Fort Worth, TX 76140 • (43.2 miles) • Full Time • 9/12/2026

Job OverviewThe Manufacturing Warehouse / Material Technician supports production and warehouse operations in a stateoftheart manufacturing facility by ensuring materials, equipment, and work areas are ready to support safe, efficient, and uninterrupted manufacturing.This is a handson, hybrid role working across the manufacturing floor and warehouse. The position reports to the Production Manager and plays a key role in material flow, equipment readiness, safety compliance, and product quality.Schedule & Shift Details12hour shifts$3.00/hour shift differential for night shiftsBuiltin extended time off due to rotationKey ResponsibilitiesManufacturing & Production SupportEnsure production machines are supplied with required raw materials.Prepare materials and equipment for startups and change

Red Oak, TX 75154 • (39.8 miles) • Full Time • 9/10/2026

Aircraft Assemblers with 5plus years of experience for a long-term contract.Assembler $35hr+per diem if qualified Location Red Oak, TX & Dallas, TXMust have aviation experience and be open to any shift.G.E.D. or EquivalentANDHave a minimum of5years’ experienceasan aircraftassembler or experience in manufacturing, or in a similar industry thatdemonstratesthe following skillsets:1. Drilling close tolerance holes and installation of manufacturing hardware2. Use of power tools (pneumatic and electric, including drills, rivet guns, torquing wrenches, etc.).3. Read and interpret technical drawings and blueprints.?ORSuccessfully complete approved Bombardierinitialtraining programANDSuccessfully pass an entrance assessmentdemonstratingbasic technical skills (applicable to all the above prerequisit

Midlothian, TX 76065 • (32.7 miles) • Full Time • 9/9/2026

ADVANCEMENT OPPORTUNITIESOperations Division ChiefOperations & Maintenance ChiefOperations & Maintenance Supervisor IIOperations & Maintenance Supervisor IOperator, ChiefOperator, SeniorOperator IIIOperator IIPOSITION SUMMARYThis position is responsible for performing the duties in the operation of water or wastewater treatment plant or a raw water pump station. Duties involve routine inspection of plant processes and equipment. Works under close supervision while consulting with direct supervisor when changes are necessary.ESSENTIAL DUTIES AND RESPONSIBILITIES1. Monitors plant operations by observation, instrumentation and laboratory test results and makes adjustments to predetermined parameters.2. Monitors plant process using field instrumentation and process knowledge. Performs laborato

Midlothian, TX 76065 • (32.7 miles) • Full Time • 9/9/2026

Why Join Quality Tube USA?At Quality Tube USA, our people and our products are at the center of what we do. We are committed to manufacturing quality steel products while providing dependable service to our customers and creating a safe, productive workplace for our employees.These are exciting times! This is our first US- Steel Pipe & Tube Manufacturing Plant.We are hiring for the following Mill Positions. Pay DOE!Key OperatorForming Machine OperatorFurnace OperatorAccumulator OperatorCut Off OperatorSizing OperatorCoating Line OperatorPackaging Operator20-Ton Crane OperatorPress Helper (Coating Line Operator)Forming / Taping Machine Helper 1Forming / Taping Machine Helper 2Furnace Key OperatorForklift OperatorCrane OperatorProduction HelperWelderElectronics TechnicianElectrical Technicia

Ennis, TX • (35.6 miles) • Full Time • 9/9/2026

Miscellaneous and Structural Steel Fabrication Shop Quality Control InspectorMust have prior experience in steel fabrication QC of miscellaneous (stairs and hand rails) and structural steel.Position will have a main focus of checking dimensions and accuracy of steel products fabricated in the shop as well as documenting of project hours and inventory control.This position will require a self starter with strong communication, organization and team motivation skills. We need a candidate with quality Control, safety background and inventory control experience.Bilingual a plusHealth, life, dental and vision insurance.PTO after 90 daysMonday - Friday 7:00 to 3:30Job Type: Full-timeBenefits:Dental insuranceHealth insuranceLife insurancePaid time offVision insuranceExperience:Steel Fabrication:

Arlington, TX 76001 • (43 miles) • Full Time • 9/9/2026

Eagle Machine Services, Inc. is one of the nations leading distributors. Manufacturers of CNC controlled machining centers. We are currently looking for highly qualified and motivated candidates with a minimum 2 plus years of CNC experience. Person must have experience and/or education in CNC controls, motion control, hydraulics and pneumatic systems. Candidate must have experience with vertical and turning machining centers and Fanuc control experience. A good mechanical aptitude is required. Disassemble/reassemble equipment for repair. Inspect, test and analyze test results, error codes, as well as gather info from operators to troubleshoot / repair CNC machinery.Strong customer relations, problem solving, and self motivation skills are necessary.-Flexible Schedule-Ability to travel-Comp

Midlothian, TX 76065 • (32.7 miles) • Full Time • 9/5/2026

SUMMARY:Provides clerical assistance to the Encapsulating and HKSORT Department.ESSENTIAL DUTIES AND RESPONSIBILITIES:Includes the following, but other duties may be assigned as company’s needs dictate.Inputs daily production via computer and RF device.Orders materials needed for daily and weekly production.Verifies product and LOT numbering for daily production.Compiles and records production data from daily production logs.Completes, organizes, files attendance paperwork for the Encapsulating Department.Orders supplies and materials such as: shrink wrap film, glue guns, glue sticks, first aid supplies, etc.Keeps inventory records of the supplies and materials in the departments.Compiles general production reports.Distributes and collects Human Resources related forms.Assists Production S

Midlothian, TX 76065 • (32.7 miles) • Full Time • 9/4/2026

We are seeking a Fabricator - Tig Welder and Assembler to become an integral part of our team! Using specialized equipment to weld and assemble products for municipalities across the USA.Responsibilities:Manufacture and fabricate finished metal productsInstall and repair various equipment and componentsFollow blueprints to meet productspecificationsCalculate material measurements to verify specificationsConduct tests to evaluate weld quality and toleranceRegular Shop Duties; Cleaning, Warehousing, Crating and Maintenance.Run Errands; Pick parts up, delivery.Qualifications:Previous experience in Tig & Mig welding, manufacturing, Woodworking and AssemblingFamiliaritywith welding tools and proceduresFamiliarity with engineering blueprints and schematicsAbility to handle physical workloadPunct

Mansfield, TX • (38.7 miles) • Full Time • 9/4/2026

We are looking for enthusiastic individuals who are ready for a career change or are just starting out and are interested in a customer-oriented position that offers extensive training and the potential for advancement.Being part of our team means being part of a family of professionals who strive to be the best. We work together to provide our Homeow with the best service possible, and in return, we enjoy a positive and rewarding work environment.Our focus is on developing a team of people who are excited about helping others and are ready to take their careers to the next level. The ideal candidate is a positive, energetic person with great interpersonal skills.As part of the onboarding process, we offer training designed to ensure your success in your new role. This includes paid traini

Ennis, TX • (35.6 miles) • Full Time • 8/29/2026

Production Manager - ManufacturingSummary:The Production Manager is responsible for all daily activities within the plant including production functions, plant organization, housekeeping and other duties as required. The Production Manager is also involved with all plant personnel including hiring, employee development, terminations and disciplinary actions. This position is 1st shift, requires the flexibility to work 40+ hours per week and weekends as required. The Production Manager reports directly to the Plant Manager.Responsibilities:The responsibilities of this position include, but are not limited to:• Practice proper PPE compliance and maintain a safe working record and environment• Maintain communication with other manufacturing facilities and offices• Immediately communicate unsa

Mansfield, TX • (38.7 miles) • Full Time • 8/28/2026

Fort Worth, TX | $30–$34/hr | 1st or 2nd ShiftWe're Looking for People Who Want to ExcelAtLeaman Container, we don't just hire for a positionwe look forgreat people who want to be part of a great team.The people who succeed here:Show up and are on time.Their team can count on them.Want to excel.They take pride in their work and aren't satisfied with "good enough."Lead and follow.They step up when needed and support others when it's their turn to lead.Take ownership.They solve problems instead of walking past them.Are team players.They understand we succeed together.Are coachable.They can teach, learn, give feedback, and receive it.Most importantly, they live our Core Values:Find A Way to Say Yes Look for solutions.Operational Excellence Do it safely, efficiently, and right.Trust & Respect

Burleson, TX • (37.4 miles) • Full Time • 8/26/2026

Job SummaryPosition reports to Paint & Assembly Supervisor and is subordinate to the team leader.Areas of responsibility include assembling products, installing power transmission and pneumatic components as instructed by Team Leader.Duties may include occasional welding.Job Duties Perform final assembly of H&S products.· Follow instructions of Team Leader Work with Team Leader and Team Members to meet job requirements, quality standards and schedule dates.· Ensure that sub-assemblies are installed properly.· Identify and/or confirm defective items and report them to the Team Leader for disposition.· Follow all quality procedures and standards.· Ensure proper torque on all assembly fasteners.· Maintain accurate time sheet. Maintain organization in team’s work areas.· Follow Supervisor’s an

Mansfield, TX • (38.7 miles) • Full Time • 8/26/2026

Tired of Sitting at a Desk All Day Tracing 2D Blueprints?If you are a skilled CAD Drafter who feels stuck in a cubicle, micromanaged, or divorced from the actual machinery you designit is time for a change.At Sentrimax Centrifuges, we don’t want CAD operators who just push buttons. We are looking for a true mechanical problem-solver. Someone who wants to step onto the shop floor, put their hands on real-world industrial rotating equipment, grab a micrometer, and solve fitment puzzles that keep heavy industry running.If you know how metal gets cut, love reverse engineering physical parts into clean SolidWorks models, and want to work in an environment where your work directly impacts shop production every single day, let’s talk.Why Top Drafters Make the Switch to Sentrimax:No Cubicle Confin

Waxahachie, TX 75165 • (30.9 miles) • Full Time • 8/21/2026

Job Description: Quality ManagerReports To: Quality Director and PresidentThe Quality Manager is responsible for developing, implementing, and leading the plants Quality Management System (QMS). This position provides strategic and operational leadership for all quality assurance and quality control activities throughout the manufacturing process.Reporting directly to the Quality Director and President, the Quality Manager will establish quality systems, policies, procedures, and performance standards while serving as the plants primary quality leader. This position is responsible for building the quality program from the ground up, developing sustainable processes, driving continuous improvement initiatives, ensuring compliance with customer and regulatory requirements, and fostering a cu

Arlington, TX 76001 • (43 miles) • Full Time • 8/21/2026

General Summary This position works under minimal supervision and is responsible for operating one or more of the Injection Molding Production Lines as assigned that shift.Duties and Responsibilities (essential duties are italicized) 1. Production line operation a. Pulls work orders at the beginning of the shift and throughout the shift as needed. b. Verifies work order labels and data, ensuring accuracy prior to starting production. c. Inspects product type, label, color, and molding uniformity. d. Loads appropriate label file. e. Runs production equipment at standard rates set by Company. f. Begins production run, per work order. g. Comfortable using a weight scale for accuracy. h. Prints and labels boxes. i. Pulls flattened case boxes and assembles enough of them for that shift.j. Print

Fort Worth, TX 76140 • (43.2 miles) • Full Time • 8/20/2026

The Plant Supervisor will report to the Plant Manager and direct the activities of our fabrication shop. Departments to oversee will include, fabrication, welding, polishing, and assembly. The position will manage the daily operations of the shop, including keeping the departments on schedule, providing guidance on technical and quality issues.Other duties will be to support the employees to ensure they have all of the equipment and tools needed to be successful in their job as well as ensuring they are working in a safe manor. \nCompany DescriptionWe are an originator in the material handling containment systems industry, offering high quality bulk handling supplies since 1946. Located in an industrial park in Ft. Worth, Texas, we offer filling, packaging, blending, processing, shipping,

Crowley, TX 76036 • (42.7 miles) • Full Time • 9/11/2026

Build your future with VoltVolt is immediately hiringProduction WorkersinFort Worth, TX.Entry LevelWeekly PayAs aProduction Workeryou will:Operate equipment necessary to manufacture customer products.Equipment can include saws, nail guns, staplers, hammer, band cutters, bander, pallet jack, and tape measureRegular and reliable attendanceMonitor quality of product being produced and notifies the lead or supervisor of any issuesComplete production paperwork as required, accurately, and completelyMaintains a safe and clean working environment by complying with verbal and written procedures, rules, and regulations throughout shiftFill out your productivity sheet and shipping tag legiblyThis is afull-time, temp to hireopportunity.The idealProduction Workercandidate will have:Knowledge of hand t

Lancaster, TX • (45 miles) • Full Time • 9/10/2026

Job Title: Machine OperatorCompany Location: Lancaster, Texas19020 We are seeking a dedicated and skilled Machine Operator to join our dynamic team. Our commitment to excellence drives us to continuously improve our processes and deliver outstanding results. In this role, you will play a vital part in maintaining the high standards we set for our operations.Roles and Responsibilities: - Operate and monitor various types of machinery to ensure safe and efficient production. - Conduct routine inspections and maintenance on machines to prevent downtime. - Collaborate with team members to optimize production processes and improve product quality. - Follow all safety protocols and guidelines to create a safe working environment. - Document production data and report any issues or anomalies to s

Joshua, TX • (34.8 miles) • Full Time • 9/6/2026

Leeco Steel is a leading supplier of steel plate from the premier mills worldwide.Due to our continued growth we are seeking an additional Crane Operator, Kinetic, Oxy Fuel and Parts Cleaners for our Joshua, TX location.Previous experience with operating an overhead crane would be ideal.Job Purpose:Controls warehouse inventory by coordinating movement ofsteel fromreceiving to warehouse to shipping.Duties:* Receives orders, loads and process steel distribution using an overhead crane.* Stores product by designating storage areas; adjusting storage areas according to production and shipping requirements; updating location inventory.* Prepares product for shipment by verifying location; directing movement to staging area; resolving problems.* Verifies product inventory reports by comparing lo

Waco, TX • (31.3 miles) • Full Time • 9/5/2026

Manufacturing Machine Operator Pay: $19.00–$23.00/hour DOE Shifts: Days & Nights Available Schedule: Full-time | Manufacturing Environment Job Type: Temp-to-Hire Diversified Sourcing Solutions (DSS) is hiring experienced Manufacturing Machine Operators for a great opportunity with a growing manufacturing team. If you have strong mechanical skills, manufacturing experience, and enjoy working hands-on, we want to hear from you! What You'll Do Safely and efficiently operate manufacturing equipmentSet up machines and equipment for daily productionMonitor production to ensure products meet quality specificationsTroubleshoot equipment and identify potential mechanical or production issuesPerform basic equipment adjustments and help minimize downtimeFollow standard operating procedures and safet

McGregor, TX 76657 • (42.8 miles) • Full Time • 9/5/2026

CAD Drafter/Designer (This role will sit in the Waco TX area) Job DescriptionWe are seeking a CAD Drafter/Designer to join our engineering team. This role involves supporting the design, modification, and documentation of hardware used in test operations and ground support systems. The successful candidate will work closely with engineers to translate concepts and designs into detailed manufacturing and fabrication drawings. The ideal candidate will have experience creating production-ready drawings, managing revisions, and thriving in fast-paced engineering environments where designs quickly move from concept to fabrication. This role will sit in the Waco TX area.ResponsibilitiesCreate and revise detailed 2D and 3D CAD models and drawings for mechanical systems and Ground Support Equipmen

Lancaster, TX • (45 miles) • Full Time • 9/4/2026

Automation Technician IIIEssential FunctionsProviding Plant Support for Niagara Facilities• Provide aid and expertise to plant maintenance teams and internal Engineering Technicians• Aid in any needed repairs on production machinery, as necessary• Provide information on needs for long term success of facilities, including but not limited to the Focus Line ProcessDiagnostic Visits• Identify problems and wear & tear on machine centers for every line.• Perform root cause analysis for corrective actions• Develop suggestions for parts and labor needed during annual rebuilds/overhaulsAnnual Rebuilds/Overhauls• Work on teams of 4, along with plant maintenance teams• Prepare machine centers to repair/rebuild problems found during Diagnostic VisitsTraining• Attend machine center specific master cla

Woodway, TX 76712 • (34.5 miles) • Full Time • 9/3/2026

Job Opening: Experienced Embroiderer – Mattress Manufacturer (Waco, TX) Are you an experienced embroiderer with an eye for detail? Join our leading mattress manufacturing team in Waco, TX and help us create mattress designs that stand out for their quality and craftsmanship! Position: Embroiderer Location: Waco, TX Pay: $17/hour Schedule: Monday – Friday | 7:00am – 4:00pm What You’ll Do:Operate commercial embroidery machines to stitch intricate designs on mattress fabricsEnsure all finished products meet our high standards for quality and consistencyMaintain embroidery equipment and perform basic troubleshootingCollaborate with team members in a busy manufacturing environmentRequirements:Embroidery experience is required (please specify in your application)Familiarity with commercial or in

Lancaster, TX • (45 miles) • Full Time • 9/1/2026

We're hiring for entry-level automotive roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have several positions to choose from:Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffingLot Attendant: move vehicles from one department to the next in our Inspection CentersPhotobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinnersInspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defectsPay: Starting pay for this position is $16/hr.Schedule:Please keep in mind that all locations are subject to mandatory overtime based on business need

Mansfield, TX • (38.7 miles) • Full Time • 8/27/2026

Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more!http:

Waco, TX • (31.3 miles) • Full Time • 8/18/2026

Are you ready to take the next step from skilled Installer to jobsite leader? At Groundworks, North America’s leader in foundation solutions, our CoForeman are driven professionals who are ready to build their skills to grow into a Foreman position. Working sidebyside with an experienced Foreman, you’ll learn how to lead crews, manage daily jobsite operations, and uphold our standards for quality, safety, and customer satisfaction. With handson leadership training, industry-leading certification program, and a clear path to advancement, this role is built for those who want to develop their leadership skills while continuing to do impactful work in the field.The Co-Foreman is a leader as well as a contributor on our crew and an integral part of our success. The Co-Foreman coordinates tasks

Waco, TX • (31.3 miles) • Full Time • 9/13/2026

Description: Forgent is seeking a Mechanical Engineering Manager to lead the mechanical design and drafting function for our liquid-filled transformer product line in Waco, TX. This role owns the mechanical integrity, manufacturability, and continuous improvement of our transformer designs from tanks and radiators to core/coil mechanical structures and bushings/hardware while building and developing a growing team of drafters and engineers. Reporting to the Director of Operations, this leader will balance hands-on technical ownership with people leadership, partnering closely with manufacturing, quality, electrical engineering, and supply chain to deliver transformers that are safe, reliable, and built to last.Essential FunctionsLead and oversee the mechanical engineering function, ensurin

Mansfield, TX 76063 • (38.7 miles) • Full Time • 9/12/2026

Benefits:Health insuranceOpportunity for advancementPaid time offVision insurance401(k) matchingCompetitive salaryDental insurancePosition Overview The Warehouse Assembly Technician is responsible for assembling air compressor packages by bolting components to the package’s framework/tanks, preparing materials, and supporting general warehouse operations. This role is ideal for someone who enjoys handson work in a relaxed warehouse environment, can reliably show up, and is eager to learn. All tools and training are provided by the company. Key ResponsibilitiesUse of hand tools safely operate wrenches, ratchets, drills, and other basic tools.Material handling move, stage, and organize components for assembly.Quality checks ensure all bolts, fittings, and components are secure and properly a

Midlothian, TX 76065 • (32.7 miles) • Full Time • 9/11/2026

Benefits:Free uniformsHealth insuranceOpportunity for advancementPaid time offVision insurance401(k)Competitive salaryDental insurance We are seeking experienced Landscape Maintenance Production Manager for our Midlothian, TX location. Position Overview: The Landscape Production Manager is responsible for driving daily field production by leading crews, coordinating schedules, managing materials and equipment, and ensuring efficient rollout of work across all properties. This role is hands-on and fast-paced, focused on execution, accountability, and keeping production moving safely, on time, and on budget. Key Responsibilities:Crew Leadership & Productivity · Lead, motivate, and push multiple landscape crews to meet daily and weekly production goals · Set clear expectations for crew leader

Mansfield, TX 76063 • (38.7 miles) • Full Time • 9/11/2026

Are you a Texas-licensed mortgage professional looking for a stable, in-office salaried position in the mortgage industry where you can help clients achieve their dream of homeownership?Our industry-leading team is hiring a full-time, in-office Mortgage Production Specialist-Loan Partner to help take our business to the next level as a team!This role works directly alongside the Branch Manager/Loan Officer, helping drive increased loan volume, operational efficiency, and an exceptional client experience.If you have a passion for qualifying clients, structuring loans, and being part of a high-performing team where you can grow professionally alongside strong leadership, this could be the perfect opportunity for you.The Loan Officer will focus on bringing in new business while you focus on:M

Waxahachie, TX 75165 • (30.9 miles) • Full Time • 9/11/2026

Overview Join our dynamic team in Duncanville, TX, as a CNC Machinist! We are looking for a skilled individual who is passionate about precision and quality in machining. As a CNC Machinist, you will play a crucial role in our manufacturing process, ensuring that our products meet the highest standards. If you thrive in a fast-paced environment and enjoy working with cutting-edge technology, we want to hear from you! Responsibilities Set up and operate CNC machines to produce high-quality parts according to specifications.Read and interpret technical drawings and blueprints to ensure accurate machining.Monitor machine operations and make adjustments as necessary to maintain quality standards.Perform routine maintenance and troubleshooting on CNC equipment.Collaborate with team members to i

Waco, TX • (31.3 miles) • Full Time • 9/11/2026

Company Description This is our MD Fill, A2Night Shift: 6pm-6:30am Sunday/Monday/Tuesday & every other Saturday (15% differential (additional pay increase per hour) for working night shiftAbout AbbVieAbbVie's mission is to discover and deliver innovative medicines and solutions that solve serious health issues today and address the medical challenges of tomorrow. We strive to have a remarkable impact on people's lives across several key therapeutic areas including immunology, oncology and neuroscience - and products and services in our Allergan Aesthetics portfolio. For more information about AbbVie, please visit us atwww.abbvie.com. Follow @abbvie onLinkedIn,Facebook,Instagram,XandYouTube.Job Description This is our MD Fill, A2Night Shift: 6pm-6:30am Sunday/Monday/Tuesday & every other Sa

Waco, TX • (31.3 miles) • Full Time • 9/11/2026

Description: Position SummaryThe Quality Control Engineer is responsible for leading manufacturing quality activities and maintaining the effectiveness of the Quality Management System (QMS) for the production of custom-engineered oil-filled distribution transformers. This position provides technical leadership for product quality, process quality, nonconformance management, root cause analysis, corrective actions, and continuous improvement initiatives throughout the manufacturing operation.The role serves as a key liaison between Engineering, Manufacturing, Supply Chain, and Customers to ensure products meet design requirements, customer specifications, applicable industry standards, and company quality objectives. The Senior Quality Control Engineer is expected to drive quality excellen

Ennis, TX 75119 • (37.5 miles) • Full Time • 9/11/2026

The Mechanical Engineer is responsible for the design and redesign of existing products, while paying close attention to continuous improvement and value engineering. Designs include physical perimeter security solutions to include barriers, bollards, bollard covers, wedges, and fencing.Essential Accountabilities:Accurate and complete drawings created and revisions maintained for every product number, manufactured and purchased part number. Creation of accurate, complete and timely submittal drawings according to the documented specifications.Creation of accurate shop drawings with adequate detail to aid the manufacturing process, including a materials list.Meets deadlines and keeps manager informed of known risks.EssentialResponsibilities:Design and redesign perimeter protection products

Mansfield, TX 76063 • (38.7 miles) • Full Time • 9/11/2026

Description: VULCAN is a precision engineering, manufacturing, and machining company dedicated to producing high-performance, mission-critical components and solutions for energy, defense, aerospace, and heavy industrial industries. Whether it’s in the field, in the ocean, or on the launch pad, we deliver maximum value. We are looking to hire a highly capable CNC Mill Machinist at our world-class manufacturing facility in Mansfield, TX.Mill machinists are responsible for machining high-quality complex components that conform to engineered drawings and specifications. The candidate will need to be a critical thinker, have a sharp attention to detail, and follow existing proven processes. Position will work under direct supervision. The candidate must be receptive to receiving guidance with

Mansfield, TX 76063 • (38.7 miles) • Full Time • 9/11/2026

All jobs at Southern Champion Tray (SCT) require Team members to act in accordance with the shared Core Values and Operating principles of the company as they perform specific job functions. These include:Trustworthy – We strive for our actions to match our words in all our relationships.Servant – Hearted – We enable and empower our team to serve the needs of customers, Team members, suppliers and the community.Relational – We aim to build healthy relationships while fostering and environment that promotes compassion, balance, and personal and professional growth.Resourceful – We value strategic insourcing, first looking to create solutions internally, and then looking to apply that knowledge to future opportunities.PRIMARY RESPONSIBILITY: A Die Shop Specialist is responsible for die shop

Fort Worth, TX 76140 • (43.2 miles) • Full Time • 9/11/2026

Junchuang North America, Inc., established in 2023 in the city of Fort Worth, Texas, serves as the company’s North America headquarters. Its parent company, Suzhou Junchuang Auto Technologies, established in June 2005, is headquartered in Mudu Town, Chinaa historic town with a 2,500-year legacy on the shores of Taihu Lake.Pay: $25.00–$30.00 per hourWork Environment:-Modern offices with advanced IT systems-High-tech plastic injection molding facility-Some exposure to typical factory conditions (mild odors, temperature changes)-Strong focus on safety-Key Responsibilities:-Keep work areas clean, organized, and safe-Work with engineering-grade resins-Perform basic maintenance on tools and molds-Change colors and materials as scheduled-Follow quality control and safety procedures-Help meet prod

Fort Worth, TX 76140 • (43.2 miles) • Full Time • 9/10/2026

Who is Mother Parkers?We are one of the largest tea and coffee manufacturers in North America, with a mission to create a better beverage experience for our customers. As a leading customer solutions provider to some of North America’s largest retailers and foodservice chains, we use state-of-the-art technology and new product innovation to help our customers grow their business and deliver superior products to their clientele. Our team of coffee and tea experts are deeply passionate about what we do, proud of our 100+ years of business success, and excited about building a future with endless possibilities. Come join our team and work among the best, collaborate with high performers, and contribute to challenging work every day!The Role:In this role, you will support our Control Room Oper

Hillsboro, TX 76645 • (0.8 miles) • Full Time • 9/10/2026

ABOUT THE ROLEThe Metal Shop Team Lead oversees daily fabrication activities, ensuring production assemblies are completed safely, efficiently, and in compliance with company and PCI standards. This role combines hands-on technical work with leadership responsibilities to guide the team and maintain production quality. Success in this position requires strong welding expertise, equipment knowledge, and the ability to lead by example.SAFETY IS OUR HIGHEST PRIORITY. Safety is our highest priority. We believe a safe workplace is built on mutual respect, care, and accountability. Every team member is empowered and expected to follow safety practices, look out for one another, and speak up about potential risks. Together, we create an environment where everyone goes home safely each day.WHY JOI

Waco, TX 76705 • (26.6 miles) • Full Time • 9/10/2026

Company Description Alamo Structural Steel, LLC is a leading structural steel fabricator in Texas, committed to integrity, quality, and excellence. We take pride in delivering high-quality fabricated steel on time while upholding the highest ethical standards.Job Description Position Summary:As the Fabrication Supervisor, you will coordinate all production activities and ensure day-to-day operations are completed safely and efficiently. This will ensure that quality products are produced and delivered accordingly and cost-efficiently.Minimum Starting Salary:$80,000.00 - depending on education/experienceEssential Functions:Oversee and lead employees in safe equipment operations and instill a culture of zero accidents each day.Document and investigate incidents to continuously improve our sa

Waco, TX 76708 • (27 miles) • Full Time • 9/10/2026

Benefits:401(k)Health insuranceParental leaveManufacturing Engineer Cold Forming Waco, TexasFull TimeSummary: The Advanced Manufacturing Engineer (Machining & Cold Forming) is responsible for developing, optimizing, and supporting high-volume metal manufacturing processes across multiple manufacturing sites and supplier locations. This role focuses on CNC machining, cold forming, cold heading, rolling, extrusion, and secondary operations. The position requires up to 75% travel to support plant launches, process improvements, tooling validation, and supplier development. Must have Cold Forming Experience in a manufacturing environment. Experience with steels and aluminum Responsibilities:1. Machining & Cold Forming Process Engineering Develop, optimize, and validate machining and cold formi