The Harris County Flood Control District is seeking qualified candidates for the position of Construction Project Manager.
Responsible for implementing the construction phase of the District’s Capital Improvement and Maintenance projects, including administration of professional service contracts for material testing and construction consultants.
Essential Functions and Duties: Ensure quality assurance/quality control of the documentation provided with contractor’s pay estimates. Assist in review and evaluation of contractor’s cross-sections and measured quantities. Investigate and evaluate slope failures and earthen repairs in the field. Review progress reports, recommendations, notifications, confirmations, and other documents relating to construction projects prepared by field inspection personnel. Review material testing reports and invoices and recommend action as a result of failing tests. Attend pre-bid conferences and conduct pre-construction and progress meetings. Review projects prior to completion of plans and specifications to provide constructability evaluation. Liaise with contractors, representatives, property owners, and other parties involved with construction projects. Direct and/or assist field inspection personnel, including resolving conflicts and/or problems. Assist in setting procedures and creating forms for inspection documentation to ensure consistency. Assist in assigning field inspection personnel to construction projects and other tasks as needed. Provide technical advice on specifications and construction management issues. Ensure quality assurance/quality control of construction projects. Assist in developing processes and procedures in the Division to ensure consistency among inspectors. Perform other duties that may be added or changed as the course and scope of the job directs.
Requirements: Bachelor’s degree from an accredited four-year college or university in civil engineering or a similar curriculum. Professional Engineer (PE) in the State of Texas Five (5) years of experience that includes any combination of engineering planning, design, and construction management. Experience with stormwater drainage design and construction. Valid Class "C" Texas Driver’s License Experience with AutoCAD Civil 3D and Bluebeam (preferred) Excellent written and verbal communication skills. Ability to read all types of maps and drawings, especially civil construction plans. Knowledge/understanding of construction standards, practices, and techniques. Can work independently with limited supervision. Ability to review and analyze construction schedules. Excellent organizational skills. Ability to prioritize and manage multiple projects and/or assignments. Excellent knowledge of Microsoft Office applications. Familiarity with SharePoint and Adobe Acrobat Professional. Excellent skills using project management tools and systems. Can work well with the public, interest groups, government agency personnel and external organizations.
Benefits (offered only to employees in regular full-time positions): Medical Coverage Dental Coverage Vision Coverage Wellness Plan Life Insurance Long-term disability Employee Assistance Program Ten (10) days of vacation each year for the first five (5) years of service Accrual rates increase based on years of service Eleven (11) County-observed holidays and one (1) floating holiday Professional development opportunities Dependent Care Reimbursement Plan Healthcare Reimbursement Account 457 Deferred Compensation Plan
The following benefits are also available to regular full-time employment and may be available to part-time employees: Retirement Pension (TCDRS) Flexible schedule (varies by department) Transportation Assistance (Metro RideSponsor Program)

The Flood Control District has the mission to reduce the risk of flooding in Harris County, the third most populated county in the United States, with a population in excess of 4.7 million, including the City of Houston, the nation’s fourth largest city. The Flood Control District has jurisdiction over the primary stormwater facilities in the county, which consist of approximately 1,500 channels totaling nearly 2,500 miles in length, as well as more than 60 regional stormwater detention basins, totaling more than 10,000 acres and several wetlands mitigation banks including Greens bayou.
Harris County is an Equal Opportunity Employer

Location: This role will be based in at Stafford, TXTravel: Up to 10% annuallyWhy you’ll love this role:As a Mechanical Engineer III you will join our dynamic team in designing, developing, and testing mechanical components and assemblies for cutting-edge medical integration systems. This role is essential in driving innovation, ensuring quality, and supporting the development and manufacturing process of our products.What you’ll be doing:Collaborate with Systems Engineers, Product Management, and stakeholders to create conceptual designs.Design and develop durable solutions for mechanical components and assemblies.Perform analytical assessments (e.g., FEA, temperature, tolerance) to optimize designs.Create mechanical test fixtures, tooling, and procedures to ensure production consistency.Research and develop new materials and mechanical technologies for future product lines.Provide technical leadership to mechanical designers and drafters.Participate in design reviews, identifying potential challenges and solutions.Support prototype builds, validation testing, and field issue analysis for existing products.Maintain documentation, including BOMs, design assurance checks, and SAP Material Masters.What You Bring:Required:Experience: 5–6 years in mechanical engineering.Education: Bachelor’s degree in mechanical engineering or related fields.Skills: Proficiency in AutoCAD, SolidWorks, and Microsoft Office Suite.Preferred QualificationsExperience: 7–10+ years in mechanical engineering.Education: Master’s degree in mechanical engineering.Skills: Advanced knowledge of FMEA tools, machining operations, metal finishes, and SolidWorks.Who we are:KARL STORZ is an independent, family-owned company headquartered in Germany’s renowned MedTech manufacturing region. For 80 years, we have pioneered the most groundbreaking innovations in minimally invasive surgery and OR integration to benefit patients and healthcare providers alike. With more than 9,000 associates worldwide and 1,800 in the US, we pride ourselves on harnessing cutting-edge technology, precise workmanship, and unrivaled customer support to help healthcare facilities manage costs, streamline operations, and deliver positive patient outcomes. With onsite locations and field opportunities across the country, we attract a diverse and talented staff, unified by the desire to foster positive change in the world. Because it is not just about the tools we createit is about the lives we change, together.#LI-NM1

At Houston Methodist, the Stationary Engineer 1st Grade position is responsible for operation, maintenance and repair of all fixed building equipment including the Central Utility Plant (CUP) within the hospital campus. This includes setting operational parameters, monitoring and adjusting equipment as needed to maintain code compliance, safety and comfort of patients, staff and visitors while maintaining a focus on energy management. PEOPLE ESSENTIAL FUNCTIONSPromotes a positive work environment and contributes to a team-focused work unit that actively helps one another achieve department goals.Provides guidance and training to other maintenance personnel on proper operations, maintenance and repair of the various operating systems, fixed building and CUP equipment within the hospital.Assists other maintenance staff, as needed, to meet the needs of the department.SERVICE ESSENTIAL FUNCTIONSOperates, maintains and repairs hospital building equipment and CUP to ensure that current hospital codes and operational standards are met while maintaining the comfort and safety of patients, visitors and staff.Provides detailed information to relief operators at shift change, including, but not limited to, planned maintenance activity status, equipment status and any equipment operating outside normal parameters.Coordinates repairs and preventive maintenance with various equipment service providers to meet the needs of the hospital.QUALITY/SAFETY ESSENTIAL FUNCTIONSConducts periodic readings of assigned equipment, entering pertinent information to comply with hospital and code requirements. Appropriately responds to unusual readings, alarms and activities of the equipment and informs leadership of actions taken.Performs preventive maintenance and equipment repairs utilizing hospital procedures, manufacturer equipment manuals and proper tools and techniques.FINANCE ESSENTIAL FUNCTIONSOperates various equipment and building systems to meet operational and code requirements with a focus on minimizing energy consumption.Uses resources efficiently; does not waste supplies. Self-motivated to independently manage time effectively and prioritize daily tasks.GROWTH/INNOVATION ESSENTIAL FUNCTIONSAssists leadership with the selection of new and replacement building systems and equipment to meet the needs of the hospital that is reliable and minimizes energy usage.Performs high-level trainings as a subject matter expert (SME) for department and actively participates in department projects. Assumes responsibility for growth and development by participating in in-services programs and continuing education.This job description is not intended to be all-inclusive; the employee will also perform other reasonably related business/job duties as assigned. Houston Methodist reserves the right to revise job duties and responsibilities as the need arises. EDUCATIONHigh School diploma or equivalent education (examples include: GED, verification of homeschool equivalency, partial or full completion of post-secondary education, etc.) WORK EXPERIENCEFive years experience as a Stationary Engineer LICENSES AND CERTIFICATIONS - REQUIREDSE-1 - 1st Grade Stationary Engineer - City License -- City of Houston KNOWLEDGE, SKILLS, AND ABILITIESDemonstrates the skills and competencies necessary to safely perform the assigned job, determined through on-going skills, competency assessments, and performance evaluationsSufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or securityAbility to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principlesFunctional knowledge of the following building systems:* Mechanical, Electrical and Plumbing operations* Building Automation Systems* Life Safety Systems* Emergency Power Systems* Structural SystemsExtensive knowledge of all levels of boiler systems and/or equipment, as indicated by the 1st grade licensingAbility to operate in a large facility environment and function as a resource for staff on various and complex boiler-related equipmentSUPPLEMENTAL REQUIREMENTSWORK ATTIREUniform YesScrubs NoBusiness professional NoOther (department approved) NoON-CALL**Note that employees may be required to be on-call during emergencies (ie. DIsaster, Severe Weather Events, etc) regardless of selection below.On Call* YesTRAVEL****Travel specifications may vary by department**May require travel within the Houston Metropolitan area YesMay require travel outside Houston Metropolitan area NoCompany Profile:Houston Methodist Willowbrook Hospital is a Magnet-recognized, not-for-profit, faith-based hospital that serves the growing Northwest Houston community. With 358 licensed beds, Houston Methodist Willowbrook is committed to providing quality, cost-effective health care in a compassionate environment for a full range of services, including emergency care, cardiology, orthopedics and sports medicine, comprehensive women’s services, neurology and neurosurgery, oncology, and primary and general medicine.Houston Methodist is an Equal Opportunity Employer.Equal employment opportunity is a sound and just concept to which Houston Methodist is firmly bound. Houston Methodist will not engage in discrimination against or harassment of any person employed or seeking employment with Houston Methodist on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law. VEVRAA Federal Contractor – priority referral Protected Veterans requested.

An Engineering Supervisor oversees and coordinates the activities of a team of engineers and designers. They are responsible for managing projects, allocating resources, providing technical guidance and support, ensuring compliance with safety and quality standards, and evaluating team performance. Additionally, they may collaborate with other departments and stakeholders to develop and implement engineering strategies and initiatives. Strong leadership, problem-solving, and communication skills are essential for success in this role. This position does not offer Visa sponsorship now or in the future. This position does not offer relocation assistance. Essential Responsibilities Manage work schedules and adapt easily to change.Creating standards while looking for efficiencies in cost, quality, and delivery.Work leader responsibilities may include task assignment, performance feedback, on-the-job training, directing lower-level engineering personnel to appropriate sources of information, products, vendors, etc. Minimum Qualifications BS Degree in Electrical Engineering or Electrical Technology.Minimum 5 years of experience in an Engineering role (design, engineer, or both).Minimum 1-5 years of experience in a leadership role Preferred Qualifications 1 year of experience in a supervisory roleEIT preferred. Skills, Abilities & Other Requirements Knowledge and/or experience in the following: Drafting/CAD skills, design and circuitry, documentation, creating and proposing drawings, reading and interpreting electrical symbols, characters, and drawings, apply ANSI, ISO requirements for a specific department and how it interfaces, industry codes and standards, power system applications, checking wiring diagrams and completed jobs, ordering materials, interpreting customer job specifications, consulting and troubleshooting on complex jobs, and provide technical assistance with sales/customer, service technicians, and shop employees.Knowledge of multiple product lines such as 5/15kV Switchgear, 38kV Switchgear, Low Voltage MCC, Medium Voltage MCC, Power Control Rooms, Panelboards, Relay Panels, etc.Knowledge of new and previous vintages of Powell equipmentFamiliarity with modifications to existing equipment in the fieldInnovative to improve existing products based on quality, delivery, and cost. Working Conditions Temperature controlled working environment. Some outside activities may be required.This position may travel out-of-town to attend training and meetings.Typical office environment: may experience minor discomfort from extensive use of a computer display and keyboard; travel between buildings on campus and between campuses. Physical Requirements Maintaining body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs.Sitting, standing and walking for long periods of time.Typing, punching or applying pressure to an object with fingers and palm. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. We are an Affirmative Action and Equal Opportunity Employer/Vet/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Entity: Production & OperationsJob Family Group: Engineering GroupJob Description: bp is looking for an Instrument and Control Engineer! The Instrument and Control Engineer will ensure pragmatic solutions are implemented for management of risk, production efficiency, plant reliability, defect elimination and engineering standardization, related to instrumented protective systems, process control systems and telecommunications systems, in support of safe, reliable, and compliant operations. This role supports Gulf of Mexico offshore facilities.Essential experience and job requirements:Minimum of 5 years industry experience (upstream oil/gas, refining and/or petrochemical experience is desired).Extensive experience with instrumentation and controls in process industry, including design, installation and calibration of pressure, temperature & flow sensing, fire and gas, level sensing and valve actuation.Must be able to read, review, redline and create P&IDs, loop diagrams, datasheets, cause and effect drawings, electrical schematics and wiring diagrams.Must have ladder logic and functional block programming experience.Experience in root cause failure assessments for instrumentation equipment.Experience in Management of Change principles and processes to successfully deliver improvements and modifications.Experience in functional safety lifecycles (e.g. HAZOP/LOPA, SIL verification, Safety Requirements Specifications).Technical knowledge of electrical equipment and systems in hazardous areas.Must be authorized to work in the USAWilling to travel to offshore assets as required (Travel requirement: 10 - 20%)Key accountabilities:Provide technical assistance to Operations to help resolve any facility problems, as related to instrumentation, controls, safety system, fire and gas, digital security, telecommunications, and measurement.Serve as asset barrier owner for P6 BPCS, P7 SIS, P8 Alarm and Operator Response and M6 Fire & Gas LOPC barriers. Actively monitor and evaluate the barrier health and support gap closure actions if needed.Ensure pragmatic solutions are implemented for management of risk, production efficiency improvement, maintenance, defect elimination, related to instrumented protective systems, process controls and alarms, and in support of safe, reliable, and compliant operations.Lead and/or provide technical input into 5-why analysis, root cause failure analyses (RCFA), analysis of inspection results, and implementation of solutions - including small projects as necessary.Lead and/or provide technical support to Management of Change process (e.g. redline, risk assessment, regulatory approval, automation workpack) from I&C perspective.Develops and updates the technical content of Equipment Strategies based on equipment specifications, performance feedback and periodic maintenance history review.Ensures that the inspection, testing, maintenance, and condition monitoring tasks in the Central Maintenance Management System (SAP) are aligned with the technical intent of Equipment Strategies.Performs reliability analysis for instrument and control equipment using surveillance, maintenance and condition monitoring data, and trends performance metrics. Identifies gaps, develops, and implements corrective plans.Provides I&C expertise to delivery of regional actions. Leads on resolution of complex, multi-discipline technical issues where the dominant component is instrumentation and control equipment.Provides I&C expertise for Management of Change in support of site projects modifications.Provides I&C expertise to hazard identification and risk assessment processes.Provides I&C expertise in performing safety incident investigations (IRIS) and production deferral investigations.Provides I&C expertise to ensure that cyber security risk controls are in place on regional automation systems and that associated barriers are proactively managed.Coordinate activities of onshore and offshore main automation and instrumentation contractors to ensure the systems are of high quality and work packs are executed in a safe manner with reasonable cost and minimal impact on productionRecords relevant learnings in shared learning systems, incorporates into local activities and escalates high priority lessons.Preferred qualificationsOffshore oil and gas deepwater experience is a plusWhy join us At bp, we support our people to learn and grow in a diverse and ambitious environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly.There are many aspects of our employees’ lives that are meaningful, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, and excellent retirement benefits, among others!Travel RequirementUp to 25% travel should be expected with this roleRelocation Assistance:Relocation may be negotiable for this roleRemote Type:This position is a hybrid of office/remote workingSkills:Agility core practices, Agility core practices, Analytical Thinking, Asset Life Cycle Management, Automation system digital security, Commercial Acumen, Commissioning, start-up and handover, Communication, Competency Management, Creativity and Innovation, Digital fluency, Earthing and grounding systems, Electrical operational safety, Factory acceptance testing, Financial Management, Fire and gas philosophy, Functional Safety, Hazard Identification, Hazard identification and protection layer definition, Instrument and protective systems, Management of change, Network Technologies, Safe and reliable operations, Safety critical equipment, Site Acceptance Testing {+ 1 more}Legal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process,pleasecontact us.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Job Type:RegularPlains All American is an industry-leading transportation and midstream provider specializing in transportation, storage, processing and marketing solutions for crude oil and natural gas liquids (NGLs). We own an extensive network of pipeline transportation, terminalling, storage and gathering assets in key crude oil and NGL producing basins and transportation corridors and at major market hubs in the United States and Canada. On average, Plains handles more than 6 million barrels per day of crude oil and NGL in its Transportation segment. The company is headquartered in Houston, Texas.We are looking for highly-motivated individuals who enjoy working as part of a team in a dynamic and entrepreneurial work environment.Plains has an immediate opening for a Senior Integrity Programs Engineer to join our North American Asset Integrity group in Houston, Texas, or Calgary, Alberta. The mission of this group is to assist Plains in achieving incident-free operations, extending asset life, and maximizing reliability. Reporting to the Manager, Integrity Programs, you will be tasked with developing, implementing, administrating, and improving tools, processes, and programs under Plains’ Pressure Equipment Integrity Management (PEIM) Program. Your primary duties will center around program development, technical support, and program assurance for our asset base of piping, vessels, bullets, and spheres.The Asset Integrity group works collaboratively across multiple organizations and assets located throughout the United States and Canada. This group also serves as an interface with regulatory agencies and industry groups including but not limited to: American Petroleum Institute (API), Alberta Boiler Safety Association (ABSA), and Technical Safety Authority of Saskatchewan (TSASK).The successful candidate will be eligible for company benefits including medical/dental/prescription/vision, 401(k) plan, paid time off (PTO), and other programs. This position will require occasional domestic and cross-border international travel (up to 10%).Responsibilities:Define and lead the development of integrity governance, with a focus on pressure equipment.Ensure compliance with industry regulations and standards including API 570, AB-512, 29 CFR 1910, CSA B51, and CSA B52.Train and work with regional Asset Integrity and Operations personnel to implement and sustain programs.Monitor industry trends, emerging standards, and regulations and adjust programs as needed.Maintain clear and concise program documentation.Lead PEIM external audits, identify gaps, and implement action plans for closure.Act as company subject matter expert (SME) for pressure equipment.Work across departments to emphasize projects that address specific pressure equipment integrity challenges.Provide pressure equipment expertise to guide decisions across the organization.Participate in industry organizations and committees as assigned. Lead delivery of information and influence committee missions and lessons learned for industry improvements.Manage and continually improve assurance activities to ensure program effectiveness.Manage annual program performance reviews with senior leadership.Identify positive and negative trends to create a compelling business case for overall process improvement.Qualifications:Bachelor’s degree in engineering; materials, chemical, or mechanical required. Advanced degree considered an asset.Registered / licensed professional engineer with 12+ years’ relevant experience in pressure equipment integrity.Working knowledge of NBBI/ASME/ABSA/TSASK/OSHA pressure equipment regulations and standards.Working knowledge of design, construction, and inspection of pressure vessels; non-destructive testing techniques, and predominant damage mechanisms.Experience with fitness-for-service assessment, risk assessment, and hazard/threat management.Able to identify, assess, and articulate trends and challenges with broader business implications.Strong problem-solving and collaboration skills.Exceptional interpersonal and written communication skills.Self-motivated and driven to continue to develop professionally.Excellent computer skills with proficiency in Microsoft Office applications.Able to travel internationally (valid US or Canadian passport).Cleared criminal history (background), education, and satisfactory reference checks.Compliance with the company’s Drug & Alcohol Policy including pre-employment testing.Valid state driver's license and driving record satisfactory to the company and its insurers. #PlainsAt Plains, our employees are our most valuable asset. Hard work is rewarded with competitive compensation and a top-tier benefits program designed to keep our employees safe, healthy and happy. We work hard to deliver the best results to our stakeholders and we also respect our employees need for personal and family time, which is reflected in our benefits program.Salary details estimated by job boards such as Indeed, Glassdoor, and LinkedIn do not represent Plains’ compensation structure. We thank all candidates for their interest; however, only those selected for an interview will be contacted.By submitting your resume, you consent to the collection, use and necessary disclosure of the personal information provided during the application and selection process. Learn more.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Job Description: Industrial Fire Apparatus Engineer/EMT - HoustonIMMEDIATELY HIRING!INDUSTRIAL FIRE APPARATUS ENGINEER-EMTsFULL-TIME Opportunities availablein Houston TX$22 per hourWe are hiringIndustrialFire Apparatus Engineers/EMTswitha passion for firefighting and patient care combined with the drive to succeed anddeliver high-quality care.Job Summary:Industrial Fire Apparatus Engineers/EMTs,underdirect supervision, trains for and participates in duties and related responsibilities of an emergency and/or hazardous nature in fire suppression and emergency operations in an industrial facility, responds to fire alarms and other emergency calls to protect life and property; drives, operates and maintains fire apparatus and equipment. Although firefighting and rescue work are the most difficult and responsible areas of activity, the major portion of time is spent drilling and studying methods, techniques, and organization, and in routine duties in the care and maintenance of customer property and equipment.This is considered a safety sensitive position and is subject to both the Company’s and the Client’s Industrial Drug and Alcohol Testing Policy, which includes: pre-employment testing, post-accident testing, random testing, reasonable suspicion testing, return to duty testing and follow-up testing.Minimum Required Qualifications:18 years old.Must be a high school graduate or possess a GED certificate.Valid Driver’s License.Must possess County, State and/or National EMT-B credentials.Must possess AHA CPR/AED credentials.Physical Agility Fitness Test (Initial Hire and Annually).State, IFSAC, or PROBOARD Firefighter 1 certification.State, IFSAC, or PROBOARD Driver Operator – Pumper (NFPA 1002)Hazardous Materials Operations (state, IFSAC, PROBOARD)Desired Qualifications:Hazardous Materials Technician (state, IFSAC, or PROBOARD)Confined Space Rescue Technician (state, IFSAC, or PROBOARD)Trench Rescue (NFPA 1006)Swiftwater Rescue (NFPA 1006)State, IFSAC, or PROBOARD Firefighter 2NFPA 1081, Industrial Fire Brigade MemberState, IFSAC, or PROBOARD Driver Operator – Mobile Water SupplyResponsibilities:Responds to fire alarms and other emergency calls by driving assigned automotive equipment or fire apparatus to the required location.Drives, operates and maintains various types of firefighting and suppression apparatus and equipment, including but not limited to pumping and ladder equipment and ground monitors.Training personnel in the operation and maintenance of fire apparatus and equipment.Quickly follows established Company procedures when responding to emergencies as well as instructions given at the emergency scene.Correctly and promptly uses all relevant apparatus, tools, and equipment.Remains calm and poised in all emergency situations and gains rapid control over the problem at hand.Administers first aid to injured parties at their appropriate level of training.Quickly analyzes situations where life safety is threatened and applies the correct treatment.Safely operates Company vehicles, and equipment as directed.Assists in the maintenance of fire and rescue apparatus, tools, and equipment keeping such apparatus, tools, and equipment in good operating and safe condition by competently and efficiently performing maintenance and testing tasks.Keeps the company base and related grounds, facilities, and supplies in a clean, orderly and useable condition.Performs routine non-firefighting work tasks,such as working on Company records, time cards and other related paperwork.Functions satisfactorily as a team member of a fire company at any emergency or non-emergency scene, and willingly accepts their share of the work required.Able to meet the physical requirements required to perform firefighting tasks.Remains skilled in and properly applies modern fire suppression tactics, methods, and procedures at training drills and emergency Incidents.Projects a positive attitude and image to the client as a fire service professional to meet the client’s needs.Works effectively in following policies and procedures.Why Choose Rural Metro As a national leader in private fire protection services,Rural Metro Fireis one ofGlobal Medical Response’s(GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employeesprovidecare to the world atwww.AtaMomentsNotice.com. Learn howourvaluesare at the core of our services and vital to how we approach care and check out our comprehensive benefit options atGlobalMedicalResponse.com/Careers.*Get paid to work with your friends! GMR is looking for people like you!GMR Employees, if you know someone like you, have them add your name to their application and receive a Referral Cash Bonus!#WeAreGMR#referralbonus#hiring#mechanic#fleet#fleetmaintenance#ruralmetro EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits pageto learn more about our benefit options, which include medical, vision, dental, 401k, disability, FSA, HAS, EAP, vacation and paid time off.

At Houston Methodist, the Radiation Physicist is responsible for performing measurements and providing data for quality assurance of radiation sources and treatment plans, under the supervision of a fully licensed therapeutic medical physicist, to ensure that patients receive the physician prescribed radiation dose for accurate treament of disease as well as protecting patients, staff and public from radiation harm. The incumbent will monitor the performance of radiation producing devices as well as ensure that patient-specific quality assurance, including initial and periodic treatment plan checks, and measurements are performed appropriately and in a timely manner. PEOPLE ESSENTIAL FUNCTIONSWorks with therapy staff to ensure that periodic machine quality assurance is routinely and appropriately performed.Works with engineering/vendor staff to ensure machine repairs and upgrades are adequately performed and machine performance verified.Provides consultation to physicians and guidance to dosimetrists and therapists regarding best approaches to simulate, plan, image and treat patients to assure accurate delivery of prescribed radiation dosage to a specific human patient, and the associated risks.Participates in training of departmental personnel as needed to effectively and safely utilize equipment for patient care and in the didactic education and hands-on training for radiation oncology and medical physics residents and other trainees.SERVICE ESSENTIAL FUNCTIONSParticipates in the development of procedures for testing and evaluating performance levels of radiotherapy treatment and simulation equipment. This includes assisting in the development and execution of plans for acceptance and commissioning of new radiotherapy and dosimetry equipment and software.Provides documentation that radiotherapy treatment, simulation and measurement equipment meet accreditation and regulatory compliance requirements.Participates in the development and management of the quality control program for a radiation treatment facility that includes applicable facility accreditation and regulatory requirements, and the review of policies and procedures pertaining to therapeutic radiation and its safe and appropriate use.QUALITY/SAFETY ESSENTIAL FUNCTIONSPerforms quality assurance to verify proper functioning after installation, repair or upgrade of radiation treatment equipment and software. It includes acceptance testing of radiotherapy treatment and simulation equipment, calibration and characterization of radiation beams from therapeutic equipment including radiation quantity, quality, and distribution characteristics, and assessment of the mechanical and geometric optics for proper placement of the beam. It also includes calibration and/or verification of the physical and radiological characteristics of brachytherapy sources.Supports the implementation and management of dosimetric and beam delivery aspects of external beam delivery, brachytherapy irradiation and special procedures. External beam delivery aspects include treatment aids, beam modifiers, and geometrical arrangements. Special procedures are included for both external beam (e.g. radiosurgery, total body irradiation, total skin irradiation, intraoperative therapy) and brachytherapy (e.g. high dose rate, intravascular brachytherapy).Participates in acceptance testing, management, and supervision of computer systems used for treatment planning and calculation of treatment times or monitor units. This includes measurement and input of dosimetry data base and verification of output for external beam radiotherapy and brachytherapy.Ensures that patient-specific quality assurance, including initial and periodic treatment plan checks, and measurements if required, are performed on a timely manner.Participates in the development and/or evaluation of a radiation safety program in a therapeutic radiation facility including written procedures for the protection of patients, workers, and the public, as well as in the protective shielding design and radiation safety surveys in a radiotherapy facility.FINANCE ESSENTIAL FUNCTIONSSupports the development of specifications for radiotherapy treatment and simulation equipment, including software. Provides equipment and software evaluations of value and performance on possible equipment and software purchases.GROWTH/INNOVATION ESSENTIAL FUNCTIONSThis position is eventually expected to grow into a senior physicist position (Radiation Physicist II) and manage all aspects of the clinical medical physics program.Participates in clinical research and development projects as well as other research projects that are consistent with departmental goals.This job description is not intended to be all-inclusive; the employee will also perform other reasonably related business/job duties as assigned. Houston Methodist reserves the right to revise job duties and responsibilities as the need arises. EDUCATIONM.S. degree in physical science required.WORK EXPERIENCEMinimum of two years of experience in therapeutic medical physics in a hospital/clinic based environment, including educational training. LICENSES AND CERTIFICATIONS - REQUIREDMPHYS - Medical Physicists - State Licensure -- in Therapeutic Medical Physics ORMPHYS-Temp - Temporary Medical Physicists - State Licensure ANDABR-TMP - Therapeutic Medical Physics (ABR) -- or eligible for certification KNOWLEDGE, SKILLS, AND ABILITIESDemonstrates the skills and competencies necessary to safely perform the assigned job, determined through on-going skills, competency assessments, and performance evaluationsSufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or securityAbility to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principlesSUPPLEMENTAL REQUIREMENTSWORK ATTIREUniform NoScrubs YesBusiness professional YesOther (department approved) NoON-CALL**Note that employees may be required to be on-call during emergencies (ie. DIsaster, Severe Weather Events, etc) regardless of selection below.On Call* YesTRAVEL****Travel specifications may vary by department**May require travel within the Houston Metropolitan area YesMay require travel outside Houston Metropolitan area NoCompany Profile:Houston Methodist Specialty Physician Group is an integral part of Houston Methodist’s overall strategy to become one of the nation’s leading academic medical centers. Established as a nonprofit corporation certified by the Texas State Board of Medical Examiners, the Specialty Physician Group enables physicians to maintain autonomy with respect to clinical practice while growing their practice within an academic environment.Houston Methodist is an Equal Opportunity Employer.Equal employment opportunity is a sound and just concept to which Houston Methodist is firmly bound. Houston Methodist will not engage in discrimination against or harassment of any person employed or seeking employment with Houston Methodist on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law. VEVRAA Federal Contractor – priority referral Protected Veterans requested.

Role Overview: Sodexo Energy and Resourceis seeking aFacilities / Engineering Operations Manager II, for anOil & Gas client in Houston, TX. The ideal candidate will maximize the value of the client’s assets, and achieve the operational and financial goals and objectives by developing, implementing, and executing an overall Strategic Plan for each property and the portfolio. Our clients depend onyourexpertise to help them to optimize their business. If you are aStrategic Facilities Managerwho can develop innovative technical solutions while successfully managing key performance indicators to drive strong business results, this may be the opportunity for you! What You'll Do: Lead and coordinate maintenance services, ensuring adherence to contract obligations, quality standards, and client expectations, while managing financial goals, cost control, and performance metrics.Foster strong customer relationships and collaboration with facility team leaders to align operational and strategic goals, driving continuous improvement and a proactive service culture.Oversee the recruitment, training, and development of skilled personnel, ensuring compliance with policies, procedures, health, safety, and legislative requirements.Manage sub-contractors, monitor performance, and ensure SLAs, KPIs, and contractual agreements are met, while providing leadership, coaching, and guidance to ensure operational excellence.Maintain clear and effective communication with clients, oversee reporting standards, and ensure profitable and cost-effective asset management while identifying and implementing process improvements. What We Offer: Compensation is fair and equitable, partially determined by a candidate's education level or years of relevant experience. Salary offers are based on a candidate's specific criteria, like experience, skills, education, and training. Sodexo offers a comprehensive benefits package that may include:Medical, Dental, Vision Care and Wellness Programs401(k) Plan with Matching ContributionsPaid Time Off and Company HolidaysCareer Growth Opportunities and Tuition ReimbursementMore extensive information is provided to new employees upon hire. What You Bring: a proven track record of successful Facilities Management leadership experience as demonstrated by articulated results and accomplishments;Strong technical knowledge of the following: mechanical, electrical, plumbing, HVAC, structural, safety systems, architectural, landscape, and energy management;demonstrated business and financial acumen with a strong P&L understanding; payroll oversight and budgetary oversight on some services;exceptional customer service, relationship building, and communication skills;Strong leadership skills with a focus on staff development and team building;Certified Facilities Manager (CFM) is a plusA bachelor’s degree in engineering or related fields is preferred. Who We Are: At Sodexo, our purpose is to create a better everyday for everyone and build a better life for all. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate. Sodexo partners with clients to provide a truly memorable experience for both customers and employees alike. We do this by providing food service, catering, facilities management, and other integrated solutions worldwide.Our company values you for you; you will be treated fairly and with respect, and you can be yourself. You will have your ideas count and your opinions heard because we can be a stronger team when you’re happy at work. This is why we embrace diversity and inclusion as core values, fostering an environment where all employees are valued and respected. We are committed to providing equal employment opportunities to individuals regardless of race, color, religion, national origin, age, sex, gender identity, pregnancy, disability, sexual orientation, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you need assistance with the application process, please complete this form. Qualifications & Requirements: Minimum Education Requirement - Bachelor’s Degree or equivalent experienceMinimum Management Experience - 5 yearsMinimum Functional Experience - 3 years work experience in facilities maintenance, plant operations or engineering services

Our client, a leader in engineering solutions, is seeking a Technical Sales Engineer (Process Analyzers) to join their team. As a Technical Sales Engineer, you will play a key role in driving Analytical Service & Maintenance opportunities in the Texas and Gulf Coast regions. The ideal candidate will demonstrate strong expertise, business development acumen, and excellent relationship management skills, which will align successfully within the organization.Job Title: Technical Sales Engineer - Process AnalyzersLocation: Houston, TXBase Salary: $170k-$180k/yearWhat’s the Job Develop and implement an Analytical Service Business Development Plan for the Gulf Coast.Identify and close Analytical Service & Maintenance opportunities, including systems relocation, installation, startup, and sample system design-build.Oversee Analytical Maintenance services, including monthly-quarterly PM, CGA, support contracts, supplemental maintenance, and emergency call-out support.Participate in field walks to define and validate scope for proposal development.Work with a variety of analyzer systems, including Emerson, Siemens, ABB, Yokogawa, ThermoElectric, SICK, and Teledyne analyzers, as well as associated sampling systems, bundles, heaters, and probes. What’s Needed 10-20 years of experience in Process and Environmental Analytical Service and Maintenance.Proficiency with Process Analyzer and CEMS applications, including maintenance and service support.Hands-on experience with leading analyzer brands such as Emerson, Siemens, ABB, Yokogawa, ThermoElectric, SICK, and Teledyne.Strong understanding of sample systems, bundles, heaters, and probes.Experience developing and executing business development strategies. What's in it for me Medical, Dental, Vision, 401k with MatchWeekly pay with direct depositHoliday PayReferral RewardsMonthly Recognition ProgramsDedicated Career Partner to help you achieve your career goalsRecognized as World’s Most Ethical Companies in 2023 for the 14th year in a row If this is a role that interests you and you’d like to learn more, click apply now, and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you!About ManpowerGroup, Parent Company of:Manpower, Experis, Talent Solutions, and Jefferson WellsManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands –Manpower, Experis, Talent Solutions, and Jefferson Wells– creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent

Living Our ValuesAll associates are guided by Our Values. Our Values are the unifying foundation of our companies. We strive to ensure that every decision we make and every action we take demonstrates Our Values. We believe that putting Our Values into practice creates lasting benefits for all of our associates, shareholders, and the communities in which we live.Why Join UsCareer Growth: Advance your career with opportunities for leadership and personal development.Culture of Excellence: Be part of a supportive team that values your input and encourages innovation.Competitive Benefits: Enjoy a comprehensive benefits package that looks after both your professional and personal needs.Total RewardsOur Total Rewards package underscores our commitment to recognizing your contributions. We offer a competitive and fair compensation structure that includes base pay and performance-based rewards. Compensation is based on skill set, experience, qualifications, and job-related requirements. Our comprehensive benefits package includes medical, dental, and vision insurance, wellness programs, retirement plans, and generous paid leave. Discover more about what we offer by visiting our Benefits page.A Day In The LifeThe Principal Data Engineer within the Data Science and Analytics team, plays a crucial role in architecting, implementing, and managing robust, scalable data platforms. This position demands a blend of cloud data engineering, systems engineering, data integration, and machine learning systems knowledge to enhance GST's data capabilities, supporting advanced analytics, machine learning projects, and real-time data processing needs. You will guide other team members and collaborate closely with cross-functional teams to design and implement modern data solutions that enable data-driven decision-making across the organization.As a Principal Data Engineer you will:Collaborate with Business, and IT functional experts to gather requirements or issues, perform gap analysis and recommend/implement process and/or technology improvements to optimize data solutions.Design data solutions on Databricks including Delta Lake, Data Warehouse, Data Mart and others to support the data science and analytical needs of the organization.Design and implement scalable and reliable data pipelines to ingest, process, and store diverse data at scale, using technologies such as Databricks, Apache Spark, Kafka, Flink, AWS Glue or other AWS services.Work within cloud environments like AWS to leverage services including but not limited to EC2, RDS, S3, Athena, Glue, Lambda, EMR, Kinesis, and SQS for efficient data handling and processing.Develop and optimize data models and storage solutions (SQL, NoSQL, Key-Value DBs, Data Lakes) to support operational and analytical applications, ensuring data quality and accessibility.Utilize ETL tools and frameworks (e.g., Apache Airflow, Talend) to automate data workflows, ensuring efficient data integration and timely availability of data for analytics.Implement pipelines with a high degree of automation for data workflows and deployment pipelines using tools like Apache Airflow, Terraform, and CI/CD frameworks.Collaborate closely with business analysts, data scientists, machine learning engineers, and optimization engineers, providing the data infrastructure and tools needed for complex analytical models, leveraging Python, scala or R for data processing scripts.Ensure compliance with data governance, compliance and security policies, implementing best practices in data encryption, masking, and access controls within a cloud environment.Establish best practices for code documentation, testing, and version control, ensuring consistent and reproductive data engineering practices across the team.Monitor and troubleshoot data pipelines and databases for performance issues, applying tuning techniques to optimize data access and throughput.Ensure efficient usage of AWS and Databricks resources to minimize costs while maintaining high performance and scalability.Cross functional work understanding data landscape, developing proof of concepts, and demonstrating to stakeholders.Leads one or more data projects and support with internal and external resources. Coach and mentor junior data engineers.Stay abreast of emerging technologies and methodologies in data engineering, advocating for and implementing improvements to the data ecosystem.What We Need From YouBachelor's Degree Computer Science, Data Science, MIS, Engineering, Mathematics, Statistics or other quantitative discipline with 5-8 years of hands-on experience in data engineering, with a proven track record in designing and operating large-scale data pipelines and architectures ReqProven experience designing scalable, fault-tolerant data architecture and pipelines on Databricks delta lake, lakehouse, unity catalog, streaming, AWS, ETL/ELT development and data modeling, with a focus on performance optimization and maintainability RequiredDeep experience of platforms and services like Databricks, and AWS native data offerings RequiredSolid experience with big data technologies (Databricks, Apache Spark, Kafka) and AWS cloud services related to data processing and storage RequiredStrong hands-on experience with ETL/ELT pipeline development using AWS tools and Databricks Workflows RequiredStrong experience in AWS cloud services, with hands-on experience in integrating cloud storage and compute services with Databricks RequiredProficient in SQL and programming languages relevant to data engineering (Python, Java, Scala RequiredHands on RDBMS and data warehousing experience (data modeling, analysis, programming, stored procedures) RequiredGood understanding of system architecture and design patterns to design and develop applications using these principles RequiredProficiency with version control systems like Git and experience with CI/CD pipelines for automating data engineering deployments RequiredFamiliarity with machine learning model deployment and management practices is a plus PreferredExperience with SAP, BW, HANA, Tableau, or Power BI is a plus PreferredExperience with auto, manufacturing, or supply chain industries is a plus PreferredProject life-cycle leadership and support for requirement workshop, design, development, test cycles and production cutover, post-go live support, and environment strategy. Strong knowledge of agile methodologies RequiredStrong communication skills, capable of collaborating effectively across technical and non-technical teams in a fast-paced environment. RequiredAWS Certified Solution Architect PreferredDatabricks Certified Associate Developer for Apache Spark Preferredor other relevant certifications. PreferredPhysical and Environmental RequirementsThe physical requirements described here are representative of those that must be met by an associate to successfully perform the essential functions of the job. While performing the duties of the job, the associate is required on a daily basis to analyze and interpret data, communicate, and remain in a stationary position for a significant amount of the work day and frequently access, input, and retrieve information from the computer and other office productivity devices. The associate is regularly required to move about the office and around the corporate campus. The associate must frequently move up to 10 pounds and occasionally move up to 25 pounds.Travel Requirements20% The associate is occasionally required to travel to other sites, including out-of-state, where applicable, for business.Join UsThe Friedkin Group and its affiliates are committed to ensuring equal employment opportunities, including providing reasonable accommodations to individuals with disabilities. If you have a disability and would like to request an accommodation, please contact us at . We celebrate diversity and are committed to creating an inclusive environment for all associates.We are seeking candidates legally authorized to work in the United States, without Sponsorship.HP125#LI-BM1

Powell Industries, a US manufacturer of low- and medium-voltage electrical equipment for commercial, industrial, and utility systems is seeking highly motivated candidates for a Senior R&D Engineer II as part of an expansion of New Product Development in our Research and Development Department. In this role, you will work with a team of experienced professionals to develop groundbreaking new technologies and product designs, taking initial concepts through to production launch. Powell’s products include class-leading vacuum circuit breakers, monitoring, sensing and control electronics, communications and software systems, switchgear, motor control, and safety-focused enclosure systems.Powell’s 75-year leadership in vacuum switching technology and arc-flash safety is widely known and in use globally, while being designed and manufactured in multiple facilities in the US, Canada and the UK. One of our three Houston-area manufacturing facilities also includes a world-class prototyping shop and UL-certified high voltage and high current lab, where you will be able to model and validate the performance of your designs in real time. Posted position does not allow for sponsorship or relocation support. Expectations Propose concepts and develop complex level designs for both existing and new product lines.Deliver innovative designs that meet profit, cost, quality, and time-to-market metrics.Determine and specify design parameters, validate according to standards, and prepare documentation.Investigate patentable concepts.Oversee validation and testing of components/system or assemblies in the development and validation process.Develop test plans based on D/PFMEA, project specifications, industry standards, and reliability and validation requirements for both internal and external laboratories.Direct laboratory testing, analysis of data, and create corrective action plans.Ensure project designs meet requirements of specification and standards while promoting error-proof assembly.Prepare written documentation of processes, material requirements, test results, and project activity as required.Understand and enforce regulatory document requirements.Interface with outside vendors, consultants, and customers.Work with third-party vendors to develop high-quality, lowest-cost design options.Continuously improve engineering processes including DFX, project and product costs, quality, and project lead times.Actively collaborate and provide Engineering support to Sales/Product Management and Manufacturing on new products and processes.Actively participate in and facilitate Product Development Process.May perform other duties as assigned. Job Requirements Bachelor’s Degree in Electrical, Mechanical Engineering or Power Engineering. Advanced degree preferred.8+ years of progressive experience in Engineering design and/or development on highly technical and innovative projects.Able to prioritize and manage time effectively. (Self-motivated and self-managing). Working knowledge of electromechanical product design and development.Working knowledge of switchgear and/or controls.Experience with medium/high voltage electrical power systemsDemonstrated complex analytical and problem solving ability.Working knowledge of CAD and/or analysis tools.Working knowledge of regulatory standards (ANSI, IEEE, and IEC).Experience creating and reviewing DFMEA and PFMEA process and documents. Experience developing projects within a Stage-Gate Process.Participation in industry organizations (associations, standards committees, etc.) to stay informed of and to influence industry activities a plus.Proven experience with computers; Microsoft Office, Microsoft Project, or equivalentsStrong technical knowledge in the following categories per discipline:Electrical: Current and Voltage Sensors, Power Systems.Mechanical: Molded Components or Mechanism Design, castings, and metal fabricated parts Demonstrated ability to write/edit technical documents; test reports, engineering standards, industry technical papers.Demonstrated verbal and written communication skills.Ability to quickly respond to strategic and tactical changes. Working Environment The employee typically performs duties in a normal office environment. There will be some work in our manufacturing shop facilities, as well as in our electrical test lab. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. We are an Affirmative Action and Equal Opportunity Employer/Vet/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Entity: Supply, Trading & ShippingJob Family Group: Engineering GroupJob Description: About Archaeabp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we’re still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition.Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline.About the roleThe Senior Director of Controls Engineer will lead and oversee the development, implementation, and ongoing optimization of instrumentation and control systems for RNG facilities.This role will set the strategic direction for control systems engineering, ensuring high quality execution, and driving innovation across the Archaea Modular Design as well as legacy RNG facilities.This role requires strong technical expertise in control systems, leadership capabilities to manage engineering team along with multiple Control System Integrators, understanding of project execution and the ability to drive process improvements within a fast-paced environment. This role provides engineering services in all project and operation phases,which include design for greenfield/brownfield development, C&E development, construction management of installing controls hardware, commissioning, ongoing process control changes for operating plants, obsolescence upgrades, and improvement projects such as alarm management, real time data, digital security, etc.Travel requirement of 10-15%.Key accountabilitiesStrategic LeadershipProvides leadership, mentoring and management of controls engineers and control system integratorsMaintains technical ownership of the standard control system design (hardware and software) for the Archaea Modular Design that is able to evolve and improve over timeDefine and implement the strategic vision for the controls engineering department aligned with company goalsCollaborate with senior leadership to prioritize engineering initiatives and allocate resources effectivelyProject ExecutionOversee the design, development, and execution of the standard control system design across new greenfield RNG projects.Oversee development of engineering deliverables such as I/O Lists/Index, Cause and Effects, Control Narratives, Sequence Tables, Network Architecture, Datasheets, etc.Coordinate with 3rd Party Engineering companies for engineering deliverables that are not internally generatedCoordinate/manage relations between mechanical and electrical installers.Acting as a liaison between Project Managers and the Control System Integrator for controls hardware installation, configuration and commissioning.Oversees server configuration, PLC programming, HMI development, historian, remote access and callout systemsOversees commissioning activities including loop checks and measurement/analyzer configuration and/or calibrations.Operations SupportProvides operational control system support to legacy and Archaea Modular Design RNG facility control systemsGathers, prioritizes and executes process control changes across the AMD standard sites as well as legacy control systems.Oversees support of instrumentation and measurement systems to ensure compliance, commercial and regulatory requirements metOversees control system integrator or internal Archaea resources for implementation of process control programming changesOversees version control of changes and backups of equipment configurationsMaintains engineering documents such as C&Es, control narratives, etcEnsures obsolescence is monitored, tracked and prioritized to keep control systems operationalActs as Process Control Network Digital Security SPAQualificationsUnyielding dedication to safety and able to positively represent a company safety culture.Customer focused for both internal and external customers. The major customer of the electrical & controls technician is the projects and operations group of Archaea Energy. Customer focus must be on support of project execution and plant operations staff.Motivated and driven for Quality and Results.Ethics, Integrity, and Character with regard to safety, fiscal responsibility, and customer support.Technical ability and troubleshooting skills are a must. The candidate must be able to provide on-site, phone and email support for all levels of co-workers with all ranges of experience levels.Ability to work independently in a multi-skilled team environment.Able to work under pressure with minimal frustration.Strong organizational skills.Able to set priorities and reprioritize as needed.Make improvements, accept, and look for change. Always work on new projects by first looking back on past projects with a mindset of continuous improvement and adoption of best practices.Communicate accurately and frequently with supervisors, managers, and plant operations personnel.Job Specific CompetenciesKnowledge of DCS and/or SCADA systems, PLCs, historians, and control system network equipmentKnowledge of instrumentation, measurement and analyzersKnowledge of process safety and safety instrumented systemsKnowledge of process control and gas processingSafety (displays strong commitment to safety and completes safety training)Productivity (completes work in a timely manner)Quality (gets the job done correctly)Initiative (completes work with minimum supervision and seeks new and better methods to do the job)Dependability (shows up to work and responds promptly to all call outs)Attendance (employee’s record for being at work regularly and on time)Communication (effectively communicates with team members and management)Teamwork (works effectively with team, management, and customers)Customer focus (consistently focuses on the customer)Ethics, Integrity, and Character (treats people honestly and with respect)Essential educationBachelor’s Degree in Electrical or Chemical Engineering, Electrical Engineering Technology, or related field; or equivalent combination of education and experienceEssential experience10+ years experience managing teams supporting control systems for projects or operations of oil/gas, refining, RNG, chemical plants, etc.Knowledge of gas processing, process control, and control loop tuningExperience with DCS and/SCADA systemsExperience with Allen Bradley PLCs and I/O hardware and AVEVA System Platform HMI preferredExperience with control system networks and communicationsKnowledge of digital security for process control networksExperience with historians and PIExperience with Alarm Management and Safety Instrumented SystemsTo perform this job successfully, an individual should have highest degree of proficiency in Microsoft Word; Microsoft Excel; Microsoft OutlookStrong verbal and written communication skills (including analysis, interpretation, & reasoning).Ability to develop and maintain collaborative relationships with peers and colleagues across the organization, as well asinternal and external clients.Ability to work well autonomously and within a team in a deadline-oriented environment.Ability to work with and influence peers and management.Self-motivated with critical attention to detail, deadlines and reporting.Must possess a valid driver's license.Why join us Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today’s energy system and build out tomorrow’s, apply today!How much do we pay $121,100-$224,900. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting.This position offers paid vacation depending on your years of relevant industry experience and will range from 120 – 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays.You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks’ paid leave for the birth or adoption of a child. Learn more at benefits@bp.Join our industry-leading team and you’ll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to:Discretionary Annual Bonus ProgramQuarterly Momentum BonusLong-Term Incentive Plan401K ProgramHealth, Vision, And Dental InsuranceLife InsuranceShort-Term DisabilityLong-Term DisabilityBut above all You’ll play a key part in helping bp deliver our ambition – to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today!Travel RequirementUp to 10% travel should be expected with this roleRelocation Assistance:This role is not eligible for relocationRemote Type:This position is a hybrid of office/remote workingSkills:Agility core practices, Agility core practices, Analytical Thinking, Asset Life Cycle Management, Automation system digital security, Commercial Acumen, Commissioning, start-up and handover, Communication, Competency Management, Creativity and Innovation, Digital fluency, Earthing and grounding systems, Electrical operational safety, Factory acceptance testing, Financial Management, Fire and gas philosophy, Functional Safety, Hazard Identification, Hazard identification and protection layer definition, Instrument and protective systems, Management of change, Network Technologies, Safe and reliable operations, Safety critical equipment, Site Acceptance Testing {+ 1 more}Legal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process,pleasecontact us.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

At Houston Methodist, the Radiation Physicist is responsible for performing measurements and providing data for quality assurance of radiation sources and treatment plans, under the supervision of a fully licensed therapeutic medical physicist, to ensure that patients receive the physician prescribed radiation dose for accurate treament of disease as well as protecting patients, staff and public from radiation harm. The incumbent will monitor the performance of radiation producing devices as well as ensure that patient-specific quality assurance, including initial and periodic treatment plan checks, and measurements are performed appropriately and in a timely manner. PEOPLE ESSENTIAL FUNCTIONSWorks with therapy staff to ensure that periodic machine quality assurance is routinely and appropriately performed.Works with engineering/vendor staff to ensure machine repairs and upgrades are adequately performed and machine performance verified.Provides consultation to physicians and guidance to dosimetrists and therapists regarding best approaches to simulate, plan, image and treat patients to assure accurate delivery of prescribed radiation dosage to a specific human patient, and the associated risks.Participates in training of departmental personnel as needed to effectively and safely utilize equipment for patient care and in the didactic education and hands-on training for radiation oncology and medical physics residents and other trainees.SERVICE ESSENTIAL FUNCTIONSParticipates in the development of procedures for testing and evaluating performance levels of radiotherapy treatment and simulation equipment. This includes assisting in the development and execution of plans for acceptance and commissioning of new radiotherapy and dosimetry equipment and software.Provides documentation that radiotherapy treatment, simulation and measurement equipment meet accreditation and regulatory compliance requirements.Participates in the development and management of the quality control program for a radiation treatment facility that includes applicable facility accreditation and regulatory requirements, and the review of policies and procedures pertaining to therapeutic radiation and its safe and appropriate use.QUALITY/SAFETY ESSENTIAL FUNCTIONSPerforms quality assurance to verify proper functioning after installation, repair or upgrade of radiation treatment equipment and software. It includes acceptance testing of radiotherapy treatment and simulation equipment, calibration and characterization of radiation beams from therapeutic equipment including radiation quantity, quality, and distribution characteristics, and assessment of the mechanical and geometric optics for proper placement of the beam. It also includes calibration and/or verification of the physical and radiological characteristics of brachytherapy sources.Supports the implementation and management of dosimetric and beam delivery aspects of external beam delivery, brachytherapy irradiation and special procedures. External beam delivery aspects include treatment aids, beam modifiers, and geometrical arrangements. Special procedures are included for both external beam (e.g. radiosurgery, total body irradiation, total skin irradiation, intraoperative therapy) and brachytherapy (e.g. high dose rate, intravascular brachytherapy).Participates in acceptance testing, management, and supervision of computer systems used for treatment planning and calculation of treatment times or monitor units. This includes measurement and input of dosimetry data base and verification of output for external beam radiotherapy and brachytherapy.Ensures that patient-specific quality assurance, including initial and periodic treatment plan checks, and measurements if required, are performed on a timely manner.Participates in the development and/or evaluation of a radiation safety program in a therapeutic radiation facility including written procedures for the protection of patients, workers, and the public, as well as in the protective shielding design and radiation safety surveys in a radiotherapy facility.FINANCE ESSENTIAL FUNCTIONSSupports the development of specifications for radiotherapy treatment and simulation equipment, including software. Provides equipment and software evaluations of value and performance on possible equipment and software purchases.GROWTH/INNOVATION ESSENTIAL FUNCTIONSThis position is eventually expected to grow into a senior physicist position (Radiation Physicist II) and manage all aspects of the clinical medical physics program.Participates in clinical research and development projects as well as other research projects that are consistent with departmental goals.This job description is not intended to be all-inclusive; the employee will also perform other reasonably related business/job duties as assigned. Houston Methodist reserves the right to revise job duties and responsibilities as the need arises. EDUCATIONM.S. degree in physical science required.WORK EXPERIENCEMinimum of two years of experience in therapeutic medical physics in a hospital/clinic based environment, including educational training. LICENSES AND CERTIFICATIONS - REQUIREDMPHYS - Medical Physicists - State Licensure -- in Therapeutic Medical Physics ORMPHYS-Temp - Temporary Medical Physicists - State Licensure ANDABR-TMP - Therapeutic Medical Physics (ABR) -- or eligible for certification KNOWLEDGE, SKILLS, AND ABILITIESDemonstrates the skills and competencies necessary to safely perform the assigned job, determined through on-going skills, competency assessments, and performance evaluationsSufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or securityAbility to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principlesSUPPLEMENTAL REQUIREMENTSWORK ATTIREUniform NoScrubs YesBusiness professional YesOther (department approved) NoON-CALL**Note that employees may be required to be on-call during emergencies (ie. DIsaster, Severe Weather Events, etc) regardless of selection below.On Call* YesTRAVEL****Travel specifications may vary by department**May require travel within the Houston Metropolitan area YesMay require travel outside Houston Metropolitan area NoCompany Profile:Houston Methodist Specialty Physician Group is an integral part of Houston Methodist’s overall strategy to become one of the nation’s leading academic medical centers. Established as a nonprofit corporation certified by the Texas State Board of Medical Examiners, the Specialty Physician Group enables physicians to maintain autonomy with respect to clinical practice while growing their practice within an academic environment.Houston Methodist is an Equal Opportunity Employer.Equal employment opportunity is a sound and just concept to which Houston Methodist is firmly bound. Houston Methodist will not engage in discrimination against or harassment of any person employed or seeking employment with Houston Methodist on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or other characteristics protected by law. VEVRAA Federal Contractor – priority referral Protected Veterans requested.

Role Overview: Sodexo is seeking aSenior MEP Engineer to serve as the primary in-house engineering consultant for a large portfolio of work for an energy client in downtown Houston, TX. This position will support ongoing commissioning and commissioning planning for construction projects and will be the lead in-house consultant for various infrastructure projects in large commercial properties. The Senior Electrical Engineer will provide technical expertise in electrical engineering for construction and renovation projects and existing electrical systems. Ideally, the right candidate will also have experience with conveyance systems, elevators, and escalators and experience with building and lighting controls. The role involves offering technical support to the design and construction team, and our client's in-house technical and planning teams, and will collaborate with facilities management teams. What You'll Do: Key Responsibilities:20% - Provide technical guidance for power distribution (normal and emergency), fault studies, overcurrent coordination studies, arc flash studies, lighting, life safety, fire alarm and telecommunications systems. Collaborate with architects, engineers, and other stakeholders to integrate electrical systems into new construction and renovation projects. Develop and review electrical design standards, ensuring compliance with healthcare regulations, building codes, and industry best practices.20% - Manage electrical engineering projects from inception through completion, including budgeting, scheduling, and resource allocation. Conduct site assessments, feasibility studies, and technical evaluations to determine project scope and requirements. Coordinate with contractors, vendors, and consultants to ensure timely and cost-effective project delivery.20% - Perform regular assessments of existing electrical systems to ensure optimal performance, reliability, and safety. Identify and implement upgrades, repairs, or replacements of electrical components and systems as needed. Provide technical support and troubleshooting for electrical issues within healthcare facilities.20% - Ensure all electrical systems and projects adhere to relevant healthcare standards, including NFPA, NEC, and OSHA regulations. Conduct risk assessments and implement safety measures to protect patients, staff, and visitors from electrical hazards. Stay current with industry trends, emerging technologies, and regulatory changes affecting healthcare facility electrical systems.20% - Work closely with the facilities management team to develop and execute long-term maintenance and capital improvement plans. Provide technical guidance and mentorship to other team members. Prepare and present detailed reports, proposals, and project documentation to stakeholders. What We Offer: Compensation is fair and equitable, partially determined by a candidate's education level or years of relevant experience. Salary offers are based on a candidate's specific criteria, like experience, skills, education, and training. Sodexo offers a comprehensive benefits package that may include:Medical, Dental, Vision Care and Wellness Programs401(k) Plan with Matching ContributionsPaid Time Off and Company HolidaysCareer Growth Opportunities and Tuition ReimbursementMore extensive information is provided to new employees upon hire. What You Bring: Bachelor’s degree in Electrical Engineering; Professional Engineer (PE) license is helpful but not required for this position.Minimum of 3 years of experience in electrical engineering, focusing on controls and systems in large Class A commercial properties.Strong knowledge of electrical design standards, healthcare regulations, and building codes.Strong knowledge of building controls, systems, and conveyance systemsProficiencyin typical construction management applications. Who We Are: At Sodexo, our purpose is to create a better everyday for everyone and build a better life for all. We believe in improving the quality of life for those we serve and contributing to the economic, social, and environmental progress in the communities where we operate. Sodexo partners with clients to provide a truly memorable experience for both customers and employees alike. We do this by providing food service, catering, facilities management, and other integrated solutions worldwide.Our company values you for you; you will be treated fairly and with respect, and you can be yourself. You will have your ideas count and your opinions heard because we can be a stronger team when you’re happy at work. This is why we embrace diversity and inclusion as core values, fostering an environment where all employees are valued and respected. We are committed to providing equal employment opportunities to individuals regardless of race, color, religion, national origin, age, sex, gender identity, pregnancy, disability, sexual orientation, military status, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you need assistance with the application process, please complete this form. Qualifications & Requirements: Minimum Education Requirement: Bachelor’s degree or equivalent experienceMinimum Functional Experience: 3 years

Essential Responsibilities Core Responsibilities: Independently review customer supplied specifications to assess feasibility of Powell manufacture or supply.Read and interpret electrical drawings to include single-lines, three-lines, elevations, control schematics, site plans and electrical enclosure layouts.Translate conceptual customer designs into a meaningful proposal.Generate accurate proposals based on the review and interpretation of customer-supplied documentationWrite effective comments to help define Powell’s offeringOptimize the proposed solution to best benefit Powell and our customerPerform competitive evaluation of sub vendor proposals used to complete the overall Powell offeringAssess risk associated with sub-vendor offeringInteract with other Powell divisions to develop cross business solutions.Requires regular supervision.Work may be checked by more senior team members.Project responsibilities will be simple to average. Secondary Responsibilities (performed but not regularly): Participate in sales and marketing activities to include client meetings and conferences.Participate in executing cost out initiatives in conjunction with Engineering and Operations. Key Functions: Prepare detailed, accurate and cost competitive proposals - 95%Participate in external customer facing activities – 5% Minimum Qualifications B.S. in Electrical Engineering or relevant discipline 0-2+ years of experience in electrical distribution equipment estimating, or related field Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor’s degree in an engineering discipline and 0-3 years of relevant job related experienceThe Senior Engineer level requires a Bachelor’s degree in an engineering discipline and 4-8 years of relevant job related experienceThe Lead Engineer level requires Bachelor’s degree in an engineering discipline and 7-10 years of relevant job related experience Skills, Abilities & Other Requirements Build and maintain a working knowledge of electrical theory and applicable industry standards including IEEE/ANSI, NEC, IBC and NFPA.Familiarity with low & medium voltage distribution equipment ratings and designFamiliarity with DC systems, UPS systems, HVAC and pressurizationFamiliarity with interconnect, conduit and cable schedulesAbility to read and interpret electrical specificationsAbility to read and interpret electrical drawings to include single lines, three lines, schematics and wiring diagramsExcellent verbal and written communication skillsCustomer OrientedAble to manage multiple prioritiesPrioritizes and plans work activities; uses time efficiently; plans for additional resources; sets goals and objectives; develops realistic action plans in order to meet deadlines.Problem Solving: Gathers and analyzes information using inquisitive mind, using strong logical, methodical and systematic skillsWork independently with little or no supervisionAbility to learn new skills and assume new responsibilitiesVisio / Auto CAD / InventorMicrosoft Office Suite Working & Environmental Conditions Working Conditions Temperature controlled working environment. Some outside activities may be required.This position may travel out-of-town to attend training and meetings.Typical office environment: may experience minor discomfort from extensive use of a computer display and keyboard; travel between buildings on campus and between campuses. Physical Requirements Maintaining body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs.Sitting, standing and walking for long periods of time.Typing, punching or applying pressure to an object with fingers and palm. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.#LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. We are an Affirmative Action and Equal Opportunity Employer/Vet/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

We are currently seeking a motivated individual to be a part of our growing Powell Automation Division (PAD). This exciting position allows the ability to not only grow professionally but also fuel the future presence of PAD in the automation space! As a member of PAD you will work and collaborate with diverse professionals to apply innovative and creative solutions to solve problems for our clients. Key responsibilities include engineering, testing, maintaining and supporting automation solutions as well as intelligent products in MV/LV switchgear applications. Essential Responsibilities Become proficient in PAD solutions and offeringsReview and interpret client specifications to produce project Functional Design, drawings and test documentation in accordance with the project requirements and Powell standard procedures.Develop relay configuration files using various manufactures such as SEL, GE, Siemens and Beckwith.Design and configure SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC AcSELerator Diagram BuilderUse common industrial communication protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP 3.0, etc.Develop PLC based electrical system monitoring and controls solutions.Participate in and develop documentation for factory and on-site acceptance testing (FAT and SAT respectively), as well as perform start-up and commissioning activities as requiredEnsure that the company’s Health, Safety & Environmental policies and procedures are constantly adhered to all aspects of Site Services.Provide technical guidance to internal and external stakeholders, including after sales support. Minimum Qualifications BS in a technical discipline, preferably an Electrical Engineer, from an accredited institution with a minimum of six (6) + years of relevant work experienceExpertise and experience in at least one of the following is required:Automation and Control systemsProtective Relay programming and commissioningPLC applications for SwitchgearExperience developing, integrating, installing, and commissioning industrial control systems using PLC and HMI solutions.Experience with PLC logic programming and HMI programming. Experience with Rockwell, Schneider, Siemens, and ABB software a plusExperience with common industrial protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP3, Profibus, etc.Knowledge of 3 phase power is requiredExperience configuring, testing, and commissioning relays. Experience with SEL, GE, and Siemens microprocessor relays is plus. Skills, Abilities & Other Requirements Excellent customer relation, verbal, and written communication skillsStrong analytical and trouble shooting skillsAble to work effectively in a team setting or independently, able to adapt to change, self-starter, innovative, and willing to make a differenceAble to mentor less experienced engineersWillingness to travel locally at least 25% More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. We are an Affirmative Action and Equal Opportunity Employer/Vet/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Powell is hiring a Senior Manufacturing Engineer in Southeast Houston! Our Manufacturing Engineers are the process owners that design and improve processes and procedures used for the manufacturing of Powell engineered to order products. This position is required to identify and implement processes that improve safety, quality, and operating efficiency in a manner that supports the objectives of the Business Unit. Posted position does not allow for sponsorship or relocation. Job Description Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators.Oversees multiple capital project completion simultaneously and balances all phases of projects with varied complexity.Ability to impact project from inception to completion with a focus on handling major expense controlsDevelops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors.Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout.Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes.Knowledge of facility maintenance preferred.Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements.Prepares product and process reports by collecting, analyzing, and summarizing information and trends.Provides manufacturing engineering information by answering questions and requests.Maintains product and company reputation by complying with government regulations.Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service.Completes design and development projects by training and guiding technicians.Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.Contributes to team effort by accomplishing related results as needed. Minimum Qualifications BS Degree in Manufacturing or Industrial Engineering.Minimum 3-7 years of experience in a Manufacturing Engineer role.Experience with either the Toyota Production System or Lean Manufacturing.Project Management experience, leading multi-disciplined teams.Proven track record of completing process improvements from conception through final implementation and ramp-up.Familiar with statistical test procedures and corrective action techniques.Excellent mechanical and electrical systems aptitude. Understanding of pneumatic, hydraulic, and servo positioning systems, as well as machine controls.Project involvement and organizational skills to handle multiple priorities. Skills, Abilities, & Other Requirements Demonstrated proficiency with computer skills using Oracle and MS Office Suite.Demonstrated success with specifying, implementing, and manufacturing equipment.Demonstrated mechanical aptitude.Advanced knowledge using drafting/CAD skills with the ability to create and modify Factory Layouts.Knowledge and/or previous experience with production line setup for new products.Knowledge of ISO 9001 Quality System.Demonstrated written and verbal communication skills.Demonstrated simple analytical and problem-solving ability.Ability to implement designs and solutions.Able to follow directed instruction.Able to lead change and respond to tactical changes.Able to prioritize and manage time effectively. (Self-motivated and self-managing). Working & Environmental Conditions The employee typically performs duties in a normal office environment. There may be some work in a manufacturing environment and exposure to the elements of our factory. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities.It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs, and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. We are an Affirmative Action and Equal Opportunity Employer/Vet/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Position Summary Powell’s products include class-leading vacuum circuit breakers, monitoring, sensing and control electronics, communications and software systems, switchgear, motor control, and safety-focused enclosure systems. Powell’s 75-year leadership in vacuum switching technology and arc-flash safety is widely known and in use globally, while being designed and manufactured in multiple facilities in the US, Canada and the UK. One of our three Houston-area manufacturing facilities also includes a prototyping shop and UL-certified high voltage and high current lab, where you will be able to model and validate the performance of your designs in real time. Essential Responsibilities •Propose concepts and develop complex level designs for both existing and new product lines. •Develop innovative designs that meet profit, cost, quality, and time-to-market metrics. •Determine and specify design parameters, validate according to standards, and prepare documentation. •Investigate patentable concepts. •Participate in validation and testing of components/system or assemblies in the development and validation process. •Develop test plans based on Process/Design failure mode and effects analysis (D/PFMEA), project specifications, industry standards, and reliability and validation requirements for both internal and external laboratories. •Participate in laboratory testing, analysis of data, and create corrective action plans. •Ensure project designs meet requirements of specification and standards while promoting error-proof assembly. •Prepare written documentation of processes, material requirements, test results, and project activity as required. •Understand and enforce regulatory document requirements. •Interface with outside vendors, consultants, and customers. •Work with third-party vendors to develop high-quality, lowest-cost design options. •Continuously improve engineering processes including, Design for Excellence (DFX) project and product costs, quality, and project lead times. •Collaborate and provide Engineering support to Sales/Product Management and Manufacturing on new products and processes. •Participate in and facilitate the Product Development Process. Minimum Qualifications •Bachelor’s Degree in Electrical, Mechanical Engineering or Power Engineering. •4+ years of progressive experience in Engineering design and/or development on technical and innovative projects. Strong technical knowledge in the following categories per discipline: •Electrical: schematics, wiring, circuit breakers, instrument transformers, distribution systems, power systems (low/medium voltage). •Mechanical: Molded Components or Mechanism Design, castings, and metal fabricated parts. •Working knowledge of electromechanical product design and development. •Working knowledge of switchgear and/or controls. •Experience with medium/high voltage electrical power systems preferred. •Experience creating and reviewing DFMEA and PFMEA process and documents preferred. •Experience developing projects within a Stage-Gate Process. Skills, Abilities & Other Requirements •Ability to work with a multi-discipline team (electrical, civil, mechanical, fabrication, operations, sales, etc.) •Ability to explain ideas and concepts to others with diverse levels of specialty and background •Able to prioritize and manage time effectively. (Self-motivated and self-managing). •Demonstrated analytical and problem-solving ability. •Participation in industry organizations (associations, standards committees, etc.) to stay informed of and to influence industry activities a plus. •Proven experience with computers; Microsoft Office, Microsoft Project, or equivalents. •Ability to write/edit technical documents, test reports, engineering standards, industry technical papers. •Demonstrated verbal and written communication skills. •Ability to quickly respond to strategic and tactical changes. *Occasional overnight travel required (10%-20%) of the time. Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in our manufacturing shop facilities, as well as on our electrical test lab. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. We are an Affirmative Action and Equal Opportunity Employer/Vet/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.

Powell's Electrical Division is currently hiring an Electrical Engineer to join the team! We are located in Jacintoport- Houston, TX and are hiring immediately! To develop custom engineered solutions using non-standard applications of Powell standard products to safely and economically meet customer specifications. Posted position does not provide visa sponsorship or relocation. Job Description To create standard products with reference of using customer specifications to design Powell standard products.Design Power Control Rooms using Electrical Standards.Read and interpret customer job specifications.Order materials.Create drawings.Transmit drawings to shop and customer.Interface with sales, customer (with supervisor) and shop.Completed task are check by more senior engineers. Job Requirements BS Degree in Electrical Engineering, Electrical Technology or related area.Minimum 0-3 years of experience in an Engineering role.Ability to interact on a regular basis with shop personnel.Able to apply product knowledge and technical skills to solve simple application problems independently with minimum supervision.Basic computer skills using Oracle, Word, Excel.Ability to order material electronically.Advanced drafting/CAD skills, AutoCad preferredProficient with electrical design and circuitry.Able to read and interpret electrical symbols, characters, and modify drawings.Able to apply (told by others what it means and which code) NEC, ANSI, and Other as it applies to the day to day activity.Basic understanding of power system and relay applications as applied to products.Ability to apply industry standards as applicable to job and product.Innovative to improve existing products.Able to design one product in the most economical way while achieving quality.Attend in house and outside training sessions.Attend local professional associations.Learn policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products.Perform other related duties as assigned. Required Experience Is Proportionate With the Selected Job Level The Engineer level requires a Bachelor’s degree in an engineering discipline and 0-3 years of relevant job related experienceThe Senior Engineer level requires a Bachelor’s degree in an engineering discipline and 4-8 years of relevant job related experienceThe Lead Engineer level requires Bachelor’s degree in an engineering discipline and 7-10 years of relevant job related experience Working & Environmental Conditions The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities.It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, carry or operate objects, tools or controls and reach with hands and arms. The employee frequently is required to stand; talk or hear; walk; sit. Specific vision abilities required by this job include close vision and the ability to adjust focus. #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. We are an Affirmative Action and Equal Opportunity Employer/Vet/Disability If you need an accommodation in the hiring process, you may contact . Application status inquiries will not be accepted in this manner.