Crossville, TN • (5.3 miles) • Full Time • 10/1/2026

What is the Job?Keeping our hotel running smoothly is vital to our guest's experience – as Maintenance Engineer you’ll keep everything looking sharp and running like clockwork. From simple repairs to forward-thinking for the next day. With naturally high standards to support our own, you’ll approach every task with devotion and pride.Your day to day:Repair or replace items around the hotel and refurbish items in guest rooms. By keeping on top of these tasks, you’ll keep our hotel looking great and working well.Organize supplies and make sure equipment is ready for the next day.Be able to uphold safety standards – follow guidelines and tell your supervisor about any incidents, dangerous conditions or unsafe equipment.Take responsibility for the safety and cleanliness of areas inside and out

Knoxville, TN 37932 • (43.7 miles) • Full Time • 9/30/2026

GIG Integr Water Res Mgmt / Generation Industrial & GovernmentThis position is not eligible for recruiting or sourcing by outside parties.Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels.We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa

Dayton, TN 37321 • (26.8 miles) • Full Time • 10/11/2026

POSITION PURPOSEA Machine Programmer is both technical and strategic, with a strong focus on optimizing material use and reducing waste. They play an important part in ensuring that the production process is cost-effective and efficient by creating layouts that maximize the use of sheet metal. Additionally, their ability to understand blueprints and work closely with engineers and production teams is crucial for translating design specifications into machine-readable programs that ensure accuracy and smooth manufacturing.Leads and demonstrates BAC’s values of Earning Trust, Embracing Responsibility, Showing Courage, and Driving Innovation. The Machine Programmer will also be required to train and mentor junior programmers and assist the department leadership team with daily assignments as

Oak Ridge, TN • (38.5 miles) • Full Time • 10/11/2026

The role Magnet power supplies, cryogenic temperature monitors, and level meters connect to customer test environments over serial, USB, and Ethernet, and more of that traffic moves onto a network every year. This role owns the software that makes it work, from the firmware running on the microcontroller to the driver running on the customer's PC. You'll be the technical authority on firmware architecture, microprocessor and module integration, connectivity, and product cybersecurity. Where outside specialists make sense, you decide that and direct the work rather than absorbing all of it yourself. You'll report to the Engineering Manager and work day to day with our electronics engineer, applications engineers, and service group. Parts of our firmware have been maintained by capable gener

Oak Ridge, TN 37830 • (38.6 miles) • Full Time • 10/11/2026

MS Technology, Inc. is seeking aMechanical Engineerto support our client in Oak Ridge, TN.Summary: This role utilizes parametric 3D modeling tools such as CREO or SolidWorks. The Mechanical Engineer supportsscopes of work associated with components, assemblies, and machines within the project, providing technical expertise to help achieve program goals and objectives while ensuring compliance with established standards and practices.Location:Onsite in TennesseeSalary Range:Depending on ExperienceResponsibilities:Assist in leading, designing, building, and troubleshooting the following Plant expansion activitiesLarge scale heating and cooling systemsHigh vacuum systemsFiltration systemsHelium leak detection equipmentComposite parts and assembliesMachined parts and assembliesAssist in design

Knoxville, TN 37932 • (43.7 miles) • Full Time • 10/10/2026

Ardurra is seeking a Senior Traffic Engineer/Project Manager in our Knoxville, TN office!We are seeking aSenior Engineer/Project Managerwith strong experience in traffic engineering and transportation planning to lead a variety of local and DOT projects. This role will oversee traffic planning / operational studies and traffic design, including signalization, roadway lighting, signing and pavement marking, temporary traffic control, and ITS. The ideal candidate will be a collaborative leader, mentor junior staff, and work closely with clients and stakeholders to deliver high-quality, context-sensitive solutions.Primary Function:You’ll lead, plan, budget, and deliver traffic engineering projects, including traffic studies, signal design, ITS design, signing and pavement marking, and constru

Sparta, TN 38583 • (26.2 miles) • Full Time • 10/10/2026

Extrusion/Production Engineer and ManagerTACO Metals | Sparta, TN | Plastics ManufacturingReady to Take Ownership of the Extrusion Floor and Grow Into a Key Leadership Role? TACO Metals is looking for a hands-on Extrusion/Production Engineer and Manager to join our Plastics Manufacturing team in Sparta, TN. This is a high-impact growth opportunity for someone who knows extrusion, enjoys solving problems at the machine level, and is ready to develop into a larger leadership role. You will work closely with our current Plastics Extrusion Engineer and Plastics Production Manager while building the technical, operational, and leadership skills needed to help carry the department into the future. This is not a desk-only engineering role. We need someone comfortable on the floor, who understands

Sparta, TN 38583 • (26.2 miles) • Full Time • 10/9/2026

Job Summary:The Manufacturing Engineer is responsible for supporting daily production operations through hands-on interaction with manufacturing equipment, troubleshooting issues, maintaining SQL and Ignition databases and assisting with process improvements. This role focuses on maintaining equipment performance, supporting production efficiency, and implementing solutions to meet customer and business requirements.The position works closely with engineering, production, and maintenance teams to ensure equipment and processes are operating safely, reliably, and efficiently.Major Responsibilities/Activities:Monitor and troubleshoot manufacturing equipment and systems to support daily productionPerform routine equipment setup, adjustments, and changeoversAssist in the installation and start

Oak Ridge, TN 37831 • (38.2 miles) • Full Time • 10/9/2026

We are seeking an entry level engineer who has a desire to learn and grow in the exciting field of HVAC Controls and Building Automation Systems (BAS) to join our Federal Systems team supporting the Oak Ridge National Laboratory and the Y-12 National Security Complex on a full-time basis. The role will start as a Field Controls Technician to learn the equipment and systems in the field. ORNL offers an environment with many unique systems that primarily integrate in to our Metasys control system. ORNL is home to some of the worlds fastest supercomputers and our Metasys system is responsible for cooling the computers, as well as central chiller plants and boiler plants that feed utilities site wide. Y-12 has more than 100 buildings on site ranging from chiller plants to general office spaces

Oak Ridge, TN 37831 • (38.2 miles) • Full Time • 10/9/2026

Job Title: Electrical Commercial Grade Dedication Engineer, Nuclear Location: Oak Ridge, Tennessee Type: Direct Hire Work Model: OnsiteResponsibilities:Execute and implement Commercial Grade Dedication (CGD) plans to support Safety Related (QL1) procurements. Design, fabricate, and implement test setups to fulfill rigorous testing requirements. Develop and assist in the creation of test plans, including conducting specialized tests for commercial grade dedication purposes. Carry out failure analysis and repairs on electronic instrumentation and control (I&C) systems. Conduct seismic testing utilizing a Triaxial Seismic Testing machine, as well as environmental testing in alignment with established test plans. Coordinate and oversee special inspections conducted by other organizations or of

Oak Ridge, TN • (38.5 miles) • Full Time • 10/9/2026

Navarro Research and Engineering is recruiting for a Senior Mechanical Design Engineer in Oak Ridge, TN.Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense.We are seeking a Senior Mechanical Design Engineer who specializes in designing and optimizing piping and mechanical systems within process-control

Oak Ridge, TN 37830 • (38.6 miles) • Full Time • 10/9/2026

COMPANY OVERVIEWXCEL Engineering, Inc. is an award-winning small business that provides trusted information technology, engineering, consulting and project management solutions and services to federal agencies and organizations. Originally founded in 1971 by professional engineers at the University of Tennessee, XCEL was acquired in 2003 by U.S. Army and Navy veterans and in 2023 became a MartinFed company.XCEL Engineering is a part of IT Lab Partners (ITLP) which was created to support a leading research facility in the East Tennessee region in recruiting the best and the brightest technical talent. Consider joining our impressive team today!JOB OVERVIEWXcel Engineering is seeking qualified applicants for a Linux and Windows Systems Engineer to design, install, configure and maintain syst

Kingston, TN 37763 • (27.4 miles) • Full Time • 10/8/2026

Description: Exempt position for a degreed Engineer. Responsible for the configuration, documentation, and maintenance of plant process control and data management systems in compliance with regulatory and quality standards.Duties· Responsible for process control systems including:Air pollution control & treatment systems;Thermal (combustion) systems;Mechanical - process piping and equipment (e.g. pumps) and process instrumentation.· Program process logic and man-machine interface software.· Manage subcontracted engineering and construction personnel. Prepare detailed scope and performance specifications per company standards. Prepare and maintain detailed budgets/schedules for procurements.· Update and maintain engineering drawings and facility documentation for regulatory permit submitta

Oak Ridge, TN • (38.5 miles) • Full Time • 10/8/2026

Overview The Cognizant System Engineer/Technical Authority (CSE/TA) is responsible for ensuring the operability, reliability, and configuration integrity of assigned plant systems. This role provides technical leadership, system expertise, and oversight for system health, performance, and maintenance activities in accordance with established Configuration Management standards. The CSE/TA collaborates closely with multidisciplinary engineering teams to resolve technical issues and implement system improvements.Key ResponsibilitiesServe as the Cognizant System Engineer/Technical Authority for assigned systems, maintaining overall technical responsibility for system operability, reliability, and performance.Coordinate and execute configuration management activities, ensuring system documentat

Crossville, TN • (5.3 miles) • Full Time • 10/7/2026

Our Company Whisper Aero is pioneering a more compelling and connected future by delivering cleaner, quieter, and more efficient propulsion solutions. Today's open rotor propulsion systems are challenged by safety, noise, and performance limitations at all scales. Whisper's breakthrough technologies allow aircraft to fly anywhere at any time without disturbing communities, at greater speeds, and with incredible improvements in efficiency and cost. Their innovations also enable a new generation of air moving products that can blend into the soundscapes of daily life. Whisper was founded by industry veterans, Mark Moore and Ian Villa, and continues to innovate a future that's as considerate as it is compelling with its world-class team in Tennessee.About The RoleWhisper Aero is seeking an e

Oak Ridge, TN 37830 • (38.6 miles) • Full Time • 10/3/2026

OVERVIEWPROCESS is currently seeking multiple senior level Process Design Chemical Engineers for executing process design and process engineering projects across a variety of industrial market segments. Design assignments are expected to be primarily in the Oak Ridge, TN office but may require some occasional on-site plant data collection work in other locations across the U.S. as a senior engineer (LOCATIONOak Ridge, Tennessee (25 miles from Knoxville)JOB REQUIREMENTSB.S. in chemical engineering from an accredited universityAdvanced degrees (M.S. or M.B.A.) and professional registration are a plus but not required.A minimum of 10+ years of process design, process simulation development, and project management experience.Must be well versed in typical chemical process engineering deliverab

Oak Ridge, TN • (38.5 miles) • Full Time • 10/2/2026

OverviewWe’re hiring a Quality Engineer & Manager to lead quality planning, execution, and overall quality performance for complex, close-tolerance components and fabricated assemblies supporting critical aerospace and defense programs.This is a hands-on aerospace quality leadership role supporting large CNC-machined components, complex fabrications, and highly controlled manufacturing processes where documentation, traceability, dimensional compliance, and customer requirements are critical. You’ll have significant ownership of the site’s quality function while remaining directly involved in the engineering workfrom initial contract and drawing review through manufacturing, inspection, First Article Inspection (FAI), customer source inspection, and final delivery documentation.You’ll work

Cookeville, TN 38501 • (39.1 miles) • Full Time • 10/2/2026

Are you an engineer who enjoys figuring out how things should work, solving manufacturing problems, and turning ideas into practical equipment solutions?ATC Automation is looking for a Junior Applications Engineer – Automation & Concept Development to join our team in Cookeville, TN.This is an excellent opportunity for an early-career engineer who wants to build a career in custom industrial automation. You will work alongside experienced Applications Engineers, Mechanical Engineers, Controls Engineers, Sales professionals, and customers to develop concepts for custom automation systems.You won't be designing the same product over and over. At ATC, every project is different.You'll review customer requirements, drawings, production processes, and cycle-time goals and help determine:How can

Cookeville, TN • (34.9 miles) • Full Time • 10/1/2026

CNC ProgrammerPay: $29.00–$34.00 per hourPosition SummaryMid-South Machine is seeking an experienced CNC Lathe Programmer and CNC Mill Programmer to join our machining team. This is a hands-on position in a job shop environment requiring the ability to independently program, set up, and machine a wide variety of precision components. The ideal candidate is detail-oriented, enjoys challenging work, and takes pride in producing high-quality parts.Schedule & Work EnvironmentFull-time, on-site positionDay shift: Monday–Thursday, 6:00 AM–4:30 PMOvertime available on Fridays and Saturdays as neededClimate-controlled facility (air conditioned and heated)Clean, organized machine shopJob shop environment with a wide variety of parts, materials, and production quantitiesResponsibilitiesProgram CNC l

Cookeville, TN 38506 • (33.1 miles) • Full Time • 9/26/2026

At G&L Tube LLC, a division of AeroFlow Technologies, we specialize in creating complex tube and duct assemblies using high-performance materials capable of withstanding extreme pressure, temperature, and chemical interactions. You can even find AeroFlow Technologies products aboard NASA’s Space Launch System and in the F-35 fighter jets. That’s the level of quality and innovation you’ll be part of when you join our team.We are seeking a NDT Technician that willreport directly to the Non-Destructive Testing (NDT) Manager. NDT Technician Level I performs basic Non-Destructive Testing (NDT) tasks such as staging work, moving product through the NDT process and miscellaneous support tasks. NDT Technician Level I will demonstrate the ability to interpret work orders and follow work instruction

Athens, TN • (36.4 miles) • Full Time • 9/25/2026

Plans and executes activities related with development, application, adherence, and maintenance of quality standards, customer satisfaction, and operating systems compliance. The preferred candidate will have direct Tier I and Tier II Supplier experience, focused in supporting OEM standards, including but not limited to the following customers: BMW, VW and MBUSIEssential Duties and Responsibilities:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.· Must have experience in meta

Oak Ridge, TN 37830 • (38.6 miles) • Full Time • 9/18/2026

Key ResponsibilitiesTravel to and between project sites to assist engineers and scientists in conducting field tests, data collection, and inspections for various projects, including DOE, DOD, and commercial contracts.Assist in the preparation of technical drawings, reports, and documentation using engineering software.Operate, maintain, and troubleshoot technical equipment, ensuring proper functionality during project execution.Perform routine fieldwork and inspections, ensuring accurate data collection and reporting to senior engineers.Follow established procedures and protocols to ensure compliance with safety, environmental, and project-specific standards.Collaborate with project teams to identify and resolve technical challenges during the project lifecycle.Flexibility required. Withi

Sparta, TN 38583 • (26.2 miles) • Full Time • 9/18/2026

What’s most important to you? Afast-paced, dynamic workplace with good teamwork?Having autonomy to grow your career?Or making a meaningful impact?How about all of the above?If you’re nodding, we are looking for you to join Team Rebo as aManufacturing Engineer!A BIT ABOUT USWe are Rebo, and we provide interior and exterior automotive and electronics lighting solutions – both traditional and new concepts that we are excited to design and make! We are developing new technologies which help drive the future of electric vehicles, including charge status indicators as well as using light in new ways to improve safety and design. The opportunities to solve both practical customer needs and deliver enhanced features are endless.Here, you'll discover that we aim to help turn your passion into a rew

Oak Ridge, TN • (38.5 miles) • Full Time • 9/17/2026

Title: Adjunct Faculty-Chemical Engineering TechnologyEmployee Classification: Adjunct FacultyInstitution:Roane State Community CollegeDepartment: Math ScienceCampus Location: Roane State Community College -Oak Ridge, TNJob SummaryTeach one or several courses in chemical engineering technology classes, including lecture and lab. Courses are at a very basic level, with only minimal prior knowledge of chemistry or mathematics expected of students. Some classes meet in the evenings, some meet during the day, and some meet on Saturdays. Courses may include: Industrial Equipment Technical Calculations Process Equipment Process Operations Process Control and Instrumentation Quality and Inspection Industrial Safety (OSHA Instructor Qualification required) Other related coursesJob Duties100% - Tea

Athens, TN 37303 • (36.3 miles) • Full Time • 9/15/2026

Overview Our client, a leading automotive tier-one supplier, is seeking an experienced Quality Engineer to join their team in Athens, TN. The company has over 60 years of experience as a worldwide leader in the design, engineering, and manufacturing of components and systems in the automotive sector.Why work here?Our client is a Global Tier 1 supplier with a multi-site U.S. footprint providing longer-term growth and mobility options. This role offers the opportunity to impact throughput, quality, cost, and overall plant performance in a visible way.Responsibilities The Quality Engineer will make sure products meet quality, safety and reliability standards set by the company as well as testing protocols, auditing manufacturing processes, and analyzing data. Responsibilities include but are

Oak Ridge, TN 37830 • (38.6 miles) • Full Time • 10/7/2026

Benefits:Flexible scheduleOpportunity for advancementProfit sharingThis Is Not Your Average Tech Job Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job ResponsibilitiesPerform a wide range of technical tasks including but not limited to: OS installations, hardware diagnostics, and software setupStru

Knoxville, TN 37932 • (43.7 miles) • Full Time • 10/6/2026

Job Responsibilities Our DC Power Technicians are responsible for performing field activities at telecommunication central offices, electric utility substations, and data centers. This position reports to the Operations Manager and will be assigned to work on projects for varying lengths of time in different states. Perform and lead battery and DC power plant installations and hot cut overs with limited supervisionPerform battery testing, preventative maintenance, battery and equipment installations with limited supervisionPerform site surveys as well as quality control of other technician's activitiesTest and verify alarmsDevelop MOPs (Methods of Procedure)Build and enhance customer relationshipsProvide field updates to Operations Manager as requestedQualificationsExcellent computer skill

Cookeville, TN 38501 • (39.1 miles) • Full Time • 9/30/2026

Title: Field Service Technician IGrade: 6Position Summary & Key Areas of Responsibility:Position Summary:Are you a Field Technician? Field Engineer? Service Technician? Or do you want to start a career in this field? Are you tech savvy with a good mechanical aptitude and feel your skills are transferrable? Can you help us to provide best in class service? Do you want to work with some of the largest retail customers in the industry?NCR Voyix is looking for Field Service Technicians!Pay and Benefits:Hourly Pay Range: $19.00 to $20.83, depending on location and experience levels.Overtime available at time and a half.Benefits:7 paid holidays and 6 paid floating holidays.Paid vacation – up to 80 hours your first year.401K savings and retirement plan.Company-provided business-use-only vehicle.M

Cookeville, TN 38501 • (39.1 miles) • Full Time • 9/22/2026

Company Overview: AVASO Federal Solutions is a global leader in providing IT solutions and services, specializing in offering top-ier support and managed services. We are committed to delivering cutting-edge technology solutions to our clients worldwide. If you’re a passionate IT professional with hands- on experience in desktop support, join us at AVASO to help businesses thrive with reliable and efficient IT services.Position Overview: The Level 2 – Level 3 Field Services Technician will report directly to the Global Program Director. In this role, the Level 2 – Level 3 Field Services Technician’s key responsibility is to perform in-warranty, end-user computer hardware breakfix repairs and replacements. The individual will need to have knowledge of operating systems, computer hardware a

Knoxville, TN 37932 • (43.7 miles) • Full Time • 9/15/2026

AtCross Company, we don’t just show up for workwe show up for a company we actually own. As a100% employee-ownedindustrial technology leader, we provide specialized expertise in automation, hydraulics, precision measurement, and more that keeps the world’s manufacturers moving.We operate on the principle ofServant Leadership: we hire smart, driven people and then get out of their way so they can do what they do best. When you join the Cross team, you aren't just an employee; you’re anowner-associatein a stable, transparent, and high-performance environment where your voice truly matters.JOB SUMMARYReports To: Engineering ManagerThe Electrical Design position consists of the development of industrial control panel panels proposal and development based on UL standards utilizing AutoCAD Elect

Oak Ridge, TN • (38.5 miles) • Full Time • 10/11/2026

The roleThis role supports the design, build, and continuous improvement of our magnet and cryostat product lines.You'llwork on hardware that is already in production and on the modifications that customer orders require,regularlymoving between the CAD seat and the shop floor.You'llreport to the Engineering Manager and work alongside our engineering, production, and quality staff.The work rewards people who like understanding how something is actually made.Our systems are built in-house by certified craftspeople, and the engineers who do well here are the ones whoremainactively engaged after the design iscompleteand production begins.Whatyou'lldoProduce and revise SolidWorks models and detail drawings for magnet, cryostat, and support hardwareAdapt existing designs to meet customer-specifi

Knoxville, TN 37932 • (43.7 miles) • Full Time • 10/11/2026

PDS 8 / Power Delivery SubstationThis position is not eligible for recruiting or sourcing by outside parties.Disclaimer: Be cautious and only respond to emails from our "mesainc.com" domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels.Mesa seeks a mid-level Substation Protection & Controls (P&C) Engineer who’s looking to further their career in the electric power industry. This position is for our Power Delivery Substation group, which supports various clients across the United States.What We’re Looking ForBachelor’s degree in electrical engineerin

Oak Ridge, TN 37830 • (38.6 miles) • Full Time • 10/10/2026

MS Technology, Inc. is seeking an experienced Controls Engineer with an active Q or TS Clearance to provide onsite, hands-on support for manufacturing equipment in Oak Ridge, TN. This position will focus on troubleshooting, diagnosing, and resolving industrial equipment and control system issues, including PLCs, HMIs, instrumentation, sensors, motor controls, and related systems.The ideal candidate will have strong hands-on industrial controls experience, including experience with Allen-Bradley/Rockwell Automation or similar PLC platforms.Location:100% Onsite in Oak Ridge, TNSalary: Depending on ExperienceResponsibilitiesTroubleshoot and diagnose control system and manufacturing equipment issues.Provide hands-on technical support to identify and resolve equipment failures.Troubleshoot PLCs

Knoxville, TN 37932 • (43.7 miles) • Full Time • 10/9/2026

Ardurra is seeking an Water/Wastewater Engineer in our Knoxville, TN office. Primary Function:Our innovative water and wastewater engineers collaborate closely with clients to plan, design, permit, and construct systems that address their needs comprehensively. This approach allows our clients to make smarter investments, resulting in lower life cycle costs and additional benefits.As a recognized leader in the Southeast water industry, our projects encompass treatment and infrastructure initiatives for municipal and institutional clients. Our work ranges from drinking water supply to water reuse and wastewater management. We have the capability to support projects of all sizes within a flexible and innovative team environment.Primary Duties:Supports other team members with miscellaneous as

Oak Ridge, TN • (38.5 miles) • Full Time • 10/8/2026

Company Overview: Napakiak Environmental and Construction (NEC) is a leading provider ofinformation technology, technology development, andenvironmental and construction services, specializing in Federal and Commercial projects. Our company is committed to delivering high-quality solutions that meet stringent regulatory standards and client requirements.Overview The Electrical Engineer supports NEC’s site infrastructure and new construction projects by performing electrical system design, design reviews, and design recovery activities. This position addresses a wide range of technical challenges related to primary power distribution and facility/building electrical systems. The engineer will ensure that all designs meet performance, safety, reliability, and operability requirements.Key Res

Oak Ridge, TN • (38.5 miles) • Full Time • 10/1/2026

We’re looking for a driven, hands-onManufacturing Engineerto join our high-spec aerospace and defense manufacturing operation.We don’t run a “plug-and-play” shop. We buildlarge, complex CNC machined components and fabricated assembliesthat go into mission-critical aerospace, defense, and energy systemswhere precision and execution matter.This role is intentionally open-ended.You will sit at the center of production, owning how work actually gets donefrom process development and machining strategy to real-time problem solving on the shop floor. This is not a support role. This is abuild-it, improve-it, own-itrole.If you see inefficiencies, you fix them. If you see better ways to run parts, you implement them. If something breaks in production, you step in and solve it.For the right person,

Cookeville, TN 38501 • (39.1 miles) • Full Time • 9/25/2026

ATC is looking to hire a mid-senior level Mechanical Design Engineerin Cookeville, TN to create and support custom automation equipment. ATC Automation designs and builds custom automated assembly and test equipment for various industries including transportation, life science, and consumer goods.A Mechanical Design Engineer creates 3D designs and detail drawings of automated assembly and test equipment starting from application concepts and customer specifications. This position requires a high mechanical aptitude to design world class automation with a high level of proficiency. Enjoy a dynamic role with constant variety and challenge-no two machine designs are ever the same. With ATC you will work in a unique team environment. Our team members desire to deliver exceptional projects with

Athens, TN • (36.4 miles) • Full Time • 9/25/2026

This position is responsible for all activities related to the implementation of new capital, tooling fixtures, continuous improvement, and maintenance of weld assembly equipment. The individual needed for this role must have prior leadership experience in an Engineering function. Tooling and capital will be implemented in, but not limited to the following areas: MIG, spot and resistance welding, assembly etc. Position may also be required to assist automation and secondary process departments with specific tooling programming needsEssential Duties and Responsibilities:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily• Support the Company’s mission, vision and values in performance of daily activities• Able to effectively lead a team

Oak Ridge, TN 37830 • (38.6 miles) • Full Time • 9/18/2026

Key ResponsibilitiesPerform advanced technical tasks to support engineering projects, including conducting tests, measurements, and data collection for DOE, DOD, and commercial projects.Assist engineers and scientists in preparing complex technical documentation, including schematics, blueprints, and reports.Travel to and from different sites to oversee the assembly, installation, and testing of engineering systems and prototypes.Maintain and troubleshoot advanced technical equipment, ensuring proper functionality and calibration.Lead fieldwork activities such as surveys, inspections, and testing, ensuring accuracy and adherence to specifications.Provide technical guidance and mentorship to junior technicians and engineering staff.Ensure compliance with safety and environmental regulations

Crossville, TN • (5.3 miles) • Full Time • 9/16/2026

Our Company Whisper Aero is pioneering a more compelling and connected future by delivering cleaner, quieter, and more efficient propulsion solutions. Today's open rotor propulsion systems are challenged by safety, noise, and performance limitations at all scales. Whisper's breakthrough technologies allow aircraft to fly anywhere at any time without disturbing communities, at greater speeds, and with incredible improvements in efficiency and cost. Their innovations also enable a new generation of air moving products that can blend into the soundscapes of daily life. Whisper was founded by industry veterans, Mark Moore and Ian Villa, and continues to innovate a future that's as considerate as it is compelling with its world-class team in Tennessee.About the RoleWhisper Aero is seeking a Pr

Oak Ridge, TN • (38.5 miles) • Full Time • 9/15/2026

Job Title: QA Engineer (NQA-1) Location: Oak Ridge, TN Type: Direct Hire Work Model: Onsite – onsite ResponsibilitiesEnsure activities affecting engineering, procurement, dedication/qualification, and manufacturing processes conform to the ASME NQA-1 standard for items and services provided to nuclear facilities. Develop, implement, and maintain an NQA-1 compliant Quality Assurance Program. Review project deliverables, procurement requisitions, and quality verification documents for compliance with contractual and regulatory requirements. Coordinate and conduct internal and external vendor audits as an NQA-1 auditor. Identify, evaluate, and track nonconforming items or processes and develop/maintain corrective and preventive actions (CAPA). Ensure compliance with nuclear quality frameworks