Webster, TX 77598 • (18.3 miles) • Full Time • 9/11/2026

Job Title: Hardware Systems Safety EngineerJob DescriptionThe Hardware Systems Safety Engineer performs comprehensive hazard and safety analyses for aerospace hardware and flight systems, ensuring that all safety requirements are clearly defined, tracked, and verified. This role collaborates closely with verification and validation teams to maintain robust system-level control strategies, including fault detection, isolation, and recovery, and supports the articulation of system hazards and mitigation controls to key stakeholders such as NASA.ResponsibilitiesPerform detailed hazard analysis for aerospace hardware systems and flight systems to identify potential safety risks and failure modes.Conduct safety analysis to evaluate the impact of hardware and system failures and define appropria

Houston, TX • (34.2 miles) • Full Time • 9/11/2026

Civil Engineer (5+ Years Experience) – Houston, TXPosition SummaryWe are seeking a Civil Engineer with 5+ years of experience to join our team in Houston, Texas. This position will support the planning, design, and development of land development and site infrastructure projects. The ideal candidate will have experience preparing civil engineering plans, coordinating with project teams, and managing project deliverables from concept through construction.ResponsibilitiesDesign and prepare plans for land development projects, including grading, drainage, paving, utility, and stormwater systems.Perform engineering calculations, site layout design, and permitting support.Prepare construction documents, technical reports, and project specifications.Coordinate with clients, municipalities, utili

Houston, TX • (34.2 miles) • Full Time • 9/11/2026

As anFPGAEngineer in our Oil & Gas division, you will develop high-reliability digital systems for demanding environments, such asdownholedrillingtools,subseainstrumentation, orrefinerymonitoringsystems. You will leverageVHDLto implement complexdata acquisitionandsignal processingalgorithmsthat must operate under strict power and thermal constraints. A significant portion of this role involveshands-on lab validationto ensure system integrity before deployment in remote or hazardous field locations.Key Responsibilities:Ruggedized Design:Implement synthesizableVHDLcode optimized for low power consumption and high-temperature stability (e.g., surviving 150°ree;C+ for downhole applications).High-Reliability Validation:Lead hardware-in-the-loop (HIL) testing in the lab to simulate harsh fiel

Houston, TX 77040 • (42.5 miles) • Full Time • 9/11/2026

To be immediately considered, send your resume to and call us! Position SummaryWe are seeking an experienced Drafter (Manufacturing Drafting & Detailing professional) to prepare accurate 2D shop drawings and submittal packages for steel and concrete-related fabrication projects. This position will also support basic project coordination, including RFIs, scheduling, revisions, approvals, and communication with internal teams and customers from takeoff through release to the shop.ResponsibilitiesPrepare accurate 2D fabrication and shop drawings for anchor bolts, templates, base plates, embeds, and grating layouts.Review and interpret structural and concrete plans, specifications, schedules, and related project documents.Prepare, submit, and track RFIs and coordinate responses with customers,

Houston, TX 77060 • (44.4 miles) • Full Time • 9/11/2026

Company Logo Overview Suncoast Post Tension, Ltd., a Keller company, is an established post-tension company that has been in business for over 30 years. We supply construction related materials to builders from one of our eight facilities in the US. We are looking for a Structural Engineer or EIT to join our team.Responsibilities Lead in the design of multifamily foundations & residential single family home foundationsFunctioning as an internal liaison on constructability issues, design changes, construction problems, and other implementation issues that arise during the construction processPrepare repair procedures for damaged concrete/post-tensioning as neededOversee inspections of foundations and prepare inspection reports as neededQualifications BS degree in Civil/Structural Engineerin

Houston, TX 77006 • (31.1 miles) • Full Time • 9/11/2026

BSA is seeking a strategic and collaborative Director of Engineering to lead our national engineering discipline, including mechanical, electrical, plumbing, and low voltage technology. In this role, you will drive technical excellence and performance across projects that support healing, learning, and discovery. You’ll partner closely with architecture, interior design, and planning teams to deliver high-quality, integrated solutions while shaping the future of engineering at BSA.What You’ll DoOversee national engineering operations, including staffing, project delivery, and financial performance.Lead, manage, and hold Engineering Leads accountable, fostering a high-performing and collaborative environment.Ensure consistent execution of core project delivery processes, driving quality, cl

Houston, TX • (34.2 miles) • Full Time • 9/11/2026

This role is for a Mechanical Engineer who want to design industrial transmission equipment and be part of the repair and maintenance team.

Houston, TX • (34.2 miles) • Full Time • 9/11/2026

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates. No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT.Commercial Construction Project Engineer- 2027Job Description:Build your future in construction management by joining our award-winning HITT Futures Program as a commercial construction project engineer (PE) at a top national general contractor. Our PE role is designed for college graduates, Veterans, and people as passionate as we are about elevating the business of building. This opportunity provides an immersive, on-site experience with tailored training topics and a structured, one-year development plan

Houston, TX 77008 • (35.4 miles) • Full Time • 9/11/2026

NETWORK ENGINEERMERGER & ACQUISITION NETWORK INTEGRATIONLocationApproximately up to 50% onsite at corporate HQ, Houston, TexasTravelApproximately up to 50% to company locations, offices, data centers, and field sites, including yards, shops, and construction or utility sitesHoursCutover and maintenance work frequently falls in evening and weekend windowsNETWORK ENGINEER POSITION SUMMARY We are seeking a Network Engineer to support its Merger and Acquisition (M&A) program. This is a hands-on role for an engineer who works directly in network devices assessing acquired environments, building and configuring standard equipment, executing site cutovers, and troubleshooting through to resolution. The work is project-based and spans the full delivery lifecycle discovery, documentation, bill of m

Sugar Land, TX • (29.6 miles) • Full Time • 9/10/2026

Production Engineering Technician Automation Personnel Services is seekinga highly organized and detail-orientedProcess Technician for a company based in Sugar Land,Texas.The Production Technician will play a key role in maintaining smooth and continuous production line operations. This position focuses on operating automated equipment, performing routine calibrations, identifying and troubleshooting equipment and process issues, and supporting engineers in root cause and failure mode analysis. The Production Technician will work closely with Production and Process Engineers to ensure equipment performance, product quality, and overall manufacturing efficiency meet company standards. Pay Rate $18.00 - $24.00 an hour Schedule and Hours Monday - Wednesday and Sunday 7:00 AM to 7:00 PM Thursd

Houston, TX 77063 • (33.5 miles) • Full Time • 9/10/2026

Job descriptionAbout the Role:G&G is looking for a talented Civil Designer/Drafter to join their growing team in Houston, TX. This is an exciting opportunity to work on civil engineering projects where your design skills and technical expertise will make a real impact. Responsibilities:Develop detailed civil engineering designs and construction drawings using AutoCAD Civil 3DCreate and manage alignments, profiles, corridors, grading, and surface modelsCollaborate with engineers and project managers to deliver accurate and timely design deliverablesPrepare plan and profile sheets, site plans, and utility layouts for civil infrastructure projectsRequirements:Proficiency in AutoCAD Civil 3D is required2+ years of experience in civil design or draftingExperience with land development, roadway,

Houston, TX 77061 • (24.4 miles) • Full Time • 9/10/2026

Electrical Engineer III Important: This position is based in our Houston, TX office near Hobby Airport, and both the position and interview process require candidates to be available to work and interview in our Houston office. This is a primarily hands-on role supporting our engineering, laboratory, and manufacturing operations.About the Role Heath Consultants is seeking an experienced Electrical Engineer III to join our Product Engineering team. In this role, you will play a key part in the design, development, testing, and support of sophisticated embedded electronic instrumentation and systems used in the natural gas utility industry.This is a hands-on engineering position for someone who enjoys working across the boundaries of electronics, embedded firmware, instrumentation, sensing,

Houston, TX • (34.2 miles) • Full Time • 9/10/2026

1SLBJP00004167Job Title: DCN Mechanical DesignerLocal Houston Candidates OnlyA Hybrid work model - In Office on Monday and Wednesday and every other FridayPay Range $45 - $63/hrComputer Skills:Mastery knowledge and proficiency in:Microsoft Office 365 Suite (Outlook, Word, Excel, PowerPoint, Teams, SharePoint)PDF Editor (Adobe, Foxit, or other equivalent)Solid Works (required)Autodesk AutoCADNavisworks Manager / FreedomJob descriptionThe role of Mechanical / Structural Designer is to support the Engineers and Engineering Manager in providing 3D models, drawings and equipment BOM as per customer requirements independently.The Mechanical / Structural Designer will support the service personnel in solving problems by simulating the problems in drawings. The Mechanical / Structural Designer wil

Jersey Village, TX • (44.4 miles) • Full Time • 9/10/2026

CNC Programmer Location: Jersey Village, TXWork Arrangement: On-siteEmployment Type: Full-timeCompensation: $25-$35/hourPosition Summary Our client is seeking an experienced CNC Programmer with strong Mastercam skills to create and optimize CNC programs from customer drawings. This is a hands-on programming role within a job shop environment serving the oil & gas industry, with exposure to AS9100-certified manufacturing and both small and large precision-machined components.The ideal candidate is self-motivated, detail-oriented, and able to work closely with machinists, supervisors, quality, and other production personnel to ensure jobs are programmed efficiently and correctly. Fanuc controls experience is required, as all machines utilize Fanuc controls.Key Responsibilities Create and mod

Houston, TX 77007 • (33.5 miles) • Full Time • 9/9/2026

USCG 3rd Assistant EngineerJob Summary We are seeking a highly skilled USCG 3rd Assistant Engineer to join a deepwater semi-submersible drilling rig operating in the Gulf. This is a direct-hire opportunity designed for an experienced engineer with offshore watchstanding background and proficiency in managing large diesel-electric power plants. The role involves overseeing the safe operation, monitoring, and maintenance of the rig’s engine room systems, ensuring continuous power and operational efficiency in a demanding offshore environment. If you are ready to contribute your expertise to a dynamic team and thrive in a challenging setting, we encourage you to apply now.ResponsibilitiesStand engine room watch and assist with the safe operation of the rig’s power plant and auxiliary machiner

Houston, TX • (34.2 miles) • Full Time • 9/9/2026

Onsite at one of the following BV offices 5 days/week. Specify worker location in submittal:Overland Park, KSAnn Arbor, MIBloomington, MNDallas, TXDenver, COHouston, TXOrlando, FLPhoenix, AZCary, NCTualatin, ORWe are seeking a Power System Protection Engineer with 5-10 years' experience to join our Protective Relay Settings team. The ideal candidate has significant working experience and knowledge of Protection & Control (P&C) design concepts, relay setting calculations / setting file development, relay manufacturer software platforms, and power system analysis & modeling software.Skills5-10 years of experience in the Transmission industry.Previous working experience with Protection & Control design concepts including one-lines, three-lines, schematics, wiring, etc.5 years of experience in

Rosharon, TX 77583 • (12.3 miles) • Full Time • 9/9/2026

Electrical Engineer Position Purpose:Responsible for maintaining, troubleshooting, improving, and ensuring the reliability and safety of all electrical systems and equipment within the manufacturing facility.Key Responsibilities:* Lead electrical maintenance, troubleshooting, and preventive maintenance activities.* Ensure electrical equipment operates safely, reliably, and according to specifications.* Troubleshoot PLC, VFD, motors, sensors, control panels, instrumentation, and industrial electrical systems.* Develop and maintain preventive and predictive maintenance programs.* Support production during electrical breakdowns and minimize equipment downtime.* Analyze recurring failures and lead root-cause analysis (RCA) and corrective actions.* Manage electrical projects, modifications, ins

Sugar Land, TX • (29.6 miles) • Full Time • 9/9/2026

Job Overview:Pay Range: $30.00hr - $34.00hrRequirement/Must Have:High School Diploma or equivalent required.5+ years of experience as an Electro-Mechanical Technician or in a closely related technical field.Strong knowledge of electrical circuits and electronic troubleshooting.Strong knowledge of hydraulic systems and hydraulic circuit troubleshooting.Strong knowledge of mechanical maintenance and repair practices.High mechanical aptitude and problem-solving skills.Basic computer proficiency and ability to learn software applications used for equipment diagnostics and operations.Ability to work independently and in a team environment.Responsibilities:Troubleshoot, service, and repair electro-mechanical equipment.Diagnose and resolve issues involving electrical and hydraulic systems.Perform

Houston, TX 77056 • (33 miles) • Full Time • 9/9/2026

ETL Data Engineer - ETRM / SSRSHouston, TX | Hybrid | Must Live in the Houston Area | 12+ Month ContractiSphere is looking for an ETL Data Engineer who knows their way around SQL Server, SSIS, Python, and ETRM data and can step into a fast-moving energy environment without needing six months to figure out how everything connects.This is a hands-on consulting role supporting a team that works heavily with data pipelines, data warehousing, reporting, and Energy Trading and Risk Management systems. You will be building, improving, and supporting the data flows that move information between trading, operational, reporting, and analytical platforms.A strong Microsoft SQL Server and SSIS background is essential here. You should be comfortable designing databases, tuning queries, writing stored p

Houston, TX • (34.2 miles) • Full Time • 9/9/2026

ENGINEER (Mechanical Design or Aerospace Engineer) with GD&T / Gas Turbine Hardware/Bearings expierienceLength: 6-12 monthsType: ContractLocation: Houston, TXPay rate: DOE - Please include your hourly rate and availability along with your resume submission if you have the required experience needed for this role.We currently have a 6-12 month contract assignment for a degreed engineer with GD&T and Gas Turbine hardware (bearings)working on-site at our clients location in Houston, TX. My client is looking for someone with the skill set belowVarious responsibilities.Skills:GD&TKnowledge of Gas Turbine hardware, especially bearingsWindchill and Solidwork CADIPB and IRM verseStack-upIf you have the skill set needed for this role, please email your resume to Jeff Flynn - along with your availab

Houston, TX 77008 • (35.4 miles) • Full Time • 9/9/2026

Approximately 50% of the time onsite at corporate headquarters in Houston, Texas.Approximately 50% travel to acquired company locations, offices, data centers, and other field sites as required.Travel may include short-term onsite assignments, installation and cutover support, troubleshooting, and post-integration stabilization.This assignment will be supporting M&A network integration and operations.Primarily focused on hands-on operational support, troubleshooting, implementation, site onboarding, and customer assistance.Work may include Houston-based support, travel to acquired locations, equipment installation, and scheduled maintenance windows.The resource will collaborate closely with network, security, infrastructure, service desk, M&A, and business teams.

Baytown, TX • (36.6 miles) • Full Time • 9/9/2026

Position SummaryThe Pump Technician is a hands-on position responsible for the inspection, maintenance, troubleshooting, repair, testing, and commissioning of diesel driven pumps and related rental equipment both in the shop and at customer job sites. This position plays a critical role in maintaining a high level of equipment reliability, safety, and quality to ensure customer satisfaction.Duties and Responsibilities· Conduct inspections of diesel-driven pumps and related equipment to determine operational condition and identify required maintenance or repairs.· Diagnose mechanical, hydraulic, fuel system, cooling system, and light electrical issues using appropriate troubleshooting techniques and diagnostic tools.· Perform preventative maintenance activities, including fluid changes, fil

Houston, TX 77040 • (42.5 miles) • Full Time • 9/9/2026

CDS has quickly grown to be one of the largest independent document and information technology providers in the United States with locations in NYC, Philadelphia, Washington DC, Baltimore, Baton Rouge, Houston, and beyond!As we look forward to the future, we continue to invest heavily in our people, technology, product, and service offerings to ensure we continue to provide the best customer, partner, and employee experiences possible.

Houston, TX 77041 • (42.9 miles) • Full Time • 9/9/2026

Why Join Ford AV?For over 50 years, Ford AV has helped shape how people experience spacesthrough sound, video, and innovation. We work with leading businesses, universities, and public institutions across the U.S. to bring technology to life.At Ford AV, you’ll find:Real opportunities to grow your skills and your careerHands-on training and industry certificationsA steady, supportive team environmentCompetitive pay, full benefits, and 401(k) matchDescriptionThe Project Engineer designs and oversees sound, video, lighting, and acoustical systems, ensuring alignment with customer specifications and profitability goals. Responsibilities include creating technical drawings, testing system performance, and simplifying complex technical concepts for clients and teams. Collaboration with Project M

Houston, TX 77047 • (22.2 miles) • Full Time • 9/8/2026

Custom Air Products & Services, Inc. (CAPS)is a Houston-based, full-service HVAC company specializing in the design, fabrication, installation, and servicing of industrial and commercial air conditioning and heating systems. Since 1996, CAPS has built a reputation for delivering high-quality, custom-engineered solutions to customers across a wide range of industries.With a team of skilled professionals and multiple Texas-based facilities, CAPS provides end-to-end capabilities including HVAC manufacturing, mechanical field services, and parts distribution. As part of AirX Climate Solutions, we are committed to safety, quality, and customer satisfactioncreating a team-oriented environment where employees can grow, contribute, and support essential operations across the industries we serve.We

League City, TX 77573 • (17.9 miles) • Full Time • 9/8/2026

Field Additive TechnicianAbout the RoleCargo Correction Services, Inc. (CCS) is seeking a highly motivated Field Additive Technician to join our growing team. This position is responsible for performing fuel additive injections, cargo treatment services, chemical transfers, quality assurance activities, and related field operations at refineries, terminals, marine facilities, pipelines, and customer locations throughout the Gulf Coast and beyond.The ideal candidate is safety-focused, mechanically inclined, dependable, and capable of responding to both scheduled and emergency service requests. This is a hands-on position offering significant growth opportunities within a rapidly expanding company serving the energy and petrochemical industries.Key ResponsibilitiesPerform on-site fuel additi

Stafford, TX 77477 • (28.5 miles) • Full Time • 9/7/2026

Groundwater & Environmental Services, Inc. (GES), an industry leader with a reputation for excellence in providing environmental consulting, engineering, compliance, and technical field services to clients in diverse market sectors, seeks an experienced Environmental Engineer to support environmental remediation project activities. This position is located in Houston, TX, with travel expected around Texas and Louisiana.Responsibilities:Prepares remediation plans and specifications to determine the most appropriate environmental solutions to problems.Performs remedial system design for smaller-scale projects under the supervision of a Professional Engineer.Oversees installation and operation and maintenance of remedial systems, including preparing field work orders, system evaluations and u

Houston, TX • (34.2 miles) • Full Time • 9/5/2026

Structural EngineerQualifications:• Bachelor of Science Degree in Civil Engineering, with an emphasis in Structural Engineering• Minimum of 2 years of experience in structural engineering (we are hiring for multiple different levels with the highest level requiring a minimum of 10 years experience)• Experience with US building codes including IBC, ASCE 7, ACI and AISC• Experience with Structural Engineering analysis software, Navisworks and Bluebeam• Experience designing and analyzing traditional steel and concrete structures• Excellent written and verbal communication skills• Strong interpersonal skillsWorking Conditions and Requirements• Your home location must be in USA Northwest Region (AK, ID, MT, OR, WA, WY) or Canada• Employee to provide internet service as required at home to effec

Baytown, TX • (36.6 miles) • Full Time • 9/5/2026

The duties of the Mechanical Engineer position will include:• Research, develop, design, test and implement the installation of the mechanical system for welding and repair welding of line pipe.• Apply knowledge of Submerged Arc, Gas Metal Arc Welding (GMAW), Plasma Arc, Tungsten Inert Gas (TIG) and Heli Arc Welding to maintain and improve the welding functions in both fabrication of pipe and maintenance of plant facilities.• Direct engineering and maintenance personnel in the mechanical functions associated with the manufacturing of pipe and the maintenance of the plant and equipment.• Develop procedures to provide efficient and economical distribution of mechanical power and provides management with guidance as to power factors, usage and modernization of mechanical equipment.• Evaluate

Rosenberg, TX 77471 • (39.7 miles) • Full Time • 9/5/2026

? We are hiring an experienced CNC Programmer to develop, prove out, and optimize programs for our 5-axis milling centers and 9-axis mill-turn centers using Esprit EDGE. This is a hands-on role you will program the job, set up the machine, run the first article, and own the process through to production release. Strong candidates are programmers who came up through the shop floor and still like being on it.KEY RESPONSIBILITIES? - Develop CNC programs in Esprit EDGE for 5-axis simultaneous milling and mill-turn with B-Axis Swivel Head (turning, live tooling, sub-spindle, Y-axis)? - Import and work from customer models and prints STEP, IGES, SolidWorks, DXF, PDF? - Select tooling, design and specify workholding and fixturing? - Edit, tune, and maintain post-processors for Kitamura and Mori S

Houston, TX • (34.2 miles) • Full Time • 9/5/2026

Axess North America is seeking a motivated and experienced Project Engineer - Crane and Lifting to join our team. The successful candidate will be responsible for managing and coordinating crane and lifting projects, ensuring the safe, efficient, and successful execution of operations while maximizing the financial performance of each project in accordance with contract requirements.This role involves project planning, resource coordination, client communication, and oversight of operational activities to ensure projects are delivered on time, within budget, and in compliance with all applicable safety and quality standards. The Project Engineer will work closely with clients, offshore and onshore personnel, subcontractors, and internal stakeholders to support project execution and drive c

Pasadena, TX • (25.7 miles) • Full Time • 9/4/2026

Laser Applications EngineerLocation: Houston, TXTravel: Up to 70% throughout the United StatesKinetic Cutting Systems is a respected manufacturer of high-end fiber laser and plasma cutting systems. We are committed to innovation, engineering excellence, and delivering advanced cutting solutions that help manufacturers improve productivity and profitability.If you're passionate about advanced manufacturing technology and enjoy working with innovative equipment while helping customers succeed, we'd love to hear from you. This is an opportunity to work with a company that continues to develop industry-leading machinery and cutting solutions.Position SummaryYou must have experience with cutting metal using CNC fiber laser cutting systems.We are seeking a motivated and hands-on Laser Applicatio

Pasadena, TX • (25.7 miles) • Full Time • 9/4/2026

GCT Inspection, Inc. (Pasadena, Texas; thexraycompany.com) is a long-established NDT company founded in 1976. It provides radiography (film and digital, lab and field), ultrasonic testing, magnetic particle, liquid penetrant, visual inspection, hardness testing, PMI, leak detection, and related quality services to the refining, chemical processing, and power industries.An NDT Level II role there is a hands-on field and shop technician position focused on performing and evaluating inspections to codes such as ASME, AWS, and API. The company has posted specifically for multi-certified Level II technicians, with a strong emphasis on ultrasonic weld inspection plus supporting methods and radiation safety.Typical Position TitleNDT Level II Technician (often listed as NDT Level II UT Technician)

Houston, TX • (34.2 miles) • Full Time • 9/4/2026

Talascend is currently seeking anEnvironmental Water Engineer for a long-term contract opportunity with our client in Houston, Texas.OverviewThis role involves developing and reviewing environmental and water treatment engineering deliverables to support project execution in an office setting. The engineer will collaborate with various stakeholders to ensure compliance and technical accuracy across environmental and water treatment tasks.ResponsibilitiesPlan, execute, and review environmental engineering deliverables, including basis documents, permit support, and compliance matricesDevelop environmental basis documents, discharge criteria, and environmental design inputsCoordinate with permitting, environmental, engineering, construction, client, and other stakeholders to resolve interfac

Houston, TX • (34.2 miles) • Full Time • 9/4/2026

Desktop/Network (IT) Administrators: this probably is NOT the job for you, but it may be for your friend or neighbor. Feel free to send them our information!We are seeking a Field Service Technician to join our Associated Time Instruments (TIBA Parking Systems) team!You are an ideal candidate if you have previously worked on parking equipment, security system installations and service or access automation/control and you like working outdoors. This position will require on-call duties.What we expect of you (as assigned and scheduled):On-site service and maintenance for our parking and access control hardware and software installations in the Minneapolis area.Provide support for multiple productsNeed to have knowledge of electronics and mechanical devices and PC computer skillsWork with var

Houston, TX 77040 • (42.5 miles) • Full Time • 9/4/2026

Clayton Services is searching for a Building Engineer to join a thriving company in Northwest Houston. The Building Engineer will be responsible for maintaining, troubleshooting, and supporting the safe and reliable operation of multiple commercial facilities, with a strong emphasis on HVAC systems, building automation, preventative maintenance, and general building systems.Job Type: Direct Hire or Temp-to-HirePay Rate: $30.00 -$35.00/hour plus discretionary bonusBenefits: Medical, dental, vision, 401(k) w/ match, paid time off, life insurance, and additional company benefits and perksBuilder Engineer Responsibilities:Perform preventative maintenance, troubleshooting, and repairs on commercial building systems and equipment.Maintain and troubleshoot HVAC equipment, including rooftop units,

Webster, TX 77598 • (18.3 miles) • Full Time • 9/3/2026

Vitesse Systems is looking for an Embedded Firmware Engineerto join the team! The Embedded Firmware Engineer will work with a talented multidisciplinary team of engineers to help design cutting edge robotic systems and electromechanical hardware for clients in a wide variety of industries with applications on earth and outer space.About Vitesse SystemsVitesse Systems is a leading provider of highly engineered antenna, thermal management and mission critical solutions used in radar, electronic warfare and C5ISR applications. No challenge is too difficult for the Vitesse Team. From complex specification driven requirements to precision manufactured components, Vitesse Systems has the experience and expertise needed to execute.Our Core ValuesOur core values of Integrity, Initiative, Impact, a

Houston, TX 77012 • (28.8 miles) • Full Time • 9/3/2026

Backed by an over 130-year history, Ecovysthas evolved into a platform of leading sulfur solutionsunited by a shared commitment to reliability, innovation, and performance. We have carefully cultivated our reputation as a premier provider of virgin sulfuric acid, sulfuric acid regeneration services, and sulfuric acid derivatives. We provide specialty grade high-purity virgin sulfuric acid for a number of diverse and growing end uses. Among them are mining, particularly copper for electronics applications, production of electric vehicles and the ongoing expansion of data centers across the globe, and industrial applications including our customers’ production of nylon precursors, production of lead acid batteries for all types of vehicles, industrial and municipal water treatment, and refin

Houston, TX 77041 • (42.9 miles) • Full Time • 9/3/2026

DESCRIPTION/RESPONSIBILITY:SpaceManager Closets has built, installed, and stood behind custom closets and storage solutions in Houston for over 28 years. We manufacture in-house. We install with our own crews. We back every project with a lifetime transferable warranty. We are not a franchise. We are not a big-box upsell. We are the real thing -- and we are growing.We are currently seeking an experienced CAD / Cabinets Drafter to join our team. We serve the high-end residential market in Houston, Texas with premium quality custom closets, cabinets and home organization systems. The CAD / Cabinets Drafter will be responsible for executing accurate and timely production of drawings and CNC code and production drawings. Creating layouts / BOM for the shop to produce machine & build from and c

Galveston, TX 77554 • (21.6 miles) • Full Time • 9/3/2026

Job DescriptionJob Description:\n\n \n Engineer Positions Available:\n Chief Engineer (CHE) \n Minimum endorsement as a national chief engineer (limited) of motor-propelled vessels of less than 1600 gross registered tons (GRT) upon near coastal without a horsepower limitation \n Pay Rates:\n 12-hour day: $365.65 \n 24-hour day: $731.30\n Chief Engineer (DDA)\n Minimum endorsement as a national designated duty engineer of motor propelled vessels of less than 500 gross registered tons (GRT) upon near coastal without a horsepower limitation \n Pay Rates:\n 12-hour day: $324.25\n 24-hour day: $648.90\n Assistant Engineer (DDL) / Engineer Trainee\n Minimum endorsement as a national assistant engineer 6000 HP or national designated duty engineer of motor propelled vessels of less than 4000 HP pf

Houston, TX • (34.2 miles) • Full Time • 9/2/2026

Position OverviewWe are seeking a highly capable Thermal Design Engineer to lead the thermal and hydraulic design of shell-and-tube heat exchangers and related heat transfer equipment using HTRI software. In this role, you will serve as a key technical resource supporting projects from proposal development through design, manufacturing, testing, and customer delivery.The ideal candidate brings strong expertise in heat transfer, fluid flow, and process engineering, along with a practical understanding of industry standards such as TEMA and ASME Section VIII. You will work closely with customers and cross-functional teams to develop reliable, manufacturable, and cost-effective thermal solutions for demanding industrial applications.Essential Duties and ResponsibilitiesKey Responsibilities· L