Fort Worth, TX • (33.8 miles) • Full Time • 9/25/2026

Engineer - Quality QSummaryA Quality Engineer provides statistical information for quality improvement by identifying testing methods and samples.Position Description/General responsibilities include:Assist with maintenance of the Quality System.Assist Quality Manager & Supervisor in establishing, implementing and maintaining the quality management system.Interface with Engineering and Operations to ensure transfer to Production of new products is in accordance with approved data.Support the Quality Inspectors to ensure that products and processes comply with the relevant requirements of the quality management system.Analyze failure, corrective and preventive action to respond to internal/external customer complaints.Create and maintain company quality documentation, such as quality manual

Fort Worth, TX 76155 • (41.8 miles) • Full Time • 9/25/2026

*Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.*Job Title: Fly-By-Wire & Secondary Control System EngineerJob Location: Wichita, KSWhat are your contributions to the team?Perform the integration of the FBW & Secondary Flight Controls system on the aircraft.Support the development of concepts, design approach and philosophy with the Flight Control system supplier.Perform/Review analysis to evaluate concepts feasibility.Develop, validate and verify technical requirements of the Flight Control System.Review/Prepare technical requirementsReview/Prepare test proceduresExecute test rig and/or aircraft testingReview/Prepare test reports in support of certification activitiesResolve problems a

Fort Worth, TX 76101 • (35.6 miles) • Full Time • 9/25/2026

Job Title: Engineering Technician - 100% Travel Location: Fort Worth, TX Type: Contract Compensation: $25-35 Hours: 40.0ResponsibilitiesSupport site preparation for contractor installation of communications racks ranging from wall-mounted racks to multi-rack configurations Install critical power circuits, grounding systems, convenience outlets, cable trays, conduits, and related infrastructure as specified within engineering packages Support fiber optic cabling, telecom infrastructure, monitors, voice recorder systems, and communications equipment Assist in LTE antenna installation activities and establish cable pathways for communications infrastructure Remove and replace electrical components, wire bundles, terminal blocks, connectors, and related hardware Test and troubleshoot electrica

The Colony, TX 75056 • (40.6 miles) • Full Time • 9/25/2026

Field Service Engineer (Staff/Senior/Lead) The Colony, TX 75056About UsOceus' mission is to enable our customers to securely communicate anywhere at any time. Our team of telecommunications experts works to solve the unique communications and data challenges in a wide range of commercial private networks, combat tactical, austere, and emergency response situations. We develop, integrate, and customize technology for delivering access to fast, reliable broadband connectivity in mission-critical operations. For more information, please visit us at https://oceus.ioSecurity Clearance Requirement:Current clearance or ability obtain a secret clearance Location:Local to The Colony, TX to support on-site work Travel: Up to 50%Job Type:Full Time offering competitive salary and eligibility for compa

Fort Worth, TX 76137-3632 • (33.8 miles) • Full Time • 9/22/2026

Description: ABOUT INTERCONNECT WIRINGHeadquartered in Fort Worth, TX, we build electrical wiring harnesses, specializing in fast turnaround and developmental programs. Founded in 1993, we continue to be a world leader in supplying military aerospace electrical products. Some of our most noteworthy accomplishments include the complete and partial rewiring of military aircraft.We work hard to be an employer of choice and make our working environment safe, comfortable, family-friendly, and fun. In addition to competitive compensation, our employees enjoy Fridays off.The Manufacturing Engineer supports aerospace wiring harness production by directing daily operations, developing engineering documentation, and driving continuous improvement across manufacturing processes. This role bridges eng

North Richland Hills, TX 76180 • (34 miles) • Full Time • 9/22/2026

Job Title: Pre-Construction EngineerLocation: North Richland Hills, TXPay: $75,000 – $85,000 per year (based on experience) + comprehensive benefitsRagle Inc. is seeking a detail-oriented Pre-Construction Engineer to facilitate smooth transition from estimating to operations by coordinating pricing, procurement, jobsite setup, documentation, and technical review of contract documents. This role works closely with the Preconstruction Team, Project Managers, and Field Operations. This position is well-suited for recent Construction Management or Civil Engineering graduates who are eager to begin their careers in the construction industry, as well as candidates with 1–2 years of experience in heavy civil construction projects.Key Responsibilities· Attend procurement and handover meetings· Dev

Frisco, TX 75034 • (44 miles) • Full Time • 9/21/2026

At Core States Group, the work you do matters to the clients we serve, the communities we support, and the teams who rely on one another to deliver with excellence. Our Cause is powerful: to create a world where all environments improve everyday life.Why Professionals Choose Core States GroupHere's what you can expect:COMPENSATION – Competitive wages and bonus programsRETIREMENT– We offer a great 401(k) match to help you invest in your future and grow your retirement savings with confidence.HEALTHCARE– Excellent health benefits, life insurance options, and supplemental benefit options, giving you the flexibility to choose the coverage that best fits your needs and lifestyle.VACATION– Generous PTO time to help you recharge, relax, and maintain a healthy work-life balance.PERKS– Team wellnes

Fort Worth, TX 76107 • (35.5 miles) • Full Time • 9/16/2026

As a Civil Intern at Gessner Engineering, you will contribute to the completion of Civil Engineering projects by supporting engineering teams in the drafting and design of project deliverables. Internships with Gessner Engineering uniquely feature opportunities to grow not only in your technical proficiency, but to develop as a well-rounded industry professional. Gessner delivers on this by granting our interns opportunities to work on active projects, receive training and mentorship from engineering professionals, collaborate across disciplines, experience leadership development, and more.Duties & ResponsibilitiesCollaborate with a diverse group of industry professionals, from EITs to Senior PEs and PMs.Coordinate across internal disciplines like survey, structural, geotechnical, etc. an

Fort Worth, TX 76102 • (35.7 miles) • Full Time • 9/15/2026

BGE is looking to hire a TXDOT Utility Coordination Engineer PM (P.E.) for our Transportation systems dept.BGE, Inc. is a nationwide consulting firm that provides services in civil engineering, planning, landscape architecture, construction management, survey, and environmental services for public and private clients. Our employees enjoy a comprehensive benefits package such as outstanding health care, generous 401(k) match, career mapping and highly competitive time away from work programs to include remote work options, dependent care, and flexible Fridays.Locations:2595 Dallas Pkwy #101, Frisco, TX 75034Responsibilities:Project Manager for Utility Coordination/engineering projects.Direct responsibility for Subsurface Utility Engineering (SUE) and utility coordination/ engineering projec

Fort Worth, TX 76118 • (37.4 miles) • Full Time • 10/10/2026

Paragon is seeking a Logic Design Engineer to join our Innovation team to support the future development of advanced nuclear reactor control, monitoring and safety systems.Responsibilities:Partner with system design team to research, design and implement I&C solutionsDevelop and implement I&C systems design hardware and logicPrepare I&C design products such as logic diagrams and system codePrepare I&C design documentation such as requirements and design specificationsPrepare and execute I&C test specificationsDesign digital signal processing systems with FPGAsTroubleshooting I&C systems hardware and logic.Analyzing the costs and risks of system development activitiesEnsuring systems are reliable, efficient, and compatibleRequirements:A minimum of a Bachelor of Science (B.S.) degree in Syst

Irving, TX • (43.9 miles) • Full Time • 10/2/2026

DescriptionHolt CAT is seeking an experienced Engine Field Service Technician for the Power Systems Division in Irving, Texas. This position is responsible for performing high-quality field service repair work on industrial or natural gas engines in order to respond to customer needs in a positive, caring, and timely manner and to ensure maximum value for work performed. A valid driver's license and the ability to travel in the local region. Hours for this position are Monday through Friday 7:00 AM to 4:00 PM. Must have a safe driving record. Must be able to pass and maintain a DOT Physical. Travel will be required.Essential FunctionsTroubleshoot and perform complex repairs correctly in the field such as industrial engines and transmissions.3 years of field or shop service tech troubleshoo

Fort Worth, TX • (33.8 miles) • Full Time • 10/8/2026

Job Description Who will you be working with? The Wabtec Mining Engineering team develops advanced electric drive propulsion systems for large mining trucks, helping customers improve productivity, efficiency, and sustainability through innovative technology.How will you make a difference? You will work with the electrical and controls engineering team to design, develop, validate, implement, and deliver control systems for electric drive mining vehicles. You’ll have the opportunity to interact directly with customers and cross functional teams during product definition, development, and fulfillment.What do we want to know about you?Degrees completed and in progress - this role requires a Bachelor’s degree in Electrical Engineering; advanced degrees preferred.Engineering experience in the

Coppell, TX • (39 miles) • Full Time • 10/8/2026

Job Title: Commissioning DirectorLocation: Coppell, TXType: Direct HireCompensation: $135,000.00 – $200,000.00Work Model: Onsite Overview The Director of Commissioning leads and supports teams responsible for ensuring that building systems are designed, installed, and operated in alignment with the Owner’s operational requirements and the Engineer’s design intent. This role regularly engages with owners, their representatives, contractors, engineers, and architects to carry out essential responsibilities.Responsibilities • Mentor and develop Cx Professionals, fostering a culture of excellence, accountability, and strong client focus. Establish performance standards, deliver coaching, and conduct evaluations as needed. • Collaborate with clients, internal teams, and external partners to ens

Fort Worth, TX 76177 • (24.1 miles) • Full Time • 10/6/2026

Company Overview:MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification.We are the only U.S. company with a fully integrated rare earth supply chainfrom mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselvesenabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AIthe convergence of computation, movement, and control.We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and

Fort Worth, TX 76137 • (30.7 miles) • Full Time • 10/6/2026

We are looking to hire a Mechanical Drafter/Designer immediately to support the design and manufacturing of custom modular wall systems and architectural products. This role is heavily focused on creating detailed manufacturing drawings, 3D models, assembly drawings, and bills of materials using Autodesk Inventor and Autodesk Vault.The ideal candidate will have strong experience working in Inventor daily, managing engineering documentation within Vault, and supporting manufacturing teams through accurate drawings and BOM creation. This is an excellent opportunity for someone who enjoys detailed design work, product development, and CAD data management within a manufacturing environment.Duties:Create and modify 3D models, shop drawings, assembly drawings, and manufacturing documentation usi

Fort Worth, TX • (33.8 miles) • Full Time • 10/6/2026

Company Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company.We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us.Job DescriptionOlsson provides multidisciplinary, preliminary, and construction design services for mixed-use, commercial, and residential land development projects, along with industrial, spo

Westlake, TX • (27.9 miles) • Full Time • 10/3/2026

Description:Hybrid 2 weeks per month onsite in Westlake, TXOur client is seeking a Senior Software Engineer in Test to join a Digital Solutions team supporting enterprise web applications and digital platforms. The ideal candidate is passionate about modern technologies and has a strong background in software quality engineering, test automation, Agile development, continuous integration, and software development best practices. This individual will serve as a technical lead for test automation initiatives, ensuring application quality through the design, development, and execution of automated functional, regression, integration, and API test suites.Due to client requirements, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits pack

Irving, TX 75062 • (44.9 miles) • Full Time • 10/3/2026

You are a P.E.with a B.S. in Mechanical Engineering and 10+ years of hands-on manufacturing and production experience. You have a comprehensive understanding of plant and/or process engineering, machine guarding,and hardcore industrial safety experience.You are already an expert. Robson Forensic will train you to be a forensic expert.As a Mechanical Engineer – Industrial/Manufacturing Expert, you will:Investigate incidents involving equipment, safety products/procedures, material handling, hand tools, & plant layouts.Analyze inadequacies in machine guarding, instructions, warnings, or personal protective equipment (PPE), etc., applying your comprehensive knowledge of standards and practices.Write clear, scientifically sound reports.Provide expert testimony.You will delve into the "why" beh

Fort Worth, TX 76116 • (35.8 miles) • Full Time • 10/2/2026

At Baird, Hampton & Brown, our mission is building partners through creative, sustainable engineering solutions, and honest, long-term relationships. With over 30 years in the business, we understand that a solid foundation is necessary in every aspect of what we do. We support our team members in pursuing excellence in their fields and balancing their lives. We serve our clients with integrity, communication, and involvement at every stage. As a team member, you can trust BHB to champion our core values, which leads to healthy, mutually beneficial relationships as well as services of the highest caliber. We are currently seeking a full-time, exemptMechanical Professional Engineer (PE). As a mid-level position, will oversee small to mid-size mechanical and HVAC/Plumbing design projects tha

Fort Worth, TX 76177 • (24.1 miles) • Full Time • 10/2/2026

ASI is expanding its teams to support its current ramp-up across development work, customer projects, and product deployments. This is a full-time W-2 contract position. The selected candidate will interview with ASI and work as an integrated member of the ASI team. W-2 employment, payroll, and benefits will be administered through one of ASI's staffing partners. Development phases of this nature typically span up to project completion (typically 2-4 years), though scope and duration are driven by business needs.JOB SUMMARYThe Perception Engineer III develops, integrates, and validates perception capabilities that enable ASI's autonomous articulated dump trucks (ADTs) and water carts to understand terrain, detect obstacles, recognize haul road and work-area conditions, and operate safely i

Grapevine, TX 76051 • (35.4 miles) • Full Time • 9/27/2026

GameStop is in the midst of a game-changing metamorphosis, transforming from old school into a modern company that is driven at its core by technology. As part of our investment in technology, we are looking for a Principal Software Engineer to play a key role in developing critical back-end systems within our engineering ecosystem, specifically focused on systems related to payments, transactions, and customer rewards. Expect to collaborate closely with engineering leadership and numerous other engineering teams throughout our tech organization to build out new systems.This position will sit onsite in Grapevine, TX 5 days per week.What You’ll DoHelp envision and set up a modern technology stack (cloud infrastructure, Kubernetes, service-oriented architecture, etc.) to lay the foundation f

Fort Worth, TX 76155 • (41.8 miles) • Full Time • 9/25/2026

"We are unable to sponsor or take over sponsorship of an employment visa at this time."Job Title: Professional Engineering - Electrical Systems IntegrationJob Location: Any of below location• Wichita (USA)• Hartford (USA)• Dallas (USA)• Opa Locka (Florida, USA)• Tucson (USA)What are your contributions to the team?In your role, you will be supported by the electrical systems manager as a Professional – Engineering – Electrical Systems Integration in a multifaceted position within the Functional Engineering Team. At customer end, the Electrical System Integration team is responsible to develop, certify, improve, and maintain the best industry standards for the Electrical Power Generation & Distribution systems and lighting systems architectures on our airplanes. In this role, you will:• Part

Arlington, TX 76004 • (43.9 miles) • Full Time • 9/25/2026

Civil Engineer – Project Engineer IV / VLocation: Arlington, TexasCompany: Graham Associates, Inc.Represented by: Luxus Group Recruiting www.LuxusJobs.comAbout Graham Associates, Inc.Graham Associates, Inc. is a full-service civil engineering, planning, and surveying firm headquartered in Arlington, Texas, with a rich history of impact across North Texas since its founding in 1972. The firm's civil engineering expertise spans land development, transportation infrastructure, public utilities, drainage design, urban planning, hydrology/hydraulics, and surveying. Graham has delivered award-winning and high-visibility projects including transportation improvements, mixed-use developments, and major civic infrastructure such as AT&T Stadium, Globe Life Park, the I-H-30 Three Bridges Project, an

Denton, TX • (25.8 miles) • Full Time • 9/25/2026

SummaryCreates, modifies, and reviews complex electrical designs while maintaining the highest quality engineering on-time and on-budget. Responsible for product research, design, modification, installation, integration, certification, and testing of aircraft interior electrical systems for Commercial, VIP, and Special Mission aircraft applications. Assists leadership in training and process improvements.Essential Duties and ResponsibilitiesCreates a master drawing list of electrical systems drawings and documents for project level STC.Defines electrical system architecture development by meeting client and regulatory requirements for program specific interiors including Air Conditioning and Heating, Cabin Management, In-Flight Entertainment, In-Flight Communication, Electrical Power Distr

Fort Worth, TX 76177 • (24.1 miles) • Full Time • 9/24/2026

Description: Position Summary: Responsible for coordination of all technical activities on assigned projects. Plans, schedules, conducts, and coordinates assigned engineering work; monitors work for compliance to applicable FAA/EASA regulations, customer requirements, accepted engineering practices, as well as RECARO standards; ensures effective communication and coordination on assigned projects between all disciplines and all other project participants. Responsible and accountable to ensure that all assigned personnel are coordinating their activities with other project participants and that the requirements of the Contract are being satisfied. On a large project the Project Manager may delegate certain project management responsibilities to the Project Engineer, including day-to-day int

The Colony, TX 75056 • (40.6 miles) • Full Time • 9/24/2026

Software Engineer (Mid Level) The Colony, TX 75056About UsAbout Us Oceus Networks’ mission is to enable our customers to securely communicate anywhere at any time. Our team of telecommunications experts works to solve the unique communications and data challenges in a wide range of commercial private networks, combat tactical, austere, and emergency response situations. We develop, integrate, and customize technology for delivering access to fast, reliable broadband connectivity in mission-critical operations. For more information, please visit us at https://oceus.ioJob Type: Full TimeSecurity Clearance Requirement: SecretLocation: On-SitePosition Description:Oceus is hiring a Software Engineer with mid-level experience to join their staff. The team is focused on R&D software development a

Roanoke, TX 76262 • (25.9 miles) • Full Time • 9/23/2026

SUMMARY:A Design Engineer at Cummins will be responsible for the design, release, and testing of Compressed Natural Gas systems. Key tasks include integration of components, ensuring proper fitment, FEA analysis and compliance with industry standards and regulations will be required.ESSENTIAL DUTIES AND RESPONSIBILITIES: Other duties beyond this representative listing may be assigned to the essential job duties and responsibilities of this position based on Company needs. Design and implement new systems and updates to existing systemsCreate and verify 3D models using Autodesk Inventor and FEA toolsLead design reviews with cross functional partners and drive design for manufacturing/assembly and make vs buy decisions.Liaise with procurement, production, suppliers, and customers with guidan

Fort Worth, TX • (33.8 miles) • Full Time • 9/22/2026

Engineer - Quality QSummaryA Quality Engineer provides statistical information for quality improvement by identifying testing methods and samples.Position Description/General responsibilities include:Assist with maintenance of the Quality System.Assist Quality Manager & Supervisor in establishing, implementing and maintaining the quality management system.Interface with Engineering and Operations to ensure transfer to Production of new products is in accordance with approved data.Support the Quality Inspectors to ensure that products and processes comply with the relevant requirements of the quality management system.Analyze failure, corrective and preventive action to respond to internal/external customer complaints.Create and maintain company quality documentation, such as quality manual

Frisco, TX 75034 • (44 miles) • Full Time • 9/21/2026

At Core States Group, the work you do matters to the clients we serve, the communities we support, and the teams who rely on one another to deliver with excellence. Our Cause is powerful: to create a world where all environments improve everyday life.Why Professionals Choose Core States GroupHere’s what you can expect:VALUES-DRIVEN CULTURE– A workplace rooted in Integrity, Service, Inclusion, Excellence, and Innovation. Our Core Values guide how we work, how we treat each other, and how we show up for our clients every day.COMPENSATION – Competitive wages and bonus programs, including professional licensure bonuses.RETIREMENT – A strong 401(k) match, with immediate vesting, to help you invest in your future and build your retirement savings with confidence.HEALTHCARE – Competitive health b

Fort Worth, TX 76137-3632 • (33.8 miles) • Full Time • 9/20/2026

Description: Quality EngineerAerospace ManufacturingFort Worth, TXABOUT INTERCONNECT WIRINGHeadquartered in Fort Worth, TX, we build electrical wiring harnesses, specializing in fast turnaround and developmental programs. Founded in 1993, we continue to be a world leader in supplying military aerospace electrical products. Some of our most noteworthy accomplishments include the complete and partial rewiring of military aircraft. We work hard to be an employer of choice and to make our working environment safe, comfortable, family-friendly and fun. In addition to competitive compensation, our employees also enjoy Fridays off.Job Description:QualitySign certifications of conformanceMaintain ISO/AS9100 registration. Serve as Management representative for registration bodies.Point of Contact f

North Richland Hills, TX 76180 • (34 miles) • Full Time • 9/18/2026

Field Engineer Intern – Summer 2027Ragle, Inc. | Dallas/Fort Worth Heavy Highway Division Are you ready to kickstart your career incivil engineering and heavy highway construction? Since 1993,Ragle, Inc.has been building highways, bridges, and more across Indiana, Kentucky, Texas, and Illinois. We’re afamily-owned companythat values teamwork, innovation, and professional growthand we’re looking for motivated students to join ourSummer 2027 Project Engineer Internship! Why Intern with Ragle?Weekly pay & housing providedInternship programs startafter Memorial Day 2027Weekly Pay is $1,250 (Taxes not included)50 hour work weekHands-on experience working on real construction projectsCareer growth opportunities:Many of our interns go on to full-time rolesone of our former interns is nowChief of

Haslet, TX 76052 • (20.7 miles) • Full Time • 9/15/2026

Senior Automation EngineerPosition Type: Full-time, Exempt, SalaryReports to: Automation ManagerSupervisory Responsibility: NoneLocation: Jacksonville, FL (Headquarters) or Fort Worth, TX (Manufacturing Plant)Company SummaryStellar Energy is a trusted provider of turnkey liquid-to-chip cooling solutions for the world’s leading data center and industrial manufacturing customers. As computing demand and industrial processes continue to grow, modern facilities require cooling infrastructure that can scale quickly, efficiently, and reliably.Our modular approach enables high-volume production while maintaining the flexibility to customize each solution. From Central Utility Plants to Coolant Distribution Units, Stellar Energy delivers scalable cooling infrastructure designed to support the rapi

Denton, TX • (25.8 miles) • Full Time • 9/15/2026

Title: Program Director Research Education & ProgrammingEmployee Classification: Program DirectorCampus: University of North TexasDivision: UNT-Research & InnovationSub Division-Department: UNT-Research & InnovationDepartment: UNT-Toulouse Grad Sch-Dean's Off-142100Job Location: DentonSalary: $74,352 - $98,000FTE: 1.000000Retirement Eligibility: TRS EligibleAbout Us - Values Overview Welcome to the University of North Texas System. The UNT System includes the University of North Texas in Denton and Frisco, the University of North Texas at Dallas and UNT Dallas College of Law, and University of North Texas Health Fort Worth. We are the only university system based exclusively in the robust Dallas-Fort Worth region. We are growing with the North Texas region, employing more than 14,000 emplo

Fort Worth, TX 76102 • (35.7 miles) • Full Time • 9/15/2026

BGE is seeking a Project Manager for the Public Works department in our Fort Worth Office.BGE, Inc. is a nationwide civil engineering consulting firm that provides services in land/site development, public works, transportation, planning, landscape architecture, construction management, survey and environmental services for public and private clients. Our employees enjoy a comprehensive benefits package to include outstanding health care, generous 401(k) match, career mapping/mentorship, and highly competitive time away from work programs to include dependent care and flexible Fridays.Responsibilities:Plan and design of water and wastewater systems including modeling, pipeline, lift stations and treatment facilitiesIndependently perform engineering assignments for municipal, residential an

Coppell, TX • (39 miles) • Full Time • 9/15/2026

Position Title:Sr Azure AI EngineerLocation:Coppell, TX (Onsite, In Office Daily)Job Type:Contract-to-HirePay Rate:$70 / HourBenefits:This position is eligible for medical, dental, vision, and 401(k).Position Overview:We’re looking for a senior engineer to help design and scale AI capabilities across a cloud-based application ecosystem. This role focuses on building the core platform, services, and standards that allow teams to integrate machine learning and generative AI into products in a secure, reliable, and scalable way.What You’ll DoDevelop and embed AI-driven features into applications, workflows, and backend servicesPartner with product and business teams to identify high-impact use cases for automation, insights, and personalizationBuild reusable components and frameworks to enabl

Irving, TX • (43.9 miles) • Full Time • 10/2/2026

DescriptionHolt CAT is the largest Caterpillar dealership of heavy equipment in the United States. We are seeking an experienced Electrical Power Generator - Field Service Technician for our Irving, Texas location. This position is responsible for providing troubleshooting and high-quality repair service on power generation, gas and diesel engines, and ATS (Automatic Transfer Switches), in order to respond to customers, needs in a positive, safe and timely manner to ensure maximum value for work performed. At least 5 years of field or shop tech troubleshooting and repair skills of Electrical Power and Generator experience required. At least 5 years of field or shop tech troubleshooting and repair skills of ATS (Automatic Transfer Switches) experience required. Must have a clean driving rec

Grapevine, TX • (35.9 miles) • Full Time • 10/12/2026

Tech - Engineer Grapevine, TXSummaryThe Engineering Technician is responsible for developing and testing solutions to solve technical problems related to all aspects of computer repair. Assists engineers, conducts tests and collects data.Duties and Responsibilities:Data Analysis/Communication/Issue Resolution Prevention/Creates solutions to technical problems.Performs research and development as instructed by engineering manager.Use math and science skills to assist engineers in development of improved processes and assembly/repair systems.Perform quality control testing, assembly, and maintenance duties as required.Participate in system requirements evaluation, analysis, and implementation.Implement warehouse efficiencies and cost reduction programs to assist the company in making better

Fort Worth, TX 76137 • (30.7 miles) • Full Time • 10/6/2026

Validation Engineer Medical Device Manufacturing (Dallas-Fort Worth) Our client, a well-established medical device manufacturer in the Dallas-Fort Worth area, is seeking a Validation Engineer to support the development, qualification, validation, and ongoing optimization of manufacturing processes, equipment, software systems, and quality systems. This role will be responsible for planning and executing validation activities, including IQ/OQ/PQ protocols, analyzing validation data, preparing technical documentation, and ensuring compliance with regulatory and quality requirements. The Validation Engineer will collaborate closely with Quality, Manufacturing, Engineering, R&D, and Regulatory teams to support new product introductions, process improvements, equipment qualifications, computeri

Fort Worth, TX • (33.8 miles) • Full Time • 10/6/2026

Job Description Who will you be working with?The Locomotive Controls Engineering team is responsible for the design, development, integration, and validation of locomotive communications and control networks that support freight, transit, hybrid, and battery-electric locomotive platforms. In this role, you will collaborate with customers, suppliers, systems engineering, software engineering, cybersecurity teams, manufacturing, validation, and service organizations to develop robust and reliable network architectures that support Wabtec's next-generation transportation technologies.How will you make a difference?As a Senior Engineer – Locomotive Network Controls, you will serve as a technical leader responsible for the architecture, development, and validation of locomotive communication ne

Fort Worth, TX • (33.8 miles) • Full Time • 10/6/2026

Company Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company.We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us.Job DescriptionOlsson provides multidisciplinary design services for mixed-use, commercial, and residential land development projects, along with industrial, sports, schools, and other site de

Irving, TX 75039 • (44.2 miles) • Full Time • 10/6/2026

Mid-Level Mechanical Engineer (Mechanical Engineer II)Company Name:DFW ConsultingLocation: Las Colinas, TXProject Focus: Airports, Data Centers, and Mission-Critical InfrastructureWork Setting: In-Office / FlexibleSalary: $85,000 – $117,000 + BenefitsRecruited Exclusively By: Luxus | AEC Talent PartnersPosition OverviewAre you a mechanical engineer ready to step out of the shadows of senior oversight and into a role defined by autonomy and technical complexity? We are seeking a Mid-Level Mechanical Engineer to join our Las Colinas team to spearhead the design of high-stakes, mission-critical environments. In this role, you aren't just processing sheets; you are a primary problem-solver tasked with engineering the sophisticated HVAC and hydronic systems that power global logistics, data sec