Longview, TX • (5.7 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Gilmer, TX 75644 • (25 miles) • Full Time • $16.00 / hr • 10/7/2026

Applied Metallurgical is seeking a dependable, detail-oriented Grinding Team Member to join our foundry’s cleaning and finishing department. You’ll learn to remove excess metal and finish iron castings in preparation for inspection, machining, and other production steps. No prior foundry experience is required. We’re looking for someone who takes pride in hands-on work, follows instructions, and wants to grow their manufacturing skills. What You’ll Do: Use grinders and finishing tools to remove flash, parting lines, and remaining gate and riser material. Follow finishing standards while preserving the casting’s shape and required surfaces. Inspect castings for visible defects and report quality concerns. Check tools, guards, and abrasives before use and r

Longview, TX • (5.7 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Gilmer, TX 75644 • (25 miles) • Part Time • $30.00 to $40.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced part-time Industrial Painters to paint manufactured cast iron components. This is a great opportunity for a skilled painter looking for consistent supplemental income with a limited weekly commitment. You'll handle the painting process from setup and surface preparation through spraying, inspection, cleanup, and equipment storage. Schedule: 2 sessions per week, approximately 4 hours each Job Duties Include: Prepare and stage parts for painting Operate a Graco airless spray system Mix and apply coatings according to specifications Inspect finishes and complete touch-ups Clean and maintain spray equipment Keep the work area clean and organized Follow all safety, PPE, coating-handling, and waste-disposal procedures Benef

Longview, TX • (5.7 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Gilmer, TX 75644 • (25 miles) • Full Time • $25.00 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for experienced Electrical/Mechanical Maintenance Technicians to join our steel foundry team. This is a hands-on position for someone who enjoys troubleshooting equipment, making repairs, and working on a wide variety of electrical and mechanical systems. You’ll play an important role in keeping plant equipment operating safely, reliably, and efficiently. Job Duties Include: Troubleshoot and maintain single-phase and three-phase motors Work with low-voltage control systems and motor starters Troubleshoot and maintain pumps and cooling systems Diagnose electrical issues involving compressors, cranes, cooling towers and bucket elevators Install and maintain electrical conduit Work with compressed air and water plumbing systems Perform

Longview, TX • (5.7 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Gilmer, TX 75644 • (25 miles) • Full Time • $16.50 to $18.50 / hr • 9/22/2026

Applied Metallurgical is expanding and looking for a dependable, hands-on CNC Machine Shop Assistant to join our Foundry and Machine Shop team. This is an entry-level opportunity for someone who wants to learn, work with their hands, and build valuable skills in a precision machine shop. You’ll work alongside experienced machinists and CNC operators while learning how parts are prepared, machines are set up, and quality products are produced. Job Duties Include: Assist experienced CNC operators and machinists with daily shop activities Prepare and move materials and parts Help with machine setup and production Load and unload parts from machines Inspect finished parts and perform basic quality checks Help keep machines, tools, and work areas clean and organized Assist with basic

Longview, TX 75605 • (9.3 miles) • Full Time • 10/8/2026

W&B Service Company has an excellent opportunity for a Transport Refrigeration Technician. We are the largest transport refrigeration dealer of Carrier Transicold, a world leader in Truck, Trailer and rail refrigeration systems. We are also the nation’s largest full service Hyundai Translead trailer dealer. We have 21 facilities throughout the Southwest, including Texas, Arkansas, Louisiana and Oklahoma.Duties will include:Perform diagnostics and repair starting and charging system, cooling and re-charge, and electrical including common fault codes. Repairs include performing leak detection procedures, compressor replacements, soldering refrigerant lines, evaporator/condenser replacements and front & rear main engine seal replacements.Perform repair and maintenance on reefer units in accor

Tyler, TX 75702 • (38.8 miles) • Full Time • 10/8/2026

Are we the road to your future?We are currently searching for a Junior level and Senior level CAD Technicianto support ourSouthwest Regionlocated inAustin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX.The ideal candidate will be responsible for coordination and oversight of geometric design projects.What you’ll be doing:Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projectsContribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plansPrepare minor mathematical calculations and quantity calculations for roadway/bridge projectsWork with engineers to develop 3D models using both OpenRoads DesignerResearch applicable desig

Kilgore, TX 75662 • (13.8 miles) • Full Time • 10/8/2026

Revolution is now hiring for an Extrusion Manager position in Kilgore, TX. Here is an excellent opportunity for individuals looking for a challenging opportunity with a growing company.RESPONSIBILITIES/ DUTIES:Directs and coordinates activities of production department(s) in processing materials or manufacturing products in industrial organization by performing the following duties personally or through subordinate supervisors.Analyzes production schedule to estimate worker hours and create machining schedules that meet both internal and external customer needs.Reviews production schedules to ascertain product data such as types, quantities and specifications of products and scheduled delivery dates in order to plan department operations and establishes priorities and sequences for manufac

Shreveport, LA 71129 • (42.9 miles) • Full Time • 10/8/2026

Job descriptionBuild the infrastructure that powers AI and the cloud.Talent Clout is hiring Electro-Mechanical Assemblers for our client, a global energy technology company growing its Data Center Infrastructure Solutions business. You'll build modular data center systems in a clean, controlled indoor factory, working on advanced equipment that ships to customers around the world.If you like working with your hands, enjoy figuring out how things fit together, and take pride in quality work, we want to hear from you.What You'll DoAssemble electrical and mechanical components using the correct tools and fixturesTest finished assemblies, then troubleshoot and fix issuesRead blueprints and drawings to identify parts and build to specMeasure parts and assemblies to meet required tolerancesUse h

Longview, TX 75605 • (9.3 miles) • Full Time • 10/8/2026

About the Role:BASS Corrosion Services, Inc., is seeking a full-time Cathodic Protection Engineer (PE) to support and expand our cathodic protection design services. BASS is a full-service contractor specializing in cathodic protection and corrosion control solutions for pipeline, utility, industrial, power generation, and infrastructure clients.In addition to construction and installation services, BASS provides technical support including annual surveys, rectifier inspections, atmospheric corrosion assessments, cathodic protection system evaluations, interference testing, and integrity-related consulting services.BASS routinely provides cathodic protection design services for new pipeline systems, facilities, tanks, and other infrastructure. We are also a trusted partner in developing pr

Gilmer, TX 75645-7877 • (25.3 miles) • Full Time • 10/8/2026

About Company: Integrity Services TX LLC is a trusted, Texas-based oilfield service company built on hard work, reliability, and doing the job right the first time. We provide a full range of field services to the upstream and midstream energy sectors across Texas and the surrounding region.Our core services include: General oilfield construction and supportRoustabout crews and facility maintenanceRight-of-way (ROW) clearing and reclamationPipeline installation, maintenance, and integrity workDirt construction – lease roads, location pads, reserve pits, containment ponds, and commercial site prepExcavation, grading, and heavy equipment operationsFounded and still operated with a strong emphasis on safety, quality, and customer relationships, Integrity Services TX has earned a reputation fo

Longview, TX • (7.4 miles) • Full Time • 10/7/2026

At E Tech Group, joining our team means joining a group of passionate and forward-thinkingexperts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries.Our national and global scaleallows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site.We are seeking an enthusiastic and experienced Automation Engineer tobe responsible for leading or contributing to detailed hardware and software design of process automation control syst

Kilgore, TX 75662 • (13.8 miles) • Full Time • 10/7/2026

CHEP helps move more goods to more people, in more places than any other organization on earth via our 347 million pallets, crates and containers. We employ approximately 13,000 people and operate in 60 countries. Through our pioneering and sustainable share-and-reuse business model, the world’s biggest brands trust us to help them transport their goods more efficiently, safely and with less environmental impact.What does that mean for you? You’ll be at the frontline of CHEP in a busy, demanding job. Our supply chain team isn’t part of our business. It’s the heart of our business. And you can be the power behind it. We connect 300,000 supply chains for some of the world’s biggest and best-loved brands. You’ll learn new ways of working, with automation and new technology that’ll help you ge

Tyler, TX • (39.1 miles) • Full Time • 10/7/2026

Company Description Tyler Pipe is hiring Foundry Production Workers to perform various job duties based on their assigned production area. These duties include operating, monitoring, controlling, maintaining, cleaning machinery used in the process of producing cast iron pipe and fittings. Most common job assignments for new hires are Core Machine Operator, Casting Processor, or Pipe Processor.Job Description Foundry Production Worker (Actual job will be assigned at New Hire Orientation and is based on the production needs at that time.)Location:Tyler, TXPay:Pay Rage $22.44 - $27.20/hourShift:Most openings are 2nd ShiftWhat You’ll Do:Complete the job duties related to their assigned work area such as: Operator machinery to make fitting cores.Grind fittings to remove excess iron and prepare

Tyler, TX 75707 • (31.8 miles) • Full Time • 10/6/2026

Position SummaryThe Entry-Level Maintenance Technician supports the preventive, predictive, and corrective maintenance of production equipment and facility systems in a Pre-Engineered Metal Building (PEMB) manufacturing plant. Working under the guidance of experienced technicians and supervisors, this role helps keep fabrication equipment running safely and reliably while learning the skills needed to minimize downtime and support on-time production of structural steel frames, secondary members, and metal building components.Key ResponsibilitiesPerform routine and preventive maintenance on manufacturing equipment, including press brakes, shears, plasma tables, saws, welding equipment (manual and robotic), overhead cranes, and material-handling systems.Help troubleshoot, diagnose, and repai

Tyler, TX • (39.1 miles) • Full Time • 10/5/2026

Role OverviewCandidate must understand SMT terminology. This person must be knowledgeable of SMT components types and their package size. The operator should be experienced with the total SMT process from set-up, feeders, programming knowledge, stencil, manual and automated printing, solder paste, and reflow ovens. Skills include a comprehensive understanding of IPC standards.Key ResponsibilitiesThe SMT operator will run and maintain the SMT equipment (paste printer, pick and place,reflow). Operator will also be expected to program jobs.Job Description:Duties include operating, maintenance, and any associated tasks related to SMT. Responsibilities will vary and it is expected this individual will be ableto operate and maintain equipment other than SMT equipment.This person must be capable

Longview, TX 75602 • (0 miles) • Full Time • 10/5/2026

DescriptionThis Engine Shop Service Technician position is responsible for performing inspections, diagnoses, and repairs of diesel-powered or natural gas industrial engines or related components, following established procedures and guidelines. Can work independently or as a member of a team to provide mechanical services that satisfies customer needs and achieves departmental goals. Our address is 2210 Legacy Parkway, Longview, TX 75602.Mid-level position – Generally has more than four years of experience and/or demonstrated job relevant knowledge/skills. A Level III Technician has moderate knowledge of the field’s standard and technical concepts, practices, and procedures. Level III Technician performs a variety of standard, complex, and technical tasks; is indirectly supervised and sel

Longview, TX • (7.4 miles) • Full Time • 10/5/2026

Commercial Refrigeration InstallerPosition Overview Our client is seeking a Commercial Refrigeration Installer to support supermarket refrigeration installation projects throughout Texas. This position is responsible for installing refrigerated cases, walk-in coolers and freezers, refrigeration rack systems, piping, evaporator coils, controls, electrical components, and associated equipment. The position requires approximately 90% travel, with installers typically working out of town during the week and returning home on weekends.The ideal candidate has hands-on commercial refrigeration installation experience and the technical ability to contribute independently in the field. There is no specific minimum years-of-experience requirement, with demonstrated knowledge and ability carrying gre

Kilgore, TX 75662 • (13.8 miles) • Full Time • 10/5/2026

Who are we?National Refrigeration and Air Conditioning Canada Corp. is a leading North American manufacturer of commercial refrigeration products marketed under the KeepRite Refrigeration brand name. These products include specialized applications in food storage and processing, industrial process cooling, including evaporator coils, condensing units, condensers, heat transfer and heat recovery and air conditioning products. From the smallest unit to the very largest, KeepRite Refrigeration brings experience and commitment to the refrigeration industry - beginning with product design and engineering and continuing through manufacturing, sales and after-market support. KeepRite Refrigeration products have been manufactured and distributed worldwide for 80 Years.About the Role:We are seeking

Marshall, TX 75672 • (21.2 miles) • Full Time • 10/5/2026

American Wood Fibers (AWF) is a manufacturer of both consumer and industrial products that are sold to multiple manufacturers as well as pet, agricultural, and home-heating markets. AWF is comprised of 450+ employees and holds operations at 11 locations, generating over $100M in annual sales revenue. We are currently seeking a candidate for the 1st Shift Millwright/Industrial Maintenance Tech (Manufacturing)role in our Marshall, Texasfacility.JOB SUMMARYThe Millwright/Industrial Maintenance Tech will operate in a safe and efficient manner of troubleshooting and repairing equipment and machinery. The primary duties include:MAINTENANCEPerforms scheduled maintenance repairs of production equipment and provides emergency/unscheduled repairs of production equipment during production. Prepares a

Tyler, TX 75706-6031 • (39.1 miles) • Full Time • 10/5/2026

The role of the Advanced Millwright is to actively assist in work on mechanical projects. When not involved in field installation projects, this position will be involved in day-to-day shop fabrication activities required by Arc N Spark. This position will require advanced skill and knowledge of all mechanical tenants and possess a good understanding of how to read blueprint drawings and specifications. This position will be involved in basic cutting, grinding, fitting and welding on a daily basis. Successful candidate must be able to efficiently communicate and collaborate with all Arc N Spark entities.Attention!!!This position is REQUIRED to work weekends.There will be multiple positions hired from this posting.Minimum Qualifications:Must be able to complete all job positions below Advan

Longview, TX • (7.4 miles) • Full Time • 10/3/2026

Are you and experienced quality engineer who would like to work for a global supplier of medical devices that is just over an hour outside of Dallas TX and offers very competitive salary, benefits, bonus and relocation assistance if required. Thispositionwillberesponsibleforthequalityprocessincludingcriticalprocesscharacteristics,standards, audits, complaint resolutions, training and laboratory functions related to FDA 21 CFR 820, FSSC22000, and ISO13485:2016.Ensure integration of quality systems to ensure a common quality system throughout the facility and share best practices across the North American plant locations.Provide manufacturing personnel with quality systems and tools to allow effective evaluation of products and processes.Ensure the application of advanced quality tools to pr

Tyler, TX 75703 • (41.5 miles) • Full Time • 10/3/2026

Job Summary:The Mechanical Engineer performs calculations, develops data sheets of equipment, prepares RFQ, and technical bid assessment. They generate technical clarification by interacting with vendors and suppliers to get the most optimum design according to project specifications, codes, and industry standards. They analyze technical issues and come up with cost effective design solutions to solve them.Responsibilities:Provide mechanical engineeringexpertisein theearly stagesof design and product developmentInvestigate and analyze complex mechanical design and construction problems for assigned projectsProvide technical review of mechanical engineering design calculations, analyses, drawings and specifications to ensure compliance with project objectives and standardsCollect and review

Longview, TX 75601 • (5.2 miles) • Full Time • 10/3/2026

Overview We are hiring for several precision machining openings with local manufacturers:Manual MachinistCNC Mill and Lathe MachinistsCNC ProgrammersIf you take pride in tight tolerances and quality parts, we want to hear from you.Mill and Lathe Machinist ResponsibilitiesSet up and run CNC and manual mills and lathes to make precision parts.Set up jobs, edit programs, and prove them out on conversational controls.Choose tooling, set offsets, and set up fixtures.Adjust feeds, speeds, and offsets to hold tolerance.CNC Programmer ResponsibilitiesWrite, edit, and optimize CNC programs for machining centers and lathes.Program with conversational controls, G-code, and CAM software.Prove out new programs and first-article parts.Reduce cycle times and improve tooling strategies.Support machinists

Longview, TX 75602 • (0 miles) • Full Time • 10/2/2026

Other Forms of Compensation: Yearly Bonus OpportunityGrowth. Opportunity. Excellence.Fresh & Ready Food Group is a member of Canteen. Canteensets the national standard forexcellencein automated retail, andEVERYsegment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel ourgrowth.YOUbring enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.TOGETHERwe’ll continue transforming the micro-market, dining, coffee, and vending industry.Come grow with us. We are Canteen.Job Summary:The Production Manager (Ready-to-Eat Foods) is responsible for planning, directing, and coordinating daily production operations within a food manufacturing facility. This role ensures the efficient preparation and ti

Longview, TX 75604 • (10.7 miles) • Full Time • 10/2/2026

Benefits:Competitive salaryHealth insurancePaid time offJob Summary: We are seeking a skilled and experienced Commercial Refrigeration Installer to join our team. The ideal candidate will be responsible for installing commercial refrigeration systems in various settings. Benefits/PerksCompetitive pay based on experience.Health, dental, life and vision insurance.Paid time off (PTO).401(k) retirement plan with company match.Company-provided vehicles, some tools, and phone allowance for work purposes.Responsibilities:Install commercial refrigeration systems, ensuring proper operation and compliance with safety standards.Perform diagnostic tests and troubleshoot systems during installation.Conduct routine inspections and maintenance to prevent malfunctions.Adhere to safety protocols and local/

Tyler, TX 75706 • (37.7 miles) • Full Time • 10/2/2026

SNELLING is currently recruiting for a CNC Machinist for a manufacturing company in the Tyler area with a pay rate of $18.00 to $32.00/hr. Schedule is Monday-Friday during standard day shift hours. We are seeking an independent proactive CNC Machinist to set up, operate, and adjust CNC mills and lathes to produce precision components. This role requires strong attention to detail and the ability to work efficiently with minimal supervision. Key Responsibilities: Set up, adjust, and operate CNC mills and lathes to machine parts to specifications.Measure finished workpieces using precision instruments (micrometers, calipers, gauges) to ensure conformance.Mount, install, and align tools, fixtures, and workpieces using hand tools and precision measuring instruments.Stop machines to remove fini

Daingerfield, TX 75638 • (39 miles) • Full Time • 10/2/2026

The Bullpen Catcher plays a vital role in supporting the training and development of athletes across professional, collegiate, and youth levels. This individual is responsible for assisting with on-field activities, providing athlete support, coordinating sessions, and maintaining a high-performance environment. The role offers valuable exposure to performance training and player development, with opportunities for advancement into coaching and administrative positions.ResponsibilitiesAssist with daily training setup, flow, and breakdown in the bullpenSupport professional, collegiate, and youth athletes during warm-ups and drillsTrack athlete throwing performance and development dataCoordinate session schedules and communicate with athletesMaintain a clean, organized, and efficient bullpen

Longview, TX 75602 • (0 miles) • Full Time • 10/1/2026

Salary: $70,000 - $75,000 / yearOther Forms of Compensation: Yearly Bonus OpportunityGrowth. Opportunity. Excellence.Fresh & Ready Food Group is a member of Canteen. Canteensets the national standard forexcellencein automated retail, andEVERYsegment of our business is thriving.We employ the best team in the industry and their dedication, collaboration and passion fuel ourgrowth.YOUbring enthusiasm, customer service, and commitment; we’ll supply theopportunityand innovation.TOGETHERwe’ll continue transforming the micro-market, dining, coffee, and vending industry.Come grow with us. We are Canteen.This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘job search’ in PeopleHub to refer your referral and email them a link

Longview, TX • (7.4 miles) • Full Time • 10/1/2026

The Materials Engineer works in conjunction with the Engineering Manager or Sr. level Engineer. The Materials Engineer is responsible for maintaining existing material designs and may work on the development, validation, release and launch of new materials, working in a cross-functional team environment. Responsibilities also include: continuous improvement of current production products/processes, assistance with manufacturing process improvement, customer concerns, warranty analysis, and supplier development. Main material focus is with rubber compounds and process chemicals for metal preparation for rubber bonding.What You’ll Do:Promote the STEMCO / Enpro Culture by exhibiting the five principles of exemplary leadership: Modeling the Way, Inspiring a Shared Vision, Enabling Others to Ac

Lone Star, TX 75668 • (31.2 miles) • Full Time • 10/1/2026

Experienced CNC Programmers Only This Is NOT an Operator PositionA&E Machine Shop, Inc. | Lone Star, TX$27.00–$36.00/hour, based on experience | Full-Time | In PersonPLEASE READ BEFORE APPLYINGA&E Machine Shop, Inc. is hiring an experienced CNC Programmer who can independently program, set up, and operate CNC equipment.You must have previous hands-on CNC programming experience to be considered for this position.This position is NOT intended for candidates whose CNC experience is primarily:Loading and unloading material or componentsPressing cycle start and monitoring a machineRunning programs written by someone elseMaking basic offset adjustments onlyPerforming production operator duties without programmingAssisting another machinist with setupsWe need a machinist who can receive a bluepri

Scottsville, TX 75688 • (24.8 miles) • Full Time • 10/1/2026

Prysmian is the global leader in energy and telecom cable systems. Every year, we manufacture thousands of miles of underground and submarine cables for power transmission and distribution, as well as medium and low voltage cables for construction and infrastructure. We also produce a full range of optical fibers, copper cables, and connectivity solutions for voice, video, and data transmission. With over 30,000 employees across 50+ countries, Prysmian is transforming how the world connects and powers its future. At every level, our people are empowered to make an impact. Join us and Make Your Mark.Lead Transformation at a Global Industry Leader:Prysmian, the world’s largest manufacturer of energy and telecom cables, is seeking a seasoned executive to lead our largest manufacturing facilit

Waskom, TX • (34.6 miles) • Full Time • 10/1/2026

Title: Plant Manager Location: Waskom, TX Overview: Sterling has helped build careers for thousands of professionals like yourself. Our expert recruiters support you at every step in the process and as a Best of Staffing company, Sterling provides exciting work with exceptional employers across the U.S. Hire Type: Direct Hire Benefits: Benefits from day 1 with almost 100% coverage! In addition to 11 paid holidays, 2-3 weeks vacation, 401K, etc. Target Salary:$95,000-130,000 Bonus/ Incentives/ Stock Options: up to 20% annual bonus Job Summary:Responsible for the overall performance of a manufacturing facility, including safety, production, quality, delivery, and financial results. This role leads day-to-day plant operations while partnering with engineering, quality, supply chain, and other

Hughes Springs, TX 75656 • (38.7 miles) • Full Time • 9/30/2026

Production Assembler Job DescriptionFood production assemblers mainly consist of preparing meals, working in a team on the production line to ensure food products meet desired quality and safety standards. You are expected to perform diverse duties being that all our departments have different assignments. Storing food, mixing ingredients, properly cutting vegetables and meats. Studying orders and making preparations for the day. As well as putting together trays of food, and assuring everything is neatly put together.SkillsProduction assemblers are required to stand for long periods of time in cold temperatures.Physical strength is an important skill being able to lift and carry heavy food supplies.Basic kitchen skillsRepeatedly hand gestures Education, Experience, and Licensing Requireme

Henderson, TX 75652 • (16.3 miles) • Full Time • 9/30/2026

This position is located at the West Fraser Lumber Mill located in Henderson, Texas. The Industrial Manufacturing Electrician will be responsible for troubleshooting, correcting, and maintaining all electrical equipment within the manufacturing facility.Responsibilities include but not limited to:Test electrical systems and circuits in electrical wiring, equipment, or fixturesInspect electrical systems, equipment, or components to identify hazards, defects, or repairTroubleshoot, program, and upgrade Programmable Logic Controllers (PLC)Work with vendors to identify needed parts and recommend to SupervisorUnderstand and update instrumentation loop diagrams, E & I drawings, blueprints, and schematicsProgram AC & DC variable speed driversUpdate power distribution system, MCC, and switch gears

Hawkins, TX 75765 • (36 miles) • Full Time • 9/30/2026

OverviewPrimo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.Factory Location: Hawkins, TX Compensation: $24.39 / hour Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule:6:00am - 6:30pm on a 2-2-3 rotation6:00pm - 6:30am on a 2-2-3 rotation Ability to work holidays and weekends per business needsBenefits of working for Primo Brands:Health Benefits:Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA, heath savings account (HSA)Retirement/Investing

Marshall, TX 75670 • (15.5 miles) • Full Time • 9/29/2026

Principal Duties & Responsibilities:Prysmian is seeking a Production Supervisor to lead manufacturing operations on an assigned shift in our Marshall, TX facility. This role is responsible for leading hourly production employees, driving safety, quality, productivity, and delivery performance while developing a high-performing team culture. This position is also responsible for effectively managing cross-functional relationships with other departments to support effective use of manpower, materials, and equipment, as well as productivity improvement initiatives.This position leads a team of approximately 27 employees on our 2nd shift (3:00 PM - 11:00 PM). The ideal candidate enjoys being on the manufacturing floor, coaching employees, solving problems, and driving safety, quality, and prod

Shreveport, LA 71129 • (42.9 miles) • Full Time • 9/29/2026

Assembler:This is an exceptional opportunity to work with an Oil&Gas Services company in Shreveport, Louisiana.Job Description:Pay Rate: Starting at $18 / hour or more, depending on experience plus overtime, Medical, Dental and Vision under a W-2 Contract to Hire.Available Shift:Day Shift: 7am - 5:30pm (Monday - Thursday) With some mandatory overtime on Fridays.Night Shift: 5pm - 3:30am (Monday - Friday) - $3 shift diff. With some mandatory OT on Friday night into Saturday morning.All contractors must train on the weekday day shift (Monday - Friday, 7am - 5:30pm) for at least 3 weeks and then will be moved to the night shift during the week or stay on the weekday day shift if that is the shift they were hired for.Job Summary:The Assembly and Test Operator is responsible for assembling and