Dickinson, TX • (43.7 miles) • Full Time • $23.00 to $26.00 / hr • 9/21/2026

We are looking for a Traffic Signal Technician to join our team. Job Duties Include: Respond to urgent traffic signal malfunction calls, direct traffic and/or repair signals. Sets and maintains all local timing patterns and closed loop operations, conducts, periodic maintenance on all traffic signals. Oversee and install traffic signals at designated locations installing controller cabinet with loop detector, conflict monitor and/or timer, set and pull span wire and electrical conductor cable, hang traffic signal, make wire connections at signal, cabinet, and power lines, interconnect to existing signals. Monitor and participate in upgrading existing traffic signals and flashing beacons and/or replacement of new equipment, constructs and repairs traffic signals, timers and microprocess

Houston, TX 77069 • (2.4 miles) • Full Time • 10/2/2026

Job Title:Junior TechLocation:Houston and Surrounding AreasSalary:$18.00 - $23.00 per hourAdditional Compensation:Paid Holidays • Paid VacationJob Summary:We are seeking an experienced Junior TechControls Installerto join our team. The ideal candidate will have a strong background in electrical and controls installation, with at least 2 years of experience running conduit and installing control devices on HVAC systems (AHU, FCU, FPB, VAVs). This position requires proficiency in conduit installation and low-voltage wiring termination.Key Responsibilities:Run electrical conduit (3/4" and 1-inch).Read and interpret control and mechanical drawings.Pull and terminate low-voltage cables.Install control devices on air handling units (AHUs), fan coil units (FCUs), fire protection panels (FPBs), an

Houston, TX 77070 • (4.5 miles) • Full Time • 10/2/2026

Estimator[1] – Role of the Estimator:1. Responsible to develop accurate and timely proposals and estimates in support of short and long-term organizational strategic goals, helps build key customer and trade contractor relationships, partners with business development in new business opportunities, and maintains extensive knowledge of current costs, market conditions and competitor analysis.2. The Estimator is accountable to the Senior Estimator, executive team and partners with the business development manager and other key staff to increase sales hit ratio and maximize fee potential. Through accurate, complete, and professionally presented estimates/bids, the Estimator assists with positioning Paradigm as the most respected general contractor in the Houston market amongst owners, archite

Houston, TX 77070 • (4.5 miles) • Full Time • 10/2/2026

The Senior Project Architect will be responsible for managing JRMA’s Houston Architectural group including mentoring, training, and technical design oversight. In addition to architectural group management responsibilities, the individual will have a balanced responsibility between project management/leadership and business development activities. The ratio of those two activities will be based on the individual’s skill set, experience, and connections within Texas and the region.This role will be part of the company’s overall Architectural Department leadership team with primary reporting to the Director of Architecture and collaboration with the JRMA Market Sector (Commercial/Industrial/Manufacturing, Aviation, Solid Waste) Directors.The Senior Project Architect will join an employee-own

Houston, TX 77040 • (5.9 miles) • Full Time • 10/2/2026

TADCO Roofing and Waterproofing is a premier commercial roofing specialist dedicated to delivering exceptional roofing solutions from conception to completion. With locations in Houston and the Rio Grande Valley, we pride ourselves on building long-term partnerships with our employees, suppliers, manufacturers, clients, and stakeholders. Our commitment to safety, quality, and value is the cornerstone of our operations, and we strive to earn trust one roof at a time.We are looking for a skilled commercial Project Manager whose primary function is to oversee commercial roofing projects from initiation to completion, ensuring adherence to timelines, budgets and quality standards. ResponsibilitiesRoofing Expertise: Demonstrate extensive knowledge and experience in various commercial roofing sy

Houston, TX 77041 • (8.1 miles) • Full Time • 10/2/2026

Description: We are seeking a skilled Welder/Fitter to join our team. As a Bench Welder - 2nd Shift, you will be responsible for fabricating and assembling metal structures and equipment. This is a full-time position with competitive pay and benefits.Responsibilities not limited to:Perform welding and soldering tasks to join metal componentsRead and interpret blueprints, schematics, and engineering drawingsUse basic math skills to measure, cut, and shape metal piecesOperate various tools and equipment such as welding machines, grinders, and calipersAssemble and weld components according to specificationsInspect finished products for quality and accuracyCollaborate with team members to ensure efficient workflowAdhere to safety guidelines and maintain a clean work environmentRequirements: Sk

Houston, TX 77080 • (9.8 miles) • Full Time • 10/2/2026

Position SummaryThe In-House Construction Recruiter is responsible for sourcing, attracting, and hiring skilled professionals for construction and related roles within the organization. This role partners closely with project managers, operations leaders, and HR to ensure the company maintains a strong pipeline of qualified candidates for field and corporate construction positions. The recruiter manages the full recruitment lifecycle while helping the organization meet workforce demands across projects.Key ResponsibilitiesRecruitment & Talent SourcingManage the full-cycle recruitment process for construction positions, including field staff, skilled trades, supervisors, project managers, and support roles.Source candidates through job boards, industry networks, trade schools, unions, refer

Houston, TX 77043 • (11.1 miles) • Full Time • 10/2/2026

Master Electrician – Custom Residential HomesLocation: Houston, TXCompany: Powered SolutionsJob Type: Full-TimeCompensation: Competitive Pay (Based on Experience) + BenefitsAbout UsPowered Solutions is a premier electrical contractor specializing in highend, custom residential projects throughout the DFW area. From luxury new builds to architectdesigned remodels and advanced smarthome systems, we deliver exceptional craftsmanship and a seamless client experience.We’re seeking an experienced Master Electrician who excels in custom residential environments and is committed to upholding the highest standards of safety, quality, and professionalism.Position SummaryAs a Master Electrician, you will serve as the technical authority on custom residential projects, overseeing installations, ensuri

Spring, TX 77380 • (12.6 miles) • Full Time • 10/2/2026

Individual must be able to perform the following duties.Use of CAD software and ability to draft and post process survey data. AutoCAD & Trimble TBC preferred,ESRI ArcMap preferable.Produce finished survey deliverables including but not limited to base mapping, topographic.Develop construction stakeout upload files and hard sheets for survey crews.Process and produce post-construction and AsBuilt data and drawings.Provide and follow quality processes and procedures.Effectively communicate and provide support to internal & external stakeholders and team members.Assist with general office tasks, inventories, equipment shipping and other general support and administrative tasks.QualificationsPreferred Minimum of 3 years of Survey Drafter / Data Technician / CAD experience.Requires knowledge o

Spring, TX 77380 • (12.6 miles) • Full Time • 10/2/2026

Civil Engineer: Project ManagerExperience:civil engineering / land development, 5 years (preferred), 3 years (minimum)Professional Engineer, P.E. (preferred)MatkinHoover Engineering and Surveying is seeking a highly ambitious and experienced Licensed Professional Engineer, to join our fast-growing Spring, Texas team. The ideal candidate is talented, results driven, who desires a high degree of independence and responsibility.Company Bio:MHES is a well-established engineering firm founded in 2002 in Boerne, Texas. MHES provides civil engineering design, land surveying and development services for commercial, residential, and governmental developments. From its conception, Matkin Hoover’s entrepreneurial vision has been to provide quality engineering and surveying services to clients with th

Spring, TX 77380 • (12.6 miles) • Full Time • 10/2/2026

M&S Engineering is seeking an experienced, licensed Civil Project Engineer (P.E.) to lead and stamp engineering deliverables for horizontal directional drilling (HDD) and directional boring projects. Our current project portfolio includes crossings beneath USACE-regulated levees and flood risk management (FRM) structures, freshwater delivery canals, TxDOT highways, waterways, and railroad corridors. This role demands hands-on expertise in USACE Section 408 permitting, hydraulic fracture analysis, and HDD bore path design and general civil or utility infrastructure experience. The PE of Record will also carry a formal mentorship responsibility for junior engineering staff working toward their own PE licensure.ResponsibilitiesDesign & Technical LeadershipServe as PE of Record lead design, st

Spring, TX 77386 • (13.3 miles) • Full Time • 10/2/2026

RyconConstruction is an employee-owned company (ESOP) that provides construction management, general contracting, design-build, and program management services nationwide. An ENR Top 400 Contractor, ENR Top 100 Green Contractor, and BD+C Top 150 Contractor with nine offices,Ryconspecializes in new construction, renovations, and adaptive reuse projects. From large-scale developments to small, fast-track interior fit-outs,Ryconis equipped to deliver a comprehensive range of services across all project types.Rycon’sportfolio includes projects in aviation, healthcare, higher education, industrial/warehouse, commercial, multi-unit residential, student housing, food service/dining, data centers/mission critical, retail, financial, self-storage, government/municipality, and LEED facilities. We ha

Houston, TX • (13.6 miles) • Full Time • 10/2/2026

Lead Data Engineer / Snowflake Data Architect - Houston, TXiSphere is looking for a Lead Data Engineer / Snowflake Data Architect for a long-term hybrid opportunity in Houston. You do need to live in the Houston area.Our client is building out a modern Snowflake platform for Trading Risk, and they need someone who has done more than inherit an environment and keep the lights on. They want someone who can help decide how this thing should be built, get their hands dirty building it, and keep the architecture from becoming a pile of exceptions nobody understands a year from now.You will be working across Snowflake architecture, data engineering, security, governance, ingestion, transformation, CI/CD, monitoring, performance, and cost. In other words, the platform stuff that is easy to ignore

Houston, TX • (13.6 miles) • Full Time • 10/2/2026

Position: Team Leader – Commercial Project ManagementFull-Time | Salaried | Comprehensive Benefits + Company VehicleLead projects. Develop teams. Deliver high-impact systems.Our client is seeking a Team Leader to oversee multiple commercial BAS projects from kickoff through warranty. This is a high-visibility leadership role where you’ll drive project execution, mentor field teams, and ensure successful deliveryon time, on budget, and to spec.What You’ll DoProject Execution & OwnershipManage full project lifecycle: scheduling, documentation, and executionAssist with system design and material selectionEnsure projects are engineered correctly, ordered efficiently, and executed smoothlyOversee installations, upgrades, and repairsHandle change orders, re-estimates, and cost control to maintai

Houston, TX • (13.6 miles) • Full Time • 10/2/2026

As a Journeyman Electrician, you will plan layouts, install and repair wiring, electrical fixtures, apparatus, and control equipment. The ideal candidate will mentor and develop Apprentice Electricians as well as promote the core values of FSG through excellent customer service and assuring the safety of all work.**Please call or text Amelia at ResponsibilitiesPrepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring.Plans new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications, safety codes and local electrical codes.Plan l

Houston, TX • (13.6 miles) • Full Time • 10/2/2026

A Manufacturing Welder is responsible for performing high-quality welding, fabrication, and repair of metal components and structures in a manufacturing environment. This role requires precision work on a variety of materials, including stainless steel, aluminum, and specialty alloys, while strictly adhering to safety, quality, and industry standards.Key ResponsibilitiesFabrication & Welding:Perform MIG (GMAW), TIG (GTAW), Stick (SMAW), or Flux-Cored (FCAW) welding in flat, vertical, and overhead positions to join, fabricate, or repair metal components.Blueprint & Technical Interpretation:Read and interpret blueprints, weld symbols, sketches, and work orders to accurately measure, calculate, and assemble components according to specifications.Material Preparation:Prepare metal surfaces by

Houston, TX • (13.6 miles) • Full Time • 10/2/2026

The Arcticom Group (“TAG”) is a U.S.-based network of commercial and industrial mechanical services companies that provide HVACR service, maintenance, and installation services throughout North America. TAG is committed to being an “employer of choice” and ensuring employees have a home where they can learn and grow. With competitive compensation and an attractive benefits package, TAG is an exciting place to work.TAG Refrigerationis seeking a Commercial HVAC Installation Technician to support commercial HVAC construction projects in and around the Houston, TXarea.Role Summary:The Commercial HVAC Installation Technician is responsible for the installation and replacement of commercial heating, ventilation, and air conditioning systems in retail, grocery, industrial, and institutional facil

Houston, TX • (13.6 miles) • Full Time • 10/2/2026

Looking for your next big opportunity? We're always building relationships with top talent for this vital role. Apply todayour team is reviewing applications and eager to connect! Join us in making an impact on Construction as a Project Engineer! Why Thompson Thrift? At Thompson Thrift, we don't just build properties; we craft communities and shape futures. Our core values drive us to positively impact our team and the communities we serve through initiatives like TT Serve, which supports community outreach and personal development. We also prioritize work-life balance with our Family Impact Program, offering flexible work options, concierge medical services, financial planning, and more to support your well-being and connections with loved ones. Your Role as Construction Project Engineer

Houston, TX 77079 • (13.9 miles) • Full Time • 10/2/2026

About ROGIIGet ready to buckle up and meet the powerhouse that's revolutionizing the Oil & Gas industry – ROGII!We're a dynamic team of tech enthusiasts who are not afraid to take risks and bring innovation to the forefront with our comprehensive software solutions. Here at ROGII, we’re all about optimizing well operations and streamlining workflows for clients all over the world. And we’ve been smashing that goal out of the park with products that have been adopted by over 350 clients worldwide!But hey, we're not your average team. We're made up of ROGII Stars – creative, out-of-the-box thinkers who are always developing and improving our products with our users in mind, and you can find us all around the world. With each new day, we're pushing the boundaries of what's possible in our ind

Houston, TX 77056 • (14.6 miles) • Full Time • 10/2/2026

ABGi USA is recruiting on behalf of one of our clients for a Mechanical Drafter to join their engineering team in Sun Valley, California. Our client is an established global manufacturer and engineering organization specializing in advanced automated welding and precision industrial equipment. Their technology supports customers across highly technical industries, including aerospace, semiconductor, power generation, pharmaceutical, and industrial manufacturing.This is a great opportunity for a hands-on Mechanical Drafter who enjoys working closely with engineering and manufacturing teams and wants to continue developing their mechanical design expertise within a specialized technical environment.Position OverviewThe Mechanical Drafter will work closely with and provide direct support to a

Houston, TX 77042 • (15.3 miles) • Full Time • 10/2/2026

Job ResponsibilitiesManagement of project’s contractor and construction processConstruction coordination and scope managementDevelop and review construction schedules and cost estimatesAssist with developing and reviewing change ordersConduct site inspections and reporting to verify construction quality and contract conformanceDevelop and maintain construction progress reportsReview contractor RFIs and submittalsOversee and coordinate with QA field inspectors and materials testing teamsContractor Submittal management and complianceContractor’s adherence to construction documentsReoccurring site visits and logistics managementLiaison between contractor, stakeholders and clientContractor Invoice review and approvalJob RequirementsBachelor’s degree in construction management, architecture or

Houston, TX 77063 • (15.3 miles) • Full Time • 10/2/2026

JOB SUMMARYThis position is responsible for providing both general and specialized engineering services to support EnSiteUSA Project Management in the planning, analysis, estimating and design of primarily natural gas and liquids pipelines; compressor stations; measurement; regulation; and related facilities. This position will be located in Houston, TXESSENTIAL FUNCTIONSPlanning of feasibility studies; FEED development; modeling; conceptual design; permitting; comprehensive understanding of process piping system design; project scope development; capital cost estimating and project scheduling.Design and installation of onshore natural gas or liquids pipeline systems including: measurement & regulation equipment, pigging facilities, mainline valves, and compressor stationsFamiliar with pip

Houston, TX 77027 • (15.4 miles) • Full Time • 10/2/2026

Love Where You Work!If working for a team of dynamic professionals that create award winning projects for some of the world’s most successful companies sounds exciting, rand* construction corporation is where you want to be.Voted a Great Place to Work for 15 years in a row, rand* provides a culture of excellence that offers unlimited growth. We are seeking a dynamic Project Managerlooking for a company where they can learn and grow, and help to expand our reach of extraordinary client service. What you’ll do: The Project Manager is a position of great responsibility, requiring complete technical knowledge of the construction process with a strong focus on quality and client satisfaction. The Project Manager is the main point of contact responsible for the project’s organization, implementa

Houston, TX 77002 • (16.1 miles) • Full Time • 10/2/2026

Job Title: Controls InstallerLocation: Houston and Surrounding AreasSalary: $14.00 - $18.00 per hourAdditional Compensation: Paid Holidays • Paid VacationJob Summary:We are seeking an experienced Controls Installer to join our team. The ideal candidate will have a strong background in electrical and controls installation, with at least 2 years of experience running conduit and installing control devices on HVAC systems (AHU, FCU, FPB, VAVs). This position requires proficiency in conduit installation and low-voltage wiring termination.Key Responsibilities:Run electrical conduit (3/4" and 1-inch).Read and interpret control and mechanical drawings.Pull and terminate low-voltage cables.Install control devices on air handling units (AHUs), fan coil units (FCUs), Fan Power Boxes (FPBs), and vari

Conroe, TX 77385 • (16.7 miles) • Full Time • 10/2/2026

Construction & Project ManagerIntroductionWelcome to Thind Management, a family-owned management company where we strive to provide exceptional service and unforgettable experiences to our guests at our properties. With a passion for hospitality and a commitment to teach, we at Thind Management strive to share our knowledge with team members to reach new heights. We live and breathe Thind’s motto “We’ll Take It from Here”. Our team of experienced leaders are dedicated to delivering the highest standards of training, providing tools, and ensuring professional growth of our team members.Job SummaryWe are seeking a highly motivated and experienced Construction & Project Manager who is responsible for overseeing and managing all aspects of new construction and renovation projects mainly within

Houston, TX 77054 • (20 miles) • Full Time • 10/2/2026

Benefits:Company partiesFree uniformsTraining & development At PuroClean of Central Southwest Houston, we are dedicated to providing top-notch emergency property restoration services, helping families and businesses recover from water, fire, mold, biohazard, and other property damage. We operate with a ‘servant-based leadership’ philosophy and work to create an environment where our team members grow both professionally and personally by serving our customers, communities, and each other. Benefits:Company partiesUniformsPerks:Online mobile coursesFlexible schedulingPaid training for career advancementOpportunity to help people in times of needAggressive competitive wagesJob Position Description: As the Contents Crew you will collaborate with a ‘One Team’ mentality, managing production crew

Stafford, TX 77477 • (23.2 miles) • Full Time • 10/2/2026

About UsAtMaxx Designers, we bring spaces to life. Since 2012, our Houston-based studio has delivered cutting-edge architectural designs forretail, restaurant, office, and industrial spacesacross Texas and beyond. Our ethos blends technical precision with creative vision, shaping environments that serve real business needs with style and function.We’re growing and we’re looking for a licensed architect who shares our passion forsmarter,innovativecommercial design.Role OverviewAs aLicensed Architect, you will lead the design and development of commercial projects from schematic design through construction documents. You’ll translate client needs into strategic architectural solutions that meet code, brand standards, and business goals. You will work closely with internal teams, engineers, c

Sugar Land, TX 77478 • (24.2 miles) • Full Time • 10/2/2026

Company OverviewE Contractors, a prominent General Contractor based in Sugar Land, TX, specializes in collaborating with public and commercial clients. Renowned for our adept project management, we undertake initiatives for municipalities, state and local agencies, independent school districts, colleges, and universities. At E Contractors, we prioritize fostering enduring relationships with clients, centered on dependability, responsiveness, results, and, above all, trust and transparency. Leveraging our extensive industry experience, we stand out as a preferred construction company, attracting top-tier talent dedicated to teamwork and the pursuit of excellence.ResponsibilitiesThe Jobsite Supervisor responsible for planning and ensuring the coordination of construction projects. This role

Houston, TX 77047 • (25.1 miles) • Full Time • 10/2/2026

JOB DESCRIPTION:We are looking for a Project Managerto join our team. The primary function of an RMS Project Manager is to manage and track all phases of a project to ensure the finished product is delivered complete, on time and within budget. The Project Manager will communicate with the customer and all RMS disciplines in a timely manner the progress and requirements needed throughout the duration of the project. An electronic and paper project folder will be kept and maintained on each project.SKILLS REQUIRED:ORGANIZATIONAL - LEADERSHIP AND ORGANIZATIONExceptional ability to multitask, prioritize, and manage time and resources effectively.Excellent time management skills with a proven ability to meet deadlines.Exceptional attention to details.Display ownership and accountability for ta

Houston, TX 77048 • (25.4 miles) • Full Time • 10/2/2026

Metro Ready Mixis currently looking for class B CDL CONCRETE TRUCK DRIVERS with experience in similar construction equipment for our Crosby and Houston plants. We are looking for full time and permanent employees. New pay rates and compensation based on driving experience. Paid weekly and home daily/weekends. Guaranteed 32 hours and quarterly bonus. Come be a part of our family style atmosphere.Requirements:-Musthave Class A or B CDL license with2 years of verifiable experience driving a concrete truck( no permits) * *If you do not have a valid CDL please do not apply!!!-Musthave clean driving record-Musthave good work ethic-Mustbe able to use a GPS-Musthelp maintain trucks in clean and working conditionDuties-Follow company safety policies and proceedures.-Follow federal, state and local

Missouri City, TX 77459 • (29.8 miles) • Full Time • 10/2/2026

Ayva Construction is a company that values hard work, safety, and quality. At Ayva Construction, we don’t just build projectswe build careers. As a leader in commercial civil construction, we specialize in dirt work, utilities, and concrete, delivering top-quality results with no excuses, no delays, and no compromises. We provide a safe and supportive work environment, competitive pay, and opportunities for growth while ensuring every project is completed efficiently and within budget. If you're ready to take your skills to the next level with a company that gets the job done right, apply today.Benefits: Paid Time Off, Flex time (Work From Home), Paid Holidays, Paid Bereavement.Discounts: Various movies, vacation, amusement, shows, gym, and shopping locations. Free Lunch in the Office on T

Montgomery, TX • (32.2 miles) • Full Time • 10/2/2026

ProHunters is hiring experienced Commercial Apprentice Electricians for a long-term project in College Station, Texas. This opportunity offers steady work with strong potential for temp-to-hire placement.Pay & Benefits$24–$35 per hour, based on experience$75 per day per diem, paid for all days workedLong-term, steady employmentOpportunity for permanent placementCourse completion incentive: Employees who complete all required additional OSHA courses and successfully complete their first two weeks of work will receive an incentive payment.Job ResponsibilitiesInstall, maintain, and repair electrical systems on commercial construction sitesBend and install EMT and rigid conduitPull wire and perform electrical terminationsRead and interpret blueprints, schematics, and electrical drawingsPerform

Houston, TX 77066 • (0 miles) • Full Time • 10/2/2026

Clayton Services is searching for aWiremanto join a thriving company in Northwest Houston. TheWiremanwill be responsible for building, assembling, and wiring custom electrical control panels according to drawings and electrical schematics. This is an excellent opportunity for an experienced panel builder or electrical assembler looking to join an established and growing panel shop.Job Type:Temp-to-HirePay Rate:$20.00 - $30.00/hour, depending on experienceBenefits:Excellent benefits are available after the successful completion of the temporary period, including medical, dental, vision, 401(k), PTO, and more.Wireman Responsibilities:Build, assemble, and wire custom electrical control panels according to provided drawings and electrical schematics.Client out components and materials accordin

Houston, TX 77070 • (4.5 miles) • Full Time • 10/2/2026

Civil CAD Drafter / TechnicianWe are seeking an experienced Civil CAD Drafter/Technician with a minimum of five (5) years of professional experience supporting civil engineering, land development, and infrastructure projects. The ideal candidate will have strong proficiency in AutoCAD Civil 3D and the ability to efficiently produce accurate, detailed, construction-ready drawings while working closely with engineers, project managers, surveyors, and other members of the design team.This position will support a wide variety of residential, commercial, municipal, industrial, and infrastructure projects throughout Midland, West Texas, and other Texas markets.Responsibilities:The Civil CAD Drafter/Technician will assist engineers and project managers with the preparation, development, and coord

Houston, TX 77041 • (8.1 miles) • Full Time • 10/2/2026

Installation, inspection, and testing of Electrical and Electronic control systems and equipment, including PLC/RIO, Instrument Termination Boxes, and communications systems with minimal supervision. Layout, measure, fabricate and install tubing trayLayout, measure, and install components within an electrical enclosure per construction drawingsGland and terminate cablesRoute, bend, and install conduit runsRoute and terminate control and power wiring within a control enclosureUnderstand electrical concepts involving power distribution and control signalsTroubleshoot electrical control systemsPerform electrical verifications like loop and continuity checksDocument and redline any drawing discrepanciesAble to read P&IDs and Electrical DrawingsProficient in the use of tools of the tradeAble to

Houston, TX 77092 • (8.8 miles) • Full Time • 10/2/2026

Position OverviewThe primary company representative on the project site responsible for the overall quality, schedule, and successful completion of project(s); master of overall construction knowledge; engages and participates in activities related to project safety, project start-up, production, subcontractor procurement, project cost projections, and schedule requirements to ensure projects are completed in a quality, timely and profitable manner. Maintains a focus on meeting and exceeding customer needs and expectations. Builds relationships with current customers by delivering on commitments.Key Responsibilities (Essential Duties and Functions)Project Cost Responsibilities · Understands the project budget including subcontracts, allowances, contingencies, and General Conditions for del

Cypress, TX 77429 • (9.6 miles) • Full Time • 10/2/2026

SAR ContractingPosition OverviewSAR Contracting specializes in insurance loss and property restoration services. We are seeking a dependable and motivated Water Technician to join our team and assist with the mitigation and restoration of properties affected by water damage.The Water Technician plays a critical role in responding to water-loss situations by assessing affected areas, performing water extraction, operating specialized drying and restoration equipment, and helping return properties to a safe and stable condition. This position requires strong attention to detail, professionalism, physical stamina, and the ability to work effectively in time-sensitive environments.The successful candidate must be comfortable traveling frequently to client locations and participating in on-call

Spring, TX • (10.2 miles) • Full Time • 10/2/2026

The Project Manager will oversee construction projects within manufactured housing communities. This position is responsible for coordinating contractors and vendors, managing project schedules and budgets, ensuring quality workmanship, and keeping projects on track from planning through completion.The ideal candidate is a highly organized, hands-on project manager with construction knowledge and the ability to manage multiple projects simultaneously.Essential Responsibilities:Manage construction projects from planning through completion.Coordinate contractors, subcontractors, vendors, engineers, municipalities, and internal operations teams.Develop project schedules, budgets, scopes of work, and timelines.Obtain and coordinate necessary permits, inspections, and approvals.Oversee manufact

Houston, TX 77039 • (10.2 miles) • Full Time • 10/2/2026

Production TIG/MIG Welder Houston, TX 77039 Pay: $19.24 - $20.71/hr Schedule: Monday - Friday | 5:00 AM - 3:30 PM Build Your Welding Career with a Growing Manufacturing Team! Do you have experience with TIG or MIG welding and take pride in producing quality work? We are seeking a Production TIG/MIG Welder to join our team in Houston, TX. This is an excellent opportunity for dependable welders looking for a stable, full-time position with consistent hours and opportunities to expand their skills.In this role, you'll work on production and prototype components, welding stainless steel and specialty metals while ensuring the highest quality standards are met. What You'll Do Perform TIG and MIG welding on production and prototype parts.Weld stainless steel, precious metals, and specialty mater

Houston, TX 77093 • (11.7 miles) • Full Time • 10/2/2026

We are seeking a reliable, detail oriented LICENSED PLUMBER, to join our NEW CONSTRUCTION - Commercial and Residential team to work in Houston and metropolitan area, TX. The office is located in the North part of Houston near to loop 610 & Hardy Told Road (tolls is not mandatory to take - many ways to get to the office without paying tolls) KEY REQUIREMENTS:License: MUST have Active JOURNEYMAN OR TRADESMAN Plumber License.Experience: Minimun 3 years hands-on plumbing service or construction.Driver's License: Clean driving record and valid TX driver's license to operate.Physical: Ability to work in confined spaces, climb ladders, and lift up to 80 lbs.Need Ground install and Custom Trim Installer.Pay rate is based on knowledge and experience.The company offers benefits, vacation time, and o

Houston, TX 77093 • (11.7 miles) • Full Time • 10/2/2026

Why Pref-Tech?Voted "Top Workplaces" by Houston Chronicle and Austin American Statesman, 2 years in a row! We aim to make “family” a core reason we attract incredible people, retain them, and collectively deliver unequaled quality and service to customers. If your heart and mind are pushing you to join a team who deeply desires to be the best in the world, has a long-game approach to business, prides itself on doing exceptional work, celebrates service to others, and is willing to invest in you, you should consider Pref-Tech.Position Overview:A Design Estimator II at Pref-Tech is responsible for supporting the rest of the Sales team members in the construction of estimates for assigned projects based on Preferred Technologies estimation standards.These are individuals with 3+ years of esti