRAMMER.

Greenville, SC • (27.5 miles) • Full Time • 10/8/2026

RMF Engineering is an innovative, top-ranked, national engineering firm that specializes in providing design and engineering services for all aspects of building and utility infrastructure construction. RMF offers a balanced benefits package that centers on a stable and professional working environment which includes above standard health and dental insurance, paid holidays, paid vacation, and 401K plan. Description: RMF Engineering, Inc is seeking is currently seeking an Electrical Project Engineer in one of our South Carolina offices (Charleston, Columbia, Greenville). The Project Engineer's primary role is to manage all aspects of complex design projects involving medium and low voltage electrical systems, power generation and power distribution. Requirements Required Qualifications: Ba

Anderson, SC 29621 • (17.1 miles) • Full Time • $22.00 / hr • 10/7/2026

Production Welder Objectives: Qualified individual will work as a team for welding fabricated metal products. Position requires successful completion of a welding test administered according to company guidelines. Tasks: This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. Must be personally responsible and committed to the quality of one's own work. Must be able to work above production standards. Welds or tack welds metal parts together, using MIG (GMAW) welding equipment. Weld components in flat, vertical, or overhead positions. Must be able to use grinders or sanders as needed to metal finish parts and or assemblies prior to paint. Positions and secures work pie

Greenville, SC • (27.5 miles) • Full Time • $93,204 to $158,417 / yr • 10/7/2026

Description Sound like your next move? You’re a Senior Electrical Engineer in Greenville, SC ready to do work that actually makes an impact You enjoy tackling complex challenges and bringing thoughtful solutions to Healthcare design projects You’re confident owning your workfrom developing detailed plans to running calculations and building accurate cost estimates You’re known for being organized, detail-driven, and someone your team can always count on You’re looking for more than just a jobyou want growth, ownership, and real career momentum At HEAPY, you won’t just design systemsyou’ll help shape environments that truly matter. If the idea of growing your expertise while contributing to critical healthcare spaces excites you, this might be exactly what you’ve been looking for. Key Respo

Simpsonville, SC • (31.7 miles) • Full Time • 10/6/2026

Company Description Xyant Technology, established in 1995, is a premier federal systems integrator that provides technical and business solutions in information technology, systems engineering, scientific support and management consulting. AWARDS Winner of Nationwide Best of the Best Small Business Award from Federal Aviation Job Description Please send your updated resume to vinoth.xyant@gmail. com or apply online. Job Description: Position: AS9100 Quality Manager Location: Simpsonville, SC (Onsite) Duration: 6 Months Contract Direct Client Need Schedule: 8:00 am - 4:30 pm EST Possible temp to perm position for the right person and dependent on business needs Interview Preference will be virtual Responsibilities Develop partnerships with senior managers, IPTs, customers, and quality funct

Liberty, SC • (9.9 miles) • Full Time • $110,000 to $140,000 / yr • 10/6/2026

Description The Process Engineering Manager is a key member of the Knowles, Cornell Dubilier site leadership team. This role builds and leads the Process Engineering function that delivers safe, stable, capable, and scalable manufacturing processes. You will own process strategy, talent development, and the deployment of rigorous engineering methods that improve safety, quality, delivery, cost and innovation across the factory. Key Responsibilities Leadership & Strategy Develop and manage a highperforming organization of Engineers and Technicians; set vision, standards, and career paths. Establish an engineering operating system with clear cadences, gemba presence, and actionoriented problem solving. Create visibility to critical metrics (project funnel/status, Cp/Cpk, FPY, OEE, yield/scra

Greenville, SC 29601 • (25.9 miles) • Part Time • 10/5/2026

POSITION SUMMARY The Director of Production will oversee all technical aspects of the Production Departmentincluding:Backstage operations, use and maintenance of production equipment and facilities; build and sustain a strong production team through recruiting, training, and evaluating all production department employees. Direct andfacilitatethe production of shows,performancesand events at The Peace Center. ESSENTIAL DUTIES Lead a strong, effective, and efficient Production team. Direct reports include one (1) full-time production manager, six (6) full-time IATSE department heads, and contracted part-time stage crew based on the needs of visiting productions.? Liaison between The Peace Center andcontractedstagehand provider. Schedule and supervise contract labor to include instructing,pla

Anderson, SC 29625 • (9.3 miles) • Full Time • 10/4/2026

Project Engineer - Plant Join Our Team We are seeking a hands-on Project Engineer to lead capital equipment, facility improvement, and new product launch projects in a fast-paced manufacturing environment. This role is ideal for an engineer who enjoys managing projects from concept through implementation while working closely with Operations, Maintenance, Quality, and Production teams to improve safety, efficiency, and plant performance. What You'll Do Lead capital equipment and facility improvement projects from planning through implementation. Coordinate equipment installations, plant upgrades, infrastructure improvements, and layout changes. Support new product launches, equipment startup, commissioning, and validation activities. Develop project scopes, budgets, schedules, and technica

Greer, SC 29651 • (37.9 miles) • Full Time • 10/3/2026

TRIGO Global Quality Solutions is seeking to fill a Quality Manager position in Greer, SC. Overall Purpose The Quality Manager is responsible for ensuring a company's policies and procedures comply with regulatory and ethical standards. Quality Manager will be required to travel within the area to perform regular audits, implement company policies, and design control systems. The Quality Manager will perform duties at the professional level in some or all of the following functional areas: quality operating system functions, ISO/IATF/AS Technical Specification, employee relations, training, etc. Maintain proper company documentation. Must be sensitive to company needs, employee goodwill, requirements/goodwill, and industry standards. May Report to General Manager Responsibilities Client re

Simpsonville, SC 29680 • (29.6 miles) • Full Time • 10/2/2026

Description: Want to build a career in manufacturing? Are you looking for a safe, clean, and positive work environment? Join a growing team with a company that invests in its people and promotes from within. American Plastics is a leading supplier of injection molded products with multiple facilities in 4 states. About the Position : As a Production Operator, you will play a vital role in the production, inspection and packaging of every great product that leaves our facility. You will make retail storage and janitorial products that you and your neighbors rely on every day. Available Shifts: Days: 6am – 6pm Nights: 6pm – 6am Duties & Expectations on the Job: Run a safe, clean operation which promotes zero accidents. Lift and remove parts from conveyor line. Maintain product specifications

Greenville, SC 29609 • (28.7 miles) • Full Time • $23.00 to $35.00 / hr • 9/30/2026

Are you a skilled Foreman, Team Lead, or an experienced Maintenance Technician ready to take the lead in a dynamic role? K&P Dock Door & Maintenance, a growing leader in the industrial and commercial door solutions, is seeking Foreman/Lead types to join our dedicated team. If you excel at troubleshooting, repair, and maintenance in fast-paced environments, we can talk to you! What You'll Do: Lead a team in the diagnosis, repair, and installation of dock doors, overhead doors, and industrial door systems. Perform expert troubleshooting on mechanical and electrical components to ensure optimal functionality. Maintain the highest safety standards, consistently utilizing Personal Protection Equipment (PPE) and steel-toed shoes. Uphold a reputation for professionalism and exceptional service, p

Greenville, SC 29615 • (31.7 miles) • Full Time • 9/30/2026

Controls & Instrumentation Lead WHO WE ARE: Jedson Engineering is an Engineering Consultancy headquartered in Cincinnati, OH. We provide full-service engineering, procurement and construction management services to industrial process manufacturers that operate in pulp & paper, chemical, power & delivery, heavy industrial, consumer product and food & beverage market. We are in a significant growth mode and it’s an exciting time to be joining our business! WHAT YOU’LL BE DOING: We’re looking for an experienced Controls & Instrumentation Lead to help lead and manage a project scope. This role will work directly with the clients to understand the project needs, and help manage and direct the execution of the engineering deliverables. Develop and document the scope of work Size and specify inst

Greenville, SC 29601 • (25.9 miles) • Full Time • 9/29/2026

At Optima Engineering , an employee-owned MEP engineering consulting firm, we focus on delivering high-quality mechanical, electrical, plumbing, fire protection, and technology design solutions for buildings across the Southeast. Our projects include higher education, municipal, K-12, and commercial facilities. We are looking for a skilled and dedicated Electrical Engineer to join our team and help us continue to provide thoughtful and efficient designs for our clients Requirements Registration as a Professional Engineer (PE) in South Carolina Bachelor’s degree in Electrical Engineering or related field. Minimum of 5 years of experience in MEP building systems design for higher education, municipal, K-12, and/or commercial facilities. Proficiency in Revit and/or AutoCAD required. Strong co

Greenville, SC 29615-6623 • (27.5 miles) • Full Time • 9/28/2026

Description: Davis & Floyd is seeking a Water Resources Designer III to join our Greenville or Florence, SC team! The Water Resources Designer III is responsible for supporting engineering staff in the design development of complex civil projects and serving as an advanced technical resource within the CAD team. Working under the general direction of engineers, project managers, and discipline leads, this candidate will independently develop project drawings and construction documents, assist in evaluating project feasibility, coordinate CAD production efforts, and generate accurate and detailed engineering records. The CAD Technician III is expected to exercise considerable independent judgment, perform advanced drafting and design support functions, and assist with mentoring junior techn

Greenville, SC 29607 • (28.6 miles) • Full Time • $25.00 / hr • 9/27/2026

About Us: X-Ray Industries , an Applus+ company, is a well-established non-destructive testing service provider in the Aerospace industry. With over 80 years of experience, X-Ray Industries is the oldest, most-established NDT provider, offering a broad range of testing and inspection capabilities. Position Overview A nondestructive testing (NDT) Level 2 shall have the skills and knowledge to set up and calibrate equipment, to conduct tests, and to interpret, evaluate, and document results in accordance with procedures approved by the Level 3 with respect to applicable codes, specifications, and standards. The level 2 shall be thoroughly familiar with the scope and limitations of the test method and shall exercise assigned responsibility for on-the-job (OJT) training and guidance of trainee

Gray Court, SC 29645 • (39.6 miles) • Full Time • 9/27/2026

Sheet Metal Fabricator CCS Elite Fab, LLC – Gray Court, SC Full-time | $14.00 - $30.00 per hour About Us CCS Elite Fab, LLC is a premier fabrication shop specializing in high-quality, custom chimney caps. We take pride in our craftsmanship and are looking for dependable, motivated individuals to join our growing team in Gray Court. Why Join CCS? We don't just offer a job; we offer a career path. We value reliability and performance, rewarding our team members with consistent raises as they master their craft. Compensation & Career Growth Starting Pay: $14.00 per hour. Fast-Track Review: Your first performance evaluation occurs after just 30 days , with immediate opportunities for wage increases based on skill development. Top-Tier Earning: Our experienced fabricators earn up to $30.00 per

Greenville, SC 29615 • (31.7 miles) • Full Time • $18.00 / hr • 9/26/2026

Looking for a steady, hands-on role where you can focus on detailed work, listen to your own music or favorite podcast, work alongside a close-knit team, and still be home every evening? Apply today to join Circuit Board Medics in Greenville as a full-time Circuit Board Repair Technician and become part of a people-first company that values consistency, craftsmanship, and the individuals behind the work. Job Overview Title: Circuit Board Repair Technician (entry level) Employer: Circuit Board Medics is familyowned, ~100 employees, one location Location: Greenville, SC 29615 (on-site, temperaturecontrolled production floor) Schedule: Full-time | Monday - Friday, 1st Shift Pay: Starting at $18.00/hour (hourly, full-time) Why This Feels Different (culture and perks you actually feel) Friendly

Travelers Rest, SC 29690-8495 • (28.8 miles) • Full Time • $25.60 to $34.20 / hr • 9/25/2026

Description: CNC Lathe Machinist ALL SHIFTS AVAILABLE Job Description: The CNC Lathe Machinist is responsible for running and maintaining multiple multi-axis CNC machines. With tolerances to 0.0005”, each machinist will complete regular quality checks, control scrap and productivity, and manage set-up and tool changes. Materials processed include Stainless Steel, Titanium, Aluminum, and Delrin. This role will be responsible for raw material loading, housekeeping, and be flexible for assignment changes, occasional overtime, and other duties as required. Pay & Benefits for a CNC Lathe Machinist: Pay: Hourly non-exempt position 3 tiered wage bands, shift premiums for Night shift and Weekend shift Benefits: Paid Time Off (PTO) Holiday Pay Health, vision, dental, disability insurance, and accid

Greenville, SC 29601 • (25.9 miles) • Full Time • 9/24/2026

Our client, a global manufacturer is seeking a Materials & Planning Manager to lead production planning, inventory control, warehouse operations, and material readiness within a growing manufacturing environment in Greenville, SC . This is a hands-on leadership role focused on improving operational execution, developing the team, strengthening processes, and ensuring materials are available to support production. The position reports to the Senior Operations Manager and will lead the Production Controller and Warehouse Supervisor, with broader oversight of the materials and warehouse team. Key Responsibilities Lead production planning and develop achievable schedules based on capacity, material availability, and operational constraints Monitor schedule attainment and coordinate recovery ac

Greer, SC 29651 • (37.9 miles) • Full Time • 9/24/2026

One Company, One Driving Force. With a rich history dating back over 45 years, Plasman is a leading global automotive and manufacturing company with several locations across North America and Europe. At Plasman, you will work with the world's best and brightest to shape the future of our global company. Our employees come from rich and diverse backgrounds working collectively together for the success of one company. We believe the most impressive thing we’ve built is our workforce. And together, we will accomplish more than ever imagined. We are Plasman. And we are One Driving Force. Plasman is currently seeking a new member to join our team as a(n): Injection Mold Setter Key Responsibilities Safely operate PIT's and overhead crane in order to deliver/install materials/molds to the injecti

Greenville, SC 29615 • (31.7 miles) • Full Time • 9/23/2026

Job Title: Tool Design Engineer About the Role We are seeking a Tool Design Engineer to design and develop tools, equipment, and systems. In this role, you will conduct research applying principles of mechanics, thermodynamics, heat transfer, and materials. A key focus will be implementing sound design for manufacturing principles to produce the simplest, most cost-effective products to meet our end market's needs. Key Responsibilities Create and develop tooling for pulp products, which includes developing Solidworks models and manufacturing drawings, specifying manufacturing processes, developing bills of material, and assembling, testing, and evaluating tooling. Evaluate designs regarding cost, manufacturability, serviceability, ergonomics, safety, and compliance with specifications. Exe

Travelers Rest, SC 29690 • (34.2 miles) • Full Time • $27.00 to $34.00 / hr • 9/22/2026

JOB DESCRIPTION Position title: Process Technician Reports to: Shift Supervisor Location: PVNA Position level: Plant Management: No direct reports Department: Molding Purpose of the job The Process Technician is responsible for setting up, processing, and qualifying precision parts while monitoring production to ensure quality, safety, and efficient machine performance. Main Responsibilities Monitor production lines. Verify that materials match the bill of materials (BOM). Set cycle times to support standard efficiency. Verify component material part numbers against the production BOM. Complete logbook entries and communicate shift issues during pass-down. Set up, repair, and troubleshoot machines to produce quality parts. Stop presses for color changes and purge remaining material in acco

Piedmont, SC 29673 • (20.4 miles) • Full Time • 9/22/2026

TRC Talent is looking for a Quality Inspector for our client in Piedmont, SC! Job Summary: We are seeking a detail-oriented and quality-focused Quality Inspector to support manufacturing operations within a fulfillment center environment. The ideal candidate will have experience in manufacturing or quality inspection and will be responsible for ensuring bottles, containers, and packaging components produced through extrusion blow molding meet company standards, customer specifications, and regulatory requirements. Job Details: Monday-Friday, 2PM-10PM (training will be 10AM-6PM) Temp to Hire $22/hr+ based on experience Key Responsibilities: Perform visual and dimensional inspections of bottles, containers, and packaging materials to identify defects or inconsistencies Use calipers, gauges,

Greenville, SC • (27.5 miles) • Full Time • 9/22/2026

Power the Future of Energy: Manufacturing Engineer IV (Senior CNC Programmer 2nd Shift) Join PDS Tech Commercial in Supporting a World-Renowned Innovator in Power Generation and Energy Technology Looking to put your CNC programming expertise to work on some of the most advanced manufacturing equipment in the energy industry? This is your opportunity to contribute to cutting-edge technologies that help power communities around the world. We're seeking an experienced Senior CNC Programmer to support a global leader in energy innovation at their Greenville, SC facility. At a Glance Location: Greenville, SC | Onsite Schedule: 2nd Shift Pay Rate: $62.58/hr Make an Impact As a Senior CNC Programmer, you'll play a critical role in developing, optimizing, and supporting advanced machining processe

Greenville, SC • (27.5 miles) • Full Time • 9/22/2026

Job Posting: Quality Assurance Analyst - Project Lead 7615. Candidate Location: Must be a CURRENT SC resident. No Relocation allowed. Work Location: Hybrid (4 days in office, 1 days remote). Employment Type: W2 only, no subcontractors. we can't work on a corp-to-corp basis; we will pay $5.00 an hour for the referral. Must be able to work on a W2 basis. No H1s or F1s allowed, as we don't sponsor visas. Our direct client is seeking experience. Project Manager for a 12-month contract the location is in Columbia, SC. Bachelor’s degree in a technical, business, healthcare or related field. Years of experience can substitute for formal education. Technical and/or Project Management certifications from recognized sources are desirable but not required. 5 years translating business requirements or

Duncan, SC 29334 • (41.8 miles) • Full Time • 9/22/2026

Company Description Stubli is a value driven technological solutions provider with four dedicated activities: Electrical Connectors, Fluid Connectors, Robotics and Textile. We strive for innovation and excellence and are market leaders in many industrial segments. Stubli guarantees high quality, reliability, and performance - our strong basis for the trusted partnership with our customers worldwide. Job Description Job Function: We are looking for a passionate Electrical Engineer to help shape the next generation of innovative robotic tool changer systems. In this role, you will combine electrical design with hands-on testing, validation, and the development of automated test equipment. Working closely with global R&D teams, you will play a key role in bringing new technologies from concep

Easley, SC 29642 • (15.4 miles) • Full Time • $20.00 to $28.00 / hr • 9/21/2026

Position Summary Daedalus Industrial is seeking a skilled Electrical Panel Builder Technician to join our shop-floor team. In this role, you will build industrial control panels from bare enclosure to finished, tested assembly - working from engineering drawings and bills of materials to produce high-quality, code-compliant panels for our automation and controls customers. You will own every phase of the build process and are expected to work with a high level of craftsmanship and attention to detail. Key Responsibilities Read and interpret electrical schematics, wiring diagrams, and panel layouts (EPLAN or equivalent) Lay out and mount enclosures, backplates, DIN rails, cable trays, and sub-panels Install and wire PLCs, I/O modules, drives (VFDs), HMIs, relays, contactors, and terminal bl

Greenville, SC 29605 • (25.4 miles) • Full Time • 9/21/2026

The Controls Engineers at Koops design, develop, and debug control systems for primarily end of line Packaging automation equipment across a wide range of industries. We’re looking for a talented, creative, and self-motivated engineer to join a highly collaborative team where problem-solving, creativity, and a strong team dynamic drive success. What You’ll Do Design, develop, and debug control systems for end of line packagingequipment Program and troubleshoot PLCs, HMIs, robots, and motion control systems Develop electrical layouts and detailed schematics using CAD software Integrate sensors, pneumatics, and vision systems into automation solutions Collaborate cross-functionally with mechanical, project, and build teams Work directly with customers to understand requirements and deliver s

Mauldin, SC 29662 • (29.5 miles) • Full Time • 9/21/2026

CompX National is hiring a Swiss Lathe Machinist on our 3rd Shift. Visit the following link to learn more about CompX National: CompX National – CompX Security Products Be part of our CompX National team and enjoy our excellent benefits: Medical Insurance (FREE employee) Dental Insurance Vision Insurance LOW deductible and LOW out of pocket max Flexible Spending Accounts (FSA) 401k Retirement Plans Company paid Disability and Life Insurance Paid vacations and Holidays Tuition Reimbursement Referral Reward Program Shift: 3rd Shift: 10:30 PM - 7:00 AM Sunday - Thursday Pay Range: $21.42 - $28.25 per hourDOE Shift Premium: $2.50 per hour Position Responsibilities: Setup and operate Swiss Lathe in a team environment. Capable of maintaining excellent quality and high efficiency in a fast-paced

Easley, SC 29640 • (19.4 miles) • Full Time • 9/20/2026

Painter Easley, SC location Pay range $18-$19 depending on skill/experience **Please monitor your email for communications regarding your application** No phone inquiries please Essential duties and responsibilities: Paint Test Required prior to hire Prepping andmixing paint Paint with correct color and thickness to meet quality standards. Powder coat paint/bake correct color and thickness to meet quality standards. Problem solving any issues that may arise. Painting steel racks with electrostatic spray guns. Provide strict attention to detail and quality to ensure racks are painted with correct color and thickness. Clean work area and 5S daily. Other duties as assigned. Minimum Experience and Qualifications: Education: None Required Experience: Previous Powder Coat Experience Preferred Be

Greenville, SC 29607 • (28.6 miles) • Full Time • 9/20/2026

Summary: Bonitz, Inc. is looking for a full time, dynamic Foreman who has the capacity to lead and influence both internally and externally. The successful candidate will have the ability to develop and sustain long-term relationships with general contractors, architects, designers, owners, end users, and internal team members. This person is an expert at learning and understanding the industry and manages overall implementation of multiple projects, safely and with high quality. Overview: Founded in 1954, Bonitz, Inc. is an Employee-Owned Company operating as specialty trade commercial contractors servicing the construction industry. Bonitz designs and installs custom flooring, walls, ceilings, and cladding systems. We offer access, terrazzo and other specialty flooring as well as floor c

Westminster, SC 29693 • (19.4 miles) • Full Time • 10/17/2026

US Engine Valve is seeking a motivated and detail-oriented Quality Engineer to support and maintain our Quality Management System. This role is ideal for a candidate who enjoys analyzing production and laboratory data, investigating deviations, and driving corrective and preventive actions to eliminate quality issues and prevent recurrence. The successful candidate will be a collaborative, team-oriented professional who works effectively across multiple departments. This individual will play a key role in identifying trends, improving processes, and ensuring product quality, consistency, and compliance with internal and external standards. Key Responsibilities: Able to read and understand blueprints and technical literature. Support investigations into customer defects and nonconformances

Westminster, SC 29693 • (19.4 miles) • Full Time • 10/8/2026

Position Summary The Manufacturing Engineer is responsible for developing, evaluating, and continuously improving manufacturing processes to enhance safety, quality, productivity, and cost efficiency. This role applies engineering principles and technical expertise to optimize production methods, equipment, tooling, and workflow while supporting a lean manufacturing environment. The Manufacturing Engineer collaborates closely with Operations, Quality, Engineering, and Supply Chain teams to ensure efficient and effective manufacturing processes that meet business objectives. Key Responsibilities Analyze manufacturing processes and implement improvements to increase efficiency, reduce waste, and optimize production performance. Evaluate workforce utilization, workflow, equipment placement, a

Simpsonville, SC • (31.7 miles) • Full Time • $18.60 to $21.44 / hr • 10/2/2026

Dicing Operator - Temp to Hire Location: South Simpsonville, SC Pay: $18.60 - $21.44 Job Summary We are seeking a detail-oriented Dicing Operator to join our manufacturing team in the South Simpsonville, SC area. The Dicing Operator is responsible for operating and maintaining Baker dicing equipment, performing quality inspections, completing required production documentation, and ensuring products meet established specifications. This role requires strong attention to detail, adherence to safety procedures, and the ability to work collaboratively in a fast-paced manufacturing environment. Key Responsibilities Operate Baker dicing equipment to process materials according to production requirements and quality standards. Load, unload, clean, and prepare blocks for processing. Inspect blocks