Longview, TX • (29.3 miles) • Full Time • $16.50 to $17.50 / hr • 10/20/2026

Applied Metallurgical is seeking a dependable, hardworking Molding Team Member to help produce the molds used to manufacture iron castings. This entry-level position offers hands-on training and room to take on greater responsibility as your skills develop. No prior foundry experience is required. Bring a willingness to learn, a strong work ethic and a commitment to working safely. Job Duties Include: Prepare patterns, flasks, and molding equipment for production. Assist with filling, compacting, and preparing sand molds. Apply mold coatings and perform finishing work according to established procedures. Position cores and assist with assembling and closing molds. Inspect molds for damage or defects before pouring. Stage completed molds and materials to support the production schedule. Kee

Longview, TX • (29.3 miles) • Full Time • $16.50 to $18.50 / hr • 10/20/2026

Applied Metallurgical is looking for a Melt Technician who’s not afraid of hard work and heat. This is a hands-on role working directly with molten metal, induction furnaces and heavy equipment to keep production moving safely and efficiently. All safety wear is provided. Job Duties Include: Work with the plant metallurgist to build and charge melts Weigh alloys and scrap for furnace charges Run coreless induction furnaces, pumps, and cooling systems Take molten metal samples and pour heats using overhead cranes Repair and maintain refractory in furnaces and ladles Qualifications: Forklift certification or experience Bobcat / skid-steer experience preferred Safety-first mindset with experience around molten metal Solid math skills for charge calculations Comfortable using hand tools

Longview, TX • (29.3 miles) • Full Time • $25.00 / hr • 10/20/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform weld

Longview, TX • (29.3 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and report

Longview, TX • (29.3 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benefits: Only

Longview, TX • (29.3 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic mach

Henderson, TX 75652 • (8.8 miles) • Full Time • 11/1/2026

This position is located at the West Fraser Lumber Mill located in Henderson, Texas. The Industrial Manufacturing Electrician will be responsible for troubleshooting, correcting, and maintaining all electrical equipment within the manufacturing facility. Responsibilities include but not limited to: Test electrical systems and circuits in electrical wiring, equipment, or fixtures Inspect electrical systems, equipment, or components to identify hazards, defects, or repair Troubleshoot, program, and upgrade Programmable Logic Controllers (PLC) Work with vendors to identify needed parts and recommend to Supervisor Understand and update instrumentation loop diagrams, E & I drawings, blueprints, and schematics Program AC & DC variable speed drivers Update power distribution system, MCC, and swit

Longview, TX 75601 • (30 miles) • Full Time • $1,200 to $6,000 / mo • 11/10/2026

LEGIT PRODUCTIONS LLC Texas Division PIT Crew (Production Intake Team) About the PIT Crew The Production Intake Team (PIT Crew) is the creative and operational support team within Legit Productions LLC. PIT Crew members help transform opportunities generated by our Client Sourcing Agents (CSAs) and Division leadership into organized, professional production projects. As Legit Productions continues expanding across multiple markets, the PIT Crew plays an important role in helping us maintain quality, organization, creativity, and professionalism as our project volume increases. This is an opportunity for creatives and production-minded professionals who want to grow with an expanding media company and potentially take on greater responsibilities as the organization develops. Core Responsibi

Kilgore, TX 75662 • (20.7 miles) • Full Time • $55,000 to $85,000 / yr • 11/9/2026

Description: POSITION SUMMARY Great Opportunity! Supports quality operations by performing inspections, maintaining quality records, and assisting with non-conformance documentation and supplier quality activities. ESSENTIAL DUTIES & RESPONSIBILITIES Perform dimensional and visual inspections on incoming, in-process, and finished parts Record inspection results in quality records and ERP system Identify and tag non-conforming material and initiate NCR documentation Assist with first article inspections (FAI) and qualification testing Support internal and customer quality audits Maintain calibrated measuring equipment and calibration records Assist Quality Manager with data entry, reporting, and filing Requirements: REQUIRED QUALIFICATIONS High school diploma or GED 2+ years inspection or q

Wells, TX • (41.4 miles) • Full Time • 11/9/2026

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our teamas we grow. Job Title: Natural Gas Distribution Inspector Level 1-4 Location: Mineral Wells, TX Level 1 Key Responsibilities- Perform inspections on pipelines to assess their structural integrity, safety, and compliance with industry regulations. Prepare detailed inspection reports outlining findings, recommendations, and necessary repairs. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblit

Pollok, TX 75969 • (44.1 miles) • Full Time • $22.00 to $24.00 / hr • 11/8/2026

Qualifications Minimum of 12 months of relevant experience in tree care, vegetation management, or a related field. Demonstrates proficiency in all skills, knowledge, and responsibilities required for lower-level positions. Strong verbal and written communication skills, with the ability to interact professionally with customers, utility personnel, and Arbor Resources, LLC employees. Ability to read maps, interpret work locations, and efficiently route crews to job sites. Provides guidance and on-the-job training to less experienced employees, promoting safe work practices and skill development.

Tyler, TX • (32.3 miles) • Full Time • 11/8/2026

Company Description Location: Tyler, TX Pay: Pay Rate $30.71/hour Shift: 5:00 AM - 3:00 PM; Monday - Thrusday The Pipe Mold CNC Journeyman Machinist is responsible for setting up, operating, and optimizing a variety of CNC machine tools, including lathes and milling machines, to manufacture precision machine parts and related components. This position requires advanced machining knowledge, the ability to interpret technical drawings and specifications, and expertise in CNC program adjustments to ensure quality, efficiency, and productivity. The role also supports machine shop scheduling, tooling selection, and operator training while maintaining the highest standards of safety and workmanship. Job Description Set up, operate, optimize, and modify CNC lathes, mills, and related equipment to

Kilgore, TX 75662 • (20.7 miles) • Full Time • $21.47 to $36.81 / hr • 11/7/2026

Description HOLT CAT in Kilgore, Texas is looking for a experienced Machinist for our heavy construction equipment shop. The Machinist performs all standard machining repairs on heavy equipment or components in a shop environment. Demonstrates a willingness to help in other areas when needed. Must be able to lay out tasks, reads and interprets blueprints and technical publications, designs and draws working sketches. Hours for this position are Monday through Friday 7am to 4pm. We are located at 3007 Maverick Drive, Kilgore, Texas 75662. Key Responsibilities Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission Demonstrates well developed technical skills and

Tyler, TX 75708 • (31.8 miles) • Full Time • $23.00 to $26.00 / hr • 11/7/2026

Our client is seeking a detail-oriented SolidWorks CAD Drafter to work directly with an engineer in a manufacturing environment. This position focuses primarily on creating, modifying, and maintaining accurate technical drawings and production documentation rather than developing new designs. The ideal candidate will have strong hands-on SolidWorks experience, excellent attention to detail, and the ability to interpret engineering specifications. Key Responsibilities Work closely with an engineer to develop and revise manufacturing drawings. Create and modify 2D and 3D drawings, parts, and assemblies using SolidWorks. Prepare sheet metal drawings, piping diagrams, and technical documentation. Maintain bills of materials (BOMs), production routings, and engineering change documentation. Ens

Longview, TX • (30.4 miles) • Full Time • 11/6/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control sys

Tyler, TX 75702 • (34.2 miles) • Full Time • 11/6/2026

Are we the road to your future? We are currently searching for a Junior level and Senior level CAD Technician to support our Southwest Region located in Austin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX . The ideal candidate will be responsible for coordination and oversight of geometric design projects. What you’ll be doing: Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projects Contribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plans Prepare minor mathematical calculations and quantity calculations for roadway/bridge projects Work with engineers to develop 3D models using both OpenRoads Designer Research app

Tyler, TX • (32.3 miles) • Full Time • $18.00 to $25.00 / hr • 11/4/2026

Role Overview Candidate must understand SMT terminology. This person must be knowledgeable of SMT components types and their package size. The operator should be experienced with the total SMT process from set-up, feeders, programming knowledge, stencil, manual and automated printing, solder paste, and reflow ovens. Skills include a comprehensive understanding of IPC standards. Key Responsibilities The SMT operator will run and maintain the SMT equipment (paste printer, pick and place,reflow). Operator will also be expected to program jobs. Job Description: Duties include operating, maintenance, and any associated tasks related to SMT. Responsibilities will vary and it is expected this individual will be ableto operate and maintain equipment other than SMT equipment. This person must be ca

Longview, TX • (30.4 miles) • Full Time • 11/4/2026

The Product Technician I – Hubodometers is responsible for supporting day-to-day production operations within the assembly area. This role is a key contributor to a high-performing team and is expected to assemble components, follow standard work, and ensure product quality through accurate inspection and defect detection. This position requires strong attention to detail, the ability to consistently follow standardized processes, and a commitment to safe work practices, quality execution, and continuous improvement. What You’ll Do: Perform manual and/or semi-automated assembly operations in accordance with established standard work and safety procedures Assemble components and sub-assemblies using tools, fixtures, and work instructions to meet product specifications Inspect finished and i

Kilgore, TX 75662 • (20.7 miles) • Full Time • 11/3/2026

Who are we? National Refrigeration and Air Conditioning Canada Corp. is a leading North American manufacturer of commercial refrigeration products marketed under the KeepRite Refrigeration brand name. These products include specialized applications in food storage and processing, industrial process cooling, including evaporator coils, condensing units, condensers, heat transfer and heat recovery and air conditioning products. From the smallest unit to the very largest, KeepRite Refrigeration brings experience and commitment to the refrigeration industry - beginning with product design and engineering and continuing through manufacturing, sales and after-market support. KeepRite Refrigeration products have been manufactured and distributed worldwide for 80 Years. About the Role: We are seek

Tyler, TX 75707 • (25.2 miles) • Full Time • 11/3/2026

Entry Level Designer / Draftsman Tyler Building Systems, Tyler, Texas (Headquartered in Tyler, TX – Manufacturing custom metal building systems since 1968) About Tyler Building Systems: Tyler Building Systems is a leading manufacturer of high-quality, custom-engineered metal building systems. From commercial warehouses and industrial facilities to churches, recreational spaces, retail buildings, and agricultural structures, we deliver durable, tailored solutions built with American-made steel right here in Texas. We're committed to providing exceptional value, personal service, and reliable expertise for every project. Position Overview: We are currently seeking motivated Entry-Level Designers/Draftsmen for full-time positions on our design and drafting team. This is an outstanding opportu

Longview, TX • (30.4 miles) • Full Time • 11/3/2026

Commercial Refrigeration InstallerPosition Overview Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends. The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carrying gr

Tyler, TX 75706-6031 • (32.3 miles) • Full Time • $21.00 to $23.00 / hr • 11/3/2026

The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities. Attention!!! This position is REQUIRED to work weekends. There will be multiple positions hired from this posting. Minimum Qualifications: Must be able to complete all job positions below

Flint, TX 75762 • (35.4 miles) • Full Time • 11/3/2026

PM Service Technician HTX Material Handling – Tyler, TX Are you ready to grow your career in a thriving industry? HTX Material Handling is seeking a skilled Planned Maintenance (PM) Service Technician to join our expanding team in Tyler, Texas. We are a leading material handling equipment distributor representing premium global brands such as Linde and Baoli. Since opening our doors in 2019, we’ve been committed to delivering exceptional service to customers across Texas. This is the perfect opportunity to join a fast-growing company with excellent pay, benefits, and training opportunities to help you advance your skills and career. Position Overview As a PM Service Technician, you will be responsible for performing planned maintenance, diagnosing issues, and repairing forklifts and materi

Marshall, TX • (42 miles) • Full Time • 11/3/2026

Service Technician position. TO APPLY - PLEASE USE THIS LINK! We may not receive your application if you do not utilize THIS link: https://patterson-marshall-chrysler-dodge-jeep.verahr- hiring.com/job/98170/service -technician

Longview, TX • (30.4 miles) • Full Time • $90,000 to $115,000 / yr • 11/2/2026

Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016. Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations. Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes. Ensure the application of advanced quality tools to

Tyler, TX 75706 • (38.4 miles) • Full Time • 11/2/2026

SNELLING is currently recruiting for a CNC Programmer a manufacturing company in the Tyler area with a pay rate of $25.00/hr – $36.00/hr. Schedule is Monday–Friday during standard day shift hours. We are seeking an independent proactive CNC Programmer to create, prove out, and optimize CNC programs using Mastercam and SolidWorks. This role also involves selecting tooling, generating first-article parts, and providing cost estimates for customer quotes. Key Responsibilities: Create CNC programs from engineering prints using Mastercam and SolidWorks. Generate and prove out first-article part machining to ensure quality and accuracy. Identify and recommend appropriate tooling for each job, utilizing existing inventory or suggesting new tooling. Provide cost estimates to support accurate custo

Henderson, TX • (5.5 miles) • Full Time • 11/1/2026

West Fraser's Henderson sawmill is hiring for an entry-level general labor role. The Operator Apprentice position is an entry-level role with the expectation that self-motivated individuals will advance into progressively skilled positions. The successful applicant will be allowed an appropriate amount of time to train for this job and must be willing to cross-train within any department. This roll also includes forklift operators. What you will do: Must be willing to perform entry level lumberyard duties, housekeeping duties, including use of a shovel, ground keeping, painting, janitorial, etc. Must be willing to stack various lengths of lumber May be assigned tasks indoors and outdoors, no matter the weather conditions Monitor lumber movement Move lumber through the process ensuring no l

Longview, TX 75602 • (27.8 miles) • Full Time • 11/1/2026

Other Forms of Compensation: Yearly Bonus Opportunity Growth. Opportunity. Excellence. Fresh & Ready Food Group is a member of Canteen. Canteen sets the national standard for excellence in automated retail, and EVERY segment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel our growth . YOU bring enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. TOGETHER we’ll continue transforming the micro-market, dining, coffee, and vending industry. Come grow with us. We are Canteen. Job Summary: The Production Manager (Ready-to-Eat Foods) is responsible for planning, directing, and coordinating daily production operations within a food manufacturing facility. This role ensures the efficient

Nacogdoches, TX 75964 • (31.4 miles) • Full Time • $50,000 to $90,000 / yr • 10/31/2026

Motorhome Service Technician At Motorhomes of Texas Top Performers Can Earn $90,000 + per year. Awesome work atmosphere, great benefits, no weekend work, and lots of room for growth! Motorhomes of Texas, a luxury motorhome dealership, is growing and in need of Service Technicians. We are looking for individuals with good mechanical ability to learn how to diagnose and repair RV systems and accessories. The technician plays a very important role in our business by providing excellent repair and maintenance services for luxury motorhomes. We are seeking candidates who are dedicated to and take pride in their work. We will train the right candidate; you bring the enthusiasm, character, drive, and desire to be successful! Key Responsibilities: Accurately diagnose electronic problems and determ

Overton, TX 75684 • (14.3 miles) • Full Time • $20.00 to $28.00 / hr • 10/31/2026

Overview We are seeking a skilled and detail-oriented CNC Machinist to join a dynamic team. As a CNC Machinist, you will play a crucial role in the production process, utilizing your expertise to operate and maintain CNC machinery while ensuring precision and quality in every part produced. If you have a passion for machining and a commitment to excellence, we want to hear from you! Responsibilities Set up and operate CNC machines to produce high-quality parts according to specifications. Read and interpret blueprints, technical drawings, and CAD models to determine machining operations. Monitor machine operations and make adjustments as necessary to maintain quality standards. Perform routine maintenance and troubleshooting on CNC equipment to ensure optimal performance. Inspect finished

Center, TX 75935 • (44.2 miles) • Full Time • $163,000 to $215,000 / yr • 10/30/2026

Position Summary - Plant Manager (Poultry Processing Plant): The Plant Manager oversees all functional operations of a poultry processing facility, ensuring efficient production, safety, quality, compliance, and continuous improvement across all shifts and departments. Key Responsibilities: Manage all functional areas in a poultry processing plant including production, maintenance, safety, shipping, receiving, sanitation, scheduling, and quality. Oversee three production shifts to ensure optimal performance, efficiency, and product output. Lead and mentor department managers to build strong leadership skills and workforce capability. Resolve issues related to product quality, incoming materials, and outgoing shipments. Review cost, performance, and efficiency data to identify improvement o

Kilgore, TX 75662 • (20.7 miles) • Full Time • $20.00 to $24.00 / hr • 10/30/2026

A day in this role You’ll begin by reviewing blueprints for drilling and geotechnical parts, selecting the right alloy, and deciding whether to hand-write G-code or generate toolpaths in CAM. You’ll mount fixtures, set tooling and work offsets, and run a first-article to dial in features to ±0.001". As production ramps, you’ll monitor quality, troubleshoot chatter or tool wear, and document inspection results. Throughout the day, you’ll coach Operators and Assistants, keeping safety and PPE top of mind. What you’ll do Program CNC equipment using G-code and/or CAM software Execute complex setups: fixturing, tooling selection, and offset establishment Machine close-tolerance components from steel, aluminum, and specialty alloys Verify parts against blueprints and maintain dimensional accurac

Flint, TX 75762 • (35.4 miles) • Full Time • $18.00 to $20.00 / hr • 10/29/2026

Job Description Instrumentation and Controls Technician in the upstream and midstream oil & gas industry. This position will be responsible for safely and promptly performing tasks involved with day-to-day maintenance and support of pneumatic systems in order to minimize or resolve downtime. In addition, it requires preventive maintenance skills and the ability to construct pneumatic systems from start to finish. We are asking for the applicant to be local to the East Texas area. Roles & Responsibilities Support I&C Techs and learn all processes and procedures to become I&C Technician. Meet all Safety training requirements need to meet customers safety requirements Learn to maintain equipment and vehicles provided by Pneumatech and keep in good operational condition. Ensuring safety in the

Longview, TX • (30.4 miles) • Full Time • $11.00 / hr • 10/29/2026

Join Our Team as a Back Bakery-Production Team Member Are you passionate about baking and looking for an opportunity to be part of a hardworking team? We're hiring for a Back Bakery-Production role, where you'll play a key part in creating high-quality baked goods and ensuring our bakery runs smoothly. If you have at least one year of experience and are eager to contribute to a dynamic environment, we encourage you to apply in person by filling out a paper application. Responsibilities As a Back Bakery-Production team member, you'll be responsible for preparing and producing baked goods to meet our high standards of quality and consistency. This role involves working behind the scenes to ensure our bakery is stocked with fresh products, managing production tasks efficiently, and maintainin

Longview, TX 75605 • (35.2 miles) • Full Time • 10/28/2026

This position requires extensive travel , with assignments lasting multiple weeks at a time. Daily per diem and hotel accommodations are provided during travel. About the Role: You will help protect critical infrastructure by monitoring, testing, and maintaining corrosion control systems. Depending on your experience level, you may assist with basic field testing or lead advanced inspections, troubleshooting, and program management. this position involves fieldwork, travel, and working outdoors in varying conditions. Minimum Qualifications: AMPP CP2 Certification is required. Ability to follow detailed instructions. Good communication skills and ability to work collaboratively in a team environment. Physical ability to handle tools and equipment, including lifting and standing for extended

Henderson, TX • (5.5 miles) • Full Time • 10/27/2026

Description: POSITION SUMMARY The Foreman of a crew is responsible for overseeing the construction, maintenance and operation of electrical systems, to ensure assigned projects are completed in accordance with design, budget, schedule and safety considerations. Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Requirements: ESSENTIAL FUNCTIONS Provide leadership and direction to crews to ensure safe, efficient, and quality operations. Work with GF in estimating worker requirements, equipment and material, and develop “look ahead” schedules. Ensure crew follows GF’s schedule o

Longview, TX 75602 • (27.8 miles) • Full Time • 10/26/2026

We are hiring immediately for a full time QUALITY ASSURANCE TECHNICIAN position. Location : Fresh & Ready FG TX - 2002 East Cotton Street, Longview, TX 75602. Note: online applications accepted only. Schedule : Full time schedule. Days may vary, 6:00 am to 4:30 pm. Availability to work weekends required. Further details upon interview. Requirement : Previous quality assurance, lot coding, and food quality experience required. Fixed Pay Rate: $15.00 per hour. *Internal Employee Referral Bonus Available Please note that employees in this role will work in a temperature-controlled environment with exposure to cold conditions for extended periods of time. We Make Applying Easy!Just text JOB to 75000 & search for the requisition ID number1570694. The advertised program is a conversational recru

Kilgore, TX 75662 • (20.7 miles) • Full Time • 10/25/2026

Revolution is now hiring a experienced Printing Press Operator in Kilgore, TX. This is a 12-hour night shift schedule. Here is an excellent opportunity for individuals looking for a challenging opportunity with a growing company. Work responsibly in a safe manner, following all safe operating procedures and posted requirements. Follow work guidelines and adhere to all company policies. Sustain productivity and quality standards. Handle products according to customer specifications and the company's production standards. Stage printed rolls in conversion Load/Unload ink chambers and trays from the machine. Set/Adjust impression, registration, and web guide. Responsible for all machine adjustments and job set-ups. Handle and store wastewater and all inks properly. Observe rolls for splices a

Longview, TX 75604 • (29.8 miles) • Full Time • 10/25/2026

Description: The Quality Manager provides technical and quality leadership across the production process. This role oversees the Quality System, analyzes production and supplier sample data, communicates findings to appropriate personnel, and ensures compliance with applicable requirements. The Quality Manager also participates in daily and monthly quality and safety audits of equipment and personnel. Key Responsibilities Quality Leadership and Operations · Approach all work, decisions, and communication with a focus on improving quality and eliminating waste. · Stop any operation that is not producing products that meet customer expectations or that violates approved quality or safety standards. · Collaborate effectively with other divisions within INDEVCO Group to drive improvements. · C

Longview, TX • (30.4 miles) • Full Time • $20.00 to $22.00 / hr • 10/23/2026

Plunkett's – Own Your Route – Set Your Schedule – Grow Without Limits At Plunkett's, our technicians do more than treat pests. They solve problems and help customers feel safe and comfortable. As a Service Technician, you'll manage your own route, provide pest control services, and build strong customer relationships.This route services Longview and the surrounding area. __________________________________________________________________________________________________________________________ Training Pay is $20.00 - $22.00 Per Hour + Uncapped Sales Incentives! What Makes This Role Different You set your schedule Flexible hours mean you work when it makes sense. No micromanaging, no fixed 9-to-5. Plan your day, prioritize stops, and build lasting client relationships. Your own territory Man

Tyler, TX 75703 • (30.6 miles) • Full Time • 10/23/2026

Production Manager Cable’s Roofing is always interested in connecting with experienced professionals who may be a strong fit for our team. While we are not actively filling this position at this time, we are keeping our options open for an experienced Production Manager for our Tyler, Texas office. This role is responsible for overseeing the day-to-day production of roofing projects from scheduling through completion. The Production Manager works closely with Project Managers, crews, suppliers, sales, and office staff to make sure jobs are properly prepared, completed efficiently, and closed out accurately. The right person will be organized, proactive, accountable, and comfortable managing both people and moving parts. Strong communication and follow-through are extremely important in thi